THE USE OF TWO-ELECTRODE AND SCHLUMBERGER FILTERS FOR COMPUTING RESISTIVITY AND EM SOUNDING CURVES*

Different sets of filter coefficients for the linear filter technique for the computations of resistivity and EM sounding curves are evaluated for several electrode and coil configurations. Instead of this procedure, the two-electrode filter can be used for computations of Wenner, Schlumberger, and dipole—dipole apparent resistivity model curves by defining convolutional expressions which contain the new input functions in terms of the resistivity transform function. Similarly, the Schlumberger filter performs the computations of dipole—dipole apparent resistivity model curves. The Wenner, Schlumberger, and dipole—dipole filter functions are defined in terms of the two-electrode filter using the new convolutional expressions. A relationship between the Schlumberger and dipole—dipole filter functions is given. The above arguments are adopted for the computations of EM sounding curves. It is shown that the EM filter for the horizontal coplanar loop system (which is identical to the two-electrode filter) performs the computations of the mutual coupling ratios for perpendicular, vertical coplanar, and vertical coaxial loop systems. In the same way, the Schlumberger filter can be used to compute vertical coaxial sounding curves. The corresponding input functions are defined in terms of the EM kernel for all convolutional expressions presented. After these considerations, integral expressions of the mutual coupling ratios involving zero-order Bessel function are derived. The mutual coupling ratio for the vertical coaxial loop system is given in the same form as the mutual coupling ratio for the vertical coplanar loop system.     

Pole-dipole resistivity sounding technique for shallow investigations in hard rock areas

Theory of the pole-dipole resistivity sounding technique and its application in the hard rock areas for shallow groundwater exploration is presented in this paper. The different components of electric field produced by the point source of current, situated over the ground surface, are measured by a dipole placed at a large distance from the source. The theory of the method is rather simple, suggesting two configurations, namely radial pole-dipole and axial pole-dipole. Theoretical expressions derived for the apparent resistivity over layered Earth are directly related to the Schlumberger apparent resistivity, whereas expressions for geometrical factor for pole-dipole and Schlumberger configuration are different. The proposed technique has been tested in actual field conditions having different rock types. A few examples are presented along with Schlumberger sounding curves which confirm the applicability of the proposed sounding technique.     

ON THE PROPERTIES OF THE RECIPROCAL GEOELECTRIC SECTION*

The interpretation of vertical electrical sounding data can be facilitated by the application of the reciprocal geoelectric section. If an apparent resistivity field curve has a descending right end, the apparent resistivity curve of the reciprocal geoelectric section can be obtained by the application of linear filter theory; from this the total transverse resistance of the geoelectric section can be calculated without having to interpret the field curve. In addition, Orellana's auxiliary point method can now be extended to interpret three and four layer apparent resistivity curves of all types. This paper summarizes the properties of the resistivity transform curve, the apparent resistivity curve, and the apparent resistivity curve of the reciprocal geoelectric section, with several new applications.     

RESISTIVITY SOUNDING ON A LAYERED TRANSITIONAL EARTH*

Master curves are presented for three-layer earth-sections, the electrical resistivity in the intermediate layer of which has a linear variation with depth. A new approach is proposed to interpret the sounding data with the help of RMS difference in apparent resistivity values.     

水平多层大地上垂直磁偶极频率测深的全波视电阻率

本文根据视电阻率定义的原则,以及用不同的场量定义的视电阻率效果不同这一事实,提出一种新的全波视电阻率定义.在全区同时用均匀大地上电磁场的三个分量来分区定义祝电阻率.在远区视电阻率由磁场的水平分量求出,在近区由磁场的垂直分量或其实分量定义,而在过渡区则由电场的水平分量确定.用这种方法定义的视电阻率为电磁响应的单值函数,它随频率变化的曲线显著改善,能直观地反映地层电阻率随深度的变化,数值比较接近地层的真电阻率值,假极值效应明显压低.在计算中用切比雪夫多项式分段拟合均匀大地电磁响应的反函数,并给出一套系数,由此算出的视电阻率误差小于1％.     

