Measurement of vertical noise directionality with a mixed-polarity vertical array

A novel array was designed and tested in the eastern Pacific Ocean for the measurement of the vertical directionality of ambient noise. The results of the test, conducted in 1983, illustrate the existence of a 5-dB "noise notch" for arrival angles associated only with submerged acoustic sources. A measurement system based on improvements to the design and processing is described.     

海底、海面的边界反射对浅海环境噪声场的影响

关于海洋噪声谱级的理论,测量和分析以及相应噪声源的机理探讨已经有大量的工作;例如Knudson[6];EcKarf[2];Weng[10]和Piyyof[7]的工作.文〔1〕采用分层介质中的传播算子,推广了EcKarf的工作,建立了一般情况下由源特性及传播算子所表达的噪声场表示.目前关于传播条件--在浅海中特别是海底的反射特性--对环境噪声场特性的影响还较少有具体的结果.     

An ambient noise model for the northeast Pacific Ocean basin

An ambient noise model for the Northeast Pacific Ocean Basin is presented. This model possesses the capability of synthesizing the noise field, with resolution in the vertical and horizontal finer than 1/spl deg/. Simulation results utilizing the synthesized field are shown to be in excellent agreement with measured horizontal directionality, vertical directionality, and depth dependence data for frequencies from 12.5 to 250 Hz. An important difference between this model and other models is the consideration of the SOFAR channel component, which is the dominant noise at these low frequencies. It is shown that only when this component of the noise is included can the simulation results be expected to agree with measured data.     

Ambient Noise Vertical Directionality and Reflection Loss Estimates for a Shallow Tropical Site with a Fast Sound Speed Bottom

Abstract

For high frequency ocean acoustic modeling applications, seabed reflection loss is a useful alternative input compared to conventional geoacoustic model parameters. Reflection loss can be estimated by comparing the noise intensity of the up and down components of the ambient noise vertical directionality pattern. The potential of this method is demonstrated with experimental data spanning one week, collected off shallow east coast of India using a 21 element vertical hydrophone array. The compact and easily operable vertical array has been designed for high frequency directionality estimation in the band 2–10?kHz. The ambient noise data are beam formed to arrive at the vertical directionality pattern. Further reflection loss values as a function of frequency and grazing angle have been estimated for 1/3 octave bands for a sandy sea bed in warm tropical waters. This has been compared with modeled reflection loss estimates using OASR reflection loss module of OASES. This will serve as inputs to propagation models for applications such as inverse techniques, ambient noise modelling, and sonar system performance prediction.     

Deep-ocean vertical noise directionality

The structure of beam noise measured at the output of a vertical array in a range dependent ocean basin was investigated using the modified wide-angle parabolic equation (PE). Noise sources were distributed throughout the basin, and the field due to each noise source at an array located in the midbasin was calculated. The response of the array to the superposition of the noise sources was found by beamforming. An efficient and direct approach that superimposes the noise sources on the PE field as the field is marched toward the array was developed. Downslope calculations of the midbasin vertical directionality were made between 50 and 400 Hz with this technique. Use of a geoacoustic model shows that the bottom behaves as a low-pass filter     

Vertical directionality of ambient noise at 32°N as a functionof longitude and wind speed

Measurements of the ambient-noise field between 50 and 300 Hz with vertical arrays at 32°N (124°W, 136°W, and 150°W) have been made. Substantial differences in the vertical distribution of noise have been measured (especially at the higher frequencies), which can be interpreted in the context of attenuation by seawater sound absorption of coastal shipping noise. Under low wind-speed conditions, the vertical distribution of ambient noise is clearly concentrated within approximately ±15° of the horizontal. High wind speed has the effect of filling in the higher vertical angles, while leaving the level within the low-angular region unchanged     

Ambient noise measurements in the northwest Indian Ocean

Ambient noise measurements were made at seven different locations during the first four months of 1977. The measurement systems included: two types of towed arrays, a bottomed array, and systems with sensors distributed throughout the water column. The noise in the frequency regime dominated by shipping was found to be extremely high with a spectrum level of 92 dB//1 /spl mu/Pa at 50 Hz. These high levels were attributed to the high-density shipping. Horizontal directionality of the noise varied from site to site, ranging from highly directional to nearly nondirectional. The character of the directionality was highly dependent on the site position relative to shipping lanes. The noise showed very little dependence on depth.     

High-frequency ambient noise and its impact on underwater tracking ranges

A theoretical model for the vertical directionality and depth dependence of high frequency (8 to 50 kHz) ambient noise in the deep ocean is developed. The anisotropic noise field at a variety of depths and frequencies is evaluated and displayed. It was found that at high frequencies and deep depths, a bottom-mounted hydrophone receives the maximum noise energy from overhead rather than from the horizontal. This leads to the consideration of an oblate hydrophone receiving response pattern for underwater tracking ranges that would provide a constant signal-to-noise ratio (SNR) for an acoustic source located anywhere in a circular area centered above the hydrophone. Two of the desirable characteristics of this type of pattern are the increase in receiving range of a bottom-mounted sensor and the decrease of the dynamic range of signals that a signal processor must handle.     

