西北太平洋俯冲带大地幔楔及地幔过渡带各向异性证据和特征

地震层析成像研究清晰给出了地球深部俯冲板片的大尺度形态,但与俯冲过程相关的地幔流动特征仍不明确.在俯冲地幔楔系统中,前人观测到了与海沟平行和垂直的快波偏振方向.本文研究了西北太平洋俯冲板片在地幔过渡带中停滞形成的"大地幔楔"中的各向异性特征.对具有长期稳定观测数据的MDJ台站SKS震相和区域深源地震的直达S波震相进行了...     

Generation of Cenozoic intraplate basalts in the big mantle wedge under eastern Asia

The roles of subduction of the Pacific plate and the big mantle wedge (BMW) in the evolution of east Asian continental margin have attracted lots of attention in past years. This paper reviews recent progresses regarding the composition and chemical heterogeneity of the BMW beneath eastern Asia and geochemistry of Cenozoic basalts in the region, with attempts to put forward a general model accounting for the generation of intraplate magma in a BMW system. Some key points of this review are summarized in the following. (1) Cenozoic basalts from eastern China are interpreted as a mixture of high-Si melts and low-Si melts. Wherever they are from, northeast, north or south China, Cenozoic basalts share a common low-Si basalt endmember, which is characterized by high alkali, Fe₂O₃^T and TiO₂ contents, HIMU-like trace element composition and relatively low ²⁰⁶Pb/²⁰⁴Pb compared to classic HIMU basalts. Their Nd-Hf isotopic compositions resemble that of Pacific Mantle domain and their source is composed of carbonated eclogites and peridotites. The high-Si basalt endmember is characterized by low alkali, Fe₂O ₃ ^T and TiO₂ contents, Indian Mantle-type Pb-Nd-Hf isotopic compositions, and a predominant garnet pyroxenitic source. High-Si basalts show isotopic provinciality, with those from North China and South China displaying EM1-type and EM2-type components, respectively, while basalts from Northeast China containing both EM1- and EM2-type components. (2) The source of Cenozoic basalts from eastern China contains abundant recycled materials, including oceanic crust and lithospheric mantle components as well as carbonate sediments and water. According to their spatial distribution and deep seismic tomography, it is inferred that the recycled components are mostly from stagnant slabs in the mantle transition zone, whereas EM1 and EM2 components are from the shallow mantle. (3) Comparison of solidi of garnet pyroxenite, carbonated eclogite and peridotite with regional geotherm constrains the initial melting depth of high-Si and low-Si basalts at <100 km and ～300 km, respectively. It is suggested that the BMW under eastern Asia is vertically heterogeneous, with the upper part containing EM1 and EM2 components and isotopically resembling the Indian mantle domain, whereas the lower part containing components derived from the Pacific mantle domain. Contents of H₂O and CO₂ decrease gradually from bottom to top of the BMW. (4) Melting of the BMW to generate Cenozoic intraplate basalts is triggered by decarbonization and dehydration of the slabs stagnated in the mantle transition zone.     

