Model studies of physical properties of mineral matter in high-pressure-temperature experiments

Data derived from experimental model studies of the elastic properties of rocks of various compositions under high pressures and temperatures inherent in the thermobaric regimes of the upper lithosphere are generalized. The geophysical implications of the data are discussed. New results of experimental studies of the electrical characteristics of metamorphic rocks of ultrabasic composition at P ? 20 kbar and T ? 1000°C are presented.     

An introduction to ultrahigh-pressure metamorphism

Abstract Ultrahigh-pressure (UHP) metamorphism refers to mineralogical and structural readjustment of supracrustal protoliths and associated mafic-ultramafic rocks at mantle pressures greater than ∼ 25 kbar (80-90 km). Typical products include metapelite, quartzite, marble, granulite, eclogite, paragneiss and orthogneiss; minor mafic and ultramafic rocks occur as eclogitic-ultramafic layers or blocks of various dimensions within the supracrustal rocks. For appropriate bulk compositions, metamorphism at great depths produces coesite, microdiamond and other characteristic UHP minerals with unusual compositions. Thus far, at least seven coesite-bearing eclogitic terranes and three diamond-bearing UHP regions have been documented. All lie within major continental collision belts in Eurasia, have similar supracrustal protoliths and metamorphic assemblages, occur in long, discontinuous belts that may extend several hundred kilometers or more, and typically are associated with contemporaneous high-P blueschist belts. This paper defines the P-T regimes of UHP metamorphism and describes mineralogical, petrological and tectonic characteristics for a few representative UHP terranes including the western gneiss region of Norway, the Dora Maira massif of the western Alps, the Dabie Mountains and the Su-Lu region of east-central China, and the Kokchetav massif of the former USSR. Prograde P-T paths for coesite-bearing eclogites require abnormally low geothermal gradients (approximately 7°C/km) that can be accomplished only by subduction of cold, oceanic crust-capped lithosphere ± pelagic sediments or an old, cold continent. The preservation of coesite inclusions in garnet, zircon, omphacite, kyanite and epidote, and microdiamond inclusions in garnet and zircon during exhumation of an UHP terrane requires either an extraordinarily fast rate of denudation (up to 10 cm/year) or continuous refrigeration in an extensional regime (retreating subduction zone).     

Overview of the geology, petrology and tectonic framework of the high-pressure–ultrahigh-pressure metamorphic belt of the Kokchetav Massif, Kazakhstan

Abstract High‐ to ultrahigh‐pressure metamorphic (HP–UHPM) rocks crop out over 150 km along an east–west axis in the Kokchetav Massif of northern Kazakhstan. They are disposed within the Massif as a 2 km thick, subhorizontal pile of sheet‐like nappes, predominantly composed of interlayered pelitic and psammitic schists and gneisses, amphibolite and orthogneiss, with discontinuous boudins and lenses of eclogite, dolomitic marble, whiteschist and garnet pyroxenite. On the basis of predominating lithologies, we subdivided the nappe group into four north‐dipping, fault‐bounded orogen‐parallel units (I–IV, from base to top). Constituent metabasic rocks exhibit a systematic progression of metamorphic grades, from high‐pressure amphibolite through quartz–eclogite and coesite–eclogite to diamond–eclogite facies. Coesite, diamond and other mineral inclusions within zircon offer the best means by which to clarify the regional extent of UHPM, as they are effectively sequestered from the effects of fluids during retrogression. Inclusion distribution and conventional geothermobarometric determinations demonstrate that the highest grade metamorphic rocks (Unit II: T = 780–1000°C, P = 37–60 kbar) are restricted to a medial position within the nappe group, and metamorphic grade decreases towards both the top (Unit III: T = 730–750°C, P = 11–14 kbar; Unit IV: T = 530°C, P = 7.5–9 kbar) and bottom (Unit I: T = 570–680°C; P = 7–13.5 kbar). Metamorphic zonal boundaries and internal structural fabrics are subhorizontal, and the latter exhibit opposing senses of shear at the bottom (top‐to‐the‐north) and top (top‐to‐the‐south) of the pile. The orogen‐scale architecture of the massif is sandwich‐like, with the HP–UHPM nappe group juxtaposed across large‐scale subhorizontal faults, against underlying low P–T metapelites (Daulet Suite) at the base, and overlying feebly metamorphosed clastic and carbonate rocks (Unit V). The available structural and petrologic data strongly suggest that the HP–UHPM rocks were extruded as a sequence of thin sheets, from a root zone in the south toward the foreland in the north, and juxtaposed into the adjacent lower‐grade units at shallow crustal levels of around 10 km. The nappe pile suffered considerable differential internal displacements, as the 2 km thick sequence contains rocks exhumed from depths of up to 200 km in the core, and around 30–40 km at the margins. Consequently, wedge extrusion, perhaps triggered by slab‐breakoff, is the most likely tectonic mechanism to exhume the Kokchetav HP–UHPM rocks.     

