Using time‐domain reflectometry to characterize shallow solute transport in an oak woodland hillslope in northern California,USA

The natural heterogeneity of water and solute movement in hillslope soils makes it difficult to accurately characterize the transport of surface‐applied pollutants without first gathering spatially distributed hydrological data. This study examined the application of time‐domain reflectometry (TDR) to measure solute transport in hillslopes. Three different plot designs were used to examine the transport of a conservative tracer in the first 50 cm of a moderately sloping soil. In the first plot, which was designed to examine spatial variability in vertical transport in a 1·2 m² plot, a single probe per meter was found to adequately characterize vertical solute travel times. In addition, a dye and excavation study in this plot revealed lateral preferential flow in small macropores and a transport pattern where solute is focused vertically into preferential flow pathways. The bypass flow delivers solute deeper in the soil, where lateral flow occurs. The second plot, designed to capture both vertical and lateral flow, provided additional evidence confirming the flow patterns identified in the excavation of the first plot. The third plot was designed to examine lateral flow and once again preferential flow of the tracer was observed. In one instance rapid solute transport in this plot was estimated to occur in as little as 3% of the available pore space. Finally, it was demonstrated that the soil anisotropy, although partially responsible for lateral subsurface transport, may also homogenize the transport response across the hillslope by decreasing vertical solute spreading. Copyright © 2002 John Wiley & Sons, Ltd.     

Water and solute movement in a coarse-textured water-repellent field soil

Unstable water flow in water-repellent unsaturated soils can significantly affect the processes of infiltration and soil water redistribution. A field experiment was carried out to study the effect of water-repellency on water and bromide movement in a coarse-textured soil in the southwestern part of The Netherlands. The field data were analyzed using a relatively simple numerical model based on the standard Richards' equation for unsaturated water flow and the Fickian-based convection-dispersion equation for solute transport. Water-repellency was accounted for by multiplying the water content and the unsaturated hydraulic conductivity of the soil with F, a factor equal to the volumetric fraction of soil occupied by preferential flow paths resulting from the unstable flow process. The good comparison of simulated and measured bromide concentrations suggests that the model provides a viable method for simulating unstable water flow in water-repellent soils.     

Solute transport and water content measurements in clay soils using time domain reflectometry

Abstract

Clayey and saline soils have been shown to be problematic for time domain reflectometry (TDR) measurements. This study presents some of these problems and discusses solutions to them. Thirteen solute transport experiments were carried out in three undisturbed soil columns of swelling clay soil from Tunisia, labelled S1, S2, and S3 respectively. The columns were collected at three different physiographical regions within a catchment. Water fluxes ranged from 1.2 to 7.2 cm day^?1. The large solute transport heterogeneity and large tailing indicated that preferential flow was most pronounced in S1. The preferential flow took place in voids between structural elements and in wormholes. In S3, preferential flow was also evident, but not to the same extent as in S1. In S2, the solute transport was more uniform with little preferential flow. The heterogeneity of the solute transport increased with the water flux in S1 and to a smaller extent in S3, whereas it remained constant in S2. In a previous dye experiment in the field, preferential flow in cracks was observed at those sites where S1 and S3 were collected. In the column experiments, preferential flow in these cracks was less due to the higher initial water content compared to the dye experiments, indicating that the desiccation cracks were closed by the swelling clay.     

Microtopography,water storage and flow patterns in a fine‐textured soil under agricultural use

Agricultural use of soils implies tillage and often compaction and therefore influences processes on soil surface and affects infiltration of water into the subsoil. Although many studies on soil surface processes or flow patterns in soils exist, works relating both are rare in literature. We did two tracer experiments with Brilliant Blue FCF on a tilled and compacted plot and a non‐tilled one to investigate water storage on the soil surface during simulated rainfall and changes of soil microtopography, to analyse the associated flow patterns in the soil and to relate both to tillage and compaction. Our results show that storage was larger on the tilled and compacted plot than on the non‐tilled one. After tillage, transport processes above the plough pan were partly disconnected from those underneath because macropores were disrupted and buried by the tillage operation. However, preferential flow along cracks occurred on both plots and the macropores buried below the tillage pan still functioned as preferential flow paths. Therefore, we conclude that the studied soil is susceptible to deep vertical solute propagation at dry conditions when cracks are open, irrespective of tillage and compaction. Copyright © 2012 John Wiley & Sons, Ltd.     

