Spectral behavior of AM Her and QQ Vul in high and intermediate states in the UV

We present low resolution UV spectra of two polar systems, AM Her and QQ Vul from the observations taken by the IUE (International Ultraviolet Explorer) of the period between 1978–1996 and 1983–1996 for both systems respectively, to accomplish a large scale study of what happens to the ultraviolet flux of C IV 1550 Å spectral line during different orbital phases. Two spectra for both systems showing the variations in line fluxes and line widths at different orbital phases in high and intermediate states are presented. We concentrated on calculating the line fluxes and line widths of C IV 1550 Å emission line originating in the accretion stream. Our results show that there is spectral variability for the aformentioned physical parameters at different times, similar to that known for the light curve (Heise and Verbunt, Astron. Astrophys. 189:112, 1988; Gansicke et al., Astron. Astrophys. 303:127, 1995; Kafka and Honeycutt, Astron. J. 125:2188K, 2003). We attribute it to the variations of both density and temperature as a result of changing the mass transfer rate (Hutchings et al., Astron. J. 123:2841H, 2002; King and Lasota, Astron. Astrophys. 140L:16K, 1984) which is responsible for this spectral variability. Also we found that the line fluxes of AM Her are greater than the line fluxes of QQ Vul, while the line widths of both systems are approximately the same.     

Asteroseismic modelling of the solar-like star β Hydri

We present the results of modelling the subgiant star β Hydri using seismic observational constraints. We have computed several grids of stellar evolutionary tracks using the Aarhus STellar Evolution Code (ASTEC, Christensen-Dalsgaard in Astrophys. Space Sci. 316:13, 2008a), with and without helium diffusion and settling. For those models on each track that are located at the observationally determined position of β Hydri in the Hertzsprung-Russell (HR) diagram, we have calculated the oscillation frequencies using the Aarhus adiabatic pulsation package (ADIPLS, Christensen-Dalsgaard in Astrophys. Space Sci. 316:113, 2008b). Applying the near-surface corrections to the calculated frequencies using the empirical law presented by Kjeldsen et al. (Astrophys. J. 683:L175, 2008), we have compared the corrected model frequencies with the observed frequencies of the star. We show that after correcting the frequencies for the near-surface effects, we have a fairly good fit for both l=0 and l=2 frequencies. We also have good agreement between the observed and calculated l=1 mode frequencies, although there is room for improvement in order to fit all the observed mixed modes simultaneously.     

On the Use of Meteor Camera Systems in the Detection of Kuiper Belt Objects Through Serendipitous Stellar Occultations

The direct detection of Kuiper Belt Objects (KBOs) by telescopic imaging is not currently practical for objects much less than 100 km in diameter. However, indirect methods such as serendipitous stellar occultations might still be employed to detect these bodies. The method of serendipitous stellar occultations has been previously used with some success in detecting KBOs—Roques et al. (Astron J 132(2):819–822, 2006) detected three Trans-Neptunian objects; Schlichting et al. (Nature 462(7275):895–897, 2009) and Schlichting et al. (Astrophys J 761:150, 2012) each detected a single object in archival Hubble Space Telescope data. However, previous assessments of KBO occultation detection rates have been calculated only for telescopes—we extend this method to video camera systems, and we apply this derivation to the automated meteor camera systems currently in use at the University of Western Ontario. We find that in a typical scenario we can expect one occultation per month. However recent studies such as those of Shankman et al. (Astrophys. J. Lett. 764. doi:10.1088/2041-8205/764/1/L2, 2013) and Gladman et al. (AAS/Division for Planetary Sciences Meeting Abstracts, 2012) which indicate that the population of small KBOs may be smaller than has been assumed in the past may result in a sharp reduction of these rates. Nonetheless, a survey for KBO occultations using existing meteor camera systems may provide valuable information about the number density of KBOs.     

