Mound‐forming cold‐water corals and bryozoans in the Early Palaeocene of Denmark

The Faxe Quarry in south‐east Denmark offers excellent exposures of Early Palaeocene, Danian deep‐water intercalated coral and bryozoan mounds that form complexes at least 40 m thick and a few kilometres wide along and over submarine highs. The coexisting coral and bryozoan mounds represent two different biogenic carbonate factories with a highly dynamic interplay during growth. The sedimentary facies, mound geometries and the density, diversity and palaeoecology of the associated benthic invertebrates and nannofossils allow recognition of six successive growth units. Unit 1 represents an outer shelf bryozoan mound belt characterized by an oligotrophic cool‐water nannofossil assemblage. Unit 2 comprises a mixed faunal assemblage of bryozoans and octocorals with an initial sparse colonization of hexacorals. The nannofossil assemblage records a decrease in diversity and an increase in warm water forms. Unit 3 marks the onset of dense colonization of the scleractinian coral Dendrophyllia candelabrum with associated low‐diversity macrofauna and nannofossil assemblages. Unit 4 represents the main coral build‐up phase with frame‐building hexacorals of Dendrophyllia and Faxephyllia associated with a high‐diversity invertebrate fauna, and relatively low‐diversity nannofossil assemblages. Unit 5 represents the late coral mound phase showing extensive lateral distribution and finally death and erosion of the coral mounds. This event was contemporaneous with a warming trend in the pelagic environment. The succeeding Unit 6 marks the burial and overgrowth of the coral mound complex by bryozoan‐rich sediments. The coral mound complex in the Faxe Quarry initiated and terminated in global nannofossil zone NP 3 and regional nannofossil zones NNT p2G–3 suggesting a mound growth duration of ca 300 kyr and a mean vertical accretion of the coral mound of 13 cm kyr⁻¹. The mound complex probably serves as the best‐exposed analogue to modern deep and cold‐water coral mounds in the North Atlantic.     

Variability of cold‐water coral mounds in a high sediment input and tidal current regime,Straits of Florida

Cold‐water coral mound morphology and development are thought to be controlled primarily by current regime. This study, however, reveals a general lack of correlation between prevailing bottom current direction and mound morphology (i.e. footprint shape and orientation), as well as current strength and mound size (i.e. footprint area and height). These findings are based on quantitative analyses of a high‐resolution geophysical dataset collected with an Autonomous Underwater Vehicle from three cold‐water coral mound sites at the toe of slope of Great Bahama Bank. The three sites (80 km² total) have an average of 14 mounds km^?2, indicating that the Great Bahama Bank slope is a major coral mound region. At all three sites living coral colonies are observed on the surface of the mounds, documenting active mound growth. Morphometric analysis shows that mounds at these sites vary significantly in height (1 to 83 m), area (81 to 6 00 000 m²), shape (mound aspect ratio 0·1 to 1) and orientation (mound longest axis 0 to 180°). The Autonomous Underwater Vehicle measured bottom current data depict a north–south flowing current that reverses approximately every six hours. The tidal nature of this current and its intermittent deviations during reversals are interpreted to contribute to the observed mound complexity. An additional factor contributing to the variability in mound morphometrics is the sediment deposition rate that varies among and within sites. At most locations sedimentation rate lags slightly behind mound growth rate, causing mounds to develop into large structures. Where sedimentation rates are higher than mound growth rates, sediment partially or completely buries mounds. The spatial distribution and alignment of mounds can also be related to gravity mass deposits, as indicated by geomorphological features (for example, slope failure and linear topographic highs) in the three‐dimensional bathymetry. In summary, variability in sedimentation rates, current regime and underlying topography produce extraordinarily high variability in the distribution, development and morphology of coral mounds on the Great Bahama Bank slope.     

