Tectonic analysis of an oceanic transform fault zone based on fault-slip data and earthquake focal mechanisms: the Húsavík–Flatey Fault zone, Iceland

The Húsavík–Flatey Fault (HFF) is an oblique dextral transform fault, part of the Tjörnes Fracture Zone (TFZ), that connects the North Volcanic Zone of Iceland and the Kolbeinsey Ridge. We carry out stress inversion to reconstruct the paleostress fields and present-day stress fields along the Húsavík–Flatey Fault, analysing 2700 brittle tectonic data measured on the field and about 700 earthquake focal mechanisms calculated by the Icelandic Meteorological Office. This allows us to discuss the Latest Cenozoic finite deformations (from the tectonic data) as well as the present-day deformations (from the earthquake mechanisms). In both these cases, different tectonic groups are reconstructed and each of them includes several distinct stress states characterised by normal or strike-slip faulting. The stress states of a same tectonic group are related through stress permutations (σ₁−σ₂ and σ₂−σ₃ permutations as well as σ₁−σ₃ reversals). They do not reflect separate tectonic episodes. The tectonic groups derived from the geological data and the earthquake data have striking similarity and are considered to be related. The obliquity of the Húsavík–Flatey Fault implies geometric accommodation in the transform zone, resulting mainly from a dextral transtension along an ENE–WSW trend. This overall mechanism is subject to slip partitioning into two stress states: a Húsavík–Flatey Fault-perpendicular, NE–SW trending extension and a Húsavík–Flatey Fault-parallel, NW–SE trending extension. These three regimes occur in various local tectonic successions and not as a regional definite succession of tectonic events. The largest magnitude earthquakes reveal a regional stress field tightly related to the transform motion, whereas the lowest magnitude earthquakes depend on the local stress fields. The field data also reveal an early extension trending similar to the spreading vector. The focal mechanism data do not reflect this extension, which occurred earlier in the evolution of the HFF and is interpreted as a stage of structural development dominated by the rifting process.     

The role of the Kazakhstan orocline in the late Paleozoic amalgamation of Eurasia

After the 2005 Kashmir earthquake, we mapped surface ground fractures in Tangdhar, Uri, Rajouri and Punch sectors and liquefaction features in Jammu area lying close to the eastern side of the Line of Control (LOC) in Kashmir, India. The NW trending ground fractures occurred largely in the hanging wall zone of the southeastern extension of the causative fault in Tangdhar and Uri sectors. The principal compressive stress deduced from the earthquake induced ground fractures is oriented at N10°, whereas the causative Balakot–Bagh fault strikes 330°. The fault-plane solution indicates primarily SW thrusting of the causative fault with a component of strike–slip motion. The ground fractures reflect pronounced strike–slip together with some tensile component. The Tangdhar area showing left-lateral strike–slip motion lies on the hanging wall, and the Uri region showing right-lateral strike–slip movement is located towards the southeastern extension of the causative fault zone. The shear fractures are related to static stress that was responsible for the failure of causative fault. The tensile fractures with offsets are attributed to combination of both static and dynamic stresses, and the fractures and openings without offsets owe their origin due to dynamic stress. In Punch–Rajouri and Jammu area, which lies on the footwall, the fractures and liquefactions were generated by dynamic stress. The occurrence of liquefaction features in the out board part of the Himalayan range front near Jammu is suggestive of stress transfer  230 km southeast of the epicenter. The Balakot–Bagh Fault (BBF), the Muzaffarabad anticline, the rupture zone of causative fault and the zone of aftershocks — all are aligned in a  25 km wide belt along the NW–SE trending regional Himalayan strike of Kashmir region and lying between the MBT and the Riasi Thrust (Murree Thrust), suggesting a seismogenic zone that may propagate towards the southeast to trigger an earthquake in the eastern part of the Kashmir region.     