Effect of coupling noise on the interpretation of results of electromagnetic horizontal sounding and modeling

The time variation of a source of alternating current produces an electromagnetic coupling between the transmitting and receiving systems in induced electrical polarization and resistivity surveys that employ horizontal electrical sounding. The coupling alters, sometimes significantly, the resistivity and chargeability values and, consequently, compromises the interpretation of the data. This work develops the analysis of this coupling on the time domain for both a homogeneous Earth and an Earth constituted of several homogeneous horizontal layers. Based on the results, it evaluates the theoretical variation of the voltage and compares it to observed data of an induced electrical polarization and resistivity survey with horizontal electrical sounding. The comparative study of the voltage decay curves assesses the contribution of the electromagnetic coupling to the values of the chargeability and apparent resistivity as a function of the bipole length and the period of the source current. Besides that, the respective pseudosections have delineated the horizontal and vertical variations of those two electrical properties, providing the interpretation of the geoelectrical section. This research is important for the oil industry because it may furnish information that help to: (i) define the structure of the sedimentary strata; (ii) estimate the clay content of the sandstones; and (iii) detect the possible presence of metallic sulphide halos at fractured zones of the sediments above the oil reservoir. It may be adapted to analysis of EM coupling in both resistive and induced electric well logs.     

电阻率随位置线性变化时的三维大地电磁模拟

采用积分方程法实现了对三维体电磁散射的数值模拟研究.在分析电张量格林函数的基础上,针对大地电磁情形，进行了数值模拟研究.分析了异常体的横向走向长度对电磁响应的影响,特别对电阻率作线性变化的异常体进行了数值分析,并得到了相应测深曲线.对三维电磁测深进行了分析,考察了地层参数的影响,得到了一些重要结果.     

层状方位各向异性介质的视电阻率计算

从电性各向异性的欧姆定律出发，推导了直流电法层状方位各向异性介质中的电位分布、边界条件及视电阻率计算公式．以四极对称装置系统为例，对具有相同各向异性系数的4层模型采用核函数递推法作了理论数值模拟，得到了不同方向的电阻率测深曲线及其等值线形态．结果表明理论公式是正确的，测深曲线既反映了分层介质的电阻率差异，又反映了各层中电阻率的各向异性特征．      

Apparent resistivity of azimuthal anisotropy layered media

Introduction The method of apparent resistivity with direct current (DC) measurement, adopted from geophysical exploration, is one of the most important precursory approaches in earthquake prediction, in which the geo-electric constitutive model is illustrated by the scalar theory Archies law and correspondingly a set of calculation methods for apparent resistivity of layered media has been established (QIAN, et al, 1985; YAO, 1989). But this is not consistent with the fact that in earthqu…     

RESISTIVITY TYPE CURVES OVER OUTCROPPING VERTICAL DYKE—I *

The theoretical horizontal resistivity profiles over an outcropping vertical dyke for various parameters-electrode spacing, vein-width and resistivity contrast—with inline alpha, beta and gamma-Wenner electrode systems are described. The resistivity profiles present a most bewildering variety of shapes as compared to those in resistivity soundings. The analysis of type curves suggests suitable electrode configuration for detection of wide, moderately wide, and thin veins. The negative apparent resistivity values on the gamma anomalies for resistive vein over certain vein-widths of higher positive values of resistivity reflection factor contradict the concept of apparent resistivity hitherto held.     

EQUIVALENCE IN ELECTROMAGNETIC (FREQUENCY) SOUNDING*

An analysis of the equivalence phenomenon, analogous to that encountered in resistivity sounding, has been made for electromagnetic (frequency) sounding with the following systems: horizontal coplanar coils, perpendicular coils, vertical coplanar coils, and vertical coaxial coils. Cases analyzed are three-layer H and K type resistivity distributions. The theoretical responses for the EM sounding systems have been computed by the digital linear filter method using short filters. An analysis has been made of the resolution by the four EM systems considered f the equivalence effect. It is concluded that from the equivalence point of view electromagnetic (frequency) sounding has relatively better resolution compared to resistivity sounding for the H type three-layer cases. For the K type three-layer cases electromagnetic (frequency) sounding provides a serious problem in resolution similar to that encountered in resistivity sounding. Empirical relationships have been established for the H and K type cases respectively in order to numerically quantify the equivalence involved in electromagnetic (frequency) sounding.     

