Sulfur isotope characteristics of the Archean Cu–Zn Gossan Hill VHMS deposit, Western Australia

Gossan Hill is an Archean (∼3.0 Ga) Cu–Zn–magnetite-rich volcanic-hosted massive sulfide (VHMS) deposit in the Yilgarn Craton of Western Australia. Massive sulfide and magnetite occur within a layered succession of tuffaceous, felsic volcaniclastic rocks of the Golden Grove Formation. The Gossan Hill deposit consists of two stratigraphically separate ore zones that are stratabound and interconnected by sulfide veins. Thickly developed massive sulfide and stockwork zones in the north of the deposit are interpreted to represent a feeder zone. The deposit is broadly zoned from a Cu–Fe-rich lower ore zone, upwards through Cu–Zn to Zn–Ag–Au–Pb enrichment in the upper ore zone. New sulfur isotope studies at the Gossan Hill deposit indicate that the variation is wider than previously reported, with sulfide δ³⁴S values varying between −1.6 and 7.8‰ with an average of 2.1 ± 1.4‰ (1σ error). Sulfur isotope values have a broad systematic stratigraphic increase of approximately 1.2‰ from the base to the top of the deposit. This variation in sulfur isotope values is significant in view of typical narrow ranges for Archean VHMS deposits. Copper-rich sulfides in the lower ore zone have a narrower range (δ³⁴S values of −1.6 to 3.4‰, average ∼1.6 ± 0.9‰) than sulfides in the upper ore zone. The lower ore zone is interpreted to have formed from a relatively uniform reduced sulfur source dominated by leached igneous rock sulfur and minor magmatic sulfur. Towards the upper Zn-rich ore zone, an overall increase in δ³⁴S values is accompanied by a wider range of δ³⁴S values, with the greatest variation occurring in massive pyrite at the southern margin of the upper ore zone (−1.0 to 7.8‰). The higher average δ³⁴S values (2.8 ± 2.1‰) and their wider range are explained by mixing of hydrothermal fluids containing leached igneous rock sulfur with Archean seawater (δ³⁴S values of 2 to 3‰) near the paleoseafloor. The widest range of δ³⁴S values at the southern margin of the deposit occurs away from the feeder zone and is attributed to greater seawater mixing away from the central upflow zone. Received: 10 June 1999 / Accepted: 28 December 1999     

Tourmaline in Proterozoic Massive Sulfide Deposits from Rajasthan, India

We have analyzed the chemical composition and boron isotope composition of tourmaline from tourmalinites, granite and a quartz-tourmaline vein from the Deri ore zone and from a pegmatitic band in the Rampura-Agucha ore body. These two Proterozoic massive sulfide deposits occur in the Aravalli-Delhi orogenic belt, Rajasthan, northwest India. Tourmaline from stratiform tourmalinites closely associated with the massive sulfides in the Deri deposit have preserved their original chemical compositions despite regional and thermal metamorphism in the area. These tourmalines have low Fe/(Fe + Mg) ratios (0.19–0.30; mean 0.26) that suggest formation close to the sediment-sea water interface. The δ¹¹B values (−15.5 and −16.4‰) are compatible with boron derived from leaching of argillaceous sediments and/or felsic volcanics underlying the original massive sulfide deposit during its formation. Boron isotope compositions measured in tourmaline from a post-ore granite and quartz-tourmaline vein in the Deri deposit indicate that boron in these tourmalines was derived from the tourmalinites produced during ore formation. The boron isotope systematics of a coarse brown tourmaline crystal from a pegmatitic band on the hanging wall contact of the Rampura-Agucha deposit indicate that 45 ± 25% of the boron within the original tourmaline was lost during upper amphibolite facies regional metamorphism. Received: 3 April 1996 / Accepted: 11 April 1996     

The use of fluorine as a pathfinder for volcanic-hosted massive sulfide ore deposits