Cenozoic post-collisional brittle tectonic history and stress reorientation in the High Zagros Belt (Iran, Fars Province)

The Zagros fold-and-thrust belt of SW-Iran is among the youngest continental collision zones on Earth. Collision is thought to have occurred in the late Oligocene–early Miocene, followed by continental shortening. The High Zagros Belt (HZB) presents a Neogene imbricate structure that has affected the thick sedimentary cover of the former Arabian continental passive margin. The HZB of interior Fars marks the innermost part of SE-Zagros, trending NW–SE, that is characterised by higher elevation, lack of seismicity, and no evident active crustal shortening with respect to the outer (SW) parts. This study examines the brittle structures that developed during the mountain building process to decipher the history of polyphase deformation and variations in compressive tectonic fields since the onset of collision. Analytic inversion techniques enabled us to determine and separate different brittle tectonic regimes in terms of stress tensors. Various strike–slip, compressional, and tensional stress regimes are thus identified with different stress fields. Brittle tectonic analyses were carried out to reconstruct possible geometrical relationships between different structures and to establish relative chronologies of corresponding stress fields, considering the folding process. Results indicate that in the studied area, the main fold and thrust structure developed in a general compressional stress regime with an average N032° direction of σ₁ stress axis during the Miocene. Strike–slip structures were generated under three successive strike–slip stress regimes with different σ₁ directions in the early Miocene (N053°), late Miocene–early Pliocene (N026°), and post-Pliocene (N002°), evolving from pre-fold to post-fold faulting. Tensional structures also developed as a function of the evolving stress regimes. Our reconstruction of stress fields suggests an anticlockwise reorientation of the horizontal σ₁ axis since the onset of collision and a significant change in vertical stress from σ₃ to σ₂ since the late stage of folding and thrusting. A late right-lateral reactivation was also observed on some pre-existing belt-parallel brittle structures, especially along the reverse fault systems, consistent with the recent N–S plate convergence. However, this feature was not reflected by large structures in the HZB of interior Fars. The results should not be extrapolated to the entire Zagros belt, where the deformation front has propagated from inner to outer zones during the younger events.     

Seismotectonics of strike–slip earthquakes within the deep crust of southern Italy: Geometry, kinematics, stress field and crustal rheology of the Potenza 1990–1991 seismic sequences (Mmax 5.7)

We present a revision and a seismotectonic interpretation of deep crust strike–slip earthquake sequences that occurred in 1990–1991 in the Southern Apennines (Potenza area). The revision is motivated by: i) the striking similarity to a seismic sequence that occurred in 2002  140 km NNW, in an analogous tectonic context (Molise area), suggesting a common seismotectonic environment of regional importance; ii) the close proximity of such deep strike–slip seismicity with shallow extensional seismicity (Apennine area); and iii) the lack of knowledge about the mechanical properties of the crust that might justify the observed crustal seismicity. A comparison between the revised 1990–1991 earthquakes and the 2002 earthquakes, as well as the integration of seismological data with a rheological analysis offer new constraints on the regional seismotectonic context of crustal seismicity in the Southern Apennines. The seismological revision consists of a relocation of the aftershock sequences based on newly constrained velocity models. New focal mechanisms of the aftershocks are computed and the active state of stress is constrained via the use of a stress inversion technique. The relationships among the observed seismicity, the crustal structure of the Southern Apennines, and the rheological layering are analysed along a crustal section crossing southern Italy, by computing geotherms and two-mechanism (brittle frictional vs. ductile plastic strength) rheological profiles. The 1990–1991 seismicity is concentrated in a well-defined depth range (mostly between 15 and 23 km depths). This depth range corresponds to the upper pat of the middle crust underlying the Apulian sedimentary cover, in the footwall of the easternmost Apennine thrust system. The 3D distribution of the aftershocks, the fault kinematics, and the stress inversion indicate the activation of a right-lateral strike–slip fault striking N100°E under a stress field characterized by a sub-horizontal N142°-trending σ1 and a sub-horizontal N232°-trending σ3, very similar to the known stress field of the Gargano seismic zone in the Apulian foreland. The apparent anomalous depths of the earthquakes (> 15 km) and the confinement within a relatively narrow depth range are explained by the crustal rheology, which consists of a strong brittle layer at mid crustal depths sandwiched between two plastic horizons. This articulated rheological stratification is typical of the central part of the Southern Apennine crust, where the Apulian crust is overthrusted by Apennine units. Both the Potenza 1990–1991 and the Molise 2002 seismic sequences can be interpreted to be due to crustal E–W fault zones within the Apulian crust inherited from previous tectonic phases and overthrusted by Apennine units during the Late Pliocene–Middle Pleistocene. The present strike–slip tectonic regime reactivated these fault zones and caused them to move with an uneven mechanical behaviour; brittle seismogenic faulting is confined to the strong brittle part of the middle crust. This strong brittle layer might also act as a stress guide able to laterally transmit the deviatoric stresses responsible for the strike–slip regime in the Apulian crust and may explain the close proximity (nearly overlapping) of the strike–slip and normal faulting regimes in the Southern Apennines. From a methodological point of view, it seems that rather simple two-mechanism rheological profiles, though affected by uncertainties, are still a useful tool for estimating the rheological properties and likely seismogenic behaviour of the crust.     

