Sedimentary architecture of detached deep‐marine canyons: Examples from the East Coast Basin of New Zealand

Submarine canyons are conduits for the distribution of sediment across continental margins. Although many canyons connect directly with fluvial or marine littoral system feeders, canyons detached from direct hinterland supply are also recognized. The fill of detached canyons remains enigmatic, because their deep‐water setting restricts analysis of their evolution and stratigraphic architecture. Therefore, this study aims to investigate the sedimentary processes that infilled deep‐water canyons and the resulting architecture. Miocene outcrops of an exhumed deep‐water system from the East Coast Basin, New Zealand, are documented and compared with the morphology and seismic scale architecture of a modern detached canyon system on the same convergent margin. The outcropping system preserves the downstream margin of a sub‐basin deposited at palaeo‐water depths >700 m. A 6 km wide by 430 m deep incision is filled by heterogeneous siliciclastic sediments, 50% of which comprise graded thin‐beds with traction structures, interpreted to result from oscillatory flows. These are intercalated with concave‐up lenses, up to 15 m thick, of sigmoidally‐bedded, amalgamated sandstones, which preserve ripple casts on bed bases, interpreted as deposits at the head of a deep‐marine canyon. Palaeo‐flow was eastward, into the sub‐basin margin. On the adjacent margin of the sub‐basin down‐dip, stacked and amalgamated sandstones and conglomerates represent the fill of a submarine channel complex, at least 3 km wide. The channels are inferred to have been fed by the up‐dip canyon, which traversed the intervening structural high; similar relationships are seen in the bathymetry data. Seismic studies on this margin demonstrate that multiple phases of canyon cut and fill may occur, with downstream architectural evolution comparable to that seen at outcrop, demonstrating that detached canyons may act as sediment conduits. Breaching of developing sea‐floor structures by detached canyons can modify tortuous sediment pathways, supplying sediment to otherwise starved areas of the slope.     

Late Triassic volcanic activity in South-East Asia: New stratigraphical,geochronological and paleontological evidence from the Luang Prabang Basin (Laos)

In South-East Asia, sedimentary basins displaying continental Permian and Triassic deposits have been poorly studied. Among these, the Luang Prabang Basin (North Laos) represents a potential key target to constrain the stratigraphic and structural evolutions of South-East Asia. A combined approach involving sedimentology, palaeontology, geochronology and structural analysis, was thus implemented to study the basin. It resulted in a new geological map, in defining new formations, and in proposing a complete revision of the Late Permian to Triassic stratigraphic succession as well as of the structural organization of the basin. Radiometric ages are used to discuss the synchronism of volcanic activity and sedimentation.The Luang Prabang Basin consists of an asymmetric NE-SW syncline with NE-SW thrusts, located at the contact between Late Permian and Late Triassic deposits. The potential stratigraphic gap at the Permian–Triassic boundary is therefore masked by deformation in the basin. The Late Triassic volcaniclastic continental deposits are representative of alluvial plain and fluvial environments. The basin was fed by several sources, varying from volcanic, carbonated to silicic (non-volcanic). U–Pb dating of euhedral zircon grains provided maximum sedimentation ages. The stratigraphic vertical succession of these ages, from ca. 225, ca. 220 to ca. 216 Ma, indicates that a long lasting volcanism was active during sedimentation and illustrates significant variations in sediment preservation rates in continental environments (from ∼100 m/Ma to ∼3 m/Ma). Anhedral inherited zircon grains gave older ages. A large number of them, at ca. 1870 Ma, imply the reworking of a Proterozoic basement and/or of sediments containing fragments of such a basement. In addition, the Late Triassic (Carnian to Norian) sediments yielded to a new dicynodont skull, attributed to the Kannemeyeriiform group family, from layers dated in between ∼225 and ∼221 Ma (Carnian).     

Seismic stratigraphy and development of Avon canyon in Benin (Dahomey) basin, southwestern Nigeria