Simulation of field‐scale water flow and bromide transport in a cracked clay soil

Single domain models may seriously underestimate leaching of nutrients and pesticides to groundwater in clay soils with shrinkage cracks. Various two‐domain models have been developed, either empirical or physically based, which take into account the effects of cracks on water flow and solute transport. This paper presents a model concept that uses the clay shrinkage characteristics to derive crack volume and crack depth under transient field conditions. The concept has been developed to simulate field average behaviour of a field with cracks, rather than flow and transport at a small plot. Water flow and solute transport are described with basic physics, which allow process and scenario analysis. The model concept is part of the more general agrohydrological model SWAP, and is applied to a field experiment on a cracked clay soil, at which water flow and bromide transport were measured during 572 days. A single domain model was not able to mimic the field‐average water flow and solute transport. Incorporation of the crack concept considerably improved the simulation of water content and bromide leaching to the groundwater. Still deviations existed between the measured and simulated bromide concentration profiles. The model did not reproduce the observed bromide retardation in the top layer and the high bromide dispersion resulting from water infiltration at various soil depths. A sensitivity analysis showed that the amounts of bromide leached were especially sensitive to the saturated hydraulic conductivity of the top layer, the solute transfer from the soil matrix to crack water flow and the mean residence time of rapid drainage. The shrinkage characteristic and the soil hydraulic properties of the clay matrix showed a low sensitivity. Copyright © 2000 John Wiley & Sons, Ltd.     

Differences in preferential flow with antecedent moisture conditions and soil texture: Implications for subsurface P transport

Preferential flowpaths transport phosphorus (P) to agricultural tile drains. However, if and to what extent this may vary with soil texture, moisture conditions, and P placement is poorly understood. This study investigated (a) interactions between soil texture, antecedent moisture conditions, and the relative contributions of matrix and preferential flow and (b) associated P distributions through the soil profile when fertilizers were applied to the surface or subsurface. Brilliant blue dye was used to stain subsurface flowpaths in clay and silt loam plots during simulated rainfall events under wet and dry conditions. Fertilizer P was applied to the surface or via subsurface placement to plots of different soil texture and moisture condition. Photographs of dye stains were analysed to classify the flow patterns as matrix dominated or macropore dominated, and soils within plots were analysed for their water‐extractable P (WEP) content. Preferential flow occurred under all soil texture and moisture conditions. Dye penetrated deeper into clay soils via macropores and had lower interaction with the soil matrix, compared with silt loam soil. Moisture conditions influenced preferential flowpaths in clay, with dry clay having deeper infiltration (92 ± 7.6 cm) and less dye–matrix interaction than wet clay (77 ± 4.7 cm). Depth of staining did not differ between wet (56 ± 7.2 cm) and dry (50 ± 6.6 cm) silt loam, nor did dominant flowpaths. WEP distribution in the top 10 cm of the soil profile differed with fertilizer placement, but no differences in soil WEP were observed at depth. These results demonstrate that large rainfall events following drought conditions in clay soil may be prone to rapid P transport to tile drains due to increased preferential flow, whereas flow in silt loams is less affected by antecedent moisture. Subsurface placement of fertilizer may minimize the risk of subsurface P transport, particularily in clay.     

Characterising deep vadose zone water movement and solute transport under typical irrigated cropland in the North China Plain

