Salt thickness and composition influence rift structural style,northern North Sea,offshore Norway

“Salt” giants are typically halite‐dominated, although they invariably contain other evaporite (e.g. anhydrite, bittern salts) and non‐evaporite (e.g. carbonate, clastic) rocks. Rheological differences between these rocks mean they impact or respond to rift‐related, upper crustal deformation in different ways. Our understanding of basin‐scale lithology variations in ancient salt giants, what controls this and how this impacts later rift‐related deformation, is poor, principally due to a lack of subsurface datasets of sufficiently regional extent. Here we use 2D seismic reflection and borehole data from offshore Norway to map compositional variations within the Zechstein Supergroup (ZSG) (Lopingian), relating this to the structural styles developed during Middle Jurassic‐to‐Early Cretaceous rifting. Based on the proportion of halite, we identify and map four intrasalt depositional zones (sensu Clark et al., Journal of the Geological Society, 1998, 155, 663) offshore Norway. We show that, at the basin margins, the ZSG is carbonate‐dominated, whereas towards the basin centre, it becomes increasingly halite‐dominated, a trend observed in the UK sector of the North Sea Basin and in other ancient salt giants. However, we also document abrupt, large magnitude compositional and thickness variations adjacent to large, intra‐basin normal faults; for example, thin, carbonate‐dominated successions occur on fault‐bounded footwall highs, whereas thick, halite‐dominated successions occur only a few kilometres away in adjacent depocentres. It is presently unclear if this variability reflects variations in syn‐depositional relief related to flooding of an underfilled presalt (Early Permian) rift or syn‐depositional (Lopingian) rift‐related faulting. Irrespective of the underlying controls, variations in salt composition and thickness influenced the Middle Jurassic‐to‐Early Cretaceous rift structural style, with diapirism characterising hangingwall basins where autochthonous salt was thick and halite‐rich and salt‐detached normal faulting occurring on the basin margins and on intra‐basin structural highs where the salt was too thin and/or halite‐poor to undergo diapirism. This variability is currently not captured by existing tectono‐stratigraphic models largely based on observations from salt‐free rifts and, we argue, mapping of suprasalt structural styles may provide insights into salt composition and thickness in areas where boreholes are lacking or seismic imaging is poor.     

Evolution of salt structures in the northern Paradox Basin: controls on evaporite deposition,salt wall growth and supra‐salt stratigraphic architecture

The northern Paradox Basin evolved during the Late Pennsylvanian–Permian as an immobile foreland basin, the result of flexural subsidence in the footwall of the growing Uncompahgre Ancestral Rocky Mountain thick‐skinned uplift. During the Atokan‐Desmoinesian (～313–306 Ma) fluctuating glacio‐eustatic sea levels deposited an ～2500 m thick sequence of evaporites (Paradox Formation) in the foreland basin, interfingering with coarse clastics in the foredeep and carbonates around the basin margins. The cyclic deposition of the evaporites produced a repetitive sequence of primarily halite, with minor clastics, organic shales and anhydrite. Sediment loading of the evaporites subsequently produced a series of salt walls and minibasins, through the process of passive diapirism or downbuilding. Faults at the top Mississippian level localised the development of linear salt walls (up to 4500 m high) along a NW–SE trend. A crosscutting NE–SW structural trend was also important in controlling the evaporite facies and the abrupt termination of the salt walls. Seismic, well and field data define the proximal Cutler Group (Permian) as a basinward prograding sequence derived from the growing Uncompahgre uplift that drove salt basinwards (towards the southwest), triggering the growth of the salt walls. Sequential structural restorations indicate that the most proximal salt walls evolved earlier than the more distal ones. The successive development of salt‐withdrawal minibasins associated with each growing salt wall implies that parts of the Cutler Group in one minibasin may have no chronostratigraphic equivalent in other minibasins. Localised changes in along‐strike salt wall growth and evolution were critical in the development of facies and thickness variations in the late Pennsylvanian to Triassic stratigraphic sequences in the flanking minibasins. Salt was probably at or very close to the surface during the downbuilding process leading to localised thinning, deposition of diapir‐derived detritus and rapid facies changes in sequences adjacent to the salt wall structures.     

