The deformation and recrystallization of biotite in the Woodroffe Thrust mylonite zone

The deformation and recrystallization microstructures in biotite from the Woodroffe Thrust mylonites are described and interpreted. The degree of strain causing recrystallization and the nucleation mechanisms differ across the mylonite zone. These differences are associated with the contrast in water content between the granulite and amphibolite facies felsic gneisses on either side of the zone. p]In moderately mylonitized granulite facies felsic gneisses (0.1–0.6% H₂O) subgrains form in intensely deformed host biotite and recrystallization mechanisms involve subgrain rotation both on host grain boundaries and associated with kink band bulge. In the amphibolite facies felsic gneisses (0.9–1.2% H₂O) the biotite recrystallizes by a mechanism involving localized internal kinking of the host and subsequent migration of high angle boundaries generated on the kink limbs. This combined with rotation due to the concurrent deformation generates high angle grain boundaries around the entire original kink limb and thus a new grain.     

Dehydration melting and the granulite transition in metapelites from southern Namaqualand,S. Africa

In a prograde amphibolite-granulite transition zone in the Namaqualand Metamorphic Complex, metapelites show an interbanding of the amphibolite facies association biotite+sillimanite+quartz with the granulite facies association garnet+cordierite+K-feldspar. Relict graded bedding shows that compositional banding is of sedimentary origin. The garnet-cordierite-K-feldspar gneisses contain quartzofeldspathic segregations surrounding garnets, and have more Fe-rich bulk compositions than the biotite-sillimanite schists.The contrasting asemblages could have formed at the same pressure and temperature provided that a(H₂O) was systematically lower in the garnet-cordierite-K-feldspar layers. The a(H₂O) reduction resulted from the production of silicate melt by a vapour-absent continuous Fe-Mg reaction such as biotite+sillimanite+quartz=garnet+K-feldspar+liquid which affects Fe-rich compositions before vapour-absent melting occurs in more Mg-rich rocks. The segregations represent the solid and liquid products of the reaction.Such processes imply local control of a(H₂O), and indicate that this granulite transition did not result from a regional influx of metasomatising fluids.     

Long-term deformation and fluid-enhanced mass transport in a Variscan peridotite shear zone in the Ivrea Zone,northern Italy: a microtextural,petrological and geochemical study of a reactivated shear zone

The microtextural, petrological and geochemical study of a ductile shear zone in the phlogopite peridotite of Finero/Ivrea Zone (northern Italy) reveals the long-term deformation of this zone. The zone is divided into a protomylonitic and an ultramylonitic part. Both parts reflect different periods of deformation, although the orientation of the mineral lineations does not change. In the coarse-grained part (period 1) the deformation started under granulite facies conditions (about 775°C). Olivine, ortho- and clinopyroxene and phlogopite recrystallized dynamically. In the ultramylonitic part relics of the granulite facies event and evidence for a continuous or two-stage deformation history under amphibolite facies (minimum 640°C) to upper greenschist facies conditions (maximum 520°C) are preserved (period 2). Amphibolite facies conditions are indicated by olivine recrystallization, the monoclinization of orthopyroxene porphyroclasts and the recrystallization and chemical changes of clinopyroxene. The greenschist facies final stage of period 2 is characterized by decreased X _{CO 2} and the syntectonic formation of antigorite, tremolite and phlogopite at the expense of recrystallized and porphyroclastic olivine and pyroxene. Between both deformation periods a short break in deformation continuity is probable. Continuous deformation or reactivation in shear zones of the Ivrea Zone has not been described so far. During the granulite facies shearing, small amounts of channelized fluid flow led to a slight mass transfer. The shear zone shows a moderate enrichment of Na, Ba, Cu, Cs, H₂O and CO₂ and a small loss of P. The mass balance of the ultramylonite indicates a significant increase in mass transport. A mass gain can be inferred for H, Na, K, Ba, Al, Ti, P, S, Cs, Sr, Rb, C, Zn, Zr, S, Sc, light rare earth elements, Nb, Cl and Au. The zone is depleted in Ca, Cu, Co, F and Ni. Si, Mg, Cr, Mn, Y, Nb and V are constant within analytical error. Deformation and fluid infiltration led to a change in volume which increases during the granulite facies event by 5.7% and during the lower temperature phase by 3.3%. The calculated fluid to rock ratios by standard equations results in unrealistically high values. For the interpretation of highly deformed rocks with drastic grain size reduction it is therefore necessary to consider the enhanced diffusion, which is mainly controlled by the increased grain boundary surface.     

