Aftershocks of 26th january 2001 Bhuj earthquake and seismotectonics of the Kutch region

The 26th January 2001 Bhuj earthquake was followed by intense aftershock activity. Aftershock data from United States Geological Survey (USGS) utilized in this study encompasses three months period from 26th January to 26th April 2001. Epicenters of the aftershock are plotted on a map depicting active faults. All the aftershocks of magnitude > 5 and 70% of those ranging between magnitude 3 and 5 are confined to an area resembling a horseshoe pattern with a pointed end towards NE. The other 20% of magnitude 3 to 5 are enclosed within an almost parallel boundary. Only 10% are found to be beyond this limiting boundary. 50% of the recorded after-shocks took place within the first week of the main event and this study reveals that the basic characteristic pattern of aftershock activity can be determined on the basis of the data of only one week. Four major NW-SE trending active faults are mapped in the Kutch region. They define the western limit of Cambay structure and also mark the western limit of Dharangadhra and Wadhwan basins along the SE continuation in Saurashtra. These faults separate the Kutch region into two geologically different blocks. On the SW side the mapped horseshoe pattern gets characteristically truncated along the western most fault, which is characterized by a strike-slip movement in the south and vertical movement in the north. The present study has revealed that the epicenter of the 26th January earthquake is located in the vicinity of the Bhachau township, close to the intersection with the Kutch mainland fault. Furthermore, it has been noticed that most of the epicenters of the aftershock are confined in the intersectional area of the Kutch mainland fault and the NW-SE faults.     

断层旋性与地震危险性

文中以“平行同旋走滑断层减震”的观点论证了兰州、北京、昆明这些位于强震活动区的大城市今后百年内不会发生 6 .5级以上地震。以“平行异旋走滑断层加震”的观点解释了西南棱形块体北边界和南边界在发生大震方面相互促进的现象。对于由构造分段求震级来说 ,在遇到不同的横交断层作为分段点时 ,还需考虑将来发震时始破裂点的位置以及发震断层的旋性 ,不然就会造成对震级估计不足 ,继而成为抗震建设的潜在不安全因素。在主震后为了预报余震的强度 ,可应用物理学中的科里奥利力理论 ,应用时必须知道断层类型和旋性。对于走滑断层来说 ,左旋余震弱 ,右旋余震强。例如 1997年藏北玛尼 7.5级地震 ,余震仅为 5 .3级 ,震级偏小 ,因主震为左旋的缘故 ;1976年唐山 7.8级地震 ,余震可达 7.1级 ,因主震是右旋。对于逆断层来说 ,上盘错动方向在当地子午面左侧者余震强度大 ,在右侧者余震强度弱。据此讨论了 1999年台湾南投 7.6级大震余震强度达 7.1级是因为主震为逆断层 ,上盘向西错动。     

汶川地震的发生对周围断层稳定性影响的数值模拟

大地震发生后, 研究地震的发生对周围断层的影响尤为重要.利用川西-藏东地区三维粘弹性有限元模型,考虑地表高程和粘弹性松弛等因素的影响,研究主要断裂带库仑应力累积速率和汶川地震的发生对周围断层的影响.结果表明:(1)龙门山断裂带年累积速率为0.28×10-3~0.35×10-3 MPa/a,这种较小的累积速率与龙门山断裂带强震较长复发间隔一致;(2)汶川地震的发生除造成震源区应力减小外, 还造成断裂带北东段不同程度的应力增加, 这与震后余震的分布基本吻合;(3)鲜水河断裂北西段、东昆仑、龙日坝、岷江以及虎牙断裂库仑应力水平增加显著,且汶川地震对于玉树地震的发生有微弱的加载效应;(4)汶川地震的发生造成鲜水河断裂带强震复发间隔缩短约52~104 a,是值得关注的强震危险区.      