Understanding the dynamics and mechanisms of soil water movement and solute transport is essential for accurately estimating recharge rates and evaluating the impacts of agricultural activities on groundwater resources. In a thick vadose zone (0–15 m) under irrigated cropland in the piedmont region of the North China Plain, soil water content, matric potential, and solute concentrations were measured. Based on these data, the dynamics of soil water and solutes were analysed to investigate the mechanisms of soil water and solute transport. The study showed that the 0–15‐m vadose zone can be divided into three layers: an infiltration and evaporation layer (0–2 m), an unsteady infiltration layer (2–6 m), and a quasi‐steady infiltration layer (6–15 m). The chloride, nitrate, and sulphate concentrations all showed greater variations in the upper soil layer (0–1 m) compared to values in the deep vadose zone (below 2 m). The average concentrations of these three anions in the deep vadose zone varied insignificantly with depth and approached values of 125, 242, and 116 mg/L. The accumulated chloride, sulphate, and nitrate were 2,179 ± 113, 1,760 ± 383, and 4,074 ± 421 kg/ha, respectively. The soil water potential and solute concentrations indicated that uniform flow and preferential flow both occurred in the deep vadose zone, and uniform flow was the dominant mechanism of soil water movement in this study. The piston‐like flow velocity of solute transport was 1.14 m per year, and the average value of calculated leached nitrate nitrogen was 107 kg/ha?year below the root zone. The results can be used to better understand recharge processes and improve groundwater resources management.     

An examination of the steady‐state assumption in soil development models with application to landscape evolution

Soil depth and soil production are highly complicated phenomena, generated from a complex interaction of physical, biological and chemical processes. It has, nevertheless, become increasingly clear that soil formation rates are closely related to chemical weathering rates. Somewhat paradoxically, it is likewise becoming apparent that such biogeochemical reactions as slowly transform rock to soil are limited by physical processes, such as flowing water and the formation of fractures. We have formulated a theoretical approach that relates soil formation rates to chemical weathering rates, and those, likewise, to solute transport rates. For such a theoretical framework to be relevant, the solute transport rates cannot equal those of the flowing water, as is the case in Gaussian solute transport. Rather, solute transport must be slowed in accordance with heavy‐tailed solute arrival time distributions. The inference is that the traditional advection–dispersion equation formulation for solute transport is inadequate in the typically heterogeneous geological media that weather to form soils. Here we examine the implications of this soil production model on the assumption of the approach to steady state. Particularly at slow erosion rates we find that many soil columns are not in equilibrium. This tendency may be accentuated in dry climates. Copyright © 2017 John Wiley & Sons, Ltd.     

Temporal variability of solute transport under vadose zone conditions

The heterogeneity of the solute flux field in the horizontal plane at the field scale has been documented in several field studies. On the other hand, little information is available on the persistence of certain solute transport scenarios over consecutive infiltration cycles. This study was initiated to analyse the recurrence of solute leaching behaviour as estimated in two soil column tests emphasizing the preferential flow phenomenon. Twenty-four small-sized soil samples were subjected to two consecutive unsaturated steady-state flow leaching experiments with bromide as tracer. Observed breakthrough curves (BTCs) were analysed by the method of moments and by the advection–dispersion equation (ADE) to classify solute behaviour. Frequency distributions of the parameters indicating the solute velocity were heavily skewed or bimodal, reflecting the broad variability of the leaching scenarios, including some with pronounced preferential solute breakthrough. Exclusion of the preferential flow columns from our calculations revealed an average amount of 37% of immobile water. The large-scale BTCs derived from assembling the individual concentration courses of each run showed similar features, such as an early bromide breakthrough. However, two distinct apices, viz. one preferential and one matrix, were observed only in the first run, whereas the concentration decrease between the peaks was missing from the second run. A change in soil structure with continuous leaching was presumed to modify the interplay of the various flow domains, thereby altering the spreading of the BTCs. Correlation analysis between parameters of both tests suggests that preferential transport conditions are likely to occur at the same locations in the field over several infiltration cycles, whereas the ‘classical’ or expected matrix flow is time variant and therefore seems to be hardly predictable. © 1998 John Wiley & Sons, Ltd.     