Decratonic gold deposits

The North China Craton(NCC) hosts numerous gold deposits and is known as the most gold-productive region of China. The gold deposits were mostly formed within a few million years in the Early Cretaceous(130–120 Ma), coeval with widespread occurrences of bimodal magmatism, rift basins and metamorphic core complexes that marked the peak of lithospheric thinning and destruction of the NCC. Stable isotope data and geological evidence indicate that ore-forming fluids and other components were largely exsolved from cooling magma and/or derived from mantle degassing during the period of lithospheric extension. Gold mineralization in the NCC contrasts strikingly with that of other cratons where gold ore-forming fluids were sourced mostly from metamorphic devolatization in compressional or transpressional regimes. In this paper, we present a summary and discussion on time-space distribution and ore genesis of gold deposits in the NCC in the context of the timing, spatial variation, and decratonic processes. Compared with orogenic gold deposits in other cratonic blocks, the Early Cretaceous gold deposits in the NCC are quite distinct in that they were deposited from magma-derived fluids under extensional settings and associated closely with destruction of cratonic lithosphere. We argue that Early Cretaceous gold deposits in the NCC cannot be classified as orogenic gold deposits as previously suggested, rather, they are a new type of gold deposits, termed as "decratonic gold deposits" in this study. The westward subduction of the paleo-West Pacific plate(the Izanagi plate) beneath the eastern China continent gave rise to an optimal tectonic setting for large-scale gold mineralization in the Early Cretaceous. Dehydration of the subducted and stagnant slab in the mantle transition zone led to continuous hydration and considerable metasomatism of the mantle wedge beneath the NCC. As a consequence, the refractory mantle became oxidized and highly enriched in large ion lithophile elements and chalcophile elements(e.g., Cu, Au, Ag and Te). Partial melting of such a mantle would have produced voluminous hydrous, Au- and S-bearing basaltic magma, which, together with crust-derived melts induced by underplating of basaltic magma, served as an important source for ore-forming fluids. It is suggested that the Eocene Carlin-type gold deposits in Nevada, occurring geologically in the deformed western margin of the North America Craton, are comparable with the Early Cretaceous gold deposits of the NCC because they share similar tectonic settings and auriferous fluids. The NCC gold deposits are characterized by gold-bearing quartz veins in the Archean amphibolite facies rocks, whereas the Nevada gold deposits are featured by fine-grained sulfide dissemination in Paleozoic marine sedimentary rocks. Their main differences in gold mineralization are the different host rocks, ore-controlling structures, and ore-forming depth. The similar tectonic setting and ore-forming fluid source, however, indicate that the Carlin-type gold deposits in Nevada are actually analogous to decratonic gold deposits in the NCC. Gold deposits in both the NCC and Nevada were formed in a relatively short time interval(10 Myr) and become progressively younger toward the subduction zone. Younging of gold mineralization toward subduction zone might have been attributed to retreat of subduction zone and rollback of subducted slab. According to the ages of gold deposits on inland and marginal zones, the retreat rates of the Izanagi plate in the western Pacific in the Early Cretaceous and the Farallon plate of the eastern Pacific in the Eocene are estimated at 8.8 cm/yr and 3.3 cm/yr, respectively.     

The genesis and resource potential of gold deposits in the Liaodong Peninsula

Plenty of gold deposits related to Late Mesozoic craton destruction are widely distributed in eastern North China Craton. However, significant differences in research degrees, ore-forming characteristics, and proven reserves exist among different regions in the North China Craton. The Liaodong Peninsula has similar regional geological characteristics to those of the Jiaodong Peninsula, with both experiencing craton destruction during Late Mesozoic, but the two areas have substantial differences ...     

