Outokumpu revisited: New mineral deposit model for the mantle peridotite-associated Cu–Co–Zn–Ni–Ag–Au sulphide deposits

The metaturbidites of the Palaeoproterozoic Jormua–Outokumpu thrust belt in eastern Finland enclose m- to km-scale ultramafic massifs that are distributed over an area of more than 5000 km². These bodies, which almost entirely consist of highly depleted mantle peridotites (now metaserpentinites and metaperidotites), are intimately associated with massive to semimassive, polymetallic Cu–Co–Zn–Ni–Ag–Au sulphide deposits that sustained mining in the region between 1913 and 1988. Currently, one deposit (Kylylahti) is proceeding into a definitive feasibility study emphasising the renewed economic interest for Outokumpu-type deposits.The origin of these Outokumpu-type Cu–Co–Zn–Ni–Ag–Au deposits is now re-interpreted to be polygenetic. First, their formation requires deposition of a Cu-rich proto-ore within peridotitic sea floor at  1950 Ma. Close modern analogues to the proto-ore setting include, for example, the Logatchev and Rainbow fields at the Mid-Atlantic Ridge, where venting of high-T–low-pH hydrothermal fluid resulted in accumulations of Cu–Zn–Co–Ag–Au sulphides on serpentinised ultramafic seafloor. Second, the Ni-rich composition of Outokumpu sulphide ores calls for a separate source for nickel: Some 40 Ma after the deposition of the Cu-rich proto-ore – concomitant with the obduction of the ultramafic massifs – disseminated Ni sulphides formed through chemical interaction between obducting peridotite massifs and adjacent black schists. This process was related to listwaenite–birbirite type carbonate–silica alteration at margins of the ultramafic massifs. Due to this alteration, silicate nickel was released from the primary Fe–Mg silicates and redeposited as Ni sulphides in the alteration fringes of the massifs.We propose that syntectonic mixing of these two “end-member” sulphides, i.e., the primary Cu-rich proto-ore and the secondary Ni-sulphide disseminations, resulted in the uncommon metal combination of the Outokumpu-type sulphides. Late tectonic solid-state re-mobilisation, related to the duplexing of the ore by isoclinal folding, upgraded the sulphides into economic deposits.     

Brine pool deposition for the Zn–Pb–Cu massive sulphide deposits of the Bathurst mining camp, New Brunswick, Canada. I. Comparisons with the Iberian pyrite belt

The Ordovician Zn–Pb–Cu massive sulphide ore deposits of the Bathurst mining camp share many features with those of the Devonian/Carboniferous Iberian pyrite belt, particularly the tendency to large size (tonnage and metal content); shape, as far as can be determined after allowing for deformation; metal content, particularly Fe/Cu, Pb/Zn and Sn; mineral assemblages (pyrite + arsenopyrite ± pyrrhotite and lack or rarity of sulphates); sulphide textures (particularly framboidal pyrite); lack of chimney structures and rubble mounds; irregular metal or mineral zoning; and the low degree of zone refining compared to Hokuroku ores. The major differences between the provinces are the lack of vent complexes and the presence of Sn–Cu ores in the Iberian pyrite belt. There are also similarities in the geological setting of the two camps: both lie within continental terranes undergoing arc-continent and continent–continent collision, and in each case massive sulphide mineralisation followed ophiolite obduction; the ore deposits are associated with bimodal volcanic rocks derived from MORB and continental crust and marine shales; and mineralisation was locally accompanied or followed by deposition of iron formations.Fluid inclusion data from veins in stockworks from at least six of the Iberian massive sulphide deposits point to sulphide deposition having taken place in basins containing mostly spent saline, ore-forming fluids (brine pools), and it is suggested that most of the major features of the Bathurst deposits can be explained by similar processes. The proposed model is largely independent of ocean sulphate and O₂ content, whereas low values of each are requisites for the current, spreading-plume model of sulphide deposition in the Bathurst camp.     