Water flux and sediment transport within a forested landscape: the role of connectivity,subsurface flow,and slope length scale on transport mechanism

The connectivity and upscaling of overland runoff and sediment transport are important issues in hillslope hydrology to identify water flux and sediment transport within landscape. These processes are highly variable in time and space with regard to their interactions with vegetation and soil surface conditions. The generation of overland runoff and its spatial connectivity were examined along a slope to determine the variations in the transport mechanism of runoff and soil particles by rain splash and overland runoff. Field experiments were conducted by erosion plots on a steep hillslope at lengths of 5, 10, and 15 m. The overland runoff connectivity and flow transport distance decreased with the slope length, while spatial variability of infiltration increased significantly with the slope length. Observation of subsurface flow revealed that surface soil and litter layer could have important role in water transport. However, the surface soil water content and water flux transport along the slope was highly variable for different storm events; the variability was related to the complexity of the system, mainly by way of the initial wetness conditions and infiltration characteristics. Only net rain‐splashed soil was measurable, but examination of the water flux, overland runoff and sediment transport connectivity, characteristics of sheetwash, and the variability in spatial infiltration indicated an increase in the contribution of the rain splash transport mechanism along the slope. Copyright © 2013 John Wiley & Sons, Ltd.     

Modelling soil solute release and transport in run‐off on a loessial slope with and without surface stones

Stone covers on loessial slopes can increase the time of infiltration by slowing the velocity of the overland flow, which reduces the transport of solutes, but few mechanistic models have been tested under water‐scouring conditions. We carried out field experiments to test a previously proposed, physically based model of water and solute transport. The area of soil infiltration was calculated from the uncovered surface area, and Richards' equation and the kinematic wave equation were used to describe water infiltration and flow along slopes with stone covers. The transport of chemicals into the run‐off from the surface soil, presumably by diffusion, and their movement in the soil profile could be described by the convection–diffusion equations of the model. The simulated and measured data correlated well. The stones on the soil surface reduced the area available for infiltration but increased the Manning coefficient, eventually leading to increased water infiltration and decreased solute loss with run‐off. Our results indicated that the traditional model of water movement and solute migration could be used to simulate water transport and solute migration for stone‐covered soil on loessial slopes.     

Experimental study and mathematical modelling of soluble chemical transfer from unsaturated/saturated soil to surface runoff

A one‐dimensional, two‐layer solute transport model is developed to simulate chemical transport process in an initially unsaturated soil with ponding water on the soil surface before surface runoff starts. The developed mathematical model is tested against a laboratory experiment. The infiltration and diffusion processes are mathematically lumped together and described by incomplete mixing parameters. Based on mass conservation and water balance equations, the model is developed to describe solute transport in a two‐zone layer, a ponding runoff zone and a soil mixing zone. The two‐zone layer is treated as one system to avoid describing the complicated chemical transport processes near the soil surface in the mixing zone. The proposed model was analytically solved, and the solutions agreed well with the experimental data. The developed experimental method and mathematical model were used to study the effect of the soil initial moisture saturation on chemical concentration in surface runoff. The study results indicated that, when the soil was initially saturated, chemical concentration in surface runoff was significantly (two orders of magnitude) higher than that with initially unsaturated soil, while the initial chemical concentrations at the two cases were of the same magnitude. The soil mixing depth for the initially unsaturated soil was much larger than that for the initially saturated soil, and the incomplete runoff mixing parameter was larger for the initially unsaturated soil. The higher the infiltration rate of the soil, the greater the infiltration‐related incomplete mixing parameter. According to the quantitative analysis, the soil mixing depth was found to be sensitive for both initially unsaturated and saturated soils, and the incomplete runoff mixing parameter was sensitive for initially saturated soil but not for the initially unsaturated soil; the incomplete infiltration mixing parameter behaved just the opposite. Some suggestions are made for reducing chemical loss from runoff. Copyright © 2010 John Wiley & Sons, Ltd.     

Simulations of water movement and solute transport through different soil texture configurations under negative‐pressure irrigation

