Deformation style in the Munsiari Thrust Zone: a study in the Madlakia–Munsiari–Dhapa section in north-eastern Kumaun Himalaya

The Main Central Thrust demarcates the boundary between the Lesser Himalaya and the Higher Himalaya in the Himalayan orogen. Several definitions of the Main Central Thrust have been proposed since it was originally described as the southern boundary of the crystalline rocks (the Main Central Thrust mass) in the Kumaun-Garhwal Himalaya. The long-held contention that the Munsiari Thrust represents the Main Central Thrust has been negated by recent isotopic studies. One way to define the Main Central Thrust is that it is a ductile shear zone that is delimited by the Munsiari Thrust (MCT-I) in south and the Vaikrita Thrust (MCT-II) in north. The alternative proposition that the Vaikrita Thrust represents the Main Central Thrust is fraught with practical limitations in many parts of the Himalaya, including the study area. In the metamorphic rocks bounded between the Vaikrita Thrust and the Munsiari Thrust, the isoclinal folds of the earliest phase are routinely ascribed to the pre-Himalayan orogeny, whereas all subsequent folding phases are attributed to the Himalayan orogeny. This article elucidates the structural characteristics of the kilometre-thick Munsiari Thrust Zone and revisits the issue of pre-Himalayan orogenic signatures in the thrust zone. With the help of high-resolution field mapping and the analyses of mesoscopic scale structures, we demonstrate that the Munsiari Thrust is a typical fault zone that is made up of a fault core and two damage zones. The fault core traces the boundary between the quartzite and the biotite-gneiss. The damage zones consist of the low-grade metasedimentary rocks in the footwall and the gneiss-migmatite in the hanging wall. The entire fault zone shares an essentially common history of progressive ductile shearing. Successively developed mesoscopic folds trace various stages of progressive ductile shearing in the damage zones. Two recognizable stages of the shearing are represented by the early isoclinal folds and the late kink folds. As the strain during progressive deformation achieved the levels that were too high for accommodation by ductile flow, it was released by development of a tectonic dislocation along a mechanically weak boundary, the Munsiari Thrust. The isoclinal folds and the Munsiari Thrust were developed at different stages of a common progressive deformation during the Himalayan orogeny. Contrary to the popular notion of consistency with respect to orientation, the stretching lineations show large directional variability due to distortion during the late folding.     

Vorticity analysis of the Palmi shear zone mylonites: new insights for the Alpine tectonic evolution of the Calabria–Peloritani terrane (southern Italy)

New microstructural data on the mylonites from the well‐exposed Palmi shear zone (southern Calabria) are presented with the aim to shed light on both the kinematics and the geometry of the southwestern branch of the Alpine belt during Eocene. In the study area, located between the Sardinia–Corsica block and the Calabria–Peloritani terrane, previous large‐scale geodynamic reconstructions suggest the presence of strike–slip or transform fault zones dissecting the southwestern branch of the Alpine belt. However, there are no field data supporting the occurrence of these structures. This paper uses vorticity analysis technique based on the aspect ratio and the long axis orientation of rigid porphyroclasts in mylonitic marbles and mylonitic granitoids, to estimate the contribution of pure and simple shear of deformation during the movement of the Palmi shear zone. Porphyroclasts aspect ratio and orientation were measured on thin sections using image analysis. Estimates of the vorticity number, W_m, indicate that the Palmi shear zone recorded general shear with a contribution of pure shear of c. 65%. Then, the Palmi shear zone can be interpreted as a segment of a left‐lateral transpressive bend along the southern termination of the Eocene Alpine front. Copyright © 2015 John Wiley & Sons, Ltd.     