Sources of Mw 5+ earthquakes in northeastern Italy and western Slovenia: An updated view based on geological and seismological evidence

We present an overview of the seismogenic sources of northeastern Italy and western Slovenia, included in the last version of the Database of Individual Seismogenic Sources (DISS 3.0.2) and a new definition of the geometry of the Montello Source that will be included in the next release of the database. The seismogenic sources included in DISS are active faults capable of generating M_w > 5.5 earthquakes. We describe the method and the data used for their identification and characterization, discuss some implications for the seismic hazard and underline controversial points and open issues.In the Veneto–Friuli area (NE Italy), destructive earthquakes up to M_w 6.6 are generated by thrust faulting along N-dipping structures of the Eastern Southalpine Chain. Thrusting along the mountain front responds to about 2 mm/a of regional convergence, and it is associated with growing anticlines, tilted and uplifted Quaternary palaeolandsurfaces and forced drainage anomalies. In western Slovenia, dextral strike–slip faulting along the NW–SE trending structures of the Idrija Fault System dominates the seismic release. Activity and style of faulting are defined by recent earthquakes (e.g. the M_s 5.7, 1998 Bovec–Krn Mt. and the M_w 5.2, 2004 Kobarid earthquakes), while the related recent morphotectonic imprint is still a debated matter.We reinterpreted a large set of tectonic data and developed a segmentation model for the outermost Eastern Southalpine Chain thrust front. We also proposed the association of the four major shocks of the 1976 Friuli earthquake sequence with individual segments of three major thrust fronts. Although several sub-parallel active strike–slip strands exist in western Slovenia, we were able to positively identify only two segments of the Idrija Fault System. A comparison of the regional GPS velocity with long-term geological slip-rates of the seismogenic sources included in DISS shows that from a quarter to half of the deformation is absorbed along the external alignment of thrust faults in Veneto and western Friuli. The partitioning of the deformation in western Slovenia among the different strike–slip strands could not be quantified.     

Cenozoic tectonic events at the border of the Paraná Basin, São Paulo, Brazil

In the last decade, even in areas that had been considered tectonically stable, a great amount of Cenozoic, including the Quaternary period, structural data have been collected throughout Brazil. The main goal of this study is to describe the Cenozoic structures and tectonic evolution of an area that is located at the border of the Paraná Basin in the state of São Paulo.The research methods consisted of the analysis of: (1) brittle structure data, mainly conjugate fractures and fault slip data; (2) lineaments traced on air photos and TM Landsat and radar images; and (3) a second-order base surface map.The study area, during the Cenozoic, has been affected by five strike–slip tectonic events, which generated mainly strike–slip faults, and secondarily normal and reverse ones. The events were named, from the oldest to the youngest, E1-NE, E2-EW, E3-NW, E4-NS, and E5-NNE; and the maximum principal stresses σ1 strike approximately NE–SW, E–W, NW–SE, N–S, and NNE–SSW, respectively. Event E2-EW seems to have been contemporaneous with the deposition of the Rio Claro Formation, the most important Cenozoic deposit of probable Neogenic age, and also to have controlled the distribution of its deposits. Event E3-NW was the strongest one in the area, as is pointed out by structural data, and the maximum principal stress σ1 of event E5-NNE is partially concordant with the orientation of σH-max of well break-out data in the Paraná Basin, suggesting a Neotectonic activity for this event. Finally, discontinuities parallel and correlated to the directions of strike–slip faults of the Cenozoic events seem to have actively controlled the sculpturing of the relief in the study area.     