Spaxel analysis: probing the physics of star formation in ultraluminous infrared galaxies

This paper presents a detailed spectral pixel (spaxel) analysis of the ten Luminous Infrared Galaxies (LIRGs) previously observed with the Wide Field Spectrograph (WiFeS), an integral field spectrograph mounted on the ANU 2.3 m telescope, and for which an abundance gradient analysis has already been presented by Rich et al. (Astrophys. J., 753:5, 2012). Here we use the strong emission line analysis techniques developed by Dopita et al. (Astrophys. J. Suppl. Ser., accepted, 2013) to measure the ionisation parameter and the oxygen abundance in each spaxel. In addition, we use the observed Hα flux to determine the surface rate of star formation ( $\mathrm {M}_{\odot }{\rm yr}^{-1}$ kpc^?2) and use the [S II] λλ6717/6731 ratio to estimate the local pressure in the ionised plasma. We discuss the correlations discovered between these physical quantities, and use them to infer aspects of the physics of star formation in these extreme star forming environments. In particular, we find a correlation between the star formation rate and the inferred ionisation parameter. We examine the possible reasons for this correlation, and determine that the most likely explanation is that the more active star forming regions have a different distribution of molecular gas which favour higher ionisation parameters in the ionised plasma.     

Inclusion of sdBs in evolutionary population synthesis for binary stellar populations and the application: the determination of photo-z and galaxy morphology

Subdwarf B stars (sdBs) can significantly change the ultraviolet spectra of populations at age t～1 Gyr, and have been even included in the evolutionary population synthesis (EPS) models by Han et al. (Mon. Not. R. Astron. Soc. 380:1098, 2007). In this study we present the spectral energy distributions (SEDs) of binary stellar populations (BSPs) by combining the EPS models of Han et al. (Mon. Not. R. Astron. Soc. 380:1098, 2007) and those of the Yunnan group (Zhang et al. in Astron. Astrophys. 415:117, 2004; Mon. Not. R. Astron. Soc. 357:1088, 2005), which have included various binary interactions (except sdBs) in EPS models. This set of SEDs is available upon request from the authors. Using this set of SEDs of BSPs we build the spectra of Burst, E, S0–Sd and Irr types of galaxies by using the package of Bruzual and Charlot (Mon. Not. R. Astron. Soc. 344:1000, 2003). Combined with the photometric data (filters and magnitudes), we obtain the photometric redshifts and morphologies of 1502 galaxies by using the Hyperz code of Bolzonella et al. (Astron. Astrophys. 363:476, 2000). This sample of galaxies is obtained by removing those objects, mismatched with the SDSS/DR7 and GALEX/DR4, from the catalogue of Fukugita et al. (Astron. J. 134:579, 2007). By comparison the results with the SDSS spectroscopic redshifts and the morphological index of Fukugita et al. (Astron. J. 134:579, 2007), we find that the photo-z fluctuate with the SDSS spectroscopic redshifts, while the Sa–Sc galaxies in the catalogue of Fukugita et al. (Astron. J. 134:579, 2007) are classified earlier as Burst-E galaxies.     

CoRoT-2a Magnetic Activity: Hints for Possible Star–Planet Interaction

CoRoT-2a is a young (≈0.5 Gyr) G7V star accompanied by a transiting hot-Jupiter, discovered by the CoRoT satellite (Alonso et al. Astron Astrophys 482:L21, 2008; Bouchy et al. Astron Astrophys 482:L25, 2008). An analysis of its photospheric activity, based on spot modelling techniques previously developed by our group for the analysis of the Sun as a star, shows that the active regions on CoRoT-2a arised within two active longitudes separated by about 180° and rotating with periods of 4.5221 and 4.5543 days, respectively, at epoch of CoRoT observations (112 continous days centered at ≈2007.6). We show that the total spotted area oscillates with a period of about 28.9 days, a value close to 10 times the synodic period of the planet with respect to the active longitude pattern rotating in 4.5221 days. Moreover, the variance of the stellar flux is modulated in phase with the planet orbital period. This suggests a possible star–planet magnetic interaction, a phenomenon already seen in other extrasolar planetary systems hosting hot-Jupiters.     