Genesis of the New Quebec and Adirondack granulites: Evidence for their production by partial melting

Materials balance calculations on amphibolite facies and granulite facies rocks from the Adirondack region and from some areas of New Quebec demonstrate that the rocks of the two facies differ by near granite-minimum melt compositions. The implication of these results are; granulites of both regions result from partial melting of greywacke-type metasedimentary rocks during upper amphibolite facies metamorphism. The New Quebec region contains granuites produced by partial melting as well as granulites produced by simple mineral dehydration reactions (no melting of the rocks occurred). These observations combined with the knowledge that some New Quebec granulites have produced abnormally high quantities of melts provide evidence that large sources and sinks for H₂O exist in the lower crust and that there is significant H₂O transport between these regions.     

Granulite facies thermal aureoles and metastable amphibolite facies assemblages adjacent to the Western Fiordland Orthogneiss in southwest Fiordland, New Zealand

In southwest New Zealand, a suite of felsic diorite intrusions known as the Western Fiordland Orthogneiss (WFO) were emplaced into the mid to deep crust and partially recrystallized to high‐P (12 kbar) granulite facies assemblages. This study focuses on the southern most pluton within the WFO suite (Malaspina Pluton) between Doubtful and Dusky sounds. New mapping shows intrusive contacts between the Malaspina Pluton and adjacent Palaeozoic metasedimentary country rocks with a thermal aureole ～200–1000 m wide adjacent to the Malaspina Pluton in the surrounding rocks. Thermobarometry on assemblages in the aureole indicates that the Malaspina Pluton intruded the adjacent amphibolite facies rocks while they were at depths of 10–14 kbar. Similar P–T conditions are recorded in high‐P granulite facies assemblages developed locally throughout the Malaspina Pluton. Palaeozoic rocks more than ～200–1000 m from the Malaspina Pluton retain medium‐P mid‐amphibolite facies assemblages, despite having been subjected to pressures of 10–14 kbar for > 5 Myr. These observations contradict previous interpretations of the WFO Malaspina Pluton as the lower plate of a metamorphic core complex, everywhere separated from the metasedimentary rocks by a regional‐scale extensional shear zone (Doubtful Sound Shear Zone). Slow reaction kinetics, lack of available H₂O, lack of widespread penetrative deformation, and cooling of the Malaspina Pluton thermal anomaly within c. 3–4 Myr likely prevented recrystallization of mid amphibolite facies assemblages outside the thermal aureole. If not for the evidence within the thermal aureole, there would be little to suggest that gneissic rocks which underlie several 100 km² of southwest New Zealand had experienced metamorphic pressures of 10–14 kbar. Similar high‐P metamorphic events may therefore be more common than presently recognized.     

Perpotassic granulites from southern Bohemia

Garnetiferous, perpotassic granulites associated with voluminous, felsic calc-alkaline garnet-kyanite granulites in the Blanský les massif are described as a new rock type. A K₂O content near 13 wt%, Zr content ranging from 17 to 5877 ppm, primary Ca-Mg-Fe garnet (pyrope up to 33 mol %), and the absence of primary plagioclase and quartz characterize the new type of granulite. Calcium is incorporated only in garnet and apatite. Owing to the content of garnet the bulk syenitic compositions are metaaluminous to peraluminous. The perpotassic granulites are accompanied by subordinated melanocratic perpotassic granulite and alkali-feldspar melanocratic granulite containing up to 20 vol % quartz. These rock types also contain highly variable amounts of zircon. High-pressure, noneutectic partial melting of crustal rocks and crystallization under upper mantle conditions is suggested as the main process in generation of perpotassic granulites. A polyphase, ductile to brittle deformation and recrystallization in pyroxene granulite and later in amphibolite facies accompanied obduction of the granulite massif which carries numerous enclaves of pyrope peridotite. Euhedral equant zircon crystals up to 4 mm long enclosed in large garnet crystals and in the alkali feldspar matrix of perpotassic granulite represent a uniform, high-temperature population with a nearly concordant U-Pb system (Aftalion et al. 1989). The Hercynian age of this zircon indicates the role of the Hercynian anatexis of crustal rocks under upper mantle conditions in generation of granulites in the Moldanubian zone of the Bohemian massif.     