A multi-element geochemical study of the wall rocks of intermediate to felsic volcanic-hosted massive sulfide deposits was carried out to identify pathfinder elements which significantly enlarge the size of exploration targets. Drill core samples from the Crandon massive sulfide deposit in Wisconsin, and outcrop samples from the United Verde and Iron King deposits in Arizona, and from the Captains Flat, Mt. Costigan, and Wiseman Creek deposits in New South Wales, Australia were analyzed. Because anomalously high fluorine values have been described in several volcanic-hosted ore systems, fluorine was included in the study.All of the above deposits have patterns of fluorine enrichment around ore. Drill core samples from two noneconomic prospects within ten miles of the Crandon deposit contain background to only weakly anomalous fluorine values.At the large Crandon deposit (> 50 million tons of zinc, copper ore), fluorine enrichment extends approximately 320 m into the footwall rocks and at least 220 m into the hanging wall rocks. At the large United Verde deposit (> 50 million tons of copper, zinc ore), fluorine enrichment is recognizable in the footwall rocks at least 650 m from the ore. At the smaller Iron King deposit (five million tons production of zinc, lead, copper ore), fluorine enrichment extends for a distance of approximately 60 m into the footwall rocks. At the small deposits in New South Wales (< five million tons production of zinc, lead, copper ore), fluorine enrichment is easily recognizable, but with the samples collected, the limits of the anomalous patterns cannot be defined.Fluorine occurs in some hydrothermal systems unassociated with mineralization and is therefore not a specific signature of ore-forming processes. From the work completed, many massive sulfide deposits in volcanic rocks occur in hydrothermal systems which contain fluorine. On the basis of the data presented, if anomalously high fluorine values do exist in an exploration search area, the chances of finding a massive sulfide ore deposit are improved.Genetic models for volcanic-hosted massive sulfide ore deposits have concentrated on rock textures, alteration mineralogy, and geochemistry of the ore metals. From the data presented, fluorine should be considered as a component of massive sulfide systems in intermediate to felsic volcanic rocks, and should be considered as a possible complexing agent for the ore metals.     

Sulfur, lead and helium isotopic compositions of sulfide minerals from the Dachang Sn-polymetallic ore district in South China: implication for ore genesis

Summary The Dachang Sn-polymetallic ore district is one of the largest tin producing districts in China. Its origin has long been in dispute between magmatic-hydrothermal replacement and submarine exhalative-hydrothermal origin. The Dachang ore district comprises several types of ore deposits, including the Lamo magmatogenic skarn deposit near a granite intrusion, the Changpo-Tongkeng bedded and vein-type sulfide deposit, and the Gaofeng massive sulfide deposit. Sulfide minerals from the Lamo skarn ores show δ³⁴S values in the range between −3 and +4‰ with a mean close to zero, suggesting a major magmatic sulfur source that likely was the intrusive Longxianggai granite. Sulfide minerals from the Gaofeng massive ores show higher δ³⁴S values between +5 and +12‰, whereas sulfide minerals from the Changpo-Tongkeng bedded ores display lighter δ³⁴S values between −7 and −0.2‰. The difference in the sulfur isotope ranges in the two deposits can be interpreted by different degrees of inorganic thermochemcial reduction of marine sulfate using a one-step batch separation fractionation model. Sulfur isotopic compositions from the vein-type ores at Changpo-Tongkeng vary widely from −8 to +4‰, but most of the data cluster around −2.9‰, which is close to that of bedded ores (−3.6‰). The sulfur in vein-type ores might be derived from bedded ores or it represents a mixture of magmatic- and sedimentary-derived sulfur. Pb isotopic compositions of sulfide minerals in the Dachang ore district reveal a difference between massive and bedded ores, with the massive ores displaying more radiogenic Pb isotope ratios. Correlations of ²⁰⁶Pb/²⁰⁴Pb and ²⁰⁷Pb/²⁰⁴Pb or ²⁰⁸Pb/²⁰⁴Pb for the massive and bedded ores are interpreted as two-component mixing of Pb leached from sedimentary host rocks and from deep-seated Precambrian basement rocks composed of metamorphosed volcano-sedimentary rocks. Pb isotopic compositions of sulfide minerals from vein-type ores overlap with those of bedded sulfides. Similar to the sulfur, the lead in vein-type ores might be derived from bedded ores. Skarn ores at Lamo show very limited variations in Pb isotopic compositions, which may reflect a major magmatic-hydrothermal lead source. Helium isotope data of fluid inclusions trapped in sulfides indicate that He in the massive and bedded ores has a different origin than He in fluorite of granite-related veins. The ³He/⁴He ratios of 1.2–2.9 Ra of fluid inclusions from sulfides at Gaofeng and Changpo-Tongkeng imply a contribution of mantle-derived fluids. Overall our data support a submarine exhalative-hydrothermal origin for the massive and bedded ore types at Dachang. Supplementary material to this paper is available in electronic form at Appendix available as electronic supplementary material     