Analysis of QCD ghost F(\tilde{R}) gravity

Flux variability is a common feature of Young Stellar Objects (YSOs), which is often related to intermittent events of disk accretion (EXors events in case of 3–4 magnitudes variations). Recently, thanks to the surveys carried out by the space missions Spitzer and WISE, it has become possible to perform statistical studies on the mid-IR variability on large samples of YSOs. As a follow-up of our recent statistical study on five star forming regions (Antoniucci et al., Astrophys. J. 782:51, 2014), we present the 3–5 μm variability study of the YSOs population of the Vela-D star forming region. We have compared the 3.6 μm and 4.5 μm Spitzer-IRAC fluxes of 181 YSOs in Vela-D with their WISE fluxes at 3.4 μm and 4.6 μm and selected those objects simultaneously varying in both bands. We have identified a robust sample of 34 variables. On the base of the infrared excess of the Spectral Energy Distribution (SED) and the magnitude vs. color variations, we select 5 EXors candidates, which will be systematically monitored to firmly ascertain their nature. The selected 34 variables represent ～18 % of the YSOs detected with Spitzer and WISE, a percentage higher than that of other young star forming regions. Conversely, the percentage of candidate EXors (2.7 %) is quite similar to that measured in Perseus, Ophiuchus and Serpens, and also equals that found in Vela-D on the base of Spitzer variability (Giannini et al., Astrophys. J. 704:606, 2009). Consistently with our finding presented in Antoniucci et al. (2014), this fraction equals the probability of observing the source once in burst and once in quiescence, under the hypothesis that the time elapsed between the two events is of about 0.5–1 year. Of the 5 selected EXors candidates, 3 are Class I sources, and 2 are flat-spectrum sources, a circumstance that suggests that accretion-driven variability is a common phenomenon during the earlier phases of the protostellar evolution. In the light of the new WISE data, we also re-examine a sample of 10 variables, which we had already selected in Giannini et al. (2009). From the inspection of their light curves, we select two flat-spectrum sources as the best EXors candidates.     

Global spectral energy distributions of the Large Magellanic Cloud with interstellar dust

The effects of dust on infrared emission vary among galaxies of different morphological types. We investigated integrated spectral energy distributions (SEDs) in infrared and submillimeter/millimeter emissions from the Large Magellanic Cloud (LMC) based on observations from the Herschel Space Observatory (HSO) and near- to mid-infrared observations from the Spitzer Space Telescope (SST). We also used IRAS and WMAP observations to constrain the SEDs and present the results of radiative transfer calculations using the spectrophotometric galaxy model. We explain the observations by using dust models with different grain size distributions in the interstellar medium of the LMC, noting that the LMC has undergone processes that differ from those in the Milky Way. We determined a spectral index and a normalization factor in the range of ?3.5 to ?3.45 with grain radii in the range of 1 nm–300 nm for the silicate grain and 2 nm–1 μm for the graphite grain. The best fit to the observed SED was obtained with a spectral index of ?3.47, similar to the value derived by Piovan et al. (Mon. Not. R. Astron. Soc. 366(3):923, 2006a). The grain size distribution is described using a power law but with a break that is introduced below a _b , where a larger exponent is used. Changing the graphite grain size distribution significantly changed the SED pattern within the observational uncertainties. Based on the SED fits to the observations from submillimeter wavelengths to infrared radiation from the LMC using GRASIL (Silva et al., Astrophys. J. 509(1):103, 1998), we obtained a reasonable set of parameter values in chemical and geometric space together with the grain size distributions (Weingartner and Draine, Astrophys. J. 548(1):296, 2001) and a modified MRN model with the LMC extinction curve (Piovan et al., Mon. Not. R. Astron. Soc. 366(3):923, 2006a). For a given set of parameters including the disc scale height, synthesis of the starlight spectrum, optical depth, escape time scale, dust model, and star formation efficiency, the adopted dust-to-gas ratio for modeling the observed SEDs, ～1/300 (from the literature) yields a reasonable fit to the observed SEDs and similar results with the metallicity of the LMC as those reported in Russell and Bessell (Astrophys. J. Suppl. Ser. 70:865, 1989). The dust-to-gas ratios that are given as the metallicity caused the variation in the model fits. The difference mainly appears at the wavelengths near 100 μm.     

