Geochemistry of basaltic lavas from the southern Lau Basin: input of compositionally variable subduction components

We present new major element, trace element, and Sr–Nd–Pb isotope data for 18 basaltic lavas and six glasses collected in situ from the Eastern Lau Spreading Centre (ELSC) and the Valu Fa Ridge (VFR). All lava samples are aphanitic and contain rare plagioclase and clinopyroxene microlites and microphenocrysts. The rocks are sub-alkaline and range from basalt and basaltic andesite to more differentiated andesite. In terms of trace element compositions, the samples are transitional between typical normal mid-ocean ridge basalt (MORB) and island arc basalt. Samples from the VFR have higher large ion lithophile element/high field strength element ratios (e.g. Ba/Nb) than the ELSC samples. VFR and ELSC Sr–Nd isotopic compositions plot between Indian MORB and Tonga arc lavas, but VFR samples have higher ⁸⁷Sr/⁸⁶Sr for a given ¹⁴³Nd/¹⁴⁴Nd ratio than ELSC analogues. The Pb isotopic composition of ELSC lavas is more Indian MORB-like, whereas that of VFR lavas is more Pacific MORB-like. Our new data, combined with literature data for the Central Lau Spreading Centre, indicate that the mantle beneath the ELSC and VFR spreading centres was originally of Pacific type in composition, but was displaced by Indian-type mantle as rifting propagated to the south. The mantle beneath the spreading centres also was variably affected by subduction-induced metasomatism, mainly by fluids released from the altered, subducting oceanic crust; the influence of these components is best seen in VFR lavas. To a first approximation, the effects of underflow on the composition and degree of partial melting of the mantle source of Lau spreading centre lavas inversely correlate with distance of the spreading centres from the Tonga arc. Superimposed on this general process, however, are the effects of the local geographic contrasts in the composition of subduction components. The latter have been transferred mainly by dehydration-generated fluids into the mantle beneath the Tonga supra-subduction zone.     

Exploring the ocean for hydrothermal venting: New techniques,new discoveries,new insights

Enumerating active hydrothermal fields on the seafloor has been a challenge since their discovery almost 40 years ago. High-temperature hydrothermal fields are readily discoverable, primarily by detecting mineral-laden plumes, but low-temperature, particle-poor vent fields resist discovery. Decades of exploration for vent fields have covered, though often cursorily, about one-third of the global lengths of both oceanic spreading ridges (OSRs) and volcanic arcs, identifying some 630 active vent fields. About 80% of these fields are on OSRs, and the spatial frequency of those fields is currently estimated as ∼0.5–5/100 km, generally increasing with spreading rate. Over the last decade, however, a few detailed surveys have added sensors capable of detecting ephemeral chemical tracers (oxidation-reduction potential) in addition to standard sensors that detect quasi-conservative optical tracers (such as light backscattering). This approach has revealed a new view of the distribution of venting fields along fast-spreading (>55 mm/yr) OSRs. Studies of four such ridge sections totaling 1470 km length suggest that the present inventory of vent fields may underestimate the true global population of vent fields on fast-spreading OSRs by a factor of 3–6. This increase implies that ridge axes are unexpectedly “leaky” reservoirs, from which hydrothermal fluids escape at far more sites than presently assumed; that the supply of dissolved hydrothermal iron, which may be fertilizing the primary production of the Southern Ocean, is higher than now calculated; and that present estimates of recoverable sulfide tonnage from ridge axes may be too low. Along slow-spreading ridges, which account for 60% of the global OSR length and 86% of known sulfide tonnage, expansive axial valleys present special exploration challenges that will not be easily overcome.     

S-33 constraints on the seawater sulfate contribution in modern seafloor hydrothermal vent sulfides