新疆阿尔泰山南缘产于泥盆纪火山-沉积盆地铅锌矿床地质特征--以可可塔勒铅锌矿为例

可可塔勒矿床位于新疆阿尔泰造山带南缘,产于泥盆纪火山-沉积盆地内铅锌矿(可可塔勒)体呈似层状、透镜状,矿石构造以条纹条带状、块状、斑杂状为主,矿物成分相对简单,矿体直接容矿围岩为火山-沉积岩.矿床属火山-沉积岩容矿的块状硫化物矿床.为介于典型的火山岩容矿的块状硫化物型矿床(VHMS)和典型沉积岩容矿的硫化物矿床(SEDEX型)之间的过渡类型(一种新类型块状硫化物矿床),其矿化特征与伊比利亚型矿床相类似.     

云南大平掌铜多金属矿床成矿作用

云南大平掌矿床位于澜沧江火山岩带的中南段,左侧是澜沧江和酒房深大断裂。矿区内发育一套形成于岛弧环境的上石炭统细碧-石英角斑岩系,矿体产于流纹质火山岩中,产状与火山岩一致。矿体分2类,上部为块状矿体,下部为细脉-浸染状矿体。矿床内热液蚀变发育,特别是浸染状矿体中更强,并从矿体中心向外侧形成分带。具工业意义的Cu、Pb、Zn等元素以硫化物形式产出。S、Pb、Sr、Nd等同位素成分表明,成矿物质来源于地幔-下地壳。尽管矿体受后期构造破坏强烈,但综合研究表明,该矿床仍具有世界上绝大多数火山成因块状硫化物矿床的共同性。它与区内类似矿床的差异性,为在该区寻找火山成因块状硫化物矿床开辟了新方向。     

新疆阿舍勒铜锌矿床矿石化学组分分带研究及意义

阿舍勒铜锌矿床是近年来发现的大型火山成因块状硫化物矿床之一。由于矿床成矿后遭受构造变质变形作用，使矿体的形态、产状发生了很大变化，所以矿体的分带结构也很难保留该类矿床所具有的理想分带型。因此，研究矿床分带性，对于了解矿床的成矿方式以及确定矿体的分布型式、产出状态、，进而指导找矿预测等方面均具一定意义。     

Genesis of the Permian Baimazhai magmatic Ni–Cu–(PGE) sulfide deposit, Yunnan, SW China

The ~260 Ma-old Baimazhai Ni–Cu–(PGE) sulfide deposit in the Jinping region, Yunnan, SW China, is hosted in a small mafic–ultramafic intrusion, which intruded Ordovician sandstone and slate. The intrusion is concentric with lens shape, about 530 m long, 190 m wide and 24 to 64 m thick, trends 296°, and dips 22°NE. The massive sulfide ore body forms the core of the intrusion and is surrounded by variably mineralized orthopyroxenite, websterite and barren gabbro. The proportion of gabbro, websterite, orthopyroxenite and massive ore is approximately 30, 30, 20 and 20 vol.%, respectively. Magmatic pyrrhotite, pentlandite and chalcopyrite make up more than 90% of the massive ores. The massive ores contain high Ni (1.6 to 4.2 wt%) and Cu (0.4 to 6.5 wt%) and low ∑PGE contents (85 to 524 ppb). They have Pd/Ir ratios ranging from 6.7 to 530, Pd/Pt ratios from 0.7 to 2.6 and Cu/(Pd×1,000) ratios from 31 to 400, which are comparable with those of the silicate rocks [Pd/Ir = 4 to 183, Pd/Pt = 0.7 to 3.5, and Cu/(Pd×1,000) = 100 to 400]. Similar Pd/Pt and Cu/Pd ratios of the silicate rocks and massive ores throughout the intrusion indicate a single sulfide segregation event. Excess sulfide melt segregation resulted from intensive crustal contamination that formed Si-rich and Mg-rich basaltic magmas in a deep-seated staging chamber before magma emplacement. The immiscible sulfide melts and the silicate melts were eventually evacuated from the staging magma chamber by compressive forces. Flow differentiation under high velocity concentrated the sulfide melts toward the middle of the magma flow, and consequently, formed a massive sulfide ore body in the central part of the intrusion. Low concentrations of PGEs and general absence of platinum-group minerals in the massive ores may have resulted from a relatively large mass fraction of the sulfide melts (e.g. R-factor = ~70) in Baimazhai compared with other intrusions elsewhere, such as Noril’sk-Talnakh with a R-factor of >10,000.     