Late Tertiary–Quaternary tectonics of the Southern Apennines (Italy): New evidences from the Tyrrhenian slope

This paper summarises the results of combined structural and geomorphological investigations we carried out in two key areas, in order to obtain new data on the structure and evolution of the Tyrrhenian slope of the southern Apennines. Analysis by a stress inversion method [Angelier, J., 1994. Fault slip analysis and paleostress reconstruction. In: Continental Deformation. P.L. Hancock Ed., Pergamon Press, Oxford, 53–100] of fault slip data from Mesozoic to Quaternary formations allowed the reconstruction of states of stress at different time intervals. By integrating these data with those deriving from the stratigraphic and morphotectonic records, chronology and timing of the sequence of the deformation events was obtained.The tectonic history of the region can be related to four deformation events. Structures related to the first event, that was dominated by a strike-slip regime with a NW–SE oriented σ1 and was active since Mid–Late Miocene, do not significantly affect the present day landscape, as they were strongly displaced and overprinted by subsequent deformation events and/or deleted by erosion. The second and third events, that may be considered as the main responsible for the morphostructural signature of the region, are comparable with the stretching phases recognised offshore and considered to be responsible for the opening and widening of the Tyrrhenian basin. In particular, the second event (with an E–W oriented σ3), took place in the Late Miocene/earliest Pliocene and was first dominated by a strike-slip regime, that was also responsible for thrusting and folding. Since Late Pliocene, it was dominated by an extensional regime that created large vertical offsets along N–S to NW–SE trending faults. The third event, that was dominated by extension with a NW–SE oriented σ3, started in the Early Pleistocene and was responsible for formation of the horst-and-graben structure with NE–SW trend that characterises the Tyrrhenian margin of the southern Apennines. The fourth deformation event, which is characterised by an extensional regime with a NE–SW trending σ3, started in the late Middle Pleistocene and is currently active.     

Seismotectonic deformations and stress fields in the fault zone of the 2003 Chuya earthquake, Ms = 7.5, Gorny Altai

The seismotectonic deformations related to the Chuya earthquake September 27, 2003 in the Gorny Altai (M_s = 7.5) are studied in detail. These deformations developed as advanced systems of R-and R’-shears, gash fractures, and compression structural features in loose sediments. In bedrocks, the older shear zones were reactivated, the previously existing fractures were renewed and propagated further, and new faults and crush zones were formed. The system of seismic dislocations is a fault zone no less than 4 km wide that extends in the northwestern direction. As follows from the structural elements that reveal a systematic mutual orientation, the internal structure of this zone is typical of a right-lateral strike-slip fault. The initial stress field that led to the development of the entire assemblage of seismotectonic deformations related to the Chuya earthquake corresponds to the strike-slip type with the NNW, almost meridional direction of compression axis (σ₁) and the ENE, almost latitudinal direction of the tension axis (σ₃). The local variations of the stress state were expressed in an insignificant shift of σ₁ to the northwest or northeast, in the short-term change of relative stress values with retention of their spatial orientation, and in the increasing inclination of σ₁ in front of the previously existing fault. The comparison of the internal structure of the seismotectonic fault zone with a tectonophysical model of faulting in large continental systems with a right-lateral offset indicates that the distribution of the advanced faults corresponds to the late stage of faulting, when the main fault is still not formed completely, but its particular segments are already developed distinctly. It is shown that at high rates of displacement the structural features in markedly different rocks develop according to the general laws of solids’ deformation even near the day surface.     

Fault geometries from the space distribution of the 1990–1997 Sannio–Benevento earthquakes: inferences on the active deformation in Southern Apennines

In this study, we analyze the recent (1990–1997) seismicity that affected the northern sector (Sannio–Benevento area) of the Southern Apennines chain. We applied the Best Estimate Method (BEM), which collapses hypocentral clouds, to the events of low energy (M_{d max}=4.1) seismic sequences in order to constrain the location and geometry of the seismogenetic structures. The results indicate that earthquakes aligned along three main structures: two sub-parallel structures striking NW–SE (1990–1992, Benevento sequence) and one structure striking NE–SW (1997, Sannio sequence). The southernmost NW–SE structure, which dips towards NE, overlies the fault that is likely to be responsible for a larger historical earthquake (I_{o max}=XI MCS, 1688 earthquake). The northernmost NW–SE striking structure dips towards SW. The NE–SW striking structure is sub-vertical and it is located at the northern tip of the fault segment supposed to be responsible for the 1688 earthquake. The spatio-temporal evolution of the 1990–1997 seismicity indicates a progressive migration from SE (Benevento) to NW (Sannio) associated to a deepening of hypocenters (i.e., from about 5 to 12 km). Hypocenters cluster at the interface between the major structural discontinuities (e.g., pre-existing thrust surfaces) or within higher rigidity layers (e.g., the Apulia carbonates). Available focal mechanisms from earthquakes occurred on the recognized NW–SE and NE–SW faults are consistent with dip-slip normal solutions. This evidences the occurrence of coexisting NW–SE and NE–SW extensions in Southern Apennines.     