青藏高原东南缘活动断层相互作用、应力触发与差别响应

岩石圈、地壳由众多板块、地块及层圈组合而成,是开放性复杂巨系统,活断层在地壳中犹如神经网络也是复杂的开放体系。因此活断层之间存在复杂的相互作用,例如地震断层破裂产生应力扰动,可能触发其他断层破裂,不仅在近处,也会在远处发生。不同的活断层构造产状、活动方式及应变阶段不同,对同一次触发响应不同。触发与差别响应二者的叠加效应在地震活动性上有重要表现。表现之一是区域大震后,余震区外地震活动显著增强处发生继发性大震的概率最大,也即率先出现"远余震、诱发前震、响应震"的地方地震危险性增大,对预测未来地震位置有效。对本区1950—2013年地震统计表明,预测成功率W=1-漏报率-虚报率=80%。同时,对当前地震危险区作了预测。     

断层之间的相互作用及其地震地质意义

从断层间相互作用产生的同震库仑应力改变入手,提出了断层间相互作用的触震与缓震效应,探讨了断层间的相互作用对断层活动性、断层未来地震潜势及余震活动分布图像的影响.从断层间相互作用的角度分析了大陆强震准周期丛集复发行为的可能的物理机制.认为断层间的相互作用具有重大的地震地质意义,在进行断层活动习性和断层地震危险性定量评价及余震分布图像预测时,应该充分考虑断层间相互作用的影响.     

On the aftershock sequence of a 4.6 mb earthquake of the Garhwal Himalaya

Locally recorded data for eighteen aftershocks of a magnitude(m_b) 4.6 earthquake occurring near Ukhimath in the Garhwal Himalaya were analysed. A master event technique was adopted to locate seventeen individual aftershock hypocentres relative to the hypocentre of the eighteenth aftershock chosen as the master event. The aftershock epicentres define an approximately 30 km² rupture zone commensurate with the magnitude of the earthquake. The distribution of epicentres within this zone and the limited amount of first motion data support the view that a group of parallel, sub-vertical, sinistral strike-slip faults oriented N46°, transverse to the regional NW-SE trend of the Garhwal Himalaya, was involved in this seismic episode. Since the estimated focal depth range for aftershocks of this sequence is 3–14 km, we infer that this transverse fault zone extends through the upper crustal layer to a depth of 14 km at least.     

Crustal Motion Characteristics in the Eastern Margin of the Tibetan Plateau and Adjacent Regions after the Wenchuan Earthquake

The Wenchuan earthquake has altered the crustal motion characteristics in the eastern margin of the Tibetan Plateau and adjacent regions.Using discontinuous GPS survey data for 2008–2012, the velocity field for the Eurasia reference framework has been obtained, and the general trend of contemporary crustal motion after the occurrence of the Wenchuan earthquake has been studied.In addition, using the velocity field, the block movement velocity has been estimated by least-squares fitting.Furthermore, the properties and displacement rates of main faults have been obtained from the differences in velocity vectors of the blocks on both sides of the faults.The results reveal that there are no obvious changes in the general characteristics of crustal motion in this area after the Wenchuan earthquake.The earthquake mainly changed the rate of the movement of the Chuan-Qing block and caused variation in the movement direction of the South China block.The effect of the earthquake on faults is mainly reflected in variations in fault displacement velocity; there is no fundamental change in the properties of fault activity.The displacement rates of the Xianshuihe fault decreased by 3–4 mm/a, the Longmenshan fault increased by 9–10 mm/a, and the northern segment of the Anninghe fault increased by approximately 9 mm/a.Furthermore, the displacement rates of the Minjiang, Xueshan, Huya, Longquanshan, and Xinjin faults increased by 2–3 mm/a.This implies that the effects of the Wenchuan earthquake on crustal movement can mainly be observed in the Chuan-Qing, South China, and N-Chuan-Dian blocks and their internal faults, as well as the Xianshuihe and Longmenshan faults and the northern section of the Anninghe fault.The reason for this is that the Wenchuan earthquake disturbed the kinematic and dynamic balance in the region.     

