Variscan geodynamic evolution of the Carnic Alps (Austria/Italy)

The South-Alpine Carnic Alps are part of the southern flank of the European Variscides and display a continuous sedimentary record from Late Ordovician to Devonian times followed by Carboniferous S-directed nappe stacking and Late Carboniferous to Early Permian post-collisional collapse. The tectonometamorphic and sedimentary evolution of the Carnic Alps resembles a continuous process where pre- and syn-orogenic volcanism, syn-orogenic flysch sedimentation, deformation including nappe stacking, metamorphism and tectonic collapse shift in age from internal zones in the N towards external zones in the S. New structural, petrological and sedimentological data are presented concerning the tectonometamorphic history of the Carnic Alps. We distinguish three thrust sheets or tectonic nappes differing in their stratigraphic, sedimentological, deformational and metamorphic histories which were thrust over each other in Carboniferous times. Our data lead to a new geodynamic model showing an evolution from rifting or back-arc spreading in the Late Ordovician to the establishment of a mature passive continental margin in the Late Devonian/Early Carboniferous, flysch sedimentation in an active continental margin setting during the Visean/Namurian and finally collision during the Late Carboniferous between the northern margin of Gondwana and a microcontinent to the N.     

Terrestrial laser scanning for rockfall stability analysis in the cultural heritage site of Pitigliano (Italy)

Traditional surveying methods are often not sufficient to achieve a complete geomechanical characterization of the rock mass, to analyze the instability mechanisms threatening the cultural heritage of hilltop historic towns. In Pitigliano (Tuscany, Central Italy), terrestrial laser scanning was employed complementarily to conventional geomechanical techniques. The overall 3D survey of the exposed surfaces was combined with scanlines of the inner walls of the subterranean cavities running underneath the historic centre. The rock mass discontinuities geometry was extracted, and the most critical instability mechanisms were mapped, with particular interest in the potential impacts on the ancient buildings located along the cliff edge. The geomechanical analysis of the surveyed joint sets confirmed a structural control on the cliff morphology by two main joint sets. Thanks to the laser scanner-based kinematic analysis, flexural toppling and wedge failure were found as the main hazardous instability mechanisms in Pitigliano. Finally, the conservation criticalities were identified and a pilot monitoring system was installed in a sector highly susceptible to block detachment.     

Dynamics and mass balance of the 2007 Cima Una rockfall (Eastern Alps, Italy)

On October 12th, 2007 about 40,000 m³ of dolomitic rock detached from the northern wall of the peak known as “Cima Una” (Val Fiscalina, Sesto Dolomites, Bolzano, Italy), and fell 900 m to Fiscalina Valley below. The event generated a dense dust cloud, which traveled up to 4 km from the source area. The failure surface was formed by two near-vertical surfaces, almost perpendicular to each other. The orientation of these surfaces is consistent with two of the main regional tectonic sets. Only a small portion of the fallen material appeared to be preserved as blocks deposited at the base of the rock wall. About a fifth of the fallen mass was deposited on a colluvial cone. The missing mass, estimated to be about 80 %, may be represented by highly fragmented rock in part deposited as sand on the valley floor and in part dispersed as a dense dust cloud generated during the rockfall. There appears to be a deficit of deposited material, which could lead underestimation in the calculation of rock–cliff recession rates. The dynamics of the rockfall, strongly conditioned by the local topography, partially explains the intense rock breakage and the generation of the dust cloud. The rockfall was not caused by an external trigger, such as an earthquake or heavy rainfall; the failure was most likely progressive due to mechanical and physical degradation along highly stressed failure surfaces, possibly promoted by permafrost degradation and freeze and thaw processes.     

