Palaeoclimate indicators (clay minerals,calcareous nannofossils,stable isotopes) compared from two successions in the late Jurassic of the Volga Basin (SE Russia)

A study of clay mineral and calcareous nannofossil abundances in late Jurassic–early Cretaceous sediments from the Volga Basin, SE Russia, is presented. From these results, we are able to compare some general patterns of mineralogical and palaeontological change for the Volga Basin to the palaeoclimate models developed for northern Europe and beyond. The two successions examined comprise calcareous mudstones with black organic‐rich shale horizons, overlain by a series of phosphatic silty sands. Clay mineralogical results show a progressive decrease in kaolinite and the concomitant increase of smectite and illite through the middle Volgian, followed by an abrupt increase in kaolinite in the late Volgian. The clay mineral evidence suggests increasing aridity at the end of the Jurassic, similar, in part, to many western European successions. Because of differential settling of clay minerals, superimposed upon this possible climatic signature is likely to be the effect of relative sea‐level change. Calcareous nannofossil analysis from a single section reveals a shift through the middle Volgian from low nutrient, warm water assemblages dominated by Watznaueria to cooler surface water and high nutrient assemblages dominated by Biscutum constans. These observations suggest that increased aridity is also associated with climatic cooling. Black shales are associated with increased productivity, higher sea levels and increases in smectite content. Hence, periods of low (chemical) hinterland weathering during semi‐arid conditions are paradoxically associated with relatively nutrient‐rich waters, and organic‐rich shales. Comparison of published carbon and oxygen stable isotope results from this and other sections to the clay mineral and nannofossil data confirms the palaeoclimatic interpretation. This study significantly improves the published biostratigraphically constrained clay mineral database for this time period, because other European and North American successions are either non‐marine (and thus poorly dated), absent (through penecontemporaneous erosion) or condensed. Copyright © 2002 John Wiley & Sons, Ltd.     

Stratigraphy,sedimentology, age and palaeoenvironment of marine varved clay in the Middle Swedish end‐moraine zone

Johnson, M. D. & Ståhl, Y. 2009: Stratigraphy, sedimentology, age and palaeoenvironment of marine varved clay in the Middle Swedish end‐moraine zone. Boreas, 10.1111/j.1502‐3885.2009.00124.x. ISSN 0300‐9483 Deglaciation of the Middle Swedish end‐moraine zone and age of the sediment in and between the moraines have been discussed for about a hundred years. The goal of this project was to determine the stratigraphy and age of the sediment in and between the moraines. Inter‐moraine flats are underlain by clay, 10–25 m thick, overlying thin sand and gravel or till on bedrock. The clay is overlain by a few metres of sand and gravel. Much of the clay beneath the flats consists of rhythmites that grade from grey to red and are 2–74 cm thick. Our interpretation of these rhythmites as being varves is supported by grain size and mineralogical and elemental variations. Foraminifera and ostracods show that the clay was deposited in an arctic marine environment, while radiocarbon dating of the microfossils indicates that the clay was deposited 12 150 cal. ¹⁴C years ago, during the Younger Dryas chronozone (YD). Most of the optical stimulated luminescence dates on the clay are much older, containing quartz sand that was insufficiently bleached. The stratigraphy indicates that the moraines are composed of YD clay pushed into ridge forms during ice‐front oscillations. It is not possible to determine how far north the Scandinavian Ice Sheet retreated prior to the YD advance. We neither support nor reject the suggestion that the ice margin retreated to the northern edge of Mt. Billingen during the Allerød, causing the Baltic Ice Lake to drain.     