Delineation of active faulting and some tectonic interpretations in the Munich-Milan section of the eastern Alps — use of LANDSAT-1 and 2 imagery

Based on studies of images obtained from LANDSAT-1 and 2, several seemingly active movement zones have been delineated in a section of the eastern Alps and are being reported in the present paper for the first time. These zones, trending W—E to NW—SE, cut across all earlier Alpine boundaries and contacts and on either side along their length, are marked with drag effects, indicating their post-Alpine neotectonic nature. Their relation with the present-day central European stress field, as determined from fault-plane studies and in-situ stress measurements, has been sought. In conjunction with the evidence from neighbouring areas, a dextral shear tendency of the present-day Mediterranean is indicated. Further, a number of extensive lineaments have been observed in the Alpine section. Statistically, there are three major lineation sets trending N45°, N15°, N345°. They appear to have developed cogenetically as a result of shear and tensile failures due to a stress field with maximum principal stress oriented averagely at N15°. This direction of the maximum principal stress, deduced from the above lineation analysis of the eastern Alps, is in striking conformity with the one believed to have been in existence for the development of the Rhinegraben (N20°). It appears that the Rhinegraben and the Alpide belt have evolved cogenetically and concurrently under the same dominant stress field (P₁ = N—NNE, P₂ = vertical and P₃ = E—ESE) and hence the two geotectonic features are really not antagonistic and mutually incompatible as usually believed on the grounds that one involves tension (taphrogenesis — Rhinegraben) and the other compression (orogenesis — Alpide belt) but are different manifestations of the same stress field. Besides, some additional light has been thrown on the possible controls of development of the Giudicaria Line and cause of predominance of NE—SW trending sinistral faults.     

The MW = 6.3 2003 Lefkada earthquake (Greece) and induced stress transfer changes

A large earthquake of magnitude M_W = 6.3 occurred on 14 August 2003 NW of the Lefkada Island, which is situated at the Ionian Sea (western Greece). The source parameters of this event are determined using body-wave modeling. The focal depth was found equal to 9 km, the constrained focal mechanism revealed dextral strike–slip motion (φ = 15°, Δ = 80° and λ = 170°), the duration of the source time function was 8 s and the seismic moment 2.9 × 10²⁵ dyn cm. The earthquake occurred close to the northern end of the Kefallinia transform fault, where the 1994 moderate event and its aftershock sequence were also located. The epicentral distribution of the 2003 aftershock sequence revealed the existence of two clusters. The first one is located close to the epicentral area of the mainshock, while the second southern, close to the northwestern coast of the Kefallinia Island. A gap of seismicity is observed between the two clusters. The length of the activated zone is approximately 60 km. The analysis of data revealed that the northern cluster is directly related to the mainshock, while the southern one was triggered by stress transfer caused by the main event.     