Subsurface thermal conductivity assessment in Calabria (southern Italy): a regional case study

Determining the suitability of a local area at a regional or local scale for the geothermal application of low enthalpy systems requires the knowledge of rock thermal conductivity values to evaluate the possibility of low-enthalpy heat exchange. A digital cartographic tool is also needed to synthesize the thermal properties of the underground. This tool should be easily accessible and upgradeable and thus suitable for territorial planning and environmental control. In order to address these key issues, a methodological approach was developed within the framework of the national VIGOR Project, dedicated to evaluating the geothermal potential in southern Italy. In this paper the region of Calabria was selected as a case study. Around 70 samples that were representative of the main geological formations were collected from all over the area. Thermal property tests were carried out both in dry and wet conditions, using a thermal device in accordance with the modified transient plane source method. The thermal conductivity values were then compared with data from the international literature. In order to consider the influence of the entire stratigraphic sequence on the thermal conductivity parameters, a geostatistical analysis of the available lithostratigraphic data was performed using the MATLAB toolbox Modalstrata, specially developed for this purpose. A comprehensive geothermal subsurface characterization of Calabria was thus obtained.     

Provenance of Palaeozoic sandstones from the Carnic Alps (Austria): petrographic and geochemical indicators

An integrated approach of petrographic analysis, whole rock geochemistry and microprobe analysis has been applied to obtain information on the geodynamic development and the provenance for Ordovician to Permian siliciclastic successions exposed within the Carnic Alps (Austria). Sandstone detrital mode and geochemical results refine previous geodynamic interpretations. Late Ordovician samples indicate a stable craton and recycled orogenic and, possible, extensional setting. The Early Carboniferous is interpreted to represent a compressional environment, followed by a Late Carboniferous molasse-type foreland basin, and a Permian extensional geodynamic setting. Contrasting geochemical patterns of post-Variscan and Permian sequences suggest a rift setting. Electron microprobe data of detrital white mica also indicate changes in the provenance. Compositional data reflect a shift from low- to medium-grade metamorphic (Ordovician) to high-grade metamorphic (Carboniferous) to low- to medium-grade metamorphic and plutonic source rocks (Permian). Additionally, our data show that various chemical discrimination diagrams do not include all possible ranges of sandstones, and that high contents of detrital mica and ultra-stable heavy minerals may cause misclassification. Consequently, we propose the use of multi-method approach for provenance studies, including the control of geochemical data by modal analysis and heavy mineral investigations.     

Insight into the development of a carbonate platform through a multi-disciplinary approach: a case study from the Upper Devonian slope deposits of Mount Freikofel (Carnic Alps,Austria/Italy)

The development and behavior of million year-scaled depositional sequences recorded within Palaeozoic carbonate platform has remained poorly examined. Therefore, the understanding of palaeoenvironmental changes that occur in geological past is still limited. We herein undertake a multi-disciplinary approach (sedimentology, conodont biostratigraphy, magnetic susceptibility (MS), and geochemistry) of a long-term succession in the Carnic Alps, which offers new insights into the peculiar evolution of one of the best example of Palaeozoic carbonate platform in Europe. The Freikofel section, located in the central part of the Carnic Alps, represents an outstanding succession in a fore-reef setting, extending from the Latest Givetian (indet. falsiovalis conodont zones) to the Early Famennian (Lower crepida conodont zone). Sedimentological analysis allowed to propose a sedimentary model dominated by distal slope and fore-reef-slope deposits. The most distal setting is characterized by an autochthonous pelagic sedimentation showing local occurrence of thin-bedded turbiditic deposits. In the fore-reef slope, in a more proximal setting, there is an accumulation of various autochthonous and allochthonous fine- to coarse-grained sediments originated from the interplay of gravity-flow currents derived from the shallow-water and deepwater area. The temporal evolution of microfacies in the Freikofel section evolves in two main steps corresponding to the Freikofel (Unit 1) and the Pal (Unit 2) limestones. Distal slope to fore-reef lithologies and associate changes are from base to top of the section: (U1) thick bedded litho- and bioclastic breccia beds with local fining upward sequence and fine-grained mudstone intercalations corresponding, in the fore-reef setting, to the dismantlement of the Eifelian–Frasnian carbonate platform during the Early to Late Frasnian time (falsiovalis to rhenana superzones) with one of the causes being the Late Givetian major rift pulse; (U2) occurrence of thin-bedded red nodular and cephalopod-bearing limestones with local lithoclastic grainstone intercalations corresponding to a significant deepening of the area and the progressive withdrawal of sedimentary influxes toward the basin, in relation with Late Frasnian sea-level rise. MS and geochemical analyses were also performed along the Freikofel section and demonstrate the inherent parallel link existing between variation in MS values and proxy for terrestrial input. Interpretation of MS in terms of palaeoenvironmental processes reflects that even though distality remains the major parameter influencing MS values, carbonate production and water agitation also play an important role.     