三角形周期荷载作用下软基路堤沉降研究

采用能够同时考虑主次固结变形的Yin-Graham一维弹黏塑性模型,对三角形周期荷载作用下软土路堤运行期间和运行期结束时的长期沉降进行了理论分析,获得三角形周期荷载作用下软基路堤运行期结束时的总沉降计算公式和工后沉降计算公式。分析了三角形周期荷载作用下软基不考虑流固耦合与考虑流固耦合时长期沉降之间的相互关系,证明了三角形周期荷载作用下当循环荷载次数趋向于无穷大时软基具有最终沉降量与应力随时间增长的模式无关的性质。按照文中提供的总沉降计算公式,针对具体工程的土工参数,对路堤运行期结束时的总沉降量进行了计算,并由此确定运行期开始时软基应发生的沉降量,为合理确定高速公路路面铺筑时机提供沉降标准。     

Palaeogeography and clay mineralogy of mid-Cretaceous flysches in the Gibraltar Arc area

A combined sedimentological and mineralogical study of several mid-Cretaceous sequences of the western Betic Cordillera and northern Rif has lead to the distinction of three main palaeogeographic areas. The basins of these areas received influxes of terrigenous sediments from different source areas. The southern Iberian margin was fed from the Iberian palaeocontinent and its clay-mineral association is characterized by a high content of well crystallized illite and kaolinite; the distal part of this margin was locally starved of continental sedimentation, but contains a considerable clayey contribution, probably oceanic in origin, made up mainly of smectites, illite and palygorskite. The sediments in the North African margin and the southern part of the North African Flysch Trough came from the African continent, the typical Aptian-Albian clay-mineral association being well crystallized illite, illite-smectite mixed layers, kaolinite, chlorite and lesser quantities of vermiculite. The terrigenous supply to the Mauritanian Realm of the North African Flysch Trough came from the Meso-Mediterranean terrane, and its usual Aptian-Albian clay association is illite, vermiculite, illite-smectite mixed layers and kaolinite. A significant change in the clay mineralogy occurred during the late Albian-early Cenomanian in the two former areas, consisting of a decrease in the detrital supply and a concomitant increase in smectites and palygorskite.The sedimentological and mineralogical evolution of this area was controlled by a combination of tectonic, eustatic and climatic changes in the westernmost Tethys during the mid-Cretaceous.     

江西赣南风化淋滤型稀土矿床中的粘土矿物研究

对江西赣南6个地区风化淋滤型稀土矿中全风化层的粘土矿物进行了研究,为进一步了解粘土矿物对该类型稀土矿中稀土元素分异的影响奠定了基础。X射线衍射自然定向片、甲酰胺片、饱和乙二醇片和加热片、红外光谱及扫描电镜观察结果表明该区粘土矿物以片状高岭石和针管状7埃洛石为主,其中坳背塘、长坑屋、上堡、杨村样品主体为高岭石,足洞样品中发育大量埃洛石,而石排样品中高岭石与埃洛石比例相当。电感耦合等离子体质谱分析表明稀土元素在粘土矿物中大量富集,其稀土元素配分不仅受到原岩的影响,而且受到粘土矿物本身性质的影响。Ce元素在足洞和石排样品的粘土矿物中表现出正异常,而在其他样品粘土矿物中表现为负异常,可能与其中发育的埃洛石密切相关。Ce元素可能以方铈矿胶膜的形式包裹在针状埃洛石中,和/或以离子形式被选择性吸附于埃洛石表面。     

成都平原区成都粘土的粒度特征及其成因意义

对成都平原区内5个代表性的第四系剖面上的成都粘土进行了系统的粒度分析。结果表明,成都粘土以粉砂颗粒（5～50μm）为主,平均粒径约为7．1—7．3φ（7．4—6．6μm）,缺少粗尾,〉63μm颗粒的含量很少,以细颗粒物质为主,呈双峰分布。其粒度分布及粒度参数特征与北方黄土及甘孜黄土非常相似,而与河流相沉积物有很大差异,表明成都粘土属于风成堆积。根据光释光测年（OSL）结果,成都平原区的成都粘土是晚更新世中期至晚期末次冰期堆积物,其物质主体是远源的。     

Syn- and post-sedimentary controls on clay mineral assemblages in a tectonically active basin,Andean Argentinean foreland