Recycling in the Puerto Rican mantle wedge, Greater Antilles Island Arc

Abstract The initial volcanic phase of Cretaceous island arc strata in central Puerto Rico, at the eastern end of the extinct Greater Antilles Arc, comprises a 6‐km thick pile of lava and volcanic breccia (Río Majada Group). Preserved within the sequence is a conspicuous shift in absolute abundances of the more incompatible elements, including Th, Nb, and the light rare earth elements (LREE: La, Ce, Pr and Nd). The compositional shift is marked by a decrease in La/Sm from averages of 2.11 in the lowest third of the pile (Formation A) to 1.48 at the top (Formation C), and by a distinctive flattening of LREE segments of chondrite‐normalized REE patterns. i⁸⁷Sr/⁸⁶Sr and ?_Nd average about 0.7035 and 8.2, respectively, in early Formation A basalts. These ranges normally overlap samples from later Formations B and C. Isotope compositions of the latter group are more variable, however, and several samples are considerably more radiogenic than Formation A basalts, such that i⁸⁷Sr/⁸⁶Sr averages almost 0.7042 while ?_Nd‐values decrease to 7.5 in Formation B and C basalts. Theoretical models of non‐modal melting processes in both amphibole peridotite and spinel lherzolite sources provide insight into the origin of depleted Th, Nb, and LREE abundances in Puerto Rican basalts. Low Nb concentrations less than normal mid‐oceanic ridge basalts in Formation A basalts indicate the wedge was slightly depleted by low‐volume decompression fusion due to induced convection in the back‐arc region prior to entry of the source into the arc melting zone. However, depleted patterns in Formation C basalts cannot be generated by relatively greater degrees of decompression fusion in the back‐arc, because addition of the La‐enriched slab‐derived component to more depleted source material invariably produces elevated rather than decreased La/Sm. Refluxing of Formation A harzburgitic residua is similarly precluded. In contrast, the observed patterns are readily reproduced by multistage melting models involving hybridized sources containing normal Formation A lherzolite source material blended with recycled, unrefluxed harzburgite residua. Successful models require hybrid sources containing large volumes of recycled harzburgite (up to 50%) during generation of Formation C basalts. Slightly elevated radiometric Sr and Nd isotopes in a few flows from Formation C are attributed to partial refluxing of the hybrid sources within the wedge.     

Geological and geochemical character and genesis of the Jinlongshan-Qiuling gold deposits in Qinling orogen: Metallogenic mechanism of the Qinling-pattern Carlin-type gold deposits

The Qinling Carlin-type gold deposit belt is the second largest Carlin-type gold ore concentrated area in the world and occurs in Mesozoic intracontinental collisional orogen, contrasting to the Carlin-type gold deposits in the Basin and Range province in Cenozoic active continental margin of West America. With ore-forming ages focussed at the range of 197.45–129.45 Ma, its metallogenic geodynamic background was the decompression-pyrogenation regime at the transition stage from collisional compression to extension, indicating that gold mineralization synchronized with the Mesozoic continental collision. Geochemical studies discover that ore fluids and materials mainly came from the Hercynian-Indosinian tectonic layer. Mesozoic intracontinental subduction of Hercynian-Indosinian association along the Shuanghe-Gongguan fault led to the formation of Jinlongshan-Qiuling gold deposits. Accordingly, the tectonic metallogenic model is established for Qinling-pattern Carlin-type gold deposits.     

The distribution,characteristics and fluid sources of lode gold deposits: An overview

Lode gold deposits are among the most economically important types of gold deposits in the world. Globally, they formed mainly in three time intervals, 2.8 to 2.5 Ga, 2.1 to 1.8 Ga, and 700 Ma to the present. Sources of ore-forming fluids and other components are of critical importance in a better understanding of the genesis and the geodynamic controls of these deposits. Although ore-forming fluids were mostly derived from devolatization of sedimentary and/or volcanic sequences during greenschist to amphibolite facies metamorphism associated with orogenic deformation, magmatic hydrothermal fluids have been increasingly shown to be important in many gold deposits in various regions. In this review paper, we summarize the major features of lode gold deposits, possible sources of ore-forming fluids, and mechanisms of gold mineralization. While we acknowledge the critical role of metamorphically derived fluids in the genesis of such deposits worldwide, we emphasize that mantle-or basaltic magma-derived fluids may have been much more important than commonly thought. We use the Liaodong peninsula of the North China Craton as an example to demonstrate the significance of mantle-derived fluids. Integrating earlier studies and new data, we show that some of the late Mesozoic lode gold deposits in the North China Craton may have formed from magmatic hydrothermal fluids due to the extension and partial melting of the hydrated, metasomatized subcontinental lithosphere mantle, as best exemplified by the Wulong gold deposit.     