Strain, Kinematic Vorticity and Ductile Thinning along the Detachment Zone of the Yunmeng Shan Metamorphic Core Complex, Beijing, China

The Yunmeng Shan metamorphic core complex (MCC) is composed of the lower plate, the upper plate and the detachment zone. The detachment zone consists of ductile shear zone (mylonite zone), chloritized microbreccias zone and the brittle fault plane. The ductile shear zone contains mylonitic rocks, protomylonites, and mylonites. Finite strain measurements of feldspar porphyroclasts from those rocks using the Rf/φ method show that the strain intensities increase from mylonitic rocks (Es=0.66–0.72) to protomylonites (Es=0.66–0.83), and to mylonites (Es=0.71–1.2). The strain type is close to flatten strain. Kinematic vorticity estimated by Polar Mohr diagrams suggest that foliations and lineation of mylonite (0.47相似文献   

Kinematic vorticity technique for porphyroclasts in the metamorphic rocks: an example from the northern thrust in Wadi Mubarak belt, Eastern Desert, Egypt

New structural, metamorphic, finite strain, and kinematic vorticity data for mylonitic granitic rocks from northern thrust in Wadi Mubarak reveal a history of deformation reflecting different tectonic regimes. The vorticity analysis of porphyroclasts was determined in high temperature mylonites. The kinematic vorticity number for the mylonitic granitic samples in the northern thrust in Wadi Mubarak range from 0.66 to 0.90, and together with the strain data suggest deviations from simple shear. It is concluded that nappe stacking occurred early during the underthrusting event probably by brittle imbrication and that ductile strain was superimposed on the nappe structure during thrusting. The accumulation of ductile strain during thrusting was not by simple shear and involved a component of vertical shortening, which caused the subhorizontal foliation in the northern thrust in Wadi Mubarak and adjacent units.     

Thermal Evolution of the Tanlu Fault Zone on the Eastern Margin of the Dabie Mountains and Its Tectonic Implications

Five samples of muscovite from mylonites of the earlier Tanlu ductile shear zone on the eastern margin of the Dabie Mountains yield 40Ar/39Ar ages ranging from 178 Ma to 196 Ma. Three of them have reliable plateau ages of 188.7±0.7 Ma, 189.7±0.6 Ma and 192.5±0.7 Ma respectively, which indicates a syn-orogenic, sinistral strike-slip thermal event. This displacement movement derived from the continent-continent collision of the North and South China blocks took place in the Early Jurassic and after uplifting of high-pressure to ultrahigh-pressure slabs to the mid-crust. It is suggested that during the collision the Tanlu fault zone was an intracontinental transform fault caused by differential subduction speeds. The 40Ar/39Ar ages of mylonite whole-rock and muscovite from the later Tanlu ductile shear zone suggest another sinistral strike-slip cooling event at 128 Ma. During this strike-slip faulting, large-scale intrusion and doming uplift occurred in the eastern part of the Dabie orogenic belt. Data o     

Lithological subdivision and petrology of the Great Himalayan Vaikrita Group in Kumaun,India

The Vaikrita Group made up of coarse mica-garnet-kyanite and sillimanite-bearing psammitic metamorphics constituting the bulk of the Great Himalaya in Kumaun is divisible into four formations, namely theJoshimath comprising streaky, banded psammitic gneisses and schists, the Pandukeshwar consisting predominantly of quartzite with intercalations of schists, thePindari made up of gneisses and schists with lenses of calc-silicate rocks and overwhelmingly injected by Tertiary pegmatites and granites (Badrinath Granite) leading to development of migmatites, and theBudhi Schist comprising biotite-rich calc-schists. The Vaikrita has been thrust along the Main Central Thrust over the Lesser Himalayan Munsiari Formation made up of highly mylonitized low-to meso-grade metamorphics, augen gneisses and phyllonites. Petrological studies demonstrate contrasting nature of metamorphism experienced by the Vaikrita and the Munsiari rocks. Sillimanite-kyanite-garnet-biotite-muscovite (±K-feldspar and ± plagioclase).—quartz metapelites and interbanded calc-schists and calc-gneisses with mineral assemblages of calcite-hornblende-grossular garnet, labradorite (An₅₀?An₆₅), (± K-feldspar)-quartz (± biotite), and hornblende-diopside ± labradorite ± quartz, suggest medium to high grade of metamorphism or indicate upper amphibolite facies experienced by the rocks of the Vaikrita Group. The associated migmatites, granite-gneisses and granites of the Pindari Formation were formed largely as a result of anatexis of metapelites and metapsammites. While, the sericite-chlorite-quartz and muscovite-chlorite-chloritoid-garnet-quartz, assemblages in metapelites and epidote-actinolite-oligoclase (An₂₀)-quartz and epidote-hornblende-andesine (An₂₉) ± quartz in the metabasites suggest a low-grade metamorphism (greenschist facies) for the Munsiari Formation, locally attaining the lower limit of medium-grade (epidote-amphibolite) facies. The inferred P-T conditions obtained from textural relations of various mineral phases and the stability relationship of different coexisting phases in equilibrium, suggest that the temperature ranged between 600° and 650° C and pressure was over 5 kb for the Vaikrita rocks. The mineral assemblages of the Munsiari Formation indicate comparatively lower P-T conditions, where the temperature reached approximately 450° C and pressure was near 4 kb. The rocks of the two groups were later subjected to intense shearing, cataclasis and attendant retrograde metamorphism within the zone of the Main Central (=Vaikrita) Thrust.     

