Ichnofabric analysis of the Tithonian shallow marine sediments (Bhadasar Formation) Jaisalmer Basin,India

The shallow marine sedimentary sequence of the Jaisalmer Basin exhibits one of the important and well-developed Tithonian sedimentary outcrops for western India. The ichnology and ichnofabric of the lower part of Bhadasar Formation (i.e., Kolar Dongar Member) belonging to Tithonian age are presented and discussed. The Kolar Dongar Member represents a shallow marine succession that contains 16 ichnotaxa: Ancorichnus ancorichnus, Conichnus conicus, Gyrochorte comosa, cf. Jamesonichnites heinbergi, Imponoglyphus kevadiensis, Laevicyclus mongraensis, Monocraterion tentaculatum, Ophiomorpha nodosa, Palaeophycus tubularis, P. bolbiterminus, Phycodes palmatus, Planolites beverleyensis, Rhizocorallium isp., Rosselia rotatus, R. socialis, and Teichichnus rectus. The ichnofabric analysis divulges five distinct ichnofabrics, each typifying distinct depositional environment within shallow marine conditions. The ichnofabric Ophiomorpha 1 with syn-sedimentary faulting exemplifies high energy conditions typical of lower shoreface environment, whereas the Ophiomorpha 2 ichnofabric typifies upper shoreface environment. The Ancorichnus ichnofabric reflects lower offshore condition of deposition. The high ichnodiversity Ancorichnus–Rosselia ichnofabric is indicative of inner shelf conditions, while low ichno-diversity Teichichnus ichnofabric indicates prevalence of low energy brackish bay environment. Thus, Tithonian Kolar Dongar Member indicates depositional environment ranging from shoreface to offshore to inner shelf and finally to brackish bay environment.     

Facies model of a sedimentary record for a Pantanal-like inland wetland

Despite recent advances in wetland studies, ancient wetland deposits are still not well documented, and their facies characteristics are poorly registered. Sedimentary facies and sequence stratigraphic analysis of the Miocene Yecua Formation (Chaco foreland basin, Central Andes, Bolivia) and their comparison to Pantanal-like modern wetlands provide an insight into their variability, suggesting a facies model for large inland wetlands that developed in a tropical–subtropical climate. Sedimentological features show that clastic, chemical and biological processes in these environments lead to distinguishable lithofacies variations. Six architectural elements are described: (i) muddy sublittoral (FA1); (ii) mixed siliciclastic–carbonate shoreface (FA2); (iii) sand-flat (FA3) and (iv) mud-flat (FA4) deposits; (iv) floodplain (FA5); and (vi) simple channel deposits (FA6). The succession is composed of shallowing-upward parasequences with different facies characteristics caused by climatically-driven changes of the water level over three orders of magnitude and cyclicity. These cyclic changes reflect a climatic control on the sedimentation. A palaeoclimatic interpretation suggests a generally warm, humid climate with marked rainfall regime changes. The aim of this article is to use this dataset to improve the understanding of depositional elements, lithologies and stratigraphy in tropical–subtropical large inland wetlands. The proposed criteria will help in recognizing inland wetland deposits in other sedimentary basins.     

Facies and sequence stratigraphic analysis in an intracratonic, thermal-relaxation basin: the Early Proterozoic, Lower Quilalar Formation and Ballara Quartzite, Mount Isa Inlier, Australia

