Elasto‐plastic model for cement‐treated sand

This paper presents an elasto‐plastic model for non‐linear analyses of cement‐treated sand. Various laboratory tests were systematically carried out to investigate the pre‐peak and post‐peak behaviours of a cement‐treated sand. On the basis of these experimental results, the new model was built within the framework of a relatively simple elasto‐plastic theory. Two failure criteria are employed to express tensile and shear failure characteristics observed in the experimental results of the cement‐treated sand. The proposed model can describe strain‐hardening and strain‐softening responses under both failure modes. In the strain‐softening rules, the smeared crack concept is used, and a characteristic length is considered to avoid the issue of mesh‐size dependency. Since the failure criterion and strain‐hardening/softening rules are based on the experimental evidences, the model is relatively easy to understand and the parameters used in the model have clear physical meaning. The proposed model was applied to simulate the behaviour of cement‐treated sand in various laboratory tests, allowing for a reasonable comprehensive evaluation. It was demonstrated that the proposed model is suitable for describing both the tensile and shear failure behaviours of cement‐treated sand. Copyright © 2006 John Wiley & Sons, Ltd.     

A self‐consistent approach for micro–macro modeling of elastic–plastic deformation in polycrystalline geomaterials

This paper is devoted to multi‐scale modeling of elastic–plastic deformation of a class of geomaterials with a polycrystalline microstructure. We have extended and improved the simplified polycrystalline model presented in [Zeng T. et al., 2014. Mech. Mater. 69 (1):132–145]. A rigorous and fully consistent self‐consistent (SC) scheme is proposed to describe the interaction among plastic mineral grains. We have also deeply discussed the numerical issues related to the numerical implementation of the proposed micromechanical model. The efficiency of the proposed model and the related numerical procedure is evaluated in several representative cases. We have compared the numerical results respectively obtained from the fully SC model and two simplified ones. It is found that the SC model produces a softer stress–strain response than that of the simplified models. The comparisons between the estimation of overall behavior of a granite in different loading conditions and experimental data are also conducted. Copyright © 2015 John Wiley & Sons, Ltd.     

A finite strain closed‐form solution for the elastoplastic ground response curve in tunnelling

The ground response to tunnel excavation is usually described in terms of the characteristic line of the ground (also called ‘ground response curve’, GRC), which relates the support pressure to the displacement of the tunnel wall. Under heavily squeezing conditions, very large convergences may take place, sometimes exceeding 10–20% of the excavated tunnel radius, whereas most of the existing formulations for the GRC are based on the infinitesimal deformation theory. This paper presents an exact closed‐form analytical solution for the ground response around cylindrical and spherical openings unloaded from isotropic and uniform stress states, incorporating finite deformations and linearly elastic‐perfectly plastic rock behaviour obeying the Mohr–Coulomb failure criterion with a non‐associated flow rule. Additionally, the influence of out‐of‐plane stress in the case of cylindrical cavities under plane‐strain conditions is examined. The solution is presented in the form of dimensionless design charts covering the practically relevant parameter range. Finally, an application example is included with reference to a section of the Gotthard Base tunnel crossing heavily squeezing ground. The expressions derived can be used for preliminary convergence assessments and as valuable benchmarks for finite strain numerical analyses. Copyright © 2014 John Wiley & Sons, Ltd.     

A closed form analytical solution for two‐dimensional plane strain consolidation of unsaturated soil stratum

This paper discusses the excess pore‐air and pore‐water pressure dissipations and the average degree of consolidation in the 2D plane strain consolidation of an unsaturated soil stratum using eigenfunction expansion and Laplace transformation techniques. In this study, the application of a constant external loading on a soil surface is assumed to immediately generate uniformly or linearly distributed initial excess pore pressures. The general solutions consisting of eigenfunctions and eigenvalues are first proposed. The Laplace transform is then applied to convert the time variable t in partial differential equations into the Laplace complex argument s. Once the domain is obtained, a simplified set of equations with variable s can be achieved. The final analytical solutions can be computed by taking a Laplace inverse. The proposed equations predict the two‐dimensional consolidation behaviour of an unsaturated soil stratum capturing the uniformly and linearly distributed initial excess pore pressures. This study investigates the effects of isotropic and anisotropic permeability conditions on variations of excess pore pressures and the average degree of consolidation. Additionally, isochrones of excess pore pressures along vertical and horizontal directions are presented. It is found that the initial distribution of pore pressures, varying with depth, results in considerable effects on the pore‐water pressure dissipation rate whilst it has insignificant effects on the excess pore‐air pressure dissipation rate. Copyright © 2015 John Wiley & Sons, Ltd.     