Base-salt relief controls salt-tectonic structural style,São Paulo Plateau,Santos Basin,Brazil

Base-salt relief influences salt flow, producing three-dimensionally complex strains and multiphase deformation within the salt and its overburden. Understanding how base-salt relief influences salt-related deformation is important to correctly interpret salt basin kinematics and distribution of structural domains, which have important implications to understand the development of key petroleum system elements. The São Paulo Plateau, Santos Basin, Brazil is characterized by a >2 km thick, mechanically layered Aptian salt layer deposited above prominent base-salt relief. We use 3D seismic reflection data, and physical and conceptual kinematic models to investigate how gravity-driven translation above thick salt, underlain by complex base-salt relief, generated a complex framework of salt structures and minibasins. We show that ramp-syncline basins developed above and downdip of the main pre-salt highs record c. 30 km of Late Cretaceous-Paleocene basinward translation. As salt and overburden translated downdip, salt flux variations caused by the base-salt relief resulted in non-uniform motion of the cover, and the simultaneous development of extensional and contractional structures. Contraction preferentially occurred where salt flow locally decelerated, above landward-dipping base-salt and downdip of basinward-dipping ramps. Extension occurred at the top of basinward-dipping ramps and base-salt plateaus, where salt flow locally accelerated. Where the base of the salt layer was broadly flat, structures evolved primarily by load-driven passive diapirism. At the edge of or around smaller base-salt highs, salt structures were affected by plan-view rotation, shearing and divergent flow. The magnitude of translation (c. 30 km) and the style of salt-related deformation observed on the São Paulo Plateau afford an improved kinematic model for the enigmatic Albian Gap, suggesting this structure formed by a combination of basinward salt expulsion and regional extension. These observations contribute to the long-lived debate regarding the mechanisms of salt tectonics on the São Paulo Plateau, ultimately improving our general understanding of the effects of base-salt relief on salt tectonics in other basins.     

A song of volumes,surfaces and fluxes: The case study of the Central Mallorca Depression (Balearic Promontory) during the Messinian Salinity Crisis

The Central Mallorca Depression (CMD) located in the Balearic Promontory (Western Mediterranean) contains a well-preserved evaporitic sequence belonging to the Messinian Salinity Crisis (MSC) salt giant, densely covered by high- and low-resolution seismic reflection data. It has been proposed recently that the MSC evaporitic sequence in the CMD could be a non-deformed analogue of the key MSC area represented by the Caltanissetta Basin in Sicily. This presumed similarity makes the CMD an interesting system to better understand the MSC events. Physics-based box models of the water mixing between sub-basins, built on conservation of mass of water and salt, help constrain the hydrological conditions under which evaporites formed during the MSC. Those models have been widely used in the literature of the MSC in the past two decades. They have been mostly applied to the Mediterranean Sea as a whole focusing on the Mediterranean–Atlantic connection, or focusing on the influence of the Sicily Sill connecting the Western and Eastern Mediterranean Sea. In this study, we apply a downscaled version of such modelling technique to the CMD. First, we quantify the present-day volumes of the MSC units. We then use a reconstructed pre-MSC paleo-bathymetry to model salinity changes as a function of flux exchanges between the CMD and the Mediterranean. We show that a persistent connection between the CMD and the Mediterranean brine near gypsum saturation can explain volume of Primary Lower Gypsum under a sea level similar to the present. For the halite, on the contrary, we show that the observed halite volume cannot be deposited from a connected CMD-Mediterranean scenario, suggesting a drawdown of at least 850 m (sill depth) is necessary. Comparison between the deep basin halite volume and that of the CMD shows that it is possible to obtain the observed halite volume in both basins from a disconnected Mediterranean basin undergoing drawdown, although determining the average salinity of the Western Mediterranean basin at the onset of drawdown requires further investigation.     

Seismic markers of the Messinian salinity crisis in the deep Ionian Basin

We conduct the seismic signal analysis on vintage and recently collected multichannel seismic reflection profiles from the Ionian Basin to characterize the deep basin Messinian evaporites. These evaporites were deposited in deep and marginal Mediterranean sedimentary basins as a consequence of the “salinity crisis” between 5.97 and 5.33 Ma, a basin-wide oceanographic and ecological crisis whose origin remains poorly understood. The seismic markers of the Messinian evaporites in the deep Mediterranean basins can be divided in two end-members, one of which is the typical “trilogy” of gypsum and clastics (Lower Unit – LU), halite (Mobile Unit – MU) and upper anhydrite and marl layers (Upper Unit – UU) traced in the Western Mediterranean Basins. The other end-member is a single MU unit subdivided in seven sub-units by clastic interlayers located in the Levant Basin. The causes of these different seismic expressions of the Messinian salinity crisis (MSC) appear to be related to a morphological separation between the two basins by the structural regional sill of the Sicily Channel. With the aid of velocity analyses and seismic imaging via prestack migration in time and depth domains, we define for the first time the seismic signature of the Messinian evaporites in the deep Ionian Basin, which differs from the known end-members. In addition, we identify different evaporitic depositional settings suggesting a laterally discontinuous deposition. With the information gathered we quantify the volume of evaporitic deposits in the deep Ionian Basin as 500,000 km³ ± 10%. This figure allows us to speculate that the total volume of salts in the Mediterranean basin is larger than commonly assumed. Different depositional units in the Ionian Basin suggest that during the MSC it was separated from the Western Mediterranean by physical thresholds, from the Po Plain/Northern Adriatic Basin, and the Levant Basin, likely reflecting different hydrological and climatic conditions. Finally, the evidence of erosional surfaces and V-shaped valleys at the top of the MSC unit, together with sharp evaporites pinch out on evaporite-free pre-Messinian structural highs, suggest an extreme Messinian Stage 3 base level draw down in the Ionian Basin. Such evidence should be carefully evaluated in the light of Messinian and post-Messinian vertical crustal movements in the area. The results of this study demonstrates the importance of extracting from seismic data the Messinian paleotopography, the paleomorphology and the detailed stratal architecture in the in order to advance in the understanding of the deep basins Messinian depositional environments.     