Brine-pool deposition for the Zn–Pb–Cu massive sulphide deposits of the Bathurst mining camp, New Brunswick, Canada. II. Ocean anoxia during mineralisation

Current models of massive sulphide ore genesis in the Bathurst mining camp, New Brunswick, involve settling of sulphide particles from a stagnating, low-salinity hydrothermal plume spreading laterally in an anoxic ocean layer with minimal sulphate content. There is fragmentary evidence of ocean anoxia in the form of local fine lamination in the shales that host some of the deposits but the total organic carbon, S, Fe, U/Th, Ni/Co, V/Ni and V/Cr relationships indicate deposition under oxic or dysoxic conditions. Vanadium and Mn values range from oxic to anoxic and sulphate-reducing to non-sulphate reducing but Mn may be anomalously low due to derivation by erosion of acidic volcanic rocks. The somewhat equivocal physical and chemical data, combined with the likely disturbing effects of penecontemporaneous volcanism, considerably weaken the case for an anoxic bottom layer in a static ocean. The presence of barite with ambient seawater ³⁴S values in Brunswick no. 12 ore, and the abundance of sulphate in modern euxinic basin waters, make a sulphate-free layer unlikely, even if anoxic. Sulphate-bearing, low-salinity fluids mixing with seawater would lead to growth of barite-bearing chimneys and baritic rubble mounds, which are not observed. A model involving brine-pool deposition better explains the major features of the Bathurst ores.     

Geological features and origin of the Huize carbonate-hosted Zn–Pb–(Ag) District, Yunnan, South China

The Huize Zn–Pb–(Ag) district, in the Sichuan–Yunnan–Guizhou Zn–Pb–(Ag) metallogenic region, contains significant high-grade, Zn–Pb–(Ag) deposits. The total metal reserve of Zn and Pb exceeds 5 Mt. The district has the following geological characteristics: (1) high ore grade (Zn + Pb ≥ 25 wt.%); (2) enrichment in Ag and a range of other trace elements (Ge, In, Ga, Cd, and Tl), with galena, sphalerite, and pyrite being the major carriers of Ag, Ge, Cd and Tl; (3) ore distribution controlled by both structural and lithological features; (4) simple and limited wall-rock alteration; (5) mineral zonation within the orebodies; and (6) the presence of evaporite layers in the ore-hosting wall rocks of the Early Carboniferous Baizuo Formation and the underlying basement.Fluid-inclusion and isotope geochemical data indicate that the ore fluid has homogenisation temperatures of 165–220 °C, and salinities of 6.6–12 wt.% NaCl equiv., and that the ore-forming fluids and metals were predominantly derived from the Kunyang Group basement rocks and the evaporite-bearing rocks of the cover strata. Ores were deposited along favourable, specific ore-controlling structures. The new laboratory and field studies indicate that the Huize Zn–Pb–(Ag) district is not a carbonate-replacement deposit containing massive sulphides, but rather the deposits can be designated as deformed, carbonate-hosted, MVT-type deposits. Detailed study of the deposits has provided new clues to the localisation of concealed orebodies in the Huize Zn–Pb–(Ag) district and of the potential for similar carbonate-hosted sulphide deposits elsewhere in NE Yunnan Province, as well as the Sichuan–Yunnan–Guizhou Zn–Pb–(Ag) metallogenic region.     

Evolution of mineralizing fluids in the Zn–Pb–Cu(–Ag ± Au) skarn and epithermal deposits of the world-class San Martín district, Zacatecas, Mexico

Mineralizing fluids at the San Martín skarn show an evolution characterized by prograde and retrograde associations. The prograde mineral associations consist of (1) a massive garnet zone, (2) a tremolite ± garnet zone, and (3) a late association of quartz, sphalerite, calcite and fluorite lining the vugs in the garnet zone. The fluids of the prograde associations exhibit decreasing temperatures of homogenization (Th) and variable salinities. The fluids of the massive garnet zone have salinities of 36 wt.% NaCl equiv. and Th of 645 to 570 °C, corresponding to pressures of 1055 bar. At the tremolite ± garnet zone, Th range from 438 to 354 °C. In the late association at the endoskarn, the following evolution can be drawn: (a) salinities of 50 to 42 wt.% NaCl equiv., and Th of 455 to 346 °C in quartz, (b) salinities of 46 wt.% NaCl equiv., and Th of 415 to 410 °C in sphalerite, (c) salinities of 50 to 37 wt.% NaCl equiv., and Th of 479 to 310 °C in calcite, (d) salinities of 33 to 28 wt.% NaCl equiv. and of 24 to 22 wt.% KCl in fluorite, and (e) two types of fluids with salinities of 2 and 39 wt.% NaCl equiv. and Th 344 and 300 °C, respectively, in later saccharoidal quartz segregations. The retrograde mineral associations comprise pervasive propylitic alteration to carbonization, and mantos with sulfides. Fluids in epidote have salinities of 7.6 wt.% NaCl equiv. and Th of 287 to 252 °C, and in calcite have salinities of 9.2 to 1 wt.% NaCl equiv. and Th of 188 to 112 °C. Fluids in the sulfide assemblages in the mantos have salinities of 8 to 3 wt.% NaCl equiv. and Th 300 °C, with corresponding pressures of 94 bar. Fluids in late epithermal veins close to the intrusive body have salinities of 10 to 5 wt.% NaCl equiv. and Th of 275 to 200 °C, and distal veins show salinities of 2 to 1 wt.% NaCl equiv. and Th of 160 °C.     

