Seismic profiles across the middle Tan-Lu fault zone in Laizhou Bay,Bohai Sea,eastern China

The stratigraphic architecture, structure and Cenozoic tectonic evolution of the Tan-Lu fault zone in Laizhou Bay, eastern China, are analyzed based on interpretations of 31 new 2D seismic lines across Laizhou Bay. Cenozoic strata in the study area are divided into two layers separated by a prominent and widespread unconformity. The upper sedimentary layer is made up of Neogene and Quaternary fluvial and marine sediments, while the lower layer consists of Paleogene lacustrine and fluvial facies. In terms of tectonics, the sediments beneath the unconformity can be divided into four main structural units: the west depression, central uplift, east depression and Ludong uplift. The two branches of the middle Tan-Lu fault zone differ in their geometry and offset: the east branch fault is a steeply dipping S-shaped strike-slip fault that cuts acoustic basement at depths greater than 8 km, whereas the west branch fault is a relatively shallow normal fault. The Tan-Lu fault zone is the key fault in the study area, having controlled its Cenozoic evolution. Based on balanced cross-sections constructed along transverse seismic line 99.8 and longitudinal seismic line 699.0, the Cenozoic evolution of the middle Tan-Lu fault zone is divided into three stages: Paleocene–Eocene transtension, Oligocene–Early Miocene transpression and Middle Miocene to present-day stable subsidence. The reasons for the contrasting tectonic features of the two branch faults and the timing of the change from transtension to transpression are discussed.     

Seismic profiles across the middle Tan-Lu fault zone in Laizhou Bay, Bohai Sea, eastern China

The stratigraphic architecture, structure and Cenozoic tectonic evolution of the Tan-Lu fault zone in Laizhou Bay, eastern China, are analyzed based on interpretations of 31 new 2D seismic lines across Laizhou Bay. Cenozoic strata in the study area are divided into two layers separated by a prominent and widespread unconformity. The upper sedimentary layer is made up of Neogene and Quaternary fluvial and marine sediments, while the lower layer consists of Paleogene lacustrine and fluvial facies. In terms of tectonics, the sediments beneath the unconformity can be divided into four main structural units: the west depression, central uplift, east depression and Ludong uplift. The two branches of the middle Tan-Lu fault zone differ in their geometry and offset: the east branch fault is a steeply dipping S-shaped strike-slip fault that cuts acoustic basement at depths greater than 8 km, whereas the west branch fault is a relatively shallow normal fault. The Tan-Lu fault zone is the key fault in the study area, having controlled its Cenozoic evolution. Based on balanced cross-sections constructed along transverse seismic line 99.8 and longitudinal seismic line 699.0, the Cenozoic evolution of the middle Tan-Lu fault zone is divided into three stages: Paleocene–Eocene transtension, Oligocene–Early Miocene transpression and Middle Miocene to present-day stable subsidence. The reasons for the contrasting tectonic features of the two branch faults and the timing of the change from transtension to transpression are discussed.     

Variation of palaeostress patterns along the Oriente transform wrench corridor, Cuba: significance for Neogene–Quaternary tectonics of the Caribbean realm

In this study, we address the late Miocene to Recent tectonic evolution of the North Caribbean (Oriente) Transform Wrench Corridor in the southern Sierra Maestra mountain range, SE Cuba. The region has been affected by historical earthquakes and shows many features of brittle deformation in late Miocene to Pleistocene reef and other shallow water deposits as well as in pre-Neogene, late Cretaceous to Eocene basement rocks. These late Miocene to Quaternary rocks are faulted, fractured, and contain calcite- and karst-filled extension gashes. Type and orientation of the principal normal palaeostress vary along strike in accordance with observations of large-scale submarine structures at the south-eastern Cuban margin. Initial N–S extension is correlated with a transtensional regime associated with the fault, later reactivated by sinistral and/or dextral shear, mainly along E–W-oriented strike-slip faults. Sinistral shear predominated and recorded similar kinematics as historical earthquakes in the Santiago region. We correlate palaeostress changes with the kinematic evolution along the boundary between the North American and Caribbean plates. Three different tectonic regimes were distinguished for the Oriente transform wrench corridor (OTWC): compression from late Eocene–Oligocene, transtension from late Oligocene to Miocene (?) (D₁), and transpression from Pliocene to Present (D₂–D₄), when this fault became a transform system. Furthermore, present-day structures vary along strike of the Oriente transform wrench corridor (OTWC) on the south-eastern Cuban coast, with dominantly transpressional/compressional and strike-slip structures in the east and transtension in the west. The focal mechanisms of historical earthquakes are in agreement with the dominant ENE–WSW transpressional structures found on land.     

