Investigation of Groundwater Potential Zones in Hard Rock Terrain,Wadi Na'man,Saudi Arabia

In arid and hyper-arid zones, groundwater exploration is one of the most significant ways to locate potential new water supplies. Geophysical prospecting is currently the most successfully used method for locating new supplies, but it is rather costly. Satellite remote sensing (RS) detection, however, with its integration of Geographic Information Systems (GIS) provides the best chance for identifying and initially evaluating water-bearing formations. In the western part of Saudi Arabia, Wadi Na'man has for centuries been one of the major water sources for the city of Makkah Al-Mukarramah. It is therefore very important to find appropriate groundwater potential (GP) zones in this wadi for water supply. This study utilizes RS and GIS techniques, and also studies the hydrogeological, geological, and geomorphological characteristics that have significant impact on groundwater occurrence in Wadi Na'man. Representative layers are generated for each component and each given a weight ratio that depends on the level of influence. The overlay and integration of these thematic layers was used to produce a map that shows the most promising potential groundwater areas and classifies local potentials as either low, medium, or high. The results also reveal that the areas overall-rated as “promising” (i.e., classified as medium or high) represent approximately 17-25% of the total basin area and consist mainly of Quaternary sediments and connected fractured rock areas.     

Source mechanisms of the June 2004 Tabuk earthquake sequence, Eastern Red Sea margin, Kingdom of Saudi Arabia

A sequence of earthquakes took place in June 2004 approximately 60 km southeast of Tabuk, Saudi Arabia. The first felt event (M _W = 3.9) occurred on June 9 and caused minor damage in the epicentral area according to the National Earthquake Information Center and the local reports. Another moderate size event occurred on June 22 (M _W = 5.1) and was followed by a few felt aftershocks without any reported damage. This earthquake sequence caused considerable alarm at Tabuk and highlights the fact that damaging earthquakes can occur in this region away from the major plate boundary in the Red Sea. Being the largest well-recorded event in the area for which the digital and broadband records from Saudi Arabia, Egypt, Israel, Jordan, Turkey, Cyprus, and Kuwait are available, it provides an excellent opportunity to study the tectonic process and present day stress field acting on this area. The digital records from these regional networks were used to relocate the largest three events of this sequence. Focal mechanisms were obtained from full waveform inversion and indicate normal faulting mechanisms with two nodal planes oriented NW–SE in parallel to the faults bounding the Tabuk graben and the Red Sea rift axis. These events originated at shallow focal depths of 4–5 km, possibly contributing to the widely felt ground motions. These events offer a unique opportunity to study the active tectonics of the region as well as inform future studies of seismic hazard in northwestern Saudi Arabia, the Gulf of Aqaba, and eastern Egypt.     

Hydrogeology of Wadi Al-Yammaniyah, Saudi Arabia

Quaternary alluvium, ranging in thickness from a few to 100 meters underlain by Precambrian rocks of metamor-phic and igneous origin, constitutes an important source of ground water in Wadi Al-Yammaniyah, Saudi Arabia. The purpose of this report is to assess the hydraulic properties, quality of water, and estimated change in storage in waterbearing rocks in the area. The results of eight pumping tests carried out in hand-dug, large-diameter wells, indicate that the hydraulic conductivity of the alluvial aquifer ranges from 5.6 × 10⁻⁵ to 1.85 × 10⁻³ cm/second (3.36 × 10⁻⁵ to 1.11 × 10⁻³ m/minute) and that its storativity varies from 8.23 × 10⁻² to 1.17 × 10⁻¹. The aquifer is replenished by sporadic but intensive rainfall of short duration. The present withdrawal is only about 10 percent of the annual recharge which is estimated at 52 × 10⁶ m³. It is shown that there is a substantial potential for the future development of potable ground water which would be required for the development of the area.     

Groundwater availability in the Khulais Plain,western Saudi Arabia

Abstract

The Khulais plain lies within a typical arid area in western Saudi Arabia. Groundwater occurs within two aquifers in the area: the alluvium of the wadi system, and the sandy layers of the Cretaceous-Tertiary sedimentary succession. Detailed field investigations and laboratory analysis helped in determining the aquifer properties for each of the water-bearing units. Groundwater movement has been thoroughly studied, and distribution maps prepared to explain the variations in transmissivity, permeability, porosity and specific yield. An attempt has been made to estimate volumes of groundwater flow towards the plain. This study presents a first attempt towards determining groundwater availability in the Cretaceous-Tertiary succession of this part of the world.     

