Lamellar pyroxene-spinel symplectites in lunar olivine from the Luna 24 regolith

Cr-Ca lamellae in a magnesian olivine grain (section 1611) from the Luna 24 regolith were investigated in detail by electron microprobe analysis (EMPA), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). It was found that the lamellae are parallel to the (100) plane of oxygen closest packing in olivine and consist of regular vermicular intergrowths of two phases, diopside (Di) and chromite (Chr), in the volume proportion Di: Chr ≈ 3: 1. The bulk chemical composition of the lamellae is approximated as Ca₂Mg₂Fe²⁺(Cr³⁺)₂Si₄O₁₆. They are identical in phase composition to type A, F, and E symplectites from Apollo lunar samples [9]. Based on morphology and phase composition, the lamellar aggregates in the olivine grain from the Luna 24 regolith were classified as pyroxene (Px)-spinel (Spl) symplectites of a lamellar type, the formation of which was related to olivine oxidation at IW ≤ logfO₂ ≤ QFM. The obtained data indicate a solid-phase mechanism of lamella formation and the existence of a lamellar precursor phase, which transformed subsequently into the Px-Spl symplectite. It was supposed that uvarovite-knorringite garnet produced by the oxidation of olivine at high pressures and t > 800°C could be the transitional phase during symplectite formation. The subsequent conversion of the garnet into the low-pressure assemblage of Px-Spl symplectites could occur via cellular decomposition in accordance with the reaction Ca₂MgCr₂Si₃O₁₂ + (Mg,Fe)₂SiO₄ = 2CaMgSi₂O₆ + FeCr₂O₄. The reported results are the first data of a detailed nanomineralogical investigation of lamellar Px-Spl symplectites in lunar olivine.     

Petrology of Luna 20 regolith from the lunar highlands

The Luna 20 regolith sample contains crystalline lithic fragments of mare basalt, the anorthosite-norite-troctolite group, and feldspathio basalt. Discrete mineral fragments and mineral fragments in regolith breccias can generally be assigned, based on chemical criteria, to one or the other of the first two rock types. A complex history is indicated for the regolith fragments involving repeated metamorphism and melting of the highlands due to impact events. The glass fragments and the feldspathic basalts probably are the result of this melting and their composition may be representative of a large portion of the regolith at this site.     

Luna 20: mineralogy and petrology of fragments less than 125 μm size

Two milligrams of less than 125 μm size particles from the Luna 20 soil sample (22001,17) have been examined. The results of the mineral identification and analysis verify earlier assumptions that the nature of the lunar highlands is predominantly anorthositic in composition. The presence of highly magnesian clinopyroxene, orthopyroxene and olivine suggests crystallization of Highland rocks in an ultrabasic environment. No fragments were observed that could be unequivocally assigned to mare basalt types.     

The mineralogy and petrology of the Luna 20 soil sample

Fragments of igneous rocks, glasses and minerals comprise 25 per cent of the studied sample of the Luna 20 soil. Basalt fragments in the Luna 20 soil are similar to basalts from the mare regions of the Moon—in that they are characterized by the presence of iron-rich olivines and pyroxenes. On the basis of the FeO contents of plagioclases, it appears possible to distinguish between the plagioclase of the mare and highland regions of the Moon. Other igneous rock fragments are anorthosite, gabbroic anorthosite and anorthositic gabbro. The most abundant rock type (75 per cent of the sample) is microbreceia. One third of the fragments of microbreccia have undergone thermal metamorphism resulting in the homogenization of phases and the development of poikioblastic and hornfelsic textures. Excluding the basalt fragments, the dominant minerals in the Luna 20 soil are anorthite (An_93–98), magnesium-rich orthopyroxenes, intermediate clinopyroxenes and olivine (< Fa₅₀). Chemically, the Luna 20 and Apollo 16 soil samples are similar, but the Luna 20 soil is slightly depleted in aluminum and calcium and enriched in iron and magnesium relative to the Apollo 16 soils. The slight difference in bulk chemistry of the two soils may be a result of the presence of a minor amount of mare material in the Luna 20 soil and its apparent absence in the Apollo 16 soils.     