In the northern part of the Calchaquí Valley (NW Argentina), Palaeogene Andean foreland sediments are represented by a 1400-metre-thick continental succession (QLC: Quebrada de Los Colorados Formation) consisting of claystones, siltstones, sandstones, and conglomerates representing sedimentation in fluvial-alluvial plains and alluvial fan settings. To understand the main syn- and postsedimentary variables controlling the clay mineral assemblages of this succession, we have studied the fine-grained clastic sediments by X-ray diffraction and electron microscopy, along with a detailed sedimentary facies analysis, for two representative sections. In the northern section, the whole succession was sampled and analysed by XRD, whereas in the second section, a control point 15 km to the south, only the basal levels were analysed. The XRD study revealed a strong contrast in clay mineral assemblages between these two sections as well as with sections in the central Calchaquí Valley studied previously. In the northernmost part of the study area, a complete evolution from smectite at the top to R3 illite/smectite mixed-layers plus authigenic kaolinite at the bottom, through R1-type mixed-layers in between, has been recognized, indicating the attainment of late diagenesis. In contrast, the clay mineral assemblages of equivalent foreland sediments cropping out only 15 km to the south contain abundant smectite and micas, subordinate kaolinite and chlorite, and no I/S mixed-layers to the bottom of the sequence. Early diagenetic conditions were also inferred in a previous study for equivalent sediments of the QLC Formation cropping out to the south, in the central Calchaquí Valley, as smectite occurs in basal strata. Burial depths of approximately 3000 m were estimated for the QLC Formation in the central and northern Calchaquí Valley; in addition, an intermediate to slightly low geothermal gradient can be considered likely for both areas as foreland basins are regarded as hypothermal basins. Consequently, the attainment of late diagenesis in the northernmost study area cannot be explained by significant differences in burial depth nor in geothermal gradient in relation to the section 15 km to the south nor with the central Calchaquí Valley. The formation of R3 mixed-layer I/S and authigenic kaolinite in the northern study area was most likely controlled by the circulation of hot, deep fluids along the reverse faults that bounded the Calchaquí valley. These faults were active during the Cenozoic, as evidenced by the syndepositional deformation features preserved in the studied sediments. Stress could also have been a driving force in burial diagenesis at the R3 mixed-layer I/S stage in these young continental sediments.     

湛江组结构性黏土区域微观结构特性研究

形成于早更新世的湛江组地层广泛分布于雷州半岛地区,其最为典型的灰色黏土因具有强结构性,在实际工程中出现了一系列岩土工程问题,为众多学者所关注。根据地层学研究结果,雷州半岛各区域的湛江组灰色黏土具有不同沉积环境。由于地质成因的差异,灰色黏土在不同区域表现出不同的工程特性。工程实际中,灰色黏土工程特性的区域性,使得工程界及研究者对于该土层的工程力学效益更是难以掌握。利用X射线衍射试验及电镜扫描试验,研究了不同区域灰色黏土的矿物成分及含量、微结构等微观结构特性。结果表明：不同沉积环境灰色黏土矿物成分及含量存在区域性差异,各矿物成分按照不同比例组合,形成的土体微结构区域特性明显。灰色黏土具有强结构性微观机制的揭示及区域差异性的分析,有利于对该层黏土的全面认知和利用。     

Characteristics and implication of clay minerals in the northern and southern parts of the Chelung-pu fault, Taiwan

In this study, we report the characteristics of clay minerals present in the Chelung-pu fault in Taiwan. In the 1999 Chi-Chi earthquake, different slip motions were recorded along the Chelung-pu fault in the northern and southern parts of the fault. The characteristics of clay minerals present in the fault zones can be attributed to the differences in motion. We analyzed the shallow drill core samples obtained from the northern and southern sites penetrating the fault. The clay minerals identified in most of the samples from both the sites are smectite, illite, and chlorite. There are illite–smectite mixed layers with a high illite content and no chlorite–smectite mixed layer. In some samples, no smectite is detected. We also examined the iron content and symmetry of iron and magnesium in the silicate and hydroxide layers in chlorite. At the northern site, the total iron content in chlorite of gouge is larger than that of the host rocks. On the other hand, at the southern site, the total iron content varies widely. It is hypothesized that the smectite consumption and differences in the characteristics of chlorite may be controlled by the differences in the lithology, fluid chemistry, fluid temperature, or fault activities (heating or breakage) between the northern and southern sites.     