Unique authigenic mineral assemblages reveal different diagenetic histories in two neighbouring cold‐water coral mounds on Pen Duick Escarpment,Gulf of Cadiz

Alpha Mound and Beta Mound are two cold‐water coral mounds, located on the Pen Duick Escarpment in the Gulf of Cadiz amidst the El Arraiche mud volcano field where focused fluid seepage occurs. Despite the proximity of Alpha Mound and Beta Mound, both mounds differ in their assemblage of authigenic minerals. Alpha Mound features dolomite, framboidal pyrite and gypsum, whereas Beta Mound contains a barite layer and predominantly euhedral pyrite. The diagenetic alteration of the sedimentary record of both mounds is strongly influenced by biogeochemical processes occurring at shallow sulphate methane transition zones. The combined sedimentological, petrographic and isotopic analyses of early diagenetic features in gravity cores from Alpha Mound and Beta Mound indicate that the contrast in mineral assemblages between these mounds is caused by differences in fluid and methane fluxes. Alpha Mound appears to be affected by strong fluctuations in the fluid flow, causing shifts in redox boundaries, whereas Beta Mound seems to be a less dynamic system. To a large extent, the diagenetic regimes within cold‐water coral mounds on the Pen Duick Escarpment appear to be controlled by fluid and methane fluxes deriving from layers underlying the mounds and forcings like pressure gradients caused by bottom current. However, it also becomes evident that authigenic mineral assemblages are not only very sensitive recorders of the diagenetic history of specific cold‐water coral mounds, but also affect diagenetic processes in turn. Dissolution of aragonite, lithification by precipitation of authigenic minerals and subsequent brecciation of these lithified layers may also exert a control on the advective and diffusive fluid flow within these mounds, providing a feedback mechanism on subsequent diagenetic processes.     

Thérèse Mound: a case study of coral bank development in the Belgica Mound Province,Porcupine Seabight

High-resolution seismic profiles, swath bathymetry, side-scan sonar data and video imageries are analysed in this detailed study of five carbonate mounds from the Belgica mound province with special emphasis on the well-surveyed Thérèse Mound. The selected mounds are located in the deepest part of the Belgica mound province at water depths of 950 m. Seismic data illustrate that the underlying geology is characterised by drift sedimentation in a general northerly flowing current regime. Sigmoidal sediment bodies create local slope breaks on the most recent local erosional surface, which act as the mound base. No preferential mound substratum is observed, neither is there any indication for deep geological controls on coral bank development. Seismic evidence suggests that the start-up of the coral bank development was shortly after a major erosional event of Late Pliocene–Quaternary age. The coral bank geometry has been clearly affected by the local topography of this erosional base and the prevailing current regime. The summits of the coral banks are relatively flat and the flanks are steepest on their upper slopes. Deposition of the encased drift sequence has been influenced by the coral bank topography. Sediment waves are formed besides the coral banks and are the most pronounced bedforms. These seabed structures are probably induced by bottom current up to 1 m/s. Large sediment waves are colonised by living corals and might represent the initial phase of coral bank development. The biological facies distribution of the coral banks illustrate a living coral cap on the summit and upper slope and a decline of living coral populations toward the lower flanks. The data suggest that the development of the coral banks in this area is clearly an interaction between biological growth processes and drift deposition both influenced by the local topography and current regime.     

Three-dimensional architecture and development of Danian bryozoan mounds at Limhamn, south-west Sweden, using ground-penetrating radar