Deformation Stages and Ar‐Ar Age Data of the Wan‐Zhe‐Gan Tectonic Zone,Southeast China,and Their Tectonic Significance

The major tectonic zone that passes through the border regions of the Anhui, Zhejiang, and Jiangxi Provinces in southeast China has been commonly referred to as the Wan-Zhe-Gan fault zone. Geologically, this zone consists of several regional fault belts of various ages and orientations. We have categorized the faults into four age groups based on field investigations. The Neoproterozoic faults are northeast striking. They start from the northeast Jiangxi Province and extend northeastward to Fuchuan in Anhui Province, the same location of the northeast Jiangxi-Fuchuan ophiolite belt. The faults probably acted? during the Neoproterozoic as a boundary fault zone of a plate or a block suture with mélange along the faults. The nearly east-west- or east-northeast-striking faults are of Silurian ages (40Ar/39Ar age 429 Ma). This group includes the Qimen-Shexian fault and the Jiangwang-Jiekou ductile shear belt. They represent a major tectonic boundary in the basement because the two sides of the fault have clear dissimilarities. The third group of faults is north-northeast striking, having formed since the early-middle Triassic with 40Ar/39Ar ages of 230–254 Ma. They form a fault belt starting from Yiyang in northern Jiangxi and connect with the Wucheng as well as the Ningguo-Jixi faults. This fault belt is a key fault-magmatic belt controlling the formation of Jurassic-Cretaceous red basins, ore distribution, magmatic activity, and mineralization. When it reactivated during the late Cretaceous, the belt behaved as a series of reverse faults from southeast to northwest and composed the fourth fault group. Therefore, classifying the Wan-Zhe-Gan fault zone into four fault groups will help in the analysis of the tectonic evolution of the eastern segment of the Jiangnan orogen since the Neoproterozoic era.     

U-Pb zircon ages and Sm-Nd isotopic characteristics of the Lesser and Great Himalayan sequences,Uttarakhand Himalaya,and their regional tectonic implications