Evolution of mass-transfer during progressive oblique under-thrusting of the Variscan foreland: eastern Bohemian Massif

Abstract

Four ductile shear zones were sampled in the autochthonous Thaya basement and the Upper Bíte? nappe (Moravian unit) at the Eastern margin of the Bohemian massif. In both studied units, the tectono-metamorphic evolution and the chemical mass transfer are different. Two deformational events are recognised: the first deformation stage under amphibolite facies conditions is overprinted by a second event under greenschist facies conditions.

The first deformation affected the western margin of the Thaya basement and the whole Bíte? nappe: microstructures are characterised by dynamic recrystallisation of feldspars and quartz, and occurrence of myrmekites and grain-boundary migration of quartz. None or weak chemical mass transfer is related to this medium to high temperature deformation. This deformation corresponds to the thrusting of Moldanubdian units on the Brunovistulian units (Moravian nappes and autochthonous Thaya basement).

The second deformation generated shear zones in the until then preserved Thaya basement and reactivated both shear zones of the western margin of the Thaya basement and those of the Bíte? nappe. This deformation is retrograde and mainly associated with chemical mass transfer: a decrease of CaO, FeO, FeO/Fe₂O₃ and an increase of MgO, K₂O and H₂O. These chemical changes are related to greenschist metamorphic reactions leading to the destabilisation of feldspars and the crystallisation of white micas and Ca-silicates. The large chemical mass transfer is associated with the circulation of a large volume of fluids. A model of progressive fluid circulation correlated with Variscan prograde and retrograde metamorphism during the collision of Moldanubian and Brunovistulian units is proposed.     

The effect of deformation on the TitaniQ geothermobarometer: an experimental study

We performed high strain (up to 47 %) axial compression experiments on natural quartz single crystals with added rutile powder (TiO₂) and ~0.2 wt% H₂O to investigate the effects of deformation on the titanium-in-quartz (TitaniQ) geothermobarometer. One of the objectives was to study the relationships between different deformation mechanisms and incorporation of Ti into recrystallized quartz grains. Experiments were performed in a Griggs-type solid-medium deformation apparatus at confining pressures of 1.0–1.5 GPa and temperatures of 800–1,000 °C, at constant strain rates of 1 × 10^?6 or 1 × 10^?7 s^?1. Mobility of Ti in the fluid phase and saturation of rutile at grain boundaries during the deformation experiments are indicated by precipitation of secondary rutile in cracks and along the grain boundaries of newly recrystallized quartz grains. Microstructural analysis by light and scanning electron microscopy (the latter including electron backscatter diffraction mapping of grain misorientations) shows that the strongly deformed quartz single crystals contain a wide variety of deformation microstructures and shows evidence for subgrain rotation (SGR) and grain boundary migration recrystallization (GBMR). In addition, substantial grain growth occurred in annealing experiments after deformation. The GBMR and grain growth are evidence of moving grain boundaries, a microstructure favored by high temperatures. Electron microprobe analysis shows no significant increase in Ti content in recrystallized quartz grains formed by SGR or by GBMR, nor in grains grown by annealing. This result indicates that neither SGR nor moving grain boundaries during GBMR and grain growth are adequate processes to facilitate re-equilibration of the Ti content in experimentally deformed quartz crystals at the investigated conditions. More generally, our results suggest that exchange of Ti in quartz at low H₂O contents (which may be realistic for natural deformation conditions) is still not fully understood. Thus, the application of the TitaniQ geothermobarometer to deformed metamorphic rocks at low fluid contents may not be as straightforward as previously thought and requires further research.     

An example of structural and metamorphic relationships in the Musgrave orogenic belt,central Australia

The western Musgrave Ranges are broadly divided into three groups of metamorphic rocks. A central granulite‐facies core is bounded on the north by rocks of amphibolite grade and on the south by rocks transitional between the granulite and amphibolite facies. Faults trending east‐west separate the three groups of rocks.