Measured vertical noise directionality at five sites in the Western North Atlantic

Solutions were computed for the vertical ambient sea noise field directionality at five sites in the Western North Atlantic Ocean using data from a 26-hydrophone element array with a 358.4-foot aperture at a center depth of 1,000 feet. Results show that the low-frequency noise below 100 Hz is concentrated near the horizontal (50 to 93 percent of the noise power between /spl plusmn/15/spl deg/ of horizontal) and is apparently dependent on bottom loss and shipping density. The results in the band 200 to 380 Hz are a combination of sea state and shipping noise dependent. A noise field solution technique was developed involving noise cross spectral matrix inversions. This technique overcomes some of the drawbacks of previous techniques such as least mean square estimation and successive approximations.     

Beam forming on bottom-interacting tow-ship noise

Ship noise received on a horizontal array towed behind the ship is shown to be useful as a potentially diagnostic tool for estimating local acoustic bottom properties. In numerical simulations, tow-ship noise which bounces off the bottom is processed on a beamformer that shows the arrival angles; the beamformer output is readily interpreted by relating it to the Green's function of the acoustic wave equation. Simple signal processing is shown to be sufficient to extract the propagation angles of the "trapped" (i.e., propagating) modes of the acoustic waveguide. By relating the trapped modes to a basic geophysical model of the bottom, one can predict acoustic-propagation conditions for a particular bottom-interacting ocean acoustic environment.     

Estimation of Seabed Properties Using Ambient Noise from Shallow Water Sites of the Indian Continental Shelf

In this study an attempt has been made to extract sediment geoacoustic properties using ambient noise measured from a vertical hydrophone array. Time series noise data recorded from three shallow water sites (Chennai, Cuddalore and Cochin) along the Indian continental shelf were used for the analysis. The compressional sound speed of sediment for all the sites was estimated from the vertical directionality of ambient noise. Using the value of the compressional sound speed remaining wave properties and material properties were deduced from the Grain-Shearing (G-S) theory of wave propagation in saturated granular media. The type of sediment extracted from the G-S theory correlates well with the results obtained from sieve and particle size analysis of grab samples, collected from all the sites. The study clearly shows the application of ambient noise in extracting environmental information in shallow water, and further applying it to improve sonar performance modeling.     

SPECIAL FEATURE OF UNDERWATER AMBIENT NOISE IN NORTHERN HUANGHAI SEA AND ITS DEPENDENCE ON WIND SPEED

The local special feature of underwater ambient noise in the northern Huanghai sea has been investigated. The results obtained from the analysis of data measured for six days and nights have shown that the time-varying characterization of ambient noise spectrum level is remarkable and its fluctuation at every analyzed frequency band presents an equiform periodicity varying with time synchronously. The dependence of average ambient sea noise spectrum level on logarithmic wind speed within the middle range (16-30 knot) appears in "V" form.The current Crouch's conclusion (1972) has been developed by us to be a mathematical model based on the segment correlation regression. Using this model to describe and expain the characterization of local ambient sea noise is available.     

Model of Shipping Noise in the Deep Water: Directional Density and Spatial Coherence Functions

The shipping noise properties in the deep ocean are studied. Shipping noise exhibits the strong dual-horned directionality features in the flat-seabed ocean, and its directional density can be modeled by a Von Mises distribution. With the explicit expression for the directional density function, the spatial coherence functions of shipping noise are also derived, and the relative features are studied. The research result shows that the properties of shipping noise are different from the ambient noise of other sources, and it can be used for the sonar array design. The model is well matched with the experimental result, and it can be extended to the situations when the ambient noise exhibits the dual-horned structure.     

Depth dependence of ambient noise

Omnidirectional measurements of ambient noise versus depth in the Caribbean, Mediterranean, Arctic, Pacific, and Atlantic areas are presented. The shapes of the vertical ambient noise profiles spanning the water column at frequencies from 25 to 500 Hz are shown to be heavily influenced by passing ships. The qualitative features of average noise profiles measured by mid-water hydrophones can be explained with the aid of a straightforward model, and it is concluded that low-frequency omnidirectional ambient noise depth dependence is predictable. The sensitivity of the vertical noise profile to passing ships, coupled with noise predictability suggests that surveillance could be effected by a vertical string of hydrophones without coherent processing in areas of relatively light shipping.     

