火山碎屑密度流沉积机制研究——以松辽盆地东南隆起区九台地区白垩系营城组火山碎屑岩为例

火山碎屑密度流是一种危险的火山活动现象,也是一种重要的盆地物源供给方式,对其沉积机制的研究具有灾害预防和油气勘探的双重意义。松辽盆地东南隆起区九台营城煤矿地区白垩系营城组古火山机构保存良好,发育有典型的火山碎屑密度流沉积物。本文在精细刻画火山碎屑岩的岩石结构、沉积构造的基础上,运用薄片观察和沉积物粒度统计的方法,从物质来源、搬运机制和就位方式角度系统地分析了火山碎屑密度流的整个沉积过程,并结合国内外火山学、沉积学的研究进展探讨了不同浓度火山碎屑密度流的沉积机制。研究区内的火山碎屑密度流沉积物可以划分为五种微相:①块状熔结角砾凝灰岩微相;②无序含集块凝灰角砾岩微相;③逆粒序或双粒序角砾凝灰岩微相;④正粒序角砾凝灰岩微相;⑤韵律层理凝灰岩微相。第一种微相具有熔结结构,可能形成于高挥发分岩浆喷发柱的垮塌,火山碎屑密度流的就位温度较高;后四种微相具有正常火山碎屑岩结构,可能形成于火山口的侧向爆炸,火山碎屑密度流的就位温度中等。沉积块状熔结角砾凝灰岩微相的火山碎屑密度流具有黏性碎屑流的流体特征,沉积物整体冻结就位;沉积无序含集块凝灰角砾岩微相和逆粒序或双粒序角砾凝灰岩微相的火山碎屑密度流具有颗粒流的流体特征,沉积物整体冻结就位;沉积正粒序角砾凝灰岩微相和韵律层理凝灰岩微相的火山碎屑密度流具有湍流的流体特征,沉积物连续加积就位。火山碎屑密度流的颗粒浓度是一个连续变量,但流体性质可能会发生突变,稀释的火山碎屑密度流的沉积机制符合下部流动边界模型,稠密的火山碎屑密度流的沉积机制符合层流(碎屑流或颗粒流)模型。     

Bedforms and associated sedimentary structures formed under supercritical water flows over aggrading sand beds

Bedforms and associated sedimentary structures, formed under supercritical water flow over an aggrading sand bed, were studied in a laboratory flume. Although the geometry and hydraulic characteristics of these bedforms (antidunes, chutes-and-pools) are well known, their internal structures are not. The objectives of the study were to: (1) describe the three-dimensional geometry of the sedimentary structures and examine their mode of origin; (2) develop a relationship between the geometries of the sedimentary structures and the formative bedforms and; (3) identify criteria that distinguish these sedimentary structures from similar types, such as hummocky and swaley cross-strata. Sedimentary structures associated with antidunes are primarily lenticular laminasets with concave-upward erosional bases (troughs) in which laminae generally dip upstream or fill the troughs symmetrically. These laminasets are associated with growth and upstream migration of water-surface waves and antidunes, and with surface-wave breaking and filling of antidune troughs respectively. In addition, sets of downstream-dipping laminae are produced by rapid migration of asymmetrical bedwaves immediately after wave breaking. Rare convex-upward laminae define the shape of antidunes that developed under stationary water-surface waves. The laminasets and internal laminae extend across the width of the flume, but vary in thickness and inclination, indicating that the antidunes have some degree of three dimensionality. The length and maximum thickness of the lenticular laminasets are approximately half of the length and height of formative antidunes, providing a potentially useful tool for palaeohydraulic reconstructions. The sets of downstream-dipping laminae formed under antidunes are distinctive and do not occur in hummocky and swaley cross-strata. Sedimentary structures associated with chutes-and-pools are sets of upstream-dipping laminae and structureless sand.     

