Thickness of the lithosphere beneath Precambrian cratons and mechanisms of their neotectonic crustal uplift

Up to 70% of the area of continents is occupied by the Precambrian crust. Shortening of this crust finished 0.5 Ga ago or earlier, while Pliocene–Quaternary rises made up of 100–200 to 1000–1500 m. In order to support these uplifts in the absence of shortening, the density in the lithosphere layer had to be considerably decreased. This lower density can be attributed to the replacement of the lower part of the mantle lithosphere with asthenospheric material or to the expansion of the inner parts of the crust resulting from repeated metamorphism. As is shown by our calculations, a decrease in density at depths of 150–250 km beneath the Precambrian cratons can lead to uplifts only up to 100 m in amplitude. Hence, the neotectonic uplifts were caused by expansion at higher crustal levels. This situation required the supply of a large amount of mantle fluid into the crust, and the volume of this fluid should be comparable to that of the new-formed relief     

Geochemistry of the Cenozoic Potassic Volcanic Rocks in the West Kunlun Mountains and Constraints on Their Sources

The geochemical characteristics of the Cenozoic volcanic rocks from the north Pulu, east Pulu and Dahongliutan regions in the west Kunlun Mountains are somewhat similar as a whole. However, the volcanic rocks from the Dahongliutan region in the south belt are geochemically distinguished from those in the Pulu region (including the north and east Pulu) of the north belt. The volcanic rocks of the Dahongliutan region are characterized by relatively low TiO2 abundance, but more enrichment in alkali, much more enrichment in light rare earth elements and large ion lithosphile elements than those from the Pulu region. Compared with the Pulu region, volcanic rocks from the Dahongliutan region have relatively low 87Sr/86Sr ratios, and high εNd, 207Pb/204Pb and 208Pb/204Pb. Their trace elements and isotopic data suggest that they were derived from lithospheric mantle, consisting of biotite- and hornblende-bearing garnet lherzolite, which had undertaken metasomatism and enrichment. On the primitive mantle-normali     

中国岩石圈的基本特征

中国及邻区岩石圈结构构造十分复杂,并具有若干明显的特点:中国大陆地壳西厚东薄、南厚北薄,青藏高原地壳平均厚度为60~65 km,最厚达80 km;东部地区一般为30~35 km,南中国海中央海盆平均只有5 km;中国大陆地壳平均厚度为476 km,大大超过全球地壳392 km的平均厚度。中国大陆及邻区岩石圈亦呈西厚东薄、南厚北薄的变化趋势,青藏高原及西北地区岩石圈平均厚度为165 km,塔里木盆地中东部、帕米尔与昌都地区岩石圈厚度可达180~200 km。大兴安岭-太行山-武陵山以东,包括边缘海为岩石圈减薄区,厚度为50~85 km。西部岩石圈、软流圈“层状结构”明显,反映了板块碰撞汇聚的动力学环境;东部岩石圈、软流圈呈“块状镶嵌结构”,岩石圈薄,软流圈厚,反映了地壳拉张、软流圈物质上涌的特点,并在东亚及西太平洋地区85~250 km深处形成一巨型低速异常体。中国东部上、下地壳及地壳、岩石圈地幔之间普遍存在“上老下新”年龄结构。     

http://www.sciencedirect.com/science/article/pii/S1674987110000071

<正>The lithospheric structure of China and its adjacent area is very complex and is marked by several prominent characteristics.Firstly,China's continental crust is thick in the west but thins to the east,and thick in the south but thins to the north.Secondly,the continental crust of the Qinghai—Tibet Plateau has an average thickness of 60—65 km with a maximum thickness of 80 km,whereas in eastern China the average thickness is 30—35 km,with a minimum thickness of only 5 km in the center of the South China Sea.The average thickness of continental crust in China is 47.6 km,which greatly exceeds the global average thickness of 39.2 km.Thirdly,as with the crust,the lithosphere of China and its adjacent areas shows a general pattern of thicker in the west and south,and thinner in the east and north.The lithosphere of the Qinghai—Tibet Plateau and northwestern China has an average thickness of 165 km, with a maximum thickness of 180—200 km in the central and eastern parts of the Tarim Basin,Pamir, and Changdu areas.In contrast,the vast areas to the east of the Da Hinggan Ling—Taihang—Wuling Mountains,including the marginal seas,are characterized by lithospheric thicknesses of only 50—85 km.Fourthly,in western China the lithosphere and asthenosphere behave as a "layered structure", reflecting their dynamic background of plate collision and convergence.The lithosphere and asthenosphere in eastern China display a "block mosaic structure",where the lithosphere is thin and the asthenosphere is very thick,a pattern reflecting the consequences of crustal extension and an upsurge of asthenospheric materials.The latter is responsible for a huge low velocity anomaly at a depth of 85—250 km beneath East Asia and the western Pacific Ocean.Finally,in China there is an age structure of "older in the upper layers and younger in the lower layers" between both the upper and lower crusts and between the crust and the lithospheric mantle.     