The 1980, 1997 and 1998 Azores earthquakes and some seismo-tectonic implications

We have studied the focal mechanisms of the 1980, 1997 and 1998 earthquakes in the Azores region from body-wave inversion of digital GDSN (Global Digital Seismograph Network) and broadband data. For the 1980 and 1998 shocks, we have obtained strike–slip faulting, with the rupture process made up of two sub-events in both shocks, with total scalar seismic moments of 1.9 × 10¹⁹ Nm (M_w = 6.8) and 1.4 × 10¹⁸ Nm (M_w = 6.0), respectively. For the 1997 shock, we have obtained a normal faulting mechanism, with the rupture process made up of three sub-events, with a total scalar seismic moment of 7.7 × 10¹⁷ Nm (M_w = 5.9). A common characteristic of these three earthquakes was the shallow focal depth, less than 10 km, in agreement with the oceanic-type crust. From the directivity function of Rayleigh (LR) waves, we have identified the NW–SE plane as the rupture plane for the 1980 and 1998 earthquakes with the rupture propagating to the SE. Slow rupture velocity, about of 1.5 km/s, has been estimated from directivity function for the 1980 and 1998 earthquakes. From spectral analysis and body-wave inversion, fault dimensions, stress drop and average slip have been estimated. Focal mechanisms of the three earthquakes we have studied, together with focal mechanisms obtained by other authors, have been used in order to obtain a seismotectonic model for the Azores region. We have found different types of behaviour present along the region. It can be divided into two zones: Zone I, from 30°W to 27°W; Zone II, from 27°W to 23°W, with a change in the seismicity and stress direction from Zone I. In Zone I, the total seismic moment tensor obtained corresponded to left-lateral strike–slip faulting with horizontal pressure and tension axes in the E–W and N–S directions, respectively. In Zone II, the total seismic moment tensor corresponded to normal faulting, with a horizontal tension axis trending NE–SW, normal to the Terceira Ridge. The stress pattern for the whole region corresponds to horizontal extension with an average seismic slip rate of 4.4 mm/yr.     

Surface Rupture and Co-seismic Displacement Produced by the Ms 8.0 Wenchuan Earthquake of May 12th, 2008, Sichuan, China： Eastwards Growth of the Qinghai-Tibet Plateau

An earthquake of Ms 8 struck Wenchuan County,western Sichuan,China,on May 12~(th), 2008 and resulted in long surface ruptures (>300 km).The first-hand observations about the surface ruptures produced by the earthquake in the worst-hit areas of Yingxiu,Beichuan and Qingchuan, ascertained that the causative structure of the earthquake was in the central fault zones of the Longmenshan tectonic belt.Average co-seismic vertical displacements along the individual fault of the Yingxiu-Beichuan rupture zone reach 2.5-4m and the cumulative vertical displacements across the central and frontal Longmenshan fault belt is about 5-6 m.The surface rupture strength was reduced from north of Beichuan to Qingchuan County and shows 2-3 m dextral strike-slip component.The Wenchuan thrust-faulting earthquake is a manifestation of eastward growth of the Tibetan Plateau under the action of continuous convergence of the Indian and Eurasian continents.     

Compressional- and transpressional-stress pattern for Pliocene and Quaternary brittle deformation in fore arc and intra-arc zones (Andes of Central and Southern Chile)

Kinematic analysis of fault slip data for stress determination was carried out on Late Miocene to Quaternary rocks from the fore arc and intra-arc regions of the Chilean Andes, between 33° and 46° south latitudes. Studies of Neogene and Quaternary infilling (the Central Depression), as well as plutonic rocks of the North Patagonian Batholith along the Liquiñe–Ofqui Fault Zone, have revealed various compressional and/or transpressional states of stress. In the Pliocene, the maximum compressional stress (σ₁) was generally oriented east–west. During the Quaternary, the deformation was partitioned into two coeval distinctive states of stress. In the fore arc zone, the state of stress was compressional, with σ₁ oriented in a N–S to NNE–SSW direction. In the intra-arc zone the state of stress was transpressional with σ₁ striking NE–SW. Along the coast, in one site (37°30′S) the Quaternary strain deformation is extensional, with an E–W direction, which can be explained by a co-seismic crustal bending readjustment.     

Stress fields and fault reactivation angles of the 2000 western Tottori aftershocks and the 2001 northern Hyogo swarm in southwest Japan

We estimated the stress fields of the aftershocks of the 2000 western Tottori earthquake (M_w 6.6) and the northern Hyogo swarm (max M_w 5.2) by a stress tensor inversion of moment tensor solutions reported from the National Research Institute for Earth Science and Disaster Prevention (Japan). The maximum principal stress direction of the western Tottori sequence was estimated as N107°E with a strike–slip regime. In the northern Hyogo swarm, the orientations of the principal stress directions could not be well constrained by the observed data, but after examining the detailed characteristics of the solution, we obtained a most probable solution of N113°E for the σ₁ direction. These solutions are consistent with the maximum horizontal directions roughly estimated from the strike directions of large earthquakes occurring geographically between these two seismic activities. We measured the angle between each fault–slip direction and maximum principal stress direction to investigate the frictional properties of earthquakes. The distribution of the angles was forward modeled to estimate the coefficient of friction and the stress ratio, assuming uniformly distributed fault orientations. For the western Tottori sequence, a homogeneous stress field with a coefficient of friction less than 0.4 was estimated. A high stress level was also suggested because very little change occurred in the stress field during the mainshock. For the northern Hyogo sequence, the coefficient of friction was estimated to be between 0.5 and 1.0.     