Interpretation of a grid of high resolution seismic profiles from the offshore eastern part of the Benin (Dahomey) basin in southwestern Nigeria area permitted the identification of cyclic events of cut and fill associated with the Avon canyon. Seismic stratigraphic analysis was carried out to evaluate the canyon morphology, origin and evolution. At least three generations of ancient submarine canyons and a newly formed submarine canyon have been identified. Seismic reflection parameters of the ancient canyons are characterized by transparent to slightly transparent, continuous to slightly discontinuous, high to moderate amplitude and parallel to sub-parallel reflections. Locally, high amplitude and chaotic reflections were observed. The reflection configurations consist of regular oblique, chaotic oblique, progradational and parallel to sub-parallel types. These seismic reflection characteristics are probably due to variable sedimentation processes within the canyons, which were affected by mass wasting. Canyon morphological features include step-wise and spoon-shaped wall development, deep valley incision, a V-shaped valley, similar orientation in the southeast direction, and simple to complex erosion features in the axial floor. The canyons have a composite origin, caused partly by lowering of the sea level probably associated with the formation of the Antarctic Ice Sheet about 30 Ma ago and partly by complex sedimentary processes. Regional correlation with geological ages using the reflectors show that the canyons cut through the Cretaceous and lower Tertiary sediments while the sedimentary infill of the canyon is predominantly Miocene and younger. Gravity-driven depositional processes, downward excavation by down slope sediment flows, mass wasting from the canyon walls and variation in terrigenous sediment supply have played significant roles in maintaining the canyons. These canyons were probably conduits for sediment transport to deep-waters in the Gulf of Guinea during their period of formation.     

Marine geophysical evidence for former expansion and flow of the Greenland Ice Sheet across the north‐east Greenland continental shelf

High‐resolution swath bathymetry and TOPAS sub‐bottom profiler acoustic data from the inner and middle continental shelf of north‐east Greenland record the presence of streamlined mega‐scale glacial lineations and other subglacial landforms that are formed in the surface of a continuous soft sediment layer. The best‐developed lineations are found in Westwind Trough, a bathymetric trough connecting Nioghalvfjerdsfjorden Gletscher and Zachariae Isstrøm to the continental shelf edge. The geomorphological and stratigraphical data indicate that the Greenland Ice Sheet covered the inner‐middle shelf in north‐east Greenland during the most recent ice advance of the Late Weichselian glaciation. Earlier sedimentological and chronological studies indicated that the last major delivery of glacigenic sediment to the shelf and Fram Strait was prior to the Holocene during Marine Isotope Stage 2, supporting our assertion that the subglacial landforms and ice sheet expansion in north‐east Greenland occurred during the Late Weichselian. Glacimarine sediment gravity flow deposits found on the north‐east Greenland continental slope imply that the ice sheet extended beyond the middle continental shelf, and supplied subglacial sediment direct to the shelf edge with subsequent remobilisation downslope. These marine geophysical data indicate that the flow of the Late Weichselian Greenland Ice Sheet through Westwind Trough was in the form of a fast‐flowing palaeo‐ice stream, and that it provides the first direct geomorphological evidence for the former presence of ice streams on the Greenland continental shelf. The presence of streamlined subglacially derived landforms and till layers on the shallow AWI Bank and Northwind Shoal indicates that ice sheet flow was not only channelled through the cross‐shelf bathymetric troughs but also occurred across the shallow intra‐trough regions of north‐east Greenland. Collectively these data record for the first time that ice streams were an important glacio‐dynamic feature that drained interior basins of the Late Weichselian Greenland Ice Sheet across the adjacent continental margin, and that the ice sheet was far more extensive in north‐east Greenland during the Last Glacial Maximum than the previous terrestrial–glacial reconstructions showed. Copyright © 2008 John Wiley & Sons, Ltd.     

Mio-Pliocene basin development in the eastern part of the Cappadocian Volcanic Province (Central Anatolia,Turkey) and its implications for regional tectonics

The Cappadocian Volcanic Province (CVP) comprises predominantly of a thick succession of volcanogenic rocks and interbedded siliciclastic sediments of Middle Miocene to Recent age in Central Anatolia, Turkey. The conditions of basin development in the eastern part of the CVP have been elucidated by using sedimentological and geomorphological approaches. The prevailing tectonic regime, its extent and causes are also discussed. Sedimentological analysis supported by geomorphological observations revealed a major NE-trending probably normal, border fault and its several synthetics. This tectonic element constitutes the SE margin of the basin and divided the CVP from the Tauride range during Middle Miocene to Pliocene. The basin fill in the study area comprises gravelly alluvial fans near the border fault, while fluvial clastics and lacustrine carbonates dominate towards the centre. Some pyroclastic rocks and lava flows are also made part of the fill. The southeastern basin margin is characterized morphologically by a number of uplifted basement blocks, probably associated with synthetic faults, and some deeply incised canyons in the footwall. These canyons were subsequently filled with a Mid-Pliocene ignimbrite sheet, and represent the sediment supply conduits to the basin. The cessation of filling in the basin was determined by strike-slip faults that uplifted and detached the basin about 2.6 Ma. This date also marks the onset of the neotectonic period in the region. The overall extensional tectonic regime inferred for the eastern CVP appears coeval with events recognised in the southern basins, i.e. Adana and Mut Basins and the eastern Mediterranean. Some physical connections between these basins also have been demonstrated. It is suggested that the CVP and the southern basins were all created during a phase of extension resulting from continued northward subduction of the African plate beneath the Eurasia during the Late Cenozoic.     