Complex interplay of faulting,glacioeustatic variations and halokinesis during deposition of upper Viséan units over thick salt in the western Cumberland Basin of Atlantic Canada

The late Palaeozoic Cumberland Basin of Nova Scotia and New Brunswick (eastern Canada) developed as a strike‐slip basin in the aftermath of the Middle Devonian Acadian Orogeny. Following deposition of thick salt during the middle Viséan (middle Mississippian), this basin mainly accommodated fault‐controlled continental deposits during the late Viséan, which generated halokinesis from clastic loading. The Mississippian halokinetic history of this basin is cryptic, as it was severely distorted by subsequent tectonic and halokinetic overprints. After minor structural restoration, the study of upper Viséan minibasin units in wide coastal sections and deep wells allowed a fairly detailed reconstruction of the Mississippian halokinetic setting to be made. Paleoenvironments and depositional settings in the western part of the basin include sectors that were proximal to three fault‐bounded source areas and characterized by alluvial fan systems transitioning laterally into gravelly to sandy braidplain environments. More central areas of the basin were characterized by tidal flats transitioning laterally into shallow marine environments. Because of halokinesis, the marine body was eventually forced to subdivide into three separate salt expulsion minibasins. Although late Viséan marine incursions were short‐lived in the rest of eastern Canada due to ongoing glacioeustatic variations, there are sedimentologic and stratigraphic lines of evidence for the long‐lasting entrapment of restricted marine bodies in salt expulsion minibasins of the western Cumberland Basin. In one minibasin that was characterized by especially high accommodation rates, NE of Hopewell Cape (New Brunswick), the proximal conglomerates and marine carbonates of a fan‐delta setting transition laterally into thick sulphate over a short distance, away from freshwater inputs from the source area. The vertical continuity of the latter sulphate succession suggests that this entrapped evaporitic basin was cut‐off from significant marine influxes, even at times of glacioeustatic highstands. This is in contrast with salt expulsion minibasins in open marine shelf settings, which always remain open to global marine transgressions and regressions.     

Impact of normal faulting and pre‐rift salt tectonics on the structural style of salt‐influenced rifts: the Late Jurassic Norwegian Central Graben,North Sea

Studies of salt‐influenced rift basins have focused on individual or basin‐scale fault system and/or salt‐related structure. In contrast, the large‐scale rift structure, namely rift segments and rift accommodation zones and the role of pre‐rift tectonics in controlling structural style and syn‐rift basin evolution have received less attention. The Norwegian Central Graben, comprises a complex network of sub‐salt normal faults and pre‐rift salt‐related structures that together influenced the structural style and evolution of the Late Jurassic rift. Beneath the halite‐rich, Permian Zechstein Supergroup, the rift can be divided into two major rift segments, each comprising rift margin and rift axis domains, separated by a rift‐wide accommodation zone – the Steinbit Accommodation Zone. Sub‐salt normal faults in the rift segments are generally larger, in terms of fault throw, length and spacing, than those in the accommodation zone. The pre‐rift structure varies laterally from sheet‐like units, with limited salt tectonics, through domains characterised by isolated salt diapirs, to a network of elongate salt walls with intervening minibasins. Analysis of the interactions between the sub‐salt normal fault network and the pre‐rift salt‐related structures reveals six types of syn‐rift depocentres. Increasing the throw and spacing of sub‐salt normal faults from rift segment to rift accommodation zone generally leads to simpler half‐graben geometries and an increase in the size and thickness of syn‐rift depocentres. In contrast, more complex pre‐rift salt tectonics increases the mechanical heterogeneity of the pre‐rift, leading to increased complexity of structural style. Along the rift margin, syn‐rift depocentres occur as interpods above salt walls and are generally unrelated to the relatively minor sub‐salt normal faults in this structural domain. Along the rift axis, deformation associated with large sub‐salt normal faults created coupled and decoupled supra‐salt faults. Tilting of the hanging wall associated with growth of the large normal faults along the rift axis also promoted a thin‐skinned, gravity‐driven deformation leading to a range of extensional and compressional structures affecting the syn‐rift interval. The Steinbit Accommodation Zone contains rift‐related structural styles that encompass elements seen along both the rift margin and axis. The wide variability in structural style and evolution of syn‐rift depocentres recognised in this study has implications for the geomorphological evolution of rifts, sediment routing systems and stratigraphic evolution in rifts that contain pre‐rift salt units.     