The 2003 earthquake swarm in Anjalankoski, south-eastern Finland

During May 2003 a swarm of 16 earthquakes (M_L = 0.6–2.1) occurred at Anjalankoski, south-eastern Finland. The activity lasted for three weeks, but additional two events were observed at the same location in October 2004. A comparison of the waveforms indicated that the source mechanisms and the hypocentres of the events were nearly identical.A relative earthquake location method was applied to better define the geometry of the cluster and to identify the fault plane associated with the earthquakes. The relocated earthquakes aligned along an ENE–WSW trending zone, with a lateral extent of about 1.0 km by 0.8 km. The relative location and the waveform-modelling of depth sensitive surface wave (Rg) and S-to-P converted body wave (sP) phases indicated that the events were unusually shallow, most likely occurring within the first 2 km of the surface. The revised historical earthquake data confirm that shallow swarm-type seismicity is characteristic to the area.The focal mechanism obtained as a composite solution of the five strongest events corresponds to dip-slip motion along a nearly vertical fault plane (strike = 250°, dip = 80°, rake = 90°). The dip and strike of this nodal plane as well as the relocated hypocentres coincide with an internal intrusion boundary of the Vyborg rapakivi batholith.The events occur under a compressive local stress field, which is explained by large gravitational potential energy differences and ridge-push forces. Pore-pressure changes caused by intrusion of ground water and/or radon gas into the fracture zones are suggested to govern the swarm-type earthquake activity.     

Structural controls on gold mineralisation and the nature of related fluids of the Paiol gold deposit, Almas Greenstone Belt, Brazil

Chemical analyses suggest that the metavolcanic rocks of the Almas Greenstone Belt (AGB), Tocantins State, Brazil have a continental affinity, possibly related to a continental rift environment. They were metamorphosed to amphibolite facies during a regional tectono-metamorphic event (D_n), retrogressed to greenschist facies assemblages and then hydrothermally altered within dextral strike–slip shear zones (D_n+1). Fracture sets related to D_n+2 intersect S_n+1.The Paiol Gold Mine is one of several mineralised zones within metabasic and meta-intermediate rocks of the AGB. It exploits shoots of sulphide–Au–quartz mineralisation that occupy dilational zones approximately perpendicular to an elongation lineation (L_n+1) within mylonitic foliation S_n+1 (S_n+1=S within the S–C fabric). The dilational zones probably formed due to dextral displacement on sinistrally en echelon C surfaces. Minor amounts of gold may have been introduced or remobilised during D_n+2.Coexisting primary and pseudosecondary fluid inclusions in mineralised quartz veins from ore shoots comprise a high-salinity three-phase type (Type II) and a lower salinity two-phase type (Type I). Homogenisation temperatures for Type II inclusions range from 200 to 410 °C and Type I from 90 to 320 °C. The inclusions and their temperature ranges are believed to reflect heat exchange and some mixing between the two fluid types under relatively constant ambient temperatures, but variable (though broadly declining) fluid temperatures. This took place late in D_n+1 in conjunction with greenschist facies retrogression and localised hydrothermally induced metasomatism.     

The 2002 Molise earthquake sequence: What can we learn about the tectonics of southern Italy?