Dissolved organic matter in coastal waters at Jeddah,Saudi Arabia

Water samples collected during April 1982–April 1983 from Red Sea coastal waters at Jeddah, Saudi Arabia, were investigated for dissolved organic carbon, dissolved organic nitrogen, dissolved lipid, dissolved organic phosphorus, dissolved monosaccharides, total dissolved sugars and dissolved polysaccharides. All showed extremely high values at two stations. This can be attributed to the direct effect of untreated wastes on these two locations and the limited water exchange between the study area and the open sea.     

Geostatistical modelling of the Wasia aquifer in Central Saudi Arabia

Aquifers in sedimentary basins provide a regional domain for the spatial variabilities in geologic, hydrologic, geomorphologic and hydrochemical phenomena. Their study should account for this spatial variability within the study area prior to any formal modelling. A cumulative semivariogram scheme is adopted in this paper for the spatial variability, which is then incorporated with the kriging technique to provide maps of regional variation concerning variables such as storativity, transmissivity, piezometric levels, total dissolved solids and groundwater flow velocity. It is shown that the classical semivariogram models are not capable of accounting for the spatial variability of the Wasia aquifer. Comparison between the cumulative and classical semivariograms are given on the basis of hydrogeologic variables observed in the field. It is concluded, in general, that the cumulative semivariogram modelling of the spatial variability is more effective and yields realistic regional variables.     

Seismic behavior and zoning of the sabkha soils in Jubail industrial city,Saudi Arabia

This study aimed at the micro-level seismic behavior and zoning of the saline sabkha strata in Jubail industrial area in Eastern Saudi Arabia. It encompasses the evaluation of the site-specific seismic response parameters and the liquefaction potential for various possible subsurface conditions under the probable seismic event(s). The approach to achieve the objectives of this study included the following: analysis of geologic, hydrologic, and geotechnical data of the area; performance of field and laboratory dynamic testing; and dynamic modeling and analysis of the subsurface profiles. The results of the simulation have been used to develop liquefaction potential maps and site-specific spectra of the study area, consisting of ten seismic zones under a range of probable peak horizontal ground acceleration (PHA). Results do not show significant probability of liquefaction of the loose soil layers in the study area at the maximum possible design PHA of 0.035 g; however, liquefaction is anticipated at higher PHA values. Site-specific spectral response resulted in values of S _s and S ₁ spectral accelerations to be different as compared to those suggested by local standards. The resulting seismic micro-zonation maps and the corresponding parameters are very useful for the stability analysis of the existing and planned structures in the Jubail area.     

Water balance approach under extreme arid conditions — A case study of Tabalah Basin,Saudi Arabia

Quantification of water balance components, under arid conditions, is essential to the development of water management policies. This study demonstrates the application of the mass water balance approach for the assessment of water resources in a typical watershed located in the southwestern region of Saudi Arabia. The water balance approach was used, on an event basis, to express the amount of precipitation for 13 storms over a three year period, as a percentage of other hydrological components such as runoff, evaporation, and recharge. The study indicated that 63 per cent of precipitation is lost through evaporation from the water surface during flooding, and from the upper layers of the soil surface immediately after storms. Another 32 per cent is stored in the form of soil moisture in the unsaturated layers below the effective evaporation depth. Only 3 per cent of the precipitation was transformed into surface runoff; however, 75 per cent of this contributes towards groundwater recharge. This study has illustrated that the mass water balance approach can be used, with reasonable accuracy, to quantify the components of the hydrological processes under arid conditions, where a reliable data base is available. This, in turn, will help in the development of appropriate water management policies for arid regions.     

The geology and geochronology of Al Wahbah maar crater,Harrat Kishb,Saudi Arabia

Al Wahbah is a large (∼2.2 km diameter, ∼250 m deep) maar crater in the Harrat Kishb volcanic field in western Saudi Arabia. It cuts Proterozoic basement rocks and two Quaternary basanite lava flows, and is rimmed with an eroded tuff ring of debris from the phreatomagmatic explosion that generated the crater. A scoria cone on the northern wall of the crater was dissected by the explosion and exposes a dolerite plug that was intruded immediately prior to crater formation. The dolerite plug yields a ⁴⁰Ar/³⁹Ar age of 1.147 ± 0.004 Ma. This is the best possible estimate of the time Al Wahbah crater formed. It is a few tens of thousand years younger than the age of the lower and upper basalt flows, 1.261 ± 0.021 Ma and 1.178 ± 0.007 Ma respectively. A dolerite dyke exposed within the basement in the wall of the crater is dated at 1.886 ± 0.008 Ma. This is the most precise age so far determined for the initiation of basaltic volcanism of Harrat Kishb, and confirms that it is significantly younger than the other post-rift volcanic provinces in the region. This study provides constrains the timing of humid climatic conditions in the region and suggests that the Quaternary basaltic volcanism that stretches the length of the western side of the Arabian peninsula may prove to be useful for establishing palaeoclimatic conditions.     