Recent mountain building of the central Alpine-Himalayan Belt

From the end of the Eocene through the Pliocene, the Alpine-Himalayan Belt underwent collisional shortening induced by convergence of the Gondwana plates with the Eurasian Plate and varied in orientation from the north-northwestern to the northeastern directions. The collisional shortening was expressed in folding, thrusting of continental crustal tectonic sheets over one another, and closure of the residual basins of Neotethys and its backarc seas; it resulted in local thickening of the crust and its isostatic uplifting. As a rule, the uplifts were not higher than ∼1.5 km. In other words, before the Pliocene, the growth of local mountain edifices was caused by collisional shortening of the belt. Isostatic uplifting of the thickened crust was continued in the Pliocene and Quaternary even more intensely than before, but the general rise of the mountain systems was superposed on this process. The rise substantially exceeded in amplitude the contribution of the uplift caused by shortening and did not depend on the preceding Cenozoic history of either territory. Not only the mountain ridges but also most adjacent basins were involved in rising, which eventually led to the contemporary mountain topography of the belt. The spread of the hot and fluidenriched asthenosphere of the closed Tethys beneath the orogenic belt could have been a cause of such additional rising. The uplift was an isostatic reaction to decompaction of the lithospheric mantle partly replaced with asthenosphere and of the lower crust subject to retrograde metamorphism under the effect of cooled asthenospheric fluids. The deep transformations are also probably responsible for deepening of some basins in the Pliocene-Quaternary and more contrasting transverse segmentation of the belt.     

Progress in the Study of Deep Profiles of Tibet and the Himalayas (INDEPTH)

This paper introduces 8 major discoveries and new understandings with regard to the deep structure and tectonics of the Himalayas and Tibetan Plateau obtained in Project INDEPTH, They are mainly as follows. (1) The upper crust, lower crust and mantle lithosphere beneath the blocks of the plateau form a "sandwich" structure with a relatively rigid-brittle upper crust, a visco-plastic lower crust and a relatively rigid-ductile mantle lithosphere. This structure is completely different from that of monotonous, cold and more rigid oceanic plates. (2) In the process of north-directed collision-compression of the Indian subcontinent, the upper crust was attached to the foreland in the form of a gigantic foreland accretionary wedge. The interior of the accretionary wedge thickened in such tectonic manners as large-scale thrusting, backthrusting and folding, and magmatic masses and partially molten masses participated in the crustal thickening. Between the upper crust and lower crust lies a large detachment (e.g     

Major Miocene geological events in southern Tibet and eastern Asia induced by the subduction of the Ninetyeast Ridge

Cenozoic adakitic rocks in the Gangdese changed from barren continental melts to ore-forming slab melts at ~ 23 Ma. The distribution and chemical characteristics of the ore-forming adakites point to an association with the Ninetyeast Ridge. The subduction of the thick, rigid Ninetyeast Ridge changed the geometry and rheology of the eastern Tibetan Plateau lithosphere and asthenosphere, restrained the eastward escape of asthenospheric mantle as well as continental fragments, and promoted the uplift and building of the Tibetan Plateau, which consequently changed the tectonic and climatic regimes in eastern Asia.     