Peridotites from the southern Mariana forearc: Heterogeneous fluid supply in mantle wedge

Detailed petrological work was carried out on serpentinized peridotite dredged and sampled by submersible from the southern part of the Mariana Trench to reveal the nature of the mantle wedge in the southern Mariana forearc. The southern part of the Mariana Trench is important in that we should expect to find a transect of a typical island arc structure; that is, from east to west, the Mariana forearc, the Mariana arc proper, the Mariana Trough (active back-arc spreading center), and the West Mariana Ridge (remnant arc). The most striking feature of peridotites from the southern part of the trench is that primary hornblende is a major constituent mineral in many specimens. Thus, the peridotite samples are divided into anhydrous (A-type), hydrous (H-type) and intermediate (I-type) groups. Petrological data suggest that each type of peridotite is a residue of extensive partial melting in the upper mantle. It is argued here that the I- and H-type peridotites were modified from `proto-A-type peridotite' by fluid infiltration. The fluid was enriched in Al, Ti, Fe, and alkalis, and may have caused changes in mineral and bulk chemical compositions of the peridotites. A-type peridotite derives from the `proto-A-type peridotite' directly, without any fluid contamination. After the formation of the `proto-A-, I-, and H-type peridotites', lower-temperature fluids, probably of seawater origin, produced retrograde metamorphism and alteration including serpentinization. The mantle wedge in the southern Mariana forearc was heterogeneous in fluid supply.     

Geophysical implications of Izu–Bonin mantle wedge hydration from chemical geodynamic modeling

Using two-dimensional dynamic models of the Northern Izu–Bonin (NIB) subduction zone, we show that a particular localized low-viscosity (η_LV =  3.3 × 10¹⁹ − 4.0 × 10²⁰ Pa s), low-density (Δρ ∼ −10 kg/m³ relative to ambient mantle) geometry within the wedge is required to match surface observations of topography, gravity, and geoid anomalies. The hydration structure resulting in this low-viscosity, low-density geometry develops due to fluid release into the wedge within a depth interval from 150 to 350 km and is consistent with results from coupled geochemical and geodynamic modeling of the NIB subduction system and from previous uncoupled models of the wedge beneath the Japan arcs. The source of the fluids can be either subducting lithospheric serpentinite or stable hydrous phases in the wedge such as serpentine or chlorite. On the basis of this modeling, predictions can be made as to the specific low-viscosity geometries associated with geophysical surface observables for other subduction zones based on regional subduction parameters such as subducting slab age.     

Low water contents in pyroxenes from spinel-peridotites of the oxidized, sub-arc mantle wedge

Pyroxene water contents measured by Fourier transform infrared spectrometry for Mexican and Simcoe (WA, USA) spinel-peridotite xenoliths range from 140 to 528 ppm in clinopyroxenes and 39 to 265 ppm in orthopyroxenes. Correlations between these water contents and major-element compositional data for the pyroxenes, associated spinels, and whole-rock xenoliths demonstrate that these water contents record mantle values that have not been perturbed since the xenoliths were brought to the surface by their host magmas. Broad positive correlations of pyroxene water contents with whole-rock Al₂O₃ are consistent with water behaving as an incompatible element during peridotite melting. The main control on the range of pyroxene water contents, however, appears to be the redox state of the peridotite, because estimates of oxygen fugacity from Mössbauer (Simcoe) and microprobe data (Mexico) on spinels are negatively correlated with water contents. This is consistent with the dominant mechanism of H incorporation into pyroxene, which is dependent on the oxidation-reduction of iron. Metasomatism of sub-arc mantle-wedge peridotites by oxidized fluids or melts rising from the slab raises the oxygen fugacity of the peridotites, and where temperature is high enough, induces them to partially melt. The oxidation, in turn, lowers the solubility of water in the peridotite minerals, causing more than half of the original water to be expelled. That water enters the hydrous partial melts and these ascend through the lithosphere to feed the arc magmatic system in the upper crust. Low water contents in pyroxenes from sub-arc mantle-wedge peridotites, such as those from Simcoe and some western Mexican sites, therefore appear to be complementary to the high water contents that characterize subduction-zone magmas and fuel their explosive eruptions. An estimate of water budget in subduction zones, however, indicates that the amount of water coming from the dehydration of mantle-wedge anhydrous minerals probably accounts for less than 5% of the total water present in subduction-related magmas. The high water contents of arc magmas thus are mainly attributed to fluids or melts from the slab proper. The relatively dry sub-arc mantle wedge appears to be an effective medium through which subducted water is transported from slabs toward the surface.     