Sulfide sulfur in mid-oceanic ridge hydrothermal vents is derived from leaching of basaltic-sulfide and seawater-derived sulfate that is reduced during high temperature water rock interaction. Conventional sulfur isotope studies, however, are inconclusive about the mass-balance between the two sources because ³⁴S/³²S ratios of vent fluid H₂S and chimney sulfide minerals may reflect not only the mixing ratio but also isotope exchange between sulfate and sulfide. Here, we show that high-precision analysis of S-33 can provide a unique constraint because isotope mixing and isotope exchange result in different Δ³³S (≡δ³³S-0.515 δ³⁴S) values of up to 0.04‰ even if δ³⁴S values are identical. Detection of such small Δ³³S differences is technically feasible by using the SF₆ dual-inlet mass-spectrometry protocol that has been improved to achieve a precision as good as 0.006‰ (2σ).Sulfide minerals (marcasite, pyrite, chalcopyrite, and sphalerite) and vent H₂S collected from four active seafloor hydrothermal vent sites, East Pacific Rise (EPR) 9-10°N, 13°N, and 21°S and Mid-Atlantic Ridge (MAR) 37°N yield Δ³³S values ranging from −0.002 to 0.033 and δ³⁴S from −0.5‰ to 5.3‰. The combined δ³⁴S and Δ³³S systematics reveal that 73 to 89% of vent sulfides are derived from leaching from basaltic sulfide and only 11 to 27% from seawater-derived sulfate. Pyrite from EPR 13°N and marcasite from MAR 37°N are in isotope disequilibrium not only in δ³⁴S but also in Δ³³S with respect to associated sphalerite and chalcopyrite, suggesting non-equilibrium sulfur isotope exchange between seawater sulfate and sulfide during pyrite precipitation. Seafloor hydrothermal vent sulfides are characterized by low Δ³³S values compared with biogenic sulfides, suggesting little or no contribution of sulfide from microbial sulfate reduction into hydrothermal sulfides at sediment-free mid-oceanic ridge systems. We conclude that ³³S is an effective new tracer for interplay among seawater, oceanic crust and microbes in subseafloor hydrothermal sulfur cycles.     

深海热液金属硫化物矿电性结构

深海热液金属硫化物矿位于水深数千米的大洋洋底,其形态、规模及电性参数难为人知,迄今尚未有由实测数据推导其电性结构的研究.依托于“大洋一号”,在大西洋洋中脊、西南印度洋洋中脊实施了多次深海热液金属硫化物矿探测试验,实地采集热液金属硫化物矿瞬变电磁响应数据,并对试验数据进行反演分析.分析表明:大西洋TAG(trans-Atlantic geotraverse)热液区及西南印度洋49°4′E,37°5′S热液区内,深海热液金属硫化物矿形似生长于洋壳内的“蘑菇”,矿体呈透镜状或似层状结构,分布于热液喷口的卤水池内,电阻率约为0.1 Ω·m,规模为50~250 m,厚度范围为20~50 m;热液烟囱直径为10~50 m,周围岩石发生热液蚀变,蚀变岩石电阻率在0.2~0.5 Ω·m,以热液通道为中心呈圈层状变化.依据深海热液金属硫化物矿的形态特征及电性参数,矿体的电性结构模型可简化为T型异常体.      

Sulfur and lead isotopic compositions of massive sulfides from deep-sea hydrothermal systems: Implications for ore genesis and fluid circulation

Studies of sulfur and lead isotopic compositions in hydrothermal deposits are an important tool to determine the source and processes of both sulfur and lead, and to understand the origin of hydrothermal ore deposits. Here, the sulfur and lead isotopic compositions of sulfide minerals have been studied for different hydrothermal fields in the East Pacific Rise (EPR), Mid-Atlantic Ridge (MAR), Central Indian Ridge (CIR), Southwest Indian Ridge (SWIR), and North Fiji Basin (NFB). The sulfur isotopic compositions of the studied sulfide samples are variable (δ³⁴S 0.0 to 9.6‰, avg. δ³⁴S 4.7‰; n = 60), being close to the associated igneous rocks (~ 0‰ for, e.g., basalt, serpentinized peridotite), which may reflect the S in the sulfide samples is derived mainly from the associated igneous rocks, and a relatively small proportion (< 36%) of seawater sulfur incorporated into these sulfides during mixing between seawater (δ³⁴S 21‰) and hydrothermal fluid. In contrast for a mixed origin for the source of S, the majority of the lead isotopic compositions (²⁰⁶Pb/²⁰⁴Pb 17.541 ± 0.004 to 19.268 ± 0.001, ²⁰⁷Pb/²⁰⁴Pb 15.451 ± 0.001 to 15.684 ± 0.001, ²⁰⁸Pb/²⁰⁴Pb 37.557 ± 0.008 to 38.988 ± 0.002, n = 21) of the sulfides possess a basaltic Pb isotopic composition, suggesting that the lead in the massive sulfide is mainly leached from local basaltic rocks that host the sub-seafloor hydrothermal systems in sediment-free mid-ocean ridges and mature back-arc basins. Furthermore, sulfide minerals in the super-fast and fast spreading mid-ocean ridges (MORs) exhibit less spread in their the δ³⁴S values compared to sulfides from super-slow, and slow spreading MORs, which is most easily explained as a lesser degree of fluid-rock interaction and hydrothermal fluid-seawater mixing during hydrothermal ore-forming process. Additionally, the S and Pb isotope compositions of sulfides are controlled by the fluid processes for forming seafloor massive sulfide deposits. We demonstrate that the variable sulfur and lead isotopic compositions exhibit a relationship with the sulfur and lead sources, fluid–rock interaction, and fluid–seawater mixing.     