Sequence of mineral formation in clastic ores of the Saf’yanovka volcanic-hosted copper massive sulfide deposit,the Central Urals

The bedded clastic ore widespread on the slopes and flanks of the deeply eroded sulfide mound at the Saf’yanovka volcanic-hosted copper massive sulfide deposit consists of products of destruction of the Paleozoic black smoker along with diverse newly formed sulfides. The size of ore clasts gradually decreases with distance from the massive ore mound, from more than tens of centimeters to a few millimeters. The clastic sediments are characterized by good preservation of sulfide material composed of hydrothermal sedimentary colloform pyrite, chalcopyrite with lamellae of relict isocubanite, and concentrically zoned sphalerite. Numerous pyrite framboids, nodules, and euhedral crystals; chalcopyrite segregations; and twinned sphalerite are typical of sulfide-bearing black shale. Enargite, tennantite, and galena were formed after pyrite, filling interstices between nodules or partially replacing and corroding the previously formed minerals. The interrelations between minerals show that the fine-clastic sulfide-bearing black shale underwent diagenesis in the presence of organic matter.     

滇西大平掌铜多金属矿床火山喷流沉积原因

大平掌矿床由上部层状块状硫化物矿体和下部细脉浸染状矿体组成,双层结构清楚。块状矿体中发育典型的草莓状和鲕状硫化物。成矿地质背景和矿石中的金属元素及REE配分形式、S同位素组成、流体包裹体特征等均与黑矿型矿床及现代海底热液活动区硫化物矿床相似。矿床典型的火山喷流沉积成因。     

Marble-hosted sulfide ores in the Angouran Zn-(Pb–Ag) deposit, NW Iran: interaction of sedimentary brines with a metamorphic core complex

The Angouran Zn-(Pb–Ag) deposit, Zanjan Province, NW Iran, is located within the central Sanandaj-Sirjan Zone of the Zagros orogenic belt. The deposit has proven and estimated resources of 4.7 Mt of sulfide ore at 27.7% Zn, 2.4% Pb, and 110 g/t Ag, and 14.6 Mt of oxidized carbonate ores at 22% Zn and 4.6% Pb. It is hosted by a metamorphic core complex that is unconformably overlain by a Neogene volcanic and evaporite-bearing marine to continental sedimentary sequence. The sulfide orebody, precursor to the significant nonsulfide ores, is located at the crest of an open anticline at the contact between Neoproterozoic to Cambrian footwall micaschists and hanging wall marbles. ⁴⁰Ar–³⁹Ar data on muscovite from mineralized and unaltered footwall micaschists suggest a rapid Mid-Miocene exhumation of the metamorphic basement (∼20 Ma) and yield an upper age constraint for mineralization. The fine-grained sulfide ore is massive, replacive, often brecciated, clearly postmetamorphic and dominated by Fe-poor sphalerite, with minor galena, pyrite, anhydrite, quartz, muscovite, dolomite, and rare calcite. Sphalerite contains Na–Ca–Cl brine inclusions (23–25 mass% total dissolved solids) with homogenization temperatures of 180–70°C. Fluid inclusion chemistry (Na–K–Li–Ca–Mg–Cl–Br), ore geochemistry, S, and Pb isotope data suggest that the Angouran sulfide ore formed by the interaction of modified, strongly evaporated Miocene seawater and the lithotypes of an exhumed metamorphic core complex. Minor contributions of metals from Miocene igneous rocks cannot be excluded. Mineralization occurred in a collisional intra-arc setting with high heat flow, probably during the transition from an extensional to a compressional regime. The Angouran deposit may represent a new type of low-temperature carbonate-hosted Zn–Pb ore that is distinct from Mississippi Valley type and sedimentary-exhalative deposits.Editorial handling: B. Lehmann     