Earthquake Potential in the Zagros Region,Iran

Seismic strain and b value are used to quantify seismic potential in the Zagros region (Iran). Small b values (0.69 and 0.69) are related to large seismic moment rates (9.96×10¹⁷ and 4.12×10¹⁷) in southern zones of the Zagros, indicating more frequent large earthquakes. Medium to large b values (0.72 and 0.92) are related to small seismic moment rates (2.94×10¹⁶ and 6.80×10¹⁶) in middle zones of the Zagros, indicating less frequent large earthquakes. Small b value (0.64) is related to medium seismic moment rate (1.38×10¹⁷) in middle to northern zone of the Zagros, indicating frequent large earthquakes. Large b value (0.87) is related to large seismic moment rate (2.29×10¹⁷) in northwestern zone, indicating more frequent large earthquakes. Recurrence intervals of large earthquakes (M > 6) are short in southern (10 and 14 years) and northwestern (13 years) zones, while the recurrence intervals are long in the middle (46 and 114 years) and middle to northern (25 years) zones.     

Estimation of rainfall distribution for the southwestern region of Saudi Arabia

Abstract

Rainfall is the most important input parameter for water resource planning and hydrological studies because flood risk assessment, rainfall harvesting and runoff estimation depend on the rainfall distribution within a region. Due to practical and economic factors, it is not possible to site rainfall stations everywhere, so representative rainfall stations are sited at specific locations. Rainfall distribution is then estimated from such stations. In this study, rainfall distribution in the southwestern region of Saudi Arabia was estimated using kriging, co-kriging and inverse distance weighted (IDW) methods. Historical records of rainfall from 47 stations for the period 1965–2010 and the altitude of these stations were used. The study shows that co-kriging is a better interpolator than the kriging and IDW methods, with a better correlation between actual and estimated monthly average rainfall for the region.     

Sponges and sediments as monitoring tools of metal contamination in the eastern coast of the Red Sea, Saudi Arabia

Sediments and sponges were collected from various locations along the eastern coast of the Red Sea, the Kingdom of Saudi Arabia. Total concentrations of Cd, Zn, Ag, Cu, Pb, As and Hg in the sediments were measured. Metal contamination was not significant in most of the studied sites and only one site was moderately polluted by Zn, Cu, and Pb. Sponges accumulated specific metals readily even though the metal exposure was low in the ambient environment. Contrasting interspecies differences in metal accumulation patterns were observed among the nine collected species of sponges. Significant positive correlations were found between the metal concentrations in the two species of sponges collected from the same sites. The strong ability to accumulate specific metals and the diversity of sponges that live in the Red Sea coastal areas make them a promising biomonitor of metal contamination in the areas.     

Mineralogical variations in the unconsolidated sediments of El Qasr reef, north of Jeddah, west coast of Saudi Arabia

Carbonate mineralogy of El Qasr reef sediments, north of Jeddah on the west coast of Saudi Arabia, was studied by X-ray analysis. Although the mineralogical composition varies only little, there are significant differences in the proportions of aragonite and high Mg-calcite between the environments. Lagoon sediments, which contain relatively more fine-grained material, are characterized by higher aragonite concentrations than the reef flat sediments. Decreasing grain size and increasing aragonite contents towards the centre of the lagoon suggest a transport of aragonitic mud from the shallow reef flat to the lagoon. The amount of fine fraction and occasionally the nature of the coarse fraction rather than the sand-sized skeletal material controls the aragonite concentrations in the reef sediments. Low Mg-calcite, which occurs in minor quantities and is erratically distributed in the reef sediments, is derived from the Pleistocene coral limestone in the coastal plain. Aragonite abundances in the sediments may be considered to delineate lagoon and reef flat environments in a coral reef complex.     

Refined chloride mass‐balance method and its application in Saudi Arabia

The rainfall and infiltration elements of the hydrological cycle in arid regions are characterized by temporal and spatial variations that are random and sporadic. Consequently, the chloride concentration in rainfall has a similar behaviour. Despite this, the classical chloride mass balance (CMB) approach only employs arithmetic and weighted averages for recharge estimation. In this paper, the classical CMB method is modified by taking into account some perceived deficiencies in the methodology. The modified CMB method takes into consideration additional statistical parameters, namely variances and the correlation coefficient between variables concerned based on the application of the perturbation method. Strategic aquifer planning in the Kingdom of Saudi Arabia requires a quick method for estimating groundwater recharge in order to determine the temporal management of available water resources. To demonstrate the difference between the classical and the refined CMB methods, both were applied to a representative basin, i.e. Wadi Yalamlam, in the western part of Saudi Arabia. Based on the refined calculations, recharge to groundwater is found to be 11% of the effective annual rainfall. This refined method provides higher recharge rates because it takes into account the actual variability in the variables concerned and can, thus, improve the accuracy of future groundwater recharge estimation studies. Copyright © 2006 John Wiley & Sons, Ltd.     