2021年5月21日漾濞MS6.4地震的发震断层及其破裂特征: 地震序列的重定位分析结果

据中国地震台网测定，2021年5月21日21时48分在云南省大理州漾濞县发生M_S6.4地震，及时查明此次地震的发震构造及震源破裂特征，可为认识该区孕震条件和判别未来强震危险性提供关键依据。采用双差定位方法对漾濞地震序列进行重新定位，得到3863次地震事件的精确震源位置。结果显示:漾濞地震序列整体呈北西—南东向分布，长约25 km；整体走向135°；M_S6.4主震震中位置为25.688°N，99.877°E；震源深度约9.6 km。综合地震序列深度剖面和震源机制解结果可知，发震断层应为北西走向、整体向西南方向陡倾的右旋走滑断层，倾角具有自北西向南东逐渐变缓的趋势。进一步分析地震序列的时空演化过程发现，该地震具有典型的"前震-主震-余震型"地震序列活动特点，其破裂过程主要包括3个阶段。破裂成核阶段:首先在发震断层10~12 km深度处相对脆弱部位产生小尺度破裂，之后失稳加速破裂，发生M_S5.6地震；主震破裂阶段:在构造应力场持续加载和周围小尺度破裂的共同影响下，促使浅部较高强度断层闭锁区破裂，形成M_S6.4主震；尾端拉张破裂阶段:主震破裂向东南扩展过程中，在东南端形成与之呈马尾状斜交的、具有正断性质的次级破裂，并产生M_S5.2余震。而且此次地震还在源区北东侧触发了北北东向的左旋走滑破裂。综合分析认为，漾濞地震是兰坪-思茅地块内部北西向草坪断裂在近南北向区域应力挤压作用下发生右旋走滑运动的结果，具有明显的新生断裂特征。近年来兰坪-思茅地块内部一系列中强地震的发生表明，青藏高原物质向东南持续挤出的过程中，遇到该地块的阻挡，正在导致地块内部早期断层贯通形成新的活动断裂。因此，川滇地块西南边界带上或相邻地块内部老断层的复活和新生断裂的产生是区域中强地震危险性分析评价中值得关注的重要课题，同时建议需重视未来该区中强地震进一步向东南和向北的迁移或扩展的可能性。      

基于实验结果讨论断层破裂与强震物理过程的若干问题

基于断层摩擦滑动实验、含凹凸体断层的变形破坏实验、断层撕裂扩展的实验、交叉断层的变形实验等多种实验结果并结合前人的工作 ,讨论了与断层破裂与强震物理过程相关的若干问题。研究表明 ,断层的整体滑动引起其两侧块体弹性应变的释放 ,是强震发生的原因 ,因此构造活动区具有较大尺度、结构连续且简单、介质均匀的断层 (或断层段 )是产生强震必备的构造条件 ,深部新生断层(盲断层 )向上撕裂扩展产生强震 ,尚需“弱层”提供“解耦”条件以便断层发生整体滑动。强震孕育过程中包含着凹凸体的破裂 ,断层面上凹凸体的尺度、强度及数量决定着前震活动的特征、强震动态破裂过程以及前兆现象。由断层分割的块体通过边界断层的交替滑动、以“框动”的方式运动 ,因此块体周边的断层上强震活动具有交替性。     

Evidence for surface rupture associated with the Mw 6.3 L'Aquila earthquake sequence of April 2009 (central Italy)

An earthquake of Mw = 6.3 struck L'Aquila town (central Italy) on 6 April 2009 rupturing an ∼18-km-long SW-dipping normal fault. The aftershock area extended for a length of more than 35 km and included major aftershocks on 7 and 9 April and thousands of minor events. Surface faulting occurred along the SW-dipping Paganica fault with a continuous extent of ∼2.5 km. Ruptures consist of open cracks and vertical dislocations or warps (0.1m maximum throw) with an orientation of N130°–140°. Small triggered slip and shaking effects also took place along nearby synthetic and antithetic normal faults. The observed limited extent and small surface displacement of the Paganica ruptures with respect to the height of the fault scarps and vertical throws of palaeo-earthquakes along faults in the area put the faulting associated with the L'Aquila earthquake in perspective with respect to the maximum expected magnitude and the regional seismic hazard.     