Cu–(Ni–Co–Au)-bearing massive sulfide deposits associated with mafic–ultramafic rocks of the Main Urals Fault,South Urals: Geological structures,ore textural and mineralogical features,comparison with modern analogs

Cu-rich massive sulfide deposits associated with mafic–ultramafic rocks in the southern portion of the Main Urals Fault (MUF) are characterized by variable enrichments in Ni (up to 0.45 wt.%), Co (up to 10 wt.%) and Au (up to 16 ppm in individual hand-specimens). The Cu (Ni–Co)-rich composition of MUF deposits, as opposed to the Cu (Zn)-rich composition of more eastward massive sulfide deposits of broadly similar age along the western flank of the Magnitogorsk arc, reflects the abundance of seafloor-exposed, Ni–Co-rich ultramafic rocks in the most external portion of the Early-Devonian Magnitogorsk forearc. Morphological, textural, and compositional differences between individual deposits are interpreted to be the result of the sulfide deposition style and, in part, of the original subseafloor lithology. One deposit produced by dominantly on-seafloor hydrothermal processes is characterized by pyrite–marcasite ≫ pyrrhotite, not so low Zn grades (occasionally up to 2 wt.%), abundant clastic facies and periodical superficial oxidation. Deposits produced by dominantly subseafloor hydrothermal processes are characterized by pyrrhotite > pyrite, very low Zn (generally < to ≪ 0.1 wt.%), volumetrically minor clastic facies, and multi-layer deposit morphology. Very low Ni/Co ratios in the on-seafloor deposit may indicate a dominant metal contribution from a mafic rather than ultramafic source. The sulfide mineralization was associated with extensive hydrothermal alteration of the host ultramafic and mafic rocks, leading to formation of abundant talc, talc–carbonate and chlorite rocks. Occurrence of large volumes of such altered lithotypes in ophiolitic belts may be considered as a potential searching criteria for MUF-type (Cu, Co, Ni)-deposits. In spite of the contrasting geodynamic environment, geological, geochemical, textural and mineralogical peculiarities of the MUF deposits in many respects are similar to those of ultramafic-hosted massive sulfide deposits along the Mid-Atlantic Ridge. In geological time, supra subduction-zone settings appear to have been more effective than mid-ocean ridge settings for preservation of ultramafic-hosted massive sulfide deposits.     

Co-diagenesis of iron and phosphorus in hydrothermal sediments from the southern East Pacific Rise: Implications for the evaluation of paleoseawater phosphate concentrations

We present a detailed study of the co-diagenesis of Fe and P in hydrothermal plume fallout sediments from ∼19°S on the southern East Pacific Rise. Three distal sediment cores from 340-1130 km from the ridge crest, collected during DSDP Leg 92, were analysed for solid phase Fe and P associations using sequential chemical extraction techniques. The sediments at all sites are enriched in hydrothermal Fe (oxyhydr)oxides, but during diagenesis a large proportion of the primary ferrihydrite precipitates are transformed to the more stable mineral form of goethite and to a lesser extent to clay minerals, resulting in the release to solution of scavenged P. However, a significant proportion of this P is retained within the sediment, by incorporation into secondary goethite, by precipitation as authigenic apatite, and by readsorption to Fe (oxyhydr)oxides. Molar P/Fe ratios for these sediments are significantly lower than those measured in plume particles from more northern localities along the southern East Pacific Rise, and show a distinct downcore decrease to a depth of ∼12 m. Molar P/Fe ratios are then relatively constant to a depth of ∼35 m. The Fe and P speciation data indicate that diagenetic modification of the sediments is largely complete by a depth of 2.5 m, and thus depth trends in molar P/Fe ratios can not solely be explained by losses of P from the sediment by diffusion to the overlying water column during early diagenesis. Instead, these sediments are likely recording changes in dissolved P concentrations off the SEPR, possibly as a result of redistribution of nutrients in response to changes in oceanic circulation over the last 10 million years. Furthermore, the relatively low molar P/Fe ratios observed throughout these sediments are not necessarily solely due to losses of scavenged P by diffusion to the overlying water column during diagenesis, but may also reflect post-depositional oxidation of pyrite originating from the volatile-rich vents of the southern East Pacific Rise. This study suggests that the molar P/Fe ratio of oxic Fe-rich sediments may serve as a proxy of relative changes in paleoseawater phosphate concentrations, particularly if Fe sulfide minerals are not an important component during transport and deposition.     