Reply to comments of R. Løvlie and T. Torsvik concerning “bioturbation: minimal effects on the magnetic fabric of some natural and experimental sediments”

The evolution of organic matter, silicate and fluid phases in cover units of the three structural zones of the Vanoise area allows one to distinguish differentP-T cooling paths. These paths depend on whether the cover has been transported (western and northern Vanoise) or not (southern Vanoise). All units first underwent a common high-pressure, low-temperature (HP-LT) metamorphic stage (300°C; 6 kbar) of blueschist type (Fe/Mg carpholite-chloritoid facies). The cover units transported on the extermal, colder zone (coal measure series metamorphosed in albite-chlorite facies), preserved their HP mineralogy (Fe/Mg carpholite, lawsonite) and organic matter content (oils, wet gases and kerogen) while the unit which remained in contact with its more thermally conductive basement (polymetamorphic) now shows extensive greenschist facies overprinting (breakdown of Fe/Mg carpholite and lawsonite, appearance of chlorite, pyrophyllite, chloritoid and clinozoisite; absence of oils and wet gases). These two tectonic evolutions might serve as a more general model for the preservation of HP-LT mineral assemblages.     

Petrology and phase equilibrium of newly found eclogites from Kekesu Valley in eastern part of southwest Tianshan HP-UHP metamorphic belt, China, and its tectonic significance

Eclogites and omphacite-bearing blueschists have been newly found in the eastern segment of the southwest Tianshan orogenic belt,Xinjiang,northwest China.After detailed petrological study,three samples including one fresh eclogite TK003,one blueschist sample TK026-8 and one retrograded eclogite TK027,were selected for phase equilibrium modeling under NC(K)MnFMASHO(N2O-CaO-K2O-MnO-FeO-MgO-Al2O3-SiO2-H2O-O)system,by thermocalc 3.33 software.Composition analyses of garnets in these three samples show typical growth zoning with Xpy and Xgrs increasing,Xspss decreasing from core to rim.Pseudosection modeling of the garnet zonation reflects that the eclogites and blueschist experienced a similar P-T evolution trajectory,with a near iso-baric heating in the early stage,and reached eclogite facies metamorphic field with peak P-T regime of 480–515°C,2.00–2.30 GPa.Subsequently the rocks experienced an early iso-thermal decompression retrograde stage with P-T conditions of 515–519°C,1.78–1.93 GPa.Variations of mineralogy and modes of these rocks are probably due to different retrograde paths as a consequence of different bulk-rock composition,as well as a variation in fluid activity during exhumation.P-T calculation and a peak geothermal gradient of 6–7°C/km indicate HP rocks in the Kekesu Valley experienced cold subducted eclogite facies metamorphism.Thus a huge oceanic subduction eclogite facies metamorphic belt in southwest Tianshan has been recognized,extending from the Kekesu Valley in the east to the Muzhaerte Valley in the west for nearly200 km.However,UHP evidence has not been found in the Kekesu terrane,perhaps because the slab in east part of southwest Tianshan did not subduct into such a great depth.     