Detrital zircons (DZ) and Nd isotopic characteristics constraint maximum depositional ages of two distinct Paleoproterozoic and Neoproterozoic terranes across the Main Central Thrust zone (Munsiari Group) in the Himalaya. New DZ ages and Nd isotopic characters are reported from the Inner Lesser Himalaya (iLH) sedimentary belt (Berinag Group quartzite) and the Munsiari Group through the Great Himalayan Sequence (GHS–Vaikrita Group) across the MCT to the lower parts of the Tethyan Himalayan Sequence (THS) along the Alaknanda–Dhauli Ganga valleys, Uttarakhand Himalaya. The iLH Berinag Group quartzite yielded nearly unimodal DZ U-Pb ages between 2.05 and 1.80 Ga with ε_Nd(0) values of −17 and −23, while the overthrust Munsiari Group, bounded by the Munsiari Thrust at the base and the Vaikrita Thrust (MCT) at the top, represents the Proterozoic magmatic arc with ∼1.95 and 1.89 Ga U-Pb zircon age population with an average of −25 ε_Nd(0) value; the arc developed during the Columbia Supercontinent assembly. In contrast, overthrust Great Himalayan Sequence (GHS–Vaikrita Group) above the MCT is characterized by entirely new Neoproterozoic 1.05–0.85 Ga zircon population, which appears for the first time in this sequence, and has higher ε_Nd(0) values (average −16). Tectonically overlying the GHS, the Tethyan Himalayan Sequence (THS) has first appearance of the Early Paleozoic detrital zircons, with its ε_Nd(0) values like the GHS. Broadly, these characters persist throughout the Himalayan belt from Himachal to NE Himalaya. The iLH sediments were possibly derived from northernly ∼1.9 Ga magmatic arc, and southern the Archean–Proterozoic Aravalli–Bundelkhand nuclei of the Indian craton. Potential sources for the GHS sediments may be a northerly ‘destroyed’ Neoproterozoic magmatic arc whose remnants exists within the Himalaya as the Neoproterozoic granitoids, and possibly be the iLH sedimentary belt, an ‘In-board’ Aravalli–Delhi Fold Belt (ADFB)–Central Indian Tectonic Zone (CITZ) in the south.     

Initiation Timing of the Jiamusi–Yitong Fault Zone in NE China

The NE–striking Jiamusi–Yitong fault zone(JYFZ) is the most important branch in the northern segment of the Tancheng–Lujiang fault zone. The precise shearing time of its large–scale sinistral strike–slip has yet to determined and must be constrained. Detailed field investigations and comprehensive analyses show that strike–slip faults or ductile shear belts exist as origination structures along the western region of Yitong Graben. The strike of the shear belts trend to the NE–SW with steep mylonitic foliation. The zircon U–Pb dating result for the granite was 264.1±1 Ma in the ductile shear belt of the JYFZ. The microstructural observation(rotated feldspar porphyroclasts, S–C fabrics, and quartz c–axis fabrics, etc.) demonstrated the sinistral shearing of the ductile shear zones. Moreover, the recrystallized quartz types show a transitional stage of the subgrain rotation toward the recrystallization of the grain boundary migration(SR–GBM). Therefore, we suggest that the metamorphic grade of the shear zone in the ductile shear zones should have reached high greenschist facies conditions, and the deformation temperatures should approximately 450–500°C, which is obviously higher than the blocking temperature of muscovite(300–400°C). Hence, the ~(40)Ar/~(39)Ar isochron age of muscovite from ductile shear zones should be a cooling age(162.7±1 Ma). We infer that the sinistral strike–slipping event at the JYFZ occurred in the late Jurassic period, and it was further inferred from the ages of the main geological events in this region that the second sinistral strike–slip age of the Tancheng–Lujiang fault zone occurred during the period of tectonic movements in the Circum–Pacific tectonic domain. This discovery also indicates the age of the Tancheng–Lujiang fault zone that stretches to northeastern China. The initiation of the JYFZ in the late Jurassic is related to the speed and direction of oblique subduction of the west Pacific Plate under the Eurasian continent and is responsible for collision during the Jurassic period.     

Flow vorticity in Zhangbaling transpressional attachment zone,SE China

Plagioclase porphyroclasts with well-preserved idiomorphic shapes and zoning, and showing limited clast interaction, are ubiquitous in the flat-lying Zhangbaling schist that is exposed east of the Tan-Lu fault in southeast China. Plagioclase porphyroclasts define rigid particles whose distribution be related to the kinematic vorticity of the schist using the methods of porphyroclast hyperbolic distribution (PHD) and modified Rf/ϕ (Passchier/Wallis plot). The kinematic vorticity numbers calculated from this approach range from Wk = 0.72 to 0.82, increasing progressively from south to north along the Zhangbaling belt. Such a Wk distribution indicates that the Zhangbaling schist was deformed uniformly under simple-shear dominated general shear, and that the Zhangbaling ductile crust experienced relatively even crustal thinning deformation. The subhorizontal Zhangbaling schist is considered a mid-crustal attachment zone that coupled the rigid upper crust to a subvertical, wrench shear zone in the lower crust.     