Structural style and evolution of a salt‐influenced rift basin margin; the impact of variations in salt composition and the role of polyphase extension

Because salt can decouple sub‐ and supra‐salt deformation, the structural style and evolution of salt‐influenced rifts differs from those developed in megoscopically homogenous and brittle crust. Our understanding of the structural style and evolution of salt‐influenced rifts comes from scaled physical models, or subsurface‐based studies that have utilised moderate‐quality 2D seismic reflection data. Relatively few studies have used high‐quality 3D seismic reflection data, constrained by borehole data, to explicitly focus on the role that along‐strike displacement variations on sub‐salt fault systems, or changes in salt composition and thickness, play in controlling the four‐dimensional evolution of supra‐salt structural styles. In this study, we use 3D seismic reflection and borehole data from the Sele High Fault System (SHFS), offshore Norway to determine how rift‐related relief controlled the thickness and lithology of an Upper Permian salt‐bearing layer (Zechstein Supergroup), and how the associated variations in the mechanical properties of this unit influenced the degree of coupling between sub‐ and supra‐salt deformation during subsequent extension. Seismic and borehole data indicate that the Zechstein Supergroup is thin, carbonate‐dominated and immobile at the footwall apex, but thick, halite‐dominated and relatively mobile in high accommodation areas, such as near the lateral fault tips and in the immediate hangingwall of the fault system. We infer that these variations reflect bathymetric changes related to either syn‐depositional (i.e. Late Permian) growth of the SHFS or underfilled, fault scarp‐related relief inherited from a preceding (i.e. Early Permian) rift phase. After a period of tectonic quiescence in the Early Triassic, regional extension during the Late Triassic triggered halokinesis and growth of a fault‐parallel salt wall, which was followed by mild extension in the Jurassic and forced folding of Triassic overburden above the fault systems upper tip. During the Early Cretaceous, basement‐involved extension resulted in noncoaxial tilting of the footwall, and the development of an supra‐salt normal fault array, which was restricted to footwall areas underlain by relatively thick mobile salt; in contrast, at the footwall apex, no deformation occurred because salt was thin and immobile. The results of our study demonstrate close coupling between tectonics, salt deposition and the style of overburden deformation for >180 Myr of the rift history. Furthermore, we show that rift basin tectono‐stratigraphic models based on relatively megascopically homogeneous and brittle crust do not appropriately describe the range of structural styles that occur in salt‐influenced rifts.     

Exposed evaporite diapirs and minibasins above a canopy in central Sverdrup Basin,Axel Heiberg Island,Arctic Canada

Axel Heiberg Island (Arctic Archipelago, northern Nunavut, Canada) contains the thickest Mesozoic section in Sverdrup Basin (11 km). The ca. 370‐km‐long island is second only to Iran in its concentration of exposed evaporite diapirs. Forty‐six diapirs of Carboniferous evaporites and associated minibasins are excellently exposed on the island. Regional anticlines, which formed during Paleogene Eurekan orogeny, trend roughly north on a regular ca. 20‐km wavelength and probably detach on autochthonous Carboniferous Otto Fiord Formation evaporites comprising halite overlain by thick anhydrite. In contrast, a 60‐km‐wide area, known as the wall‐and‐basin structure (WABS) province, has bimodal fold trends and irregular (<10 km) wavelengths. Here, crooked, narrow diapirs of superficially gypsified anhydrite crop out in tight anticline cores, which are separated by wider synclinal minibasins. We interpret the WABS province to detach on a shallow, partly exposed canopy of coalesced allochthonous evaporite sheets. Surrounding strata record a salt‐tectonic history spanning the Late Triassic (Norian) to the Paleogene. Stratigraphic thinning against diapirs and spectacular angular unconformities indicate mild regional shortening in which diapiric roof strata were bulged up and flanking strata steepened. This bulging culminated in the Hauterivian, when diapiric evaporites broke out and coalesced to form a canopy. As the inferred canopy was buried, it yielded second‐generation diapirs, which rose between minibasins subsiding into the canopy. Consistent high level emplacement suggests that all exposed diapirs inside the WABS area rose from the canopy. In contrast, diapirs along the WABS margins were sourced in autochthonous salt as first‐generation diapirs. Apart from the large diapir‐flanking unconformities, Jurassic‐Cretaceous depositional evidence of salt tectonics also includes submarine debris flows and boulder conglomerates shed from at least three emergent diapirs. Extreme local relief, tectonic slide blocks, steep talus fans and subaerial debris flows suggest that many WABS diapirs continue to rise today. The Axel Heiberg canopy is one of only three known exposed evaporite canopies, each inferred or known at a different structural level: above the canopy (Axel Heiberg), through the canopy (Great Kavir) and beneath a possible canopy (Sivas).     