Sulfur cycling at the Mid-Atlantic Ridge: A multiple sulfur isotope approach

The role of sulfur in two hydrothermal vent systems, the Logatchev hydrothermal field at 14°45′N/44°58′W and several different vent sites along the southern Mid-Atlantic Ridge (SMAR) between 4°48′S and 9°33′S and between 12°22′W and 13°12′W, is examined by utilizing multiple sulfur isotope and sulfur concentration data. Isotope compositions for sulfide minerals and vent H₂S from different SMAR sites range from + 1.5 to + 8.9‰ in δ³⁴S and from + 0.001 to + 0.051‰ in Δ³³S. These data indicate mixing of mantle sulfur with sulfur from seawater sulfate. Combined δ³⁴S and Δ³³S systematics reveal that vent sulfide from SMAR is characterized by a sulfur contribution from seawater sulfate between 25 and 33%. This higher contribution, compared with EPR sulfide, indicates increased seawater sulfate reduction at MAR, because of a deeper seated magma chamber and longer fluid upflow path length, and points to fundamental differences with respect to subsurface structures and fluid evolution at slow and fast spreading mid-ocean ridges.Additionally, isotope data uncover non-equilibrium isotopic exchange between dissolved sulfide and sulfate in an anhydrite bearing zone below the vent systems at fluid temperatures between 335 and 400 °C. δ³⁴S values between + 0.2 to + 8.8‰ for dissolved and precipitated sulfide from Logatchev point to the same mixing process between mantle sulfur and sulfur from seawater sulfate as at SMAR. δ³⁴S values between ? 24.5 and + 6.5‰ and Δ³³S values between + 0.001 and + 0.125‰ for sulfide-bearing sediments and mafic/ultramafic host rocks from drill cores taken in the region of Logatchev indicate a clear contribution of biogenic sulfides formed via bacterial sulfate reduction. Basalts and basaltic glass from SMAR sites with Δ³³S = ? 0.008‰ reveal lower Δ³³S lower values than suggested on the basis of previously published isotopic measurements of terrestrial materials.We conclude that the combined use of both δ³⁴S and Δ³³S provides a more detailed picture of the sulfur cycling in hydrothermal systems at the Mid-Atlantic Ridge and uncovers systematic differences to hydrothermal sites at different mid-ocean ridge sites. Multiple sulfur isotope measurements allow identification of incomplete isotope exchange in addition to isotope mixing as a second important factor influencing the isotopic composition of dissolved sulfide during fluid upflow. Furthermore, based on Δ³³S we are able to clearly distinguish biogenic from hydrothermal sulfides in sediments even when δ³⁴S were identical.     

Massive sulfides of Mount Jourdanne along the super-slow spreading Southwest Indian Ridge and their genesis

Modern massive sulfide deposits are known to occur in diverse tectonic settings and it is generally expected that hydrothermal deposits of similar geological settings shall have more or less similar mineralogical and geochemical signatures. However, the Mount Jourdanne sulfide deposits along the super-slow spreading Southwest Indian Ridge deviate from this common concept. These sulfide precipitates are Zn-rich (up to 35 wt.%) and are characterized by high concentrations of Pb (≤ 3.5 wt.%), As (≤ 1.1 wt.%), Ag (≤ 0.12 wt.%), Au (≤ 11 ppm), Sb (≤ 967 ppm), and Cd (≤ 0.2 wt.%) which are unusual for a modern sediment-free mid-oceanic ridge system. Therefore, we have reinvestigated the sulfide samples collected during the INDOYO cruise in 1998, in order to explain their unusual mineralogy and geochemical composition. The sulfide samples are polymetallic and are classified as: a) chimneys, b) mounds, and c) hydrothermal breccias. The chimneys are small tube-like symmetrical bodies (30–40 cm high; ~ 10 cm diameter) and consist mainly of sphalerite and less chalcopyrite, set in a matrix of late amorphous silica. The inner wall shows a late-stage colloform sphalerite containing co-precipitates of galena and/or Pb–As sulfosalts. In contrast, the mound samples are dominated either by Fe-sulfides (pyrite) or by a mixture of pyrite and chalcopyrite with less sphalerite, pyrrhotite, amorphous silica and barite. Both, the chimney and mound samples, are characterized by layering and mineral zonation. The hydrothermal breccias are highly altered and mineralogically heterogeneous. They consist of silicified basaltic material that are impregnated with sulfides and contain cm-sized chimney fragments within a matrix of low-temperature minerals such as sphalerite and pyrite. The latter fragments mainly consist of chalcopyrite with isocubanite lamellae. In addition, these breccias contain late-stage realgar, boulangerite, galena, Pb–As sulfosalts and barite that are mostly confined to vugs or fractures. At least five mineralogical associations are distinguished that indicate different thermal episodes ranging from black smoker mineralization conditions to cessation of the hydrothermal activity. Based on the mineralogical associations and established literature in this regard, it is inferred that the mineralization at Mt. Jourdanne occurred mainly in three temperature domains. Above 300 °C, the chalcopyrite (with isocubanite)–pyrrhotite association formed whereas the sphalerite dominated assemblage with much less chalcopyrite and pyrite formed around and below 300 °C. The late-stage mineralization (below 200 °C) contains colloform sphalerite, galena, Pb–As sulfosalts, realgar and barite. The unusual mineralogy and trace element chemistry for this modern VHMS deposit could be explained assuming hydrothermal leaching of some felsic differentiates underneath the basaltic cover and subsequent zone refining processes.     