甘肃省金川超大型铜镍硫化物矿床富铂钯矿石成因研究

金川铜镍硫化物矿床的成因及侵位机制尤其是块状矿石和铂钯富集体成因一直存在较大争议,本文通过对金川矿石的空间关系、地球化学特征研究,指出金川矿床遭受构造及热液蚀变作用影响明显,块状矿石相对富集Os、Ir、Ru、Rh,铂钯富集体相对富集Pt、Pd、Au、Cu.研究认为,块状矿石是晚期纯硫化物矿浆上升贯入后经单硫化物固溶体结晶堆积而成,残余熔浆形成初始铂族矿物,后期矿体遭受热液蚀变及构造剪切-热液作用,使Pt、Pd、Cu、Au迸一步富集形成铂钯富集体,并在有利于成矿的空间聚集成矿.块状矿石与铂钯富集体关系密切,据此推测2 #矿体、24#矿体深边部裂隙中具有良好的勘探前景.     

The effects of sulfidation and oxidation during metamorphism on compositionally varied rocks adjacent to the Bleikvassli Zn–Pb–(Cu) deposit, Nordland, Norway

Petrographic, electron microprobe, and bulk-rock geochemical analyses indicate that the distribution and composition of ferromagnesian silicates (biotite, garnet, and staurolite) in and adjacent to the metamorphosed Bleikvassli Zn–Pb–(Cu) volcanogenic massive sulfide deposit, Norway, are dependent upon the competing effects of f O₂–f S₂ and host-rock composition. The enrichment in magnesium content of these silicates within the orebody and at distances of as much as 5–10 m away is due to the increased f O₂ and f S₂ conditions imposed on the silicates in zones subject to minor hydrothermal alteration during regional metamorphism. Alternatively, within pelitic country rocks at distances >5–10 m from ore, the host-rock chemistry controls the composition of metamorphic silicate minerals. Also, country rocks within a few meters of ore are distinguished by the common presence of zinc-bearing staurolite (up to 9 wt% ZnO) coexisting with biotite ± garnet. Rocks in the Bleikvassli deposit were hydrothermally enriched in zinc and fluorine prior to metamorphism. The fluorine resides mainly in biotite, which is an additional contributing factor to the magnesium enrichment of that mineral due to Fe²⁺–F avoidance. Our inference that the sulfidation–oxidation halo around the Bleikvassli ore deposit is only meters in width contrasts with the view of Maiga (1983), who proposed the effects of sulfidation could be identified at distances >159 m from ore. It is evident that the delineation of a sulfidation–oxidation halo bordering a metamorphosed massive sulfide deposit must be done carefully in order to discriminate between the effects due to variations in primary rock composition versus those resulting from a sulfur and oxygen fugacity gradient between the massive sulfides and the sulfur-poor country rocks. Received: 1 March 1998 / Accepted: 3 May 2000     

Geochemistry of the Kalatongke Ni–Cu–(PGE) sulfide deposit,NW China: implications for the formation of magmatic sulfide mineralization in a postcollisional environment