滇西南2014年景谷中-强震群的地质构造成因——茶房-普文断裂带贯通过程的构造响应

2014年10—12月期间,云南景谷接连发生了Ms6.6、Ms5.8、Ms5.9三次中-强地震。为确定地震的地质构造成因,在地表调查的基础上,综合该区的地质构造情况、烈度与余震分布、震源机制解等资料,确定此次震群活动的宏观震中位于永平盆地东南侧山地,发震断层为地质与地貌表现不显著的NW向右旋走滑断层。此次震群活动及余震迁移过程指示,由于断层斜接部位岩桥的临时阻碍,Ms6.6地震破裂在向南东扩展过程中发生短暂停滞,突破障碍后进一步引发了Ms5.8和Ms5.9地震,这符合震源破裂沿NW向发震断裂分段破裂的行为。区域活动断裂的遥感解译结果发现,发震断层位置恰好处于NW向右旋走滑的茶房断裂与普文断裂之间,区域上属于该断裂带的不连贯部位,指示此次中-强震群活动应该是茶房-普文断裂带贯通过程的构造活动表现。结合思茅地块的历史地震资料发现,思茅地块地震活动多以小于等于6.8级为主,发震构造多为NW向断裂。指示在现今构造应力场作用下,该区NW向断裂的活动性相对NE向断裂更加显著,属于该区主要控震构造,应在今后的地震地质工作中给予更多关注。     

Analytic models for orogenic collapse

The temporal and spatial distribution of the aftershock sequences of the Ruwenzori (February 5, 1994, Mb (5.8)), Masisi (April 29, 1995, Mb (5.1)) and Kalehe (October 24, 2002, Mb (5.9)) earthquakes have been studied. It has been found that most of the aftershocks of the Ruwenzori earthquake are located on the eastern flank of the main escarpment and those of the Masisi earthquake are confined to the northwest of Lake Kivu margin where earthquake occurrence of swarm-type was normally observed. The Kalehe earthquake occurred in the central part of Lake Kivu and it was the largest earthquake observed in the Lake Kivu basin since 1900. The rate of decrease in aftershock activity with the time has shown that the p-value for Ruwenzori and Masisi earthquake equals 0.6, somehow smaller than that found in other geotectonic zones where p is close to 1. The p-value of the Kalehe earthquake is a normal value equal to 1.From an area delimited by spatial distribution of aftershocks, the linear dimension of the fault was estimated. The fault area determined in this study correlates well with those of previous studies which occurred in the Western Rift Valley of Africa including the Tanganyika and Upemba Rift.     

Time-dependent analysis of aftershock events and structural impacts on intraplate crustal seismicity of the Van earthquake (Mw 7.1, 23 October 2011), E-Anatolia

The Van earthquake (M _W 7.1, 23 October 2011) in E-Anatolia is typical representative of intraplate earthquakes. Its thrust focal character and aftershock seismicity pattern indicate the most prominent type of compound earthquakes due to its multifractal dynamic complexity and uneven compressional nature, ever seen all over Turkey. Seismicity pattern of aftershocks appears to be invariably complex in its overall characteristics of aligned clustering events. The population and distribution of the aftershock events clearly exhibit spatial variability, clustering-declustering and intermittency, consistent with multifractal scaling. The sequential growth of events during time scale shows multifractal behavior of seismicity in the focal zone. The results indicate that the extensive heterogeneity and time-dependent strength are considered to generate distinct aftershock events. These factors have structural impacts on intraplate seismicity, suggesting multifractal and unstable nature of the Van event. Multifractal seismicity is controlled by complex evolution of crustal-scale faulting, mechanical heterogeneity and seismic deformation anisotropy. Overall seismicity pattern of aftershocks provides the mechanism for strain softening process to explain the principal thrusting event in the Van earthquake. Strain localization with fault weakening controls the seismic characterization of Van earthquake and contributes to explain the anomalous occurrence of aftershocks and intraplate nature of the Van earthquake.     