Geology and geochemistry of D–O–C isotope systematics of the Qolqoleh gold deposit, Northwestern Iran: Implications for ore genesis

The Qolqoleh gold deposit is located in northwestern part of the Sanandaj–Sirjan metamorphic belt, northwestern Iran. Igneous and sedimentary units exposed in the area have undergone greenschist metamorphism. The area was affected by a NE–SW trending shear zone and subsequent deformation. Two different types of mineralization are distinguished in the Qolqoleh gold deposit based on geological–structural conditions indicated by microtextural analysis: ductile and then brittle. Ore-forming processes are divided into three stages: Early (I), Middle (II) and Late (III), which include quartz–pyrite (I), sulfides and gold (II) and carbonate veinlets (III), respectively. The stage I fluids are characterized by δ¹⁸O = 15.5‰ at 440 ºC, and are thought to be deep-sourced metamorphic waters; the stage III fluids, with δ¹⁸O = 1.6‰, are shallow-sourced meteoric waters; whereas, the stage II fluids, with δ¹⁸O = 13.1‰, are a mixture of deep-sourced metamorphic and shallow-sourced meteoric fluids. Based on comparisons of the D–O–C isotopic systematics, the ore-forming fluids with characteristic high δ¹⁸O and δ¹³C and low δD originated from metamorphic devolatilization of Cretaceous volcano-sedimentary (felsic to mafic metavolcanic rocks–shale–carbonate–carbonaceous chert) sequences, locally rich in organic matter. During late Cretaceous continental collision of the Afro-Arabian continent and the Iranian microcontinent, a crustal slab consisting of felsic to mafic metavolcanic rocks, carbonate, shale and carbonaceous chert was underthrust northwards beneath the central Iranian microcontinent along the Zagros fault. During further contraction, deformation was localized in reverse oblique-slip structures with vergence toward south; shear zones generally follow contacts between more competent and less competent rock units. Metamorphic devolatilization of this underthrust slab is the source of the ore-forming fluids that generated the Au ore belt, which includes the Qolqoleh gold deposit.     

Age and Tectonic Setting of Mesothermal Magmatic Hydrothermal Vein‐Type Pb–Zn–(Ag) Mineralization in the Xiaohongshilazi Deposit,Central Jilin Province,Northeast China

The Xiaohongshilazi deposit located in central Jilin Province, Northeast China, is a newly discovered and medium‐scale Pb–Zn–(Ag) deposit with ore reserves of 34,968 t Pb, 100,150 t Zn, and 158 t Ag. Two‐stage mineralization has been identified in this deposit. Stratiform volcanic‐associated massive sulfide (VMS) Pb–Zn mineralization interbedding with the marine volcanic rocks of the Late Carboniferous–Early Permian Daheshen Formation was controlled by the premineralization E–W‐trending faults. Vein‐type Pb–Zn–(Ag) mineralization occurs within or parallel to the granodiorite and diorite porphyries controlled by the major‐mineralization N–S‐trending faults that cut the stratiform mineralization and volcanic rocks. To constrain the age of vein‐type Pb–Zn–(Ag) mineralization and determine the relationship between mineralization and magmatism, we conducted LA–ICP–MS U–Pb dating on zircon from the ore‐bearing granodiorite and diorite porphyries and Rb–Sr dating on metal sulfide. Granodiorite and diorite porphyries yield zircon U–Pb weighted‐mean ²⁰⁶Pb/²³⁸U ages of 203.6 ± 1.8 Ma (Mean Standard Weighted Deviation [MSWD] = 1.8) and 225.6 ± 5.1 Ma (MSWD = 2.3), respectively. Sulfides from four vein‐type ore samples yield a Rb–Sr isochron age of 195 ± 17 Ma (MSWD = 4.0). These results indicate a temporal relationship between the granodiorite porphyry and vein‐type Pb–Zn–(Ag) mineralization. The granodiorite associated with vein‐type mineralization has high SiO₂ (68.99–70.49 wt.%) and Na₂O (3.9–4.2 wt.%; Na₂O/K₂O = 1.07–1.10) concentrations, and A/CNK values of 0.95–1.04; consequently, the intrusion is classified as a high‐K, calc‐alkaline, metaluminous I‐type granite. The granodiorite porphyry is enriched in large‐ion lithophile elements (e.g. Rb, Th, U, and K) and light REE and is depleted in high‐field‐strength elements (e.g. Nb, Ta, P, and Ti) and heavy REE, indicating that it represents a subduction‐related rock that formed at an active continental margin. Furthermore, the granodiorite porphyry has Mg# values of 31–34, indicating a lower crustal source. Based on petrological and geochemical features, we infer that the ore‐bearing granodiorite porphyry was derived from the partial melting of the lower crust. In summary, mineralization characteristics, cross‐cutting relationships, geochronological data, and regional tectonic evolution indicate that the region was the site of VMS Pb–Zn mineralization that produced stratiform orebodies within the Late Carboniferous–Early Permian marine volcanic rocks of the Daheshen Formation, followed by mesothermal magmatic hydrothermal vein‐type Pb–Zn–(Ag) mineralization associated with granodiorite porphyry induced by the initial subduction of the Paleo‐Pacific Plate beneath the Eurasia Plate during the Late Triassic–Early Jurassic.     