Influence of minibasin obstruction on canopy dynamics in the northern Gulf of Mexico

In salt‐detached gravity‐gliding/spreading systems the detachment geometry is a key control on the downslope mobility of the supra‐salt sequence. Here, we used regional 3D seismic data to examine a salt‐stock canopy in the northern Gulf of Mexico slope, in an area where supra‐canopy minibasins subsided vertically and translated downslope above a complex base‐of‐salt. If thick enough, minibasins can interact with, and weld to, the base‐of‐salt and be obstructed from translating downslope. Based on the regional maps of the base of allochthonous salt and the base of the supra‐canopy sequence, the key controls on minibasin obstruction, we distinguished two structural domains in the study area: a highly obstructed domain and a highly mobile domain. Large‐scale translation of the supra‐canopy sequence is recorded in the mobile domain by a far‐travelled minibasin and a ramp syncline basin. These two structures suggest downslope translation on the order of 40 km from Plio‐Pleistocene to Present. In contrast, translation was impeded in the obstructed domain due to supra‐canopy bucket minibasins subsiding into feeders during the Pleistocene. As a result, we infer that differential translation occurred between the two domains and argue that a deformation area between two differentially translating supra‐canopy minibasin domains is difficult to recognize. However, characterizing domains according to base‐of‐salt geometry and supra‐canopy minibasin configuration can be helpful in identifying domains that may share similar subsidence and downslope translation histories.     

封面图片:察尔汗盐湖

采用扩展的过量吉布斯自由能模型,分别计算了1∶1、1∶2、2∶1、2∶2型四类盐的不同浓度下水溶液的冰点。对于1∶1型和1∶2型以及低浓度下的其它类型盐,计算结果与文献实验值吻合良好。同时比较了凝固点降低公式计算结果,证明过量吉布斯自由能模型在较宽浓度范围内计算冰点的结果更好。     

The stratigraphic record of minibasin subsidence,Precaspian Basin,Kazakhstan

Minibasins are fundamental components of many salt-bearing sedimentary basins, where they may host large volumes of hydrocarbons. Although we understand the basic mechanics governing their subsidence, we know surprisingly little of how minibasins subside in three-dimensions over geological timescales, or what controls such variability. Such knowledge would improve our ability to constrain initial salt volumes in sedimentary basins, the timing of salt welding and the distribution and likely charging histories of suprasalt hydrocarbon reservoirs. We use 3D seismic reflection data from the Precaspian Basin, onshore Kazakhstan to reveal the subsidence histories of 16, Upper Permian-to-Triassic, suprasalt minibasins. These minibasins subsided into a Lower-to-Middle Permian salt layer that contained numerous relatively strong, clastic-dominated minibasins encased during an earlier, latest Permian phase of diapirism; because of this, the salt varied in thickness. Suprasalt minibasins contain a stratigraphic record of symmetric (bowl-shaped units) and then asymmetric (wedge-shaped units) subsidence, with this change in style seemingly occurring at different times in different minibasins, and most likely prior to welding. We complement our observations from natural minibasins in the Precaspian Basin with results arising from new physical sandbox models; this allows us to explore the potential controls on minibasin subsidence patterns, before assessing which of these might be applicable to our natural example. We conclude that due to uncertainties in the original spatial relationships between encased and suprasalt minibasins, and the timing of changes in style of subsidence between individual minibasins, it is unclear why such complex temporal and spatial variations in subsidence occur in the Precaspian Basin. Regardless of what controls the observed variability, we argue that vertical changes in minibasin stratigraphic architecture may not record the initial (depositional) thickness of underlying salt or the timing of salt welding; this latter point is critical when attempting to constrain the timing of potential hydraulic communication between sub-salt source rocks and suprasalt reservoirs. Furthermore, temporal changes in minibasin subsidence style will likely control suprasalt reservoir distribution and trapping style.     