Cenozoic development of northern Svalbard based on thermochronological data

Northern Svalbard represents a basement high surrounded by the Norwegian‐Greenland Sea/Fram Strait, Eurasian Basin, the Barents Shelf and the onshore Central Tertiary Basin (CTB). Published apatite fission track (AFT) data indicate Mesozoic differential, fault‐controlled uplift and exhumation of the region. Thermal history modelling of published and new AFT and (U–Th–Sm)/He ages of 51–153 Ma in the context of regional stratigraphy and geomorphology implies at least two, possibly three, uplift and exhumation stages since late Mesozoic, separated by episodes of subsidence and sediment deposition. Late Cretaceous/Palaeocene exhumation and subsequent burial appear to be related with the transition of compressional to transpressional collision of Svalbard and Greenland during the Eurekan Orogeny. Renewed exhumation since the Oligocene probably results from passive margin formation after the separation of Svalbard and Greenland, when a new offshore sedimentary basin opened west of Svalbard. Final uplift since the Miocene eventually re‐exposed the palaeosurface of northern Svalbard.     

川西松潘-甘孜弧前盆地的形成及演化

地处柴南缘昆中蛇绿杂岩带与羌塘地块北缘可可西里-金沙江古缝合线之间的松潘-甘孜褶皱带(包括东昆仑构造带),其主体应属古特提斯洋晚石炭世-晚三叠世时期向其北侧的柴达木古陆南缘俯冲过程中在活动陆缘弧-沟间隙之间增生形成的一个大型弧前构造带。具有由弧前盆地沉积楔和基底增生杂岩构成的双重结构特点,其形成与冈瓦纳大陆北缘若尔盖"三角"地块的楔入及俯冲带向南迁移有关。大致经历了晚石炭世-早三叠世狭窄弧前盆地和中晚三叠世宽阔弧前盆地两个主要演化阶段。     

Sedimentary structures and sediment transport across the continental slope of Israel from piston core studies

The continental terrace of Israel consists of Nile-derived sediments. They are classified into three major groups, according to their structures: (1) irregularly to wavy laminated, coarse-grained sediments (quartz and skeletal debris) of the flat outer shelf and upper bend of the slope (10–20% of the bulk) which are influenced by currents. These sediments are bioturbated to various degrees. Smectitic silty clays (80–90%) form two structural groups: (2) laminated, turbiditic sediments which accumulate on the slope, particularly in the canyons of the northern slope. Irregular, wavy, thickly laminated, coarse-grained sediments of the upper slope and canyon heads merge downslope with parallel, thinly laminated, fine-grained sediments. Toward the foot of the slope and on the adjacent deep-sea floor lamination becomes indistinct and the sediment is visually homogeneous. (3) Slump-generated mud lumps of various size which accumulate on the lower slope and along the transport axes of the canyons. These are the most visible evidence for large-scale slumping mass movement. Transportational and depositional processes are far more intensive over the steep northern continental slope of Israel, and especially in its canyons than over the gentle southern slope. Very stiff overconsolidated sediments unconformably overlain by the ubiquitous recent silty-clayey sediment were cored on steep sections of the middle continental slope and along the canyon walls. Their preconsolidation stress values suggest that these sections were formerly overlain by more than 40 m of sediment and now are exposed by slumping. The downsliding slabs usually disintegrated into small fragments although several huge fragments could be identified along the canyon axes.     