Geotechnical characterization and rockfall simulation of a slope: a practical case study from South Tyrol (Italy)

Rockfalls occur often along the state road SS241 Val d'Ega in the Val d'Ega Valley (South Tyrol, Italy). In order to protect the road and the traffic, stabilization works are necessary. Detailed geological and geomorphologic mapping along structural and geomechanic sections was carried out, and experimental rockfall trails were examined on the slope above the state road between km 3.550 and 3.830. Rockfall simulation, rock mass classification and an interpretation of field data, especially concerning joints, wrapped up the investigations. They helped find the specific need for stabilization work and its positioning along the slope. The stabilization works were completed on February 2002. Another important aspect concerns ongoing geotechnical investigations and stabilization works urgently realised during autumn 1999.

This paper is a practical approach in solving rockfall problems along public roads. It should be considered as a workbook for university personnel and also for professional geologists.     

Terrestrial laser scanning survey in support of unstable slopes analysis: the case of Vulcano Island (Italy)

Natural Hazards - The capability to measure at distance dense cloud of 3D point has improved the relevance of geomatic techniques to support risk assessment analysis related to slope instability....     

Landslides in Emilia-Romagna region (Italy): strategies for hazard assessment and risk management

In Emilia-Romagna, over 32,000 landslide bodies cover one-fifth of the hilly and mountainous territory. The majority of them originated as earth-flows after the last glacial maximum and grew during the rainiest periods of the Holocene through the superimposition of new earth-flows. Reactivation of these large landslides is the main problem the geologists of Emilia-Romagna are facing now. Intense and/or prolonged precipitation play a major role as triggering factors in reactivating landslide bodies, but also the importance of snowmelt is suggested by the monthly distribution of landslide events. Almost all the present-day landslide activity is due to the reactivation of pre-existing landslide bodies. Consequently, territorial planning and geo-thematic cartography are fundamental tools for the reduction of risk. The Emilia-Romagna geo-thematic cartography (1:10,000) is legally binding and regulates land use in regional, municipal and basin plans.     

断裂性质与滑坡分布的关系——以汶川地震中的大型滑坡为例

美姑河流域地处全球滑坡灾害密集的云贵高原与川西南山地过渡带,该地区因地貌类型特殊,大型-巨型滑坡数量多、危害重、成因机理复杂,成为河谷区重大工程和城镇建设的安全隐患。笔者在国内外古滑坡研究成果分析的基础上,总结了美姑河流域古滑坡时空展布、滑坡对顺构造地貌响应、滑坡孕灾-控灾机理,滑坡成灾模式与主控因素等方面的研究进展。结合当前滑坡防灾减灾实际需求,提出美姑河流域顺构造地貌控制下古滑坡孕灾模式研究的3个优选方向：(1)不同发育强度的顺构造地貌对滑坡孕灾-控灾模式,(2)构造差异隆升对顺构造地貌区大型滑坡发育的孕灾模式,(3)通过古滑坡年代学研究建立断裂、褶皱、古地震和古气候变化与滑坡发育的对应联系。破解这些研究方向的关键科学问题,将为西南山区古滑坡研究及防灾减灾起到积极指导作用。     

Comparison of rockfall susceptibility assessment at local and regional scale: a case study in the north of Beijing (China)

This study shows a rockfall susceptibility assessment at local scale in north Beijing of China, including the identification of rockfall sources onsite by terrain and rock discontinuities analysis and run-out distance prediction by Rocfall^? simulation. Two types of rockfall were defined including one type on the cliffs with long inclined slopes and another type on the road slopes with low height. Two historical rockfall events were used to back-calibrating the parameters used for run-out distance simulation. Based on the work, rockfall susceptibility map at local scale was created in GIS, which was compared with the map obtained at regional scale (entire Huairou district scale). Due to the difference of approaches applied, procedure of assessment and types of source data acquired, the two resulting rockfall susceptibility maps are proved to be different. Still, both of them are useful and could be used at different level’s decision for rockfall prevention and mitigation. Different types of uncertainties exist in the study of rockfall susceptibility assessment. To reduce the uncertainties, studies on both approaches and techniques are suggested.     