Definitions of apparent resistivity for the presentation of magnetotelluric sounding data1

A new definition of apparent resistivity for the presentation of magnetotelluric sounding data is proposed. The new definition is based on the frequency-normalized impedance function. Both the existing and proposed definitions of apparent resistivity are analysed theoretically and are compared using model curves computed for a 1D earth model. Apparent resistivity curves computed using the proposed definition are a better approximation to the true resistivity values of the subsurface layers. In addition, the layers are more noticeable on the apparent resistivity curves, which is an advantage, especially for the ascending and descending type of apparent resistivity curve.     

THE INTERPRETATION OF INDUCED-POLARIZATION SOUNDING CURVES IN THE FREQUENCY DOMAIN *

Two-layer type curves of apparent frequency effect for the Wenner configuration are presented. The formulation is based on the normal definition of frequency effect in terms of resistivities measured at different frequencies plus the definition of apparent resistivity over two horizontal layers as a function of first and second layer resistivities. The use of these type curves in the interpretation of multilayer apparent frequency-effect curves is described and some field examples are given.     

Combined straightforward inversion of resistivity and induced polarization (time-domain) sounding data

It is proposed that the Straightforward Inversion Scheme (SIS) developed by the authors for 1D inversion of resistivity sounding and magneto-telluric sounding data can also be used in similar fashion for time-domain induced polarization sounding data. The necessary formulations based on dynamic dipole theory are presented. It is shown that by using induced polarization potential, measured at the instant when steady state current is switched off, an equation can be developed for apparent ‘chargeability–resistivity’ which is similar to the one for apparent resistivity. The two data sets of apparent resistivity and apparent chargeability–resistivity can be inverted in a combined manner, using SIS for a common uniform thickness layer earth model to estimate the respective subsurface distributions of resistivity and chargeability–resistivity. The quotient of the two profiles will give the sought after chargeability profile. A brief outline of SIS is provided for completeness. Three theoretical models are included to confirm the efficacy of SIS software by inverting only the synthetic resistivity sounding data. Then one synthetic data set based on a geological model and three field data sets (combination of resistivity and IP soundings) from diverse geological and geographical regions are included as validation of the proposal. It is hoped that the proposed scheme would complement the resistivity interpretation with special reference to shaly sand formations.     

DIGITAL LINEAR FILTER FOR COMPUTING TYPE CURVES FOR THE TWO-ELECTRODE SYSTEM OF RESISTIVITY SOUNDING*

In this paper a technique for computing type curves for the two-electrode resistivity soundings is presented. It is shown that the apparent resistivity due to the system can be represented by a convolution integral. Thus, it is possible to apply the principle of digital linear filtering and compute the desired type-curves. The filter function required for the purpose is found to be identical with that used to compute the EM sounding curves for the two coplanar horizontal loop system. It is further shown that from the two-electrode apparent-resistivity expression one can easily derive the apparent resistivities for other configurations. A comparison of depths of investigation for various systems reveals that the two-electrode system has greater depth of investigation than other conventional systems. This is also supported by the field example presented in the end, which illustrates the relative performance of the two-electrode system vis-a-vis the Wenner system.     

A NUMERICAL METHOD TO COMPUTE THE RESISTIVITY TRANSFORM FROM WENNER SOUNDING DATA*

A numerical technique to compute the resistivity transform directly from the observed Wenner sounding data has been developed. In principle, the procedure is based on a decomposition method and consists of two steps: the first step determines a function that approximates the apparent resistivity data and the second step transforms this function into the corresponding kernel by an analytical operation. The proposed method is tested on some theoretical master curves. A high degree of precision is achieved with very little computer time. The applicability is shown on two field examples.     