North European last glacial–interglacial transition (LGIT; 15–9 ka) tephrochronology: extended limits and new events

High‐precision correlation of palaeoclimatic and palaeoenvironmental records is crucial for testing hypotheses of synchronous change. Although radiocarbon is the traditional method for dating late Quaternary sedimentary sequences, particularly during the last glacial–interglacial transition (LGIT; 15–9 ka), there are inherent problems with the method, particularly during periods of climate change which are often accompanied by major perturbations in atmospheric radiocarbon content. An alternative method is the use of tephras that act as time‐parallel marker horizons. Within Europe, numerous volcanic centres are known to have erupted during the LGIT, providing considerable potential for high‐precision correlation independent of past radiocarbon fluctuations. Here we report the first identification of the Vedde Ash and Askja Tephra in Ireland, significantly extending the known provenance of these events. We have also identified two new horizons (the Roddans Port Tephras A and B) and tentatively recognise an additional horizon from Vallensgård Mose (Denmark) that provide crucial additional chronological control for the LGIT. Two phases of the Laacher See Tephra (LST) are reported, the lower Laacher See Tephra (LLST) and probably the C2 phase of the Middle Laacher See Tephra (MLST‐C2) indicating a more northeasterly distribution of this fan than reported previously. Copyright © 2006 John Wiley & Sons, Ltd.     

Petrogenesis of the Zoned Laacher See Tephra

The late Quaternary Laacher See phonolitic tephra deposit (EastEifel, W. Germany) is mineral-ogically and chemically zonedfrom highly evolved, volatile-rich and crystal-poor at its basetowards a mafic, crystal-rich phonolite at the top (Wörner& Schmincke, 1984). This zonation is interpreted as theresult of a continuous eruption from a zoned magma column. Majorand trace element evidence shows that the last erupted maficULST (Upper Laacher See Tephra) phonolite can be derived froma basanite parent magma via fractional crystallization of 30per cent clinopyroxene, 24 per cent amphibole, 4 per cent phlogopite,3.8 per cent magnetite, 2.5–3.0 per cent olivine and 1per cent apatite, leaving a derivative of 30 per cent evolvedmagma. Starting from the mafic (ULST) phonolite as a parent, the zonedsequence is postulated to have been formed by progressive fractionalcrystallization of the observed phenocryst phases. This modelwas tested by a series of 7 step-by-step mass balance fractionationcalculations. Abundance, modal composition and relative variationsof calculated fractionated phases agree well with the observedphenocryst abundances: sanidine followed by plagioclase andminor amounts of mafic phases are to be fractionated to givethe observed zoned sequence. The most evolved phonolite, however, cannot be generated bysubtraction of phenocrysts from the underlying phonolite. Processessuch as liquid-state differentiation may therefore have chemicallymodified the upper part (cupola) of the Laacher See magma columnsubsequent to crystal fractionation. The erupted phonolite magma (5.3 km³) was calculated to havestarted with a volume of 56 km³ of parental basanite magma whichfractionated to form 16.6 km³ of mafic phonolite. This magmafurther differentiated to give a 5.3 km³ zoned (erupted) phonolitecolumn. The non-erupted volume of 50 km³ is postulated to forma cooling cumulate body below the present day Laacher See volcano. The Laacher See magma system represents a complex end-membertype of a highly evolved small volume composition ally zonedmagma chamber with steep major and trace element gradients,the uppermost volatile rich magma layer resembling the stableroof part of rhyolitic chambers.     

Pyroclastic dune bedforms: macroscale structures and lateral variations. Examples from the 2006 pyroclastic currents at Tungurahua (Ecuador)