Structural Evolution and Hydrocarbon Potential of the Upper Paleozoic Northern Ordos Basin, North China

The hydrocarbon potential of the Hangjinqi area in the northern Ordos Basin is not well known, compared to the other areas of the basin, despite its substantial petroleum system.Restoration of a depth-converted seismic profile across the Hangjinqi Fault Zone(HFZ) in the eastern Hangjinqi area shows one compression that created anticlinal structures in the Late Triassic, and two extensions in ~Middle Jurassic and Late Early Cretaceous, which were interrupted by inversions in the Late Jurassic–Early Early Cretaceous and Late Cretaceous, respectively.Hydrocarbon generation at the well locations in the Central Ordos Basin(COB) began in the Late Triassic.Basin modeling of Well Zhao-4 suggests that hydrocarbon generation from the Late Carboniferous–Early Permian coal measures of the northern Shanbei Slope peaked in the Early Cretaceous, predating the inversion in the Late Cretaceous.Most source rocks in the Shanbei Slope passed the main gas-migration phase except for the Hangjinqi area source rocks(Well Jin-48).Hydrocarbons generated from the COB are likely to have migrated northward toward the anticlinal structures and traps along the HFZ because the basin-fill strata are dipping south.Faulting that continued during the extensional phase(Late Early Cretaceous) of the Hangjinqi area probably acted as conduits for the migration of hydrocarbons.Thus, the anticlinal structures and associated traps to the north of the HFZ might have trapped hydrocarbons that were charged from the Late Carboniferous–Early Permian coal measures in the COB since the Middle Jurassic.     

Late Permian–early Middle Triassic back-arc basin development in West Qinling,China

The Late Permian–early Middle Triassic strata of the northern West Qinling area, northeastern Tibetan Plateau, are composed of sediment gravity flow deposits. Detailed sedimentary facies analysis indicates these strata were deposited in three successive deep-marine environments. The Late Permian–early Early Triassic strata of the Maomaolong Formation and the lowest part of the Longwuhe Formation define a NW–SE trending proximal slope environment. Facies of the Early Triassic strata composing the middle and upper Longwuhe Formation are consistent with deposition in a base-of-slope apron environment, whereas facies of the Middle Triassic Anisian age Gulangdi Formation are more closely associated with a base-of-slope fan depositional environment. The lithofacies and the spatial–temporal changes in paleocurrent data from these strata suggest the opening of a continental margin back-arc basin system during Late Permian to early Middle Triassic time in the northern West Qinling. U–Pb zircon ages for geochemically varied igneous rocks with diabasic through granitic compositions intruded into these deep-marine strata range from 250 to 234 Ma. These observations are consistent with extensional back-arc basin development and rifting between the Permian–Triassic Eastern Kunlun arc and North China block during the continent–continent collision and underthrusting of the South China block northward beneath the Qinling terrane of the North China block. Deep-marine sedimentation ended in the northern West Qinling by the Middle Triassic Ladinian age, but started in the southern West Qinling and Songpan-Ganzi to the south. We attribute these observations to southward directed rollback of Paleo-Tethys oceanic lithosphere, continued attenuation of the West Qinling on the upper plate, local post-rift isostatic compensation in the northern West Qinling area, and continued opening of a back-arc basin in the southern West Qinling and Songpan-Ganzi. Rollback and back-arc basin development during Late Permian to early Middle Triassic time in the West Qinling area explains: the truncated map pattern of the Eastern Kunlun arc, the age difference of deep-marine sediment gravity flow deposits between the Late Permian–early Middle Triassic northern West Qinling and the late Middle Triassic–Late Triassic southern West Qinling and Songpan-Ganzi, and the discontinuous trace of ophiolitic rocks associated with the Anyemaqen-Kunlun suture.     

Turbidite system architecture and sedimentary processes along topographically complex slopes: the Makran convergent margin

This study investigates the morphology and Late Quaternary sediment distribution of the Makran turbidite system (Makran subduction zone, north‐west Indian Ocean) from a nearly complete subsurface mapping of the Oman basin, two‐dimensional seismic and a large set of coring data in order to characterize turbidite system architecture across an active (fold and thrust belt) margin. The Makran turbidite system is composed of a dense network of canyons, which cut into high relief accreted ridges and intra‐slope piggyback basins, forming at some locations connected and variably tortuous paths down complex slopes. Turbidite activity and trench filling rates are high even during the Holocene sea‐level highstand conditions. In particular, basin‐wide, sheet‐like thick mud turbidites, probably related to major mass wasting events of low recurrence time, drape the flat and unchannellized Oman abyssal plain. Longitudinal depth profiles show that the Makran canyons are highly disrupted by numerous thrust‐related large‐scale knickpoints (with gradients up to 20° and walls up to 500 m high). At the deformation front, the strong break of slope can lead to the formation of canyon‐mouth ‘plunge pools’ of variable shapes and sizes. The plunge pools observed in the western Makran are considerably larger than those previously described in sub‐surface successions; the first insights into their internal architecture and sedimentary processes are presented here. Large plunge pools in the western Makran are associated with large scoured areas at the slope break and enhanced sediment deposition downstream: high‐amplitude reflectors are observed inside the plunge pools, while their flanks are composed of thin‐bedded, fine‐grained turbidites deposited by the uppermost part of the turbidity flows. Thus, these architectural elements are associated with strong sediment segregation leading to specific trench‐fill mechanisms, as only the finer‐grained component of the flows is transferred to the abyssal plain. However, the Makran accretionary prism is characterized by strong along‐strike variability in tectonics and fluvial input distribution that might directly influence the turbidite system architecture (i.e. canyon entrenchment, plunge pool formation or channel development at canyon mouths), the sedimentary dynamics and the resulting sediment distribution. Channel formation in the abyssal plain and trench‐fill characteristics depend on the theoretical ‘equilibrium’ conditions of the feeder system, which is related closely to the balance between erosion rates and tectonic regime. Thus, the Makran turbidite system constitutes an excellent modern analogue for deep‐water sedimentary systems with structurally complex depocentres, in convergent margin settings.     