A Middle Paleozoic shear zone in the Sierra de Valle Fértil,Argentina: Records of a continent-arc collision in the Famatinian margin of Gondwana

Geological, petrological and structural observations were obtained along a 30-km-long traverse across a segment of the Valle Fértil shear zone, central-western Argentina. On a regional scale, the shear zone appears as numerous discontinues belts over 25 km in width and is approximately 140 km in length, extended on the western section of the Sierras Valle Fértil – La Huerta mountain range. The steeply dipping shear zone with a vertical mylonitic lineation is composed of amphibolite facies ribbon mylonites and amphibolite to greenschist facies ultramylonites derived from Early Ordovician plutonic and metasedimentary parent rocks. Locally, syn-kinematic retrogression of mylonites formed greenschist facies phyllonites. During the later stages of deformation, unstrained parent rocks, mylonites, ultramylonites and phyllonites were affected by pervasive cataclasis under low greenschist facies conditions associated with localized faulting. One new ⁴⁰Ar/³⁹Ar age on biotite and published ⁴⁰Ar/³⁹Ar ages on amphibole in the shear zone yield an average cooling rate of 6.2 °C/Ma for a time period that crosses the Silurian–Devonian boundary. Since in metasedimentary rocks the youngest zircon's rims dated at 465 Ma marks the beginning of cooling, nearly continuous uplift of rocks within the shear zone occurred over a minimum time span of 55 Ma. During the period of active deformation, dip-slip movement can explain uplift of several kilometers of the Early Ordovician arc crust. The Valle Fértil shear zone, which was formed near above the inferred suture zone between the Famatinian arc and Cuyania microcontinent, is a major structural boundary nucleated within the Early Ordovician crust. The simplest geodynamic model to explain the evolution of the Valle Fértil shear zone involves the collision of the composite Cuyania/Precodillera microcontinent against the Famatinian arc.     

秦岭商丹断裂带的构造样式与变形分析

商丹断裂带作为扬子板块与华北板块的缝合带,在秦岭造山带中占据重要的地位。对其进行精细的构造研究,是了解扬子板块与华北板块相互作用过程的关键。研究工作在商丹断裂带东段展开,对该带进行了详细的野外观察、显微构造观察、糜棱岩化过程中温度的估算、有限应变测量、差异应力的计算以及糜棱岩化过程中运动学涡度的计算。变形温压条件指示糜棱岩形成于中-高绿片岩相到低角闪岩相变质条件。差异应力计算结果指示商丹带具备大型构造动力特征。涡度分析表明该断裂带的变形以纯剪切作用占据主导作用,但包含有简单剪切的分量,从而证明了扬子板块与华北板块之间具有以碰撞挤压为主的斜向汇聚方式。     

A comparative U–Th–Pb (zircon–monazite) and 40Ar–39Ar (muscovite–biotite) study of shear zones in northern Victoria Land (Antarctica): implications for geochronology and localized reworking of the Ross Orogen