Retrieving three-dimensional coseismic displacements of the 2008 Gaize,Tibet earthquake from multi-path interferometric phase analysis

In this paper, synthetic aperture radar (SAR) data from ENVISAT ASAR ascending, descending and ALOS PALSAR ascending orbits are collected to investigate the coseismic displacements of the Mw 6.4 earthquake occurred in Gaize, Tibet on January 9, 2008 and the Mw 5.9 aftershock on January 16, 2008. Two interferometric phase analysis techniques, i.e., D-InSAR and multi-aperture InSAR, are employed to process the SAR data, with which the displacement measurements along three different line-of-sight (LOS) and three different azimuth directions are retrieved, respectively. Complete three-dimensional (3-D) coseismic displacement fields caused by the earthquake are then resolved by integrating the obtained LOS and azimuth displacement measurements with a weighted least squares adjustment, whose distributions are conformed to the two north-northeast trending northwest-dipping normal faults detected in previous studies. Ground subsidence and uplift are observed in the hanging wall and footwall of the main fault, respectively, and the subsidence reaches its maximum in the hanging wall of the second fault as a superimposed result of the Gaize earthquake and its aftershock. Anti-symmetric horizontal movements are also detected during the seismic events, which move inward in the focal region, but outward at the marginal. The left-lateral motions near the main fault indicate a small striking slip component caused by the Gaize earthquake. Finally, we discuss the potential of applying the derived spatially continuous 3-D displacement fields to determine the high-resolution 3-D strain fields of the Gaize earthquake, which provide important knowledge for assessing the source mechanism.     

On the problem of destructive Iranian earthquakes and their causative faults

This article is devoted to evaluating destructive earthquakes (magnitude >6) of Iran and determining properties of their source parameters. First of all, a database of documented earthquakes has been prepared via reliable references and causative faults of each event have been determined. Then, geometric parameters of each fault have been presented completely. Critical parameters such as Maximum Credible Rupture, MCR, and Maximum Credible Earthquake, MCE, have been compiled based on the geometrical parameters of the earthquake faults. The calculated parameters have been compared to the maximum earthquake and the surface rupture which have been recorded for the earthquake faults. Also, the distance between the epicenter of documented earthquake events and their causative faults has been calculated (the distance was less than 20 km for 90% of the data). Then, the distance between destructive earthquakes (with the magnitude more than 6) and the nearest active fault has been calculated. If the estimated distance is less than 20 km and the mechanism of the active fault and the event are reported the same, the active fault will be introduced as a probable causative fault of that earthquake. In the process, all of the available geological, tectonic, seismotectonic maps, aerial geophysical data as well as remote sensing images have been evaluated. Based on the quality and importance of earthquake data, the events have been classified into three categories: (1) the earthquakes which have their causative faults documented, (2) the events with magnitude higher than 7, and (3) the events with the magnitude between 6 and 7. For each category, related maps and tables have been compiled and presented. Some important faults and events have been also described throughout the paper. As mentioned in this paper, these faults are likely to be in high seismic regions with potential for large-magnitude events as they are long, deep and bound sectors of the margins characterized by different deformation and coupling rates on the plate interface.     

Modelling the pore fluid diffusion process in aftershock initiation for 2004 Sumatra earthquake: implications for marine geohazard estimation in the Andaman region

The role of fluid injection on the occurrence and migration path for the aftershocks of 2004 Sumatra earthquake (Mw 9.3) and January 2005 Andaman earthquake swarm within the aftershock sequence is investigated here from the viewpoint of pore fluid diffusion process. The Sumatra earthquake created a regionally extensive crustal rupture plane exceeding 1,200 km length below the Andaman Sea. The r–t plots (Shapiro et al. 1997) are constructed for these aftershocks in order to examine the role of poroelastic effects as rupturing progressed with time. Their main results are as follows: the r–t plot corresponding to first 3 h of aftershock activity (when only 44 events of mb ≥ 4.5 originated) reveals that 95% of the data points occurred below the modelled parabola with relatively high D value of 20 m²/s, whereas a significantly low D value of 3.5 m²/s characterises the aftershock activity for the first 24 h (when 420 events of mb ≥ 4.0 occurred). Here, the Coulomb stress was transferred from the main shock with a rapid imposition of normal stress, thus inducing the pore-pressure change that started diminishing almost immediately by fluid diffusion, at a rate, defined by the diminishing D value. The modelling results for fault seismicity at far off distances from the main epicentre are interpreted here as potential indicators for large-scale sub-seabed rupturing—consequent to stress changes induced by bending of the Indian Ocean plate. Bathymetric slopes under the Andaman subduction zone are particularly amenable to sub-marine slides where crustal E–W hinge faults inferred seismically cut across the N–S trending regional thrust and strike-slip faults. Seabed rupturing appears to allow deep-slab hydration in these areas, producing pressure gradients along the normal faults. These features are important since they can herald marine geohazards in the Andaman region.     