Stratigraphic and structural evolution of the Blue Nile Basin,Northwestern Ethiopian Plateau

The Blue Nile Basin, situated in the Northwestern Ethiopian Plateau, contains ∼1400 m thick Mesozoic sedimentary section underlain by Neoproterozoic basement rocks and overlain by Early–Late Oligocene and Quaternary volcanic rocks. This study outlines the stratigraphic and structural evolution of the Blue Nile Basin based on field and remote sensing studies along the Gorge of the Nile. The Blue Nile Basin has evolved in three main phases: (1) pre‐sedimentation phase, include pre‐rift peneplanation of the Neoproterozoic basement rocks, possibly during Palaeozoic time; (2) sedimentation phase from Triassic to Early Cretaceous, including: (a) Triassic–Early Jurassic fluvial sedimentation (Lower Sandstone, ∼300 m thick); (b) Early Jurassic marine transgression (glauconitic sandy mudstone, ∼30 m thick); (c) Early–Middle Jurassic deepening of the basin (Lower Limestone, ∼450 m thick); (d) desiccation of the basin and deposition of Early–Middle Jurassic gypsum; (e) Middle–Late Jurassic marine transgression (Upper Limestone, ∼400 m thick); (f) Late Jurassic–Early Cretaceous basin‐uplift and marine regression (alluvial/fluvial Upper Sandstone, ∼280 m thick); (3) the post‐sedimentation phase, including Early–Late Oligocene eruption of 500–2000 m thick Lower volcanic rocks, related to the Afar Mantle Plume and emplacement of ∼300 m thick Quaternary Upper volcanic rocks. The Mesozoic to Cenozoic units were deposited during extension attributed to Triassic–Cretaceous NE–SW‐directed extension related to the Mesozoic rifting of Gondwana. The Blue Nile Basin was formed as a NW‐trending rift, within which much of the Mesozoic clastic and marine sediments were deposited. This was followed by Late Miocene NW–SE‐directed extension related to the Main Ethiopian Rift that formed NE‐trending faults, affecting Lower volcanic rocks and the upper part of the Mesozoic section. The region was subsequently affected by Quaternary E–W and NNE–SSW‐directed extensions related to oblique opening of the Main Ethiopian Rift and development of E‐trending transverse faults, as well as NE–SW‐directed extension in southern Afar (related to northeastward separation of the Arabian Plate from the African Plate) and E–W‐directed extensions in western Afar (related to the stepping of the Red Sea axis into Afar). These Quaternary stress regimes resulted in the development of N‐, ESE‐ and NW‐trending extensional structures within the Blue Nile Basin. Copyright © 2008 John Wiley & Sons, Ltd.     

Detrital zircon U–Pb ages of Late Triassic–Late Jurassic deposits in the western and northern Sichuan Basin margin: constraints on the foreland basin provenance and tectonic implications