Bouguer Gravity Anomaly in the Andean Orogenic Belt and its Dynamic Implications for Regional Tectonic Evolution

Calculated Bouguer gravity anomalies from the Andean orogenic belt interpreted as derived from regional gravity data to aid understanding of the lithospheric structure and tectonic evolution of the belt. These anomalies reveal lithospheric structures distributed throughout the belt, including linear and circular structures. NE-trending structures reflect sinistral transpression across the northern part of the belt, and NW-trending structures represent dextral transtension in the southern part. These results are supported by gravity-anomaly patterns that demonstrate mantle flow in a trench-parallel direction both northward and southward away from the stagnation band that is beneath the subducting Nazca slab. This mantle flow has served as an important driving force in the evolution of the Andean orogenic belt. Features of the modified tectonic model of the Andean orogenic belt are consistent with the spatial variation in and interpretation of Bouguer gravity anomalies.     

A structural synthesis of the Proterozoic Arabian-Nubian Shield in Egypt

Detailed structural geological and related studies were carried out in a number of critical areas in the Proterozoic basement of eastern Egypt to resolve the structural pattern at a regional scale and to assess the general characteristics of tectonic evolution, orogeny and terrane boundaries. Following a brief account of the tectonostratigraphy and timing of the orogenic evolution, the major structural characteristics of the critical areas are presented. Collisional deformation of the terranes ended about 615-600 Ma ago. Subsequent extensional collapse probably occurred within a relatively narrow time span of about 20 Ma (575 – 595 Ma ago) over the Eastern Desert and was followed by a further period of about 50 Ma of late to post-tectonic activity. The regional structures originated mainly during post-collisional events, starting with those related to extensional collapse (molasse basin formation, normal faulting, generation of metamorphic core complexes). Subsequent NNW-SSE shortening is documented by large-scale thrusting (towards the NNW) and folding, distributed over the Eastern Desert, although with variable intensity. Thrusts are overprinted by transpression, which was localized to particular shear zones. Early transpression produced, for example, the Allaqi shear zone and final transpression is documented in the Najd and Wadi Kharit-Wadi Hodein zones. Two terrane boundaries can be defined, the Allaqi and South Hafafit Sutures, which are apparently linked by the high angle sinistral strike-slip Wadi Kharit-Wadi Hodein shear zone with a tectonic transport of about 300 km towards the W/NW. In general, the tectonic evolution shows that extensional collapse is not necessarily the final stage of orogeny, but may be followed by further compressional and transpressional tectonism. The late Pan-African high angle faults were reactivated during Red Sea tectonics both as Riedel shears and normal faults, where they were oriented favourably with respect to the actual stress regime.     

青东凹陷复合型花状构造成因分析

青东凹陷内大型北西-北西西基底断层上发育一种结构特殊的花状构造——复合型花状构造,在凹陷内表现为构造高带,对油气成藏具有重要的控制作用。在三维地震剖面的解释和分析基础上,结合平面构造反射层资料的综合分析,发现其中的断层在平面上以右阶雁列式或平行式组合排列,剖面上基底主断层向上撒开并与多条次级断层组合成似花状构造。组成这些似花状构造的断层均为正断层,但其中的地层却表现为上拱的背形。根据断裂发育特点及区域构造应力演化特征对其进行成因分析,认为其形成是由于北西-北西西向基底断层在盆地南北向拉伸下的张扭性(斜向拉张)活动与古近纪末反转期压扭性活动叠加的结果。其形成过程经历了古近纪伸展期似负花状构造形成阶段和古近纪末反转期背形构造形成阶段。     

Neogene tectonic evolution of the Gulf of Hammamet area,Northeast Tunisia offshore