Relationship between light rare earth deposits and mantle processes in Panxi rift, China

Many light rare earth deposits, such as Maoniuping, Dalucao, Panzhihua deposits, are collectively distributed in Panxi rift of Sichuan Province, China, and closely associated with the aegirine quartz syenite-carbonatite complex. Carbon and oxygen isotope studies demonstrate that the carbonatites in the complex are of typical igneous origin related to mantle processes. Electronic microprobe studies show that the fluid-melt inclusions found in the complex are enriched in light rare earth elements (LREE), which suggests that the magma was rich in LREE and could serve as the ore source for the regional LREE mineralization. Both the aegirine quartz syenite-carbonatite complex and the LREE mineralization found therein were derived from the mantle. The rare gas isotope analyses also support that there is a genetic association between the LREE mineralization and mantle processes.     

Relationship between light rare earth deposits and mantle processes in Panxi rift,China

Many light rare earth deposits, such as Maoniuping, Dalucao, Panzhihua deposits, are collectively distributed in Panxi rift of Sichuan Province, China, and closely associated with the aegirine quartz syenite-carbonatite complex. Carbon and oxygen isotope studies demonstrate that the carbonatites in the complex are of typical igneous origin related to mantle processes. Electronic microprobe studies show that the fluid-melt inclusions found in the complex are enriched in light rare earth elements (LREE), which suggests that the magma was rich in LREE and could serve as the ore source for the regional LREE mineralization. Both the aegirine quartz syenite-carbonatite complex and the LREE mineralization found therein were derived from the mantle. The rare gas isotope analyses also support that there is a genetic association between the LREE mineralization and mantle processes.     

Relationship between light rare earth deposits and mantle processes in Panxi rift,China

Many light rare earth deposits, such as Maoniuping, Dalucao, Panzhihua deposits, are collectively distributed in Panxi rift of Sichuan Province, China, and closely associated with the aegirine quartz syenite-carbonatite complex. Carbon and oxygen isotope studies demonstrate that the carbonatites in the complex are of typical igneous origin related to mantle processes. Electronic microprobe studies show that the fluid-melt inclusions found in the complex are enriched in light rare earth elements (LREE), which suggests that the magma was rich in LREE and could serve as the ore source for the regional LREE mineralization. Both the aegirine quartz syenite-carbonatite complex and the LREE mineralization found therein were derived from the mantle. The rare gas isotope analyses also support that there is a genetic association between the LREE mineralization and mantle processes.

     

Au-Sb association and fractionation in micro-disseminated gold deposits,southwestern Guizhou--geochemistry and thermodynamics

The dual geochemical character of paragenesis and fractionation between gold,arsenic and antimony in micro-disseminated gold deposits in southwestern Guizhou is discussed in terms of spatial distribution of independent deposits,lateral and vertical enrichment,mineralization stage and factor and correlation analyses.Thermodynamic calculations of solubility and speciation of gold and antimony minerals indicate that gold is transported in hydrothermal solution as Au(HS)-2 and antimony is mainly as Sb(OH)03 although HSb2S-4 may be of increasing importance in acid environment at low temperatures during the late stage of mineralization.Changes in physicochemical conditions hold the key to the association and fractionation between gold and antimony.Gold and antimony response differently to physicochemical variations because they are distinct from each other in soluble speciation and mineral solubility,leading to precipitation at different times and localities during hydrothermal evolution.     