Bryozoan mounds from the middle Danian (Lower Palaeocene) of the Danish Basin represent a possibly new class of non‐cemented skeletal mounds. The sedimentology and palaeoecology of the mounds have recently been studied in detail. Three‐dimensional images of middle Danian bryozoan mound structures in the Limhamn limestone quarry, south‐west Sweden, obtained from combined reflected ground‐penetrating radar signals and outcrop analysis provide new information about the architecture and growth development of such mounds. The mounds are composed of bryozoan limestone and dark‐grey to black flint bands which outline mound geometries. Ground‐penetrating radar data sections are collected over a 120 m by 60 m grid of data lines with trace spacing of 0·25 m, providing a depth penetration of 7 to 12 m and a vertical resolution of ca 0·30 m. The ground‐penetrating radar images outline the geometry of the internal layering of the mounds which, typically, have widths and lengths of 30 to 60 m and heights of 5 to 10 m. Mound architecture and growth show great variability in the ground‐penetrating radar images. Small‐scale mound structures with a palaeorelief of only a few metres may constitute the basis for growth of larger mounds. The outermost beds of the individual mounds are commonly characterized by sub‐parallel to parallel reflections which have a circular to slightly oval appearance in map view. The mounds are mainly aggrading and do not show clear signs of pronounced lateral migration during growth, although some mound structures indicate a preferential growth direction towards the south. Growth patterns interpreted from the ground‐penetrating radar images suggest that the palaeocurrents in the study area may have shown great variability, even on a small scale. This observation is in contrast to results from studies of extensive, slightly older early Danian mound complexes exposed in coastal cliffs at Stevns Klint and Karlby Klint located 50 and 200 km away from the study area, respectively. At these locations the mounds show a remarkably uniform development and typically are asymmetrical, clearly showing migration directions towards the south. These differences in mound geometry may be the result of differences in the current systems and water depths that existed during formation of the early and middle Danian mounds, respectively. The mounds at Limhamn were located closer to the basin margin in shallower water than those at Stevns Klint and Karlby Klint. In addition, the difference in mound architecture may be due to the occurrence of non‐layered, irregular coral mounds intercalated with the bryozoan mounds at Limhamn.     

Diagenetic formation of gypsum and dolomite in a cold‐water coral mound in the Porcupine Seabight,off Ireland

Authigenic gypsum was found in a gravity core, retrieved from the top of Mound Perseverance, a giant cold‐water coral mound in the Porcupine Basin, off Ireland. The occurrence of gypsum in such an environment is intriguing, because gypsum, a classic evaporitic mineral, is undersaturated with respect to sea water. Sedimentological, petrographic and isotopic evidence point to diagenetic formation of the gypsum, tied to oxidation of sedimentary sulphide minerals (i.e. pyrite). This oxidation is attributed to a phase of increased bottom currents which caused erosion and enhanced inflow of oxidizing fluids into the mound sediments. The oxidation of pyrite produced acidity, causing carbonate dissolution and subsequently leading to pore‐water oversaturation with respect to gypsum and dolomite. Calculations based on the isotopic compositions of gypsum and pyrite reveal that between 21·6% and 28·6% of the sulphate incorporated into the gypsum derived from pyrite oxidation. The dissolution of carbonate increased the porosity in the affected sediment layer but promoted lithification of the sediments at the sediment‐water interface. Thus, authigenic gypsum can serve as a signature for diagenetic oxidation events in carbonate‐rich sediments. These observations demonstrate that fluid flow, steered by environmental factors, has an important effect on the diagenesis of coral mounds.     

Benthic foraminifera in a deep-sea high-energy environment: the Moira Mounds (Porcupine Seabight,SW of Ireland)

Cold-water coral ecosystems represent unique and exceptionally diverse environments in the deep-sea. They are well developed along the Irish margin, varying broadly in shape and size. The Moira Mounds, numerous small-sized mounds, are nestled in the Belgica Mound Province (Porcupine Seabight, North-East Atlantic). The investigation of living (Rose Bengal stained) and dead benthic foraminiferal assemblages from these mounds allowed to describe their distribution patterns and to evaluate their response to environmental variability. Quantitative data was statistically treated to define groups of species/genera associated to specific habitats. The Moira Mounds differ from their larger neighbours by the reduced spatial variability of benthic foraminiferal assemblages, living assemblages only distinguishing coral-rich and coral-barren areas. The ecological needs of corals are highlighted by the abundance of Alabaminella weddellensis and Nonionella iridea, phytodetritus-feeding species in coral supporting sediments. Living foraminifera in sediments from the Moira Mounds concentrate in the upper first centimetre. Infaunal species may be affected by bioturbation and/or reworking by the strong currents in the area. Dead foraminiferal assemblages from the Moira Mounds resemble those described for the sandwave facies in adjacent giant mounds, suggesting similar processes in facies deposition.     

