Moment tensor inversion and source rupture process of the September 27, 2003 M S=7.9 earthquake occurred in the border area of China, Russia and Mongolia

We conducted moment tensor inversion and studied source rupture process for M _S=7.9 earthquake occurred in the border area of China, Russia and Mongolia on September 27 2003, by using digital teleseismic P-wave seismograms recorded by long-period seismograph stations of the global seismic network. Considering the aftershock distribution and the tectonic settings around the epicentral area, we propose that the M _S=7.9 earthquake occurred on a fault plane with the strike of 127°, the dip of 79° and the rake of 171°. The rupture process inversion result of M _S=7.9 earthquake shows that the total rupture duration is about 37 s, the scalar moment tensor is M ₀=0.97×10²⁰ N·m. Rupture mainly occurred on the shallow area with 110 km long and 30 km wide, the location in which the rupture initiated is not where the main rupture took place, and the area with slip greater than 0.5 m basically lies within 35 km deep middle-crust under the earth surface. The maximum static slip is 3.6 m. There are two distinct areas with slip larger than 2.0 m. We noticed that when the rupture propagated towards northwest and closed to the area around the M _S=7.3 hypocenter, the slip decreased rapidly, which may indicate that the rupture process was stopped by barriers. The consistence of spatial distribution of slip on the fault plane with the distribution of aftershocks also supports that the rupture is a heterogeneous process owing to the presence of barriers.     

Iterative deconvolution of complex body waves from great earthquakes—the Tokachi-Oki earthquake of 1968

A method of body-wave inversion is developed in an attempt to extract the information about asperities or barriers in a fault zone. A sequence of point sources, each being characterized with the seismic moment, the onset time and the location, are iteratively derived from observed records at multi-stations, where the two-dimensional extent of the source location is taken into account. A modification is made of the iterative method of Kikuchi and Kanamori on the formulation of inversion procedure to facilitate the computation.Using this method, we analyse long period P waves of the Tokachi-Oki earthquake of 1968 (M_w = 8.2) and obtain several significant subevents with time durations of ～ 10 s. Their spatio-temporal distribution shows that the rupture process consists of three characteristic stages: (A) a stage of introductory rupture, (B) a stage of main rupture and (C) a stage of aftershocks. The main rupture takes place in the form of clustering around a few sites of the fault plane. The largest subevent occurs in the northwestern corner. The stress drop associated with this event is estimated to be ～ 200 bars, one order of magnitude higher than the stress drop averaged over the entire fault plane. The sum of the seismic moments of the individual subevents amounts to 2.3 × 10²⁸ dyn. cm which approximately coincides with the one estimated from the analysis of long-period surface waves. This implies that the source of the Tokachi-Oki earthquake consists of several major subevents with time durations of ～ 10 s in addition to other minor subevents.     

Iterative deconvolution of teleseismic P waves from the Thessaloniki (N. Greece) earthquake of June 20, 1978

Teleseismic long-period P waves from the June 20, 1978, Thessaloniki (N. Greece) earthquake (M _s=6.4) were modeled in an attempt to extract information about asperities or barriers on the fault plane. The analysis is based on the inversion method of complex P waves developed by Kikuchi and Kanamori (1982). A far-field source time function with a rise time of 2 sec and a process time of 5 sec is inferred, corresponding to a source dimension of about 10 km when a rupture velocity of 2 km/sec is assumed.The source depth of this shock, estimated by matching synthetic seismograms to observations, is found to be 8 km. The sum of the seismic moments of the individual subevents amounts to 3.3×10²⁵ dyn-cm.     