The Quilalar Formation and correlative Mary Kathleen Group in the Mount Isa Inlier, Australia, conformably overlie rift-related volcanics and sediments and non-conformably overlie basement rocks. They represent a thermal-relaxation phase of sedimentation between 1780 and 1740 Ma. Facies analysis of the lower siliciclastic member of the Quilalar Formation and the coeval Ballara Quartzite permits discrimination of depositional systems that were restricted areally to either N-S-trending marginal platform or central trough palaeogeographic settings. Four depositional systems, each consisting of several facies, are represented in the lower Quilalar Formation-Ballara Quartzite; these are categorized broadly as storm-dominated shelf (SDS), continental (C), tide-dominated shelf (TDS) and wave-dominated shoreline (WDS). SDS facies consist either of black pyritic mudstone intervals up to 10 m thick, or mudstone and sandstone associated in 6–12-m-thick, coarsening-upward parasequences. Black mudstones are interpreted as condensed sections that developed as a result of slow sedimentation in an outer-shelf setting starved of siliciclastic influx. Vertical transition of facies in parasequences reflects flooding followed by shoaling of different shelf subenvironments; the shoreface contains evidence of subaerial exposure. Continental facies consist of fining-upward parasequences of fluvial origin and tabular, 0·4–4-m-thick, aeolian parasequences. TDS facies are represented by stacked, tabular parasequences between 0·5 and 5 m thick. Vertical arrangement of facies in parasequences reflects flooding and establishment of a tidal shelf followed by shoaling to intertidal conditions. WDS facies are preserved in 0·5–3-m-thick, stacked, tabular parasequences. Vertical transition of facies reflects initial flooding with wave reworking of underlying arenites along a ravinement surface, followed by shoaling from lower shoreface to foreshore conditions. Parasequences are stacked in retrogradational and progradational parasequence sets. Retrogradational sets consist of thin SDS parasequences in the trough, and C, TDS and probably WDS parasequences on the platforms. Thick SDS parasequences in the trough, and TDS, subordinate C and probably WDS parasequences on the platforms make up progradational parasequence sets. Depositional systems are associated in systems tracts that make up 40–140-m-thick sequences bounded by type-2 sequence boundaries that are disconformities. Transgressive systems tracts consist of C, TDS and probably WDS depositional systems on the platforms and the SDS depositional system and suspension mudstone deposits in the trough. The transgressive systems tract is characterized by retrogradational parasequence sets and developed in response to accelerating rates of sea-level rise following lowstand. Condensed-section deposits in the trough, and the thickest TDS parasequences on the platforms reflect maximum rates of sea-level rise and define maximum flooding surfaces. Highstand systems tract deposits are progradational. Early highstand systems tracts are represented by TDS and probably WDS depositional systems on the platforms and suspension mudstone deposits in the trough and reflect decreasing rates of sea-level rise. Later highstand systems tracts consist of the progradational SDS depositional system in the trough and, possibly, thin continental facies on the platforms. This stage of sequence development is related to slow rates of sea-level rise, stillstand and slow rates of fall. Lowstand deposits of shelf-margin systems tracts are not recognized but may be represented by shoreface deposits at the top of progradational SDS parasequence sets.     

An example of a highly bioturbated,storm‐influenced shoreface deposit: Upper Jurassic Ula Formation,Norwegian North Sea

Integrated ichnological and sedimentological analyses of core samples from the Upper Jurassic Ula Formation in the Norwegian Central Graben were undertaken to quantify the influence of storm waves on sedimentation. Two main facies associations (offshore and shoreface) that form a progradational coarsening upward succession are recognizable within the cores. The offshore deposits are characterized by massive to finely laminated mudstones and fine‐grained sandstones, within a moderately to highly bioturbated complex. The trace fossil assemblage is dominated by deposit‐feeding structures (for example, Planolites, Phycosiphon and Rosselia) and constitutes an expression of the proximal Zoophycos to distal Cruziana ichnofacies. The absence of grazing behaviours and dominance of deposit‐feeding ichnofossils is a reflection of the increased wave energies present (i.e. storm‐generated currents) within an offshore setting. The shoreface succession is represented by highly bioturbated fine‐grained to medium‐grained sandstones, with intervals of planar and trough cross‐bedding, thin pebble lags and bivalve‐rich shell layers. The ichnofossil assemblage, forming part of the Skolithos ichnofacies, is dominated by higher energy Ophiomorpha nodosa ichnofossils and lower energy Ophiomorpha irregulaire and Siphonichnus ichnofossils. The presence of sporadic wave‐generated sedimentary structures and variability in ichnofossil diversity and abundance attests to the influence of storm‐generated currents during deposition. As a whole, the Ula Formation strongly reflects the influence of storm deposits on sediment deposition; consequently, storm‐influenced shoreface most accurately describes these depositional environments.     

层序地层中的混合沉积作用及其控制因素

简要介绍了硅质碎屑与碳酸盐混合沉积有关概念及混合沉积作用类型,分析了层序体系域中的混合沉积作用及其控制因素。总结认为,硅质碎屑与碳酸盐的混合沉积作用不仅发生在低水位体系域（LST）,而且其它各体系域中也都有不同程度的混合沉积现象,但混合沉积作用方式有差别：LST主要为源区混合,陆棚边缘体系域（SMT）和高水位体系域（HST）晚期以间断混合及相混合占优,海浸体系域（TST）早期以间断混合为主。综合研究显示,准层序一级的海平面变化型式差异可能是导致层序体系域混合沉积作用的主要因素,其中,LST、SMT、晚期HST的混合沉积作用分别与准层序一级海平面变化的幅度、速率、位置和持续时间有关,TST则受控于物源供给;先期地形、气候变化（含碳酸盐生产速率影响）或多或少对体系域的混合沉积作用有影响。此外,某些情况下层序体系域的混合沉积作用可能会受到局部构造活动影响,而层序组或超层序内层序体系域的混合沉积作用强弱及其旋回性变化可以提供脉动性区域构造活动信息。     

Miocene tidal-influenced sedimentation to continental Pliocene sedimentation in the forebulge–backbulge depozones of the Beni–Mamore foreland Basin (northern Bolivia)