Dating synmagmatic folds: a case study of Schlingen structures in the Strona-Ceneri Zone (Southern Alps, northern Italy)

The Strona-Ceneri Zone (Southern Alps) contains folds with moderately to steeply inclined axial planes and fold axes, and amplitudes of up to several kilometres (so-called 'Schlingen'). These amphibolite facies folds deform the main schistosity of Late Ordovician metagranitoids and are discordantly overlain by unmetamorphic Permian sedimentary rocks. Mutually cross-cutting relationships between these folds and garnet-bearing leucotonalitic dykes indicate that these dykes were emplaced during folding. Sm–Nd systematics and the strongly peraluminous composition of these dykes point to an anatectic origin. Pb step leaching of magmatic garnet from a leucotonalitic dyke yielded a 321.3±2.3  Ma intrusive age. Rb–Sr ages on muscovites from leucotonalitic dykes range from 307 to 298  Ma, interpreted as cooling ages during retrograde amphibolite facies metamorphism. Conventional U–Pb data of zircons from an older granodioritic dyke that pre-dates the Schlingen folds yielded discordant U–Pb ages ranging from 371 to 294  Ma. These ages reflect a more complicated multi-episodic growth history which is consistent with the observed polyphase structural overprint of this dyke. Schlingen folding was accompanied by prograde amphibolite facies metamorphism, during the thermal peak of which the leucotonalitic dyke material was generated by partial melting in a deeper source region from where these S-type magmas intruded the presently exposed level. Because partial melting may occur in a relatively late stage of a clockwise P–T–t path, or even during decompression on the retrograde path, we do not exclude the possibility that Schlingen folding had already started in Early Carboniferous time. Schlingen folds also occur in Penninic and Austroalpine basement units with a very similar pre-Alpine history, indicating that Variscan folding affected large segments of the future Alpine realm.     

单体危岩崩塌灾害风险评价方法——以四川省丹巴县危岩崩塌体为例

综合分析国内外危岩崩塌风险评价方法的基础上,以丹巴县双拥路危岩崩塌体为例,提出了适用于单体危岩崩塌的风险评价方法。根据蒙特卡洛法的基本原理及方法编制了危岩崩塌体的稳定性可靠度分析程序,计算了不同工况下危岩失稳的概率。同时,考虑地面建筑物对落石的阻挡影响,利用专业软件模拟落石的运动轨迹,并根据研究区的地形地貌特点进一步确定了落石的影响范围。在野外调查和收集当地社会经济资料的基础上,开展了承灾体的易损性研究,对资产的易损性进行了评价。根据危岩失稳的概率及承灾体的易损性分析,进一步得到不同工况下落石影响区内承灾体的经济损失水平,对危岩崩塌灾害的风险进行了定量评价。风险评价的结果可为危岩崩塌灾害影响区的城镇建设和规划提供科学依据,从而有效地规避风险和减灾防灾。     

单体危岩崩塌灾害风险评价方法——以四川省丹巴县危岩崩塌体为例

综合分析国内外危岩崩塌风险评价方法的基础上,以丹巴县双拥路危岩崩塌体为例,提出了适用于单体危岩崩塌的风险评价方法。根据蒙特卡洛法的基本原理及方法编制了危岩崩塌体的稳定性可靠度分析程序,计算了不同工况下危岩失稳的概率。同时,考虑地面建筑物对落石的阻挡影响,利用专业软件模拟落石的运动轨迹,并根据研究区的地形地貌特点进一步确定了落石的影响范围。在野外调查和收集当地社会经济资料的基础上,开展了承灾体的易损性研究,对资产的易损性进行了评价。根据危岩失稳的概率及承灾体的易损性分析,进一步得到不同工况下落石影响区内承灾体的经济损失水平,对危岩崩塌灾害的风险进行了定量评价。风险评价的结果可为危岩崩塌灾害影响区的城镇建设和规划提供科学依据,从而有效地规避风险和减灾防灾。     