Moment tensor inversion and source rupture process of the September 27, 2003 <Emphasis Type="Italic">M</Emphasis><Subscript>S</Subscript>=7.9 earthquake occurred in the border area of China,Russia and Mongolia

We conducted moment tensor inversion and studied source rupture process for M _S=7.9 earthquake occurred in the border area of China, Russia and Mongolia on September 27 2003, by using digital teleseismic P-wave seismograms recorded by long-period seismograph stations of the global seismic network. Considering the aftershock distribution and the tectonic settings around the epicentral area, we propose that the M _S=7.9 earthquake occurred on a fault plane with the strike of 127°, the dip of 79° and the rake of 171°. The rupture process inversion result of M _S=7.9 earthquake shows that the total rupture duration is about 37 s, the scalar moment tensor is M ₀=0.97×10²⁰ N·m. Rupture mainly occurred on the shallow area with 110 km long and 30 km wide, the location in which the rupture initiated is not where the main rupture took place, and the area with slip greater than 0.5 m basically lies within 35 km deep middle-crust under the earth surface. The maximum static slip is 3.6 m. There are two distinct areas with slip larger than 2.0 m. We noticed that when the rupture propagated towards northwest and closed to the area around the M _S=7.3 hypocenter, the slip decreased rapidly, which may indicate that the rupture process was stopped by barriers. The consistence of spatial distribution of slip on the fault plane with the distribution of aftershocks also supports that the rupture is a heterogeneous process owing to the presence of barriers.     

Rupture behavior and deformation localization of the Kunlunshan earthquake (<Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">w</Emphasis></Subscript>7.8) and their tectonic implications

Earthquake surface rupture is the result of transformation from crustal elastic strain accumulation to permanent tectonic deformation. The surface rupture zone produced by the 2001 Kunlunshan earthquake (M _w 7.8) on the Kusaihu segment of the Kunlun fault extends over 426 km. It consists of three relatively independent surface rupture sections: the western strike-slip section, the middle transtensional section and the eastern strike-slip section. Hence this implies that the Kunlunshan earthquake is composed of three earthquake rupturing events, i.e. the M _w =6.8, M _w =6.2 and M _w ⩽=7.8 events, respectively. The M _w =7.8 earthquake, along the eastern section, is the main shock of the Kunlunshan earthquake, further decomposed into four rupturing subevents. Field measurements indicate that the width of a single surface break on different sections ranges from several meters to 15 m, with a maximum value of less than 30 m. The width of the surface rupture zone that consists of en echelon breaks depends on its geometric structures, especially the stepover width of the secondary surface rupture zones in en echelon, displaying a basic feature of deformation localization. Consistency between the Quaternary geologic slip rate, the GPS-monitored strain rate and the localization of the surface ruptures of the 2001 Kunlunshan earthquake may indicate that the tectonic deformation between the Bayan Har block and Qilian-Qaidam block in the northern Tibetan Plateau is characterized by strike-slip faulting along the limited width of the Kunlun fault, while the blocks themselves on both sides of the Kunlun fault are characterized by block motion. The localization of earthquake surface rupture zone is of great significance to determine the width of the fault-surface-rupture hazard zone, along which direct destruction will be caused by co-seismic surface rupturing along a strike-slip fault, that should be considered before the major engineering project, residental buildings and life line construction. Supported by the National Natural Science Foundation of China (Grant No. 40474037) and the National Basic Research Program of China (Grant No. 2004CB418401)     

Sensitivity of the strong ground motion time histories to a finite source model: A case study for the January 12, 2010 Haiti earthquake (Mw=7.0)

We analyze the waveforms generated by the January 12, 2010 Haiti earthquake (M_w=7.0) for its source characteristics. A 60 to 25 km source model is retrieved by the Kikuchi and Kanamori finite source inversion technique that uses broadband teleseismic body wave records. The derived rupture model points out unilateral rupture propagation commenced at the eastern side of the fault plane where the major seismic moment release occurred. The rupture front propagated westward and terminated at a site where the largest aftershocks occurred. Our estimates yield a seismic moment of M_o=8.17×10¹⁹ N m released on a 60 km-long fault plane. A patch at the eastern side of the ruptured fault plane inferred as a region of maximum moment release.     