Mio-Pliocene deposits of the forebulge–backbulge depozones of the Beni-Mamore foreland Basin indicate tidally to fluvially dominated sedimentation. Seven facies assemblages have been recognized: FAA–FAG. FAA represents a distal bottom lake assemblage, FAB and FAD are interpreted as tidal flat deposits, FAC and FAG are interpreted as fluvial systems, FAE sediments are deposited in a subtidal/shoreface setting, and FAG represents a meandering fluvial system. The identification of stratigraphic surfaces (SU, MFS, and MRS) and the relationship among the facies assemblages permit the characterization of several systems tracts: a falling-stage systems tract (FSST) followed by a lowstand systems tract (LST), a transgressive systems tract (TST), and a highstand systems tract (HST). The FSST and LST may have been controlled by the uplift of the Beni-Mamore forebulge, whereas TST may result from a quiescent stage in the forebulge. Subaerial unconformity two (SU2) records the passage from a tide-influenced depositional system to a fully continental depositional system. The Miocene tidal-influenced deposits in the Beni–Mamore Basin suggest that it experienced a connection, either with the South Atlantic Ocean or the Caribbean Sea or both.     

Internal anatomy of a mixed siliciclastic–carbonate platform: the Late Cenomanian–Mid Turonian at the southern margin of the Spanish Central System

The Late Cenomanian–Mid Turonian succession in central Spain is composed of siliciclastic and carbonate rocks deposited in a variety of coastal and marine shelf environments (alluvial plain–estuarine, lagoon, shoreface, offshore‐hemipelagic and carbonate ramp). Three depositional sequences (third order) are recognized: the Atienza, Patones and El Molar sequences. The Patones sequence contains five fourth‐order parasequence sets, while a single parasequence set is recognized in the Atienza and El Molar sequences. Systems tracts can be recognized both in the sequences and parasequence sets. The lowstand systems tracts (only recognized for Atienza and Patones sequences) are related to erosion and sequence boundary formation. Transgressive systems tracts are related to marine transgression and shoreface retreat. The highstand systems tracts are related to shoreface extension and progradation, and to carbonate production and ramp progradation. Sequences are bounded by erosion or emergence surfaces, whose locations are supported by mineralogical analyses and suggest source area reactivation probably due to a fall in relative sea‐level. Transgressive surfaces are subordinate erosion and/or omission surfaces with a landward facies shift, interpreted as parasequence set boundaries. The co‐existence of siliciclastic and carbonate sediments and environments occurred as facies mixing or as distinct facies belts along the basin. Mixed facies of coastal areas are composed of detrital quartz and clays derived from the hinterland, and dolomite probably derived from bioclastic material. Siliciclastic flux to coastal areas is highly variable, the maximum flux postdates relative sea‐level falls. Carbonate production in these areas may be constant, but the final content is a function of changing inputs in terrigenous sediments and carbonate content diminishes through a dilution effect. Carbonate ramps were detached from the coastal system and separated by a fringe of offshore, fine‐grained muds and silts as distinct facies belts. The growth of carbonate ramp deposits was related to the highstand systems tracts of the fourth‐order parasequence sets. During the growth of these ramps, some sediment starvation occurred basinwards. Progradation and retrogradation of the different belts occur simultaneously, suggesting a sea‐level control on sedimentation. In the study area, the co‐existence of carbonate and siliciclastic facies belts depended on the superimposition of different orders of relative sea‐level cycles, and occurred mainly when the second‐order, third‐order and fourth‐order cycles showed highstand conditions.     

Ichnology of the Callovian-Oxfordian rocks of the Katrol hill range,Kachchh, western India

On the basis of distinct lithologic features such as composition, grain size, bedding characteristics and sedimentary structures, six facies were identified in Callovian to Oxfordian rocks exposed southwest of Bhuj, Kachchh. They are interbedded calcareous shale-siltstone (ICSSF), limestone (LF), ferruginous sandstone (FerSF), felspathic sandstone (FelSF), grey shale (GSF) and oolitic limestone (OLF) facies. The rich and highly diversified trace fossils reveal a wide range of animal behaviours represented by dwelling, feeding, crawling and resting structures. Horizontal feeding structures are found abundantly in all lithofacies indicating low wave and current energy and deposition of poorly sorted muddy to sandy sediments. A few coarse layers containing Arenicolites, Ophiomorpha and Skolithos indicate the presence of opportunistic animals (due to their first appearance under harsh conditions) under -intermittently moderate wave and current energy or storm wave conditions (due to coarse grain size and dominance/presence of only vertical trace fossils) in the shoreface zone. Taenidium occurs mainly in the lower shoreface to transitional zone suggesting low to moderate energy conditions. Thalassinoides occurs in middle to lower shoreface settings under relatively low-energy conditions. Zoophycos represents offshore environment, where it occupies the deepest bioturbation levels.The characteristic lithofacies and assemblages of trace fossils in the rocks of the Chari/Jumara Formation indicate a depositional environment fluctuating from the upper shoreface to offshore zone.     