Pyroclastic currents are catastrophic flows of gas and particles triggered by explosive volcanic eruptions. For much of their dynamics, they behave as particulate density currents and share similarities with turbidity currents. Pyroclastic currents occasionally deposit dune bedforms with peculiar lamination patterns, from what is thought to represent the dilute low concentration and fluid‐turbulence supported end member of the pyroclastic currents. This article presents a high resolution dataset of sediment plates (lacquer peels) with several closely spaced lateral profiles representing sections through single pyroclastic bedforms from the August 2006 eruption of Tungurahua (Ecuador). Most of the sedimentary features contain backset bedding and preferential stoss‐face deposition. From the ripple scale (a few centimetres) to the largest dune bedform scale (several metres in length), similar patterns of erosive‐based backset beds are evidenced. Recurrent trains of sub‐vertical truncations on the stoss side of structures reshape and steepen the bedforms. In contrast, sporadic coarse‐grained lenses and lensoidal layers flatten bedforms by filling troughs. The coarsest (clasts up to 10 cm), least sorted and massive structures still exhibit lineation patterns that follow the general backset bedding trend. The stratal architecture exhibits strong lateral variations within tens of centimetres, with very local truncations both in flow‐perpendicular and flow‐parallel directions. This study infers that the sedimentary patterns of bedforms result from four formation mechanisms: (i) differential draping; (ii) slope‐influenced saltation; (iii) truncative bursts; and (iv) granular‐based events. Whereas most of the literature makes a straightforward link between backset bedding and Froude‐supercritical flows, this interpretation is reconsidered here. Indeed, features that would be diagnostic of subcritical dunes, antidunes and ‘chute and pools’ can be found on the same horizon and in a single bedform, only laterally separated by short distances (tens of centimetres). These data stress the influence of the pulsating and highly turbulent nature of the currents and the possible role of coherent flow structures such as Görtler vortices. Backset bedding is interpreted here as a consequence of a very high sedimentation environment of weak and waning currents that interact with the pre‐existing morphology. Quantification of near‐bed flow velocities is made via comparison with wind tunnel experiments. It is estimated that shear velocities of ca 0·30 m.s^?1 (equivalent to pure wind velocity of 6 to 8 m.s^?1 at 10 cm above the bed) could emplace the constructive bedsets, whereas the truncative phases would result from bursts with impacting wind velocities of at least 30 to 40 m.s^?1.     

Morphodynamics and sedimentary structures of bedforms under supercritical‐flow conditions: New insights from flume experiments

Supercritical‐flow phenomena are fairly common in modern sedimentary environments, yet their recognition and analysis remain difficult in the stratigraphic record. This fact is commonly ascribed to the poor preservation potential of deposits from high‐energy supercritical flows. However, the number of flume data sets on supercritical‐flow dynamics and sedimentary structures is very limited in comparison with available data for subcritical flows, which hampers the recognition and interpretation of such deposits. The results of systematic flume experiments spanning a broad range of supercritical‐flow bedforms (antidunes, chutes‐and‐pools and cyclic steps) developed in mobile sand beds of variable grain sizes are presented. Flow character and related bedform patterns are constrained through time‐series measurements of bed configurations, flow depths, flow velocities and Froude numbers. The results allow the refinement and extension of some widely used bedform stability diagrams in the supercritical‐flow domain, clarifying in particular the morphodynamic relations between antidunes and cyclic steps. The onset of antidunes is controlled by flows exceeding a threshold Froude number. The transition from antidunes to cyclic steps in fine to medium‐grained sand occurs at a threshold mobility parameter. Sedimentary structures associated with supercritical bedforms developed under variable aggradation rates are revealed by means of combining flume results and synthetic stratigraphy. The sedimentary structures are compared with examples from field and other flume studies. Aggradation rate is seen to exert an important control on the geometry of supercritical‐flow structures and should be considered when identifying supercritical bedforms in the sedimentary record.     

Late Pleistocene Eifel eruptions: insights from clinopyroxene and glass geochemistry of tephra layers from Eifel Laminated Sediment Archive sediment cores