On October 31, 2002 a M_L = 5.4 earthquake occurred in southern Italy, at the margin between the Apenninic thrust belt (to the west) and the Adriatic plate (to the east). In this area, neither historical event nor seismogenic fault is reported in the literature. In spite of its moderate magnitude, the earthquake caused severe damage in cities close to the epicenter and 27 people, out of a total of 29 casualties, were killed by the collapse of a primary school in S. Giuliano di Puglia. By inverting broadband regional waveforms, we computed moment tensor solutions for 15 events, as small as M_L = 3.5 (M_w = 3.7). The obtained focal mechanisms show pure strike-slip geometry, mainly with focal planes oriented to NS (sinistral) and EW (dextral). In several solutions focal planes are rotated counterclockwise, in particular for later events, occurring west of the mainshock. From the relocated aftershock distribution, we found that the mainshock ruptured along an EW plane, and the fault mechanisms of some aftershocks were not consistent with the mainshock fault plane. The observed stress field, resulting from the stress tensor inversion, shows a maximum principal stress axis with an east–west trend (N83°W), whereas the minimum stress direction is almost N–S. Considering both the aftershock distribution and moment tensor solutions, it appears that several pre-existing faults were activated rather than a single planar fault associated with the mainshock. The finite fault analysis shows a very simple slip distribution with a slow rupture velocity of 1.1 km/s, that could explain the occurrence of a second mainshock about 30 h after. Finally, we attempt to interpret how the Molise sequence is related to the normal faulting system to the west (along the Apennines) and the dextral strike-slip Mattinata fault to the east.     

Neotectonic evolution of the Central Betic Cordilleras (Southern Spain)

Paleostress orientations were calculated from fault-slip data of 36 sites located along a traverse through the Central Betic Cordilleras (southern Spain). Heterogeneous fault sets, which are frequent in the area, have been divided into homogeneous subsets by cross-cutting relationships observed in the field and by a paleostress stratigraphy approach applied on each individual fault population. The state of stress was sorted according to main tectonic events and a new chronology is presented of the Miocene to Recent deformation in the central part of the Betic Cordilleras. The deviatoric stress tensors fall into four distinct groups that are regionally consistent and correlate with three Late Oligocene–Aquitanian to Recent major tectonic events in the Betic Cordilleras. The new chronology of the neotectonic evolution includes, from oldest to youngest, the following main tectonic phases:

(1) Late Oligocene–Aquitanian to Early Tortonian: σ₁ subhorizontal N–S, partly E–W directed, σ₃ subvertical; compressional structures (thrusting of nappes, large-scale folding) and strike-slip faulting in the Alborán Domain and the External Zone of the Betic Cordilleras;

(2) Early Tortonian to Pliocene–Pleistocene: σ₁ subvertical, σ₃ subhorizontal NW–SE, partly N–S directed or E–W-directed (radial extension); large-scale normal faulting in the Central Betic Cordilleras and in the oldest Neogene formations of the Granada Basin related to the gravitational collapse of the Betic Cordilleras and the exhumation of the intensely metamorphosed rock series of the Internal Zones, at the same time formation of the Alborán Basin and intramontane basins such as the Granada Basin;

(3) Pleistocene to Recent: (3a) σ₁ subvertical, σ₃ subhorizontal NE–SW with prominent normal faulting, but coevally; (3b) σ₁ subhorizontal NW directed, σ₃ NE–SW subhorizontal with strike-slip faulting. Extensional structures and strike-slip faulting are related to the ongoing convergence of the Eurasian and African Plates and coeval uplift of the Betic Cordilleras. Reactivation of pre-existing fractures and faults was frequently observed. Phase 3 is interpreted as periodic strike-slip and normal faulting events due to a permutation of the principal stress axes, mainly σ₁ and σ₂.

Fault slip analysis of Quaternary faults in southeastern Korea

The Quaternary stress field has been reconstructed for southeast Korea using sets of fault data. The subhorizontal direction of the maximum principal stress (σ₁) trended ENE and the direction of the minimum principal stress (σ₃) was nearly vertical. The stress ratio (Φ = (σ₂ − σ₃) / (σ₁ − σ₃)) value was 0.65. Two possible interpretations for the stress field can be made in the framework of eastern Asian tectonics; (1) The σ_Hmax trajectory for southeast Korea fits well with the fan-shaped radial pattern of maximum principal stress induced by the India–Eurasia collision. Thus, we suggest that the main source for this recent stress field in southeast Korea is related to the remote India–Eurasia continental collision. (2) The stress field in Korea shows a pattern similar to that in southwestern Japan. The origin for the E–W trending σ_Hmax in Japan is known to be related to the mantle upwelling in the East China Sea. Thus, it is possible that Quaternary stress field in Korea has evolved synchronously with that in Japan. We suggest further studies (GPS and in situ stress measurement) to test these hypotheses.