Sedimentology and depositional environments of the Maastrichtian Patti Formation, southeastern Bida Basin, Nigeria

The Maastrichtian Patti Formation, which consists of shale - claystone and sandstone members, constitutes one of the three Upper Cretaceous lithostratigraphic units of the intracratonic southeastern Bida Basin, in central Nigeria. Well exposed outcrops of this formation were investigated at various locations around the confluence of the Niger and Benue Rivers. The lithostratigraphic sections were measured and their peculiar sedimentological features such as textures, physical and biogenic sedimentary structures, facies variations and associations were documented and used to interpret the depositional environments and develop a paleogeographic model. Some selected representative samples of the sedimentary depositional facies were also subjected to grain size analysis.Three shoreline sedimentary depositional facies composed of shoreface, tidal channel, and tidal marsh to coastal swamp facies were recognized in the study area. Continental sedimentary depositional facies such as fluvial channel, swamp, and overbank were also documented. The sandstones of the shoreface and tidal channel facies are medium- to coarse-grained, moderately sorted (standard deviation ranges from 0.45–1.28 averaging 0.72), and quartzarenitic. The fluvial channel sandstone facies are coarse- to very coarse-grained, mostly poorly sorted (standard deviation ranges from 0.6–1.56 averaging 1.17), and subarkosic. Typical sedimentary structures displayed by the shoreface and tidal channel facies include burrows, clay drapes, hummocky and herringbone cross stratifications, whereas the fluvial channel sandstone facies are dominated by massive and planar cross beddings. The tidal marsh to coastal swamp shales and ferruginised siltstone facies are fossiliferous and bioturbated, whereas the nonmarine swamp siltstones contain vegetal imprints and lignite interbeds. The overbank claystone facies are massive and kaolinitic.In the study area, a regressive to transgressive model is proposed for the Patti Formation. This model correlates with stratigraphically equivalent sediments of the Ajali and Mamu Formations in the adjacent Anambra Basin to a great extent.     

Upper Cretaceous Gongila Formation in the Hawal Basin, northeast Benue Trough: a storm and wave dominated regressive shoreline complex

The Gongila Formation in the Hawal Basin displays lithological characteristics, textural variations and sedimentary structures that facilitate palaeoenvironmental reconstruction. The 41 m thick Gongila succession is divisible into: (i) a mudstone facies association (at the bottom) composed of fossiliferous limestone, clay shale, and sharp-based, graded and swaly-bedded shell debris; and (ii) a cross-stratified sandstone facies association that constitutes the uppermost 60% of the entire succession. The cross-stratified sandstone facies association is further subdivided, on the basis of sedimentary structures, into: (i) a lower interval represented by a coarsening upward fine- to medium-grained sandstone, siltstone and shale in which units characterised by parallel lamination and hummocky cross-stratification pass upward through a zone of small-scale low angle cross-stratification into units characterised by planar cross-stratification and sparse Teichichnus and Skolithos burrow traces; and (ii) an upper interval dominated by fine- to medium-grained sandstone and bioturbated siltstone characterised by erosive based, high angle tangential foresets, subhorizontal laminations and burrow structures belonging to the Thalassinoides, Ophiomorpha and Skolithos ichnogenera.The overall sequence of the Gongila Formation represents progradation on a wave influenced coast, passing from shelf mudstone at the base to lower and upper shoreface sandstones at the top. Each facies association displays an alternation between relatively high energy conditions when sediment was mainly deposited by decelerating suspension laden currents, and relatively low energy conditions when wave reworked fine-grained sediment as it was deposited from suspension. The influence of storms in these conditions is inferred from the associated lithofacies, textural characteristics and sedimentary structures.     