This study examined the effects of different soil texture configurations on water movement and solute transport to provide a reliable scientific basis for the application of negative‐pressure irrigation (NPI) technology. HYDRUS‐2D was used to analyse water movement and solute transport under NPI. The main results are as follows: (a) HYDRUS‐2D can be used to simulate water movement and solute transport under NPI, as there was good agreement between the simulated and measured values for water contents, NaCl concentrations, cumulative water infiltration, and wetting distances in the horizontal and vertical directions; the Nash–Sutcliffe efficiency coefficients were in the range of 0.94–0.97. (b) Layered soils have obvious effects on water movement under NPI. With the emitter position in the loam layer, when a coarse texture of loamy sand was present below the loam layer (namely, L‐LS), irrigation water accumulated in the topsoil, and this led to an increase in evaporation compared with the homogeneous loam profile. However, fine texture silty loam or silty clay loam layers beneath the loam layer (namely, L‐SiL or L‐SiCL, respectively) was more conducive to water infiltration into the lower layer, and this increased the amount of water infiltration and simultaneously reduced the surface evaporation effectively. (c) Layered soils have obvious effects on solute transport under NPI, and salt accumulation will readily occur in the clay‐rich soil layer at the interface. The maximum soil salt accumulation of L‐LS occurred above the soil interface between the two soil layers with a value of 21.80 g/kg; however, for L‐SiCL and L‐SiL, the maximum salt accumulation occurred below the soil interface between the two soil layers, with values of 23.80 g/kg and 20.08 g/kg, respectively. (d) Interlayered soils showed remarkable changes in the water infiltration characteristics and salt‐leaching intensities under NPI, and the properties for the soil profile with a silty loam interlayer were better than those for the soil profile with a silty clay loam interlayer. The soil profile with a loamy sand interlayer had the lowest amount of water infiltration, which resulted in reductions of the salt‐leaching intensities. Thus, NPI is clearly not suitable for loamy sand soil. Overall, the results demonstrated that soil texture configurations affected water movement and solute transport under NPI. Therefore, careful consideration should be given to the use of NPI to achieve target soil water and solution conditions and reduce water loss.     

Effect of anisotropy on solute transport in degraded fen peat soils

Peat soils are heterogeneous, anisotropic porous media. Compared to mineral soils, there is still limited understanding of physical and solute transport properties of fen peat soils. In this study, we aimed to explore the effect of soil anisotropy on solute transport in degraded fen peat. Undisturbed soil cores, taken in vertical and horizontal direction, were collected from one drained and one restored fen peatland both in a comparable state of soil degradation. Saturated hydraulic conductivity (K _s) and chemical properties of peat were determined for all soil cores. Miscible displacement experiments were conducted under saturated steady state conditions using potassium bromide as a conservative tracer. The results showed that (1) the K _s in vertical direction (K _sv) was significantly higher than that in horizontal direction (K_sh), indicating that K _s of degraded fen peat behaves anisotropically; (2) pronounced preferential flow occurred in vertical direction with a higher immobile water fraction and a higher pore water velocity; (3) the 5% arrival time (a proxy for the strength of preferential flow) was affected by soil anisotropy as well as study site. A strong correlation was found between 5% arrival time and dispersivity, K _s and mobile water fraction; (4) phosphate release was observed from drained peat only. The impact of soil heterogeneity on phosphate leaching was more pronounced than soil anisotropy. The soil core with the strongest preferential flow released the highest amount of phosphate. We conclude that soil anisotropy is crucial in peatland hydrology but additional research is required to fully understand anisotropy effects on solute transport.     

Flow in unsaturated random porous media,nonlinear numerical analysis and comparison to analytical stochastic models

This work presents a rigorous numerical validation of analytical stochastic models of steady state unsaturated flow in heterogeneous porous media. It also provides a crucial link between stochastic theory based on simplifying assumptions and empirical field and simulation evidence of variably saturated flow in actual or realistic hypothetical heterogeneous porous media. Statistical properties of unsaturated hydraulic conductivity, soil water tension, and soil water flux in heterogeneous soils are investigated through high resolution Monte Carlo simulations of a wide range of steady state flow problems in a quasi-unbounded domain. In agreement with assumptions in analytical stochastic models of unsaturated flow, hydraulic conductivity and soil water tension are found to be lognormally and normally distributed, respectively. In contrast, simulations indicate that in moderate to strong variable conductivity fields, longitudinal flux is highly skewed. Transverse flux distributions are leptokurtic. the moments of the probability distributions obtained from Monte Carlo simulations are compared to modified first-order analytical models. Under moderate to strong heterogeneous soil flux conditions (σ²_y≥1), analytical solutions overestimate variability in soil water tension by up to 40% as soil heterogeneity increases, and underestimate variability of both flux components by up to a factor 5. Theoretically predicted model (cross-)covariance agree well with the numerical sample (cross-)covarianaces. Statistical moments are shown to be consistent with observed physical characteristics of unsaturated flow in heterogeneous soils.©1998 Elsevier Science Limited. All rights reserved     