Upper Triassic to Upper Jurassic strata in the western and northern Sichuan Basin were deposited in a synorogenic foreland basin. Ion–microprobe U–Pb analysis of 364 detrital zircon grains from five Late Triassic to Late Jurassic sandstone samples in the northern Sichuan Basin and several published Middle Triassic to Middle Jurassic samples in the eastern Songpan–Ganzi Complex and western and inner Sichuan Basin provide an initial framework for understanding the Late Triassic to Late Jurassic provenance of western and northern Sichuan Basin. For further understanding, the paleogeographic setting of these areas and neighboring hinterlands was constructed. Combined with analysis of depocenter migration, thermochronology and detrital zircon provenance, the western and northern Sichuan Basin is displayed as a transferred foreland basin from Late Triassic to Late Jurassic. The Upper Triassic Xujiahe depocenter was located at the front of the Longmen Shan belt, and sediments in the western Sichuan Basin shared the same provenances with the Middle–Upper Triassic in the Songpan–Ganzi Complex, whereas the South Qinling fed the northern Sichuan Basin. The synorogenic depocenter transferred to the front of Micang Shan during the early Middle Jurassic and at the front of the Daba Shan during the middle–late Middle Jurassic. Zircons of the Middle Jurassic were sourced from the North Qinling, South Qinling and northern Yangtze Craton. The depocenter returned to the front of the Micang Shan again during the Late Jurassic, and the South Qinling and northern Yangtze Craton was the main provenance. The detrital zircon U–Pb ages imply that the South and North China collision was probably not finished at the Late Jurassic.     

Paleozoic and Mesozoic Basement Magmatisms of Eastern Qaidam Basin,Northern Qinghai‐Tibet Plateau: LA‐ICP‐MS Zircon U‐Pb Geochronology and its Geological Significance

The eastern margin of the Qaidam Basin lies in the key tectonic location connecting the Qinling, Qilian and East Kunlun orogens. The paper presents an investigation and analysis of the geologic structures of the area and LA-ICP MS zircon U-Pb dating of Paleozoic and Mesozoic magmatisms of granitoids in the basement of the eastern Qaidam Basin on the basis of 16 granitoid samples collected from the South Qilian Mountains, the Qaidam Basin basement and the East Kunlun Mountains. According to the results in this paper, the basement of the basin, from the northern margin of the Qaidam Basin to the East Kunlun Mountains, has experienced at least three periods of intrusive activities of granitoids since the Early Paleozoic, i.e. the magmatisms occurring in the Late Cambrian (493.1±4.9 Ma), the Silurian (422.9±8.0 Ma-420.4±4.6 Ma) and the Late Permian-Middle Triassic (257.8±4.0 Ma-228.8±1.5 Ma), respectively. Among them, the Late Permian - Middle Triassic granitoids form the main components of the basement of the basin. The statistics of dated zircons in this paper shows the intrusive magmatic activities in the basement of the basin have three peak ages of 244 Ma (main), 418 Ma, and 493 Ma respectively. The dating results reveal that the Early Paleozoic magmatism of granitoids mainly occurred on the northern margin of the Qaidam Basin and the southern margin of the Qilian Mountains, with only weak indications in the East Kunlun Mountains. However, the distribution of Permo-Triassic (P-T) granitoids occupied across the whole basement of the eastern Qaidam Basin from the southern margin of the Qilian Mountains to the East Kunlun Mountains. An integrated analysis of the age distribution of P-T granitoids in the Qaidam Basin and its surrounding mountains shows that the earliest P-T magmatism (293.6-270 Ma) occurred in the northwestern part of the basin and expanded eastwards and southwards, resulting in the P-T intrusive magmatism that ran through the whole basin basement. As the Cenozoic basement thrust system developed in the eastern Qaidam Basin, the nearly N-S-trending shortening and deformation in the basement of the basin tended to intensify from west to east, which went contrary to the distribution trend of N-S-trending shortening and deformation in the Cenozoic cover of the basin, reflecting that there was a transformation of shortening and thickening of Cenozoic crust between the eastern and western parts of the Qaidam Basin, i.e., the crustal shortening of eastern Qaidam was dominated by the basement deformation (triggered at the middle and lower crust), whereas that of western Qaidam was mainly by folding and thrusting of the sedimentary cover (the upper crust).     

Seismic stratigraphy and the sedimentation history in the Laxmi Basin of the eastern Arabian Sea: Constraints from IODP Expedition 355