层序地层格架下烃源岩地球化学研究:以尼日尔Termit盆地为例

如何利用有限的烃源岩样品的实验分析数据和地质资料尽可能地提高烃源岩评价和预测的精度,是当今烃源岩地球化学研究亟需解决的问题.采用层序地层学与油气地球化学相结合的方法,研究了非洲尼日尔Termit盆地基于层序地层格架下,上白垩统Yogou组烃源岩空间分布特征及有机质地球化学性质,初步展示了层序地层格架下烃源岩地球化学研究的方法、应用效果及优势.Termit盆地上白垩统Yogou组海相泥页岩是该盆地主要的烃源层,自下而上可划分为YSQ1、YSQ2和YSQ3共3个三级层序.根据层序/体系域发育特征、岩性录井和测井曲线响应特征,识别出外陆棚、内陆棚、三角洲、滨岸相泥岩及煤/炭质泥岩共5种不同沉积类型的烃源岩,不同层序与体系域具有不同的烃源岩纵向叠置关系和横向分布特征.不同类型的烃源岩有机质具有明显不同的地球化学性质:外陆棚和内陆棚泥岩有机质丰度中等-好,有机质生物来源中,低等水生生物贡献高,沉积于偏还原的沉积环境.滨岸和三角洲相泥岩有机质丰度高,具有低等水生生物和高等植物来源的双重贡献,沉积于偏氧化的沉积环境.三级层序或其体系域控制下的沉积相分布和演化导致不同类型烃源岩的发育和横向分布特征,同一沉积相类型的烃源岩具有相似的地球化学性质.与传统的以组、段为单元的烃源岩地球化学研究相比,层序地层格架下的烃源岩评价可以刻画不同层序、不同体系域和沉积相带烃源岩有机质地球化学性质的差异,提高资源评价和油-源对比的精度.      

Sedimentary environments and depositional characteristics of the Middle to Upper Eocene whale‐bearing succession in the Fayum Depression,Egypt

The discovery of whale fossils from Eocene strata in the Fayum Depression has provoked interest in the life and lifestyle of early whales. Excellent outcrop exposure also affords the dataset to develop sedimentological and stratigraphic models within the Eocene strata. Previous work generally asserts that the thick, sand‐rich deposits of the Fayum Depression represent shoreface and barrier island successions with fine‐grained lagoonal and fluvial associations capping progradational successions. However, a complete absence of wave‐generated sedimentary structures, a preponderance of thoroughly bioturbated strata and increasingly proximal sedimentary successions upwards are contrary to accepted models of the local sedimentological and stratigraphic development. This study considers data collected from two Middle to Upper Eocene successions exposed in outcrop in the Wadi El‐Hitan and Qasr El‐Sagha areas of the Fayum Depression to determine the depositional affinities of Fayum strata. Based on sedimentological and ichnological data, five facies associations (Facies Association 1 to Facies Association 5) are identified. The biological and sedimentological characteristics of the reported facies associations indicate that the whale‐bearing sandstones (Facies Association 1) record distal positions in a large, open, quiescent marine bay that is abruptly succeeded by a bay‐margin environment (Facies Association 2). Upwards, marginal‐marine lagoonal and shallow‐bay parasequences (Facies Association 3) are overlain by thick deltaic distributary channel deposits (Facies Association 4). The capping unit (Facies Association 5) represents a transgressive estuarine depositional environment. The general stratigraphic evolution resulted from a regional, tectonically controlled second‐order cycle, associated with northward regression of the Tethys. Subordinate cycles (i.e. third‐order and fourth‐order cycles) are evidenced by several Glossifungites‐ichnofacies demarcated discontinuities, which were emplaced at the base of flooding surfaces. The proposed depositional models recognize the importance of identifying and linking ichnological data with physical–sedimentological observations. As such – with the exception of wave‐generated ravinement surfaces – earlier assertions of wave‐dominated sedimentation can be discarded. Moreover, this study provides important data for the recognition of (rarely reported) completely bioturbated sand‐dominated offshore to nearshore sediments (Facies Association 1) and affords excellent characterization of bioturbated inclined heterolithic stratification of deltaic deposits. Another outcome of the study is the recognition that the whales of the Fayum Depression are restricted to the highstand systems tracts, and lived under conditions of low depositional energy, low to moderate sedimentation rates, and (not surprisingly) in fully marine waters characterized by a high biomass.     

粤北晚泥盆世天子岭组遗迹组构及其环境解释

遗迹组构是由生物成因改造的沉积岩组构,它是物理过程和生物过程相互作用的产物。本文在广东韶关晚泥盆世天子岭组碳酸盐岩沉积中建立了4个遗迹组构,即反映局限台地或封闭海湾环境的Planolies montanus遗迹组构,反映台地潮下低能环境的Thalassinoides—Planolites遗迹组构,反映潮上-潮间环境的．Skolithos遗迹组构和受固底底质控制的Thalassinoides遗迹组构。对遗迹化石和生物扰动构造进行阶层分析,从中识别出受固底底质控制的遗迹化石Thalassinoides.sp,这类遗迹化石常常代表层序地层学中的重要界面。     

Shelf construction in a foreland basin: storm beds, shelf sandbodies, and shelf-slope depositional sequences in the Upper Cretaceous Mesaverde Group, Book Cliffs, Utah