原位冻结黏土单轴压缩试验研究

采用沈阳原位冻结黏土制备了冻土单轴压缩试样,进行了冻结黏土的单轴压缩试验,获得了冻结黏土单轴压缩载荷-位移关系曲线,并对原位冻结黏土的破坏特征进行了研究。试验表明,原位冻结黏土在给定温度（-15℃）和加载速率范围（2.5×10-2~1.0×10-5 mm/s）下,开始均具有一定的线弹性压缩过程,随后产生微裂纹,而冻土也进入塑性硬化阶段,随着裂纹的扩展与贯通,最终达到剪切破坏。原位冻土的破坏形型表明,由于其固有的结构性,使之与重塑土的单轴压缩破坏特征具有明显的不同。     

Palaeoenvironmental significance of the clay mineral composition of Olduvai basin deposits,northern Tanzania

Quaternary deposits in the southeastern part of the Olduvai basin, northern Tanzania, consist of lake margin deposits, followed by a series of fluvial sediments. The clay mineral fraction of the lake margin deposits (Bed I and lower part of Bed II) is composed of smectite and subordinate illite. All smectite is largely dioctahedral and shows indications for a limited degree of irregular interstratification by illite. In the overlying fluvial deposits (Beds II–IV), illite is the most abundant clay mineral. Smectite only occurs in lower parts of the fluvial deposits (up to the middle of Bed III), where it generally shows a high degree of irregular interstratification. Differences in clay mineral composition between the lake margin deposits and the fluvial deposits record differences in sediment source area and degree of alteration. Dioctahedral smectite in the lake margin deposits and the oldest fluvial deposits is derived from a region with volcanic material extending to the east and south of the basin, which also supplies a certain amount of illite. Illite in the fluvial deposits of Bed IV originates from an area with a metamorphic bedrock to the west and north. Alteration of detrital clay minerals resulted in Mg-enrichment of dioctahedral smectite in part of the lake margin deposits and partial illitization of smectite in the older fluvial deposits. Formation of clay minerals during diagenesis or soil development is not documented by analysis of the total clay fraction.     

南海北部区域黏土循环动力特性试验研究

采用南海北部区域油田场址钻孔原状土样,开展黏土循环动力特性试验研究。结合共振柱与应变控制的循环单剪试验,获取动剪切模量和阻尼比随循环剪应变的变化规律,将最大动剪切模量与原位静力触探的计算结果进行对比。开展应力控制的循环单剪试验,采用对称加载方式获取土样动强度阈值,基于该阈值,通过单、双向加载方式获取土样动强度包络线,并将试验结果与Drammen黏土及世界范围内其余区域黏土进行对比。该研究初步获取了南海北部区域性黏土的循环特性及动力学参数,为南海北部区域油气田结构设计和地质风险评估提供基础资料,掌握了循环动力特性试验方法,为岩土工程动力学试验研究及数据分析提供技术参考。     

Diffractometric clay mineral analysis of Recent sediments of Lake Constance (Central Europe)

Mica, smectite, and chlorite are the characteristic clay minerals in about 120 Recent sediment samples of Lake Constance as shown by semiquantitative clay mineral analysis. Interstratified clay minerals are practically absent, kandites were not found.The decrease of the smectite/mica ratio from West to East is apparently due to the dominance of the mica-chlorite assemblage of the Rhine river derived from the northern Alps in the eastern part of the lake. With increasing distance from the delta of the Rhine river, the Tertiary Molasse clay minerals (mainly mica and smectite) derived from rocks surrounding the lake become more abundant.