The Aguablanca Cu–Ni ore deposit (Extremadura, Spain), a case of synorogenic orthomagmatic mineralization: age and isotope composition of magmas (Sr, Nd) and ore (S)

The Aguablanca Cu–Ni orthomagmatic ore deposit is hosted by mafic and ultramafic rocks of the Aguablanca stock, which is part of the larger, high-K calc-alkaline Santa Olalla plutonic complex. This intrusive complex, ca. 338 Ma in age, is located in the Ossa-Morena Zone (OMZ) of the Iberian Variscan Belt. Mineralization consists mainly of pyrrhotite, pentlandite and chalcopyrite resulting from the crystallization of an immiscible sulphide-rich liquid. Isotope work on the host igneous rocks (Sr, Nd) and the ore (S) suggests that contamination with an upper-crustal component took place at some depth before final emplacement of the plutons (Nd₃₃₈=−6 to −7.5; Sr₍₃₃₈₎=0.7082 to 0.7100; δ³⁴S_(sulphides) near +7.4‰). Assimilation–fractional crystallization (AFC) processes are invoked to explain early cumulates and immiscible sulphide-magma formation. Intrusion took place at the beginning of the type-A oblique subduction of the South Portuguese Zone under the Ossa-Morena Zone and was probably driven by transpressive structures (strike-slip faults). The mineralization is thus synorogenic.Aguablanca is probably the first case referred to in the literature of a magmatic Cu–Ni ore deposit hosted by calc-alkaline igneous rocks.     

Copper mineralization around the Ahar batholith, north of Ahar (NW Iran): Evidence for fluid evolution and the origin of the skarn ore deposit

This investigation presents and interprets fluid inclusion data from different lithological units of the Cu skarn deposits at Mazraeh, north of Ahar, Azarbaijan, NW Iran. The results provide an assessment of the P–T conditions and mineral–fluid evolution and suggest new exploration parameters. Five types of inclusions are recognized from quartz and garnet. The temperature of homogenization of Type I inclusions with daughter minerals halite and sylvite ranges from 312° to 470 °C with total salinity of 52 to 63 wt.% NaCl equiv.; Type II and III inclusions with halite have homogenization temperatures of 230° to 520 °C and salinity of 31 to 50 wt.% NaCl equiv. The salinity of Types IV and V biphase (liquid + vapor) inclusions, based on their final ice melting temperature, varies between 10.2 to 20.8 wt.% NaCl equiv. T_h vs. salinity plots of inclusions show that the salinity of the fluids correlates positively with temperature. The inclusions formed at low pressure. Changes in the temperature and salinity of the fluids can be reconstructed from the inclusions. Highly saline, high-temperature fluids were most abundant during the main chalcopyrite ore-forming phase in the skarn and mineralized quartz veins. Low-salinity aqueous fluids were abundant in barren veins, in which there is no evidence for early hot high-salinity brine, and might have resulted from late-stage dilution and mixing of hydrothermal fluids with meteoric water. Based on petrographic features and fluid-inclusion data, early-stage magnetite deposition is related to boiling of fluid at temperatures of about 500 °C. At a later stage, boiling at temperatures of around 320° to 400 °C favored the deposition of sulfides and Fe mobility was decreased at these lower temperatures. The following inclusion characteristics may be used as exploration parameters in the Mazraeh area. (i) Presence of high-temperature, salt-bearing inclusions, with T_h between 300 and 500 °C; (ii) High-salinity fluid inclusions; and (iii) Inclusions showing evidence of boiling of the fluid. In addition, the presence of magnetite is an important exploration parameter.     