The Kalatongke (also spelt as Karatungk) Ni–Cu–(platinum-group element, PGE) sulfide deposit, containing 33 Mt sulfide ore with a grade of 0.8 wt.% Ni and 1.3 wt.% Cu, is located in the Eastern Junggar terrane, Northern Xinjiang, NW China. The largest sulfide ore body, which occupies more than 50 vol.% of the intrusion Y1, is dominantly comprised of disseminated sulfide with a massive sulfide inner zone. Economic disseminated sulfides also occur at the base of the intrusions Y2 and Y3. The main host rock types are norite in the lower part and diorite in the upper part of each intrusion. Enrichment in large ion lithophile elements and depletion in heavy rare earth elements relative to mid-ocean ridge basalt indicate that the mafic intrusions were produced from magmas derived from a metasomatized garnet lherzolite mantle. The average grades of the disseminated ores are 0.6 wt.% Ni and 1.1 wt.% Cu, whereas those of the massive ores are 2 wt.% Ni and 8 wt.% Cu. The PGE contents of the disseminated ores (14–69 ppb Pt and 78–162 ppb Pd) are lower than those of the massive ores (120–505 ppb Pt and 30–827 ppb Pd). However, on the basis of 100% sulfide, PGE contents of the massive sulfides are lower than those of the disseminated sulfides. Very high Cu/Pd ratios (>4.5 × 10⁴) indicate that the Kalatongke sulfides segregated from PGE-depleted magma produced by prior sulfide saturation and separation. A negative correlation between the Cu/Pd ratio and the Pd content in 100% sulfide indicates that the PGE content of the sulfide is controlled by both the PGE concentrations in the parental silicate magma and the ratio of the amount of silicate to sulfide magma. The negative correlations between Ir and Pd indicate that the massive sulfides experienced fractionation.     

河南洛宁县铁炉坪银铅矿床地质特征及找矿标志

通过对铁炉坪银铅矿床地层、构造、岩浆岩及围岩蚀变等地质特征研究,认为矿体受花岗绿岩带及构造断裂带的联合控制,并受后期热液叠加改造,属海底火山喷发-变质热液改造块状硫化物型矿床,归纳总结其找矿标志,对熊耳山地区寻找同类型矿床具重要指导意义。     

Sulfur and lead isotope geochemistry of hypogene mineralization at the Barite Hill Gold Deposit, Carolina Slate Belt, southeastern United States: a window into and through regional metamorphism

The Barite Hill gold deposit, at the southwestern end of the Carolina slate belt in the southeastern United States, is one of four gold deposits in the region that have a combined yield of 110 metric tons of gold over the past 10 years. At Barite Hill, production has dominantly come from oxidized ores. Sulfur isotope data from hypogene portions of the Barite Hill gold deposit vary systematically with pyrite–barite associations and provide insights into both the pre-metamorphic Late Proterozoic hydrothermal and the Paleozoic regional metamorphic histories of the deposit. The δ³⁴S values of massive barite cluster tightly between 25.0 and 28.0‰, which closely match the published values for Late Proterozoic seawater and thus support a seafloor hydrothermal origin. The δ³⁴S values of massive sulfide range from 1.0 to 5.3‰ and fall within the range of values observed for modern and ancient seafloor hydrothermal sulfide deposits. In contrast, δ³⁴S values for finer-grained, intergrown pyrite (5.1–6.8‰) and barite (21.0–23.9‰) are higher and lower than their massive counterparts, respectively. Calculated sulfur isotope temperatures for the latter barite–pyrite pairs (Δ=15.9–17.1‰) range from 332–355 °C and probably reflect post-depositional equilibration at greenschist-facies regional metamorphic conditions. Thus, pyrite and barite occurring separately from one another provide pre-metamorphic information about the hydrothermal origin of the deposit, whereas pyrite and barite occurring together equilibrated to record the metamorphic conditions. Preliminary fluid inclusion data from sphalerite are consistent with a modified seawater source for the mineralizing fluids, but data from quartz and barite may reflect later metamorphic and (or) more recent meteoric water input. Lead isotope values from pyrites range for ²⁰⁶Pb/²⁰⁴Pb from 18.005–18.294, for ²⁰⁷Pb/²⁰⁴Pb from 15.567–15.645, and for ²⁰⁸Pb/²⁰⁴Pb from 37.555–38.015. The data indicate derivation of the ore leads from the country rocks, which themselves show evidence for contributions from relatively unradiogenic, mantle-like lead, and more evolved or crustal lead. Geological relationships, and stable and radiogenic isotopic data, suggest that the Barite Hill gold deposit formed on the Late Proterozoic seafloor through exhalative hydrothermal processes similar to those that were responsible for the massive sulfide deposits of the Kuroko district, Japan. On the basis of similarities with other gold-rich massive sulfide deposits and modern seafloor hydrothermal systems, the gold at Barite Hill was probably introduced as an integral part of the formation of the massive sulfide deposit. Received: 17 August 1998 / Accepted: 12 October 2000     