Architecture of the evaporite accumulation and salt structures dynamics in Tiddlybanken Basin,southeastern Norwegian Barents Sea

An extensive, reprocessed two‐dimensional (2D) seismic data set was utilized together with available well data to study the Tiddlybanken Basin in the southeastern Norwegian Barents Sea, which is revealed to be an excellent example of base salt rift structures, evaporite accumulations and evolution of salt structures. Late Devonian–early Carboniferous NE‐SW regional extensional stress affected the study area and gave rise to three half‐grabens that are separated by a NW‐SE to NNW‐SSE trending horst and an affiliated interference transfer zone. The arcuate nature of the horst is believed to be the effect of pre‐existing Timanian basement grain, whereas the interference zone formed due to the combined effect of a Timanian (basement) lineament and the geometrical arrangement of the opposing master faults. The interference transfer zone acted as a physical barrier, controlling the facies distribution and sedimentary thickness of three‐layered evaporitic sequences (LES). During the late Triassic, the northwestern part of a salt wall was developed due to passive diapirism and its evolution was influenced by halite lithology between the three‐LES. The central and southeastern parts of the salt wall did not progress beyond the pedestal stage due to lack of halite in the deepest evaporitic sequence. During the Triassic–Jurassic transition, far‐field stresses from the Novaya Zemlya fold‐and‐thrust belt reactivated the pre‐salt Carboniferous rift structures. The reactivation led to the development of the Signalhorn Dome, rejuvenated the northwestern part of the salt wall and affected the sedimentation rates in the southeastern broad basin. The salt wall together with the Signalhorn Dome and the Carboniferous pre‐salt structures were again reactivated during post‐Early Cretaceous, in response to regional compressional stresses. During this main tectonic inversion phase, the northwestern and southeastern parts of the salt wall were rejuvenated; however, salt reactivation was minimized towards the interference transfer zone beneath the centre of the salt wall.     

Minibasin depocentre migration during diachronous salt welding,offshore Angola

Salt tectonics is an important part of the geological evolution of many continental margins, yet the four-dimensional evolution of the minibasins, the fundamental building block of these and many other salt basins, remains poorly understood. Using high-quality 3D seismic data from the Lower Congo Basin, offshore Angola we document the long-term (>70 Myr) dynamics of minibasin subsidence. We show that, during the Albian, a broadly tabular layer of carbonate was deposited prior to substantial salt flow, diapirism, and minibasin formation. We identify four subsequent stages of salt-tectonics and related minibasin evolution: (i) thin-skinned extension (Cenomanian to Coniacian) driven by basinward tilting of the salt layer, resulting in the formation of low-displacement normal faults and related salt rollers. During this stage, local salt welding led to the along-strike migration of fault-bound depocentres; (ii) salt welding below the eastern part of the minibasin (Santonian to Paleocene), causing a westward shift in depocentre location; (iii) welding below the minibasin centre (Eocene to Oligocene), resulting in the formation of a turtle and an abrupt shift of depocentres towards the flanks of the bounding salt walls; and (iv) an eastward shift in depocentre location due to regional tilting, contraction, and diapir squeezing (Miocene to Holocene). Our study shows that salt welding and subsequent contraction are key controls on minibasin geometry, subsidence and stratigraphic patterns. In particular, we show how salt welding is a protracted process, spanning > 70 Myr of the salt-tectonic history of this, and likely other salt-rich basins. The progressive migration of minibasin depocentres, and the associated stratigraphic architecture, record weld dynamics. Our study has implications for the tectono-stratigraphic evolution of minibasins.     

Continental margin syn‐rift salt tectonics at intermediate width margins

This paper examines interactions among syn‐rift continental margin extension, evaporites, particularly rocksalt (halite), deposited in the overlying sedimentary basins, and clastic sediment loading. We present dynamically evolving 2D numerical models that combine syn‐rift lithospheric extension, with salt (viscous halite, 10¹⁸–10¹⁹ Pa s) and clastic (frictional‐plastic) sediment deposition to investigate how salt is distributed and subsequently mobilized during syn‐rift extension. Example results are shown, contrasting salt deposition in the early, mid and late syn‐rift phases of a single lithospheric extension model. The lithospheric model is chosen to give depth‐dependent extension and intermediate width margins with proximal grabens and a hyperextended distal region. The models exhibit diachronous migration of extension towards the rift axis and this is reflected in the faulting of overlying sediments. The models illustrate the roles of timing of salt deposition, relative to rifting and subsequent sedimentation, in defining the location and deformation of syn‐rift salt, with post‐salt sediment progradation in some models. Late deposition of salt leads to increased lateral extent of the original salt body and decreased variation in salt thickness. Seaward flow of salt increases with later deposition; early syn‐rift salt is deposited and trapped in the grabens, whereas mid and late syn‐rift salt tends to flow towards the distal margin or even over the oceanic crust. Prograding clastic post‐salt sediments drive more substantial seaward movement of mid and late syn‐rift salt. A numerical model of the Red Sea with evaporite deposition during the mid to late syn‐rift period, preceded and followed by aggrading and prograding clastic sediment, shows reasonable agreement with observations from the central Red Sea.     