Subduction of mantle wedge peridotites: Evidence from the Higashi-akaishi ultramafic body in the Sanbagawa metamorphic belt

The Higashi-akaishi garnet-bearing ultramafic body in the Sanbagawa metamorphic belt, Southwest Japan, represents a rare example of oceanic-type ultrahigh-pressure metamorphism. The body of 2 km × 5 km is composed mostly of anhydrous dunite with volumetrically minor lenses of clinopyroxene-rich rocks. Dunite samples contain high Ir-type platinum group elements (PGE) and Cr in bulk rocks, high Mg and Ni in olivine, and high Cr in spinel. On the other hand, clinopyroxene-rich rocks contain low concentrations of Ir-type PGE and Cr, high concentrations of fluid-mobile elements in bulk rocks, and low Ni and Mg in olivine. Clinopyroxene is diopsidic with low Al₂O₃. The compositions of bulk rocks and mineral chemistry of spinel, olivine, and clinopyroxene suggest that the olivine-dominated rocks are residual mantle peridotites after high degrees of influx partial melting, and that the clinopyroxene-rich rocks are cumulates of subduction-related melts. Thus, the Higashi-akaishi ultramafic body originated from the interior of the mantle wedge, most likely the forearc upper mantle. It was then incorporated into the Sanbagawa subduction channel by a mantle flow, and underwent high pressure metamorphism to a depth greater than 100 km. Such a strong active flow in the mantle wedge is likely facilitated by the lack of serpentinites along the interface between the slab and the overlying mantle, as it was too hot for serpentine. These unusually hot conditions and strong active mantle flow may reflect conditions in the earliest stage of development of subduction, and may have been maintained by massive upwelling and subsequent eastward flow of asthenospheric mantle in the northeastern Asian continent in Cretaceous time when the Sanbagawa belt began to form.     

Gold deposits in the representative gold concentration districts,North China Craton

<正>North China Craton(NCC)is the most important gold occurrence region in China,and also one of the most important gold districts in the world(Wei et al.,1994;Zhou et al.,2002;Goldfarb et al.,2014).Gold deposits in the region are mostly distributed in the margins of the NCC.Main gold concentration districts include Jiaodong in the eastern margin,     

Rheological contrast between garnet and clinopyroxene in the mantle wedge: An example from Higashi-akaishi peridotite mass,SW Japan

Garnet clinopyroxenites occur within foliated dunite in the Higashi-akaishi peridotite mass, located within the subduction-type high-pressure/low-temperature Sanbagawa metamorphic belt. The garnet clinopyroxenites contain 3–80% garnet, and garnet and clinopyroxene are homogeneously distributed. Garnet crystals contain extensive, regular dislocation arrays and dislocation networks, suggesting that dislocation creep was the dominant deformation mechanism. Analyses of crystallographic orientation maps indicate similar grain sizes and aspect ratios for garnet and clinopyroxene, regardless of modal composition, indicating that these minerals deformed with similar degree of plasticity. Moreover, indexes of crystallographic fabric intensity (i.e., J-index and M-index) for both garnet and clinopyroxene tend to increase with increasing modal composition of garnet. Fourier-transform infrared spectroscopy analysis revealed that water content in garnet is ～60 ppm, whereas that in clinopyroxene is ～70 ppm. Olivine crystal-preferred orientations in the Higashi-akaishi peridotite mass, characterized by [0 0 1] (0 1 0), are thought to have developed during deformation under wet conditions. Consequently, we argue that the presence of water could act to enhance garnet plasticity during deformation. The results reveal contrasting influences of water on the deformation of garnet and diopside: under wet conditions compared with dry, the strain rate increases by two orders of magnitude for garnet but by an order of magnitude for diopside. Given the influence of water on the creep strength of garnet, garnet within the Higashi-akaishi mass may have become significantly as weak as clinopyroxene during deformation.     