南天山萨瓦亚尔顿金矿床稀土微量元素特征及其成因意义

萨瓦亚尔顿金矿位于新疆乌恰县的南天山构造带中,是我国20世纪90年代发现的第一例“穆龙套型”金矿.矿床形成于印支期,矿化与石英脉密切相关,显示了与穆龙套金矿的相似性.成矿流体演化经历了早期高温无矿化石英阶段,中期中低温矿化石英阶段,晚期低温碳酸盐脉阶段.早期无矿石英的稀土及微量元素含量均低于矿化石英.矿化石英包体中流体的稀土元素配分模式显示较一致的轻稀土富集和Eu正异常,指示流体中较高的钙离子或相对还原环境;流体中Pb含量较高,而蚀变强烈的围岩则显示出明显的Ca和Pb流失,这表明成矿流体可能部分来源于与围岩发生交代作用的蚀变流体,矿质沉淀可能与流体混合作用相关.早期石英包体中流体的稀土和微量元素含量较低则指示早期阶段可能未发生流体混合.萨瓦亚尔顿Ⅳ号矿脉为最大矿带,其含矿石英包体中流体微量元素一般高于其它矿脉石英,可能显示较强的流体混合及成矿作用.Ⅱ号矿脉在流体稀土及微量元素含量上显示与Ⅳ脉更为相似.萨瓦亚尔顿金矿稀土微量元素研究表明围岩组分可能为成矿流体主要来源之一,而流体混合则为成矿重要机制,这与前期流体包裹体及同位素研究结论一致,也符合造山型金矿的一般特征.     

Sulfur isotopic compositions of the Huize super-large Pb–Zn deposit, Yunnan Province, China: Implications for the source of sulfur in the ore-forming fluids

The Huize Pb–Zn deposit of Yunnan Province, China, is located in the center of the Sichuan–Yunnan–Guizhou Pb–Zn–Ag district. Four primary orebodies (orebody No. 1, No. 6, No. 8 and No. 10), with Pb + Zn reserves from 0.5 Mt to 1 Mt, have been found at depth in this deposit. This paper provides new data on the sulfur isotopic compositions of the four orebodies. The data show that the principal sulfide minerals (galena, sphalerite and pyrite) in the four orebodies are enriched in heavy sulfur, the δ³⁴S values between 10.9‰ and 17.7‰ and where δ³⁴S_pyrite > δ³⁴S_sphalerite > δ³⁴S_galena. The δ³⁴S values of sulfide are close to that of the sulfates from the carbonate strata within the region. The similarity in sulfur isotope composition between sulfides and sulfates indicates the sulfur in the ore-forming fluids was likely derived by thermochemical sulfate reduction of sulfates contained within carbonate units.     

Petrology and geochemistry of Tertiary volcanic rocks from the İkizce (Ordu) area, NE Turkey: Implications for the evolution of the eastern Pontide paleo-magmatic arc

Tertiary volcanism in the İkizce region at the western edge of the eastern Pontides paleo-magmatic arc is represented by basaltic and andesitic rocks associated with sediments deposited in a shallow basin environment. The basaltic rocks contain plagioclase (An_58–80), olivine (Fo_82–84), clinopyroxene (Wo_44–48En_35–42Fs_7–17), hornblende (Mg# = 0.68–0.76) phenocrysts, and magnetite microcrysts, whereas the andesitic rocks include plagioclase (An_25–61), clinopyroxene (Wo_46–49En_38–43Fs_11–13), hornblende (Mg# = 0.48–0.81), biotite (Mg# = 0.48–0.60) phenocrysts, titanomagnetite, apatite, and zircon microcrysts.Geochemical data indicate magmatic evolution from tholeiitic-alkaline transitional to calc-alkaline characteristics with medium-K contents. The geochemical variation in the rocks can be explained by fractionation of common mineral phases such as clinopyroxene, olivine, hornblende, plagioclase, magnetite, and apatite. The trace elements’ distributions of the volcanic rocks show similarities to those of E-Type MORB, have a shape that is typical of rocks from subduction-related tectonic setting with enrichment in LILE and to a lesser extent in LREE, but depletion in HFSE. The rocks evolved from a parental magma derived from an enriched source formed by subduction induced metasomatism of basaltic rocks, the latter formed through clinopyroxene ± olivine controlled fractionation in a high level magma chamber. The andesitic rocks developed through hornblende ± plagioclase controlled fractionation in shallow level magma chamber(s).     