Between plate and salt tectonics—New stratigraphic constraints on the architecture and timing of the Dead Sea basin during the Late Quaternary

The Dead Sea is an extensional basin developing along a transform fault plate boundary. It is also a terminal salt basin. Without knowledge of precise stratigraphy, it is difficult to differentiate between the role of plate and salt tectonics on sedimentary accumulation and deformation patterns. While the environmental conditions responsible for sediment supply are reasonably constrained by previous studies on the lake margins, the current study focuses on deciphering the detailed stratigraphy across the entire northern Dead Sea basin as well as syn and post-depositional processes. The sedimentary architecture of the late Quaternary lacustrine succession was examined by integrating 851 km of seismic reflection data from three surveys with gamma ray and velocity logs and the stratigraphic division from an ICDP borehole cored in 2010. This allowed seismic interpretation to be anchored in time across the entire basin. Key surfaces were mapped based on borehole lithology and a newly constructed synthetic seismogram. Average interval velocities were used to calculate isopach maps and spatial and temporal sedimentation rates. Results show that the Amora Formation was deposited in a pre-existing graben bounded by two N-S trending longitudinal faults. Both faults remained active during deposition of the late Pleistocene Samra and Lisan Formations—the eastern fault continued to bound the basin while the western fault remained blind. On-going plate motion introduced a third longitudinal fault, increasing accommodation space westwards from the onset of deposition of the Samra Formation. During accumulation of these two formations, sedimentation rates were uniform over the lake and similar. High lake levels caused an increase in hydrostatic pressure. This led to salt withdrawal, which flowed to the south and southwest causing increased uplift of the Lisan and En Gedi diapirs and the formation of localized salt rim synclines. This induced local seismicity and slumping, resulting in an increased thickness of the Lisan succession within the lake relative to its margins. Sedimentation rates of the Holocene Ze'elim Fm were 4–5 times higher than before. The analysis presented here resolves central questions of spatial extent and timing of lithology, deposition rates and their variability across the basin, timing of faulting at and below the lake floor, and timing and extent of salt and plate tectonic phases and their effect on syn and post-depositional processes. Plate tectonics dictated the structure of the basin, while salt tectonics and sediment accumulation were primarily responsible for its fill architecture during the timeframe examined here.     

察尔汗盐湖矿物组合特征及其成因指示

察尔汗盐湖赋存有硫酸镁亚型和氯化物型两种水化学类型,沉积了中国最大的液体钾镁盐矿床。为解释察尔汗盐湖卤水矿床成因,拟在别勒滩、达布逊、察尔汗和霍布逊区段选择4个剖面,剖面深度在0~7 m之间,属于全新统上含盐组的上部盐层,每隔10cm进行采样,运用XRD半定量方法分析矿物组合特征。结果表明,整个湖区矿物组合由石盐、石膏、水氯镁石和碳酸盐组成,其平均含量分别为70%、4.7%、3.4%和1%;显示其矿物组合特征简单,盐层主要沉积石盐而贫石膏和碳酸盐矿物。同时,研究发现各区段石膏(硫酸盐矿物)平均含量自西向东明显下降,含镁矿物平均含量自西南向东北明显下降。结合察尔汗盐湖区卤水化学组成和水化学类型的分带,基本符合盐湖北部和东北部卤水富Ca~(2+),贫Mg~(2+)和SO_4~(2-)的沉积事实,进一步说明盐湖北部和东北部卤水和盐类沉积受具有氯化物型盐泉水的补给影响,为察尔汗盐湖混合掺杂成因提供了一定的矿物学证据。     

Event sedimentation in low‐latitude deep‐water carbonate basins,Anegada passage,northeast Caribbean

The Virgin Islands and Whiting basins in the Northeast Caribbean are deep, structurally controlled depocentres partially bound by shallow‐water carbonate platforms. Closed basins such as these are thought to document earthquake and hurricane events through the accumulation of event layers such as debris flow and turbidity current deposits and the internal deformation of deposited material. Event layers in the Virgin Islands and Whiting basins are predominantly thin and discontinuous, containing varying amounts of reef‐ and slope‐derived material. Three turbidites/sandy intervals in the upper 2 m of sediment in the eastern Virgin Islands Basin were deposited between ca. 2000 and 13 600 years ago, but do not extend across the basin. In the central and western Virgin Islands Basin, a structureless clay‐rich interval is interpreted to be a unifite. Within the Whiting Basin, several discontinuous turbidites and other sand‐rich intervals are primarily deposited in base of slope fans. The youngest of these turbidites is ca. 2600 years old. Sediment accumulation in these basins is low (<0.1 mm year^?1) for basin adjacent to carbonate platform, possibly due to limited sediment input during highstand sea‐level conditions, sediment trapping and/or cohesive basin walls. We find no evidence of recent sediment transport (turbidites or debris flows) or sediment deformation that can be attributed to the ca. M7.2 1867 Virgin Islands earthquake whose epicentre was located on the north wall of the Virgin Islands Basin or to recent hurricanes that have impacted the region. The lack of significant appreciable pebble or greater size carbonate material in any of the available cores suggests that submarine landslide and basin‐wide blocky debris flows have not been a significant mechanism of basin margin modification in the last several thousand years. Thus, basins such as those described here may be poor recorders of past natural hazards, but may provide a long‐term record of past oceanographic conditions in ocean passages.     