Aragonite loss in a cold‐water coral mound: mechanisms and implications

Selective dissolution of aragonitic grains is emerging as a volumetrically significant process that affects a broad range of modern carbonate settings. This study explores mechanisms and implications of aragonite loss in Challenger Mound, a giant cold‐water coral (Lophelia pertusa) mound of Pleistocene age, which lies on the continental slope off south‐west Ireland. A comprehensive sampling scheme allowed the integration of petrographic data with geochemical analyses of sediment and pore water. The mound remains virtually unlithified and consists of stacked, fining‐upward cycles of silty coral floatstone–rudstone and bafflestone grading into wackestone. Whereas calcitic grains appear unaltered, aragonitic grains are corroded and fragmented. Aragonite dissolution is attributed to organic matter oxidation at/near the sediment–water interface and, at greater depths, to the initial stages of bacterially mediated sulphate reduction, when alkalinity production is outpaced by the generation of H⁺. Pore water profiles indicate that undersaturated waters are diffusing towards the mound interior from two centres of sulphate reduction: one located in the upper 10 m of the sediment column and a second that lies below an erosional unconformity which marks the base of the mound. Continued aragonite dissolution is expected to gradually lower the diagenetic potential of the Challenger Mound and delay lithification until deep burial, when solution‐compaction processes come into play. Despite a fundamental role in predestining the final taphonomic and textural characteristics of Challenger Mound, the processes described here are expected to leave little trace in the geological record due to a lack of cementation and calcitization. Assuming that similar processes have been active throughout the Phanerozoic, results imply that the understanding of diagenetic processes in carbonate systems may be incomplete.     

Reservoir Potential of Silurian Carbonate Mud Mounds in the Southern Sichuan Basin, Central China

Lower Silurian mud mounds of the Shinuilan Formation, located in the southern Sichuan Basin, China, have developed in open shelf settings in deeper water than shallow-water reef-bearing limestones that occur in the region. An integration of the outcrop, drill data and seismic profiles show that contemporaneous faults have controlled the boundary and distribution of the sedimentary facies of Lower Silurian rocks in the southern Sichuan Basin. Mounds appear to have developed in the topographic lows formed by synsedimentary faulting, on the sheff of the Yangtze Platform. Average mound thickness is 20 m, maximum 35 m. Mounds are composed mainly of micrite, possibly microbially bound, and are overlain by shales. Mound tops are preferentially dolomitized, with the Mg^2＋ source probably from the clay content of the mound-top carbonate. Microfacies analysis and reconstruction of the diagenetic history reveal that the mound tops have higher porosity, and are gas targets; in contrast, mound cores and limbs show pores filled by three generations of calcite cement, and therefore have a low gas potential.     

The Magellan mound province in the Porcupine Basin

The Magellan mound province is one of the three known provinces of carbonate mounds or cold-water coral banks in the Porcupine Seabight, west of Ireland. It has been studied in detail using a large and varied data set: 2D and 3D seismic data, sidescan sonar imagery and video data collected during ROV deployment have been used to describe the mounds in terms of origin, growth processes and burial. The aim of this paper is to present the Magellan mounds and their setting in an integrated, holistic way. More than 1,000 densely spaced and mainly buried mounds have been identified in the area. They all seem to be rooted on one seismic reflection, suggesting a sudden mound start-up. Their size and spatial distribution characteristics are presented, together with the present-day appearance of the few mounds that reach the seabed. The underlying geology has been studied by means of fault analysis and numerical basin modelling in an attempt to identify possible hydrocarbon migration pathways below or in the surroundings of the Magellan mounds. Although conclusive evidence concerning the processes of mound initiation proves to be elusive, the results of both fault analysis and 2D numerical modelling failed to identify, with confidence, any direct pathways for focused hydrocarbon flow to the Magellan province. Diffuse seepage however may have taken place, as drainage area modelling suggests a possible link between mound position and structural features in the Hovland-Magellan area. During mound development and growth, the interplay of currents and sedimentation seems to have been the most important control. Mounds which could not keep pace with the sedimentation rates were buried, and on the few mounds which maintained growth, only a few corals survive at present.     