The detailed structural relationships between the granulites and the lower grade rocks are described and discussed. The granulites are structurally relatively simple and are characterised by the presence of a strong southwesterly‐plunging, mineral‐streaking lineation. In marked contrast, the transitional rocks are more complexly folded on a macroscopic scale and they also have a well‐developed mineral lineation plunging to the southeast. These two lineation orientations are considered to be directions of maximum elongation. The amphibolite‐facies rocks are also complexly folded and at least two lineations related to different phases of deformation have been recognized.

A suite of foliated and lineated dolerite dykes which occurs throughout the area inherited their fabric during a period of intense deformation and recrystallization, which resulted in the development of numerous mylonite zones.

It is suggested that the granulite‐facies rocks may represent a suite of cover rocks which have been thrust in a northerly direction over a pre‐existing amphibolite‐facies basement.     

Melt loss and the preservation of granulite facies mineral assemblages

The loss of a metamorphic fluid via the partitioning of H₂O into silicate melt at higher metamorphic grade implies that, in the absence of open system behaviour of melt, the amount of H₂O contained within rocks remains constant at temperatures above the solidus. Thus, granulite facies rocks, composed of predominantly anhydrous minerals and a hydrous silicate melt should undergo considerable retrogression to hydrous upper amphibolite facies assemblages on cooling as the melt crystallizes and releases its H₂O. The common occurrence of weakly retrogressed granulite facies assemblages is consistent with substantial melt loss from the majority of granulite facies rocks. Phase diagram modelling of the effects of melt loss in hypothetical aluminous and subaluminous metapelitic compositions shows that the amount of melt that has to be removed from a rock to preserve a granulite facies assemblage varies markedly with rock composition, the number of partial melt loss events and the P–T conditions at which melt loss occurs. In an aluminous metapelite, the removal of nearly all of the melt at temperatures above the breakdown of biotite is required for the preservation of the peak mineral assemblage. In contrast, the proportion of melt loss required to preserve peak assemblages in a subaluminous metapelite is close to half that required for the aluminous metapelite. Thus, if a given proportion of melt is removed from a sequence of metapelitic granulites of varying composition, the degree of preservation of the peak metamorphic assemblage may vary widely.     

Kinematic and rheological model of exhumation of high pressure granulites in the Variscan orogenic root: example of the Blanský les granulite, Bohemian Massif, Czech Republic

Summary A large-scale relict domain of granulite facies deformation fabrics has been identified within the Blansky les granulite body. The granulite facies mylonitic fabric is discordant to the dominant amphibolite facies structures of the surrounding retrograde granulite. The complex geometry of retrograde amphibolite facies fabric indicates a large-scale fold-like structure, which is interpreted to be a result of either crustal-scale buckling of an already exhumed granulite sheet or active rotation of a rigid granulite facies ellipsoidal domain in kinematic continuity with the regional amphibolite facies deformation. We argue that both concepts allow similar restoration of the original granulite facies fabrics prior to the amphibolite facies deformation and “folding”. The geometry of the granulite facies foliations coincides with the earliest fabrics in the nearby mid-crustal units suggesting complete mechanical coupling between the deep lower crust and the mid-crustal levels during the vertical movements of crustal materials. Microstructures indicate grain-size sensitive flow enhanced by the presence of silicate melts at deep crustal levels and a beginning of an exhumation process of low viscosity granulites through a vertical channel. The amphibolite facies fabrics developed at middle crustal levels and their microstructures indicate significant hardening of feldspar-made rigid skeleton of the retrograde granulite. Increase in the strength of the granulite allowed an active buckling or a rigid body rotation of the granulite sheet, which acted as a strong layer inside the weaker metasediments.     