One‐dimensional analytical solution for mesoscopic flow induced damping in a double‐porosity dual‐permeability material

Heterogeneities, such as fractures and cracks, are ubiquitous in porous rocks. Mesoscopic heterogeneities, that is, heterogeneities on length scales much larger than typical pore size but much smaller than the wavelength, are increasingly believed to be responsible for significant wave energy loss in the seismic frequency band. When a compressional wave stresses a material containing mesoscopic heterogeneities, the more compliant parts of the material (e.g., fractures and cracks) respond with a greater fluid pressure than the stiffer portions (e.g., matrix pores). The induced fluid flow, resulting from the pressure gradients developed on such scale, is called mesoscopic flow. In the present study, the double‐porosity dual‐permeability model is adopted to incorporate mesoscopic heterogeneities into rock models to account for the attenuation of wave energy. Based on the model, the damping effect due to mesoscopic flow in a one‐dimensional porous structure is investigated. Analytical solutions for several boundary‐value problems are obtained in the frequency domain. The dynamic responses of infinite and finite porous layer are examined. Numerical calculations show that the damping effect of mesoscopic flow is significant on the pore pressure response and the resulting effective stress. For the displacement, the effect is seen only at the very low frequency range or near the resonance frequencies. Copyright © 2017 John Wiley & Sons, Ltd.     

A novel analytical solution for constant‐head test in a patchy aquifer

A mathematical model describing the hydraulic head distribution for a constant‐head test performed in a well situated at the centre of a patchy aquifer is presented. The analytical solution for the mathematical model is derived by the Laplace transforms and the Bromwich integral method. The solution for the hydraulic head has been shown to satisfy the governing equations, related boundary conditions, and continuity requirements for the hydraulic head and flow rate at the interface of the patch and outer regions. An efficient numerical approach is proposed to evaluate the solution, which has an integral covering an integration range from zero to infinity and an integrand consisting the product and square of the Bessel functions. This solution can be used to produce the curves of dimensionless hydraulic head against dimensionless time for investigating the effect of the contrast of formation properties on the dimensionless hydraulic head distribution. Define the ratio of outer‐region transmissivity to patch‐region transmissivity as α. The dimensionless hydraulic head for α=0.1 case is about 2.72 times to that for α=10 case at dimensionless large time (e.g. τ?10⁶) when the dimensionless distance (ρ) equals 10. The results indicate that the hydraulic head distribution highly depends on the hydraulic properties of two‐zone formations. Copyright © 2006 John Wiley & Sons, Ltd.     

The method of fundamental solution for 3‐D wave scattering in a fluid‐saturated poroelastic infinite domain

By using a complete set of poroelastodynamic spherical wave potentials (SWPs) representing a fast compressional wave P_I, a slow compressional wave P_II, and a shear wave S with 3 vectorial potentials (not all are independent), a solution scheme based on the method of fundamental solution (MFS) is devised to solve 3‐D wave scattering and dynamic stress concentration problems due to inhomogeneous inclusions and cavities embedded in an infinite poroelastic domain. The method is verified by comparing the result with the elastic analytical solution, which is a degenerated case, as well as with poroelastic solution obtained using other numerical methods. The accuracy and stability of the SWP‐MFS are also demonstrated. The displacement, hoop stress, and fluid pore pressure around spherical cavity and poroelastic inclusion with permeable and impermeable boundary are investigated for incident plane P_I and SV waves. The scattering characteristics are examined for a range of material properties, such as porosity and shear modulus contrast, over a range of frequency. Compared with other boundary‐based numerical strategy, such as the boundary element method and the indirect boundary integral equation method, the current SWP‐MFS is a meshless method that does not need elements to approximate the geometry and is free from the treatment of singularities. The SWP‐MFS is a highly accurate and efficient solution methodology for wave scattering problems of arbitrary geometry, particularly when a part of the domain extends to infinity.     

A finite strain solution for the elastoplastic ground response curve in tunnelling: rocks with non‐linear failure envelopes

This paper generalizes the finite strain Coulomb solution of Vrakas and Anagnostou (Int J Numer Anal Meth Geomech 2014; 38(11): 1131–1148) for the classic tunnel mechanics problem of the ground response curve to elastoplastic grounds satisfying a non‐linear Mohr's failure criterion. A linear (Coulomb‐type) plastic potential function is used, leading to a non‐associated flow law, and edge plastic flow is considered in the plastic zone. The solution for a general non‐linear Mohr's failure criterion is semi‐analytical in that it requires the evaluation of definite integrals. In the special case of the Hoek–Brown criterion, however, these integrals are calculated analytically, resulting in a rigorous closed‐form series solution. The applicability of the derived solution is illustrated through the example of the Yacambú‐Quibor tunnel, where very large deformations were observed when crossing of weak graphitic phyllites. Copyright © 2016 John Wiley & Sons, Ltd.