多尺度CT成像技术识别超低渗透砂岩储层纳米级孔喉

以鄂尔多斯盆地X地区长6储层为研究对象,利用多尺度CT成像技术、聚焦离子束扫描电镜技术,结合Avizo软件的强大数据处理和数值模拟功能,对研究区目的层岩石样品进行不同尺度孔喉分维数重构,建立三维超低渗透砂岩储层纳米级孔隙结构模型.研究表明,微米尺度下,超低渗透砂岩储层孔喉形态呈点状、球状和条带状及管状.储集空间类型以溶蚀微孔为主且多孤立分布,局部孔隙为片状,连通性较差.纳米尺度下,超低渗透砂岩储层孔喉系统整体较发育,孔喉形态呈球状、短管状.远离裂隙处多为孤立状,连通性较差,仅具有储集能力.微裂缝、粒间缝发育部位多为短管状,有一定连通性,相当于喉道.微观非均质性较强,岩样整体较致密,局部相互连通,溶蚀孔及裂隙对储集能力、渗滤能力具有控制作用.数值计算求得目的层A、Y、C三个样品的孔隙度分别为6.95%、5.55%、4.44%,渗透率分别为0.828×10^-3μm^2、0.115×10^-3μm^2、0.00065×10^-3μm^2.聚焦离子束扫描电镜与多尺度CT成像技术相结合能够定量表征超低渗透砂岩储层微、纳米级孔隙结构.     

Pressure effects on the joint elastic‐electrical properties of reservoir sandstones

We conducted a laboratory study of the joint elastic‐electrical properties of sixty‐three brine‐saturated sandstone samples to assess the likely impact of differential pressure (confining minus pore fluid pressures) in the range 8–60 MPa on the joint interpretation of marine seismic and controlled‐source electromagnetic survey data. The samples showed a wide range of petrophysical properties representative of most sandstone reservoirs. We found that a regression equation comprising both a constant and an exponential part gave a good fit to the pressure dependence of all five measured geophysical parameters (ultrasonic P‐ and S‐wave velocity, attenuation and electrical resistivity). Electrical resistivity was more pressure‐sensitive in clay‐rich sandstones with higher concentrations of low aspect ratio pores and micropores than in clean sandstones. Attenuation was more pressure‐sensitive in clean sandstones with large open pores (macropores) than in clay‐rich sandstones. Pore shape did not show any influence on the pressure sensitivity of elastic velocity. As differential pressure increases, the effect of the low aspect ratio pores and micropores on electrical resistivity becomes stronger than the effect of the macropores on attenuation. Further analysis of correlations among the five parameters as a function of pressure revealed potentially diagnostic relationships for geopressure prediction in reservoir sandstones.     

有效应力变化对致密砂岩孔隙结构及弹性波响应的影响规律

致密砂岩气藏具有裂缝发育和有效应力高的特征,研究不同有效压力下孔、裂隙介质地震波传播特征,有利于地震解释与地下储层的识别.但是前人的研究较少考虑岩石内部微观孔隙结构特征与孔隙、裂隙间流体流动的关系.本文首先通过选取四川盆地典型致密砂岩岩样,在不同有效压力下对岩石样本进行超声波实验测量.然后基于实验测得的纵、横波速度进行裂隙参数反演,得到不同有效压力下致密砂岩样本的裂隙孔隙度.再将裂隙孔隙度和样本岩石物理参数代入双重孔隙介质模型,模拟得到不同有效压力下饱水致密砂岩样本纵横波速度频散和衰减的变化规律.结果表明模型预测的速度频散曲线与纵波速度实验测量结果能够较好的吻合.最后统计分析了致密砂岩裂隙参数,得到了致密砂岩储层裂隙参数随有效压力及孔隙度变化特征.依据实际岩石物理参数建立模型,其裂隙参数三维拟合结果能够较好描述致密砂岩裂隙结构与孔隙度、应力的关联,可为实际地震勘探中预测储层裂缝性质提供基础依据.     