Decompressed eclogites in the Sveconorwegian (–Grenvillian) orogen of SW Sweden: petrology and tectonic implications

Relict eclogites and associated high-pressure rocks are present in the Eastern Segment of the SW Swedish gneiss region (the tectonic counterpart of the Parautochthonous Belt of the Canadian Grenville). These rocks give evidence of Sveconorwegian eclogite facies metamorphism and subsequent pervasive reworking and deformation at granulite and amphibolite facies conditions. The best-preserved eclogite relics suggest a clockwise P–T –t history, beginning in the amphibolite facies, progressing through the eclogite facies, decompressing and partially reequilibrating through the high- and medium-pressure granulite facies, before cooling through the amphibolite facies. Textures demonstrate the former coexistence of the plagioclase-free assemblages garnet+clinopyroxene+quartz+rutile+ilmenite, garnet+clinopyroxene+ kyanite+rutile, and garnet+kyanite+quartz+rutile. The former existence of omphacite is evidenced by up to 45 vol.% plagioclase expelled as small grains within large clinopyroxene. Matrix plagioclase is secondary and occurs expelled from clinopyroxene or in fine-grained, granulite facies reaction domains formed during resorption of garnet and kyanite. Garnet shows preserved prograde growth zoning with rimward increasing pyrope content, decreasing spessartine content and decreasing Fe/(Fe+Mg) ratio, but is partly resorbed and reequilibrated at the rims. P–T estimates from microdomains with clinopyroxene+plagioclase+quartz+garnet indicate pressures of 9.5–12 kbar and temperatures of 705–795 °C for a stage of the granulite facies decompression. The preservation of the prograde zoning suggests that the rocks did not reside at these high temperatures for more than a few million years, and chemical disequilibrium and ‘frozen’ reaction textures indicate heterogeneous reaction progress and overstepping of reactions during the decompression through the granulite facies. Together these features suggest a rapid tectonic exhumation. The eclogite relics occur within a high-grade deformation zone with WNW–ESE stretching and associated oblique normal-sense, top-to-the-east (sensu lato) displacement, suggesting that extension was a main cause for the decompression and exhumation. Probable tectonic scenarios for this deformation are Sveconorwegian late-orogenic gravitational collapse or overall WNW–ESE extension.     

Metamorphic evolution of exhumed middle to lower crustal rocks in the Mojave Extensional Belt, southern California, USA

The Waterman Metamorphic Complex of the central Mojave Desert was exposed as a consequence of early Miocene detachment-dominated extension. However, it has evidence consistent with a more extensive geological history that involves collision of a crustal fragment(s), tectonic thickening by overthrusting and two periods of extension. The metamorphic complex contains granitoid intrusives and felsic mylonitic gneisses as well as polymetamorphic rocks that include marble, calc-silicate, quartzite. mafic granulite, pyribolite, amphibolite, migmatite and biotite schist. The latter group of rocks was affected by an initial series of high-grade metamorphic events (M1 and M2) and a localized lower grade overprint (M3). The initial metamorphism (M1) can be separated into two stages along its high-grade P–T path: M1a, a granulite facies metamorphism at 800–850° C and 7.5–9 kbar and Mlb, an upper amphibolite facies overprint at 750–800° C and 10–12 kbar. M1a developed mineral assemblages and textures consistent with granulite facies conditions at a reduced activity of H₂O and is associated with intense ductile deformation (D1) and minor local partial melting. M1b overprinted the granulite assemblages with a series of hydrous phases under conditions of increasing pressure and H₂O activity and is accompanied by little or no deformation. M2 developed at lower pressures and temperatures (650–750° C, 4.5–5.5 kbar) and is distinguished by a second local overprint of hydrous phases that reflects an input of aqueous fluids probably associated with the intrusion of a series of granitic dykes and veins. Effects of M3 are confined to the Mitchel detachment zone, an anastomosing early Miocene detachment fault, and are characterized by local ductile/brittle deformation (D2) of the pre-existing high-grade rocks and granitoid intrusives and by the production of mylonites and mylonitic gneisses under greenschist facies conditions (300–350° C, 3–5 kbar). The initial overprint (M1a) represents metamorphism, devolatilization and minor partial melting of supracrustal rocks under granulite facies conditions as a consequence of tectonic and, possibly, magmatic thickening. The increasing pressure transition of M1a to M1b reflects a period of continued compressional tectonism, thrusting and influx of H₂O, in part, locally related to crystallization of partial melts. The near isothermal decompression between M1b and M2 probably represents a pre-112-Ma extensional episode that may have been the result of a decompressional readjustment of a thickened crust. Following the initial extensional event, the metamorphic complex remained at depths of 10–17 km for at least 90 Ma until it was uplifted following Miocene extension. M3 develops locally in response to this second extensional period resulting from the early Miocene detachment faulting.     