Hydrothermalism in the Tyrrhenian Sea: Inorganic and microbial sulfur cycling as revealed by geochemical and multiple sulfur isotope data

The Palinuro volcanic complex and the Panarea hydrothermal field, both located in the Tyrrhenian Sea (Italy), are associated with island arc magmatism and characterized by polymetallic sulfide mineralization. Dissolved sulfide concentrations, pH, and Eh measured in porewaters at both sites reveal a variable hydrothermal influence on porewater chemistry.Multiple sulfur isotopic measurements for disseminated sulfides (CRS: chromium reducible sulfur) extracted from sediments at Palinuro yielded a broad range in δ³⁴S range between ?29.8 and + 10.2‰ and Δ³³S values between + 0.015 and + 0.134‰. In contrast, sediments at Panarea exhibit a much smaller range in δ³⁴S_CRS with less negative values between ?11.3 and ?1.8‰. The sulfur isotope signatures are interpreted to reflect a mixture between hydrothermal and biogenic sulfide, with a more substantial biogenic contribution at Panarea.Multiple sulfur isotope measurements were performed on sulfides and elemental sulfur from drill core material from the Palinuro massive sulfide complex. δ³⁴S and Δ³³S values for pyrite between ?32.8 and ?1.1‰ and between ?0.012 to + 0.042‰, respectively, as well as for elemental sulfur with δ³⁴S and Δ³³S values between ?26.7 and ?2.1‰ and between + 0.035 and + 0.109‰, respectively, point to a microbial origin for much of the sulfide and elemental sulfur studied. Moreover, data suggest a coupling of bacterial sulfate reduction, sulfide oxidation and sulfur disproportionation. In addition, δ³⁴S values for barite between + 25.0 and + 63.6‰ are also in agreement with high microbial turnover of sulfate at Palinuro.Although a magmatic SO₂ contribution towards the formation of the Palinuro massive sulfide complex is very likely, the activity of different sulfur utilizing microorganisms played a fundamental role during its formation. Thus, porewater and multiple sulfur isotope data reveal differences in the hydrothermal activity at Palinuro and Panarea drill sites and underline the importance of microbial communities for the origin of massive sulfide mineralizations in the hydrothermal subsurface.     

西南印度洋洋中脊表层沉积物地球化学特征及其热液活动指示意义

洋中脊热液硫化物勘探技术的滞后,严重制约了对海底热液硫化物资源的勘探开发。以我国西南印度洋硫化物勘探合同区域采集的25个表层沉积物样品为研究对象,基于主量、微量和稀土元素检测数据,采用元素含量特征、相关性分析、元素对比值、特征元素三角图解,以及稀土元素分馏特征值等手段,开展沉积物热液信息研究。结果表明:样品所代表的大部分研究区域内主要为钙质生物沉积,部分样品元素地球化学特征受沉积物中玄武岩风化碎屑的影响,龙旂热液区的部分样品中表现出一定的热液迹象,稀土元素分馏特征和配分模式、（Al+K）?Mg?（Fe+Mn）三角图解可较好地指示热液活动。研究不仅为我国在西南印度洋的硫化物勘探提供基础数据参考,同时也是对海底热液硫化物勘探的沉积物地球化学找矿理论和方法的初步探索。     