岩石润湿性的核磁共振表征方法与初步实验结果

随着石油勘探开发领域的不断扩大,某些复杂油气藏尤其是致密油气的岩石物理响应,受岩石润湿性变化的影响越来越明显,影响油气藏的评价以及后续勘探开发,识别和评价岩石润湿性成为重要的研究课题.核磁共振弛豫可以有效表征多孔介质孔隙及其流体分布,特别是通过T₁-T₂弛豫图谱能够获得流体分子与孔隙表面相互作用的信息,进而为孔隙表面润湿性质的判断提供了可能性.本文首先讨论了T₁-T₂弛豫谱表征孔隙介质润湿强度的理论基础,然后,采用一阶近似方法对孔隙表面流体分子的核磁共振弛豫分布进行正演模拟,建立T₁/T₂比值法判别孔隙介质润湿性的基本方法.最后,选取玻璃珠和天然砂岩样品进行初步实验,验证方法的合理性.结果表明,当岩石饱和双相流体时,润湿相流体T₁/T₂值高于非润湿相流体,通过观察不同饱和度状态T₁-T₂二维图谱的变化,能够判断岩石的润湿性.本文的理论分析与初步实验结果为岩石润湿性研究提供了新的手段,对核磁共振测井探测储层润湿性也具有一定的应用价值.     

Structure of residual oil as a function of wettability using pore-network modelling

In the water flooding of mixed-wet porous media, oil may drain down to relatively low residual oil saturations (S_or). Various studies have indicated that such low saturations can only be reached when oil layers in pore corners are included in the pore-scale modelling. These processes within a macroscopic porous medium can be modelled at the pore-scale by incorporating the fundamental physics of capillary dominated displacement within idealised pore network models. Recently, the authors have developed thermodynamic criteria for oil layer existence in pores with non-uniform wettability which takes as input geometrically and topologically representative networks, to calculate realistic S_or values for mixed-wet and oil-wet sandstones [16, 21]. This previous work is developed in this paper to include (i) the visualisation of the 3D structure of this residual oil, and (ii) a statistical analysis of this “residual/remaining” oil. Both the visualisation and the statistical analysis are done under a wide range of wettability conditions, which is reported for the first time in this paper.The structure of residual oil for strongly water wet systems is well known (where residual = remaining oil) and our model agrees with this but this structure changes radically for mixed wet systems (where residual ≠ remaining) and this has not yet been visualised experimentally. We find that for more water-wet systems high final residual oil saturations are reached at relatively small amounts of water injected and this oil is present in the pores as bulk oil. On the other hand, for more oil-wet systems we find a slow decrease of the amount of remaining oil with increasing amounts of injected water. During the process, the remaining connectivity of the oil phase is increasingly provided by oil layers only, hence the slow drainage. The final residual oil saturation, only reached in the theoretical limit of an infinite amount of injected water, is almost entirely contained in large number of (relatively low volume) oil layers, which are present in pores of most radius sizes.     

Diagenetic fluids evolution and genetic mechanism of tight sandstone gas reservoirs in Upper Triassic Xujiahe Formation in Sichuan Basin,China

The reservoirs of the Upper Triassic Xujiahe Formation in Sichuan Basin have the characteristics of low compositional maturity, low contents of cements and medium textural maturity. The general physical properties of the reservoirs are poor, with low porosity and low permeability, and there are only a few reservoirs with medium porosity and low permeability in local areas. Based on the diagenetic mineral association, a diagenetic sequence of cements is established: early calcites (or micrite siderites) →first quartz overgrowth→chlorite coatings→dissolution of feldspars and debris→chlorite linings→ second quartz overgrowth (quartz widen or filled in remain intergranular pores and solution pores)→dissolution→third quartz overgrowth (quartz filled in intergranular and intragranular solution pores)→intergrowth (ferro) calcites→dolomites→ferro (calcites) dolomites→later dissolution→veins of quartz and calcites formation. Mechanical compaction is the main factor in making the reservoirs tight in the basin, followed by the second and third quartz overgrowth. In a long-term closed system, only feld-spars and some lithic fragments are dissolved by diagenetic fluids, while intergranular cements such as quartz and calcit are not dissolved and thus have little influence on the porosity of the Xujiahe Formation. This is the third factor that may have kept the sandstones of Xujiahe Formation tight finally. The hydrocarbon was extensively generated from organic materials after the second quartz overgrowth, and selectively entered favorable reservoirs to form tight sandstone gas reservoirs.     