In a PICL: The sedimentary deposits and facies of perennially ice‐covered lakes

Perennially ice‐covered lakes can have significantly different facies than open‐water lakes because sediment is transported onto the ice, where it accumulates, and sand grains preferentially melt through to be deposited on the lake floor. To characterize the facies in these lakes, sedimentary deposits from five Antarctic perennially ice‐covered lakes were described using lake‐bottom observations, underwater video and images, and sediment cores. One lake was dominated by laminated microbial mats and mud (derived from an abutting glacier), with disseminated sand and rare gravel. The other four lakes were dominated by laminated microbial mats and moderately well to moderately sorted medium to very coarse sand with sparse granules and pebbles; they contained minor interstitial or laminated mud (derived from streams and abutting glaciers). The sand was disseminated or localized in mounds and 1 m to more than 10 m long elongate ridges. Mounds were centimetres to metres in diameter; conical, elongate or round in shape; and isolated or deposited near or on top of one another. Sand layers in the mounds had normal, inverse, or no grading. Nine mixed mud and sand facies were defined for perennially ice‐covered lakes based on the relative proportion of mud to sand and the style of sand deposition. While perennially ice‐covered lake facies overlap with other ice‐influenced lakes and glaciomarine facies, they are characterized by a paucity of grains coarser than granules, a narrow range in sand grain sizes, and inverse grading in the sand mounds. These facies can be used to infer changes in ice cover through time and to identify perennially ice‐covered lakes in the rock record. Ancient perennially ice‐covered lakes are expected on Earth and Mars, and their characterization will provide new insights into past climatic conditions and habitability.     

Environmental changes and growth history of a cold-water carbonate mound (Propeller Mound,Porcupine Seabight)

On- and off-mound sediment cores from Propeller Mound (Hovland Mound province, Porcupine Seabight) were analysed to understand better the evolution of a carbonate mound. The evaluation of benthic foraminiferal assemblages from the off-mound position helps to determine the changes of the environmental controls on Propeller Mound in glacial and interglacial times. Two different assemblages describe the Holocene and Marine Isotope Stage (MIS) 2 and late MIS 3 (∼31 kyr BP). The different assemblages are related to changes in oceanographic conditions, surface productivity and the waxing and waning of the British Irish Ice Sheet (BIIS) during the last glacial stages. The interglacial assemblage is related to a higher supply of organic material and stronger current intensities in water depth of recent coral growth. During the last glaciation the benthic faunas showed high abundances of cassidulinid species, implying cold bottom waters and a reduced availability of organic matter. High sedimentation rates and the domination of Elphidium excavatum point to shelf erosion related to sea-level lowering (∼50 m) and the progradation of the BIIS onto the shelf. A different assemblage described for the on-mound core is dominated by Discanomalina coronata, Gavelinopsis translucens, Planulina ariminensis, Cibicides lobatulus and to a lower degree by Hyrrokkin sarcophaga. These species are only found or show significantly higher relative abundances in on-mound samples and their maximum contribution in the lower part of the record indicates a higher coral growth density on Propeller Mound in an earlier period. They are less abundant during the Holocene, however. This dataset portrays the boundary conditions of the habitable range for the cold-water coral Lophelia pertusa, which dominates the deep-water reefal ecosystem on the upper flanks of Propeller Mound. The growth of this ecosystem occurs during interglacial and interstadial periods, whereas a retreat of corals is documented in the absence of glacial sediments on-mound. Glacial conditions with cold intermediate waters, a weak current regime and high sedimentation rates provide an unfavourable environmental setting for Lophelia corals to grow. A Late Pleistocene decrease is observed in the mound growth for Propeller Mound, which might face its complete burial in the future, as it already happened to the buried mounds of the Magellan Mound province further north.     