蛇纹岩化对洋中脊超基性岩热液硫化物成矿的影响:来自青藏高原德尔尼铜矿床的启示

洋中脊超基性岩热液成矿系统通常与洋底核杂岩构造有关,多发育大型矿床,具有巨大的资源前景。然而,受大洋调查取样手段的限制,超基性岩蛇纹岩化对成矿的影响仍需进一步研究。德尔尼铜矿床是地质历史上该类矿床的典型案例,对于理解其成矿模式,以及大洋硫化物勘探具有指导意义。本文选取德尔尼铜矿床块状硫化物样品进行黄铁矿的S同位素分析,结果表明其δ³⁴S值主要分布在-0.4‰～+6.3‰。结合前人研究发现,形成于深部网脉状、条带状矿石中的δ³⁴S值为负值,而经历表层喷流和破碎作用的块状和角砾状矿石中的δ³⁴S值为正值,二者呈对称分布,这主要是由于还原条件下岩浆排气产生的SO_2和H_2S动态平衡并逐渐沉淀S^2-,表明蛇纹岩化提供的还原环境对热液系统演化产生了重要影响。然而,磁黄铁矿和矿床Ni的分布指示成矿物质中超基性岩的贡献较小,主要物质来源是洋中脊深部的基性岩浆,通过热液循环将物质运移至海底并喷流成矿。对比现今超基性岩赋矿的高温热液硫化物矿床,德尔尼铜矿床形成温度更低,代表了超基性岩赋矿热液硫化物中的中温端元,表明在距离拆离面一定距离(约2～4km)的位置也可能形成大型的热液硫化物矿床,这对于现今洋中脊热液硫化物勘探具有一定的指导意义。     

What processes at mid-ocean ridges tell us about volcanogenic massive sulfide deposits

Episodic seafloor spreading, ridge topography, and fault movement at ridges find (more extreme) analogs in the arc and back-arc setting where the volcanogenic massive sulfide (VMS) deposits that we mine today were formed. The factors affecting sulfide accumulation efficiency and the extent to which sulfides are concentrated spatially are the same in both settings, however. The processes occurring at mid-ocean ridges therefore provide a useful insight into those producing VMS deposits in arcs and back-arcs. The critical observation investigated here is that all the heat introduced by seafloor spreading at mid-ocean ridges is carried out of the crust within a few hundred meters of the ridge axis by ??350°C hydrothermal fluids. The high-temperature ridge hydrothermal systems are tied to the presence of magma at the ridge axis and greatly reduce the size and control the shape of axial magma intrusions. The amount of heat introduced to each square kilometer of ocean crust during its formation can be calculated, and its removal by high-temperature convection allows calculation of the total base metal endowment of the ocean basins. Using reasonable metal deposition efficiencies, we conclude that the ocean floor is a giant VMS district with metal resources >600 times the total known VMS reserves on land and a copper resource which would last >6,000?years at current production rates.     

慢速—超慢速扩张西南印度洋中脊研究进展

西南印度洋中脊具有慢速—超慢速扩张速率和斜向扩张的特征,是全球洋中脊系统研究的热点之一,也是研究海底构造环境、热液活动、地幔深部过程及其动力学机制的重要区域。在前人工作的基础上较为详细地介绍了西南印度洋中脊的研究历史、地形划分、扩张速率及其构造特征,归纳了西南印度洋中脊热液活动及岩石地球化学特征,探讨了超慢速扩张洋脊和超镁铁质岩系热液系统的特殊性,并认为超慢速扩张洋脊广泛暴露的地幔岩及其蛇纹石化作用、超镁铁质岩系热液系统以及热液硫化物成矿作用是西南印度洋中脊今后研究的重要内容。     

Widespread tectonic extension at the Central Indian Ridge between 8°S and 18°S

The middle part of the Central Indian Ridge (MCIR) between 8°S and 18°S is representative of mid-ocean ridges in the Indian Ocean but has not previously been systematically surveyed. Here we present results from the first high-resolution mapping survey over both on- and off-axis sections of the MCIR including multibeam bathymetry, magnetics, hydrocasting, and seabed sampling. The 700-km-long MCIR consists of six first-order segments that are offset by > 30 km along well-developed transform faults. Three of the first-order segments are further divided into seven second-order segments with < 30 km offset along non-transform discontinuities. We have recognized for the first time 11 prominent ocean core complexes (OCCs). These occur at nearly all segment ends, corresponding to an occurrence every 60 km of the surveyed ridge. Seafloor spreading model studies using magnetic reversals show that the MCIR is a slow-spreading ridge with average full opening rates ranging from 33.7 to 45.1 mm/yr, increasing from north to south. The highly curved and intermittent axial ridge geometry, rugged flank fabric, variation in the depth and width of the middle valley, and the frequent occurrences of ocean core complexes and non-transform discontinuities demonstrate that asymmetric accretionary processes are dominant along the ridge. The spreading rate symmetry combined with morphotectonic features, reveal that the MCIR segments developed mainly via tectonic extension with little magmatism. Segments with asymmetric accretion controlled by tectonic extension makes up ~ 96% of the MCIR, whereas symmetric accretion controlled by robust magmatism make up < 4%. Hydrothermal plumes with high methane concentrations occur frequently over the OCCs. This finding indicates that abundant OCCs exposed by detachment faults lead to extensive hydrothermal circulation at off-axis areas and that detachment faults are the primary fluid path for hydrothermal fluid circulation at off-axis regions. Serpentinization of mantle-derived rock at OCCs may be one of the major sources of heat and methane in off-axis areas.     