Mineral phases on the fracture of a glass particle and in the fines of a Luna 24 regolith sample

This paper reports new findings of native molybdenum and iron from Mare Crisium. Native tin, copper, and nickel were detected for the first time in this area of the lunar surface. Native tantalum and indium, intermetallic compound Ta₂Mo, and barium titanate Ba₂TiO₄ were found for the first time on the Moon. The latter two phases were observed for the first time in nature. It was shown that the investigated mineral phases correspond to different genetic groups (preimpact, impact, and postimpact mineral assemblages), which is in general typical of lunar regolith. Based on the morphological features of the identified mineral phases, the history of the formation of impact glass particles was reconstructed in part. They were probably affected by at least three impact events. It was concluded that the peculiar molybdenum geochemical anomaly observed in a group of orange impact glass fragments was not related to the impactor material but rather to the intrinsic enrichment in molybdenum of lunar rocks (target) in the area of the impact events. It was supposed that this enrichment could be of exhalative (fumarole) nature.     

不同粒径的月球橄榄石二向性反射特征研究

研究月表矿物组成和分布,对于探测月表地质构造以及月球的起源和演化具有重要的意义。因此,物质成分探测一直是月球研究的重点课题之一。尽管人类已经能够从月球采集样品进行实验室分析,但遥感技术仍然是研究月球的主要手段。文中主要目的是模拟不同粒径下橄榄石的二向性反射特征。为此,首先提出模拟不同粒径下反射特征的方法,然后利用Hapke模型和Mie散射理论对不同粒径下富铁和富镁橄榄石的二向性反射特征进行了模拟。模拟结果显示,富镁橄榄石的二向性反射率较富铁橄榄石的反射率高。最后,分析了反射率差值和等效粒径的相关性。该结论为选择探月传感器的波段组合、识别橄榄石镁铁含量提供了理论依据,也为应用遥感数据的橄榄石的判别奠定了基础。     

The petrology and geochemistry of Miller Range 05035: A new lunar gabbroic meteorite

Miller Range (MIL) 05035 is a lunar gabbroic meteorite. The mineralogy, Fe/Mn ratios in olivine and pyroxene, bulk-rock chemical composition and the bulk oxygen isotope values (δ¹⁷O = 2.86-2.97‰ and δ¹⁸O = 5.47-5.71‰) are similar to those of other mare basalts, and are taken as supporting evidence for a lunar origin for this meteorite. The sample is dominated by pyroxene grains (54-61% by area mode of thin section) along with large plagioclase feldspar (25-36% by mode) and accessory quartz, ilmenite, spinel, apatite and troilite. The bulk-rock major element composition of MIL 05035 indicates that the sample has a very low-Ti (VLT) to low-Ti lunar heritage (we measure bulk TiO₂ to be 0.9 Wt.%) and has low bulk incompatible trace element (ITE) concentrations, akin to samples from the VLT mare basalt suite. To account for these geochemical characteristics we hypothesize that MIL 05035’s parental melt was derived from a mantle region dominated by early cumulates of the magma ocean (comprised principally of olivine and orthopyroxene). MIL 05035 is likely launch paired with the Asuka-881757 and Yamato-793169 basaltic lunar meteorites and the basaltic regolith breccia MET 01210. This group of meteorites (Y/A/M/M) therefore may be a part of a stratigraphic column consisting of an upper regolith environment underlain by a coarsening downwards basalt lava flow.     