Morphology and environment of cold-water coral carbonate mounds on the NW European margin

Cold-water coral carbonate mounds, owing their presence mainly to the framework building coral Lophelia pertusa and the activity of associated organisms, are common along the European margin with their spatial distribution allowing them to be divided into a number of mound provinces. Variation in mound attributes are explored via a series of case studies on mound provinces that have been the most intensely investigated: Belgica, Hovland, Pelagia, Logachev and Norwegian Mounds. Morphological variation between mound provinces is discussed under the premise that mound morphology is an expression of the environmental conditions under which mounds are initiated and grow. Cold-water coral carbonate mounds can be divided into those exhibiting “inherited” morphologies (where mound morphology reflects the morphology of the colonised features) and “developed” morphology (where the mounds assume their own gross morphology mainly reflecting dominant hydrodynamic controls). Finer-scale, surface morphological features mainly reflecting biological growth forms are also discussed.     

Diagenetic processes in carbonate mound sediments at the south‐west Rockall Trough margin

Cold water coral covered carbonate mounds at the south‐west margin of the Rockall Trough form ridges several kilometres long and up to 380 m high. Piston cores obtained at three mound crests reveal the complex internal structure of the mound build up, with alternating unlithified coral‐dominated intervals and lithified intervals. The most recent lithified interval is covered by corals embedded in a fine‐grained matrix, comprising ca 11 000 years of continuous mound evolution. Before this time ²³⁰Th/U dating shows the presence of several hiatuses in mound build‐up. Aragonitic coral material is absent or only present as mouldic porosity in the lithified intervals and coccoliths display widespread overgrowth. Downcore X‐ray fluorescence scanning, computer tomography scan images and petrographic observations indicate different degrees of diagenetic alteration. The upper boundary of the most recent lithified interval shows some erosional features, but petrographic observations indicate that initial lithification of the sediments is not related to this erosive event or to long‐term non‐sedimentation, but to earlier sub‐surface diagenesis. Organic matter oxidation and the subsequent lowering of the saturation state of the carbonate system drives dissolution of the unstable aragonitic coral skeletons. Depending on the openness of the system, this can lead to precipitation of a more stable low‐magnesium carbonate. A model is presented describing the sedimentary and diagenetic processes leading to the formation of lithified intervals.     

Ground‐penetrating radar survey of the Sny Magill Mound Group,Effigy Mounds National Monument,Iowa

A ground‐penetrating radar (GPR) survey of 101 mounds at the Sny Magill Unit of Effigy Mounds National Monument, Iowa, demonstrates that GPR can be an effective tool to evaluate the structure and condition of mounds without damaging them. Ideal survey conditions and improved processing technology allow for the identification of strata within the mounds, as well as areas of post‐construction disturbance and possible archaeological features within the mounds. Provisional interpretations indicate that 60 are intact conical mounds with minimal post‐construction disturbance, and two show very strong evidence of containing interior burial platforms; 29 are badly damaged by non‐cultural or cultural activity; two are probable non‐cultural mounds; nine are reasonably intact linear and effigy mounds; one is an excavated effigy mound. GPR and other remote‐sensing techniques are highly recommended for mound investigation, but wherever possible such techniques need to be coordinated with mound excavation so as to test the remote‐sensing results. © 2008 Wiley Periodicals, Inc.     