Provenance of Oligocene synorogenic sediments of the Ligurian Alps (NW Italy): inferences on belt age and cooling history

Mineral chemistry, ⁴⁰Ar/³⁹Ar geochronology on white micas and Apatite Fission Track Thermochronology (AFTT), are applied here to study the provenance of the synorogenic Molare Formation (lowermost unit of the Tertiary Piedmont Basin clastic sequence). The Molare Formation was deposited during transgression onto the Ligurian Alps nappe stack in the Early Oligocene. Depositional facies show that clastic distribution remained transversal, with local sources located just landward from the coastline. Phengite mineral chemistry together with ⁴⁰Ar/³⁹Ar data clearly shows two distinctive source areas, each one mirroring the composition of the basement directly beneath the clastic sequence. Amphibole mineral chemistry allows second order provenance distinctions within each sector, reflecting heterogeneous metamorphic evolution of the bedrock complexes. Integrated ⁴⁰Ar/³⁹Ar dating and AFTT suggest that, following a fast cooling/exhumation episode of the Ligurian Alps during the Oligocene, very little net uplift has since occurred. This is due to a period of general subsidence from the Oligocene–Late Miocene followed by comparable uplift from Late Miocene–Pliocene to the present. In general our data provide an image of the Ligurian Alps during the Oligocene, which is very similar to the present-day one.This revised version was published online in September 2003.     

Testing a new hybrid approach to seismic hazard assessment: an application to the Calabrian Arc (Southern Italy)

We tested a new hybrid method for the evaluation of seismic hazard. A recently proposed fault segmentation and earthquake recurrence model of peninsular Italy suggests that the interval for which the local historical catalogue is complete is shorter than the mean recurrence time of individual large faults (1000 years), or at the most comparable. These new findings violate the fundamental assumption of historical probabilistic seismic hazard methods that the historical record is representative of the activity of all the seismogenic sources. The hybrid method we propose uses time-dependent modelling of the major earthquakes and catalogue-based historical probabilistic estimates for all minor events. We assume that the largest earthquakes are characteristic for individual discrete fault segments, model their probability of occurrence by a renewal process and compute the shaking associated with each of them with a simplified procedure. Then we calculate the probability of exceeding a given threshold of peak ground acceleration for specific sites as the aggregate probability of occurrence of large characteristic earthquakes and minor shocks. We apply the method to the Calabrian Arc (Southern Italy) performing the calculations for five major towns. The exposure to seismic hazard of Reggio Calabria, Catanzaro and Vibo Valentia, which locate close to recently activated large faults, decreases with respect to traditional time-independent estimates. On the contrary, an increase of seismic hazard is obtained for Castrovillari, which locates in an area where large faults displaying Holocene activity have been recently recognized but no significant earthquake is reported in the historical catalogue. Cosenza has the highest probability to experience a significant peak ground acceleration with both the new hybrid and the traditional approaches. We wish to stress that the present results should be interpreted only in terms of the differences between the new hybrid and the traditional approaches, not for their absolute values, and that they are not intended to be used for updating or modifying the current national seismic zonation.     

Susceptibility analysis for slides and rockfall: an example from the Northern Calcareous Alps (Vorarlberg, Austria)

In this paper a tool for semi-quantitative susceptibility assessment at a regional scale is presented which is applicable at areas with complex geological setting. At a study area within the Northern Calcareous Alps geotechnical mappings were implemented into a Geographical Information System and analysed as grid data with a cell size of 25 m. The susceptibility to sliding and falling processes was considered according to five classes (very low, low, medium, high, very high). Susceptibility to sliding was analysed using an index method. The layers of lithology, bedding conditions, tectonic faults, slope angle, slope aspect, vegetation and erosion were combined iteratively. Dropout zones of rockfall material were determined with help of a Digital Elevation Model. The movement of rolling rock samples was modelled by a cost analysis of all potential rockfall trajectories. These trajectories were also divided into five susceptibility classes. The susceptibility maps are presented in a general way to be used by communities and spatial planners. Conflict areas of susceptibility and landuse were located and can be presented destinctively.