Implementation and Comparison of Acoustic Travel-Time Measurement Procedures for the Solar Dynamics Observatory/Helioseismic and Magnetic Imager Time?–?Distance Helioseismology Pipeline

The Helioseismic and Magnetic Imager (HMI) instrument onboard the Solar Dynamics Observatory (SDO) satellite is designed to produce high-resolution Doppler-velocity maps of oscillations at the solar surface with high temporal cadence. To take advantage of these high-quality oscillation data, a?time?–?distance helioseismology pipeline (Zhao et al., Solar Phys. submitted, 2010) has been implemented at the Joint Science Operations Center (JSOC) at Stanford University. The aim of this pipeline is to generate maps of acoustic travel times from oscillations on the solar surface, and to infer subsurface 3D flow velocities and sound-speed perturbations. The wave travel times are measured from cross-covariances of the observed solar oscillation signals. For implementation into the pipeline we have investigated three different travel-time definitions developed in time?–?distance helioseismology: a Gabor-wavelet fitting (Kosovichev and Duvall, SCORE’96: Solar Convection and Oscillations and Their Relationship, ASSL, Dordrecht, 241, 1997), a?minimization relative to a reference cross-covariance function (Gizon and Birch, Astrophys. J. 571, 966, 2002), and a linearized version of the minimization method (Gizon and Birch, Astrophys. J. 614, 472, 2004). Using Doppler-velocity data from the Michelson Doppler Imager (MDI) instrument onboard SOHO, we tested and compared these definitions for the mean and difference travel-time perturbations measured from reciprocal signals. Although all three procedures return similar travel times in a quiet-Sun region, the method of Gizon and Birch (Astrophys. J. 614, 472, 2004) gives travel times that are significantly different from the others in a magnetic (active) region. Thus, for the pipeline implementation we chose the procedures of Kosovichev and Duvall (SCORE’96: Solar Convection and Oscillations and Their Relationship, ASSL, Dordrecht, 241, 1997) and Gizon and Birch (Astrophys. J. 571, 966, 2002). We investigated the relationships among these three travel-time definitions, their sensitivities to fitting parameters, and estimated the random errors that they produce.     

Intensity calibration of DEFPOS data

In this study, details of the intensity calibration of Dual Etalon Fabry-Perot Optical Spectrometer (DEFPOS) were described. At TUBITAK National Observatory (TUG), The DEFPOS was redesigned so as to observe galactic Hα emission line from the diffuse ionized gas with 4′ field of view (FOV) and then was located at the coudé exit of the 150 cm RTT150 telescope (?ahan et al., Research in Astronomy and Astrophysics (RAA) 9(2), 2009). The Absolute intensity calibration of the spectrometer was made by utilizing the data obtained from nine selected regions of NGC 7000 nebula. These regions were selected within 49′ FOV whose intensity calibration was determined to be 850±50 R by Scherb (Astrophys J 243:644–650, 1981). One of these regions was specially selected because of its intensity for the 4′ FOV was estimated as 900 R by Morgenthaler et al. (Astrophys J 563(1):451–461, 2001). For calibration of the DEFPOS data, the intensity values from Ishida and Kawajiri (PASJ 20:95–121, 1968) and the VTSS Hα maps were used and it was found that 1 ADU km s^???1 equals 2337.4 R for a 1200 s exposure time. The radial velocities and the line widths from these regions were also determined and compared with the previous results. These calibrations have been in close agreement.     

Time-resolved high-resolution spectroscopy of the pulsating sdB star QQ Vir (PG1325+101)

In this work, a standard solar model is computed with new reaction rates that take into account the exact astrophysical S-factor, S _e for the ³He(³He,2p)⁴He, ³He(α,γ)⁷Be and ⁷Be(p,γ)⁸B reactions. The exact S-factor which is valid for all energies is an improved version of the S-factor in the lower-energy approximation (Yusof and Kassim in Astrophys. Space Sci., 2009b). The effects of these new nuclear reaction rates on the solar neutrino fluxes are then discussed by comparing this model to a solar model computed with the standard NACRE reaction rates (Angulo et al. in Nucl. Phys. A. 656:3, 1999). The new reaction rates are found to decrease the neutrinos flux for ⁷Be and ⁸B by about 6% and 16%, respectively. A solar model is also computed with the reaction rates of the LUNA collaboration for ¹⁴N(p,γ)¹⁵O (Formicola et al. in Phys. Lett. B 591:61, 2004). In this case, a clear decrease of the fluxes for ¹³N and ¹⁵O is observed to be in good agreement with previous results (see e.g. Bahcall et al. in Astrophys. J. 621:L88, 2005).     