Intermediate granulite produced by transformation of eclogite at a felsic granulite contact,in Blanský les,Bohemian Massif

Layers or bodies of intermediate granulite on scales from a centimetre to a hundred metres occur commonly within the felsic granulite massifs of the Bohemian Massif. Their origin is enigmatic in that they commonly have complex microstructures that are difficult to interpret, and therefore even the sequence of crystallization of minerals is uncertain. At Kle?, in the Blanský les massif, there is a revealing outcrop in a low‐strain zone in which it is clear that intermediate granulite can form by the interaction of felsic granulite with eclogite. The eclogite, retains garnet from its eclogite heritage, the grains at least partially isolated from the matrix by a plagioclase corona. The original omphacite‐dominated matrix of the eclogite now consists of recrystallized diopsidic clinopyroxene, orthopyroxene and plagioclase, with minor brown amphibole and quartz. The modification of the eclogite is dominated by the addition of just K₂O and H₂O, rather than all the elements that would be involved if the process was one of pervasive melt infiltrations. This suggests that the main process involved is diffusion, with the source being the felsic granulite, or local partial melt of the granulite. The diffusion occurred at ~950 °C and 12 kbar, with the main observed effects being (i) the un‐isolation and preferential destruction of the interior part of some of the garnet grains by large idiomorphic ternary feldspar; (ii) textural modification of the matrix primarily involving the recrystallization of clinopyroxene into large poikiloblasts containing inclusions of ternary plagioclase; and (iii) conversion of low‐K plagioclase in the matrix into ternary feldspar by incorporation of the diffused‐in K₂O. The phase equilibria in the intermediate granulite are consistent with the chemical potential relationships that would be superimposed on the original eclogite by the felsic granulite at 950 °C and 12 kbar.     

Initiation and development of the Twelve Mile Bay shear zone: the low viscosity sole of a granulite nappe

Structural, microstructural and petrological data have enabled determination of the mechanical and geochemical processes involved in dynamic weakening and fabric transposition along the margins of a granulite nappe [the Parry Sound domain (PSD)] during transport to mid‐crustal levels of the Grenville Orogen. The data establish a genetic link between outcrop‐scale structures in the southern PSD and the development of the underlying Twelve Mile Bay shear zone (TMBSZ). Following granulite facies metamorphism (～11 kbar/～850 °C) in the southern PSD, the emplacement of pegmatite dykes resulted in hydration reactions within adjacent wall rocks and the development of thin (<1 m) amphibolite facies (～6.5 kbar/～700 °C) shear zones. The shear zones exhibit bulk H₂O and K₂O enrichment and oxygen isotope values similar to the adjacent pegmatites, suggesting metasomatic alteration by pegmatite‐derived fluids. Phase‐equilibrium models indicate that the destabilization of the pre‐existing pyroxene and garnet‐bearing assemblages, as observed within discrete shear zones in the southern PSD and the TMBSZ, requires H₂O‐saturated conditions at these (amphibolite facies) P–T conditions. The spacing between discrete shear zones and the depth of hydration into the adjacent wall rock are of comparable length‐scales (～metres), suggesting that this type of reworking process can be an effective means of hydrating kilometre‐scale areas of crust relatively rapidly. Furthermore, considering the well‐established effects of hydrous fluids on the creep strength of anhydrous minerals, a fracture‐initiated, localized hydration‐and‐shearing process may be an efficient mechanism for weakening strong, dry rocks (e.g. granulites) in the middle to lower orogenic crust.     