This paper discusses the Neogene tectonic evolution of the Tunisia offshore Gulf of Hammamet basin. Based on seismic and well data, this basin was created during the Miocene and is currently trending NE–SW. During the Neogene, the study area was affected by geodynamic interactions controlled simultaneously by convergence of the Eurasia and Africa plates and the opening of the Atlantic Ocean. These interactions generated compressive and extensional regimes which led to a variety of structures and basin inversions.The middle Miocene extensional regime created horst and graben structures (e.g. the Halk El Menzel graben). The two major compressive phases of the Tortonian and post Villafranchian age created different structures such as Ain Zaghouan and Fushia structures and the Jriba trough, and led to the reactivation of the old normal faults as reverse faults. During the Plio-Pleistocene and the Quaternary times, the Gulf of Hammamet was affected by an extensional regime related to the Siculo-Tunisian rift, which led to the development in the area of several sedimentary basins and new normal fault patterns.The Gulf of Hammamet shows several basins ranging in age from the Tortonian to the Quaternary, which display different structural and stratigraphic histories. Two main groups of sedimentary basins have been recognized. The first group has Tortonian–Messinian sedimentary fill, while the second group is largely dominated by Plio-Quaternary sediments. The shortening during the Tortonian and post Villafranchian times has led to the tectonic inversion of these basins. This shortening could be correlated to the Europe–Africa collision.Despite the large number of hydrocarbon discoveries, the Gulf of Hammamet remains under-explored, in particular at deeper levels. This study aims to guide future exploration and to highlight some new play concepts.     

Tectonic controls on post-subduction granite genesis and emplacement: The late Caledonian suite of Britain and Ireland

Rates of magma emplacement commonly vary as a function of tectonic setting. The late Caledonian granites of Britain and Ireland are associated with closure of the Iapetus Ocean and were emplaced into a varying regime of transpression and transtension throughout the Silurian and into the early Devonian. Here we evaluate a new approach for examining how magma volumes vary as a function of tectonic setting. Available radiometric ages from the late Caledonian granites are used to calculate probability density functions (age spectra), with each pluton weighted by outcrop area as a proxy for its volume. These spectra confirm an absence of magmatic activity during Iapetus subduction between c. 455 Ma and 425 Ma and a dominance of post-subduction magmas between c. 425 Ma and 380 Ma. We review possible reasons why, despite the widespread outcrop of the late Caledonian granites, magmatism appears absent during Iapetus subduction. These include shallow angle subduction or extensive erosion and tectonic removal of the arc.In contrast to previous work, we find no strong difference in the age or major element chemistry of post-subduction granites across all terranes. We propose a common causal mechanism in which the down-going Iapetus oceanic slab peeled back and detached beneath the suture following final Iapetus closure. The lithospheric mantle was delaminated beneath the suture and for about 100 km back beneath the Avalonian margin. While magma generation is largely a function of gravitationally driven lithosphere delamination, strike slip dominated kinematics in the overlying continental crust is what modulated granitic magma emplacement. Early Devonian (419–404 Ma) transtension permitted large volumes of granite emplacement, whereas the subsequent Acadian (late Early Devonian, 404–394 Ma) transpression reduced and eventually suppressed magma emplacement.     

Structural development of the Neogene Radicondoli–Volterra and adjoining hinterland basins in Western Tuscany (Northern Apennines,Italy)

This paper presents a geological–structural study of some Neogene hinterland basins of the Northern Apennines, located on the Tyrrhenian side of the chain. These basins developed on the already delineated thrust-fold belt from middle–late Tortonian times. Their evolution has been commonly referred to an extensional tectonic regime, related to the opening of the Tyrrhenian Sea. New data have allowed us to hypothesize a different tectonic evolution for the chain, where compressive tectonics plays a major role both in the external and in the hinterland area. In this frame, the hinterland area located west of a major outcropping crustal thrust (Mid-Tuscany Metamorphic Ridge) has been the target of a geological–structural investigation. The field mapping and structural analysis has been focused on the syntectonic sediments of the Radicondoli–Volterra basin as well as on adjoining minor basins. These basins commonly display a synclinal structure and are generally located in between basement culminations, probably corresponding to thrust anticlines. Sediments of the hinterland basins have been affected by compressive deformation and regional unconformities separate stratigraphic units due to the activity of basement thrusts. In the study area, normal faulting either accommodates the thrusting processes or post-dates compressive deformation. A chronology of faulting and a six-stage evolution of this area are presented, providing further insights for the Neogene tectonic evolution of the Northern Apennines. Copyright © 1998 John Wiley & Sons, Ltd.     

