共查询到17条相似文献,搜索用时 109 毫秒
1.
滇中昆阳群因民角砾岩及其成因 总被引:4,自引:0,他引:4
“因民角砾岩”的成因问题是一个争论已久的问题,至今仍未有统一的认识。笔者通过对滇中和东川地区“因民角砾岩”的观察,对其进行了详细的分类。根据其成因划分为沉积砾岩(包括复成分砾岩、滑塌角砾岩与石英砾岩)、火山角砾岩与构造角砾岩(包括断层角砾岩与水力张裂角砾岩)。对“因民角砾岩”成因的研究,特别是“水力张裂角砾岩”的提出,对于解决昆阳群的地层层序,了解滇中元古宙地壳演化以及进一步找矿都具有重要的意义。 相似文献
2.
3.
胡西顺 《有色金属矿产与勘查》1998,7(6):356-362
柞山地区钠长碳酸角砾岩是汉体隐爆角砾岩。岩石化学特征反映钠长碳酸角砾岩不同于沉积碳酸盐岩,而与岩浆碳酸岩基本一致。稳定同位素资料表明,钠长碳酸角砾岩的物质来源既有深源岩浆,也有基底地层。稀土元素特征反映出钠长碳酸角砾岩与岩浆活动有成因联系。在此认识的基础上,结合其地质特征探讨了钠长碳酸角砾岩的形成机制。 相似文献
4.
5.
6.
7.
隗合明 《矿物岩石地球化学通报》1995,(1)
西天山博罗霍洛一带蓟县纪角砾岩成因类型及其研究意义隗合明(西安地质学院,西安710054)关键词蓟县系,角砾岩,西天山西天山博罗霍洛一带蓟县系库松木契克群中有大量角砾岩。研究表明,这些角砾岩具有不同的成因类型,其形成和分布与沉积环境、古构造和海底喷气... 相似文献
8.
含金热液隐爆角砾岩的特征及研究意义 总被引:7,自引:0,他引:7
唐菊兴 《成都理工学院学报》1995,22(3):59-64
含金热液隐爆角砾岩可划分为岩浆热液隐爆角砾岩、岩浆-天水混合热液隐爆角砾岩和天水热液隐爆角砾岩。隐爆角砾岩最重要的特征为:形似厚板状、筒状,角砾岩中含有大量岩粉,矿物的快速沉淀。热液体系的减压扩容、流体的沸腾和去气(CO2)作用引起了隐爆角砾岩化。金常富集在隐爆中心附近。对隐爆角砾岩的研究将有助于判断金矿体的剥蚀程度、矿头和矿尾的位置,有助于布置勘探工程,有助于对金沉淀机制的研究和深部预测。 相似文献
9.
10.
11.
河南嵩县祁雨沟金矿区四号角砾岩筒是燕山晚期中酸性岩浆超浅成侵位而形成的隐爆-坍塌型角砾岩筒,第一期矿化形成受角砾岩筒形态制约的不规则状胶结物型金矿体,第二期矿化形成受断裂裂隙制约的脉状矿体。前者主要受角砾岩筒本身的形态制约,形成不规则状矿体;后者受制于剪切裂隙系统,形成含金石英-多金属硫化物脉状金矿体。两种不同的矿化类型在垂向上存在明显分带性。在490m中段以下主要为受角砾岩筒形态控制的不规则状胶结物型金矿体,490m中段以上则逐渐过渡为受叠加裂隙控制的脉状矿体。 相似文献
12.
13.
14.
15.
隐爆角砾岩型金矿研究述评 总被引:22,自引:1,他引:22
隐爆角砾岩型金矿是国内外一种具有重要经济价值的矿床类型。不同类型隐爆角砾岩是该类金矿最主要的容矿围岩。造成隐爆作用发生最直接的因素是受热的多源流体或气体,岩浆隐蔽爆破主要作用方式是气爆和浆爆,其次是热液注入。通常气爆发生于早期,浆爆较晚,而热液注入最晚。浅成-超浅成中酸性斑岩体是隐爆角砾岩形成的决定性因素,气液的隐蔽爆破作用是隐爆角砾岩有角砾岩型金-多金属矿床形成的原因,成岩与成矿是同一地质过程不同阶段产物。不同级别的构造对该类型金矿档的产出空间、矿化类型和矿体形态等具有分级控制作用,矿化、蚀变存在明显的垂向分带及其空间套叠。该类型金矿可划分为Au-Ag和Au-Cu系列,矿床系列、矿床规模有富矿部位可通过一系列指标进行判别。 相似文献
16.