Mylonitic granites from two shear zones in northern Victoria Land (Antarctica) were investigated in order to examine the behaviour of the U–Th–Pb system in zircon and monazite and of the ⁴⁰Ar–³⁹Ar system in micas during ductile deformation. Meso‐ and micro‐structural data indicate that shear zones gently dip to the NE and SW, have an opposite sense of shear (top‐to‐the‐SW and ‐NE, respectively) and developed under upper greenschist facies conditions. In situ U–Pb dating by laser‐ablation inductively coupled plasma‐mass spectrometry of zircon areas with well‐preserved igneous zoning patterns (c. 490 Ma) confirm that granites were emplaced during the Early Cambrian to Early Ordovician Ross–Delamerian Orogeny. Monazite from the Bier Point Shear Zone (BPSZ) mainly yielded U–Th–Pb ages of c. 440 Ma, in agreement with in‐situ Ar laserprobe ages of syn‐shear muscovite and with most Ar ages of coexisting biotite. The agreement of ages derived from different decay schemes and from minerals with different crystal‐chemical features suggests that isotope transport in the studied sample was mainly controlled by (re)crystallization processes and that the main episode of ductile deformation in the BPSZ occurred at c. 440 Ma. Cathodoluminscence imaging showed that zircon from the BPSZ contains decomposed areas with faint relics of oscillatory zoning. These areas yielded a U–Pb age pattern which mimics that of monazite but is slightly shifted towards older ages, supporting previous studies which suggest that ‘ghost’ structures may be affected by inheritance. In contrast, secondary structures in zircon from the Mt. Emison Shear Zone (MESZ) predominantly consist of overgrowths or totally recrystallized areas and gave U–Pb ages of c. 450 and 410 Ma. The c. 450‐Ma date matches within errors most monazite U–Th–Pb ages and in‐situ Ar ages on biotite aligned along the mylonitic foliation. This again suggests that isotope ages from the different minerals are (re)crystallization ages and constrains the time of shearing in the MESZ to the Late Ordovician. Regionally, results indicate that shear zones were active in the Late Ordovician–Early Silurian and that their development was partially synchronous at c. 440 Ma, suggesting that they belong to a shear‐zone system formed in response to ～NE–SW‐directed shortening. Taking into account the former juxtaposition of northern Victoria Land and SE Australia, we propose that shear zones represent reactivated zones formed in response to stress applied along the new plate margin as a consequence of contractional tectonics associated with the early stages (Benambran Orogeny) of the development of the Late Ordovician–Late Devonian Lachlan Fold Belt.     

Vorticity analysis in calcite tectonites: An example from the Attico-Cycladic massif (Attica,Greece)

Although calcite tectonites are widespread in nature their use to quantify flow vorticity is limited. We use new (micro-)structural, petrofabric and vorticity data to analyse the kinematics of flow in outcrop-scale calcite mylonite zones. These zones are genetically related to a crustal-scale NE-directed ductile thrust (Basal Thrust) that emplaced the Blueschist over the Basal unit during the exhumation of the Attico-Cycladic Massif. Calcite microstructures reveal that the last stage of deformation occurred at temperatures 200–300 °C achieved by mild heating, which is possibly related with the reburial of the Basal Thrust's footwall. Vorticity analyses were based on the degree of asymmetry of calcite c-axis fabrics as well as on the assumption that the orientation of the long axes of calcite neoblasts within an oblique foliation delineates the direction of instantaneous stretching axis. Both methodological approaches provide consistent estimates with a simple shear component between 55% and 82% (W_n = 0.76–0.96). The use of the stress axis (σ₁) orientation recorded by twin-c-axis-pairs to quantify vorticity generally gives significantly lower simple shear component. Comparison of our vorticity estimates with previous estimates inferred from quartz fabrics and rigid porphyroclasts reveals that exhumation-related deformation in the nappe pile was steady state.     

Using white mica 40Ar/39Ar data as a tracer for fluid flow and permeability under high‐P conditions: Tauern Window,Eastern Alps

New single‐grain‐fusion muscovite and paragonite ⁴⁰Ar/³⁹Ar data from eclogite and blueschist units exposed in the Tauern Window, Eastern Alps yield a range of apparent ages from 90 to 23 Ma. These apparent ages are generally older than expected for ⁴⁰Ar/³⁹Ar cooling ages, given constraints from other geochronological systems such as Rb–Sr and U–Pb. Numerical Ar‐in‐muscovite diffusion models for Tauern Window nappe P–T paths in an open system suggest that ⁴⁰Ar/³⁹Ar ages should lie between 29 and 24 Ma, and that they should constrain cooling and decompression following the post‐high pressure Barrovian overprint. The measured ranges of apparent ⁴⁰Ar/³⁹Ar dates suggest that the assumption of open system behaviour is not valid for this region. The local and/or regional generation of fluid during exhumation promoted pervasive recrystallization of high pressure lithologies throughout the Tauern Window to greenschist and amphibolite facies assemblages. The old apparent ⁴⁰Ar/³⁹Ar white mica dates in all lithologies are therefore interpreted as being due to inefficient removal of grain boundary Ar by the grain boundary fluids during the Barrovian overprint, due to high Ar concentrations or limited connectivity or both. This caused spatially (mm‐scale) and temporally variable fluxes of Ar out of, and probably into, white mica in both metasedimentary and metabasic lithologies.     