Modeling of fluid pressure evolution related to sediment loading and thrust faulting in the Lanping basin: Implications for the formation of the Jinding Zn–Pb deposit, Yunnan, China

The Jinding Zn–Pb deposit occurs in Cretaceous and Paleocene siliciclastic rocks (mainly sandstones) in the Meso-Cenozoic Lanping basin, western Yunnan, China. With a reserve of approximately 200 Mt of ore containing 6.1% Zn and 1.3% Pb, Jinding is the largest sandstone-hosted Zn–Pb deposit in the world. Most previous studies assumed that the mineralizing fluids were derived from within the basin (including meteoric recharge), and the fluid flow was driven by topographic relief under a hydrostatic regime. In contrast, we propose that the mineralizing system was strongly overpressured based on observations of hydraulic fractures and fluid inclusion data. Numerical modeling results indicate that the overpressures could not have been produced by normal sediment compaction. Thrust faulting and input of mantle-derived fluids are likely responsible for the building-up of the high overpressures. The special hydrodynamic regime and potential contribution of mantle-derived fluids to the mineralizing system distinguish Jinding from other known sedimentary basin-related Pb–Zn deposits.     

Geology and Mineral Chemistry of Gold Mineralization in Mirge‐Naqshineh Occurrence (Saqez,NW Iran): Implications for Transportation and Precipitation of Gold

The Mirge-Naqshineh gold district is situated at northwest of Iran with a NW-trending brittleductile shear zone. It is hosted by Precambrian meta-sedimentary and meta-volcanic units traversed by mineralized quartz veins. In terms of cross-cutting relationships and sulfide content three types of quartz veins are identified in the region. Among those, parallel to bedding quartz vein(type Ⅰ) is the main host for gold mineralization. Gold is found in three different forms: 1) submicrometer-size inclusions of gold in arsenian pyrite, 2) as electrum and 3) in the crystal lattice of sulfides(pyrite, galena and chalcopyrite). Six types of pyrite(Py1-Py6) were identified in this ore reserve. Py3 coexists with arsenopyrite and contains the greatest As-Au concentrations. There is a negative correlation between the As and S contents in Py2 and Py3, implying the substitution of sulfur by arsenic. Pyrites and mineralized quartz veins were formed via metamorphic-hydrothermal fluid and reflect the gold-transportation as Au(HS)_2~- under reducing and acidic conditions. The gold precipitation mainly controlled by crystallization of arsenian pyrite during fluid/rock interactions and variation of fO_2. The volcanic host rock has played an important role in gold concentration, as Py3 in this rock contains inclusion of gold particles, but gold is within the lattice of pyrite in phyllite or other units.     

Petrogenesis of Cretaceous adakitic and shoshonitic igneous rocks in the Luzong area, Anhui Province (eastern China): Implications for geodynamics and Cu–Au mineralization

Both adakitic and shoshonitic igneous rocks in the Luzong area, Anhui Province, eastern China are associated with Cretaceous Cu–Au mineralization. The Shaxi quartz diorite porphyrites exhibit adakite-like geochemical features, such as light rare earth element (LREE) enrichment, heavy REE (HREE) depletion, high Al₂O₃, MgO, Sr, Sr / Y and La / Yb values, and low Y and Yb contents. They have low ε_Nd(t) values (− 3.46 to − 6.28) and high (⁸⁷Sr / ⁸⁶Sr)_i ratios (0.7051–0.7057). Sensitive High-Resolution Ion Microprobe (SHRIMP) zircon analyses indicate a crystallization age of 136 ± 3 Ma for the adakitic rocks. Most volcanic rocks and the majority of monzonites and syenites in the Luzong area are K-rich (or shoshonitic) and were also produced during the Cretaceous (140–125 Ma). They are enriched in LREE and large-ion lithophile elements, and depleted in Ti, and Nb and Ba and exhibit relatively lower ε_Nd(t) values ranging from − 4.65 to − 7.03 and relatively higher (⁸⁷Sr / ⁸⁶Sr)_i ratios varying between 0.7057 and 0.7062. The shoshonitic and adakitic rocks in the Luzong area have similar Pb isotopic compositions (²⁰⁶Pb / ²⁰⁴Pb = 17.90–18.83, ²⁰⁷Pb / ²⁰⁴Pb = 15.45–15.62 and ²⁰⁸Pb / ²⁰⁴Pb = 38.07–38.80). Geological data from the Luzong area suggest that the Cretaceous igneous rocks are distributed along NE fault zones (e.g., Tanlu and Yangtze River fault zones) in eastern China and were likely formed in an extensional setting within the Yangtze Block. The Shaxi adakitic rocks were probably derived by the partial melting of delaminated lower crust at pressures equivalent to crustal thickness of > 50 km (i.e., 1.5 GPa), possibly leaving rutile-bearing eclogitic residue. The shoshonitic magmas, in contrast, originated mainly from an enriched mantle metasomatized by subducted oceanic sediments. They underwent early high-pressure (> 1.5 GPa) fractional crystallization at the boundary between thickened (> 50 km) lower crust and lithospheric mantle and late low-pressure (< 1.5 GPa) fractional crystallization in the shallow (< 50 km) crust. The adakitic and shoshonitic rocks appear to be linked to an intra-continental extensional setting where partial melting of enriched mantle and delaminated lower crust was probably controlled by lithospheric thinning and upwelling of hot asthenosphere along NE fault zones (e.g., Tanlu and Yangtze River fault zones) in eastern China. Both the shoshonitic and adakitic magmas were fertile with respect to Cu–Au mineralization.     