西藏及其周围地区地壳、地幔地震层析成像——印度板块大规模俯冲于西藏高原之下的证据

文中介绍有关西藏—喜马拉雅碰撞带的一项地震层析成像研究。根据一个用天然地震数据产生的全球波速模型 ,印度板块有可能以近水平状俯冲于整个西藏高原之下至 16 5～ 2 6 0km深度。西藏岩石圈具有低波速地壳和高波速下岩石圈 (75～ 12 0km深 )。在 12 0～ 16 5km深度范围 ,西藏岩石圈与俯冲的印度板块之间有一层低速软流圈物质。高原中部从地表到 310km深处有一低速体 ,说明地幔物质有可能穿过俯冲板块的脆弱部位上隆。这些结果以及野外实测的地壳缩短值说明高原的抬升得助于印度板块的近水平俯冲。我们推论俯冲印度板块的升温上浮以及上覆软流层的存在是造成西藏高原高海拔抬升以及内部地表仍相对平坦的主要原因。2 0 0 1年 1月 2 6日在印度西部发生的毁灭性大地震有可能是俯冲应力在印度板块后缘薄弱处引发的岩石圈大断裂。     

Evolution of the central Alpine-Himalayan belt in the Late Cenozoic

The Late Cenozoic geodynamics of the Alpine-Himalayan belt comprised the collision between continental-lithosphere plates and blocks and the effect of the Neo-Tethyan active residual asthenosphere, which reached the northern margin of the belt after the ocean had closed. From the late Eocene to the early Pliocene, strong deformation, lateral migrations of flaked plates, metamorphism, and magmatism (they all consolidated the crust) took place in the lithosphere with the participation of mobile asthenospheric components. In the Pliocene–Quaternary, the asthenosphere beneath the consolidated crust partly replaced the dense mantle lithosphere with remaining paleoocean mafic rocks, which subducted into the mantle. Phase transformations and deformations in the subducting metamafic slabs caused mantle earthquakes. The less compact metamafic rocks experienced metamorphic weakening under the effect of the asthenosphere and incorporated into the Earth’s crust. The upper-mantle and lower-crust weakening led to a drastic intensification of uplifting and the formation of mountain ranges. Recent volcanism is also attributed to the activity of the Neo-Tethyan asthenosphere.     

Lithospheric structure and crust–mantle decoupling in the southeast edge of the Tibetan Plateau

Convergence between the Indian plate and the Eurasian plate has resulted in the uplift of the Tibetan Plateau, and understanding the associated dynamical processes requires investigation of the structures of the crust and the lithosphere of the Tibetan Plateau. Yunnan is located in the southwest edge of the plateau and adjacent to Myanmar to the west. Previous observations have confirmed that there is a sharp transition in mantle anisotropy in this area, as well as clockwise rotations of the surface velocity, surface strain, and fault orientation. We use S receiver functions from 54 permanent broad-band stations to investigate the structures of the crust and the lithosphere beneath Yunnan. The depth of the Moho is found to range from 36 to 40 km beneath southern Yunnan and from 55 to 60 km beneath northwestern Yunnan, with a dramatic variation across latitude 25–26°N. The depth of the lithosphere–asthenosphere boundary (LAB) ranges from 180 km to less than 70 km, also varying abruptly across latitude 25–26°N, which is consistent with the sudden change of the fast S-wave direction (from NW–SE to E–W across 26–28°N). In the north of the transition belt, the lithosphere is driven by asthenospheric flow from Tibet, and the crust and the upper mantle are mechanically coupled and moving southward. Because the northeastward movement of the crust in the Burma micro-plate is absorbed by the right-lateral Sagaing Fault, the crust in Yunnan keeps the original southward movement. However, in the south of the transition belt, the northeastward mantle flow from Myanmar and the southward mantle flow from Tibet interact and evolve into an eastward flow (by momentum conservation) as shown by the structure of the LAB. This resulting mantle flow has a direction different from that of the crustal movement. It is concluded that the Sagaing Fault causes the west boundary condition of the crust to be different from that of the lithospheric mantle, thus leading to crust–mantle decoupling in Yunnan.     