Source mechanism of the 22/11/1995 Gulf of Aqaba earthquake and its aftershock sequence

The Gulf of Aqaba earthquake occurred on 22/11/1995 with M _W = 7.2 and was the largest event to occur along the Dead Sea Transform in at least a century. We determined the source mechanism of the event based on the inversion of the P and SH waveforms observed by teleseismic stations. Our solution consists of 2 similar subevents, where the first exhibits a left-lateral strike-slip motion with a normal component and the second subevent shows an almost pure left-lateral strike-slip motion along the gulf major fault system. The total seismic moment is 7.7 × 10²⁶ dyne-cm, with source duration of 15 seconds. The aftershock sequence was recorded by the regional broad band stations BGIO and JER, of the Israel Seismic Network, and KEG, of the MEDNET regional network for earthquakeswith M _W > 4.0. Aftershock epicenter seems to cluster mainly in the Eilat basin and the Aragonese basin. The dominant mechanism indicates left-lateral strike slip motion along the gulf trend, similar to the mainshock.     

Tempo-spatial rupture process of the 1997 Mani, Xizang (Tibet), China earthquake of M S=7.9

An earthquake of M _S=7.4 occurred in Mani, Xizang (Tibet), China on November 8, 1997. The moment tensor of this earthquake was inverted using the long period body waveform data from China Digital Seismograph Network (CDSN). The apparent source time functions (ASTFs) were retrieved from P and S waves, respectively, using the deconvolution technique in frequency domain, and the tempo-spatial rupture process on the fault plane was imaged by inverting the azimuth dependent ASTFs from different stations. The result of the moment tensor inversion indicates that the P and T axes of earthquake-generating stress field were nearly horizontal, with the P axis in the NNE direction (29°), the T axis in the SEE direction (122°) and that the NEE-SWW striking nodal plane and NNW-SSE striking nodal plane are mainly left-lateral and right-lateral strike-slip, respectively; that this earthquake had a scalar seismic moment of 3.4×10²⁰ N·m, and a moment magnitude of M _W=7.6. Taking the aftershock distribution into account, we proposed that the earthquake rupture occurred in the fault plane with the strike of 250°, the dip of 88° and the rake of 19°. On the basis of the result of the moment tensor inversion, the theoretical seismograms were synthesized, and then the ASTFs were retrieved by deconvoving the synthetic seismograms from the observed seismograms. The ASTFs retrieved from the P and S waves of different stations identically suggested that this earthquake was of a simple time history, whose ASTF can be approximated with a sine function with the half period of about 10 s. Inverting the azimuth dependent ASTFs from P and S waveforms led to the image showing the tempo-spatial distribution of the rupture on the fault plane. From the "remembering" snap-shots, the rupture initiated at the western end of the fault, and then propagated eastward and downward, indicating an overall unilateral rupture. However, the slip distribution is non-uniform, being made up of three sub-areas, one in the western end, about 10 km deep ("western area"); another about 55 km away from the western end and about 35 km deep ("eastern area"); the third about 30 km away from the western end and around 40 km deep ("central area"). The total rupture area was around 70 km long and 60 km wide. From the "forgetting" snap-shots, the rupturing appeared quite complex, with the slip occurring in different position at different time, and the earthquake being of the characteristics of "healing pulse". Another point we have to stress is that the locations in which the rupture initiated and terminated were not where the main rupture took place. Eventually, the static slip distribution was calculated, and the largest slip values of the three sub-areas were 956 cm, 743 cm and 1 060 cm, for the western, eastern and central areas, respectively. From the slip distribution, the rupture mainly distributed in the fault about 70 km eastern to the epicenter; from the aftershock distribution, however, the aftershocks were very sparse in the west to the epicenter while densely clustered in the east to the epicenter. It indicated that the Mani M _S=7.9 earthquake was resulted from the nearly eastward extension of the NEE-SWW to nearly E-W striking fault in the northwestern Tibetan plateau. Contribution No. 99FE2016, Institute of Geophysics, China Seismological Bureau. This work is supported by SSTCC Climb Project 95-S-05 and NSFDYS 49725410.     