Carbonate budget of a cold-water coral carbonate mound: Propeller Mound,Porcupine Seabight

High resolution studies from the Propeller Mound, a cold-water coral carbonate mound in the NE Atlantic, show that this mound consists of >50% carbonate justifying the name ‘carbonate mound’. Through the last ~300,000 years approximately one third of the carbonate has been contributed by cold-water corals, namely Lophelia pertusa and Madrepora oculata. This coral bound contribution to the carbonate budget of Propeller Mound is probably accompanied by an unknown portion of sediments buffered from suspension by the corals. However, extended hiatuses in Propeller Mound sequences only allow the calculation of a net carbonate accumulation. Thus, net carbonate accumulation for the last 175 kyr accounts for only <0.3 g/cm²/kyr, which is even less than for the off-mound sediments. These data imply that Propeller Mound faces burial by hemipelagic sediments as has happened to numerous buried carbonate mounds found slightly to the north of the investigated area.     

新生代深海冷水碳酸盐泥丘成因及IODP 307航次初步研究结果

记述了新生代深海冷水碳酸盐泥丘近期的9个重要研究事件;总结了冷水泥丘具有全球海洋(大陆斜坡为主)分布、形态各异、冷水枝状珊瑚构筑泥丘的特点;介绍了冷水泥丘形成的(地质流体渗流和微生物作用)内因及(海底牵引底流作用)外因两种主要观点.对2005年IODP 307航次实施的北大西洋Porcupine Seabight冷水泥丘大洋钻探工作初步成果进行了编译,公布了中国科学家在碳氧同位素方面的初步实验结果.实验结果显示上新世中期以来的2 Ma里冷水碳酸盐泥丘启动和发育过程中存在2次碳氧同位素偏移事件(Ⅰ和Ⅱ),碳氧同位素偏移事件Ⅰ与泥丘的启动相呼应,暗示北大西洋古海洋气候发生巨大变化,可能与北极冰盖极盛有关.     

Benthic dynamics at the carbonate mound regions of the Porcupine Sea Bight continental margin

A brief review is given of some dynamical processes that influence the benthic dynamics within the carbonate mound provinces located at the Porcupine Bank/Sea Bight margin, NE Atlantic. The depth range of the mounds in this region (600–1,000 m) marks the upper boundary of the Mediterranean outflow water above which Eastern North Atlantic Water dominates. Both water masses are carried northwards by the eastern boundary slope current. In the benthic boundary layer both the action of internal waves, and other tidal period baroclinic waves, may enhance the bottom currents and add to both the residual and maximum flow strength. Both residual and maximum bottom currents vary at different mound locations, with stronger currents found at Belgica (SE Porcupine Sea Bight) mound and Pelagia (NW Porcupine Bank) mound regions, whilst weakest currents are found at the Hovland and Magellan Mounds at the northern Sea Bight margin. The differences may be attributed to the presence of internal waves (Pelagia) or bottom intensified diurnal waves (Belgica). These different dynamical regimes are likely to have implications for the distribution patterns of live coral at the different locations.     

Sediment dynamics of a sandy contourite: the sedimentary context of the Darwin cold-water coral mounds,Northern Rockall Trough

Grainsize, mineralogy and current-meter data from the Northern Rockall Trough are presented in order to characterise the sandy contourite that forms the sedimentary environment of the Darwin cold-water coral mounds, and to investigate the impact of this environment on the mound build-up. Large clusters of small cold-water coral mounds, 75 m across and 5 m high, have been found southwest of the Wyville Thomson Ridge, at 900–1,100 m water depth. Their present-day sedimentary environment consists of a subtly sorted sandy contourite, elongated NE–SW, roughly parallel to the contours. Critical erosional and depositional current speeds were calculated, and trends in both the quartz/feldspar and foraminifera fractions of the sands show a bi-directional fining from bedload/erosion-dominated sands in the NE to suspension/deposition-dominated sediments in the SW and towards the S (downslope). This is caused by a gradual reduction in governing current speed, linked to a reduction in slope gradient, and by the increasing distance from the current core in the downslope direction. No specific characteristics were found distinguishing the mound sediments from the surrounding sands: they fit in the overall spatial pattern. Some mound cores show hints of a fining-upward trend. Overall the mound build-up process is interpreted as a result of sediment baffling.