Geochronology, Geochemistry and Sr-Nd-Pb-Hf Isotopes of No. I Complex from the Shitoukengde Ni–Cu Sulfide Deposit in the Eastern Kunlun Orogen, Western China: Implications for the Magmatic Source, Geodynamic Setting and Genesis

The Shitoukengde Ni-Cu deposit, located in the Eastern Kunlun Orogen, comprises three mafic–ultramafic complexes, with the No. I complex hosting six Ni-Cu orebodies found recently. The deposit is hosted in the small ultramafic bodies intruding Proterozoic metamorphic rocks. Complexes at Shitoukengde contain all kinds of mafic-ultramafic rocks, and olivine websterite and pyroxene peridotite are the most important Ni-Cu-hosted rocks. Zircon U-Pb dating suggests that the Shitoukengde Ni-Cu deposit formed in late Silurian(426–422 Ma), and their zircons have εHf(t) values of-9.4 to 5.9 with the older T_(DM1) ages(0.80–1.42 Ga). Mafic-ultramafic rocks from the No. I complex show the similar rare earth and trace element patterns, which are enriched in light rare earth elements and large ion lithophile elements(e.g., K, Rb, Th) and depleted in heavy rare earth elements and high field strength elements(e.g., Ta, Nb, Zr, Ti). Sulfides from the deposit have the slightly higher δ~(34)S values of 1.9–4.3‰ than the mantle(0 ± 2‰). The major and trace element characteristics, and Sr-Nd-Pb and Hf, S isotopes indicate that their parental magmas originated from a metasomatised, asthenospheric mantle source which had previously been modified by subduction-related fluids, and experienced significant crustal contamination both in the magma chamber and during ascent triggering S oversaturation by addition of S and Si, that resulted in the deposition and enrichment of sulfides. Combined with the tectonic evolution, we suggest that the Shitoukengde Ni-Cu deposit formed in the post-collisional, extensional regime related to the subducted oceanic slab break-off after the Wanbaogou oceanic basalt plateau collaged northward to the Qaidam Block in late Silurian.     

Zircon U–Pb geochronological and geochemical constraints on the petrogenesis of the Taishan sanukitoids (Shandong): Implications for Neoarchean subduction in the Eastern Block, North China Craton

Elemental, Sr–Nd–Pb isotopic and geochronological data are presented for the Taishan high-mg dioritic rocks (western Shandong) from the Eastern Block of the North China Craton in order to better understand the Archean tectonic evolution and crustal growth of the Craton. The rocks gave the zircon U–Pb age of 2536–2540 Ma. They show low SiO₂ and Al₂O₃ contents, high MgO, mg-number, Cr, Ni, Y, Yb, Sr and Ba, enriched LILEs and LREEs, depleted HFSEs and HREEs with (Nb/La)_N of 0.07–0.12. They exhibit _Nd(t) values of 1.53–3.30, (²⁰⁶Pb/²⁰⁴Pb)_i of 11.20–15.30, (²⁰⁷Pb/²⁰⁴Pb)_i of 14.14–14.83 and (²⁰⁸Pb/²⁰⁴Pb)_I of 31.10–33.93. Such geochemical features with an affinity to both a mantle- and crust-like source for the Taishan dioritic rocks are similar to those of the typical Archean sanukitoids, suggesting an origination from a sub-arc mantle wedge variably metasomatized by the slab-derived dehydration fluids and melts before 50–100 Ma of the emplacement of the Taishan sanukitoid plutons. It is proposed that the Taishan sanukitoids resulted from the sudden change of the downgoing slab from a flat subduction to subsequently steeper subduction in an active continental margin regime during Neoarchean time.     