Contrasting zoning profiles in high-grade garnets: evidence for the allochthonous nature of a Grenville province terrane

In the central part of the Grenville Province, Proterozoic metasediments of the Réservoir Cabonga Terrane arc underlain by gently dipping Archean migmatites. A major mylonite zone, located within the migmatites, is the base of a large thrust sheet made up of the Réservoir Cabonga Terrane and a migmatitic sole. Garnets from meta-aluminous assemblages in Proterozoic metasediments, mylonites and migmatites display contrasting types of Ca zoning patterns. Garnets with Ca-rich cores are found along the western edge of the Réservoir Cabonga Terrane, whereas garnets with flat Ca profiles are found in the remaining Proterozoic metapelites, in the mylonites and in the Archean migmatites. Considering samples in which an infinite reservoir of Ca ions is warranted by abundant plagioclase in the matrix, pressures well in excess of 1200 MPa, at temperatures between 700° and 800°C are indicated for a metamorphic event recorded in the cores of garnets from the western edge of the Réservoir Cabonga Terrane. The inner rim of garnet records pressures of around 1000 MPa for the same temperature range. In homogeneous garnets, a single P-T set, around 800 MPa and 750°C, is recorded in the migmatites. Some of the mylonites initiate their recrystallization under relatively high pressures, which is continued during decompression, and record the lowest P-T values. These metamorphic signatures suggest that the Proterozoic metapelites were already metamorphosed under relatively high pressure when emplaced on to Archean migmatites and that the entire area was subsequently subjected to metamorphism at a lower pressure.     

The role of sphene as an accessory phase in the high-pressure partial melting of hydrous mafic compositions

In a high-pressure experimental study of reactions and possible melt products occurring in the deep continental crust or in subducted oceanic crust, sphene has been identified over a pressure range of 10–18 kbar and to temperatures of 1020°C. Sphene may be a refractory phase with up to 60% partial melting for hydrous mafic compositions. Sphene breaks down at lower pressure than the maximum pressure stability of amphibole in hydrous mafic compositions, and rutile rather than sphene is the important Ti-bearing accessory phase at pressures greater than 16–18 kbar. Sphene and rutile coexist to pressures as low as 14 kbar. This implies that amphibole eclogites containing primary sphene and no rutile have most likely formed at depths less than 45 km.The presence of minor sphene as a residual phase in equilibrium with low-Ti silicic liquids may have a marked effect on the REE distribution in derivative liquids. Thus melts in equilibrium with a garnet and sphene-bearing residuum may have less light-REE-enriched patterns than those predicted when garnet is a residual phase without coexisting sphene. This effect is modelled using REE patterns for sphenes from high-grade metamorphic terrains of western Norway.Both the new REE data and the experimental study have important implications for the genesis of low-Ti magmas formed in continental margins and island arcs.     

Comparison and interpretation of graphitization in contact and regional metamorphic rocks

Abstract X-ray diffraction (XRD) analyses of carbonaceous materials were carried out in conjunction with petrological studies for selected metamorphic rocks in order to compare the structural state of carbonaceous materials between contact and regional metamorphic rocks. The most extensive study was done for the Daimonji contact aureole in the eastern part of Kyoto city, Japan. The Daimonji contact aureole can be divided into three mineral zones using mineral parageneses of pelitic rocks: chlorite, biotite and cordierite zones. The cordierite zone can be further subdivided into lower- and higher-grade subzones. Petrological considerations allow the two isograd reactions that define the lower- and higher-grade cordierite subzones to be determined and suggest these reactions occurred at 510–560°C and 560–590°C per 2.0-2.3 kbar, respectively. A combination of the petrological studies and the XRD data of carbonaceous materials suggest that fully ordered graphite (FG; defined by d(002) ≤ 3.360 Å following the convention used by many workers), appears around 560–590°C in the Daimonji contact aureole. This data and refinement of geothermometer for published data confirmed that the FG appears at 400–500°C in regional metamorphic rocks, but at higher than 530°C in contact aureoles. One possible explanation for such a temperature difference is the duration of heating. However, the width at half height (WH) of the graphite peak attains a similar value of 0.30° at around 500°C both in contact and regional metamorphic rocks, suggesting that WH value is a more reliable indicator of metamorphic grade than the change of d(002) value. Furthermore, the depressed d(002) data of graphite was observed locally in the higher grade part (≥ 500°C) of the Ryoke regional metamorphic belt, where granitic intrusions exist within a few km distance. These facts indicate that the duration of heating is not an important factor controlling the change of d(002) value. It is possible that interlayered impurities, such as chlorine, which was derived from igneous intrusions, may be an important factor in suppressing the reduction in d(002) at temperatures greater than 500°C.     