The Upper Cretaceous (Campanian) Kenilworth Member of the Blackhawk Formation (Mesaverde Group) is part of a series of strand plain sandstones that intertongue with and overstep the shelfal shales of the western interior basin of North America. Analysis of this section at a combination of small (sedimentological) and large (stratigraphical) scales reveals the dynamics of progradation of a shelf-slope sequence into a subsiding foreland basin. Four major lithofacies are present in the upper Mancos and Kenilworth beds of the Book Cliffs. A lag sandstone and channel-fill shale lithofacies constitutes the thin, basal, transgressive sequence, which rests on a marine erosion surface. It was deposited in an outer shelf environment. Shale, interbedded sandstone and shale, and amalgamated sandstone lithofacies were deposited over the transgressive lag sandstone lithofacies as a wave-dominated delta and its flanking strand plains prograded seaward. Analysis of grain size and primary structures in Kenilworth beds indicates that there are four basic strata types which combine to build the observed lithofacies. The fine- to very fine-grained graded strata of the interbedded facies are tempestites, deposited out of suspension by alongshelf storm flows (geostrophic flows). There is no need to call on cross-shelf turbidity currents (density underflows) to explain their presence. Very fine- to fine-grained hummocky strata are likewise suspension deposits created by waning storm flows, but were deposited under conditions of more intense wave agitation on the middle shoreface. Cross-strata sets in this region are bed-load deposits that accumulated on the upper shore-face, in the surf zone. Lag strata are multi-event, bed-load deposits that are the product of prolonged storm winnowing. They occur on transgressive surfaces. While the graded beds are tempestites in the strict sense, all four classes of strata are storm deposits. The distribution of strata types and their palaeocurrent orientations suggests a model of the Kenilworth transport system driven by downwelling coastal storm flows, and probably by a northeasterly alongshore pressure gradient. The stratification patterns shift systematically from upper shoreface to lower shoreface and inner shelf lithofacies partly because of a reduction in fluid power expenditure with increasing water depth, but also because of progressive sorting, which resulted in a decrease in grain size in the sediment load delivered to successive downstream environments. The Kenilworth Member and an isolated outlier, the Hatch Mesa lentil, constitute a delta-prodelta shelf depositional system. Their rhythmically bedded, lenticular, sandstone and shale successions are a prodelta shelf facies, and may be prodelta plume deposits. Major Upper Cretaceous sandstone tongues in the Book Cliffs are underlain by erosional surfaces like that beneath the Blackhawk Formation, which extend for many tens of kilometres into the Mancos shale. These surfaces are the boundaries of Upper Cretaceous depositional sequences. The sequences are large-scale genetic stratigraphic units. They result from the arranging of facies into depositional systems; the depositional systems are in turn stacked in repeating arrays, which constitute the depositional sequences. The anatomy of these foreland basin sequences differs     

Depositional environments and ichnology of Upper Cretaceous deep-marine deposits in the Sistan Suture Zone,Birjand, Eastern Iran

The palaeoenvironmental significance of trace fossil assemblages in the flysch deposits of the Upper Cretaceous of the Sistan ocean – the Sefidabeh basin in the Sistan Suture Zone SSZ in Eastern Iran – has been assessed for the first time. The Sefidabeh basin of turbidite origin consists of 10 sedimentary facies, which can be grouped into 3 facies associations (FA) representing submarine channel-related facies associations (FA1), lobe-related facies associations (FA2), distal fan-basin floor facies associations of a deep-water turbidite system (FA3). Thirty three ichnogenera, with many ichnospecies, have been identified in this deep sea succession: Alcyonidiopsis, Arthrophycus, Asterostoma, Belorhaphe, Bergaueria, Cardioichnus, Chondrites, Cosmorhaphe, Desmograpton, Gyrophyllites, Halopoa, Helminthopsis, Helminthorhaphe, Laevicyclus, Lophoctenium, Mammilichnis, Megagrapton, Multina, Nereites, Ophiomorpha, Palaeophycus, Planolites, Phycodes, Phycosiphon, Paleodictyon, Rutichnus, Scolicia, ?Strobilorhaphe, Taenidium, Teichichnus, Thalassinoides, Zoophycos and Urohelminthoida. Their distribution is clearly linked with lithofacies and depositional palaeoenvironments. Changes in trace fossil assemblages and ichnocoenoses follow different environments of the turbidity system of the submarine channel to fan system of the Sefidabeh basin and are associated with variations in environmental controlling factors. Environmental controlling factors including hydrodynamic regime, oxygen level, organic content and sedimentation rates. Ten ichnocoenoses were recognized in the facies associations of the deep-sea fan system of this study. Taking into consideration the diversity, bioturbation level, and colonization order of bioturbated beds and the obvious deepening of the deep-sea depositional system from inner to outer parts of the succession, ichnocoenoses can express a bathymetric trend from shallower to deeper parts, and from higher-to-lower hydrodynamic condition of deep-sea fan systems of the Sefidabeh basin. This study reveals important sedimentological and ichnological features of turbiditic systems in deep sea settings of Iran and permits the development of predictive models for the palaeoenvironmental significance of trace fossil assemblages that can be readily translated to analogous depositional systems in the surface/subsurface.     