The Eifel Laminated Sediment Archive (ELSA), which comprises several cores from maar lakes, includes numerous tephra layers spanning the last 140 000 years. The sediment cores are dated by ¹⁴C and thermoluminescence as well as tuned to Greenland stadial–interstadial successions. Within the last glacial cycle, the Eifel Volcanic Fields are source to several widespread tephra layers, namely the Laacher See, Eltville, Rambach and Rocourt Tephra. However, a corresponding source volcano was so far only identified for the Laacher See Tephra. In this study we use glass and clinopyroxene geochemistry to link the remaining tephra layers to possible eruption centers within the West and East Eifel Volcanic Fields: while we demonstrate that the Eltville Tephra originated from an earlier eruption of the Laacher See Volcano at 24 300 a bp from within the East Eifel Volcanic Field, the Rambach and Rocourt Tephras are sourced from the West Eifel Volcanic Field and erupted from Wartgesberg at 27 900 a bp and Pulvermaar at 75 000 a bp , respectively. Phases of volcanic activity peaked at 10 000–30 000 and 60 000–80 000 a bp and were thus erupted around the temperature minima of the last glacial cycle. The longest phase of dormancy between individual vents was around 30 000 years long, within the last interglacial.     

松辽盆地东南隆起区下白垩统营城组三段火山岩岩性、岩相序列

通过大比例尺野外岩性岩相填图、掌子面二维岩性岩相描述和详细岩矿鉴定,研究营城组三段内幕。本区营三段自下而上岩性序列表现为2个中基性到中酸性的火山岩旋回：①下部为石英安山岩、安山岩、安山质集块熔岩、安山质集块岩、安山质角砾岩和安山质角砾凝灰岩,向上过渡为砂质凝灰岩和英安质凝灰熔岩;②上部为玄武安山岩和玄武质集块熔岩,向上过渡为英安岩、珍珠岩、英安岩、英安质凝灰熔岩、英安质沉凝灰岩和英安岩。旋回①岩相纵向序列：溢流相下部亚相、火山通道相火山颈亚相、爆发相空落亚相、火山沉积相再搬运亚相、爆发相热碎屑流亚相。旋回②岩相纵向序列：溢流相上部亚相和下部亚相、火山通道相火山颈亚相、溢流相下部亚相、侵出相内带亚相、溢流相下部亚相、爆发相热碎屑流亚相、火山沉积相再搬运亚相、溢流相下部亚相。营三段火山岩发育于松辽盆地断陷末期,是盆地断陷转为坳陷过程的重要岩石记录。     

The Early Palaeozoic Break-up of Northern Gondwana: Sedimentology, Physical Volcanology and Geochemistry of a Submarine Volcanic Complex in the Bavarian Facies Association, Saxothuringian Basin, Germany

Ordovician volcano-sedimentary successions of the Bavarian facies association in the Saxothuringian basin record the continental rift phase of the separation of the Saxothuringian Terrane from Gondwana. An 80 m succession from the Vogtendorf beds and Randschiefer Series (Arenig-Middle Ordovician), exposed along the northern margin of the Münchberg Gneiss Massif in northeast Bavaria, were subjected to a study of their sedimentology, physical volcanology and geochemistry. The Randschiefer series previously has been interpreted as lavas, tuffs, sandstones and turbidites, but the studied Ordovician units include four main lithological associations: mature sandstones and slates, pillowed alkali-basalts and derivative mass flow deposits, trachyandesitic lavas and submarine pyroclastic flow deposits interbedded with turbidites. Eight lithofacies have been distinguished based on relict sedimentary structures and textures, which indicate deposition on a continental shelf below wave base. The explosive phase that generated the pyroclastic succession was associated with the intrusion of dykes and sills, and was succeeded by the eruption of pillowed basalts. Debris flow deposits overlie the basalts. Ordovician volcanism in this region, therefore, alternated between effusive and explosive phases of submarine intermediate to mafic volcanism.

Based on geochemical data, the volcanic and pyroclastic rocks are classified as basalts and trachyandesites. According to their geochemical characteristics, especially to their variable concentrations of incompatible elements such as the High Field Strength Elements (HFSE), they can be divided into three groups. Group I, which is formed by massive lavas at the base of the succession, has extraordinarily high contents of HFSE. The magmas of this group were probably derived from a mantle source in the garnet stability field by low (ca. 1%) degrees of partial melting and subsequent fractionation. Group II, which comprises the pillow lavas at the top of the sequence, displays moderate enrichment of HFSE. This can be explained by a slightly higher degree of melting (ca. 1.6%) for the primary magma. Group I and II melts fractionated from their parental magmas in different magma chambers. The eruption centres of Groups I and II, therefore, cannot be the same, and the volcanic rocks must have originated from different vents. The sills and pyroclastic flow deposits of Group III stem at least partly from the same source as Group I. Rocks of Group I most likely mixed together with Group II components during the formation of the Group III flows, which became hybridised during eruption, transportation and emplacement.

