共查询到20条相似文献,搜索用时 46 毫秒
1.
考虑结构面抗剪强度震动退化效应对分析与评价岩质边坡动力稳定性具有重要意义。基于岩石动力试验获取了多因素影响的结构面强度震动退化系数方程,结合极限平衡理论和动态矢量法原理,以UDEC程序作为计算引擎,采用其内置Fish语言编程实时刷新结构面强度特性参数和捕获任意地震历时时刻边坡地震惯性力,并以最小平均安全系数法求解边坡最终动力稳定性评价指标值,从而提出了一种考虑结构面强度震动退化的边坡动力稳定性系数动态算法。研究表明:结构面强度震动退化系数是取决于岩块间循环剪切次数、循环剪切幅度及相对运动速度响应值的动态变量;将该算法应用于含贯通型平直状结构面边坡动力稳定性算例中,其分析结果表明,动力作用时程内考虑结构面强度震动退化的边坡动力稳定性系数较未考虑该效应时的系数衰减更为明显,即前者计算结果更符合一般性自然规律,亦即验证了该算法的可行性;结构面最小强度震动退化系数随动力激励时程变化近似呈负指数函数形式逐渐衰减,且当结构面初始黏聚力(内摩擦角)越大、而坡角(层面倾角)或动荷载幅值(频率)越小时,地震历时过程中边坡最小动力稳定性系数越大,此时边坡最终动力稳定性相对越强。 相似文献
2.
Reported for the first time in this paper are the results of simulating experiments on the γ-irradiation-induced oxidation of Fe^2 under the physicochemical conditions(T=200℃,P=50MPa,Eh=-0.1V,pH=7.2)simial to those under which moderate-low temperature hydrothermal uranium deposits are formed.Evdence shows that the effect of groundwater radiolysis seems to be the major mechanism of wall-rock alteration(hematitizaton)of hydrothermal uranium deposits.Moreover,adiscussion was made of possible effects of radiolysis of the water-rock system on wall-rock alterations including argillization and decoloration of uranium ore deposits on the basis of the experimental results. 相似文献
3.
The development of the Enhanced Geothermal System (EGS) at Soultz-sous-Forêts (France) has given to scientists an interesting opportunity for the application of geochemical modelling of water–rock interactions, combining theoretical studies with field and experimental data. The main results of four successive and complementary studies are summarized: geochemical modelling of fluid–rock interactions with prediction of dissolution/precipitation of minerals, feed-back effects on the mineralogy and petrography of the rock (major role of silicates in the geological past and of carbonates in the near future of the exploitation), experimental control of the dynamics of silicates under thermal gradient and relation between the evolution of the petrophysics of the rocks and the heat and mass transfers. The thermal cycle of the fluid, between 200 °C and 65 °C in the geothermal loop, may be responsible for dissolution/precipitation of minerals which modify the porosity and permeability of the granite, as it happened in the geological past, in relation with hydrothermal circulations in the Rhine Graben. 相似文献
5.
The Ballachulish igneous complex in the Scottish Highlands, part of a widespread group of late Caledonian calcalkaline intrusions,
was emplaced at a depth of 10 km into Dalradian metasediments resulting in melting of the country rocks near the intrusive
contact. The greatest extent of melting occurred in the Leven schist in the 400 m wide so-called Chaotic Zone which experienced
infiltration of aqueous fluids from the pluton. In contrast, adjacent to the Chaotic Zone, the feldspar-bearing Appin quartzite
underwent significant melting only within a few metres of the intrusion, despite both being in contact with the same fluid
source as the Leven schist and having a similar (wet) melting point. The permeability of the Appin quartzite and quartz horizons
in the Leven schist to pervasive grain-edge infiltration of aqueous fluids was determined by measuring the equilibrium quartz-H 2O dihedral angle for the P- T conditions of contact metamorphism. Addition of powdered samples of both rock types to the pure quartz-H 2O system results in a linear decrease of the quartz-H 2O dihedral angle with increasing temperature. The rate of this decrease for the Leven schist is greater than that for the
Appin quartzite, and the angle decreases below 60° some 30 °C below the wet solidus (670 °C at 0.3 GPa). Charges bearing Appin
quartzite had dihedral angles greater than 60° at all temperatures below the wet solidus (690 °C at 0.3 GPa). These results
demonstrate that quartz-rich horizons in the Leven schist would have been permeable to infiltration of aqueous fluids close
to the solidus, permitting extensive H 2O-fluxed melting to occur. The Appin quartzite would have remained impermeable to grain-edge flow, consistent with the observed
differences in the extent of partial melting of the two lithologies.
Received: 25 November 1996 / Accepted: 29 October 1997 相似文献
6.