The Southern Urals. Decoupled evolution of the thrust belt and its foreland: a consequence of metamorphism and lithospheric weakening

An analysis is presented of the mechanisms of tectonic evolution of the southern part of the Urals between 48N and 60N in the Carboniferous–Triassic. A low tectonic activity was typical of the area in the Early Carboniferous — after closure of the Uralian ocean in the Late Devonian. A nappe, ≥10–15 km thick, overrode a shallow-water shelf on the margin of the East European platform in the early Late Carboniferous. It is commonly supposed that strong shortening and thickening of continental crust result in mountain building. However, no high mountains were formed, and the nappe surface reached the altitude of only ≤0.5 km. No high topography was formed after another collisional events at the end of the Late Carboniferous, in the second half of the Early Permian, and at the start of the Middle Triassic. A low magnitude of the crustal uplift in the regions of collision indicates a synchronous density increase from rapid metamorphism in mafic rocks in the lower crust. This required infiltration of volatiles from the asthenosphere as a catalyst. A layer of dense mafic rocks, 20 km thick, still exists at the base of the Uralian crust. It maintains the crust, up to 60 km thick, at a mean altitude 0.5 km. The mountains, 1.5 km high, were formed in the Late Permian and Early Triassic when there was no collision. Their moderate height precluded asthenospheric upwelling to the base of the crust, which at that time was 65–70 km thick. The mountains could be formed due to delamination of the lower part of mantle root with blocks of dense eclogite and/or retrogression in a presence of fluids of eclogites in the lower crust into less dense facies.

The formation of foreland basins is commonly attributed to deflection of the elastic lithosphere under surface and subsurface loads in thrust belts. Most of tectonic subsidence on the Uralian foreland occurred in a form of short impulses, a few million years long each. They took place at the beginning and at the end of the Late Carboniferous, and in the Late Permian. Rapid crustal subsidence occurred when there was no collision in the Urals. Furthermore, the basin deepened away from thrust belt. These features preclude deflection of the elastic lithosphere as a subsidence mechanism. To ensure the subsidence, a rapid density increase was necessary. It took place due to metamorphism in the lower crust under infiltration of volatiles.

The absence of flexural reaction on the Uralian foreland on collision in thrust belt together with narrow-wavelength basement deformations under the nappe indicate a high degree of weakening of the lithosphere. Such deformations took also place on the Uralian foreland at the epochs of rapid subsidences when there was no collision in thrust belt. Weakening of the lithosphere can be explained by infiltration of volatiles into this layer from the asthenosphere and rapid metamorphism in the mafic lower crust. Lithospheric weakening allowed the formation of the Uralian thrust belt under convergent motions of the plates which were separated by weak areas.     

Recent crustal uplift of Precambrian cratons: Key patterns and possible mechanisms

Precambrian cratons cover about 70% of the total continental area. According to a large volume of geomorphological, geological, paleontological, and other data for the Pliocene and Pleistocene, these cratons have experienced a crustal uplift from 100-200 m to 1000-1500 m, commonly called the recent or Neotectonic uplift. Shortening of the Precambrian crust terminated half a billion years ago or earlier, and its uplift could not have been produced by this mechanism. According to the main models of dynamic topography in the mantle, the distribution of displacements at the surface is quite different from that of the Neotectonic movements. According to seismic data, there is no magmatic underplating beneath most of the Precambrian cratons. In most of cratonic areas, the mantle lithosphere is very thick, which makes its recent delamination unlikely. Asthenospheric replacement of the lower part of the mantle lithosphere beneath the Precambrian cratons might have produced only a minor part of their Neotectonic uplifts. Since the above mechanisms cannot explain this phenomenon, the rock expansion in the crustal layer is supposed to be the main cause of the recent uplift of Precambrian cratons. This is supported by the strong lateral nonuniformity of the uplift, which indicates that expansion of rocks took place at a shallow depth. Expansion might have occurred in crustal rocks that emerged from the lower crust into the middle crust with lower pressure and temperature after the denudation of a thick layer of surface rocks. In the dry state, these rocks can remain metastable for a long time. However, rapid metamorphism accompanied by expansion of rocks can be caused by infiltration of hydrous fluids from the mantle. Analysis of phase diagrams for common crustal rocks demonstrates that this mechanism can explain the recent crustal uplift of Precambrian cratons.     