Usage of strain and vorticity analyses to interpret large‐scale fold mechanisms along the Sanandaj–Sirjan HP‐LT metamorphic belt,SW Iran

3D finite strain analyses and kinematic vorticity measurements were carried out on the Loghon Anticline within the HP‐LT Sanandaj–Sirjan metamorphic belt (Neyriz area, SW Iran). Rƒ/φ and Fry methods were used on the strain markers (e.g. deformed fossils) to interpret geometric relationships between the fold axis, strain ellipsoid axes and shear zone boundaries. The results indicate the predominance of prolate strain in the anticline. Quantitative kinematic analyses show that the W_k parameter is 0. 67 ± 0. 06 (i.e. pure‐shear dominated non‐coaxial flow). This study quantitatively supports the establishment of a dextral transpressive system, which is responsible for the development of the large‐scale right‐lateral shear zones that strike sub‐parallel to the major folds. Flexural shear combined with regional dextral‐shear is suggested to be the most common mechanism of folding in this area. Copyright © 2011 John Wiley & Sons, Ltd.     

Aspects of the structural and late thermal evolution of the Redbank Thrust system,central Australia: Constraints from the Speares Metamorphics

We present new data on the field geology and late thermal evolution of the Redbank Thrust system in the Arunta Block of central Australia. Geochronological and field data from the Speares Metamorphics are also used to relate the thermal evolution of the Redbank Thrust system to the structural evolution of the region. We show that several stages in the evolution might be discerned. An originally sedimentary sequence was intruded by mafic intrusions and then deformed during partial melting to form the principal foliation observed in the region (D1). This sequence was then folded during D2 into upright folds with north‐ to northeast‐plunging fold axes. These events are likely to correlate with the Strangways and/or Argilke and Chewings Orogenies known from previous studies. Subsequently, the Redbank Thrust was initiated during D3. This event is recognised by deflection of the host rocks into the shear zone and might therefore have been associated with a component of strike‐slip motion. It occurred probably at or before 1500–1400 Ma. Subsequent north‐over‐south thrust motion in the Redbank Thrust formed the intense mylonitic fabric and folded the mylonitic fabric during D4 into asymmetric folds with shallow fold axes. New ⁴⁰Ar/³⁹Ar K‐feldspar ages from three samples collected from variably deformed branches of the Redbank Thrust and undeformed rocks in the Speares Metamorphics suggest that most parts of the Redbank Thrust system cooled relatively slowly after metamorphism and deformation in the Mesoproterozoic so that the D4 thrusting might have been very long‐lived. Minimum ages of the K‐feldspar age spectra show that the entire region cooled below 200°C by approximately 300 Ma. Apatite fission track ages from nine samples show that cooling through the apatite partial annealing zone occurred during Cretaceous time (ca 150–70 Ma) and modelled cooling histories are consistent with the cooling rates obtained from the K‐feldspar data. They indicate that final exhumation of the Redbank Thrust system occurred probably in response to erosion, possibly driven by rifting around the margins of Australia.     