低渗透复杂润湿性储层电阻率实验及导电机理研究

低渗透岩性油气藏发育的黏土膜吸附原油造成了储层亲油,电阻率异常高,高阻油水层、水层的存在给储层流体性质识别带来了很大挑战.为了明确不同润湿性储层的电阻率响应特征以及微观导电机理,本文选取了鄂尔多斯盆地西部三叠系延长组长8段的岩心,模拟了油驱水、老化和水驱油过程,并测量了岩心薄片洗油后的接触角.实验结果表明,洗油后异常高阻岩心已表现为不完全亲水,然而,其测量的胶结指数m与正常电阻率岩心相差很小.油驱水至束缚水时,正常电阻率岩心的电阻增大率I_r与含水饱和度Sw的关系在双对数坐标下基本表现为直线的关系,而异常高阻岩心则表现为明显的凸曲线特征.且老化过程前后,异常高阻岩心的电阻率基本不变.结合对异常高阻岩心不同状态下的核磁共振T_2谱的分析,表明在油驱水过程中,岩石的润湿性已经向亲油方向发生转变,老化过程对润湿性的改变影响很小.水驱油至残余油时,异常高阻岩心的I_r-S_w曲线表现为近似直线特征,反映出水驱油过程中岩石的导电结构并未发生改变.基于实验结果的分析与讨论,明确了一种适用于低渗透复杂润湿性储层的成藏模式及其导电机理,说明了高阻水层主要是亲油润湿性条件下的连续导电路径遭到破坏造成的.     

泥质砂岩中接触胶结泥质定量估算及对砂岩弹性的影响

在泥质砂岩的岩石物理建模中,明确泥质砂岩中泥质胶结物的接触类型及其含量对正确认识泥质的胶结作用对泥质砂岩声速的影响以及合理地建立岩石物理模型至关重要.现阶段,尚未有实验室定量估算胶结泥质的方法,导致应用胶结砂岩理论模型预测胶结砂岩地层的声速时往往由于胶结物含量被高估从而导致预测声速结果偏高.本文通过观察铸体薄片中泥质与颗粒之间的接触关系和相对分布提出了一种区分胶结泥质和分散泥质的方法:与两个或两个以上颗粒接触的连续分布的泥质为胶结泥质;与一个颗粒接触或者不与颗粒接触的泥质为分散泥质.基于这一准则,本文基于像素拾取法估算了人造泥质砂岩的胶结泥质含量,并将胶结泥质含量作为胶结砂岩模型的输入参数优化CCT模型.对比原始模型,本文方法声速误差下降了20%,预测准确度显著提高.本文方法适用于弱胶结地层的岩石物理建模,能够准确的预测声速以结合地震和测井资料识别有利储层,定量评价储层参数.     

致密砂岩储层CO2驱油特征的核磁共振实验研究

利用核磁共振技术对致密砂岩储层不同渗透率级别基质岩心和裂缝基质岩心不同驱替压力下CO2驱油特征进行了研究,简述核磁共振原理及实验方法。表明:致密砂岩储层特低、超低渗透基质岩心在初始CO2驱替压力下,岩心毛细孔隙和微毛细孔隙区间的油不同程度被采出,随着CO2驱替压力增大,特低、超低渗透基质岩心毛细孔隙区间油的采出程度不断增加且累积采出程度不同。裂缝致密砂岩储层岩心,裂缝和毛细孔隙区间的油在初始CO2驱替压力下,岩心裂缝中的油及毛细孔隙中的部分油被驱替出来,CO2驱替压力提高毛细孔隙、微毛细区间油的采出程度和累积采收程度较小。致密砂岩储层特低、超低渗透基质岩心和裂缝致密砂岩储层岩心,随着CO2驱替压力增大毛细孔隙区间的部分剩余油成正比增加进入到微毛细孔隙区间改变储层剩余油分布。核磁共振技术能够深入研究致密砂岩储层CO2不同驱替压力阶段,岩心裂缝、毛细孔隙区间、微毛细孔隙区间油的采出程度和剩余油分布情况,对于研究致密砂岩储层微观驱油机理具有较重要的价值。      

Sandstone diagenesis of the Lower Cretaceous Sindong Group, Gyeongsang Basin, southeastern Korea: Implications for compositional and paleoenvironmental controls