Fluvial-shallow marine-glaciofluvial depositional environments of the Ordovician System in Jordan

The Ordovician System, cropping out in southern and west-central Jordan, consists entirely of a 750 m thick clastic sequence that can be subdivided into six formations. The lower Disi Formation starts conformably above the Late Cambrian Umm Ishrin Formation. According to Cruziana furcifera occurring in the upper third of the Disi Formation, an Early Ordovician age is confirmed. The Disi Formation, consisting mainly of downstream accretion (DA) fluvial architectural element, was deposited in a proximal braidplain flowing N–NE from the southerly-located Arabian–Nubian Shield towards the Tethys Seaway. The braidplain depositional environment evolved into a braidplain-dominated delta through the middle and upper parts of the Disi Formation and the lower part of the overlying Um Saham Formation. The delta was replaced by siliciclastic tidal flats, that in turn evolved into an upper to lower shoreface environment through the upper part of the Um Saham Formation. The depositional environment attained the maximum bathymetric depth during the deposition of the lower and central parts of the third unit, the Hiswa Formation, where offshore graptolite-rich mudstone with intercalated hummocky cross-stratified tempestites were deposited. The Tethys Seaway regressed back through the upper part of the Hiswa Formation promoting a resumption of the lower–upper shoreface sedimentation. Oscillation between the lower to upper shoreface depositional environment characterized the entire fourth unit, the Dubaydib Formation, as well as the Tubeiylliat Sandstone Member of the fifth unit, the Mudawwara Formation. The depositional history of the Ordovician sequence was terminated by a glaciofluvial regime that finally was gradually replaced by a shoreface depositional environment throughout the last unit, the Ammar Formation.     

The Lower Permian Wasp Head Formation,Sydney Basin: high‐latitude,shallow marine sedimentation following the late Asselian to early Sakmarian glacial event in eastern Australia

The Lower Permian Wasp Head Formation (early to middle Sakmarian) is a ～95 m thick unit that was deposited during the transition to a non‐glacial period following the late Asselian to early Sakmarian glacial event in eastern Australia. This shallow marine, sandstone‐dominated unit can be subdivided into six facies associations. (i) The marine sediment gravity flow facies association consists of breccias and conglomerates deposited in upper shoreface water depths. (ii) Upper shoreface deposits consist of cross‐stratified, conglomeratic sandstones with an impoverished expression of the Skolithos Ichnofacies. (iii) Middle shoreface deposits consist of hummocky cross‐stratified sandstones with a trace fossil assemblage that represents the Skolithos Ichnofacies. (iv) Lower shoreface deposits are similar to middle shoreface deposits, but contain more pervasive bioturbation and a distal expression of the Skolithos Ichnofacies to a proximal expression of the Cruziana Ichnofacies. (v) Delta‐influenced, lower shoreface‐offshore transition deposits are distinguished by sparsely bioturbated carbonaceous mudstone drapes within a variety of shoreface and offshore deposits. Trace fossil assemblages represent distal expressions of the Skolithos Ichnofacies to stressed, proximal expressions of the Cruziana Ichnofacies. Impoverished trace fossil assemblages record variable and episodic environmental stresses possibly caused by fluctuations in sedimentation rates, substrate consistencies, salinity, oxygen levels, turbidity and other physio‐chemical stresses characteristic of deltaic conditions. (vi) The offshore transition‐offshore facies association consists of mudstone and admixed sandstone and mudstone with pervasive bioturbation and an archetypal to distal expression of the Cruziana Ichnofacies. The lowermost ～50 m of the formation consists of a single deepening upward cycle formed as the basin transitioned from glacioisostatic rebound following the Asselian to early Sakmarian glacial to a regime dominated by regional extensional subsidence without significant glacial influence. The upper ～45 m of the formation can be subdivided into three shallowing upward cycles (parasequences) that formed in the aftermath of rapid, possibly glacioeustatic, rises in relative sea‐level or due to autocyclic progradation patterns. The shift to a parasequence‐dominated architecture and progressive decrease in ice‐rafted debris upwards through the succession records the release from glacioisostatic rebound and amelioration of climate that accompanied the transition to broadly non‐glacial conditions.     