Inversion of long-period body-wave data for the source process of the Gonghe, Qinghai, China earthquake

Long period body waves data recorded by the China Digital Seismograph Network (CDSN) are inverted for the seismic moment tensors of the April 26, 1990, Gonghe, QinghaiM _S=6.9 earthquake and itsM _S=5.0 after-shock occurred on May 7, 1990. In the inversion, the generalized reflection-transmission coefficient matrix method is used to generate Green’s function. From the inversion it is obtained that the rupture process of theM _S=5.0 aftershock is relatively simple, and that of the main shock is rather complex. There are at least two events during main shock rupture process with an interval about 35 seconds. The focal mechanisms of two events are roughly the same as that of the aftershock, all of them were mainly reverse dip-slipping faulting with minor left-lateral strike-slip motion. These results indicate that the Gonghe earthquake was the result of the farther extension of one NWW-SEE striking buried fault on the southern margin of Gonghe basin from shallower depth to deeper depth and from NW to SE under the action of a nearly horizontal NE direction compressive stress. Contribution No. 95A0111, Institute of Geophysics, SSB, China.     

Inversion of near-field waveform data for earthquake source rupture process ( II ): Inversion of Chi Chi earthquake source, 20 September, 1999, Taiwan

The new inversion algorithm developed based on the recent progress in the nonlinear programming study by us is used to invert the earthquake source process of Chi Chi earthquake M _w7.6, 20 Semptember, 1999, Taiwan. A curve fault model is constructed in our inversion to make the fault model close to the real rupturing fault to reduce the influence from the discrepancy between the constructed fault model and the real rupturing fault. The results show that (1) the rupture process of the Chi Chi earthquake source lasted about 32 seconds and the main faulting occurred between 6th to 21st second after the start of the ruptures and the high slip area were mainly located at the northern segment of the fault. (2) The slip was dominated by thrust faulting. The average rake angle was 64.5°, which was very consistent with those inverted by USGS, Harvard and CWB (Central Weather Bureau of Taiwan). The amount of the moment inverted in this paper was 7.76×10²⁰ NM, which was a slightly bigger than those inverted by USGS and Harvard. (3) A clear nucleation step existed in the source faulting process and it lasted about 6 seconds. The moment release rate accelerated obviously at the end of the nucleation step. The faulting started from the southern segment and mainly occurred at the northern segment after 10 seconds. At the end of this paper, we analyzed the reliability of the inversion result via comparing with the GPS observations and discussed its scientific signification.     

Review of the source characteristics of the Great Sumatra–Andaman Islands earthquake of 2004

The December 26, 2004 Sumatra–Andaman Island earthquake, which ruptured the Sunda Trench subduction zone, is one of the three largest earthquakes to occur since global monitoring began in the 1890s. Its seismic moment was M ₀ = 1.00 × 10²³–1.15 × 10²³ Nm, corresponding to a moment-magnitude of M _w = 9.3. The rupture propagated from south to north, with the southerly part of fault rupturing at a speed of 2.8 km/s. Rupture propagation appears to have slowed in the northern section, possibly to ∼2.1 km/s, although published estimates have considerable scatter. The average slip is ∼5 m along a shallowly dipping (8°), N31°W striking thrust fault. The majority of slip and moment release appears to have been concentrated in the southern part of the rupture zone, where slip locally exceeded 30 m. Stress loading from this earthquake caused the section of the plate boundary immediately to the south to rupture in a second, somewhat smaller earthquake. This second earthquake occurred on March 28, 2005 and had a moment-magnitude of M _w = 8.5.     

InSAR数据约束的2021年5月21日云南漾濞MS6.4地震发震构造研究

运用Sentinel-1A卫星数据和D-InSAR技术,获取2021-05-21云南漾濞M_S6.4地震的同震形变场。结果显示,漾濞地震同震形变场长轴近NW展布升降轨形变场符号相反,视线向最大沉降量和抬升量为0.1 m。InSAR同震形变场反演的滑动分布主要集中在沿走向2～12 km,倾向1～9 km的范围内,最大滑动量0.35 m,发震断层长9.8 km、宽4 km,滑动量主要集中在地下3～6 km范围内,滑动角-146.7°。同震位移场及滑动分布模型反映本次地震为发震断层的右旋走滑事件,地震破裂未达到地表。断层模型反演结果显示,矩震级为M_W6.1,发震断层以北西走向右旋走滑运动为主,初步认为本次M_W6.1地震发震断裂可能是一条NW向的维西—乔后断裂西侧的隐伏次生断裂。     

Source process of M_s6.4 earthquake in Ning’er, Yunnan in 2007

The moment tensor solution, source time function and spatial-temporal rupture process of the MS6.4 earthquake, which occurred in Ning’er, Yunnan Province, are obtained by inverting the broadband waveform data of 20 global stations. The inverted result shows that the scalar seismic moment is 5.51×1018 Nm, which corresponds to a moment magnitude of MW 6.4. The correspondent best double couple solution results in two nodal planes of strike 152°/dip 54°/rake 166°, and strike 250°/dip 79°/ rake 37°, respectively...     