---

Zusammenfassung An 120 Sedimentproben aus dem Bodensee wurde der Tonmineralbestand der Fraktion <2 durch die röntgenographische Phasenanalyse halbquantitativ ermittelt.Glimmer, Smectit und Chlorit sind die charakteristischen Tonmineralgruppen in den Sedimenten. Mixed-layer-Minerale treten so gut wie nicht auf, Kandite konnten nicht nachgewiesen werden.Aus der Bestimmung der relativen Häufigkeit von Glimmer und Smectit ergibt sich, daß das Smectit/Glimmer-Verhältnis von Osten (Einmündung des Alpenrheins) nach Westen ständig zunimmt.Diese Verteilung ist durch die Zufuhr von Glimmer und Chlorit durch den Alpenrhein aus den nördlichen Alpen bedingt, die jedoch mit zunehmender Entfernung vom Delta durch die Molasse-Distributiv-Provinz mit vorherrschend Glimmer und Smectit überlagert wird.

     

宁波地区典型淤泥质粘土工程特性

总结宁波地区120个软土地基工程的试验成果,采用数理统计和室内土工试验方法,系统分析研究了宁波地区典型淤泥质粘土的物理力学指标特征、各指标间的相互关系以及固结主要参数,并与我国其他地区软土相关工程特性进行比较,揭示了宁波地区典型软粘土工程特性,即:天然含水率与孔隙比、重度与孔隙比、液限与塑性比相关性非常好;建立的宁波地区软土经验公式不同于其他软土地区。此外,结构性对该地区软土工程性状影响较大,固结系数和次固结系数都受其影响,且影响程度异于其他地区。      

杭州软黏土非共轴特性的试验研究

利用空心圆柱扭剪仪对杭州软黏土进行了一系列不排水试验,包括对原状软黏土在不同主应力方向上的定向剪切试验和主应力轴旋转试验以及对重塑软黏土的主应力轴旋转试验,主要研究不同应力路径下软黏土非共轴角的发展特性以及中主应力系数b、初始剪应力水平和次生各向异性对其非共轴特性的影响。试验结果表明,软黏土的非共轴特性虽与砂土存在相似之处,但又不尽相同。原状软黏土在定向剪切条件下的非共轴角均较小,并且与加载方向有关,然而受剪应变发展的影响,试样接近破坏时的非共轴角并不为0°;主应力轴旋转条件下,无论原状还是重塑黏土其非共轴角均随主应力方向角? 增加而循环波动变化,且周期约为90°;非共轴角基本随中主应力系数b的增加而减小,但这种影响并不十分显著;剪应力水平对非共轴角的大小和发展趋势均存在一定的影响。对于重塑土的试验表明,软黏土的非共轴特性并不完全由土体的初始各向异性所决定,次生各向异性的影响也很大。     

Provenance of iron,bauxite and clay deposits of the Carboniferous Benxi Formation in southern margin of North China Craton: An example from Da'an bauxite and clay deposit of Sanmenxia area,Henan Province

During the Middle Ordovician to Late Carboniferous period,the North China Craton(NCC)was exposed and experienced prolonged weathering that resulted in the formation of large-scale iron,clay and bauxite deposits. The source of ore-forming material has always been a research focus,in particular,whether the sources of the iron ore and the Fe-bearing clay at the bottom of Benxi Formation are the same as the upper bauxite and clay deposit is still unclear. In this study,the Da'an bauxite and clay deposit at the southern margin of the NCC was chosen to carry out a detailed analysis of the micro-region mineral composition and elemental geochemical characteristics for further exploring the sources of iron,bauxite and clay deposits. The composition of the ore-bearing rocks in the Da'an bauxite deposit from the bottom to top includes Fe-bearing clay(locally iron ore),bauxite,and bauxitic clay;locally,in karstic uplift,bauxitic clay layer is directly overlying on the Fe-bearing clay. The Fe-bearing clay is dominated by siderite,pyrite,and illite in the karstic depression,and hematite,illite,and kaolinite in the uplift. Bauxite is mainly composed of diaspore,illite,and anatase,while bauxitic clay is mainly composed of illite. Mineral microanalysis revealed the development of large amounts of moissanite and small amounts of natural silica,silicalite,and chromite at the bottom of bauxitic clay layer. Regional comparison and correlation reveal that the ophiolite in the Shangdan suture zone and Erlangping Group in the North Qinling orogenic belt(NQOB)likely provides source materials for bauxite and clay deposits. The obvious differences in immobile element ratios (e.g., Zr/TiO₂,Hf/TiO₂,Nb/TiO₂,Ta/TiO₂)between the bottom Fe-bearing clay layer and the upper bauxite and clay layer in Da'an deposit,revealing that they are from different sources. The bottom Fe-bearing clay and iron ore layers are the products of in-situ weathering of underlying carbonates,while the top bauxite and clay are allochthonous. The regional uplift of the NQOB during the Late Carboniferous period provided important ore-forming materials for the formation of the NCC bauxite and clay deposits.     

