红河断裂带两侧地震震源机制及构造意义

红河断裂带是一条大型的走滑断裂带。根据印支半岛前新生代的古地块与华南地块的接触关系 ,将红河断裂带海陆部分分为两段。断裂带自第三纪以来 ,经历了左旋运动、右旋运动 ,南北两段的活动性有一定的差异。根据断裂带两侧地震和震源机制解分析 ,震源深度 0～ 33km的地震在整个区域密集分布 ,较深的地震分布在断裂的北东侧。断裂带西北部断裂活动方式为逆冲型 ,北部为正断型 ,南部为走滑型 ,其它地方为奇异型 ,也即是逆冲型、正断型、走滑型 3种方式的过渡类型 ,反映了红河断裂带及其周围地区受到来自北北西向的推挤力和北东东向的正压力的联合作用 ,使受力区的断裂发生挤压逆冲、水平走滑和拉张正断运动。     

Focal-mechanism solutions of earthquakes and tectonics of the hindukush region

Seventeen focal-mechanism solutions have been obtained for earthquakes occurring in the Hindukush region using P-wave first motion directions observed from short as well as long period records. These solutions have indicated a thrust type of faulting. Some of the solutions show small components of strike slip motions. The trend of nodal planes in these solutions was found to vary between northeast and southeast directions. The dip of the compressional axes rarely exceeds 25°. Orientation of tensional axes was found to be almost vertical in all cases. These findings together with the spatial distribution of earthquakes in the Hindukush region suggested that earthquakes were caused by down-dip extension within a sinking slab.     

EARTHQUAKE FOCAL MECHANISM AND ITS TECTONIC SIGNIFICANCE ALONG THE TWO SIDES OF THE RED RIVER FAULT ZONE

The Red River Fault Zone is a gigantic slide-slip fault zone extending up to 1000km from Tibet to South China Sea. It has been divided into the north, central and south segments according to the difference of the geometry, kinetics, and seismicity on the land, but according to the contacted relationship between the old pre-Cenozoic block in Indochina Peninsula and the South China block, the Red River Fault Zone was divided into two parts extending from land to ocean, the north and south segments. Since the Tertiary, the Red River Fault Zone suffered first the sinistral movement and then the dextral movement. The activities of the north and the south segments were different. Based on the analysis of earthquakes and focal mechanism solutions, earthquakes with the focus depths of 0-33km are distributed over the whole region and more deep earthquakes are distributed on the northeastern sides of the Red River fault. Types of faulting activities are the thrust in the northwest, the normal in the north and the     

On the seismicity and tectonics associated with the Sinkiang—Tibetan region

A plausible seismo-tectonic boundary of the Sinkiang—Tibetan region is defined on the basis of the trend of higher magnitude earthquakes (M7.0) and energy released by them for the period 1905–1965. In order to study the nature of forces at the northwestern and eastern sides of the region focal mechanisms for eleven shocks have been determined using P-wave first-motion directions reported in the Bulletin of the International Seismological Centre (Edinburgh). Of these, seven mechanisms show thrust faulting, three strike-slip and one normal faulting. The sense of motions of underthrusting blocks in thrust-faulting mechanisms for the two sides are directed towards the Sinkiang—Tibetan region. The slip vectors of strike-slip faulting are also in agreement with the direction of movement of thrust faulting. Thus, the seismicity, energy released, slip vectors and the orientation of T-axes reflect that the northwestern and eastern sides of the Sinkiang—Tibetan region are the plausible seismo-tectonic boundary and the major earthquakes and higher crustal thickness are the results of the movements of surrounding plates towards the region.     

Fault-plane solutions and seismicity of the Italian peninsula

A new fault-plane solution map of the Italian peninsula is presented in this paper. The earthquakes analyzed are included in the period 1905–1980, with magnitudes ranging 4–7, 75 earthquakes are located in the crust, while 31 are related to the deep and intermediate zone of the Calabrian arc. The large seismic events of the Italian peninsula are generally associated with normal faulting, while strike-slip motion is mostly related to small earthquakes, located along lateral segments of the mountain chain.The deep and intermediate earthquakes of the Tyrrhenian Sea indicate predominant down-dip compression, and strike-slip motion at the boundaries of this Benioff zone. This last is interpreted as a remnant of a subduction zone, active since Oligocene, extending to 500 km depth, with a very small lateral size (about 300 km). The present tectonics of this Benioff zone is strongly conditioned by the lateral bending, more so than the gravitational sinking process.The coexistence of thrust and normal faulting motion associated to the earthquakes, within a few tens of kilometers of each other, seems to be explained by the strong lateral inhomogeneities of the crustal rocks present in this region, more so than to the depth of the seismogenetic zone and the nature of the faulting process.     