Elastic properties of polycrystalline diopside (CaMgSi2O6)

A polycrystalline specimen of clinopyroxene diopside has been hot-pressed at P = 15 kbar and T = 850°C in a piston-cylinder apparatus. Compressional (ν_P) and shear (ν_S) velocities are determined as a function of pressure to 7.5 kbar at room temperature by an ultrasonic pulse transmission technique. The velocities at 7.5 kbar are ν_P = 8.06 km/sec and ν_S = 4.77 km/sec. These data are consistent with velocity-density trends for orthopyroxenes due to the compensating effects of the monoclinic structure (positive) and Ca content (negative). With the addition of the new data for diopside, it is possible to calculate directly the velocities of various upper-mantle mineral assemblages.     

Early Archaean granulite-facies metamorphism south of Ameralik,West Greenland

Relict high-pressure granulite-facies rocks have been found in the Ami?tsoq gneisses and inclusions of the older Akilia supracrustal association, on islands south of Godthåb. Only amphibolite-facies assemblages have been found in Ameralik dykes and younger rocks from this area. The Ami?tsoq gneisses are depleted in Rb and U relative to those of Ameralik and Isua. Well-fitted Pb/Pb and Rb-Sr isochrons on Ami?tsoq granulites indicate that this depletion, correlated with the granulite-facies metamorphism, occurred ca. 3600 Ma ago. Textural features suggest that the present cpx + opc + gnt + plag + qtz + hbl assemblages evolved from earlierintermediate-P assemblages (cpx + opx + plag), probably during cooling from the metamorphic peak. Re-equilibrium of olderintermediate-P assemblages in local environments of low ?_H2O, during the ca. 2800-Ma metamorphism of the Malene supracrustals, is feasible but is considered unlikely. Either interpretation requires crustal thickness of at least 20 km and geothermal gradients of?30°C/km, ca.3600Ma ago. The higher heat production of early Archaean times was apparently dissipated through oceanic, rather than continental, areas.     

Eclogitic metapelites in the western segment of the north Qaidam Mountains: Evidence on “in situ” relationship between eclogite and its country rock

In Yuka-Luofengpo area of the north Qaidam Mountains, eclogitic metapelites are recognized. The metapelites enclosed lenses of eclogites, and locally intercalated with eclogites. Their typical mineral assemblages are garnet+kyanite+chloritoid+phengite+quartz+rutile. Strong growth zoning is preserved in garnets of metapelites, and phengite contains up to 3.4 Si per formula units. The petrographic observations and textural relations testify to the following sequence of mineral assemblages connected to three metamorphic stage: (1) Grt+ChlI+CldI +PheI ± StI+Qtz; (2) Grt+Ky+PheII±CldII+Qtz; and (3) Grt+CldIII+ChlII+PheIII+StII ± ky+ Qtz. Applying THERMOCALC Program, Grt-Phe thermometer and Grt-Ky-Phe-Qtz barometry, P-T conditions for three metamorphic stages were obtained: P=1.07±0.31GPa, T=564±22? (prograde stage); P=2.3–3.1GPa, T=615–700°C-(peak stage); and P =1.22 ± 0.26GPa, T=581±20°C (retrograde stage). A hairpin shape P-T path similar to that of adjacent eclogite is inferred. In combination with eclogitic mineral relics in marbles and orthogneisses enclosing eclogites, we thought that the relationship between eclogites and country rocks is “in situ” rather than “tectonic emplacement”.     