Geotechnical evaluation of Turkish clay deposits: a case study in Northern Turkey

Clay deposits in Oltu-Narman basins (Erzurum, northern Turkey) have been studied to determine their engineering properties and to evaluate their uses for geotechnical applications. These deposits are concentrated in two different stratigraphic horizons namely the Late Oligocene and the Early Miocene sequences. Clay-rich fine-grained sedimentary units are deposited in shallow marine and lagoonar mixed environments. Their clay minerals originated by the alteration of Eocene calc-alkaline island-arc volcanics, preferably from pyroclastics (trachite and andesite flow), which form the basement for the Oltu depression. Smectite group clay minerals are found abundant in clay deposits. The experimental results show that the clay soils have high plasticity behaviors and low hydraulic conductivity properties. The optimum water content, the free swell, and the swelling pressure of clay samples decreased and the maximum dry unit weight of clay samples increased under high temperature. Consequently, it is concluded that the expanding of clay soils is an important soil problem that cannot be avoided in the significant parts of Oltu city and its villages. However, the soils of clay-rich layers in the outcrops-section of clay deposits can be successfully used to build compacted clay liners for landfill systems and to construct vertical and horizontal barriers for protection of ground water and for preventing soil pollution in geotechnical applications.     

华北克拉通南缘石炭系本溪组铁-铝黏土矿物质来源: 以河南三门峡大安铝黏土矿床为例*

华北克拉通在中奥陶世至晚石炭世期间一直出露地表,经历了长期的风化作用,形成大规模的铁-铝黏土矿,其成矿物源一直是研究的热点,尤其是本溪组底部铁矿和铁质黏土矿与上部铝黏土矿是否为同一来源尚未查清。本研究选取克拉通南缘大安铝黏土矿床作为研究对象,展开微区矿物及元素地球化学组成分析,进一步探讨铁-铝黏土矿物质来源。大安矿床内含矿岩系自下而上包括铁质黏土岩、铝土矿、铝质黏土矿;局部喀斯特高地缺失铝土矿,铝质黏土矿直接覆盖于铁质黏土岩之上。铁质黏土岩在洼地以菱铁矿、黄铁矿和伊利石为主,在隆起区以赤铁矿、伊利石和高岭石为主。铝土矿以硬水铝石、伊利石和锐钛矿为主;铝质黏土矿主要矿物为伊利石。矿物微区分析在黏土矿底部发现大量的碳化硅和少量自然硅、硅铁矿、铬铁矿;区域对比揭示北秦岭造山带内商丹缝合带和二郎坪群中的蛇绿岩为铝黏土矿形成提供了成矿物质。本溪组底部铁质黏土与上部铝黏土矿稳定元素比率(例如Zr/TiO₂、Hf/TiO₂、Nb/TiO₂、Ta/TiO₂)存在明显差异,揭示二者为不同来源: 底部铁质黏土岩和铁矿层为底板碳酸盐岩原地风化的产物;而上部铝黏土矿是异地搬运物,北秦岭造山带在晚石炭世的整体抬升为华北铝黏土矿形成提供了重要的成矿物质。