Microbial community of cyanobacteria mats in the intertidal zone of oil-polluted coast of Saudi Arabia

Cyanobacterial mats are found at various locations along the coast of the Eastern Province of Saudi Arabia. Those mats were affected by severe oil pollution following 1991 oil spill. In this study, samples from Abu Ali Island were collected at three selected sampling sites across the intertidal zone (Lower, Middle, and Upper) in order to understand the effect of extreme environmental conditions of high salinity, temperature and desiccation on distribution of cyanobacteria along the oil polluted intertidal zone. Our investigation of composition of cyanobacteria and diatoms was carried out using light microscopy, and Denaturant Gradient Gel Electrophoresis (DGGE) technique. Light microscopy identification revealed dominant cyanobacteria to be affiliated with genera Phormidium, Microcoleus, and Schizothrix, and to a lesser extent with Oscillatoria, Halothece, and various diatom species. The analysis of DGGE of PCR-amplified 16S rRNA fragments showed that the diversity of cyanobacteria decreases as we proceed from the lower to the upper intertidal zone. Accordingly, the tidal regime, salinity, elevated ambient air temperature, and desiccation periods have a great influence on the distribution of cyanobacterial community in the oil polluted intertidal zone of Abu Ali Island.     

Mitigating the effects of sand dunes on seismic data from the Rub al Khali basin,Saudi Arabia

The Rub Al Khali region in Saudi Arabia is characterized by the presence of sand dunes separated by salt flats, also called Sabkhas. In general, the elevation of dunes in this region varies between 90 and 250 m above sea level. The presence of these sand dunes, along with the rapidly changing surface topography poses challenges for seismic data acquisition and processing. The high contrast in acoustic impedance between the dune base and the underlying formation often results in amplification of seismic waves that are recorded at stations located on the surface of sand dunes. Attempts to address the issue using conventional surface-consistent amplitude scaling methods without reducing these amplification effects generally fail, thus compromising the suitability of the processed data for amplitude versus offset analysis. In this study, we propose a new reference site technique to reduce the effects of sand dune amplification, enabling the production of data sets that are suitable for amplitude versus offset processing. The proposed technique uses a deterministic approach to derive surface-consistent, frequency-dependent de-amplification functions for shots and stations located on the dunes only. Two-dimensional synthetic and field data examples show that the technique significantly reduces the effects of sand dune amplification.     

The Madinah eruption,Saudi Arabia: Magma mixing and simultaneous extrusion of three basaltic chemical types

During a 52-day eruption in 1256 A.D., 0.5 km³ of alkali-olivine basalt was extruded from a 2.25-km-long fissure at the north end of the Harrat Rahat lava field, Saudi Arabia. The eruption produced 6 scoria cones and a lava flow 23 km long that approached the ancient and holy city of Madinah to within 8 km. Three chemical types of basalt are defined by data point clusters on variation diagrams, i.e. the low-K, high-K, and hybrid types. All three erupted simultaneously. Their distribution is delineated in both scoria cones and lava flow units from detailed mapping and a petrochemical study of 135 samples. Six flow units, defined by distinct flow fronts, represent extrusive pulses. The high-K type erupted during all six pulses, the low-K type during the first three, and the hybrid type during the first two.Three mineral assemblages occur out of equilibrium in all three chemical types.Assemblage 1 contains resorbed olivine and clinopyroxene megacrysts and ultramafic microxenoliths (Fo₉₀ + Cr spinel + Cr endiopside) which fractionated within the spinel zone of the mantle.Assemblage 2 contains resorbed plagioclase megacrysts (An₆₀) with olivine inclusions (Fo₇₈) which fractionated in the crust.Assemblage 3 contains microphenocrysts of plagioclase and olivine in a groundmass of the same minerals with late-crystallizing titansalite and titanomagnetite; assemblage 3 crystallized at the surface and/or in the upper crust. Each assemblage represents a distinct range in PTX environment, suggesting that their coexistence in each chemical type may be a function of magma mixing. Such a process is confirmed by variable ratios of incompatible element pairs in a range of analyses.All three chemical types are products of mixing. Some of the hybrid types may have developed from surface mixing of the low-K and high-K lavas; however, the occurrence of all three types at the vent system suggests that subsurface mixing was the dominant process. We suggest that the Madinah flow was extruded from a heterogeneous magma chamber containing vertically stacked sections equivalent to the six eruptive pulses. This chamber may have developed contemporaneously with magma mixing when a crustal reservoir containing a magma in equilibrium with assemblage 2 was invaded by a more primitive magma containing cognate microxenoliths and megacrysts of assemblage 1.