Anatexis and fluid regime of the deep continental crust: New clues from melt and fluid inclusions in metapelitic migmatites from Ivrea Zone (NW Italy)

We investigate the inclusions hosted in peritectic garnet from metapelitic migmatites of the Kinzigite Formation (Ivrea Zone, NW Italy) to evaluate the starting composition of the anatectic melt and fluid regime during anatexis throughout the upper amphibolite facies, transition, and granulite facies zones. Inclusions have negative crystal shapes, sizes from 2 to 10 μm and are regularly distributed in the core of the garnet. Microstructural and micro‐Raman investigations indicate the presence of two types of inclusions: crystallized silicate melt inclusions (i.e., nanogranitoids, NI), and fluid inclusions (FI). Microstructural evidence suggests that FI and NI coexist in the same cluster and are primary (i.e., were trapped simultaneously during garnet growth). FI have similar compositions in the three zones and comprise variable proportions of CO₂, CH₄, and N₂, commonly with siderite, pyrophyllite, and kaolinite, suggesting a COHN composition of the trapped fluid. The mineral assemblage in the NI contains K‐feldspar, plagioclase, quartz, biotite, muscovite, chlorite, graphite and, rarely, calcite. Polymorphs such as kumdykolite, cristobalite, tridymite, and less commonly kokchetavite, were also found. Rehomogenized NI from the different zones show that all the melts are leucogranitic but have slightly different compositions. In samples from the upper amphibolite facies, melts are less mafic (FeO + MgO = 2.0–3.4 wt%), contain 860–1700 ppm CO₂ and reach the highest H₂O contents (6.5–10 wt%). In the transition zone melts have intermediate H₂O (4.8–8.5 wt%), CO₂ (457–1534 ppm) and maficity (FeO + MgO = 2.3–3.9 wt%). In contrast, melts at granulite facies reach highest CaO, FeO + MgO (3.2–4.7 wt%), and CO₂ (up to 2,400 ppm), with H₂O contents comparable (5.4–8.3 wt%) to the other two zones. Our results represent the first clear evidence for carbonic fluid‐present melting in the Ivrea Zone. Anatexis of metapelites occurred through muscovite and biotite breakdown melting in the presence of a COH fluid, in a situation of fluid–melt immiscibility. The fluid is assumed to have been internally derived, produced initially by devolatilization of hydrous silicates in the graphitic protolith, then as a result of oxidation of carbon by consumption of Fe³⁺‐bearing biotite during melting. Variations in the compositions of the melts are interpreted to result from higher T of melting. The H₂O contents of the melts throughout the three zones are higher than usually assumed for initial H₂O contents of anatectic melts. The CO₂ contents are highest at granulite facies, and show that carbon‐contents of crustal magmas are not negligible at high T. The activity of H₂O of the fluid dissolved in granitic melts decreases with increasing metamorphic grade. Carbonic fluid‐present melting of the deep continental crust represents, together with hydrate‐breakdown melting reactions, an important process in the origin of crustal anatectic granitoids.     

Oxide and sulphide isograds along a Late Archean, deep-crustal profile in Tamil Nadu, south India

Oxide–sulphide–Fe–Mg–silicate and titanite–ilmenite textures as well as their mineral compositions have been studied in felsic and intermediate orthogneisses across an amphibolite (north) to granulite facies (south) traverse of lower Archean crust, Tamil Nadu, south India. Titanite is limited to the amphibolite facies terrane where it rims ilmenite or occurs as independent grains. Pyrite is widespread throughout the traverse increasing in abundance with increasing metamorphic grade. Pyrrhotite is confined to the high‐grade granulites. Ilmenite is widespread throughout the traverse increasing in abundance with increasing metamorphic grade and occurring primarily as hemo‐ilmenite in the high‐grade granulite facies rocks. Magnetite is widespread throughout the traverse and is commonly associated with ilmenite. It decreases in abundance with increasing metamorphic grade. In the granulite facies zone, reaction rims of magnetite + quartz occur along Fe–Mg silicate grain boundaries. Magnetite also commonly rims or is associated with pyrite. Both types of reaction rims represent an oxidation effect resulting from the partial subsolidus reduction of the hematite component in ilmenite to magnetite. This is confirmed by the presence of composite three oxide grains consisting of hematite, magnetite and ilmenite. Magnetite and magnetite–pyrite micro‐veins along silicate grain boundaries formed over a wide range of post‐peak metamorphic temperatures and pressures ranging from high‐grade SO₂ to low‐grade H₂S‐dominated conditions. Oxygen fugacities estimated from the orthopyroxene–magnetite–quartz, orthopyroxene–hematite–quartz, and magnetite–hematite buffers average 2.5 log units above QFM. It is proposed that the trends in mineral assemblages, textures and composition are the result of an external, infiltrating concentrated brine containing an oxidizing component such as CaSO₄ during high‐grade metamorphism later acted upon by prograde and retrograde mineral reactions that do not involve an externally derived fluid phase.     