Application of a new non-linear least squares velocity curve analysis technique for spectroscopic binary stars

Using measured radial velocity data of nine double lined spectroscopic binary systems NSV 223, AB And, V2082 Cyg, HS Her, V918 Her, BV Dra, BW Dra, V2357 Oph, and YZ Cas, we find corresponding orbital and spectroscopic elements via the method introduced by Karami and Mohebi (Chin. J. Astron. Astrophys. 7:558, 2007a) and Karami and Teimoorinia (Astrophys. Space Sci. 311:435, 2007). Our numerical results are in good agreement with those obtained by others using more traditional methods.     

Preprocessing the Photospheric Vector Magnetograms for an NLFFF Extrapolation Using a Potential-Field Model and an Optimization Method

Numerical reconstruction/extrapolation of the coronal nonlinear force-free magnetic field (NLFFF) usually takes the photospheric vector magnetogram as input at the bottom boundary. The magnetic field observed at the photosphere, however, contains a force that is in conflict with the fundamental assumption of the force-free model. It also contains measurement noise, which hinders the practical computation. Wiegelmann, Inhester, and Sakurai (Solar Phys. 233, 215, 2006) have proposed to preprocess the raw magnetogram to remove the force and noise to provide better input for NLFFF modeling. In this paper we develop a new code of magnetogram preprocessing that is consistent with our extrapolation method CESE–MHD–NLFFF (Jiang, Feng, and Xiang in Astrophys. J. 755, 62, 2012; Jiang and Feng in Astrophys. J. 749, 135, 2012a). Based on the magnetic-splitting rule that a magnetic field can be split into a potential-field part and a non-potential part, we split the magnetogram and dealt with the two parts separately. The preprocessing of the magnetogram’s potential part is based on a numerical potential-field model, and the non-potential part is preprocessed using the similar optimization method of Wiegelmann, Inhester, and Sakurai (2006). The code was applied to the SDO/HMI data, and results show that the method can remove the force and noise efficiently and improve the extrapolation quality.     

Anisotropic fluid distribution in higher dimensional general theory of relativity

We have obtained static and spherically symmetric self-gravitating solution of the field equations for anisotropic distribution of matter in higher- dimensional in the context of Einstein’s general theory of relativity. This work is an extension of the previous work of Hector Rago (Astrophys. Space Sci. 183:333, 1991) for four dimensional space-time. The solutions are matched to the analytical solutions for spherically symmetric self gravitating distribution of anisotropic matter obtained by Hector Rago (1991) for n=2.     

Capture probability in the 3:1 mean motion resonance with Jupiter: an application to the Vesta family

We study the capture and crossing probabilities in the 3:1 mean motion resonance with Jupiter for a small asteroid that migrates from the inner to the middle Main Belt under the action of the Yarkovsky effect. We use an algebraic mapping of the averaged planar restricted three-body problem based on the symplectic mapping of Hadjidemetriou (Celest Mech Dyn Astron 56:563–599, 1993), adding the secular variations of the orbit of Jupiter and non-symplectic terms to simulate the migration. We found that, for fast migration rates, the captures occur at discrete windows of initial eccentricities whose specific locations depend on the initial resonant angles, indicating that the capture phenomenon is not probabilistic. For slow migration rates, these windows become narrower and start to accumulate at low eccentricities, generating a region of mutual overlap where the capture probability tends to 100 %, in agreement with the theoretical predictions for the adiabatic regime. Our simulations allow us to predict the capture probabilities in both the adiabatic and non-adiabatic cases, in good agreement with results of Gomes (Celest Mech Dyn Astron 61:97–113, 1995) and Quillen (Mon Not RAS 365:1367–1382, 2006). We apply our model to the case of the Vesta asteroid family in the same context as Roig et al. (Icarus 194:125–136, 2008), and found results indicating that the high capture probability of Vesta family members into the 3:1 mean motion resonance is basically governed by the eccentricity of Jupiter and its secular variations.     

The light-weighted age and metallicity of Galactic globular clusters

Spectra synthesis is entering a new era with the availability of large and high-quality spectroscopic data and full spectrum fitting methods. Establishing the reliability whether the STARLIGHT code (a full spectrum fitting code, Cid Fernandes et al. (Mon. Not. R. Astron. Soc. 358:363, 2005)) is suitable to study the properties of various types of galaxies is vital to galaxy study. In testing this possibility, Galactic globular clusters (GCs) provide an excellent medium. Taking the 40 Galactic GCs as an example in our work, we analyze their integrated spectra from Schiavon et al. (Astrophys. J. Suppl. 160:163, 2005) and obtain their mixtures of stellar populations that best represents their composite nature. Through analyzing the distributions of stellar ages and metallicities respectively, we find that the stellar metallicity distribution is centered at a low value and the stellar age distribution is very scattered. To compare with the literature, we also calculate the light-weighted ages and metallicities of GCs, and we find that the light-weighted metallicities agree with the literature, while the light-weighted ages are lower than those of the literature. This demonstrates that STARLIGHT can be used to obtain the metallicities of GCs.     