Distribution of 28 elements in size fractions of lunar mare and highlands soils

Four volatile, six siderophile and 18 generally lithophile elements were determined in six sieve fractions of mare soil 15100 and seven sieve fractions of highlands soil 66080; 15100 is a moderately and 66080 a highly mature soil.Two size fractions of 66080 were subjected to leaching with HCI and etching with HF. Leaching removed ca. 25% of the rare earths in both the 500-177 μm and 62-20 μm fractions; the soluble phase, probably a phosphate, is enriched in light rare earths relative to the bulk soil. The leach and etch removed a larger portion of Zn and Cd than expected on the basis of surface concentrations inferred from size distribution data apparently because of selective dissolution of minor volatile-rich phases.Lithophile concentrations in 66080 are nearly independent of grain size. In 15100 decreasing grain sizes show moderately increasing amounts of KREEP and anorthosite related elements, and decreasing amounts of basalt related elements. In 66080 a maximum in siderophile concentration occurs at ca 150 μm, as previously observed in our studies of 61220, 63500 and 65500. This peaking appears to result from a gradual increase with time in the size of metal grains as a result of welding during micrometeorite impacts. The coarse fraction maximum is not observed in the siderophile data for 15100, probably because of the much smaller fluence of extralunar projectiles at the Apollo 15 site. A modest rise in siderophile concentrations in the smallest size fractions of all soils probably results from recondensation of impact-vaporized materials.The concentrations of highly volatile Zn, Cd and In in 15100 and 66080 show a marked increase with decreasing size, but the fine/coarse ratios are about a factor of two lower than those in soils 61220 and 63500. The lower ratio in 66080 results entirely from higher concentrations in the coarser fractions. It appears that this is a reflection of the higher maturity of 66080, and that the volume-correlated component in lunar soils increases with increasing near-surface residency. The high amount of volume-correlated component in 15100 may be related to the more efficient formation of agglutinates in basalt-rich soils. The observed increase in rare gas and volatile metal concentration with decreasing grain size results from an increasing bias in surface exposure of fine grain sizes, probably as a result of the adhesion of smaller to larger grains.     

Valence state of iron in a condensate from the Luna 16 regolith

This paper reports the results of an X-ray photoelectron spectroscopic study of the condensate phase of regolith sample L1639 returned by the Luna 16 mission. The reduced Si⁰, Si²⁺, Al⁰, Ti²⁺, and Ti³⁺ forms were detected in the sample. Iron occurs in all valence states, and Fe³⁺ species were detected for the first time in the condensate. Minor Fe³⁺ concentrations were observed in the upper layers of the sample containing the maximum amounts of condensate products. The fraction of ferric Fe is 22%, and the Fe⁰: Fe²⁺: Fe³⁺ proportion is 33: 45: 22. The appearance of ferric Fe in the lunar condensate is explained by the reaction of FeO disproportionation occurring either at the stage of the expansion and cooling of impact-related vapor or directly in the condensed phase on the surface of regolith particles. This interpretation is supported by the results of a model experiment on augite vaporization and condensation. The experiment simulating impact vaporization was carried out on a laser set-up at a temperature of ∼3000–4000 K and a pulse duration of ∼10⁻³ s in a He atmosphere (P = 1 atm). The results of analyses provided compelling evidence that the condensate produced after augite vaporization contains Fe in all oxidation states, and the proportions of different valence forms approach the stoichiometry of the disproportionation reaction.     

The Luna 20 lithic fragments,and the composition and origin of the lunar highlands

Luna 20 soil 22003,1 (250–500 μ) is similar to Apollo 16 soil 61501,47 (250–500 μ) in terms of the percentage of different types of particles. However, among the lithic fragments, the Apollo 16 sample contains a greater percentage of fragments with more than 70 wt. % modal plagioclase and a significantly greater proportion of KREEP-rich particles. Modal analyses of non-mare lithic fragments in Luna 20 and Apollo 11, 14, 15 and 16 indicate that the KREEP-poor highland regions (the bulk of the lunar terrae), though relatively feldspathic, are compositionally inhomogeneous, ranging in plagioclase content from approximately 35 to 100 wt. %. The average plagioclase content lies in the range 45–70 wt.%. Luna 20 pyroxene analyses cluster in two groups, one more magnesian than the other. The groups persist when pyroxene analyses from KREEP-poor noritic, troctolitic and anorthositic lithic fragments from Apollo 11, 14, 15 and 16 and Luna 20 are included. Olivine compositions mimic these pyroxene groups.Within each pyroxene group Cr₂O₃ and TiO₂ decrease as $\text{Fe}\text{(Fe + Mg)}$ increases, suggesting a relationship by fractional crystallization. The two groups suggest that at least two magma compositions were involved. To account for these observations we envisage a Moon-wide magma system in which initial accretionary heterogeneities were imperfectly erased by diffusion and convection. During the cooling of this magma system fractional crystallization was effected by the flotation of plagioclase and sinking of pyroxene, olivine and perhaps ilmenite. The endproduct was an upper layer enriched in plagioclase and a lower layer enriched in mafic silicates. KREEP-rich rocks, which are predominantly noritic in major element composition, may be mechanical mixtures of KREEP-poor norite and material residual after fractional crystallization of the surface magma system.     