Detailed interpretation of seismic stratigraphic sequences in the Laxmi Basin of the eastern Arabian Sea are presented in this study using closely spaced high resolution multi-channel seismic (MCS) data. Our stratigraphic interpretation is further corroborated using recent drilling results in the Laxmi Basin, derived from the long sediment cores collected during International Ocean Discovery Program (IODP) Expedition 355. Integrated core-log interpretation discussed in the present study, offer important insights about the lithostratigraphic variations in this region. Analyses of multi-channel seismic reflection data reveal five depositional sequences (ranging from Paleocene to Recent) that led to the development of this marginal basin since the Cenozoic period. Regional igneous basement is successfully imaged, which was also validated by deep sea coring during the IODP Expedition 355. In the present study, we primarily focus on the post-rift sedimentation in the Laxmi Basin and its possible mechanisms. Our detailed interpretation in the prevailing tectonic framework of the basin suggests that near-shelf oldest volcaniclastic sedimentation immediately overlying the acoustic basement is linked to the onset of India–Madagascar and India–Seychelles rifting activities during the Late Cretaceous period. Eventually, during the Early-Mid to Late Miocene, the basin received maximum sedimentation dominantly through an extensive mass transport mechanism implying possible large-scale deformation on the Indian shelf. Subsequent sediment input to the basin appears to have been fed variably via the Indus Fan as well as coastal discharge from the Indian mainland. The total sediment thickness in the Laxmi Basin ranges from 1.1 to 3.5 km. New stratigraphic information and sediment isopach maps presented here provide vital information about syn- and post-rift sedimentation pattern in the region and their long term tectonic implications.     

鄂尔多斯盆地西部晚三叠世构造属性探讨

有关鄂尔多斯盆地西部晚三叠世的构造属性问题,前人的观点大多认为该时期为(类)前陆盆地,笔者对此提出置疑,主要有3个方面的依据:首先,对西缘汝箕沟、石沟驿和崆峒山地区晚三叠世延长组的3套粗碎屑沉积进行了重新认识。汝箕沟延长组确实为边缘相沉积,但其附近层位板内玄武岩的出现,表明该区晚三叠世为拉张环境下的沉积。最新研究表明,石沟驿地区延长组沉积厚度并不大,不超过1500m。崆峒山砾岩沉积可能受西南部的秦祁造山带影响所致,不能作为盆地西部沉积的代表。其次,通过编制晚三叠世延长组地层等厚图及一系列东西向地层剖面对比,发现该时期以往认为的盆地西部从南至北的巨厚沉降带并不存在。最后,通过地震剖面、平衡剖面和裂变径迹测试数据分析,指出西部现今存在的横山堡后冲构造带和马家滩大型逆冲推覆构造带并未形成于晚三叠世,其最早形成于晚侏罗世。故鄂尔多斯盆地西部晚三叠世构造属性并非为前陆盆地,而是残延克拉通内叠合盆地的组成部分。该认识对盆地西部的油气勘探具有重要意义。     

Salt redistribution during extension and inversion inferred from 3D backstripping

A 3D backstripping approach considering salt flow as a consequence of spatially changing overburden load distribution, isostatic rebound and sedimentary compaction for each backstripping step is used to reconstruct the subsidence history in the Northeast German Basin. The method allows to determine basin subsidence and the salt-related deformation during Late Cretaceous–Early Cenozoic inversion and during Late Triassic–Jurassic extension. In the Northeast German Basin, the deformation is thin-skinned in the basinal part, but thick-skinned at the basin margins. The salt cover is deformed due to Late Triassic–Jurassic extension and Late Cretaceous–Early Cenozoic inversion whereas the salt basement remained largely stable in the basin area. In contrast, the basin margins suffered strong deformation especially during Late Cretaceous–Early Cenozoic inversion. As a main question, we address the role of salt during the thin-skinned extension and inversion of the basin. In our modelling approach, we assume that the salt behaves like a viscous fluid on the geological time-scale, that salt and overburden are in hydrostatical near-equilibrium at all times, and that the volume of salt is constant. Because the basement of the salt is not deformed due to decoupling in the basin area, we consider the base of the salt as a reference surface, where the load pressure must be equilibrated. Our results indicate that major salt movements took place during Late Triassic to Jurassic E–W directed extension and during Late Cretaceous–Early Cenozoic NNE–SSW directed compression. Moreover, the study outcome suggests that horizontal strain propagation in the salt cover could have triggered passive salt movements which balanced the cover deformation by viscous flow. In the Late Triassic, strain transfer from the large graben systems in West Central Europe to the east could have caused the subsidence of the Rheinsberg Trough above the salt layer. In this context, the effective regional stress did not exceed the yield strength of the basement below the Rheinsberg Trough, but was high enough to provoke deformation of the viscous salt layer and its cover. During the Late Cretaceous–Early Cenozoic phase of inversion, horizontal strain propagation from the southern basin margin into the basin can explain the intensive thin-skinned compressive deformation of the salt cover in the basin. The thick-skinned compressive deformation along the southern basin margin may have propagated into the salt cover of the basin where the resulting folding again was balanced by viscous salt flow into the anticlines of folds. The huge vertical offset of the pre-Zechstein basement along the southern basin margin and the amount of shortening in the folded salt cover of the basin indicate that the tectonic forces responsible for this inversion event have been of a considerable magnitude.     