Spatial mapping of earthquake hazard parameters in the Hindukush–Pamir Himalaya and adjacent regions: Implication for future seismic hazard

The study deals spatial mapping of earthquake hazard parameters like annual and 100-years mode along with their 90% probability of not being exceeded (NBE) in the Hindukush–Pamir Himalaya and adjoining regions. For this purpose, we applied a straightforward and most robust method known as Gumbel’s third asymptotic distribution of extreme values (GIII). A homogeneous and complete earthquake catalogue during the period 1900–2010 with magnitude M_W ⩾ 4.0 is utilized to estimate these earthquake hazard parameters. An equal grid point mesh, of 1° longitude X 1° latitude, is chosen to produce detailed earthquake hazard maps. This performance allows analysis of the localized seismicity parameters and representation of their regional variations as contour maps. The estimated result of annual mode with 90% probability of NBE is expected to exceed the values of M_W 6.0 in the Sulaiman–Kirthar ranges of Pakistan and northwestern part of the Nepal and surroundings in the examined region. The 100-years mode with 90% probability of NBE is expected to exceed the value of M_W 8.0 in the Hindukush–Pamir Himalaya with Caucasus mountain belt, the Sulaiman–Kirthar ranges of Pakistan, northwestern part of the Nepal and surroundings, the Kangra–Himanchal Pradesh and Kashmir of India. The estimated high values of earthquake hazard parameters are mostly correlated with the main tectonic regimes of the examined region. The spatial variations of earthquake hazard parameters reveal that the examined region exhibits more complexity and has high crustal heterogeneity. The spatial maps provide a brief atlas of the earthquake hazard in the region.     

The mechanism of induced seismicity at mosul reservoir based on the first motion analysis

In 1986 shortly after the impounding of Mosul reservoir, shallow earthquakes began occurring in the immediate reservoir vicinity, with magnitudes up to ML 3.0, at rates of up to 3 events per week. These events were almost certainly reservoir-induced and coincided with steadily increasing water levels. Cluster of epicenters was observed in the area located within a complex fault zone called the Sinjar-Dohouk-Kuchuk fault system. The presence of such fault system considers a potential source of earthquakes. A composite fault plane solution, based on first p-wave motion analyses, indicates that the mechanisms of seismicity were right-lateral strike-slip faulting along N44°E plane dipping 58° NW, in conformity with the local tectonics.     

The mechanism of induced seismicity at mosul reservoir based on the first motion analysis

In 1986 shortly after the impounding of Mosul reservoir, shallow earthquakes began occurring in the immediate reservoir vicinity, with magnitudes up to ML 3.0, at rates of up to 3 events per week. These events were almost certainly reservoir-induced and coincided with steadily increasing water levels. Cluster of epicenters was observed in the area located within a complex fault zone called the Sinjar-Dohouk-Kuchuk fault system. The presence of such fault system considers a potential source of earthquakes. A composite fault plane solution, based on first p-wave motion analyses, indicates that the mechanisms of seismicity were right-lateral strike-slip faulting along N44°E plane dipping 58° NW, in conformity with the local tectonics.     

Double-sided subduction with contrasting polarities beneath the Pamir-Hindu Kush: Evidence from focal mechanism solutions and stress field inversion

The Pamir-Hindu Kush region at the western end of the Himalayan-Tibet orogen is one of the most active regions on the globe with strong seismicity and deformation and provides a window to evaluate continental collision linked to two intra-continental subduction zones with different polarities. The seismicity and seismic tomography data show a steep northward subducting slab beneath the Hindu Kush and southward subducting slab under the Pamir. Here, we collect seismic catalogue with 3988 earthquake events to compute seismicity images and waveform data from 926 earthquake events to invert focal mechanism solutions and stress field with a view to characterize the subducting slabs under the Pamir-Hindu Kush region. Our results define two distinct seismic zones: a steep one beneath the Hindu Kush and a broad one beneath the Pamir. Deep and intermediate-depth earthquakes are mainly distributed in the Hindu Kush region which is controlled by thrust faulting, whereas the Pamir is dominated by strike-slip stress regime with shallow and intermediate-depth earthquakes. The area where the maximum principal stress axis is vertical in the southern Pamir corresponds to the location of a high-conductivity low-velocity region that contributes to the seismogenic processes in this region. We interpret the two distinct seismic zones to represent a double-sided subduction system where the Hindu Kush zone represents the northward subduction of the Indian plate, and the Pamir zone shows southward subduction of the Eurasian plate. A transition fault is inferred in the region between the Hindu Kush and the Pamir which regulates the opposing directions of motion of the Indian and Eurasian plates.     