He implantation and concentrations in minerals and lunar regolith particles

Solar-wind erosion of rocks on the lunar surface and the implanting of solar-wind particles in minerals of lunar regolith are principally important processes of space weathering. The latter process leads to the accumulation of inert gases in mineral particles of lunar regolith. Literature data indicate that, depending on the composition and structure of the particles, the concentrations of implanted He in various minerals range within roughly three to four orders of magnitude. The lowest He implantation coefficient was determined in amorphous particles (glass), and very low implantation coefficients were also obtained in experiments on He implantation in glass (obsidian).     

Structural state of native molybdenum in the lunar regolith

The structural state was determined for zero-valence molybdenum in the lunar regolith. The body- and face-centered molybdenum forms (BCC and FCC, respectively) were identified. Disruption of the structure down to complete amorphization was noted. This might be caused by the long-term influence of the solar wind.     

The age and petrography of two Luna 20 fragments and inferences for widespread lunar metamorphism

Ages were determined by the ⁴⁰Ar-³⁹Ar method on two metaclastic rocks returned from the lunar highlands north of Mare Fecunditatis by the Luna 20 probe. Both samples gave very well-defined argon retention ages of 3.90 ± 0.04 AE which are indistinguishable from each other within a resolution of 0.02 AE. Both fragments, 22006 and 22007, are highly recrystallized polymict breccias; there is no evidence for loss of radiogenic ⁴⁰Ar, and the age almost surely dates the time of recrystallization. The cosmic ray exposure ages of these fragments are similar and high: 900 million years for 22006, 1300 million years for 22007. 22007 also contains substantial trapped argon with a high ${}^{40}\text{Ar}{}^{36}\text{Ar}$ ratio.The Luna 20 results greatly extend the area of the Moon's surface exhibiting a well-defined record of metamorphism at 3.9 AE. So far, lunar history in the interval 4.6?3.9 AE is not preserved in the ages of surface rocks. This obliteration suggests lunar-wide metamorphic conditions occurring or terminating at this time as a result of major impacts.     

Native ytterbium of regolith AS Luna-24

Native ytterbium first identified in a single brownish orange glass fragment collected from the deepest part (184–189 cm) of the bore core delivered from the Mare Crisium of the Moon to the Earth by the Luna-24 Automatic Station is described. As follows from X-ray elemental maps, the ytterbium grain is metallic. Possible mechanisms of its formation and reasons for its elevated corrosion stability are discussed.     

Trapped solar wind noble gases and exposure age of Luna 16 lunar fines

He, Ne, Ar, Kr and Xe concentrations and isotopic abundances were measured in three bulk grain size fractions prepared from sample L-16-19, No. 120 (C level, 20–22 cm depth) returned by the Luna 16 mission. The expected anticorrelation between the concentrations of trapped solar wind noble gases and grain size is observed. Elemental abundances of solar wind trapped noble gases are similar to those previously found in corresponding grain size fractions of the Apollo 11 and 12 fines. The trapped ratio ${}^4\text{He}{}^{20}\text{Ne}$ varies in the soils from different lunar maria due to diffusion losses. A rough correlation of ${}^4\text{He}{}^{20}\text{Ne}$ with the proportion of ilmenite in these samples is apparent. The elemental and isotopic ratios of the surface correlated noble gases in Luna 16 resemble those previously found in Apollo fines. Based on ²¹Ne, ⁷⁸Kr and ¹²⁶Xe a cosmic ray exposure age of 360 my was determined. This age is similar to those obtained for the soils from other lunar maria.     