Crustal seismic structure and depth distribution of earthquakes in the Archean Kuusamo region,Fennoscandian Shield

Two-dimensional crustal velocity models are derived from passive seismic observations for the Archean Karelian bedrock of north-eastern Finland. In addition, an updated Moho depth map is constructed by integrating the results of this study with previous data sets. The structural models image a typical three-layer Archean crust, with thickness varying between 40 and 52 km. P wave velocities within the 12–20 km thick upper crust range from 6.1 to 6.4 km/s. The relatively high velocities are related to layered mafic intrusive and volcanic rocks. The middle crust is a fairly homogeneous layer associated with velocities of 6.5–6.8 km/s. The boundary between middle and lower crust is located at depths between 28 and 38 km. The thickness of the lower crust increases from 5–15 km in the Archean part to 15–22 km in the Archean–Proterozoic transition zone. In the lower crust and uppermost mantle, P wave velocities vary between 6.9–7.3 km/s and 7.9–8.2 km/s. The average V_p/V_s ratio increases from 1.71 in the upper crust to 1.76 in the lower crust.The crust attains its maximum thickness in the south-east, where the Archean crust is both over- and underthrust by the Proterozoic crust. A crustal depression bulging out from that zone to the N–NE towards Kuusamo is linked to a collision between major Archean blocks. Further north, crustal thickening under the Salla and Kittilä greenstone belts is tentatively associated with a NW–SE-oriented collision zone or major shear zone. Elevated Moho beneath the Pudasjärvi block is primarily explained with rift-related extension and crustal thinning at ∼2.4–2.1 Ga.The new crustal velocity models and synthetic waveform modelling are used to outline the thickness of the seismogenic layer beneath the temporary Kuusamo seismic network. Lack of seismic activity within the mafic high-velocity body in the uppermost 8 km of crust and relative abundance of mid-crustal, i.e., 14–30 km deep earthquakes are characteristic features of the Kuusamo seismicity. The upper limit of seismicity is attributed to the excess of strong mafic material in the uppermost crust. Comparison with the rheological profiles of the lithosphere, calculated at nearby locations, indicates that the base of the seismogenic layer correlates best with the onset of brittle to ductile transition at about 30 km depth.We found no evidence on microearthquake activity in the lower crust beneath the Archean Karelian craton. However, a data set of relatively well-constrained events extracted from the regional earthquake catalogue implies a deeper cut-off depth for earthquakes in the Norrbotten tectonic province of northern Sweden.     

Complex origin for the south-western Zamboanga metamorphic basement complex, Western Mindanao, Philippines

Abstract Amphibolites unconformably overlain by a metasedimentary sequence of quartz-muscovite-feldspar-kyanite schists, metagraywackes and epidote-bearing amphibolites occur in the northern portion of the south-western Zamboanga metamorphic basement complex, western Mindanao. These amphibolites (here identified as the Mount Dansalan amphibolites) display relict magmatic textures inherited from cumulate gabbro protoliths. Bulk-rock major and trace-element data are consistent with this hypothesis. Together with the chemistry of relict igneous clinopyroxenes, they indicate a magmatic arc-related signature for the gabbro protoliths. Geochemical data allow us to identify various sources for the associated metasediments: the gabbro themselves for the metagraywackes and a continental basement for the quartz-muscovite-feldspar-kyanite schists. Both sources contributed to the genesis of the epidote-amphibolite metasediments. The compositions of the metamorphic mineral assemblages suggest that the rocks have undergone metamorphism at temperatures ranging from 550°C to 700°C and pressures probably in the range of 5–9 kbar. ⁴⁰K–⁴⁰Ar isotopic study of amphibole separates from the Mount Dansalan samples document a metamorphic event dated at 24.6 ± 1.4, 22.2 ± 1.4 and 21.2 ± 1.2 Ma. Our results are in agreement with plate tectonic models which describe the south-western Zamboanga metamorphic basement as a continental terrane. However, its evolution was not as simple as it was usually considered. In particular the basement incorporated slivers of magmatic arc crust, which cannot be unambiguously related to any of the Tertiary arcs documented in the area.     