喀拉通克铜镍矿床铂族元素地球化学特征及其成矿作用意义

喀拉通克铜镍矿床位于准噶尔板块北缘,矿区主要矿体赋存于Y1-Y3号岩体中。矿石构造类型为致密块状和浸染状两大类,其中前者与后者呈贯入接触,不同浸染状类型之间为过渡关系。岩石和矿石的PGE总量偏低,且以PPGE为主,IPGE含量较低。整体上岩石中的PGE含量显示随基性程度降低而变小。矿石中的PGE含量随硫化物含量增加增大,显示PGE主要分布于硫化物熔离形成的物相中。100%硫化物计算后,矿石PGE含量平均仅为573×10^-9。各岩体中浸染状矿石PGE组成并无明显差异;岩石和矿石具有相似的PGE分配模式,均属于Pt-Pd配分型。岩石Ni/Cu-Pd/Ir关系以及岩石地球化学资料显示,形成喀拉通克岩体的初始岩浆为MgO含量较高的玄武质岩浆,属于PGE不亏损的岩浆。基于PGE不亏损的大陆拉斑玄武岩初始岩浆推算,喀拉通克矿床母岩浆明显亏损PGE,而深部硫化物熔离可能是导致母岩浆PGE亏损的主要原因。岩石和矿石Pd/Pt比值总体特征,岩石Cr与Ni、Ir、Ru和Rh相关性,以及硫同位素和岩石学资料分析表明,初始岩浆在地壳深部发生的橄榄石、铬铁矿等矿物的分离结晶作用,可能是促使硫过饱和与深部熔离的主要因素。IPGE与PPGE分异特征及其相关分析,结合矿床宏观地质特征,推断该矿床浸染状矿的成矿作用经历了初始岩浆（PGE不亏损）→橄榄石等矿物分离结晶→硫化物深部熔离→成矿母岩浆（PGE亏损）→上侵并结晶分异的成矿过程。块状矿则可能是这一过程中PGE亏损的成矿母岩浆相对滞后熔离形成的硫化物熔体贯入的结果。     

云南大平掌铜多金属矿床稀土元素地球化学特征

滇西大平掌铜多金属矿床具典型的“双层结构”。对上部盆地相的块状硫化物和下部通道相的细脉浸染状硫化物的稀土元素分析表明,前者具正Eu异常的球粒陨石标准化配分模式,后者具负Eu异常的配分模式。这种变化与成矿流体演化有关。通过与大西洋中脊TAG热液活动区表层沉积硫化物和黑烟囱流体等的稀土元素配分模式对比,可以认为成矿是火山喷流沉积作用的结果。     

博茨瓦纳塞莱比-皮奎镍铜矿地质特征及成因

塞莱比-皮奎镍铜矿床是博茨瓦纳最大的镍铜矿床,位于博茨瓦纳东部。在收集整理、系统总结区域成矿地质背景、镍铜矿床的地质特征的基础上,探讨了矿床的成因。认为在岩浆演化的早期,当岩浆中的硫达到饱和,便结晶形成富镍的块状硫化物,而在岩浆演化的后期,结晶出富铜的浸染状硫化物。在重力作用的影响下,这两种硫化物堆积于岩浆房,后来,由于构造作用,含有这两种硫化物的岩浆被挤压出岩浆房,侵入塞莱比-皮奎序列地层,形成了塞莱比-皮奎矿床。最后,文章认为该矿床属于与基性超基性岩有关的构造变质改造的岩浆Ni-Cu硫化物矿床。