Investigation of rupture process of the 1999 M =5.4 Xiuyan, Liaoning, earthquake sequence

Conclusions The sequence of the November 29, 1999 Xiuyan, Liaoning, earthquake withM _S=5.4 is relocated, and its rupture process is analyzed. Results are as follows: The rupture extended mainly before the January 12, 2000,M _S=5.1 earthquake. There are two phases of rupture extending: The first phase was before the November 29, 1999,M _S=5.4 earthquake, epicenters were situated within a small region with a dimension of about 5 km, and the focal depth increased. It shows that the rupture mainly extended from shallow part to deep in the vertical direction. The second phase was between theM _S=5.4 earthquake and theM _S=5.1 earthquake, earthquakes migrated along southeast, the focal depth decreased. It indicates that the rupture extended along southeast and from deep to shallow part. Foundation item: The Project of “Mechanism and Prediction of the Strong Continental Earthquake” (95-13-05-04). Contribution No. 01FE2017, Institute of Geophysics, China Seismological Bureau.     

Coseismic deformation of the 2021 MW7.4 Maduo earthquake from joint inversion of InSAR,GPS, and teleseismic data

The M_W7.4 Maduo earthquake occurred on 22 May 2021 at 02:04 CST with a large-expansion surface rupture. This earthquake was located in the Bayan Har block at the eastern Tibetan Plateau, where eight earthquakes of M_S >7.0 have occurred in the past 25 years. Here, we combined interferometric synthetic aperture radar, GPS, and teleseismic data to study the coseismic slip distribution, fault geometry, and dynamic source rupture process of the Maduo earthquake. We found that the overall coseismic deformation field of the Maduo earthquake is distributed in the NWW-SEE direction along 285°. There was slight bending at the western end and two branches at the eastern end. The maximum slip is located near the eastern bending area on the northern branch of the fault system. The rupture nucleated on the Jiangcuo fault and propagated approximately 160 km along-strike in both the NWW and SEE directions. The characteristic source rupture process of the Maduo earthquake is similar to that of the 2010 M_W6.8 Yushu earthquake, indicating that similar earthquakes with large-expansion surface ruptures and small shallow slip deficits can occur on both the internal fault and boundary fault of the Bayan Har block.     

Source parameters of bohai earthquake, July 18, 1969 and yongshan earthquake, May 11, 1974 determined by synthetic seismograms of teleseismic P waves

The source parameters of the Bohai Sea earthquake, July 18, 1969 and Yongshan, Yunnan earthquake, May 11, 1974 were determined by full — wave theory synthetic seismograms of teleseismic P waves. P+pP+sP wereform were calculated with WKBJ approximation and real integral paths. One — dimensional unilateral, finite propagation source was also considered. By trail — and — error in comparing the theoretical seismograms with the observational ones of WWSSN stations, the source parameters were obtained as follow: for Bohai earthquake, φ=195°, δ=85°, λ=65°,M _o=0.9×10¹⁹Nm,L=59.9km.V _R=3.5km/s, ∧ _R =160°; for Yongshan earthquake, φ=240°, δ=80°, ∧=150°,M _o=1.3×10¹⁸Nm,L=48.8km,V _R=3km/s, ∧ _R =−10°, where φ is strike, δ dip angle, λ slip angle,M _o seismic moment,L rupture length,V _R rupture propagation speed. As III type fractures the faulting propagated along the fault planes, and ∧ _R is the angle from the strike to the propagation direction. Yongshan earthquake showed complexity in its focal process, having four sub—ruptures during the first 60 seconds. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,13, 1–8, 1991.     