The sedimentological and geochemical data best support a rift as the tectonic setting of this volcanism, analogous to modern continental rift zones. Hence, the rift-associated volcanic activity preserved in the Vogtendorf beds and Randschiefer Series represents an early Ordovician stage of rift volcanism when the separation of the Saxothuringian Terrane from Gondwana had just commenced.     

Primary sedimentary structures and MISS in Gulcheru quartzite along SW part of Cuddapah basin

Sedimentary structures are very useful in paleocurrent analysis and interpretation of siliciclastic shallow marine environment. These interesting sedimentary structures such as parallel bedding, cross bedding, ripples, and mud cracks as well as synaeresis cracks, are best studied in the field. They are formed by a variety of sedimentary processes, including fluid flow, sediment-gravity flow, soft-sediment deformation and biogenic activity. Gulcheru Formation has evidence of interaction of microbial communities with clastic sedimentation during Palaeoproterozoic time. Because of high porosity-permeability of siliciclastics of Gulcheru Formation, palaeontologists do not expect many fossils preserved in such rocks and thus they have been overlooked. Microbially induced sedimentary structures (MISS) are highlighted in the Gulcheru Formation. They are indicative of shallow marine environment. Gulcheru Formation shows alluvial fan to shallow marine shelf environments within a limited thickness of about ~ 110m, which indicates an alluvial plain coast where alluvial deposits are modified by wave forces.     

广西合山马滩大隆组的沉积序列研究及其环境指示意义

马滩地区的大隆组,以火山碎屑岩和硅质岩沉积为主。镜下研究表明,火山碎屑岩可分为凝灰岩、沉凝灰岩和凝灰质沉积岩3亚类共8种岩石微相;硅质岩可分为生物成因硅质岩和生物火山成因硅质岩两亚类共5种岩石微相。这些岩石微相构成了12种主要的岩石相,而岩石相垂向上组成了6种主要的沉积序列。沉积序列指示该区存在两种类型的浊流沉积,一种是水下火山喷发形成的火山碎屑流向高密度浊流进而向低密度浊流演化的沉积,一种是早期沉积的凝灰质和硅质生物颗粒在滑塌作用下形成的浊流沉积。沉积序列研究并结合马滩地区大隆组沉积时期的古地形,表明当时该区不易发育海底扇沉积,而易接受低密度浊流沉积,形成了连续性好的较薄层沉积。     

松辽盆地白垩系营城组再搬运火山碎屑与相模式

以松辽盆地东南缘营城组二段两类火山碎屑岩(沉凝灰岩、凝灰质砂岩)为研究对象, 进行了火山碎屑粒度特征、碎屑组成和火山碎屑岩相研究.结果显示, 火山碎屑搬运除受火山作用激发控制外, 还受牵引流、重力流以及牵引流和重力流的双重机制影响.火山碎屑微观特征、成因分析和岩相分析认为, 本区火山碎屑堆积主体为热基浪堆积和热碎屑流堆积, 部分为空落堆积.火山碎屑组成特征为晶屑含量多, 玻屑和岩屑含量少, 且岩屑仅在较粗粒级颗粒组成中存在.研究认为, 本区发育的火山碎屑为沉积环境中的再搬运火山碎屑, 共识别出4种火山碎屑岩相, 河流故道上的热基浪, 河流故道上的热碎屑流, 冲积平原上的热基浪和空落相.建立了松辽盆地东南缘露头区营城组二段河流-冲积平原沉积环境的再搬运火山碎屑岩相模式.      