Multi-functional heat pulse probe measurements of coupled vadose zone flow and transport

Simultaneous measurement of coupled water, heat, and solute transport in unsaturated porous media is made possible with the multi-functional heat pulse probe (MFHPP). The probe combines a heat pulse technique for estimating soil heat properties, water flux, and water content with a Wenner array measurement of bulk soil electrical conductivity (EC_bulk). To evaluate the MFHPP, we conducted controlled steady-state flow experiments in a sand column for a wide range of water saturations, flow velocities, and solute concentrations. Flow and transport processes were monitored continuously using the MFHPP. Experimental data were analyzed by inverse modeling of simultaneous water, heat, and solute transport using an adapted HYDRUS-2D model. Various optimization scenarios yielded simultaneous estimation of thermal, solute, and hydraulic parameters and variables, including thermal conductivity, volumetric water content, water flux, and thermal and solute dispersivities. We conclude that the MFHPP holds great promise as an excellent instrument for the continuous monitoring and characterization of the vadose zone.     

Solute transport scales in an unsaturated stony soil

Solute transport parameters are known to be scale-dependent due mainly to the increasing scale of heterogeneities with transport distance and with the lateral extent of the transport field examined. Based on a transect solute transport experiment, in this paper we studied this scale dependence by distinguishing three different scales with different homogeneity degrees of the porous medium: the observation scale, transport scale and transect scale. The main objective was to extend the approach proposed by van Wesenbeeck and Kachanoski to evaluating the role of textural heterogeneities on the transition from the observation scale to the transport scale. The approach is based on the scale dependence of transport moments estimated from solute concentrations distributions. In our study, these moments were calculated starting from time normalized resident concentrations measured by time domain reflectometry (TDR) probes at three depths in 37 soil sites 1 m apart along a transect during a steady state transport experiment. The Generalized Transfer Function (GTF) was used to describe the evolution of apparent solute spreading along the soil profile at each observation site by analyzing the propagation of the moments of the concentration distributions. Spectral analysis was used to quantify the relationship between the solid phase heterogeneities (namely, texture and stones) and the scale dependence of the solute transport parameters. Coupling the two approaches allowed us to identify two different transport scales (around 4-5 m and 20 m, respectively) mainly induced by the spatial pattern of soil textural properties. The analysis showed that the larger transport scale is mainly determined by the skeleton pattern of variability. Our analysis showed that the organization in hierarchical levels of soil variability may have major effects on the differences between solute transport behavior at transport scale and transect scale, as the transect scale parameters will include information from different scales of heterogeneities.     

Grid resolution study of ground water flow and transport

Three-dimensional grids representing a heterogeneous, ground water system are generated at 10 different resolutions in support of a site-scale flow and transport modeling effort. These grids represent hydrostratigraphy near Yucca Mountain, Nevada, consisting of 18 stratigraphic units with contrasting fluid flow and transport properties. The grid generation method allows the stratigraphy to be modeled by numerical grids of different resolution so that comparison studies can be performed to test for grid quality and determine the resolution required to resolve geologic structure and physical processes such as fluid flow and solute transport. The process of generating numerical grids with appropriate property distributions from geologic conceptual models is automated, thus making the entire process easy to implement with fewer user-induced errors. The series of grids of various resolutions are used to assess the level at which increasing resolution no longer influences the flow and solute transport results. Grid resolution is found to be a critical issue for ground water flow and solute transport. The resolution required in a particular instance is a function of the feature size of the model, the intrinsic properties of materials, the specific physics of the problem, and boundary conditions. The asymptotic nature of results related to flow and transport indicate that for a hydrologic model of the heterogeneous hydrostratigraphy under Yucca Mountain, a horizontal grid spacing of 600 m and vertical grid spacing of 40 m resolve the hydrostratigraphic model with sufficient precision to accurately model the hypothetical flow and solute transport to within 5% of the value that would be obtained with much higher resolution.