Genesis of folds in external zones: application of fault propagation fold model. Gafsa Basin example (southern central Tunisia)

The evolution of geological structures is related particularly to reactivation of preexisting fault, thus the importance of tectonic inheritance. Basing on stratigraphic and structural data in external zones leaving the example of Gafsa Basin (southern central Tunisia), we study the evolution of folds during tectonic phases. The structural and stratigraphic data prove that Gafsa Basin is subject for more than one tectonic phase where beginning by Cretaceous extension and reactivated by Atlasic compression. The combination of field results associated to that geomorphology confirms the application of “fault propagation model” as evolution mode of folds. The balanced of cross section, using numerical software Ramp E.M. 1.5.2, shows the importance of tectonic inheritance to interpret evolution of structures reliefs. The deformation increases related to reactivation of old normal fault. The most important deformation is observed in Jbal At Taghli presenting folds in the form of duplex resulted from conjugate activity of tear fault; it is the first interpretation of tear fault activity in surface in the scale of Tunisia. The application of fault propagation fold model to interpret fold genesis confirms the field data and proves the role of tectonic inheritance and reactivation of preexisting faults in the evolution of structures during different tectonic phases.     

From continental margin extension to collision orogen: structural development and tectonic rotation of the Hengchun peninsula, southern Taiwan

As a result of oblique collision, the Taiwan orogen propagates southward. The Hengchun peninsula in the southern tip of the Taiwan Central Range, preserving the youngest, the least deformed and the most complete accretionary prism sequences, allows therefore better understanding of the tectonic evolution of Taiwan orogen. On the Hengchun peninsula, four main stages of paleostress can be recognized by the analysis of brittle tectonics. After recording the first two stages of paleostress, rocks of the Hengchun peninsula (the Hengchun block) have undergone both tilting and counterclockwise rotation of about 90°. The structural boundaries of this rotated Hengchun block are: the Kenting Mélange zone in the southwest, the Fongkang Fault in the north, and a submarine backthrust in the east. The angle of this rotation is principally calculated by the paleomagnetic analysis data and a physical model experiment. Through a systematic back-tilting and back-rotating restoration, the original orientations of the four paleostress stages of Hengchun peninsula are recognized. They are, from the ancient to the recent, a NW–SE extension, a combination of NW–SE transtension and NE–SW transpression, a NE–SW compression, and finally a combination of NE–SW transtension and NW–SE transpression. This result can be explained by a phenomenon of stress axes permutation, instead of a complex polyphase tectonism. This stress axes permutation is caused by the horizontal compression increase accompanying the propagation of the accretionary prism. Combining the tectonic and paleomagnetic data with paleocurrent and stratigraphic data enables us to reconstruct the tectonic evolution of the Hengchun peninsula. This reconstruction corresponds to the deformation history of a continental margin basin, from its opening to its intense deformation in the accretionary prism.     

Displacement features associated with fault zones: a comparison between observed examples and experimental models

Fault zones commonly consist of discontinuous surfaces or are composed of different kinds of en echelon fractures (tension cracks, R or P-type fractures) which give the brittle shear zone a width. Translation along these faults and related features can occur by sliding on the elementary planes and/or by solution/deposition processes with opening of transtension zones and possible dilatation of the shear zone.In order to understand how fault planes develop and to investigate the mechanical conditions corresponding to natural configurations, displacement along an analogue fault model was examined under conditions of direct shear. The experimental fracture patterns were then compared with the natural features. The structural elements of certain faults created by testing, and showing transpression and transtension zones, were found to be similar to natural domino structures bounded by elementary shears, and could be compared with computed situations.It can be inferred that stresses are reoriented inside the shear zone; the angle between elementary fractures depends on their order of development; transpression and transtension zones occur systematically; and the shear zone undergoes dilatancy under low normal stresses.     

Andoma segment of southeastern margin of fennoscandian shield: Structure and evolution

The components of deformation related to endogenic (tectonic) and exogenic (glaciotectonic, gravitational sliding) factors are considered in the sedimentary platform cover by a study of Andoma dislocations in the Upper Devonian sedimentary rocks of the Lake Onega district. These structures are localized in the eponymous segment of the southeastern margin of the Fennoscandian (Baltic) Shield; indications of high tectonic activity are noted along this margin. As has been shown by a structural study, the development of the Andoma structure is caused by long-term (Late Devonian–Quaternary) multistage deformations related to tectonic factors and, to a lesser degree, glaciotectonics. The consecutive stages of synsedimentation normal faulting and landsliding, bedding-plane gliding, various forms of shear flow in a regime of transpression, glaciotectonic thrusting, and neotectonic transpression are recognized in the deformation history.     