Compressive Tectonics around Tibetan Plateau Edges

Various earthquake fault types, mechanism solutions, stress field, and other geophysical data were analyzed for study on the crust movement in the Tibetan plateau and its tectonic implications. The results show that numbers of thrust fault and strike-slip fault type earthquakes with strong compressive stress near NNE-SSW direction occurred in the edges around the plateau except the eastern boundary. Some normal faulting type earthquakes concentrate in the Central Tibetan plateau. The strikes of fault planes of thrust and strike-slip faulting earthquakes are almost in the E-W direction based on the analyses of the Wulff stereonet diagrams of fault plane solutions. This implies that the dislocation slip vectors of the thrust and strike-slip faulting type events have quite great components in the N-S direction. The compression motion mainly probably plays the tectonic active regime around the plateau edges. The compressive stress in N-S or NE-SW directions predominates earthquake occurrence in the thrust and strike-slip faulting event region around the plateau. The compressive motion around the Tibetan plateau edge is attributable to the northward motion of the Indian subcontinent plate. The northward motion of the Tibetan plateau shortened in the N-S direction encounters probably strong obstructions at the western and northern margins.     

Structural evolution and strike-slip tectonics off north-western Sumatra

Based on new multi-channel seismic data, swath bathymetry, and sediment echosounder data we present a model for the interaction between strike-slip faulting and forearc basin evolution off north-western Sumatra between 2°N and 7°N. We examined seismic sequences and sea floor morphology of the Simeulue- and Aceh forearc basins and the adjacent outer arc high. We found that strike-slip faulting has controlled the forearc basin evolution since the Late Miocene. The Mentawai Fault Zone extends up to the north of Simeulue Island and was most probably connected farther northwards to the Sumatran Fault Zone until the end of the Miocene. Since then, this northern branch jumped westwards, initiating the West Andaman Fault in the Aceh area. The connection to the Mentawai Fault Zone is a left-hand step-over. In this transpressional setting the Tuba Ridge developed. We found a right-lateral strike-slip fault running from the conjunction of the West Andaman Fault and the Tuba Ridge in SSW-direction crossing the outer arc high. As a result, extrusion formed a marginal basin north of Simeulue Island which is tilted eastwards by uplift along a thrust fault in the west. The shift of strike-slip movement in the Aceh segment is accompanied by a relocation of the depocenter of the Aceh Basin to the northwest, forming one major Neogene unconformity. The Simeulue Basin bears two major Neogene unconformities, documenting that differences in subsidence evolution along the northern Sumatran margin are linked to both forearc-evolution related to subduction processes and to deformation along major strike-slip faults.     

Tectonics and earthquake mechanism of the shallow earthquake seismic belt,the Himalaya

The foci distribution of upper mantle earthquakes occurred between 1961 and 1972 in Himalayan, Tibetan and Hindukush regions, were studied and compared. The V-shaped pockets above a vertical plane have shown a relationship with the dip-slip type or normal faulting at the borders of the continental plates. The left-lateral and right-lateral displacements of Kirthar-Sulaiman shear zone and Brailly fault respectively found by the focal mechanism indicate a relative difference in motion between the Kashmir region and Nepal region and the uniform and right angle displacement of Tibetan Plateau has produced the Saradah depression. On the basis of seismic and geological evidences a simple tectonic model is proposed.     

Active tectonism in the central Alps: contrasting stress regimes north and south of the Rhone Valley

An integrated interpretation of seismicity, fault plane solutions and deep seismic reflection data suggests that the NE–SW to NW–SE trending Rhone–Simplon fault zone and the gently S-dipping basal Penninic thrust separate fundamentally different stress regimes in the western Swiss Alps. North of the Rhone-Simplon fault zone, strike-slip earthquakes on steep-dipping faults within the Helvetic nappes are a consequence of regional NW–SE compression and NE–SW extension. To the south, vertical maximum stress and N–S extension are responsible for normal mechanism earthquakes that occur entirely within the Penninic nappes above the basal Penninic thrust. Such normal faulting likely results from extension associated with southward movements (collapse) of the Penninic nappes and/or continued uplift and relative northward displacements of the underlying Alpine massifs. Geological mapping and fission-track dating suggest that the two distinct stress regimes have controlled tectonism in the western Swiss Alps since at least the Neogene.     