U–Th–Pb–REE systematics of organic-rich shales from the ca. 2.15 Ga Sengoma Argillite Formation, Botswana: Evidence for oxidative continental weathering during the Great Oxidation Event

The redox-sensitive geochemical behavior of uranium permits the use of Th/U ratios as a geochemical proxy for the oxidation state of the atmosphere during deposition. Due to the effects of post-depositional uranium mobility on Th/U ratios during events involving oxygenated fluids, direct measurements of Th/U ratios are often misleading even for drill core samples. Because both of these elements radioactively decay and produce lead isotopes, the Pb isotope composition may reflect the depositional Th/U ratio, although the Th/U ratios induced by changes shortly after deposition may not be distinguished from the true depositional Th/U ratios. In order to effectively evaluate the time-integrated Th/U ratio (κ_a), values for the initial depositional Pb isotope composition must be determined or accepted from the models for the whole Earth.While the timing for the rise of atmospheric oxygen is reasonably well constrained now, its effect on continental weathering and ocean redox state remains poorly constrained and debated. The ca. 2.15 Ga Sengoma Argillite Formation of Botswana contains organic-rich shales deposited during the Great Oxidation Event. The slope of the ²⁰⁷Pb/²⁰⁴Pb–²⁰⁶Pb/²⁰⁴Pb array of shales from the Sengoma Argillite Formation corresponds to a Pb–Pb age that is within analytical error of the depositional age and is, therefore, inferred to be the time by which the time-integrated thorogenic and uranogenic lead growth started. The time-integrated lead growth corresponds to an average κ_a of 2.63 (± 0.62, 1σ) for the organic-rich shales of the Sengoma Argillite Formation. This is lower than Th/U ratios measured in Archean shale suites or estimated for the Archean–Proterozoic average upper continental crust [Taylor, S.R. and McLennan, S.M., 1985. The Continental Crust: Its Composition and Evolution. Blackwell, Oxford, 312 pp.], which indicates that these samples were enriched in uranium with respect to thorium (and perhaps lead) at the time of deposition. In the modern ocean, sediments are enriched in uranium under reducing conditions by reduction of the water-soluble uranyl ion, which is delivered to the ocean by oxidative weathering of continental crust. To evaluate the potential mobility of Th, U, and Pb during post-depositional processes, the concentrations of the rare earth elements (REE) were also determined. Interelement ratios of the largely immobile REE (in this study, La/Nd and Gd/Er) can be used as a proxy for the Th/U ratio, as the geochemical behavior of the lanthanide and actinide elements is similar under a variety of conditions. Furthermore, close similarity in the chondrite-normalized REE patterns and small range in La/Nd and Gd/Er ratios in studied samples indicate that variations in κ_a values are not likely to have been controlled by mixing of one or more REE-, Th-, and U-rich heavy minerals from the multiple detrital sources. Our study of shales from the ca. 2.15 Ga Sengoma Argillite Formation indicates that decoupling of U from Th, most likely related to the oxidative continental weathering, began by 2.15 Ga, at the latest.     

Review of geology, alteration and origin of iron oxide–apatite deposits in the Cretaceous Ningwu basin, Lower Yangtze River Valley, eastern China: Implications for ore genesis and geodynamic setting

In the Cretaceous Ningwu volcano-sedimentary basin in the Yangtze River Valley metallogenic belt, eastern China, there are three areas with a dense distribution of magnetite or hematite deposits: the Meishan deposit in the north; Washan, Nanshan and Taocun deposits in the center; and the Zhongjiu and Gushan deposits in the south. The mineralization in the Ningwu basin is associated mainly with subvolcanic intrusions, consisting of gabbro–diorite porphyry and/or gabbro–diorite. Alteration zoning of these deposits is pronounced, and includes: (1) an upper light colored zone of argillic, kaolinite, silica, carbonate and pyritic alteration (2) a middle dark colored zone of diopside, fluorapatite–magnetite, phlogopite, and garnet with fluorapatite–magnetite; (3) a lower light colored zone of extensive albitic alteration. However, at the Gushan iron deposit, the lower light colored zone and the middle dark colored zone are absent, whereas the principal alteration is represented by silicification, kaolinization, and carbonatization.The iron oxide–apatite deposits in the Ningwu basin are typically magmatic–metasomatic origin and are similar to the Kiruna-type deposits in Scandinavia, particularly with respect to mineral assemblages, fabric and structure of the iron ores, occurrence of the orebodies and wall rock alteration. The iron oxide–apatite deposits of the Ningwu basin contain magnetite and/or hematite, with diopside or actinolite and apatite gangue. They were formed in a rift or extensional environment and the mineralization is associated with alkaline magmatism. The time interval between magmatism and related mineralization is very short.