超临界浊流之地貌动力学和沉积特征

超临界流在现代沉积环境中几乎无处不在,但相关沉积物却极少从地层记录中被辨识出来,这是当前沉积学研究所面临的一个困境,文中称之为“超临界流沉积问题”。按弗劳德数增大顺序,超临界流可依次形成稳定逆行沙丘、不稳定逆行沙丘、急滩—深潭及周期阶坎等底形,相应的地貌动力学也从同相位体制(逆行沙丘)逐渐过渡为水跃体制(急滩—深潭和周期阶坎)。相对于明渠流,浊流因折算密度低而更易成为超临界流。超临界浊流底形的长波长、低幅度、逆流(坡)迁移特性,决定了其沉积物发育特征的后积层理、近平行—低角度交错层理、与水跃有关的快速堆积及冲刷—充填和建造—充填构造。超临界浊流沉积可以通过沉积体的几何形态(包括波长/波高比、平面和剖面形态等)和内部沉积特征(包括波脊逆坡迁移、沉积构造、粒度变化趋势及沉积相组合等)的综合分析加以鉴别。露头、岩心分析与高分辨率地震、浅剖、多波束测深等地球物理资料的综合,是准确鉴别超临界浊流沉积单元的重要途径。本文对超临界浊流地貌动力学研究进展进行综述,并对地层记录中超临界浊流沉积的鉴别标志及相关问题进行探讨。     

Upper flow regime sheets, lenses and scour fills: Extending the range of architectural elements for fluvial sediment bodies

Fluvial strata dominated internally by sedimentary structures of interpreted upper flow regime origin are moderately common in the rock record, yet their abundance is not appreciated and many examples may go unnoticed. A spectrum of sedimentary structures is recognised, all of which occur over a wide range of scale: 1. cross-bedding with humpback, sigmoidal and ultimately low-angle cross-sectional foreset geometries (interpreted as recording the transition from dune to upper plane bed bedform stability field), 2. planar/flat lamination with parting lineation, characteristic of the upper plane bed phase, 3. flat and low-angle lamination with minor convex-upward elements, characteristic of the transition from upper plane bed to antidune stability fields, 4. convex-upward bedforms, down- and up-palaeocurrent-dipping, low-angle cross-bedding and symmetrical drapes, interpreted as the product of antidunes, and 5. backsets terminating updip against an upstream-dipping erosion surface, interpreted as recording chute and pool conditions. In some fluvial successions, the entirety or substantial portions of channel sandstone bodies may be made up of such structures. These Upper Flow Regime Sheets, Lenses and Scour Fills (UFR) are defined herein as an extension of Miall's [Miall, A.D., 1985. Architectural-element analysis: a new method of facies analysis applied to fluvial deposits. Earth Sci. Rev. 22: 261–308.] Laminated Sand Sheets architectural element. Given the conditions that favour preservation of upper flow regime structures (rapid changes in flow strength), it is suggested that the presence of UFR elements in ancient fluvial successions may indicate sediment accumulation under the influence of a strongly seasonal palaeoclimate that involves a pronounced seasonal peak in precipitation and runoff.     

A discriminatory diagram of massive versus stratified deposits based on the sedimentation and bedload transportation rates. Experimental investigation and application to pyroclastic density currents

Dense gas-particle jets similar to collapsing eruption columns were generated by large-scale experiments. The column collapse resulted in a ground-hugging current forming stratified layers with bedding similar to natural pyroclastic density current deposits. At the impact of the collapsing column on the ground, a thick, massive bed was formed due to a high sedimentation rate that dumped turbulence due to high clast concentration. Down-current, flow expansion favoured turbulence and dilute gas-particle current that formed thin rippled layers deposited under traction. Experiments fed with fine ash (median size 0·066 mm) formed deposits without tractional structures, because fine particles, as other sedimentary fine material, is cohesive and exposes a limited surface to the shear stress. Experimental outcomes show that massive beds are formed where the sedimentation rate per unit width S_rw exceeds the bedload transportation rate Q_b by two orders of magnitude. A lower ratio generates traction at the base of the flow and formation of shear structures that increase in wavelength and height with a decreasing flux. This study presents a diagram that provides a useful addition for facies analysis of pyroclastic density currents, provided that deposits representing sustained sedimentation can be identified in the field. In the diagram a decrease in the S_rw/Q_b ratio corresponds to an increase in bedform size. Application of the diagram for hazard assessment purposes allows the reconstruction of the mass eruption rate of the Agnano–Monte Spina eruption at Campi Flegrei, which is the main variable defining the intensity of past eruptions, and of the Bingham rheology of the massive underflow of the Mercato pyroclastic density current at Vesuvius.     