Ichnofabric characterization of a deep‐marine clastic system: a subsurface study of the Middle Eocene Ainsa System,Spanish Pyrenees

This paper documents a subsurface trace fossil and ichnofabric study of the proximal parts of a structurally confined and channelized sand‐rich, lower slope and proximal basin‐floor deep‐marine system in the Middle Eocene Ainsa basin, Spanish Pyrenees. Five depositional environments are recognized based on sedimentary facies associations, depositional architecture and stratigraphic context (channel axis, channel off‐axis, channel margin, leveé‐overbank and interfan), as well as a channel abandonment phase. Each environment is characterized by distinct and recurring ichnofabrics. Ichnological measurements and observations were recorded from six cores recovered from six wells drilled at a spacing of between 400 m and 500 m at outcrop, and totalling 1213 m in length. From channel axis to levée‐overbank environments, there is a trend of increasing bioturbation intensity and ichnodiversity. Ichnofabrics in channel axis and channel off‐axis environments are characterized by low bioturbation intensity and low ichnodiversity. Thalassinoides‐dominated firmground ichnofabrics associated with erosive sediment gravity flows are common in these environments. In contrast, channel margin and levée‐overbank environments are characterized by ichnofabrics associated with high bioturbation intensity and ichnodiversity. Sediments of the interfan are characterized by the highest bioturbation intensity, associated with burrow mottling and an absence of primary sedimentary structures. This paper demonstrates that in core‐based studies, ichnofabric analysis is an important and valuable tool in discriminating between different environments in channelized deep‐marine siliciclastic systems. The results of this study should find wide applicability in reservoir characterization studies in the petroleum industry, in field‐based analogue ichnofabric studies and other core‐based studies in deep‐water siliciclastic systems worldwide such as the Integrated Ocean Drilling Program.     

Normal faulting as a control on the stratigraphic development of shallow marine syn-rift sequences: the Nukhul and Lower Rudeis Formations, Hammam Faraun fault block, Suez Rift, Egypt

Tectono-stratigraphic analysis of the East Tanka fault zone (ETFZ), Suez Rift, indicates that the evolution of normal fault segments was an important control on syn-rift depositional patterns and sequence stratigraphy. Sedimentological and stratigraphic analysis of the Nukhul Formation indicates that it was deposited in a narrow (ca 1–2 km), elongate (ca 5 km), fault-bounded, tidally influenced embayment during the low subsidence rift-initiation phase. The Nukhul Formation is composed of transgressive (TST) and highstand (HST) systems tract couplets interpreted as reflecting fault-driven subsidence and the continuous creation of accommodation in the hangingwall to the ETFZ. The overlying Lower Rudeis Formation was deposited during the high subsidence rift-climax phase, and is composed of forced regressive systems tract (FRST) shallow marine sandbodies, and TST to HST offshore mudstones. Activity on the ETFZ led to marked spatial variability in stratal stacking patterns, systems tracts and key stratal surfaces, as footwall uplift, coupled with regressive marine erosion during deposition of FRST sandbodies, led to the removal of intervening TST–HST mudstone-dominated units, and the amalgamation of FRST sandbodies and the stratal surfaces bounding these units in the footwall. This study indicates that the evolution of normal fault segments over relatively short (i.e. <1 km) length-scales has the potential to enhance or suppress a eustatic sea-level signal, leading to marked spatial variations in stratal stacking patterns, systems tracts and key stratal surfaces. Crucially, these variations in sequence stratigraphic evolution may occur within time-equivalent stratal units, thus caution must be exercised when attempting to correlate syn-rift depositional units based solely on stratal stacking patterns. Furthermore, local, tectonically controlled variations in relative sea level can give rise to syn-rift stacking patterns which are counterintuitive in the context of the structural setting and perceived regional subsidence rates.     

Geomorphological and sequence stratigraphic variability in wave‐dominated,shoreface‐shelf parasequences

Abstract Physical stratigraphy within shoreface‐shelf parasequences contains a detailed, but virtually unstudied, record of shallow‐marine processes over a range of historical and geological timescales. Using high‐quality outcrop data sets, it is possible to reconstruct ancient shoreface‐shelf morphology from clinoform surfaces, and to track the evolving morphology of the ancient shoreface‐shelf. Our results suggest that shoreface‐shelf morphology varied considerably in response to processes that operate over a range of timescales. (1) Individual clinoform surfaces form as a result of enhanced wave scour and/or sediment starvation, which may be driven by minor fluctuations in relative sea level, sediment supply and/or wave climate over short timescales (10¹?10³ years). These external controls cannot be distinguished in vertical facies successions, but may potentially be differentiated by the resulting clinoform geometries. (2) Clinoform geometry and distribution changes systematically within a single parasequence, reflecting the cycle in sea level and/or sediment supply that produced the parasequence (10²?10⁵ years). These changes record steepening of the shoreface‐shelf profile during early progradation and maintenance of a relatively uniform profile during late progradation. Modern shorefaces are not representative of this stratigraphic variability. (3) Clinoform geometries vary greatly between different parasequences as a result of variations in parasequence stacking pattern and relict shelf morphology during shoreface progradation (10⁵?10⁸ years). These controls determine the external dimensions of the parasequence.