玄武岩浆起源和演化的一些基本概念以及对中国东部中-新生代基性火山岩成因的新思路

以全球大地构造为背景讨论了玄武岩浆起源和演化的一些基本概念.这些概念的正确理解有助于合理解释各种环境中火成岩的形成机制,也有助于依据野外岩石组合来判别古构造环境.在此基础上结合已有资料和观察,对中国东部中生代岩石圈减薄及中-新生代基性火山岩成因提出了一些新解释.这些解释与地质观察相吻合,且符合基本的物理学原理.虽然中国东部基性火山活动可称为"板内"火山活动,但它实际上是板块构造的特殊产物.中国东部中生代岩石圈减薄是其下部被改造为软流层的缘故.这种改造是加水"软化"所致.水则源于中国东部地幔过渡带(410～660 km)内古太平洋(或其前身)俯冲板块脱水作用.其将岩石圈底部改造为软流层的过程,实际上就是岩石圈减薄的过程.因为软流层是地幔对流的重要部分,而大陆岩石圈则不直接参与地幔对流.中生代玄武岩具有εNd＜0的特征,说明其源于新近改造而成的软流层,亦即原古老岩石圈之底部.中国大陆北北东-南南西向的海拔梯度突变界线与东-西部重力异常,陆壳厚度变化,以及地幔地震波速变化梯度吻合.因此可将北北东-南南西向梯度线称为"东-西梯度界".该界东-西海拔高差(西部高原与东部丘陵平原),陆壳厚度差异(西部厚而东部薄)和100～150 km的深度范围地幔地震波速差异(西部快而东部慢),均受控于上地幔重力均衡原理.这表明西部高原岩石圈厚度＞150～200 km,而东部丘陵平原岩石圈厚度＜80km."遥远"的西太平洋俯冲带具有自然的地幔楔吸引作用.此吸引作用可引起中国东部"新生"软流层东流.软流层东流必将引起西部高原底部软流层的东向补给(流动).这一过程必然导致东移软流层的减压,即从西部的深源(岩石圈深度＞150～200 km处)到东部的浅源(岩石圈深度～80km处).东移软流层的减压分熔可合理解释具有软流圈地球化学特征(εNd＞0)的新生代中国东部基性火山活动及玄武岩的成因.这些对中国东部中-新生代地质过程的解释,将为更加细致的,以岩石学和地球化学为主的讨论所验证.     

Geochronology and Hf–Fe isotopic geochemistry of the Phanerozoic mafic–ultramafic intrusions in the Damiao area,northern North China Craton: Implications for lithospheric destruction

Timing and source of several Fe-mineralized mafic-ultramaficintrusions in the Damiao area are investigated here by coupling new geochronological and Hf–Fe isotopic data with previous results. Although regarded as a Late Paleoproterozoic assemblage previously, two ～140 Ma intrusions are recognized by zircon U–Pb dating, indicating emplacement of these intrusions from Middle Devonian to Early Cretaceous times. Both Hf and Fe isotopic features lead to the conclusion that distinct mantle components contributed to their magma generation. As the first magmatic phase, the ～395 Ma intrusions were mainly derived from the slightly-enriched SCLM that was prevalent during the Paleozoic. However, asthenospheric material was strongly involved in the formation of the ～215 Ma Gaositai intrusion. Therefore, the initiation of lithospheric destruction in the northern NCC is inferred to have occurred in Late Triassic time, triggered by post-orogenic extension following the ～250 Ma collision between the Siberian Craton and the NCC. The ～140 Ma intrusions originated from a significantly-enriched mantle component probably resided in the predominant slightly-enriched SCLM. This mantle source would have melted in the Late Mesozoic, when the thin lithosphere enabled enhanced heat transfer from the asthenosphere. In summary, these distinct mantle sources of mafic–ultramafic magmatism provide a record of mantle heterogeneity and the gradual upward migration of the lithosphere–asthenosphere boundary during lithospheric destruction.     