The site of the underground facility, the Äspö Hard Rock Laboratory, was excavated at a depth of 450 m below the island of Äspö and has been extensively investigated by geological, hydrogeological and hydrochemical methods as part of the geoscientific research for disposal of nuclear waste in Sweden. The geological history of the area dates back to 1.85 Ga and is dominated by granitoids belonging to the Trans-Scandinavian Igneous Belt but also includes basic sheets and xenoliths and dikes of fine-grained granite. Seven tectonic episodes, giving rise to fracture mineralization, are recognised. The major discontinuities and fracture zones were characterised from surface investigations before the tunnel construction work started. These structural features were also identified in the tunnel and are, as predicted, the major water conducting features. Sets of open fractures in the NNW–NW and N–S directions and the brittle fine-grained granite are other important water conductors. Groundwater flow modelling shows that the location of Äspö island has a major impact on the current distribution of groundwater salinity due to varying hydraulic/boundary/conditions in the late and post glacial period. 相似文献
7.
Weathering mechanism of phosphorite rock by Aspergillus niger has been studied. Ten strains of phosphate-solubilizing fungi were isolated from rhizosphere soils by using dilute plate method in solid inorganic phosphorus culture. According to the size of soluble phosphate circle in the medium, a strain of stronger phosphate-solubilizing fungus was acquired, which was identified as, Aspergillus niger using identification methods of morphology and ITS sequences comparison in Genbank. In liquid culture, incubation in static state, the weathering of apatite rock with the fungus by contrast method: putting apatite powder (200 mesh) in liquid culture medium of flask, inoculation fungus after autoclave (setting sterile control) for studying direct weathering process; putting dialysis bag with apatite powder (200 mesh) in liquid culture medium of flask, inoculation fungus after autoclave (setting sterile control) for studying indirect weathering process. 相似文献
8.
In this study, the dynamic behavior of rock clusters falling on rough slopes and impacting a vertical barrier is investigated experimentally and numerically using discrete element analysis. A specially designed laboratory setup that involves a flume of adjustable slope lined with a bumpy surface and equipped with an instrumented wall at the toe is used in the experimental investigation. The velocity profiles and impact forces were measured for three inclination angles using two different rock clusters. Three-dimensional discrete element analysis is then conducted to investigate the mechanical behavior of the rockfall and examine the role of sphericity of the rock cluster on the overall behavior of the system. This was achieved by explicitly simulating the complex shapes of the used rocks and the rough surface of the slope. The material coefficient of friction was measured using heap tests, and the results are compared with those obtained numerically using four different particle sphericities. Conclusions are made regarding the effect of slope inclination angle and the volume of the cluster on the impact forces exerted on rigid barriers. This study suggests that rock sphericity plays important roles on the dynamic behavior of the system and should be taken into consideration in simulating rockfall problems. 相似文献
9.
A series of benched excavations were typically carried out on the bedrock slope surface to improve the stability of the soil–rock mixture (S–RM) fill slope. It is difficult to devise an in situ, large-scale direct shear test for the interphase between the S–RM fill and the benched bedrock slope surface. This study introduced a comprehensive approach to investigate the shear deformation and strength of the interphase. First the soil–rock distribution characteristics were analyzed by test pitting, image analysis, and sieve test. Then the PFC2D random structure models with different rock block size distributions were built, and large-scale numerical shear tests for the interphase were performed after calibrating model parameters through laboratory tests. The stress evolution, damage evolution and failure, deformation localization (based on a principle proposed in this paper), rotation of rock blocks, and shear strength were systematically investigated. It was found that as the rock block proportion and rock block size (rock block proportion of 50 %) increase, the fluctuations of the post-peak shear stress–displacement curves of the interphase become more obvious, and the shear band/localized failure path network becomes wider. Generally, smaller rock blocks are of greater rotation angles in the shear band. The peak shear stress and internal friction angle of the interphase increase, while the cohesion decreases with growth of the rock block proportion. However, all these three parameters increase as the rock block size (rock block proportion of 50 %) increases. 相似文献
10.
A numerical model is proposed for the simulation of rock blasting. A bonded particle system is utilized to mimic the behavior of rock. The particles interact at the contact points through normal and shear springs to simulate rock elasticity. To withstand the deviatoric stresses, the particles are glued to each other. If the applied force exceeds the contact strength, local failure occurs and microcracks are developed in the synthetic rock. For simulation of gas flow, the smooth particle hydrodynamic method is implemented. The interaction of gas particles with the rock grains is assumed to follow a perfect plastic collision model in which the initial momentum of the colliding particles is preserved. A detailed examination of the interaction of gas with blast hole is investigated. It is shown that the proposed hybrid model is capable of simulating the induced shock waves in the gas together with wave propagation in the rock material. The model successfully mimics crack propagation in rock. In particular, the crushed zone around the borehole, radial cracks, and surface spalling are all captured successfully. The results of numerical analysis suggest that gas–rock interaction can, in fact, generate a few successive compressive waves in the rock specimen, causing further extension of radial cracks with time as the weaker secondary and tertiary waves interact with the crack tips. 相似文献
13.