Microstructural analysis and P–T conditions of the Azul megashear zone, Tandilia, Buenos Aires province, Argentina

A microstructural analysis was carried out on mylonitic rocks of the Azul megashear zone (AMSZ), Tandilia, which were formed in a range of metamorphic conditions from lower greenschist to amphibolite facies. Tailed porphyroclasts are common and mostly symmetric. Scarce asymmetric rotated porphyroclasts show both sinistral and dextral senses of shear. In sections parallel to the mylonitic foliation, porphyroclasts are round. The AMSZ is probably related to the late Transamazonian orogenic cycle and may be due to NNE–SSW-directed convergence. In weakly deformed protolith and protomylonites, quartz deforms by dynamic recrystallization, mainly subgrain rotation in dislocation creep Regime 2. K-feldspar porphyroclasts and plagioclase show scarce fracturation and deform by dynamic recrystallization along grain boundaries. Quartz microstructures in mylonites indicate predominantly Regime 3 grain boundary migration recrystallization. Feldspar structures indicate recrystallization through the nucleation and growth of new grains at grain boundaries. The temperatures of deformation from mineral assemblages in the CNKFMASH system in four bulk compositions are in the range of 400–450 °C, and the pressures are more than 6 kb.     

Ar-Ar Geochronology in a gneiss dome within the Zagros Orogénic Belt

Exhumation of the Tutak mantled gneiss dome without significant cooling has taken place in a doubly plunging anticline within the Sanandaj-Sirjan HP-LT metamorphic belt in the Zagros Thrust System of Iran. Reconstruction of structural evolution of the Tutak gneiss dome at the contact between Arabian and Iranian plates by ⁴⁰Ar/³⁹Ar geochronology exhibits history of the closure of Neo-Tethyan Ocean. There are two granites of different ages in the core of dome; the oldest corresponds to the central Iranian continental crust and was deformed at about 180 Ma. The younger granite was emplaced in the NE–SW transpression system. The timing of strain-related fabrics and exhumation history of the region illustrates the closure of Neo-Tethys and beginning of continent-continent collision at about 77 Ma, as constrained by a well defined plateau ⁴⁰Ar/³⁹Ar age obtained on biotite. Then, the biotite age corresponds to the second stage of emplacement of the Bendenow granite-gneiss which illustrating repeated orogenic events. Continuing deformation without interruption that by now has been created at about 77 Ma, was largely restricted to the transpression and high proportion of simple shear components relative to the pure shear components along the NE–SW.     

Triassic high-strain shear zones in Hainan Island (South China) and their implications on the amalgamation of the Indochina and South China Blocks: Kinematic and Ar/Ar geochronological constraints

A kinematic and geochronological study has been carried out on the Triassic high-strain shear zones in Hainan Island, the southern South China Block. There are WNW- and NE-trending high-strain shear zones with greenschist- to amphibolite-facies metamorphism in this island. Kinematic indicators suggest a dextral top-to-the-NNE thrust shearing for the WNW-trending high-strain shear zones and a sinistral top-to-the-SE thrust shearing for the NE-trending shear zones. The quartz c-axis orientations of mylonitic rocks exhibit the domination of basal slip and some activation of a rhombohedra gliding system. The timing of shearing for these shear zones has been constrained by the ⁴⁰Ar/³⁹Ar dating analyses of synkinematic minerals. Middle Triassic (242–250 Ma) and late Triassic–early Jurassic (190–230 Ma) have been identified for the WNW- and NE-trending shear zones, respectively. A synthesis of these kinematic and thermogeochronological data points to a two-stage tectonic model for Hainan Island, that is, top-to-the-NNE oblique thrusting at 240–250 Ma followed by top-to-the-SE oblique thrusting at 190–230 Ma. In combination with the available data from the southern South China and Indochina Blocks, it is inferred that South Hainan and North Hainan have affinity to the Indochina and South China Blocks, respectively. The tectonic boundary between South Hainan and North Hainan lies roughly along the WNW-trending Changjiang–Qionghai tectonic zone probably linking to the Song Ma and Ailaoshan zones. The middle Triassic structural pattern of Hainan Island is spatially and temporally compatible with those of the South China and Indochina Blocks, and thus might be a derivation from the amalgamation of the Indochina with South China Blocks in response to the closure of the Paleotethys Ocean and subsequent subduction/collision.