Middle Pleistocene to Holocene activity of the Gondola Fault Zone (Southern Adriatic Foreland): Deformation of a regional shear zone and seismotectonic implications

Recent seismicity in and around the Gargano Promontory, an uplifted portion of the Southern Adriatic Foreland domain, indicates active E–W strike-slip faulting in a region that has also been struck by large historical earthquakes, particularly along the Mattinata Fault. Seismic profiles published in the past two decades show that the pattern of tectonic deformation along the E–W-trending segment of the Gondola Fault Zone, the offshore counterpart of the Mattinata Fault, is strikingly similar to that observed onshore during the Eocene–Pliocene interval. Based on the lack of instrumental seismicity in the south Adriatic offshore, however, and on standard seismic reflection data showing an undisturbed Quaternary succession above the Gondola Fault Zone, this fault zone has been interpreted as essentially inactive since the Pliocene. Nevertheless, many investigators emphasised the genetic relationships and physical continuity between the Mattinata Fault, a positively active tectonic feature, and the Gondola Fault Zone. The seismotectonic potential of the system formed by these two faults has never been investigated in detail. Recent investigations of Quaternary sedimentary successions on the Adriatic shelf, by means of very high-resolution seismic–stratigraphic data, have led to the identification of fold growth and fault propagation in Middle–Upper Pleistocene and Holocene units. The inferred pattern of gentle folding and shallow faulting indicates that sediments deposited during the past ca. 450 ka were recurrently deformed along the E–W branch of the Gondola Fault Zone.We performed a detailed reconstruction and kinematic interpretation of the most recent deformation observed along the Gondola Fault Zone and interpret it in the broader context of the seismotectonic setting of the Southern Apennines-foreland region. We hypothesise that the entire 180 km-long Molise–Gondola Shear Zone is presently active and speculate that also its offshore portion, the Gondola Fault Zone, has a seismogenic behaviour.     

Transtensional deformation in the Lake Tahoe region, California and Nevada, USA

Dextral transtensional deformation is occurring along the Sierra Nevada–Great Basin boundary zone (SNGBBZ) at the eastern edge of the Sierra Nevada microplate. In the Lake Tahoe region of the SNGBBZ, transtension is partitioned spatially and temporally into domains of north–south striking normal faults and transitional domains with conjugate strike-slip faults. The normal fault domains, which have had large Holocene earthquakes but account only for background seismicity in the historic period, primarily accommodate east–west extension, while the transitional domains, which have had moderate Holocene and historic earthquakes and are currently seismically active, primarily record north–south shortening. Through partitioned slip, the upper crust in this region undergoes overall constrictional strain.Major fault zones within the Lake Tahoe basin include two normal fault zones: the northwest-trending Tahoe–Sierra frontal fault zone (TSFFZ) and the north-trending West Tahoe–Dollar Point fault zone. Most faults in these zones show eastside down displacements. Both of these fault zones show evidence of Holocene earthquakes but are relatively quiet seismically through the historic record. The northeast-trending North Tahoe–Incline Village fault zone is a major normal to sinistral-oblique fault zone. This fault zone shows evidence for large Holocene earthquakes and based on the historic record is seismically active at the microearthquake level. The zone forms the boundary between the Lake Tahoe normal fault domain to the south and the Truckee transition zone to the north.Several lines of evidence, including both geology and historic seismicity, indicate that the seismically active Truckee and Gardnerville transition zones, north and southeast of Lake Tahoe basin, respectively, are undergoing north–south shortening. In addition, the central Carson Range, a major north-trending range block between two large normal fault zones, shows internal fault patterns that suggest the range is undergoing north–south shortening in addition to east–west extension.A model capable of explaining the spatial and temporal partitioning of slip suggests that seismic behavior in the region alternates between two modes, one mode characterized by an east–west minimum principal stress and a north–south maximum principal stress as at present. In this mode, seismicity and small-scale faulting reflecting north–south shortening concentrate in mechanically weak transition zones with primarily strike-slip faulting in relatively small-magnitude events, and domains with major normal faults are relatively quiet. A second mode occurs after sufficient north–south shortening reduces the north–south S_hmax in magnitude until it is less than S_v, at which point S_v becomes the maximum principal stress. This second mode is then characterized by large earthquakes on major normal faults in the large normal fault domains, which dominate the overall moment release in the region, producing significant east–west extension.     