Complex Archean lower crustal structure revealed by COCORP crustal reflection profiling in the Wind River Range,Wyoming

A COCORP deep crustal reflection profile across the Wind River uplift crosses exposed Archean rocks and resolves an unusual complex deep crustal structure at a depth of 24–31 km in an area where depth relations in Precambrian rocks can be inferred. The different levels of exposure across the beveled plunge of the Wind River uplift reveal supracrustal rocks at shallower levels with migmatites and pyroxene granulites at deeper levels. For the first time, deep crustal structure from reflection profiling may be interpreted in terms of exposed basement geology. A folded, multilayered deep structure shown by relfection data resembles multiply folded pyroxene granulite interlayered with granitic gneiss exposed in the central Wind River uplift; isoclinal folding is suggested in the folded layered seismic structure. Earlier seismic reflection studies suggested a simpler lower crust. These data indicate that lower crustal structure may have a complexity similar to deeply eroded Precambrian granulite-facies rocks. If this seismic feature represents folded metamorphic rocks, it seems unlikely that this Archean crust could have been thickened by underplating after 2.7 b.y. B.P. and the crust would have to be at least 30 km thich when this structure was formed.     

Petrological and seismic studies of the lithosphere in the earthquake swarm region Vogtland/NW Bohemia,central Europe

New petrological and geochemical data of upper mantle and lower crustal xenoliths from a Quaternary tephra deposit in Mýtina, Czech Republic, are discussed in the frame of previous geophysical results (receiver functions, reflection seismology) of the western Eger/Ohře Rift area. The Vogtland/NW Bohemia region is well known for intraplate earthquake swarms, which are usually associated with volcanic activity. As previously reported, ³He/⁴He data of CO₂ emissions in mofettes and mineral-water springs point at ongoing magmatic processes in this area. Using teleseismic P receiver functions, an approximately 40-km-wide Moho updoming (from 31 to 27 km) and indications for a seismic discontinuity at 50 to 60 km depth were observed beneath the active CO₂-degassing field. The studied xenolith suite probes a lithospheric profile within the structural and gas geochemical anomaly field of the western Eger Rift.With regard to texture, composition, p–T estimates and origin, five xenolith groups can be discriminated. Upper crustal xenoliths (quartzites, phyllites, mica schists) resemble crystalline country rocks at surface. One noritic xenolith (6 kbar, 800 °C) could represent a sample of the lower crust. Clinopyroxenites and hornblendites probably represent cumulates of the nephelinitic magma or fragments of magmatic veins. Porous wehrlites and one hornblende peridotite xenolith reflect a metasomatied upper mantle. Megacrysts of Ti-rich amphibole, olivine, clinopyroxene, and phlogopite could be fragments of pegmatitic veins or high-pressure phenocrysts. Most of the ultramafic nodules (xenoliths and megacrysts) formed at pressures between 6 and 11 kbar (22 to 38 km depth), at temperatures well above regional geotherms of the Bohemian Massif calculated from surface heat flow studies. Orthopyroxene-bearing spinel-lherzolite xenoliths were not observed. Our petrographical, geochemical, and thermobarometric results indicate a lithospheric mantle strongly altered by magmatic processes. This metasomatism can cause slower than typical uppermost-mantle seismic velocities in a greater area and might help to explain observed seismic anomalies.     