老鸭巢铅锌金多金属矿床中的岩体超覆侵入时形成了一系列角砾岩,其中岩浆隐蔽爆破角砾岩就是矿床铅锌金矿体主要赋矿构造.隐蔽爆破角砾岩可分为隐爆角砾、震碎角砾、流化角砾.老鸭巢矿区广泛分布着晚三叠世-中侏罗世的古岩溶沉积体,这些沉积的孔隙度高且富含地下水.当岩浆超覆侵入此处时,由于外部环境发生急剧变化,岩浆减压、降温、二次沸腾,并不断析出流体,在局部圈闭环境下流体压力将逐渐增大;加之岩溶中地下水丰富,地下水不断的气化,使气体的压力骤然增大.在屏蔽作用良好的超覆部发生了爆破作用形成了隐爆角砾;在爆破的外部震碎带形成了震碎角砾;而爆破之后的流化作用则形成了流化角砾.通过对老鸭巢爆破角砾岩的特征的研究,结合爆破角砾岩形成的地层、构造、岩体等条件的分析来探讨隐蔽爆破角砾岩的形成过程.分析了老鸭巢铅锌金矿体与隐蔽爆破角砾岩的关系,为今后矿山找矿提供服务. 相似文献
17.
YAN Fengzeng 《《地质学报》英文版》2000,74(3):554-558
Abstract The Puziwan gold deposit is a special linear cryptoexplosive breccia type deposit found in northeastern Shanxi, China, in recent years. The deposit is located in a secondary metallogenic belt of the most famous Au‐Ag polymetallic metallogenic belt along the north margin of the North China platform. The secondary metallogenic belt is a synmagmatic tension‐shear fault‐fracture belt of ENE linear trend. The Indosinian cryptoexplosive breccia body, quartz monzonitic porphyry (beschtauite breccia), quartz monzonite (243.7 Ma, K‐Ar), Yanshanian granite‐porphyry (105±6 Ma, Rb‐Sr) and orebodies mostly occur as dykes or veins and short lenses along the structural fracture belt. The orebodies are emplaced in the fractured cryptoexplosive breccia body in the tectonomagmatic belt and their attitude is consistent with that of the breccia body. The orebodies have two types: one is shallow‐seated thick and big ones, which are short‐lenticular in plan and wedge‐shaped in cross section, shallow buried, large in size and high‐grade; the other is lean orebodies, which occur as parallel veins at depths. The ores are mainly of Au‐Ag polymetallic sulphide‐rich breccia type. Pyrite (limonite) is the dominant metallic mineral, with subordinate chal‐copyrite, galena, sphalerite, tenantite, native gold, electrum, native silver and argentite. The gangue minerals consist mainly of quartz and plagioclase, with subordinate carbonate minerals, alunite chalcedony and kaolin. Kaolinization is the characteristic alteration type. Sulphide minerals contain abundant trace minerals such as Cu, Pb, Ag, Sb and Hg, while in the ores Ag, Cu, Pb, Zn, As and Sb are the best indicator element assemblage of Au. The δ34S(%o) values of the ores rane from ?3.2%o to 5.3%o, with average ?0.102%o. The δO H2O(%o) and δ(%o) values are in the ranges from ?3.1%o to 7.73%o and from ?64%o to ?90%o respectively. The Pb isotopic compositions of the rocks and ores in this region indicate that Pb comes from three tectonic sources—upper mantle, lower crust and orogenic belt. The inclusion homogenization temperature are in the ranges of 110 to 220°C and 230 to 310°C, which suggests that the deposit formed under meso‐epithermal conditions. The ore‐forming pressures range from 6 to 32 MPa and the depths are 230 to 1200 m. In view of the above, the Puziwan gold deposit is genetically ascribed to a high‐sulphur (alunite‐kaolin) meso‐epithermal gold deposit related to subvolcanic rocks. This gold deposit formed during the Indosinian stage (245.9±0.3 Ma) and then was influenced by a thermal event in the Yanshanian stage (142.9±0.5 Ma). 相似文献