Earthquake mechanisms and tectonics in the Assam-Burma region

Eleven new focal mechanisms from earthquakes in the Assam-Burma region have been determined using P-wave first-motion directions reported in the Bulletins of the International Seismological Centre (Edinburgh). Out of them, eight mechanisms indicate thrust faulting, two normal faultings and one strike-slip faulting. In the thrust type of mechanism solutions, sense of motion on the shallow dipping of the two nodal planes is consistent with underthrusting beneath the arc-like mountain ranges. Seismic slip vectors strike in almost northerly direction along the eastern Himalayas and in almost easterly direction along the Burmese arc. A predominance of thrust faulting is consistent with geological evidences of thrusting and uplift in the Himalayas and the Assam-Burma region.     

Seismicity changes associated with reservoir loading

Changes in seismic activity have been related to the filling of large reservoirs in over thirty cases. These changes range from variations in the level of micro-earthquake activity detectable only with instruments of high sensitivity to destructive earthquakes with magnitudes greater than 6. On the other hand, the filling of many other large reservoirs has not been accompanied by increased seismicity.

A number of factors may contribute to the generation or absence of post-impounding seismicity. Increased vertical stress due to the load of the reservoir and decreased effective stress due to increased pore pressure can modify the stress regime in the reservoir region. Whether or not these stress changes are sufficient to generate earthquake activity will depend on a complex interaction of the induced stress with the state of pre-existing stress near the reservoir, and on the geologic and hydrologic conditions at the site. The combined effect of increased vertical load and increased pore pressure will have the greatest tendency to increase activity in regions where the maximum compressive stress is vertical (normal faulting). In regions where the minimum compressive stress is vertical (thrust faulting) increased stress due to a vertical load should have a minimum effect. For all of the larger reservoir-induced earthquakes the stress system determined from fault plane solutions is in agreement with the pre-existing stress field in the region of the reservoir. These earthquakes are all of strike-slip or normal type, there being no reported cases of large induced earthquakes with thrusting mechanisms.

The potential for major changes in seismicity may be highest in regions of moderate strain accumulation (low to moderate natural seismicity). In areas of high strain accumulation and high levels of natural seismicity, the stress changes induced by the reservoir will be small compared to natural variations. In aseismic areas, with low strain accumulation, the reservoir-induced stresses may be insufficient to raise the stress level to a state of failure.     

A review of the seismicity and seismotectonics of Delhi and adjoining areas

Understanding of seismicity and seismotectonics of Delhi and adjoining areas is essential as these areas lie in the seismic zone IV and are geologically confined to the Delhi Fold Belt (DFB), juxtaposed to the Himalayan Frontal Thrust Fold Belt. Owing to the set-up, seismicity in this area is ascribed to the Himalayan Thrust System and activation of DFB Fault Systems. Considerably improved instrumental seismic monitoring in this area and data analysis had resolved three regions of pronounced seismicity that lie close to Sonepat, Rohtak and western part of the NCT Delhi, attributed to activation of various portions of the fault systems of the DFB. Based on seismic telemetry network data, the seismicity pattern analysis revealed that the Mahendragarh Dehradun Sub-Surface Fault (MDSSF) and Delhi Sargodha Ridge (DSR) are the two major zones of structural importance for the nucleation of seismicity in this region. These revelations were corroborated with the fault plane solution of the earthquakes. The dominant mechanism in nucleation of seismicity in DFB is the thrust with minor strike slip. The seismicity and seismotectonics of Delhi and adjoining areas endemic to activation of DFB is reviewed and presented in this paper.     

Present-day stress field and deformation in eastern Austria

 We analysed fault plane solutions and borehole breakouts in the eastern part of the Eastern Alps and found a heterogeneous stress field which we interpret as a transition zone of three different stress provinces: the western European stress province with NW to NNW S_H orientation and mainly strike-slip faulting regime; the Adriatic stress province with a radial stress pattern and thrust faulting to strike-slip faulting regime; and the Dinaric-Pannonian stress province with NE S_H orientation and strike-slip faulting regime. The western Pannonian basin seems to be a part of the transition zone with WNW to NW S_H orientation. A stress regime stimulating strike-slip faulting prevails in the Eastern Alps. The south Bohemian basement spur as a major tectonic structure with a high rheological contrast to surrounding units has a strong influence on the stress field and exhibits the highest seismicity at its tip due to stress concentration. From a constructed vertical stress orientation profile we found stress decoupling of the Northern Calcareous Alps from the underlying European foreland. Both the Molasse and the Flysch-Helvetic zone are considered as candidates for decoupling horizons due to stress orientation observations and due to their rheological behaviour. From seismological and rheological data, we suggest a horizontal stress decoupling across the Eastern Alps caused by a weakened central Alpine lithosphere. Received: 3 July 1998 / Accepted: 4 April 1999