Rayleigh Wave Group Velocity Tomography of Siberia, China and the Vicinity

—Rayleigh waves are used in a tomographic inversion to obtain group velocity maps of East Asia (40° E–160° E and 20° N–70° N). The period range studied is 30 to 70 seconds. Seismograms used for this study were recorded at CDSN stations, at a temporary broadband seismic array in Tibet, at several SRO stations, and Kirnos-equipped stations established in Asia by the former Soviet Union, in Siberia, in the Sakhalin and in Mongolia. Altogether more than 1200 paths were available in the tomographic inversion. The study area includes the Angara craton, the geologically ancient core of Asia, and the subsequently accreted units, the Altaids (a Paleozoic collision complex), the Sino-Korean platform (a chain of Archaen terranes separated by belts of active structures), the south China platform (a collage of Precambrian, Paleozoic and Mesozoic metamorphic and igneous terranes), as well as the Tibetan plateau (an active tectonic feature created in late Cenozoic through collision of the Indian subcontinent and the Asian continent). Many of these main units are recognizable in the tomographic images as distinctive units; Tibet appears as a prominent low velocity (about ?15% from the average) structure, with western and central Tibet often appearing as the areas with the lowest velocities, the Central Asian fold-belt, and the Angara craton are consistently high group velocity areas. Some lesser tectonic features are also recognizable. For example, Lake Baikal is seen as a high velocity feature at periods greater than 40 seconds. However, the high group velocity feature does not stop near the southern end of Lake Baikal; it extends south-southwestward across Mongolia. The North China Plain, a part of the platform where extensional tectonics dominate, is an area of high velocities as a result of relatively thin crust. The south China block, the least tectonically active region of China, is generally an area of high velocity. For periods longer than 40 seconds, a NNE trending high group velocity gradient clearly exists in eastern China; the velocities are noticeably higher in the east. From the group velocity maps, average dispersion curves at twelve locations were determined and inverted to obtain velocity structures. Main results of group velocity inversion include: (1) a Tibetan crust of around 60?km thick, with low crustal and upper mantle shear velocities, at 3.3?km/s and 4.2?km/s, respectively; (2) with the Moho constrained at 40–43?km, the Angara craton and the Central Asian foldbelt have a V _S in excess of 4.6?km/s; (3) relatively low shear velocities are obtained for tectonically active areas. In many parts of the study area, where Precambrian basement is exposed, the process in the crust and upper mantle due to recent tectonic activities have modified the crust and upper mantle velocity structures under the Precambrian terranes, they are no longer underlain by high velocity crust and mantle.     

Orthopyroxene–cordierite mafic gneiss from the Nomamisaki metamorphic rocks,Southern Kyushu,Japan: Implication for western continuation of the Usuki–Yatsushiro Tectonic Line

We describe an orthopyroxene–cordierite mafic gneiss from the Nomamisaki metamorphic rocks in the Noma Peninsula, southern Kyushu, Japan. The mineral assemblage of the gneiss is orthopyroxene, cordierite, biotite, plagioclase, and ilmenite. Thermometry based on the Fe–Mg exchange reaction between orthopyroxene and biotite yields a peak metamorphic temperature of 680°C. The stability of cordierite relative to garnet, quartz, and sillimanite defines the upper limit of the peak metamorphic pressure as 4.4 kbar. These features indicate that the Nomamisaki metamorphic rocks underwent low‐pressure high‐temperature type metamorphism. Although a chronological problem still remains, the Nomamisaki metamorphic rocks can be regarded as a western continuation of the Higo Belt. The Usuki–Yatsushiro Tectonic Line, which delineates the southern border of the Higo Belt, is therefore located on the east of the Nomamisaki metamorphic rocks in southern Kyushu.     