Source parameters of the Gonghe,Qinghai Province,China,earthquake from inversion of digital broadband waveform data

ＳｏｕｒｃｅｐａｒａｍｅｔｅｒｓｏｆｔｈｅＧｏｎｇｈｅ，ＱｉｎｇｈａｉＰｒｏｖｉｎｃｅ，Ｃｈｉｎａ，ｅａｒｔｈｑｕａｋｅｆｒｏｍｉｎｖｅｒｓｉｏｎｏｆｄｉｇｉｔａｌｂｒｏａｄｂａｎｄｗａｖｅｆｏｒｍｄａｔａＬＩ－ＳＨＥＮＧＸＵ（许立生）ａｎｄＹＵＮ...     

Earthquake probabilities and magnitude distribution ( M ≥6.7) along the Haiyuan fault, northwestern China

In recent years, some researchers have studied the paleoearthquake along the Haiyuan fault and revealed a lot of paleoearthquake events. All available information allows more reliable analysis of earthquake recurrence interval and earthquake rupture patterns along the Haiyuan fault. Based on this paleoseismological information, the recurrence probability and magnitude distribution for M≥6.7 earthquakes in future 100 years along the Haiyuan fault can be obtained through weighted computation by using Poisson and Brownian passage time models and considering different rupture patterns. The result shows that the recurrence probability of M _S≥6.7 earthquakes is about 0.035 in future 100 years along the Haiyuan fault. Foundation item: Joint Seismological Science Foundation of China (103034) and Major Research “Research on Assessment of Seismic Safety” from China Earthquake Administration during the tenth Five-year Plan.     

2022年门源MS6.9和2016年门源MS6.4地震序列比较分析

2022年1月8日青海省海北州门源县发生M_S6.9地震,震中距离2016年1月21日门源M_S6.4地震震中约33km,两次门源地震均发生在冷龙岭断裂附近,但在震源机制、主发震断层破裂过程及地震序列余震活动等方面显著不同。针对两次门源地震序列的比较分析,对研究冷龙岭断裂及其附近区域强震序列和余震衰减特征等具有重要研究意义。通过对比分析2022年门源M_S6.9地震和2016年门源M_S6.4地震余震的时空演化特征,发现二者在震源过程和断层破裂尺度上存在明显差异,前者发震断层破裂充分,震后能量释放充分,余震丰富且震级偏高;而后者发震断层未破裂至地表,余震震级水平偏低。综合分析两次门源地震序列表现出来的差异性,认为其可能与地震发震断层的破裂过程密切相关,且同时受到区域构造环境的影响。     

Source mechanism and source parameters of May 28, 1998 earthquake,Egypt

On May 28, 1998, a moderate size earthquake of mb 5.5 occurred offshore the northwestern part of Egypt (latitude 31.45°N and longitude 27.64°E). It was widely felt in the northern part of Egypt. Being the largest well-recorded event in the area for which seismic data from the global digital network are available, it provides an excellent opportunity to study the tectonic process and present day stress field occurring along the offshore Egyptian coast. The source parameters of this event are determined using three different techniques: modeling of surface wave spectral amplitudes, regional waveform inversion, and teleseismic body waveform inversion. The results show a high-angle reverse fault mechanism generally trending NNW–SSE. The P-axis trends ENE–WSW consistently with the prevailed compression stress along the southeastern Hellenic arc and southwestern part of the Cyprean arc. This unexpected mechanism is most probably related to a positive inversion of the NW trending offshore normal faults and confirms an extension of the back thrusting effects towards the African margin. The estimated focal depth ranges from 22 to 25 km, indicating a lower crustal origin earthquake owing to deep-seated tectonics. The source time function indicates a single source with rise time and total rupture duration of 2 and 5 s, respectively. The seismic moment (M _o) and the moment magnitude (M _w) determined by the three techniques are 1.03 × 10¹⁷ Nm, 5.28; 1.24 × 10¹⁷ Nm, 5.33; and 1.68 × 10¹⁷ Nm, 5.42; respectively. The calculated fault radius, stress drop, and the average dislocation assuming a circular fault model are 7.2 km, 0.63 Mpa, and 0.11 m, respectively.