Abstract The Gyeongsang Basin is a non‐marine sedimentary basin formed by extensional tectonism during the Early Cretaceous in the southeastern Korean Peninsula. The sediment fill starts with the Sindong Group distributed along the western margin of the basin. It consists of three lithostratigraphic units: the Nakdong (alluvial fan), Hasandong (fluvial) and Jinju (lacustrine) formations with decreasing age. Sindong Group sandstones are classified into four petrofacies (PF) based on their detrital composition: PF‐A consists of the lower Nakdong Formation with average Q₇₃F₁₂R₁₅; PF‐B the upper Nakdong and lower Hasandong formations with Q₆₆F₁₅R₁₈; PF‐C the middle Hasandong to middle Jinju formations with Q₄₉F₂₉R₂₂; and PF‐D the upper Jinju Formation with Q₂₆F₃₄R₄₁. The variations of detrital composition influenced the diagenetic mineral assemblage in the Sindong Group sandstones. Illite and dolomite/ankerite are important diagenetic minerals in PF‐A and PF‐B, whereas calcite and chlorite are dominant diagenetic minerals in PF‐C and PF‐D. Most of the diagenetic minerals can be divided into early and late diagenetic stages of formation. Early diagenetic calcites occur mostly in PF‐C, probably controlled by arid to semiarid climatic conditions during the sandstone deposition, no early calcite being found in PF‐A and PF‐B. Late‐stage calcites are present in all Sindong Group sandstones. The calcium ions may have been derived from shale diagenesis and dissolution of early stage calcites in the Hasandong and Jinju sandstones. Illite, the only diagenetic clay mineral in PF‐A and lower PF‐B, is inferred to be a product of kaolinite transformation during deep burial, and the former presence of kaolinite is inferred from the humid paleoclimatic conditions during the deposition of the Nakdong Formation. Chlorites in PF‐C and PF‐D are interpreted to be the products of transformation of smectitic clay or of precipitation from alkaline pore water under arid to semiarid climatic conditions. The occurrence of late‐stage diagenetic minerals largely depended on the distribution of early diagenetic minerals, which was controlled initially by the sediment composition and paleoclimate.     

Distribution characteristics and petroleum geological significance of the Silurian asphaltic sandstones in Tarim Basin

The Tarim Basin is a typical superimposed basin in which there have occurred multiphase adjustment and destruction of the reservoirs. The widely distributed asphaltic sandstones of the Silurian are the very product after destruction of the reservoirs. Studies show that the Silurian asphaltic sandstones distributed in both the middle and western parts on the basin are controlled chiefly by the Caledonian oil source area and by the Tazhong, Tabei and Bachu uplifts, whereas the distribution of the asphaltic sandstones on local structural belts is controlled by the reservoir's sedimentary system. Vertically, most of the asphaltic sandstones are under the regional caprock of red mudstones and the upper sandstone section of compact lithology. Due to the difference of hydrocarbon destruction in the early stage and the influence of hydrocarbon recharge in the late stage, the asphaltic sandstones and oil-bearing sandstones in the Tazhong area can be vertically divided into the upper and lower sections and they have an interactive distribution relationship as well. Asphaltic sandstones exist not only in intergranular pores but also inside the grains of sand and between the crevices, proving the destruction of early reservoirs due to uplifting. The existence of asphaltic sandstones over a large area reveals that the large-scale migration and accumulation and the subsequent destruction of hydrocarbons in the Craton area. The destruction caused a loss of the reserve resources of the Palaeozoic amounting to nearly 13.3 billion tons. Asphaltic sandstones formed after the destruction of oil and gas may serve as an effective caprock which is beneficial to accumulation of hydrocarbons and formation of the pool sealed by asphaltic sandstones in the later stage. The destruction of the early Silurian hydrocarbons depends on the stratigraphic burial depth. The deep part under the northern slope of Tazhong is an area favorable to search of undestroyed Silurian oil reservoirs.     

莫西庄地区三工河组二段储层特征评价

三工河组二段砂体为莫西庄地区的主要含油储层,分布相对较稳定.三工河组二段含油砂体分为三工河组二段一砂体和三工河组二段一砂体两套砂体,分布稳定.文章通过分析沉积特征、物性特征、孔隙类型和孔喉特征,对这两套含油储层进行了系统的评价,认为J1s12含油储层属中—差型储层,J1s12含油储层为中等储层.在综合评价的基础上,通过地震反演,预测了莫西庄地区主力含油砂体厚度的分布.     