Transcurrent continental tectonics model for the Ossa-Morena Zone Neoproterozoic–Paleozoic evolution,SW Iberian Massif,Portugal

The Ossa-Morena Zone (SW Iberian Massif) was affected by continuous orogen-parallel transcurrent continental tectonics from the Neoproterozoic to the Carboniferous times, involving transtension (TT) and transpression (TP) processes that co-existed together, occurred separately in neighbouring regions by the means of strain partitioning or even worked diachronically. A first stage of transpression TP1 took place during the Late Neoproterozoic–Lower Cambrian as a result of Cadomian arc-continent collisional processes. Structures generated by transtension TT1 from Cambrian to Lower Devonian were related to strong lithosphere stretching responsible for the development of basins controlled by major detachments, tilting, rifting and important tectono–thermal diachronic processes. Denudation phenomena and inhibition of sedimentation related with thermal uplift (asthenosphere upwelling) and consequent subsidence caused by isostatic equilibrium, involving generalized transgressions, were processes responsible for major unconformities. The Variscan TP2-TT2 episodes that followed diachronically TP1-TT1, by maintaining the orogen-parallel transport direction, were concomitant with syntectonic deposition of continental basins in the OMZ and foreland basins in the SPZ. TT2 local transtension and tectonic exhumation of deep crustal rocks along major shear zones, favoured the opening of tectonic troughs filled up by sediments and volcanism. TP2 shortening have generated fold axes parallel to the orogen-strike and composite dissymmetric flower structures.     

渤海湾中部中、新生代构造演化与潜山的形成

渤海湾盆地是华北克拉通东部的晚中—新生代断陷盆地,其东部为西太平洋活动大陆边缘,经历了多期不同性质的构造运动叠加。目前对渤海湾地区中—新生代的构造期次划分及各期次构造运动的应力状态的认识仍存在较大的争议。潜山是盆地沉积之前就已形成的基岩古地貌山,后被新地层覆盖而成,潜山内幕所保留的先存断裂及潜山与上覆盖层之间的接触关系为研究盆地构造运动提供了依据。本文以渤中19-6潜山构造为例,基于三维地震资料的精细解释、结合相干剖面及钻井资料进行系统构造解析,建立渤中19-6潜山构造演化新模型,并探讨了华北克拉通东缘的区域构造演化。研究结果表明:(1)渤中19-6潜山构造西部以一系列S-N向雁列式正断层为界,断层东侧为隆起的渤中19-6潜山构造,西侧为低洼的沙南凹陷。古潜山最早形成于晚三叠世,早白垩世形成如今以S-N向正断层为界的东隆西降的潜山构造格局;(2)渤中19-6潜山构造西部边界S-N向断裂以及上覆地层中存在的E-W向断裂为两侧大型走滑带间雁列式断裂构造,是该潜山构造储层形成的重要控制因素;(3)该潜山受华北板块与扬子板块剪刀式闭合碰撞和古太平洋板块NNW向俯冲的多重影响,中生代以来,共经历了印支早期挤压隆起、印支晚期伸展改造、燕山早期左行压扭改造、燕山中期左行伸展改造、燕山晚期左行压扭改造、喜山期右行伸展埋藏6个阶段的发育演化。     

长江中下游转换构造结与区域成矿背景分析

中国东部中生代以来的地壳运动频繁,构造演化复杂,岩浆活动剧烈,成矿作用多样,是不同体制构造转换的重要地区.长江中下游地区是中生代特提斯构造体制与太平洋构造体制转换的经典地区,是两大构造体制交汇和转换的焦点部位,具有岩石圈物质重组、结构重建的时-空演化关系.长江中下游转换构造结由是中国东部中生代特提斯构造体制与太平洋构造...     