Crustal Architecture of the Inverted Central Lapland Rift Along the HUKKA 2007 Profile

We have studied the lateral velocity variations along a partly buried inverted paleo–rift in Central Lapland, Northern Europe with a 2D wide-angle reflection and refraction experiment, HUKKA 2007. The experiment was designed to use seven chemical explosions from commercial and military sites as sources of seismic energy. The shots were recorded by 102 stations with an average spacing of 3.45 km. Two-dimensional crustal models of variations in P-wave velocity and Vp/Vs-ratio were calculated using the ray tracing forward modeling technique. The HUKKA 2007 experiment comprises a 455 km long profile that runs NNW–SSE parallel to the Kittilä Shear Zone, a major deformation zone hosting gold deposits in the area. The profile crosses Paleoproterozoic and reactivated Archean terranes of Central Lapland. The velocity model shows a significant difference in crustal velocity structure between the northern (distances 0–120 km) and southern parts of the profile. The difference in P-wave velocities and Vp/Vs ratio can be followed through the whole crust down to the Moho boundary indicating major tectonic boundaries. Upper crustal velocities seem to vary with the terranes/compositional differences mapped at the surface. The lower layer of the upper crust displays velocities of 6.0–6.1 km/s. Both Paleoproterozoic and Archean terranes are associated with high velocity bodies (6.30–6.35 km/s) at 100 and 200–350 km distances. The Central Lapland greenstone belt and Central Lapland Granitoid complex are associated with a 4 km-thick zone of unusually low velocities (<6.0 km/s) at distances between 120 and 220 km. We interpret the HUKKA 2007 profile to image an old, partly buried, inverted continental rift zone that has been closed and modified by younger tectonic events. It has structural features typical of rifts: inward dipping rift shoulders, undulating thickness of the middle crust, high velocity lower crust and a rather uniform crustal thickness of 48 km.     

Scapolite phenocrysts in a latite dome,northwest Arizona,U.S.A.

A latite dome in northwest Arizona contains a rare occurrence of primary SO₄-rich scapolite phenocrysts. The total phenocryst assemblage consists of plagioclase (An₂₀?An₃₃), hornblende, biotite, and scapolite (Me₆₈). Microphenocrysts include allanite and oxidized low-Ti magnetite. Electron microprobe analyses show that the scapolite contains about 1.74 wt.% S, which indicates an atomic S/(S + C) of 0.58. Although scapolite occurs in xenoliths in volcanic rocks and diatremes, as well as a metamorphic mineral in granulites, its occurrence as a primary igneous mineral is extremely rare.Ca-rich scapolite has been crystallized experimentally by others from melts with a wide range of SiO₂, CaO, and Na₂O contents, at temperatures above 825°C and pressures ranging from 3 to 15 kbar. Comparison of scapolite from this latite with synthetic scapolite crystallized from nepheline syenite melt suggests that the Arizona phenocrysts crystallized under conditions of 850 to 900°C, 3–6 kbar total pressure, and unusually high ?_CO2 and ?_SO2. The rarity of scapolite as a phenocryst mineral suggests that high partial pressures of CO₂ and SO₂ are rare in the magmatic environment.     

Elastic properties of anorthite and the nature of the lunar crust

A polycrystalline specimen of anorthite has been hot-pressed atP = 15kbar andT = 1000°C in a piston-cylinder apparatus. Compressional(ν_p)and shear(ν_s) velocities are determined as a function of pressure to 7.5 kbar at room temperature by an ultrasonic pulse transmission technique. The specimen is less than 0.5% porous and is elastically isotropic within 1%. The velocities at 7.5 kbar areν_p = 7.29km/secandν_s = 3.85km/sec. These data are consistent with those for most terrestrial and lunar plagioclase rocks but not for certain anisotropic rocks and single crystals. The measured velocities demonstrate, moreover, that it is impossible to distinguish between rocks of gabbro, anorthositic gabbro, or anorthosite compositions for the 20–55 km layer of the lunar crust on the basis of seismic data alone. The mean composition of the crust could well be that of a gabbro (17% Al₂O₃) rather than of an anorthositic gabbro(～25%Al₂O₃) as assumed in some current models.