Isotopic constraints on crustal architecture and Permo‐Triassic tectonics in New Guinea: Possible links with eastern Australia

New U–Pb zircon ages and Sr–Nd isotopic data for Triassic igneous and metamorphic rocks from northern New Guinea help constrain models of the evolution of Australia's northern and eastern margin. These data provide further evidence for an Early to Late Triassic volcanic arc in northern New Guinea, interpreted to have been part of a continuous magmatic belt along the Gondwana margin, through South America, Antarctica, New Zealand, the New England Fold Belt, New Guinea and into southeast Asia. The Early to Late Triassic volcanic arc in northern New Guinea intrudes high‐grade metamorphic rocks probably resulting from Late Permian to Early Triassic (ca 260–240 Ma) orogenesis, as recorded in the New England Fold Belt. Late Triassic magmatism in New Guinea (ca 220 Ma) is related to coeval extension and rifting as a precursor to Jurassic breakup of the Gondwana margin. In general, mantle‐like Sr–Nd isotopic compositions of mafic Palaeozoic to Tertiary granitoids appear to rule out the presence of a North Australian‐type Proterozoic basement under the New Guinea Mobile Belt. Parts of northern New Guinea may have a continental or transitional basement whereas adjacent areas are underlain by oceanic crust. It is proposed that the post‐breakup margin comprised promontories of extended Proterozoic‐Palaeozoic continental crust separated by embayments of oceanic crust, analogous to Australia's North West Shelf. Inferred movement to the south of an accretionary prism through the Triassic is consistent with subduction to the south‐southwest beneath northeast Australia generating arc‐related magmatism in New Guinea and the New England Fold Belt.     

渤海湾盆地基岩地质图及其所包含的构造运动信息

利用油气勘探资料编制的渤海湾盆地基岩地质图 ,分析了基岩露头分布及其反映的中、新生代构造运动特征。基岩地质图显示渤海湾盆地基底岩层受印支运动和燕山运动影响发育有一系列近EW向、NNE—NE向的褶皱和逆断层等挤压构造变形。基岩露头展布表明渤海湾盆地西部、北部在侏罗纪之前的剥蚀作用明显强于东部和南部地区。基岩地层形成的区域褶皱轴向及各亚构造层之间的不整合面接触关系反映出在下—中三叠统沉积之后至下—中侏罗统沉积之前的某个“关键时刻”渤海湾地区发生了一次重要的构造变革 ,导致早期的近EW向构造被NNE—NE向构造替代。而从区域应力体制来看 ,下—中侏罗统沉积之后渤海湾地区的区域构造环境发生了重要变化 ,从中生代早期的挤压构造环境变为以裂陷作用为主的构造演化时期     

Sediment dispersal system in the Taiwan–South China Sea collision zone along a convergent margin: A comparison with the Papua New Guinea collision zone of the western Solomon Sea

Through a large-scale examination of the morpho-sedimentary features on sea floors in the Taiwan–Luzon convergent margin, we determined the main sediment dispersal system which stretches from 23°N to 20°N and displays as an aligned linear sediment pathway, consisting of the Penghu Canyon, the deep-sea Penghu Channel and northern Manila Trench. The seafloor of South China Sea north of 21°N are underlain by a triangle-shaped collision marine basin, resulting from oblique collision between the Luzon Arc and Chinese margin, and are mainly occupied by two juxtaposed slopes, the South China Sea and Kaoping Slopes, and a southward tilting basin axis located along the Penghu Canyon. Two major tributary canyons of the Formosa and Kaoping and small channels and gullies on both slopes join into the axial Penghu Canyon and form a dendritic canyon drainage system in this collision marine basin. The canyon drainage system is characteristic of lateral sediment supply from flank slopes and axial sediment transport down-canyon following the tilting basin axis. The significance of the collision marine basin in term of source to sink is that sediments derived from nearby orogen and continental margins are transported to and accumulated in the collision basin, serving as a temporary sediment sink and major marine transport route along the basin axis. The comparison of the Taiwan–South China Sea collision zone with the Papua New Guinea collision zone of the western Solomon Sea reveals remarkable similarities in tectonic settings and sedimentary processes that have resulted in similar sediment dispersal systems consisting of (1) a canyon drainage network mainly in the collision basin and (2) a longitudinal sediment transport system comprising a linear connection of submarine canyon, deep-sea channel and oceanic trench beyond the collision marine basin.