Geochemistry, petrology and ages of the lunar meteorites Kalahari 008 and 009: New constraints on early lunar evolution

Kalahari 008 and 009 are two lunar meteorites that were found close to each other in Botswana. Kalahari 008 is a typical lunar anorthositic breccia; Kalahari 009 a monomict breccia with basaltic composition and mineralogy. Based on minor and trace elements Kalahari 009 is classified as VLT (very-low-Ti) mare basalt with extremely low contents of incompatible elements, including the REE. The Lu-Hf data define an age of 4286 ± 95 Ma indicating that Kalahari 009 is one of the oldest known basalt samples from the Moon. It provides evidence for lunar basalt volcanism prior to 4.1 Ga (pre-Nectarian) and may represent the first sample from a cryptomare. The very radiogenic initial ¹⁷⁶Hf/¹⁷⁷Hf (εHf = +12.9 ± 4.6), the low REE, Th and Ti concentrations indicate that Kalahari 009 formed from re-melting of mantle material that had undergone strong incompatible trace element depletion early in lunar history. This unusually depleted composition points toward a hitherto unsampled basalt source region for the lunar interior that may represent a new depleted endmember source for low-Ti mare basalt volcanism. Apparently, the Moon became chemically very heterogeneous at an early stage in its history and different cumulate sources are responsible for the diverse mare basalt types.Evidence that Kalahari 008 and 009 may be paired includes the similar fayalite content of their olivine, the identical initial Hf isotope composition, the exceptionally low exposure ages of both rocks and the fact that they were found close to each other. Since cryptomaria are covered by highland ejecta, it is possible that these rocks are from the boundary area, where basalt deposits are covered by highland ejecta. The concentrations of cosmogenic radionuclides and trapped noble gases are unusually low in both rocks, although Kalahari 008 contains slightly higher concentrations. A likely reason for this difference is that Kalahari 008 is a polymict breccia containing a briefly exposed regolith, while Kalahari 009 is a monomict brecciated rock that may never have been at the surface of the Moon.Altogether, the compositions of Kalahari 008 and 009 permit new insight into early lunar evolution, as both meteorites sample lunar reservoirs hitherto unsampled by spacecraft missions. The very low Th and REE content of Kalahari 009 as well as the depletion in Sm and the lack of a KREEP-like signature in Kalahari 008 point to a possible source far from the influence of the Procellarum-KREEP Terrane, possibly the lunar farside.     

Mechanical characteristics of a lunar regolith simulant at low confining pressure

Manned lunar exploration has recently attracted renewed interest. This includes the NASA Constellation program to return humans to the Moon by 2020, the ESA Aurora program which may use the Moon as a way station to prepare for major interplanetary exploration by 2025, and the PRC program to send a human to the Moon by 2030 and build a temporary manned lunar base by 2040. One of the problems demanding a solution is the stresses on the mechanical characteristics of the lunar regolith under the microgravity environment. The gravity on the Moon is about 1/6 that on Earth. The regolith is subject to very low confining stresses under a microgravity environment and the mechanical properties can change correspondingly. Because of the limited amount of lunar regolith brought back to Earth by the Apollo missions, a lunar regolith simulant was developed using silicon carbide to investigate the properties of the lunar regolith. Based on triaxial tests, this study analyzed the mechanical properties of the lunar regolith simulant at low stresses including the shear strength, peak strength and dilatation angle. The research results provide useful information on lunar regolith characteristics for astronauts returning to the Moon and for building a temporary manned lunar base.     

The halogens in Luna 16 and Luna 20 soils

Cl and P₂U₅ do not appear to exhibit the same correlation in soils from the Luna 20 and possibly the Luna 16 sites as they do in samples from the Apollo 11–15 sites. Nevertheless, the coherence between labile Cl and other KREEP-related elements is maintained.