Gravel antidunes in the tropical Burdekin River, Queensland, Australia

The geological record is punctuated by the deposits of extreme event phenomena, the identification and interpretation of which are hindered by a lack of data on contemporary examples. It is impossible to directly observe sedimentary bedforms and grain fabrics forming under natural particle-transporting, high-velocity currents, and therefore, their characteristics are poorly documented. The deposits of such flows are exposed however, in the dry bed of the Burdekin River, Queensland, Australia following tropical cyclone-induced floods. Long wave-length (up to 19 m) gravel antidunes develop during short (days) high-discharge flows in the upper Burdekin River (maximum recorded discharge near the study reach over 25 600 m³ s^?1 in February 1927). Flood water levels fall quickly (metres in a day) and flow is diverted away from raised areas of the river bed into subchannels, exposing many of the high-stage bedforms with little reworking by falling-stage currents. Gravel bedforms were observed on the dry river bed after the moderate flows of February 1994 (max. 7700 m³ s^?1) and January 1996 (max. 3200 m³ s^?1). The bedforms had wave-lengths in the range 8–19 m, amplitudes of up to 1 m with steeper stoss than lee faces and crest lines generally transverse to local peak-discharge flow direction. The gravel fabric and size sorting change systematically up the stoss and down the lee faces. The antidune deposits form erosive based lenses of sandy gravel with low-angle downstream dipping lamination and generally steep upstream dipping a-b planes. The internal form and fabric of the antidune gravel lenses are distinctly different from those of dune lee gravel lenses. The erosive based lenses of low-angle cross-bedded gravel with steep upstream dipping a-b planes are relatively easy to recognize and may be diagnostic of downstream migrating antidunes. The antidune gravel lenses are associated with thick (to 1 m) high-angle cross bed sets. Ancient antidune gravel lenses may be diagnostic of episodic high-discharge conditions and particularly when they are associated with high-angle cross-bedded gravelly sand they may be useful for palaeoenvironmental interpretation.     

Structures and sequences in early Permian fluvial Barakar rocks of peninsular India Gondwana basins using binomial and Markov chain analysis

Cyclic characteristics of bed forms (sedimentary structures) of early Permian fluvial Barakar rocks are studied statistically, using quasi-independence Markov chain and entropy. The hierarchy of sedimentary structures confirms that the corresponding bed forms do not represent random depositional event and follow a definite pattern of Markovian mechanism in a predictable cyclic arrangement. The preferential upward transition of sedimentary structures that can be derived for the Barakar sandstone is scoured surface (Ss) → horizontal bedding (Sh) → planar cross-bedded sandstone (Sp) → trough cross-bedded sandstone (St) → ripple cross-lamination (Sr) → parallel lamination (Fl) → scoured surface (Ss). The sequence is an asymmetrical cycle and characteristic of the lateral accretion and aggradations of fluvial channels. Entropy analysis corroborate the above inference, and E ^(pre) vs E^(post) plots for each sedimentary structure correspond to the type B category, suggesting lower and upper truncated asymmetrical cycles. Hydro-dynamically, the Barakar cycles represent a vertical sequence of bedding types which implies a steady upward decrease in the intensity of flow—from the upper flow regime in the lower part, the lower flow regime of moderate to high intensity in the middle part, and the lower flow regime of low to very low intensity in the upper part.     