Because of spatial variability and complex compositions, the mechanical test results of natural soil–rock mixtures (SRMs) are often discrete and lack reproducibility, which has greatly restricted the practical application of the experimental findings. The objective of this study was to examine the general mechanical behavior of SRMs under the influences of some hidden factors (e.g., structural parameters, parent rock type and weathering degree). To that end, the abstraction idea was adopted to prepare purified SRM samples. Large-scale triaxial tests were performed on these purified materials. On this basis, the influences of three structural parameters on the mechanical behavior of SRMs were studied. Moreover, the relationship between the shear strength and parent rock type and that between the shear strength and the spatial distribution of rock blocks were quantified. Some additional intrinsic behavior was distinguished from individual experimental phenomena through the comparative analysis of the test data in this study and those reported in the literature. The results show that the hidden factors had significant influences on the mechanical behavior of SRMs. A greater saturated uniaxial compressive strength of rock blocks generally led to a larger shear strength of SRMs. According to the significance of their influences on the shear strength parameters of SRMs, the structural parameters are ordered as: the gradation of rock blocks, the initial dry density of sample and the spatial distribution of rock blocks. The deformation and failure feature of SRMs were considerably affected by the spatial distribution of rock blocks and shear rate. And the shear strength parameters of SRMs were mainly influenced by the content of grains between 40 and 60 mm. The findings of this study would provide useful guidance for engineering practice. 相似文献
14.
The Wenchuan earthquake triggered 15,000 rock avalanches, rockfalls and debris flows, causing a large number of causalities and widespread damage. Similar to many rock avalanches, field investigations showed that tensile failure often occurred at the back edge. Some soil and rock masses were moved so violently that material became airborne. The investigation indicates that this phenomenon was due to the effect of a large vertical seismic motion that occurred in the meizoseismal area during the earthquake. This paper analyses the effect of vertical earthquake force on the failure mechanism of a large rock avalanche using the Donghekou rock avalanche as an example. This deadly avalanche, which killed 780 people, initiated at an altitude of 1,300 m and had a total run-out distance of 2,400 m. The slide mass is mainly composed of Sinian limestone and dolomite limestone, together with Cambrian slate and phyllite. Static and dynamic stability analysis on the Donghekou rock avalanche has been performed using FLAC finite difference method software, under the actual seismic wave conditions as recorded on May 12, 2008. The results show that the combined horizontal and vertical peak acceleration caused a higher reduction in slope stability factor than horizontal peak acceleration alone. In addition, a larger area of tensile failure at the back edge of the avalanche was generated when horizontal and vertical peak acceleration were combined than when only horizontal acceleration was considered. The force of the large vertical component of acceleration was the main reason rock and soil masses became airborne during the earthquake. 相似文献
15.
Being a potential preferential way for water to flow, interfaces between host rock and engineered barriers are critical in the design of deep radioactive waste repositories. In case of cementitious materials, presence of water may lead to long term degradation by leaching. Such a phenomenon could impede the integrity of the confinement by its effect on the hydro-mechanical properties of the interface. Recent experimental results from Buzzi et al. [8] have evidenced some effects of leaching on the hydro-mechanical behavior of rock–concrete interfaces for one leaching time. This paper intends to investigate the influence of leaching on the mechanical behavior of rock–mortar interfaces by means of numerical simulations. These latter will be run for several leaching times to produce a better understanding of the phenomenon. For this purpose, a DEM approach has been developed to simulate the increase of the macro-porosity resulting from the leaching process. The implementation of the approach is first discussed. Then direct shear tests under constant normal stress are performed on a simple interface geometry and on a natural interface geometry. The results after Buzzi et al. [8] are corroborated by this research. 相似文献
16.
Natural Hazards - The evolution law for the mining-induced deformation and failure of surrounding rock is an important parameter for coal mine work safety. Accurate detection is a scientific matter... 相似文献
17.
Zusammenfassung Der Verwitterungsmantel (Laterit s. l.) der südlichen Goldküste besteht aus Horizonten, die sowohl verschiedene Entstehungsart als verschiedenes Alter haben. Brekzien oder Steinschichten sind unter aridem Klima als Wüstenpflaster entstanden. Zonen chemisch verwitterten Felses, Horizonte von lehmigem Sand (an deren Aufbau Termiten wesentlich beteiligt sind) und Konkretionen haben sich unter feuchtem Klima gebildet. Harte limonitische Oberflächen-Krusten deuten auf progressive Austrocknung hin. Unter diesen drei klimatischen Bedingungen gebildete Horizonte wiederholen sich mehrfach im Verwitterungsmantel der Goldküste. Ein junger, unvollständiger Zyklus ist weit verbreitet, ein älterer Zyklus tritt nur in begrenzten Vorkommen auf, und ein dritter Zyklus ist fast nur noch in aufgearbeiteten, limonitisierten Bruchstücken erhalten. Die wiederholten Klimaschwankungen machen es wahrscheinlich, daß der Verwitterungsmantel zeitlich dem größeren Teil des Quartärs entspricht. Wahrscheinlich können die Ergebnisse auf weit größere Gebiete angewandt werden. 相似文献
18.