Spatial variation of aftershock activity across the rupture zone of the 17 August 1999 Izmit earthquake, Turkey

We examined the spatial variation in the aftershock activity from the 17 August 1999 Izmit, Turkey earthquake. We found that this aftershock sequence is non-uniform both in space and time, aspects that need to be taken into account in any further statistical analysis. Other aspects of this aftershock sequence are similar to other aftershock sequences, namely low b-values and a high degree of spatial variation. We have detected three zones of relatively high b-values, two of which coincide with asperities revealed by previous slip inversion studies. The third zone with an anomalous b-value is located beyond the fault rupture and indicates a weakened fractured zone in the Yalova-Tuzla area. This b-value analysis provided no evidence for any significant difference that may exist between the two sides of the mainshock fault plane.     

Triggered/migrated seismicity due to the 2001 M w7.7 Bhuj earthquake, Western India

Paper describes triggered seismicity to 200?km distance and for a decade due to the 2001 M _w7.7 Bhuj earthquake. The Kachchh region is seismically one of the most active intraplate regions of the World due to the occurrence of two large earthquakes 1819 (M _w7.8) and 2001 (M _w7.7). Though, it has high hazard but was known to have low seismicity in view of the occurrence of fewer smaller shocks. However, the status seems to have changed after 2001. Besides the strong aftershock activity for over a decade, seismicity has spread to nearby faults in Kachchh peninsula and at several places southward for 200?km distance in Saurashtra peninsula. Beyond the rupture zone of the 2001 Bhuj earthquake, more than 40 mainshocks of M _w?~?3?C5 have occurred at 20 different locations, which is unusual. The increased seismicity is inferred to be caused by stress perturbation due to the 2001 Bhuj earthquake by viscoelastic process. In Saurashtra, over and above the viscoelastic stress increase, the transient stress increase by water table rise in monsoons seems to be affecting the timing of mainshocks and associated sequences of earthquakes.     

Static stress changes induced by the 1924 Pasinler (M = 6.8) and 1983 Horasan-Narman (M = 6.8) earthquakes, Northeastern Turkey

The 1924 Pasinler & 1983 Horasan-Narman earthquakes which struck the Erzurum region occurred on the NE–SW-trending Horasan fault zone about 60 km east of Erzurum basin. The inversion of teleseismic seismograms, the aftershock pattern and the surface faulting of the 30 October 1983 ( M _s = 6.8) Horasan-Narman earthquake indicate that it had dominantly left-lateral motion. One moderately sized aftershock occurred 8 h after the main event and two others a year later on the NE extension of the fault zone. The aftershock distribution dominantly overlapped with the Horasan fault zone, and the aftershocks also migrated from south-west to north-east within the year following the mainshock. The results obtained from modelling of static stress changes caused by the 1983 earthquake are consistent with the spatial distribution of aftershocks. Macroseismic observations of the 1924 earthquake ( M _s = 6.8) indicated that this event occurred on the SW extension of the Horasan fault zone. Static stress modelling of the 1924 earthquake, by using the same input parameters of the 1983 event, has shown that its occurrence increased the stress in the region of the 1983 rupture zone. The static stress changes caused both by the 1924 and the 1983 earthquakes has increased the failure stress at the NE and SW extensions of the Horasan fault zone and in Narman area. Furthermore, the stress has decreased in the vicinity of the Erzurum fault zone, east of the city of Erzurum, the largest city in eastern Turkey, and in the populated Sarikamis area. This might delay the occurrence of a future probable damaging earthquake in these areas.