The formation of porphyry copper deposits

Copper is a moderately incompatible chalcophile element. Its behavior is strongly controlled by sulfides. The speciation of sulfur is controlled by oxygen fugacity. Therefore, porphyry Cu deposits are usually oxidized (with oxygen fugacities > ΔFMQ +2) (Mungall 2002; Sun et al. 2015). The problem is that while most of the magmas at convergent margins are highly oxidized, porphyry Cu deposits are very rare, suggesting that high oxygen fugacity alone is not sufficient. Partial melting of mantle peridotite even at very high oxygen fugacities forms arc magmas with initial Cu contents too low to form porphyry Cu deposits directly (Lee et al. 2012; Wilkinson 2013). Here we show that partial melting of subducted young oceanic slabs at high oxygen fugacity (>ΔFMQ +2) may form magmas with initial Cu contents up to >500 ppm, favorable for porphyry mineralization. Pre-enrichment of Cu through sulfide saturation and accumulation is not necessarily beneficial to porphyry Cu mineralization. In contrast, re-melting of porphyritic hydrothermal sulfide associated with iron oxides may have major contributions to porphyry deposits. Thick overriding continental crust reduces the “leakage” of hydrothermal fluids, thereby promoting porphyry mineralization. Nevertheless, it is also more difficult for ore forming fluids to penetrate the thick continental crust to reach the depths of 2–4 km where porphyry deposits form.     

In situ measurement of dissolved chloride in high temperature hydrothermal fluids

The ability to continuously monitor chemical properties of hydrothermal vent effluents for extended periods of time is essential to understanding dynamic processes responsible for the temporally variable nature of mid-ocean ridge hydrothermal systems. Although instruments do exist for some parameters, there has been no sensor capable of measuring the chloride concentration, an indicator of possible phase separation, on a real-time and long-term basis. In this article, we discuss the construction of a novel instrument which measures solution resistance as a proxy for chloride concentration. The sensor consists of four gold electrodes embedded in a cylindrical ZrO₂ ceramic housing. It has been successfully deployed in several high temperature vents at the Main Endeavour Field (MEF) on the Juan de Fuca ridge in the NE Pacific, and calibrated under simulated hydrothermal conditions ranging up to 380 °C and 300 bar. The in situ data clearly demonstrate a tidal influence on the effluent from some high temperature vents possibly relating to a subsurface mixing process involving non-seawater end-members. Non-tidal changes are used to constrain the sequence and type of controls operating on fluids circulating within the subsurface.     

Dating the giant Zhuxi W–Cu deposit (Taqian–Fuchun Ore Belt) in South China using molybdenite Re–Os and muscovite Ar–Ar system

The recently discovered Zhuxi W–Cu ore deposit is located within the Taqian–Fuchun Ore Belt in the southeastern edge of the Yangtze Block, South China. Its inferred tungsten resources, based on new exploration data, are more than 280 Mt by 2016. At least three paragenetic stages of skarn formation and ore deposition have been recognized: prograde skarn stage; retrograde stage; and hydrothermal sulfide stage. Secondly, greisenization, marmorization and hornfels formation are also observed. Scheelite and chalcopyrite are the dominant metal minerals in the Zhuxi deposit and their formation was associated with the emplacement of granite stocks and porphyry dykes intruded into the surrounding Carboniferous carbonate sediments (Huanglong and Chuanshan formations) and the Neoproterozoic slate and phyllites. The scheelite was mostly precipitated during the retrograde stage, whereas the chalcopyrite was widely precipitated during the hydrothermal sulfide stage. A muscovite ⁴⁰Ar/³⁹Ar plateau age of about 150 Ma is interpreted as the time of tungsten mineralization and molybdenite Re–Os model ages ranging from 145.9 ± 2.0 Ma to 148.7 ± 2.2 Ma (for the subsequent hydrothermal sulfide stage of activity) as the time of the copper mineralization. Our new molybdenite Re–Os and muscovite ⁴⁰Ar/³⁹Ar dating results, along with previous zircon U–Pb age data, indicate that the hydrothermal activity from the retrograde stage to the last hydrothermal sulfide stage lasted up to 5 Myr, from 150.6 ± 1.5 to 145.9 ± 1 Ma, and is approximately coeval or slightly later than the emplacement of the associated granite porphyry and biotite granite. The new ages reported here confirm that the Zhuxi tungsten deposit represents one of the Mesozoic magmatic–hydrothermal mineralization events that took place in South China in a setting of lithospheric extension during the Late Jurassic (160–150 Ma). It is suggested that mantle material played a role in producing the Zhuxi W–Cu mineralization and associated magmatism.     