Spatial and temporal variations in minibasin geometry and evolution in salt tectonic provinces: Lower Congo Basin,offshore Angola

In passive margin salt basins, the distinct kinematic domains of thin‐skinned extension, translation and contraction exert important controls on minibasin evolution. However, the relationship between various salt minibasin geometries and kinematic domain evolution is not clear. In this study, we use a semi‐regional 3D seismic reflection dataset from the Lower Congo Basin, offshore Angola, to investigate the evolution of a network of minibasins and intervening salt walls during thin‐skinned, gravity‐driven salt flow. Widespread thin‐skinned extension occurred during the Cenomanian to Coniacian, accommodated by numerous distributed normal faults that are typically 5–10 km long and spaced 1–4 km across strike within the supra‐salt cover. Subsequently, during the Santonian–Paleocene, multiple, 10–25 km long, 5–7 km wide depocentres progressively grew and linked along strike to form elongate minibasins separated by salt walls of comparable lengths. Simultaneous with the development of the minibasins, thin‐skinned contractional deformation occurred in the southwestern downslope part of the study area, forming folds and thrusts that are up to 20 km long and have a wavelength of 2–4 km. The elongate minibasins evolved into turtle structures during the Eocene to Oligocene. From the Miocene onwards, contraction of the supra‐salt cover caused squeezing and uplift of the salt walls, further confining the minibasin depocentres. We find kinematic domains of extension, translation and contraction control the minibasin initiation and subsequent evolution. However, we also observe variations in minibasin geometries associated with along‐strike growth and linkage of depocentres. Neighbouring minibasins may have different subsidence rates and maturity leading to marked variations in their geometry. Additionally, migration of the contractional domain upslope and multiple phases of thin‐skinned salt tectonics further complicates the spatial variations in minibasin geometry and evolution. This study suggests that minibasin growth is more variable and complex than existing domain‐controlled models would suggest.     

Salt tectonics in a double salt‐source layer setting (Eastern Persian Gulf,Iran): Insights from interpretation of seismic profiles and sequential cross‐section restoration

Salt tectonics in the Eastern Persian Gulf (Iran) is linked to a unique salt‐bearing system involving two overlapping ‘autochthonous’ mobile source layers, the Ediacaran–Early Cambrian Hormuz Salt and the Late Oligocene–Early Miocene Fars Salt. Interpretations of reflection seismic profiles and sequential cross‐section restorations are presented to decipher the evolution of salt structures from the two source layers and their kinematic interaction on the style of salt flow. Seismic interpretations illustrate that the Hormuz and Fars salts started flowing in the Early Palaeozoic (likely Cambrian) and Early Miocene, respectively, shortly after their deposition. Differential sedimentary loading (downbuilding) and subsalt basement faults initiated and localized the flow of the Hormuz Salt and the related salt structures. The resultant diapirs grew by passive diapirism until Late Cretaceous, whereas the pillows became inactive during the Mesozoic after a progressive decline of growth in the Late Palaeozoic. The diapirs and pillows were then subjected to a Palaeocene–Eocene contractional deformation event, which squeezed the diapirs. The consequence was significant salt extrusion, leading to the development of allochthonous salt sheets and wings. Subsequent rise of the Hormuz Salt occurred in wider salt stocks and secondary salt walls by coeval passive diapirism and tectonic shortening since Late Oligocene. Evacuation and diapirism of the Fars Salt was driven mainly by differential sedimentary loading in annular and elongate minibasins overlying the salt and locally by downslope gliding around pre‐existing stocks of the Hormuz Salt. At earlier stages, the Fars Salt flowed not only towards the pre‐existing Hormuz stocks but also away from them to initiate ring‐like salt walls and anticlines around some of the stocks. Subsequently, once primary welds developed around these stocks, the Fars Salt flowed outwards to source the peripheral salt walls. Our results reveal that evolving pre‐existing salt structures from an older source layer have triggered the flow of a younger salt layer and controlled the resulting salt structures. This interaction complicates the flow direction of the younger salt layer, the geometry and spatial distribution of its structures, as well as minibasin depocentre migration through time. Even though dealing with a unique case of two ‘autochthonous’ mobile salt layers, this work may also provide constraints on our understanding of the kinematics of salt flow and diapirism in other salt basins having significant ‘allochthonous’ salt that is coevally affected by deformation of the deeper autochthonous salt layer and related structures.