Superposed deformation and inherited structures in an ancient dilational step-over zone: Post-mortem of the Rengali Province,India

In the eastern Indian shield, a dextral strike-slip system juxtaposed the Archaean Singhbhum Province against the Proterozoic Eastern Ghats Belt at ∼490–470 Ma. Two WNW–ESE trending strands of the strike-slip system enclose a multiply deformed (D₁ to D₃) intervening domain called the Rengali Province, with D₃ representing dextral shearing. In a granulite lens within the province, an early fabric (S_gr) was deformed by an amphibolite facies D₁–D₂ deformation continuum in the late Archaean time, forming cylindrical folds. In the surrounding quartzofeldspathic gneisses, quartzites and mica schists of the province, superimposition of syn-D₃ shortening on D₁-D₂ folds generated complex non-cylindrical geometries; the granulites escaped D₃ strain. Microstructures in the province-bounding shear zones confirm that D₃ deformation was associated with mylonitization, dynamic recrystallization and greenschist facies metamorphism. In the quartzites, syn-D₃ folds can be correlated with rotation of D₁–D₂ structures through the shortening zone of bounding dextral shears. Since the province-bounding shears form a step-over zone, the structural complexity within the Rengali Province arises from superposition of syn-D₃ shortening structures on initially asympathetically oriented inherited cylindrical D₁-D₂ folds. Hydrous fluid channeling causing greenschist facies metamorphism and quartz vein emplacement accompanied D₃ as the step-over zone was dilational in nature.     

Le facies granulite en norvege meridionale: I. Les associations minéralogiques

The basement of Southern Norway is a genetically homogeneous migmatite complex in which old supracrustals produced granitic and granodioritic ‘neosome’ during a late Precambrian (10⁹ years ago) regional metamorphism. Observed isograds of critical minerals: muscovite, cordierite, orthopyroxene indicate that the Telemark amphibolite facies in the North passes into the coastal Bamble granulite facies in the South. The data of expeimental petrology suggest that the transition, which took place at temperatures of 700–800°C, is essentially due to a decrease of the partial water pressure. P_H2O was equal to total pressure P_s in the amphibolite facies and lower than 2 kb in the granulite facies.     

Fluid inclusion geochemistry of the early Proterozoic Pirilä gold deposit in Rantasalmi,Southeastern Finland

The small Pirilä gold deposit, which is located in the southeastern part of the Svecofennian complex near the Archean/Proterozoic boundary, is hosted by quartz veins and lenses occurring in mica schist. The rocks of the area were metamorphosed under conditions of amphibolite facies. Gold is invariably associated with sulphides. Microthermometry of fluid inclusions in quartz indicates four types of inclusions: (1) weakly saline H₂O-CO₂ (< 4.0 eq.wt% NaCl) with small amounts of CH₄ (< 10 mole% CH₄); (2) CO₂ (< 10 mole% CH₄); (3) CH₄; and (4) H₂O (< 25 eq.wt% NaCl) with less than 0.85 mole% CO₂ in the vapour phase. Texturally these inclusion types are classified as primary (H₂O-CO₂) and secondary (H₂O, CO₂ and CH₄). Leachate analysis shows that, in addition to Na, the aqueous fluids contain Ca and Fe with minor amounts of K and Mg. The primary H₂O-CO₂ and the secondary H₂O inclusions contain sulphide and unidentified opaque grains, respectively. The secondary CH₄ inclusions are often associated with short trails of arsenopyrite grains. Fluid inclusion and geological data suggest ore mineral mobilization, crystallization of host quartz, and deposition of sulphides controlled by the D₂ and D₃ structures in the presence of a H₂O-CO₂ fluid mainly during the plastic D₃ deformation and during the amphibolite facies metamorphism (i.e. 3.4 kbars/540–670°C). During ductile-brittle deformation (probably D₄), precipitation of tectonic remobilized gold from sulphides in fractures occurred in the presence of CH₄ and H₂O fluids at lowered temperature (< 440°C) and pressure (< 2 kbars).