Isotopic evidence (Sr/Sr, δLi) for alteration of the oceanic crust at deep-rooted mud volcanoes in the Gulf of Cadiz, NE Atlantic Ocean

The chemical and isotopic composition of pore fluids is presented for five deep-rooted mud volcanoes aligned on a transect across the Gulf of Cadiz continental margin at water depths between 350 and 3860 m. Generally decreasing interstitial Li concentrations and ⁸⁷Sr/⁸⁶Sr ratios with increasing distance from shore are attributed to systematically changing fluid sources across the continental margin. Although highest Li concentrations at the near-shore mud volcanoes coincide with high salinities derived from dissolution of halite and late-stage evaporites, clayey, terrigenous sediments are identified as the ultimate Li source to all pore fluids investigated. Light δ⁷Li values, partly close to those of hydrothermal vent fluids (δ⁷Li: +11.9‰), indicate that Li has been mobilized during high-temperature fluid/sediment or fluid/rock interactions in the deep sub-surface. Intense leaching of terrigenous clay has led to radiogenic ⁸⁷Sr/⁸⁶Sr ratios (0.7106) in pore fluids of the near-shore mud volcanoes. In contrast, non-radiogenic ⁸⁷Sr/⁸⁶Sr ratios (0.7075) at the distal locations are attributed to admixing of a basement-derived fluid component, carrying an isotopic signature from interaction with the basaltic crust. This inference is substantiated by temperature constraints from Li isotope equilibrium calculations suggesting exchange processes at particularly high temperatures (>200 °C) for the least radiogenic pore fluids of the most distal location.Advective pore fluids in the off-shore reaches of the Gulf of Cadiz are influenced by successive exchange processes with both oceanic crust and terrigenous, fine-grained sediments, resulting in a chemical and isotopic signature similar to that of fluids in near-shore ridge flank hydrothermal systems. This suggests that deep-rooted mud volcanoes in the Gulf of Cadiz represent a fluid pathway intermediate between mid-ocean ridge hydrothermal vent and shallow, marginal cold seep. Due to the thicker sediment coverage and slower fluid advection rates, the overall geochemical signature is shifted towards the sediment-diagenetic signal compared to ridge flank hydrothermal environments.     

Seawater contribution to polymetallic Ni–Mo–PGE–Au mineralization in Early Cambrian black shales of South China: Evidence from Mo isotope,PGE, trace element,and REE geochemistry

The Early Cambrian black shale sequence of the Niutitang Formation in South China hosts a synsedimentary, organic carbon-rich, polymetallic sulfide layer with extreme metal concentrations, locally mined as polymetallic Ni–Mo–PGE–Au ore. In combination with previously reported data, we present Mo isotope, platinum-group element (PGE), and trace and rare-earth element (REE) data for the polymetallic sulfide ores and host black shales from four mine sites (Dazhuliushui and Maluhe in Guizhou Province, and Sancha and Cili in Hunan Province, respectively), several hundred kilometers apart. The polymetallic sulfide ores have consistently heavy δ^98/95Mo values of 0.94 to 1.38‰ (avg. 1.13 ± 0.14‰, 1σ, n = 11), and the host black shale and phosphorite have slightly more variable δ^98/95Mo values of 0.81‰ to 1.70‰ (n = 14). This latter variation is due to variable paleoenvironmental conditions from suboxic to euxinic, and partly closed-system fractionation in isolated marine sedimentary basins. Both the polymetallic sulfides and host black shales show PGE distribution patterns similar to that of present-day seawater, but different from those of ancient submarine-hydrothermal deposits and modern submarine hydrothermal fluids. The polymetallic sulfide bed has a generally consistent metal enrichment by a factor of 10⁷ compared to present-day seawater. PAAS-normalized REE + Y patterns of the polymetallic sulfide bed are characterized by a remarkably positive Y anomaly, consistent with an origin of the REE predominantly from seawater. Small positive Eu anomalies in some of the sulfide ores could reflect minor hydrothermal components involved. The Mo isotope, PGE, and trace and rare-earth element geochemical data suggest that metals in the polymetallic Ni–Mo–PGE–Au sulfide ore layer were scavenged mostly from Early Cambrian seawater, by both in-situ precipitation and local re-deposition of sulfide clasts.