Active microwave measurement from space of sea-surface winds

Radar backscatter measurements from the ocean were made at 13.9 GHz from Skylab. The radar signal increased rapidly with wind speed over the entire range of winds encountered, and for angles of incidence of30degand larger. Signals observed were normalized to a nominal incidence angle (from values withinpm2degof the nominal) and to a nominal upwind observation direction, using a theoretical model that has been verified as approximately true with aircraft experiments. The wind speed was regressed against the resulting scattering coefficientssigma^{0}and the values ofbetain windpropto sigma^{0beta}were obtained for incident angles of1deg , 17deg , 32deg , 43deg,and50deg, and for vertical, horizontal, and cross polarizations. For the three larger angles,betavaries from 0.3 to 0.6. Observations during the summer and winter Skylab missions were treated separately because of possible differences caused by an accident to the antenna between the two sets of observations. The results are in general agreement with the theory [26] in all cases, with the winter and cross-polarized agreement somewhat better than that for summer like-polarized data. The "objective analysis" method used for determining "surface-truth" winds in the Skylab experiment was tested by comparing results obtained at weather ships (using all other ship reports to produce the analysis) with the observations made by the weather ships themselves. In most cases, the variance about the regression line between objective analysis and weather-ship data actually exceeded that about the regression line between objective analysis and backscattcr data!     

重力异常垂向一阶导数的一种简便算法

利用拉格朗日插值导出了重力异常垂向一阶导数的计算公式，给出了地面以及地面之上不同高度的求导系数。该公式可以计算地面上的重力垂向一阶导数，还可以直接计算地面之上任意高度上的垂向一阶导数。鉴于该公式除系数不同外，与上延公式完全相同，因此，程序设计尤为简单。使用本公式对模型数据和实际资料进行了处理，证明了本算法的实用性。     

Sea surface temperature retrieval based on simulated microwave polarimetric measurements of a one-dimensional synthetic aperture microwave radiometer

Compared with traditional real aperture microwave radiometers, one-dimensional synthetic aperture microwave radiometers have higher spatial resolution. In this paper, we proposed to retrieve sea surface temperature using a one-dimensional synthetic aperture microwave radiometer that operates at frequencies of 6.9 GHz, 10.65 GHz,18.7 GHz and 23.8 GHz at multiple incidence angles. We used the ERA5 reanalysis data provided by the European Centre for Medium-Range Weather Forecasts and a radiation transmission forward model to calculate the model brightness temperature. The brightness temperature measured by the spaceborne one-dimensional synthetic aperture microwave radiometer was simulated by adding Gaussian noise to the model brightness temperature.Then, a backpropagation(BP) neural network algorithm, a random forest(RF) algorithm and two multiple linear regression algorithms(RE1 and RE2) were developed to retrieve sea surface temperature from the measured brightness temperature within the incidence angle range of 0°–65°. The results show that the retrieval errors of the four algorithms increase with the increasing Gaussian noise. The BP achieves the lowest retrieval errors at all incidence angles. The retrieval error of the RE1 and RE2 decrease first and then increase with the incidence angle and the retrieval error of the RF is contrary to that of RE1 and RE2.     

Self-noise measurements using a moored sonobuoy with a suspended hydrophone

Moored sonobuoys are used for refraction seismic measurements at sea, although the range of operation is limited by the self noise caused by the hydrophone suspension.In this paper the main causes of self noise are discussed and a useful deployment scheme of a moored sonobuoy with suspended hydrophone is described.Some design criteria, in particular an equation for calculation of the optimal length of the expandable rubber band-which is situated between the surface float and the damping-body-are discussed.Finally, it is shown from noise measurements during the F. S. Valdivia cruise in 1975, that self noise level in the band 2 Hz to 20 Hz is 180 mPa to 280 mPa at a fully developed windsea with a characteristic wave height of more than 4 meters and a waterstream velocity about 0.5 m s¹.During these measurements the hydrophone was attached to the cable without rubber band. It is concluded that at a normal seastate the self noise level can be reduced to the order of ocean floor noise.     

近海海上风电场水下噪声传播模型适用性研究

通过现场采集近海海上风电场工程区运营期风机水下噪声和背景噪声数据,计算了噪声信号的倍频带声压级,功率谱级和峰值声压级,确定了海上风电场水下噪声总声源级为148.3 d B,以此开展近海海上风电工程风机水下噪声频域特性、功率密度谱特性等研究。在此基础上使用Kraken简正波模型和Bellhop射线模型对风电场运营期风机水下噪声在水平与垂直方向上的传播进行模拟,模拟了噪声在不同频带内的衰减程度,结果显示模型模拟结果在不同频率下的衰减趋势有着很大差异,产生了明显的多途干涉现象,通过实测数据对建立的噪声传播模型进行验证,发现Kraken简正波模型在500 Hz以下,Bellhop射线模型在500 Hz以上适合模拟实际水下噪声传播情形,同时海区本身背景噪声的存在会对预测的准确性产生影响。这些结论可用于进一步对近海海上风电场水下噪声传播的研究。