Petrogenesis of continental mafic dykes from the Izera Complex, Karkonosze-Izera Block (West Sudetes, SW Poland)

The Izera Complex (West Sudetes) contains widespread bodies of metagabbro, metadolerite and amphibolite (the Izera metabasites), and less abundant dykes of weakly altered dolerites, emplaced in a continental setting. The primary magmas of the Izera metabasites were probably formed through adiabatic decompression melting of upwelling asthenosphere (mantle plume) that was associated with the early Palaeozoic fragmentation of Gondwana (initial rift). The rocks are mildly alkaline, transitional-to-tholeiitic basalts and have OIB-like trace element patterns. Trace element modelling reveals that the mafic magmas were generated by variable degrees of partial melting (1–7%) of fertile, garnet-bearing asthenospheric source similar in composition to primitive mantle. Together with an increase in degree of partial melting, the compositional affinity of the magmas and the depth of segregation changed progressively from ca. 70–90 km (mildly alkaline magmas of the metadolerites and amphibolites) to ca. 60–75 km (transitional-to-tholeiitic magmas of the metagabbros). The systematics of incompatible versus compatible element distribution, and major and trace element modelling, indicate that some rocks experienced low-pressure (<5 kbar) differentiation resulting in up to 50% fractionation of clinopyroxene, olivine and minor plagioclase and ilmenite. The genetically distinct weakly altered dolerites are basaltic andesite in composition and possibly related to late- or post-orogenic events in the Karkonosze-Izera Block. These rocks are calc-alkaline, with relatively flat MREE–HREE patterns, enrichment in LREE and other highly incompatible elements relative to primitive mantle, and negative Nb–Ta, Ti, P anomalies. The geochemical features and geochemical modelling, indicate that their primary magmas segregated at depths ≤70 km and were produced by ~2% melting of a metasomatized sublithospheric mantle source presumably containing small amounts of hydrated phases. Although the present study is inconclusive as to the origin of the metasomatic component in the source (? slab-derived fluid/melts, OIB-like alkaline melt percolation of subcontinental lithosphere), the genesis of the Izera basaltic andesites is seemingly related to upwelling of asthenosphere and heat flow triggered by a postulated decoupling of the mantle lithosphere and post-collisional extensional collapse and uplift in the Karkonosze-Izera Block.     

High-T, low-P metamorphism in the Palaeoproterozoic Halls Creek Orogen, northern Australia: the middle crustal response to a mantle-related transient thermal pulse

High‐T, low‐P metamorphic rocks of the Palaeoproterozoic central Halls Creek Orogen in northern Australia are characterised by low radiogenic heat production, high upper crustal thermal gradients (locally exceeding 40 °C km^?1) sustained for over 30 Myr, and a large number of layered mafic‐ultramafic intrusions with mantle‐related geochemical signatures. In order to account for this combination of geological and thermal characteristics, we model the middle crustal response to a transient mantle‐related heat pulse resulting from a temporary reduction in the thickness of the mantle lithosphere. This mechanism has the potential to raise mid‐crustal temperatures by 150–400 °C within 10–20 Myr following initiation of the mantle temperature anomaly, via conductive dissipation through the crust. The magnitude and timing of maximum temperatures attained depend strongly on the proximity, duration and lateral extent of the thermal anomaly in the mantle lithosphere, and decrease sharply in response to anomalies that are seated deeper than 50–60 km, maintained for <5 Myr in duration and/or have half‐widths <100 km. Maximum temperatures are also intimately linked to the thermal properties of the model crust, primarily due to their influence on the steady‐state (background) thermal gradient. The amplitudes of temperature increases in the crust are principally a function of depth, and are broadly independent of crustal thermal parameters. Mid‐crustal felsic and mafic plutonism is a predictable consequence of perturbed thermal regimes in the mantle and the lowermost crust, and the advection of voluminous magmas has the potential to raise temperatures in the middle crust very quickly. Although pluton‐related thermal signatures significantly dissipate within <10 Myr (even for very large, high‐temperature intrusive bodies), the interaction of pluton‐ and mantle‐related thermal effects has the potential to maintain host rock temperatures in excess of 400–450 °C for up to 30 Myr in some parts of the mid‐crust. The numerical models presented here support the notion that transient mantle‐related heat sources have the capacity to contribute significantly to the thermal budget of metamorphism in high‐T, low‐P metamorphic belts, especially in those characterised by low surface heat flow, very high peak metamorphic geothermal gradients and abundant mafic intrusions.     