Acta Geotechnica - To investigate the influence of a rapid water drawdown (RWD) on the seismic response characteristics of reservoir rock slopes, numerical dynamic analyses and shaking table tests... 相似文献
19.
The Ilímaussaq intrusion, South Greenland, provides an exceptional test case for investigating the changes of stable Fe isotope fractionation of solidus phases with changes in the Fe 3+/∑Fe ratio of an evolving melt. The intrusion comprises a sequence of four melt batches that were fed from the same parental alkali basaltic magma. Differentiation produced cumulate rocks that range from augite syenite (phase I) over peralkaline granite (phase II) to agpaitic syenites (phases IIIa and IIIb). Fe 3+/∑Fe ratios in amphiboles increase substantially from phase I to phase II and III rocks and mark a major change in the parental magma composition from augite syenites to peralkaline granites and agpaitic syenites. Before this transition, olivine, clinopyroxene, and amphibole in augite syenite, the most primitive rock type in the Ilímaussaq Complex, have a uniform Fe isotope composition that is identical to that of the bulk of igneous crustal rocks and approximated by the average isotopic composition of basalts ( δ56/54Fe IRMM-014 = 0.072 ± 0.046‰). After the transition, amphiboles in the peralkaline granites and agpaitic syenites yield significantly heavier Fe isotope compositions with δ56/54Fe IRMM-014 values ranging from 0.123 to 0.237‰. Contamination of the Ilímaussaq magma by ongoing crustal assimilation as cause for this increase can be excluded on the grounds of Nd isotope data. Large-scale metasomatic overprint with an external fluid can also be dismissed based on amphibole O and Li isotope systematics. Rather, the increase towards heavy Fe isotope compositions most likely reflects the change in chemical compositions of amphiboles (calcic in augite syenite to sodic in the agpaitic syenites) and their Fe 3+/ΣFe ratios that mirror changes in the chemical composition of the melt and its oxygen fugacity. A sensitive adjustment of equilibrium Fe isotope fractionation factors to amphibole ferric/ferrous ratios is also supported by beta-factors calculated from Mössbauer spetroscopy data. Comparison of the measured isotope fractionation between clinopyroxene and amphibole with that predicted from Mössbauer data reveal Fe isotope systematics close to equilibrium in augite syenites but Fe isotopic disequilibrium between these two phases in phase IIIa agpaitic syenites. These results are in agreement with O and Li isotope systematics. While amphiboles in all Ilímaussaq lithologies crystallized at temperatures between 650 and 850 °C, textural evidence reveals later clinopyroxene crystallization at temperatures as low as 300–400 °C. Therefore, isotopic equilibrium at crystallization conditions between these two phases can not be expected, but importantly, subsolidus reequilibration can also be dismissed. 相似文献
20.
扬子北缘~820Ma可能记录了从挤压环境向伸展环境的重要转换,是解决扬子新元古代演化争议的关键时间节点。本研究在扬子北缘大洪山造山带圆潭地区识别出一套基性岩和浊积岩组合。其中基性岩全岩Sm-Nd等时线年龄为845Ma±81Ma(MSWD=1.5),浊积岩碎屑锆石年龄谱包括四个主要峰值年龄(~835Ma、~1597Ma、~2002Ma、~2482Ma)和两个次要峰值年龄(~2680Ma、~2934Ma),综合前人研究成果将浊积岩的形成时代约束在835~820Ma。浊积岩与花山群的形成时代一致,应代表花山群的北向延伸。浊积岩的物源来自扬子北缘桐柏-大别地区,不同于前人对花山群的分析结果,指示花山群可能具有多个物源。以上地层碎屑锆石年龄谱和地层层序特征与弧后盆地相似。本研究基性岩样品具有低的SiO_(2)(45.41%~50.29%)、K 2O(0.03%~1.49%),高的TiO_(2)(1.42%~3.03%),和低的U/Th(0.15~0.29)、Th/Zr(0.003~0.011)和Nb/Y(0.059~0.147)以及正的εNd(t)(+1.18~+1.57),类似N-MORB地球化学特征。基性岩来自于软流圈,经历<3%部分熔融而生成,并在上升过程中受到了一定程度的地壳混染。综合以上分析,本文认为这些基性岩和浊积岩共同构成一套弧后背景环境岩石组合。 相似文献
|