A synthesis: Late Cenozoic stress field distribution at northeastern corner of the Eastern Mediterranean,SE Turkey

Fault kinematic analysis and inversion of focal mechanisms of shallow earthquakes reveal significant evolution of the regional stress regime in the northeastern most corner of the Eastern Mediterranean region since the Mio-Pliocene to the present time. This study was carried out in the interaction area between the Arabian/African plates and the Anatolian block. The evolution of stress regimes consists of a change from older transpression to younger transtension. Both strike-slip stress regimes having a NNW- to northwest-trending σ_Hmax (σ₁) and ENE- to northeast-trending σ_Hmin (σ₃) axes induce a sinistral component of displacement on the major intra-continental Karatas–Osmaniye and Misis–Ceyhan faults elongated with the northeast-trending Misis Range between Adana and Osmaniye provinces (sub-area i) and by a NNE-trending plate boundary Amanos fault running along Amanos Range between Antakya and Kahramanmaras provinces (sub-area ii). The inversion results show that the transtensional stress regime is dominantly strike-slip to extension, with an ENE- to northeast-trending σ_Hmin (σ₃) axis for sub-areas (i) and (ii), respectively. The inversions of earthquake focal mechanisms indicate that the transtensional stress regime is still active in the whole study area since probably recent Quaternary time. To cite this article: S. Over et al., C. R. Geoscience 336 (2004).     

Synorogenic basins of central Cuba and collision between the Caribbean and North American plates

The synorogenic basins of central Cuba formed in a collision-related system. A tectono-stratigraphic analysis of these basins allows us to distinguish different structural styles along the Central Cuban Orogenic Belt. We recognize three distinct structural domains: (1) the Escambray Metamorphic Complex, (2) the Axial Zone, and (3) the Northern Deformation Belt. The structural evolution of the Escambray Metamorphic Complex includes a latest Cretaceous compressional phase followed by a Palaeogene extensional phase. Contraction created an antiformal stack in a subduction environment, and extension produced exhumation in an intra-arc setting. The Axial Zone was strongly deformed and shortened from the latest Cretaceous to Eocene. Compression occurred in an initial phase and subsequent transpressive deformation took place in the middle Eocene. The Northern Deformation Belt consists of a thin-skinned thrust fault system formed during the Palaeocene to middle Eocene; folding and faulting occurred in a piggyback sequence with tectonic transport towards the NNE. In the Central Cuban Orogenic Belt, some major SW–NE structures are coeval with the Cuban NW–SE striking folds and thrusts, and form tectonic corridors and/or transfer faults that facilitated strain-partitioning regime attending the collision. The shortening direction rotated clockwise during deformation from SSW–NNE to WSW–ENE. The synchronicity of compression in the north with extension in the south is consistent with the opening of the Yucatan Basin; the evolution from compression–extension to transpression is in keeping with the increase in obliquity in the collision between the Caribbean and North American plates.     

Late Cretaceous Transpressional Fault System: A Case Study of the Yishu Fault Belt, Shandong Province, Eastern China

On the basis of field observations of the structures of three profiles from the Linshu region, deformation characteristics and the tectonic background of the Yishu fault belt in the Late Cretaceous–Early Cenozoic have been discussed in detail.Three structural profiles, whose deformations consist mainly of earlier transpressional faults and later normal faults, were developed for the Mengtuan Formation of the Lower Cretaceous Dasheng Group.Typical positive flower structures, duplex structures, and break-through faults were found in these profiles.On the basis of analyses of the structural deformation and previous geochronological studies, it was concluded that the earlier transpressional faults of the profiles were triggered by the sinistral transpression of the Yishu fault belt in the Late Cretaceous–Early Paleogene, and that the later normal faults, formed during the Late Paleogene–Neogene extension, truncated the earlier transpressional faults.With consideration of the tectonic evolution of the Tan-Lu fault belt and the different drift directions of the Pacific plate since the Cretaceous, we suggest that the major tectonic events of the Late Cretaceous–Neogene in eastern China were mainly controlled by the subduction of the Pacific plate.     

鄂尔多斯盆地周边地带新构造演化及其区域动力学背景

系统研究了松辽盆地泰康地区青山口组沉积相类型及沉积特征.对其中青一段与青二、三段的沉积相平面分布与垂向演化规律做了较深入的探讨.青山口组主要发育湖泊相与三角洲相2种沉积相类型,湖泊相包括2种亚相与4种微相,三角洲相包括2种亚相和2种微相.青一段以深湖、半深湖相泥岩沉积为特征,青二、三段以浅湖相与三角洲相砂泥岩互层为特征.区内青山口组主要存在3种类型的储层砂体,分别为三角洲前缘河口坝砂体、三角洲前缘远砂坝砂体和浅湖砂体,其中浅湖砂体是最好的含油砂体,浅湖砂体发育的优势区也即浅湖沉积亚相发育区是区内最重要的油气富集区,是今后油气勘探的有利地区