Landscape response to the deposition of airfall pyroclastics from large explosive eruptions: An example from the campanian area (Southern Italy)

We present in this work data about a peculiar type of alluvial fans formed exclusively by volcaniclastic material from large explosive eruptions. Each alluvial fan results formed by the superimposition of several sedimentary bodies, each of them formed by quite homogeneous volcaniclastic material. Lithological analyses allow us to correlate each sedimentary body with the emplacement of pyroclastics from Phlegrean Fields or Somma-Vesuvius. The development of these alluvial fans is controlled by three main factors: area of dispersion of pyroclastics, morphological features of the supplying basin (i.e. mean slopes and area) and climate. Finally, we present an assessment of the minimum time needed for the complete remobilization of pyroclastics of Pomici di Base and Greenish eruptions.     

Petrographisehe Untersuehung der Gleesite des Laacher Seegebietes

In the present publication the hauyn-gleesites (in earlier publications called hauynsanidinites) and the other rocks, which belong genetically to the hauyn-gleesites, as hauynfree gleesites, hornblende-rich alkaligabbros, hornblendites, Laacher hauyntrachytes and hauynlatites, are described. All these different products can only be found in form of fragments in the trachyttuffs around the Laacher See (Germany).The microscopical analysis of the Laacher trachytes and hauynlatites demonstrates, that the magma has been strongly influenced by assimilation. This is characteristically demonstrated by the strong oscillation of the anorthit-content of the plagioclases in each fragment.The primary rocks, which are metamorphosed by the alkalisyenitic respectively alkalitrachytic magma, are the differentiationsproducts of an alkaligabbroic magma, hornblendites, hornblende-rich alkaligabbros and possibly monzonites. The crystallisations sequence of these rocks is: biotite hornblendite augite. The same sequence can be seen in the hauyn-free and the hauyn-bearing gleesites.The relative high content of titanite in the gleesites is remarcably. The source of the TiO₂, which is necessary for the formation of titanite, lies in the magnetites of the alkaligabbroic rocks. In the basic rocks the magnetit contains nearly 17 % Ti0₂. In the magnetite of the hauyn-free gleesites there is only 11 % and in the hauyn-gleesites, which are found in the latest phase of metamorphic transformation, is only 8–9% Ti0₂. The same content of 8–9% TiO₂ is found in the magnetites of the white trachyttuffs around the Laacher See. The glas in all these rock-fragments was formed by the heat during the eruption of the tuffs, possibly under the influence of alkali-rich gases.     

Genesis of zeolites in the Neapolitan Yellow Tuff: geological, volcanological and mineralogical evidence

 The study proposes a model by which a thick succession of volcanic tuffs can be zeolitized by alteration of pyroclastic material in the presence of sufficient eruptive water and at temperatures close to water vapour condensation. In the case of phreatomagmatic products, the model simplifies interpretation of problematic deposits that exhibit pronounced vertical and lateral variation in lithification grade. A major feature of the model is that thick zeolitized tuffs can be formed during emplacement of pyroclastic products, in marked contrast to later alteration in an open hydrologic system. Geological, volcanological and mineralogical data for the Neapolitan Yellow Tuff, a widespread trachytic pyroclastic deposit outcropping around Campi Flegrei (Southern Italy), have been used to infer the physico-chemical conditions that determined mineral genesis. This tuff shows a reduction in lithification grade towards the base, top and with distance from the vent and very variable zeolitization within the lithified portion. We suggest that during initial emplacement the erupted products chilled against the ground, inhibiting zeolite crystallization. During rapid deposition of the thick, wet succession thermal insulation allowed the persistence of elevated temperatures for a time sufficient for enhancement of hydration-dissolution processes in the volcanic glass. The highly reactive alkali-trachytic glass quickly buffered the acid pH of the system, favouring phillipsite crystallization followed by chabazite nucleation. The variable zeolite content reflects fluctuating emplacement conditions (e.g. changes in water content and temperature). Cooling of the upper and relatively thin distal deposits inhibited the zeolitization process, thereby preserving the primary unlithified deposit. Received: 25 May 1999 / Accepted: 28 October 1999