On subducting slab entrainment of buoyant asthenosphere

Laboratory and numerical experiments and boundary layer analysis of the entrainment of buoyant asthenosphere by subducting oceanic lithosphere implies that slab entrainment is likely to be relatively inefficient at removing a buoyant and lower viscosity asthenosphere layer. Asthenosphere would instead be mostly removed by accretion into and eventual subduction of the overlying oceanic lithosphere. The lower (hot) side of a subducting slab entrains by the formation of a ∼10–30 km‐thick downdragged layer, whose thickness depends upon the subduction rate and the density contrast and viscosity of the asthenosphere, while the upper (cold) side of the slab may entrain as much by thermal ‘freezing’ onto the slab as by mechanical downdragging. This analysis also implies that proper treatment of slab entrainment in future numerical mantle flow experiments will require the resolution of ∼10–30 km‐thick entrainment boundary layers.     

中国东部壳-幔、岩石圈-软流圈之间的相互作用带：特征及转换时限

中国东部中—新生代,下部岩石圈存在壳与幔、岩石圈与软流圈两个相互作用带,它们是重要的岩浆源区,在层圈相互作用中,热和物质的交换及其动力学过程是引起中、新生代岩石圈内部层圈间的厚度调整、岩石圈不均匀减薄以及区域构造-岩浆-成矿作用的重要机理。大陆内部的壳-幔作用有3种类型:地幔来源的底侵熔体与下地壳的作用;下地壳拆沉进入弱化(weakening)了的岩石圈地幔二者发生的作用以及陆-陆碰撞深俯冲带的壳-幔相互作用。它们形成的火山岩组合有一定的差别,但源区都含有地壳组分。岩石圈-软流圈的作用带也是重要的岩浆源区,源区是以软流圈地幔为主,基本不含地壳组分。东部岩石圈的减薄时间大体与出现大规模软流圈来源的玄武岩喷发的时间一致,也与上述两类层圈作用转换的时间一致,大约在100Ma以后。     

Deep structure of Kamchatka according to the results of MT sounding and seismic tomography

The key features in the distribution of geoelectric and velocity heterogeneities in the Earth’s crust and the upper mantle of Kamchatka are considered according to the data of deep magnetotelluric sounding and seismotomography. Their possible origin is discussed based on the combined analysis of electric conductivity and seismic velocity anomalies. The geoelectric model contains a crustal conducting layer at a depth of 15–35 km extending along the middle part of Kamchatka. In the Central Kamchatka volcanic belt, the layer is close to the ground surface to a depth of 15–20 km, where its conductivity considerably increases. Horizontal conducting zones with a width of up to 50 km extending into the Pacific Ocean are revealed in the lithosphere of eastern Kamchatka. The large centers of current volcanism are confined to the projections of the horizontal zones. The upper mantle contains an asthenospheric conducting layer that rises from a depth of 150 km in western Kamchatka to a depth of 70–80 km beneath the zone of current volcanism. According to the seismotographic data, the low- and high-seismic-velocity anomalies of P-waves that reflect lateral stratification, which includes the crust, the rigid part of the upper mantle, the asthenospheric layer in a depth range of ~70–130 km, and a high-velocity layer confined to a seismofocal zone, are identified on the vertical and horizontal cross sections of eastern Kamchatka. The cross sections show low-velocity anomalies, which, in the majority of cases, correspond to the high-conductivity anomalies caused by the increased porosity of rocks saturated with liquid fluids. However, there are also differences that are related to the electric conductivity of rocks depending on pore channels filled with liquid fluids making throughways for electric current. The seismic velocity depends, to a great extent, on the total porosity of the rocks, which also includes isolated and dead-end channels that can be filled with liquid fluids that do not contribute to the electric-current transfer. The data on electric conductivity and seismic velocity are used to estimate the porosity of the rocks in the anomalous zones of the Earth’s crust and the upper mantle that are characterized by high electric conductivity and low seismic velocity. This estimate serves as the basis for identifying the zones of partial melting in the lithosphere and the asthenosphere feeding the active volcanoes.     

长江中下游成矿带及典型矿集区深部结构探测——SinoProbe-03年度进展综述

大陆现今的地壳结构和物质组成是地壳经历了复杂的动力学演化过程形成的"产品",保留着演化过程中重大地质事件留下的痕迹,使用现代地球物理探测技术对这个"产品"进行成像,不仅可以了解现今的构造和物质状态,还可以推演过去曾经发生的动力学过程.长江中下游成矿带是我国重要的铁、铜多金属资源基地,其形成的深部动力学过程一直是矿床学家...