含流体致密砂岩的纵波频散及衰减:基于双重双重孔隙结构模型描述的特征分析

致密砂岩普遍具有低孔、低渗及微裂缝发育的地质特征,并且呈现出很强的非均匀性.致密砂岩储层与常规砂岩储层比较,具有明显的岩石物理性质、渗流力学性质方面的差异.致密砂岩内部的非均匀性对弹性波频散、衰减有显著影响,其中包括孔隙结构的非均匀性,即岩石内部孔隙参数的不均一性,以及孔隙内部不相混溶流体的非均匀分布;此外,非均匀性的尺度也决定了波出现显著频散与衰减的频段.综合考虑致密砂岩孔隙结构非均匀性及流体斑块状饱和的非均匀性,本文采用双双重孔隙介质结构模拟了致密砂岩的弹性波响应,分析了同时具备两类非均质性岩石中的波传播特征.调查分析了两组分别来自中国鄂尔多斯盆地苏里格气田及四川盆地广安气田的不同类型致密砂岩储层的岩芯超声波实验数据,给出了岩石样本的弹性波速度频散与衰减曲线.结果显示理论模型预测结果与完全饱和、部分饱和岩石的实验数据吻合良好.对两个地区致密砂岩岩芯数据进行对比分析,苏里格致密砂岩样本总体上比广安致密砂岩渗透率高,在各孔隙度范围内,特征模拟显示苏里格样本的裂隙尺寸明显大于广安样本.广安致密砂岩在低孔隙度范围内发育了更多、更小的颗粒裂隙/接触.致密砂岩的速度频散与衰减结果受流体黏度、晶体破裂及流体斑块状饱和的共同影响.此外,孔隙度越大,部分饱和岩石中斑块状饱和机制对总衰减的贡献越低,与之相对,结构非均质性所占的比重则有所增强.     

Effects of wettability and pore-level displacement on hydrocarbon trapping

We use a three-dimensional mixed-wet random network model representing Berea sandstone to extend our previous work on relative permeability hysteresis during water-alternating-gas (WAG) injection cycles [Suicmez, VS, Piri, M, Blunt, MJ, 2007, Pore-scale simulation of water alternate gas injection, Transport Porous Med 66(3), 259–86]. We compute the trapped hydrocarbon saturation for tertiary water-flooding, which is water injection into different initial gas saturations, S_gi, established by secondary gas injection after primary drainage. Tertiary water-flooding is continued until all the gas and oil is trapped. We study four different wettability conditions: water-wet, weakly water-wet, weakly oil-wet and oil-wet. We demonstrate that the amounts of oil and gas that are trapped show surprising trends with wettability that cannot be captured using previously developed empirical trapping models. We show that the amount of oil that is trapped by water in the presence of gas increases as the medium becomes more oil-wet, which is opposite from that seen for two-phase flow. It is only through a careful analysis of displacement statistics and fluid configurations that these results can be explained. This illustrates the need to have detailed models of the displacement processes that represent the three-phase displacement physics as carefully as possible. Further work is needed to explore the full range of behavior as a function of wettability and displacement path.     

Compressibility of porous rocks: Part II. New relationships

Pore volume compressibility is one of the physical properties of a reservoir that must be specified in many reservoir-engineering calculations. The main objective of this work is to provide new general formulas for pore volume compressibility versus porosity on the basis of measured compressibilities of some limestone and sandstone rocks in a wide range of porosity values and of varied type; the measurements were performed on Hungarian reservoir rock samples. The obtained laboratory results were compared with the published correlations of consolidated limestone samples as well with values for friable and strongly consolidated sandstones. The validity of using compressibility data from the literature was investigated. The measured data showed poor agreement with the published correlations. The first approach to find better and more accurate rock compressibility correlations consisted of combing all the data available from the literature, using the same formula of Horne’s type. However, this attempt did not give satisfying fitting results. In the next step, by using twelve different fitting formulas, and other comprehensive nonlinear fitting regression programs, new rock compressibility correlations for limestone and sandstone rocks, with better goodness of fit, were developed. These new correlations can be generalized and used for most of oil and gas reservoirs.     

含流体砂岩地震波频散实验研究

为了研究孔隙流体对不同渗透率岩石地震波速度的影响,在实验室利用跨频带岩石弹性参数测试系统得到了应变幅值10-6的2~2000Hz频段下的地震波速度和1 MHz频率下的超声波速度,利用差分共振声谱法得到了频率600Hz岩石干燥和完全饱水情况下岩石声学参数.实验表明,在低饱和度下,致密砂岩在地震和超声频段下没有明显的频散;在高饱和度下纵波速度的频散变得明显.从干燥到完全水饱和条件,不同频率测量的致密砂岩的体积模量随岩石孔隙度增高而降低,且体积模量的变化量受岩石微观孔隙结构的影响较大.高孔、高渗砂岩无论在低含水度下还是在高含水饱和度下频散微弱,并且在地震频段下围压对于岩石纵横波速度的影响要大于频率的影响.高孔、高渗砂岩和致密砂岩不同含水饱和度下的频散差异可应用于储层预测,油气检测等方面,同时该研究可以更好地帮助理解岩石的黏弹性行为,促进岩石物理频散理论的发展,提高地震解释的精度.     