The geoid and single-cell mantle convection

The geoid shows an antisymmetric departure from the spheroid of best fit. A single zero-elevation contour divides its surface into nearly equal strips in one of which the elevation is everywhere positive and in the other everywhere negative. These two areas are interleaved roughly like the strips covering a tennis ball. This pattern may indicate global single-cell convection in the mantle. It is argued that on this convection hypothesis, the upcurrents underlie the low-geoid strip, although the opposite view could be supported. No simple relation is to be expected between the proposed whole-mantle convection and plate motions, because other constraints act on plates and because the asthenosphere will partially decouple the whole-mantle motions from the lithosphere. However, the proposed whole-mantle convective system is consistent with rapid northwestward motion of the Pacific plate, with fast spreading of the East Pacific Rise and with slow spreading of the North Atlantic Ridge. Seismological velocity anomalies in the mantle, while highly relevant to whole-mantle convection, do not at present decide for or against the hypothesis here advanced.     

Geophysical exploration for interlayer slip breccia gold deposits: example from Pengjiakuang gold deposit, Shandong Province, China

Interlayer slipping breccia‐type gold deposit – a new type of gold deposit, defined recently in the northern margin of the Jiaolai Basin, Shandong Province, China – occurs in interlayer slip faults distributed along the basin margin. It has the features of large orebody thickness (ranging from 14 m to 46 m, with an average thickness of 30 m), shallow embedding (0–50 m thickness of cover), low tenor of gold ore (ranging from 3 g/t to 5 g/t), easy mining and ore dressing. This type of gold deposit has promising metallogenic forecasting and potential for economic exploitation. A ground gamma‐ray survey in the Pengjiakuang gold‐ore district indicates that the potassium/thorium ratio is closely related to the mineralization intensity, i.e. the larger the potassium/thorium ratio, the higher the mineralization. The gold mineralized alteration zone was defined by a potassium/thorium ratio of 0.35. A seismic survey confirms the location of the top and bottom boundaries and images various features within the Pengjiakuang gold mineralization belt. The gold‐bearing shovel slipped belt dips to the south at an angle of 50–55° at the surface and 15–20° at depth. The seismic profile is interpreted in terms of a structural band on the seismic section characterized by a three‐layered model. The upper layer is represented by weakly discontinuous reflections that represent the overlying conglomerates. A zone of stronger reflections representing the interlayer slip fault (gold‐bearing mineralized zone) is imaged within the middle of the section, while the strongest reflections are in the lower part of the section and represent metamorphic rocks at depth. At the same time, the seismic reflection survey confirms the existence of a granite body at depth, indicating that ore‐forming fluids may be related to the granite. A CSAMT survey showed that the gold‐bearing mineralized zone is a conductive layer and contains a low‐resistivity anomaly ranging from 2 Ωm to 200 Ωm.     

Large clusters of gold deposits and large-scale metallogenesis in the Jiaodong Peninsula, Eastern China

The Jiaodong Peninsula is the largest repository of gold in China based on the production in history. It covers less than 0.2% of China’s territory, but production of gold accounts for about one fourth of the whole country. Thus, the Jiaodong Peninsula is a typical area or case of large-scale metallogenesis and a large clusters of mineral deposits in China. It is characterized by the large clusters of gold deposits in large scale, high reserve and short mineralizing stage. In this study, we suggest that the eastern boundary of the large clusters of gold deposits is as same as that of North China Block, the gold deposits are hosted by Archean metamorphic rocks or Mesozoic granites, and the age of gold mineralization is 121.6 to 122.7 Ma. Gold and related ore-forming materials are derived from multisources, i.e. Archean metamorphic rocks, granites and intermediate-mafic dikes, especially, intermediate-mafic dikes and calc-alkaline granites. The metallogenic geodynamic process is constrained by the tectonic evolution of eastern North China Block during Late Mesozoic, and it is the result of the interaction between mantle and crust as the boundary plates are playing role on the block.