Increase of the mean Sun–Earth distance caused by a secular mass accumulation

Based on many planetary observations between the years 1971 and 2003, Krasinsky and Brumberg (Celest. Mech. Dyn. Astron. 90:267–288, 2004) have estimated a rate of increase in the mean Sun-Earth distance of (15±4) m per century. Together with other anomalous observations in the solar system, this increase appears to be unexplained (Lämmerzahl et al. in Astrophys. Space Sci. Lib., vol. 349, pp. 75–101, 2008). We explain these findings by invoking a recently proposed gravitational impact model (Wilhelm et al. in Astrophys. Space Sci. 343:135–144, 2013) that implies a secular mass increase of all massive bodies. This allows us to formulate a quantitative understanding of the effect within the parameter range of the model with a mass accumulation rate of the Sun of (6.4±1.7)×10¹⁰ kg?s^?1.     

Long-Term Variations of Solar Differential Rotation and Sunspot Activity: Revisited

Long-term variations of solar differential rotation and sunspot activity are investigated through re-analyzing the data on parameters of the differential-rotation law obtained by Makarov, Tlatov, and Callebaut (Solar Phys. 170, 373, 1997), Javaraiah, Bertello, and Ulrich (Astrophys. J. 626, 579, 2005a; Solar Phys. 232, 25, 2005b), and Javaraiah et al. (Solar Phys. 257, 61, 2009). Our results indicate that the solar-surface-rotation rate at the Equator (indicated by the A-parameter of the standard solar-rotation law) shows a secular decrease since Cycle 12 onwards, given by about 1?–?1.5×10^?3 (deg?day^?1?year^?1). The B-parameter of the standard differential-rotation law seems to also show a secular decrease since Cycle 12 onwards, but of weak statistical significance. The rotation rate averaged over latitudes 0^°?–?40^° does not show a secular trend of statistical significance. Moreover, the average sunspot area shows a secular increase of statistical significance since Cycle 12 onwards, while a negative correlation is found between the level of sunspot activity (indicated by the average sunspot area) and the solar equatorial rotation on long-term scales.     

Structure coefficients for use in stellar analysis

We present new values of the structural coefficients η _j , and related quantities, for realistic models of distorted stars in close binary systems. Our procedure involves numerical integration of Radau’s equation for detailed structural data and we verified our technique by referring to the 8-digit results of Brooker & Olle (Mon. Not. R. Astron. Soc. 115:101, 1955) for purely mathematical models. We provide tables of representative values of η _j , and related quantities, for j=2,3,…,7 for a selection of Zero Age Stellar Main Sequence (ZAMS) stellar models taken from the EZWeb compilation of the Dept. of Astronomy, University of Wisconsin-Madison. We include also some preliminary comparisons of our findings with the results of Claret and Gimenez (Astron. Astrophys. 519:A57 2010) for some observed stars.     

Comparisons between stellar models and reliability of the theoretical models

The high quality of the asteroseismic data provided by space missions such as CoRoT (Michel et al. in The CoRoT Mission, ESA Spec. Publ. vol. 1306, p. 39, 2006) or expected from new operating missions such as Kepler (Christensen-Dalsgaard et al. in Commun. Asteroseismol. 150:350, 2007) requires the capacity of stellar evolution codes to provide accurate models whose numerical precision is better than the expected observational errors (i.e. below 0.1 μHz on the frequencies in the case of CoRoT). We present a review of some thorough comparisons of stellar models produced by different evolution codes, involved in the CoRoT/ESTA activities (Monteiro in Evolution and Seismic Tools for Stellar Astrophysics, 2009). We examine the numerical aspects of the computations as well as the effects of different implementations of the same physics on the global quantities, physical structure and oscillations properties of the stellar models. We also discuss a few aspects of the input physics.