基于储层砂岩微观孔隙结构特征的弹性波频散响应分析

储层砂岩微观孔隙结构特征不仅影响干燥岩石的弹性波传播速度,也决定了岩石介质中与流体流动相关的速度频散与衰减作用.依据储层砂岩微观结构特征及速度随有效压力变化的非线性特征,将其孔隙体系理想化为不同形状的硬孔隙(纵横比α0.01)与软孔隙(纵横比α0.01)的组合(双孔隙结构).基于孔弹性理论,给出软孔隙最小初始纵横比值(一定压力下所有未闭合软孔隙在零压力时的纵横比最小值)的解析表达式,并在此基础上利用岩石速度-压力实验观测结果给出求取介质中两类孔隙纵横比及其含量分布特征的方法.通过逐步迭代加入软孔隙的方法对基于特征纵横比的"喷射流"(squirt fluid)模型进行了扩展,以考虑复杂孔隙分布特征对岩石喷射流作用的影响及其可能引起的速度频散特征.相较于典型的喷射流作用速度频散模式,对于岩石中软孔隙纵横比及其对应含量在较宽的范围呈谱分布的一般情况,其速度频散曲线不存在明显的低频段和中间频段,速度随频率的增大呈递增趋势直至高频极限.这说明即使在地震频段,微观尺度下的喷射流作用仍起一定作用,同样会造成流体饱和岩石介质的地震速度与Gassmann方程预测结果有不可忽略的差异.本文是对现有喷射流模型的重要补充,也为利用实验数据建立不同频段间岩石弹性波传播速度的可能联系提供了理论依据.     

Acoustic and petrophysical relationships in low-shale sandstone reservoir rocks

This paper describes the measurements of the acoustic and petrophysical properties of two suites of low‐shale sandstone samples from North Sea hydrocarbon reservoirs, under simulated reservoir conditions. The acoustic velocities and quality factors of the samples, saturated with different pore fluids (brine, dead oil and kerosene), were measured at a frequency of about 0.8 MHz and over a range of pressures from 5 MPa to 40 MPa. The compressional‐wave velocity is strongly correlated with the shear‐wave velocity in this suite of rocks. The ratio V_P/V_S varies significantly with change of both pore‐fluid type and differential pressure, confirming the usefulness of this parameter for seismic monitoring of producing reservoirs. The results of quality factor measurements were compared with predictions from Biot‐flow and squirt‐flow loss mechanisms. The results suggested that the dominating loss in these samples is due to squirt‐flow of fluid between the pores of various geometries. The contribution of the Biot‐flow loss mechanism to the total loss is negligible. The compressional‐wave quality factor was shown to be inversely correlated with rock permeability, suggesting the possibility of using attenuation as a permeability indicator tool in low‐shale, high‐porosity sandstone reservoirs.     

核磁共振测井探测岩石内部磁场梯度的方法

岩石内部磁场梯度对核磁共振测井横向弛豫T₂分布有较大的影响.本文提出了一种利用自旋回波脉冲序列探测岩石内部磁场梯度的二维核磁共振方法,发展了相应的反演方法,得到了含顺磁性物质的饱和水砂岩和泥质砂岩的内部磁场梯度分布规律.结果表明,随顺磁物质含量的增加,岩石内部磁场梯度增大.含顺磁物质的饱和水砂岩颗粒均匀,不含粘土矿物,内部磁场梯度呈单峰分布特征.含绿泥石粘土矿物的饱和水泥质砂岩,T₂分布呈双峰特征,束缚水峰明显,小孔短T₂对应的梯度值大于大孔长T₂对应的梯度值.当绿泥石含量小于15%时,随绿泥石含量的增加,对应束缚水峰的短T₂组分明显增多,T₂分布展宽;当绿泥石含量大于15%以后,较大的岩石内部磁场梯度使短弛豫信息衰减迅速,表现出随绿泥石含量的增加,短T₂组分减少,T₂分布变窄.