RESISTIVITY MEASUREMENTS IN VALLEYS WITH ELLIPTIC CROSS-SECTION*

In this paper an idealized valley of a semi-elliptic cross-section is considered. For a Schlumberger configuration on the axis, sets of master curves are calculated for the ratio of semi-axis a/b= 1, 2, 3, 4, 5 in corresponding to various resistivity ratios of surrounding rocks and valley sediments. For small resistivity ratios, these model curves have the shape of three-layer curves for horizontal bedding and are often equivalent to them within the accuracy of measurements. The axial ratio a/b considerably affects the depth determination of valley sediments. In the special case of a circular cross-section (a/b= 1) the influence of the position of the electrodes on the sounding curve is studied in more detail. The application of the master curves in practice shows that the influence of the specific shape of the valley on soundings should not be neglected. In general, the valleys have a greater “true” depth than can be seen from the interpretation of a sounding by master curves corresponding to the horizontal bedding.     

STUDYING THE INTERCONNECTION OF GROUND AND SURFACE WATERS IN REPRESENTATIVE BASINS UNDER THE PROGRAMME OF THE INTERNATIONAL HYDROLOGICAL DECADE

Abstract

Four geoelectrical soundings were measured with a combination of Schlumberger and azimuthal or equatorial dipole electrode arrays on a Carboniferous limestone basin of the Condroz area, Belgium. The measuring technique is briefly outlined as well as the interpretation procedure, which follows a closed-loop scheme with control of calculated model curves. Some general problems of interpretation of geoelectrical sounding curves are tackled, as far as they have a practical bearing on the treatment of Condroz soundings.

The problem of determining the very high resistivity of limestone is approached through ARCHIE's formula, an empirical relation between the bulk rock resistivity, the porosity and the electrolyte resistivity. An evaluation of the latter two parameters, combined with electrical horizontal conductance measurements directly made on resistivity sounding curves, offers a possibility for fast determination of the total water storage in a limestone aquifer. Such storage determinations could be applied whenever an aquifer shows up as a conductive layer interbedded between two highly resistant layers (e.g. nonsaturated limestone and compact, non-fractured limestone).     

FAST AUTOMATIC PROCESSING OF RESISTIVITY SOUNDINGS*

The difficulty to use master curves as well as classical techniques for the determination of layer distribution (e_i, ρ_i) from a resistivity sounding arises when the presumed number of layers exceeds five or six. The principle of the method proposed here is based on the identification of the resistivity transform. This principle was recently underlined by many authors. The resistivity transform can be easily derived from the experimental data by the application of Ghosh's linear filter, and another method for deriving the filter coefficientes is suggested. For a given theoretical resistivity transform corresponding to a given distribution of layers (thicknesses and resistivities) various criteria that measure the difference between this theoretical resistivity transform and an experimental one derived by the application of Ghosh's filter are given. A discussion of these criteria from a physical as well as a mathematical point of view follows. The proposed method is then exposed; it is based on a gradient method. The type of gradient method used is defined and justified physically as well as with numerical examples of identified master curves. The practical use for the method and experimental confrontation of identified field curves with drill holes are given. The cost as well as memory occupation and time of execution of the program on CDC 7600 computer is estimated.     

THEORY FOR THE BIPOLE-DIPOLE METHOD OF RESISTIVITY SOUNDING*

A theory for the bipole-dipole method of resistivity sounding is developed. Bipole-dipole apparent resistivities are related to Schlumberger apparent resistivities at two spacings. The theory can also be used to compute exact dipole-dipole apparent resistivity curves providing an improvement over the existing techniques which involve far field approximations. A comparison of bipole-dipole and dipole-dipole systems reveals the similarity between the two. However, the resolution of the bipole-dipole system depends on the azimuth angle. The flexibility of the theoretical expressions lead to a generalized field scheme independent of the bipolar or dipolar nature of the current source.