Field observations of nearshore bar formation

The formation of an inner nearshore bar was observed during a high‐energy event at the sandy beach of Vejers, Denmark. The bar accreted in situ during surf zone conditions and the growth of the bar was associated with the development of a trough landward of the bar. Measurements of hydrodynamics and sediment fluxes were obtained from electromagnetic current meters and optical backscatter sensors. These process measurements showed that a divergence in sediment transport occurred at the location of the developing trough, and observed gradients in cross‐shore net sediment flux were consistent with the morphological development. The main cause for the flux gradients were cross‐shore gradients in offshore‐directed mean current (undertow) speed which depended upon local relative wave height and local bed slope. Copyright © 2007 John Wiley & Sons, Ltd.     

A note on the amount of wave energy transmitted over nearshore sand bars

The wave energy loss as waves break on nearshore bars is an important geomorphological process as it controls the stability of the adjacent beaches and dunes. The effect is particularly important during storms as it serves to guard against severe shoreline erosion. Field measurements from Florida and Ireland of waves crossing both single and multiple bar bedforms, indicate that where bar-breaking occurs, between 78 and 99 per cent of wave energy may be dissipated from individual waves. However, a further 20 per cent energy may reach the shore if wave frequencies increase during the reformation process. This latter effect was not noted at the multiple bar site where spilling mode breakers dominate. The level of energy dissipation is related to the time taken to cross that section of the submerged bar below the critical depth, d < 1.28H. In the field this may be approximated by the ratio of wave speed to the width of the bar breaker zone.     

Nearshore bar migration and sediment-induced buoyancy effects

A 1-D General Ocean Turbulence Model that includes the effects of sediment-induced stratification is shown to simulate the observed onshore and offshore migration of a nearshore sandbar. The only two free parameters of the model, the bed reference concentration and the sediment diffusivity, are taken from the literature, rather than tuned to the data used here. The model results suggest that predictions of onshore bar migration, in which wave-induced sediment transport confined to within a few centimeters of the bottom dominates, are not greatly affected by accounting for buoyancy effects. The model results also suggest that both mean flows and waves transport sediment during offshore bar migration, with different components of transport dominating at different cross-shore locations across the bar-trough bathymetry. Neglecting the effects of sediment-induced stratification results in higher model skill during the largest waves, likely because the excess turbulence production simulated by the non-stratified model is counterbalanced by neglected breaking-wave-generated turbulence. Considering both onshore and offshore migration, the model that includes sediment-induced stratification has higher skill than the model without stratification.     

Observations of offshore bar decay: Sediment budgets and the role of lower shoreface processes

Long-term, net offshore bar migration is a common occurrence on many multiple-barred beaches. The first stage of the process involves the generation of a longshore bar close to the shoreline that oscillates about a mean position for some time, followed by a stage of net offshore migration across the upper shoreface, and finally a stage of decaying bar form through loss of sediment volume at the outer boundary of the upper shoreface. The phenomenon has been previously documented in the Netherlands, the USA, the Canadian Great Lakes, and in New Zealand, but our present understanding of the morphodynamic processes and sediment transport pathways involved in bar decay is limited. In this paper, long-term, net offshore bar migration is investigated at Vejers Beach, located on the North Sea coast of Denmark where offshore bar migration rates are of the order of 45–55 m a⁻¹. A wave height transformation model confirmed that the decay of the outer bar results in increased wave heights and undertow speeds at the more landward bar potentially causing this bar to speed up its offshore migration. The causes for outer bar decay were investigated through field measurements of sediment transport at the decaying bar and at a position further seaward on the lower shoreface. The measurements showed that a cross-shore transport convergence exists between the bar and the lower shoreface and that the loss of sediment involved in bar decay is associated with a longshore directed transport by non-surf zone processes. At Vejers, and possibly elsewhere, the net offshore migration of bars and the subsequent loss of sand during bar decay is an important part of the beach and shoreface sediment budget.     

A field test of tubino's (1991) model of alternate bar formation

This study investigates the fluvial dynamics of straight natural stream channels. In particular, this experimental field study quantitatively assesses a physically based non-linear mathematical theory of alternate bar formation under unsteady natural flow conditions within a straight alluvial stream. The study site is an artificially straightened section of the Embarras River located approximately 16 km south of Champaign, Illinois. Data were collected on channel form, gradient, alternate bar dimensions, bed sediment size and flow stage over a 2 year study period. Both linear and non-linear steady flow hydrodynamic theories suggest that alternate bars are critical to the process of meander development. But these theories do not predict bar development for unsteady flow conditions, which typically occur in natural alluvial channels. Tubino (1991) suggests that bar evolution for a flood hydrograph can be divided into three parts: (1) a period of limited bar growth during the rising stage of the flood; (2) a stage of modest bar decay near the peak of the flood; and (3) a stage of non-linear bar growth during the prolonged falling stage of the flood. Bars developed during the falling limb of a hydrograph, and exhibited sequential development rather than the uniform growth along the reach predicted by Tubino's model. As flow stage decreased, short, low, fine-grained bars were superimposed on long, high and coarser-grained bars that developed under preceding high flow stages. These results suggest that the process of bar formation in artificially straightened natural streams with heterogeneous bed material may occur under different flow conditions and in a different manner than predicted by theoretical models. Further work should focus on attempting to isolate the physical mechanisms responsible for alternate bar formation in straight natural streams with heterogeneous bed material and flashy hydrologic flow regimes.     

Rates of erosion of till in the nearshore zone

Measurements of vertical erosion of till in water depths ranging from 1.1 m to 5 m have been obtained using a modified micro-erosion meter. Measurements in this environment are hindered by poor underwater visibility and losses due to high erosion rates and ice action. There is considerable spatial and temporal variability in the erosion rates measured but average values show a general increase from 11 mm y^?1 in 6 m of water to about 35 mm y^?1 in 2.3 m of water and even higher rates closer to shore. The measured values in shallow water are in good agreement with long-term rates extrapolated from shoreline recession. It is suggested that erosion occurs through abrasion and fluid stressing, and that these mechanisms are aided by softening of the upper surface of the till, possibly through cyclic ‘fatigue failure’.     

Cross-shore variation of long-term average longshore current velocity in the nearshore zone

The cross-shore variation of long-term average longshore current velocity was investigated on the basis of a 15-year data set of longshore current, wave and wind. The longshore current velocities were measured once a day along a 427-m-long pier. The results show that the direction of the long-term average longshore current velocity away (>200 m) from the shore was the opposite to that near the shore. The southward current was dominant offshore, whereas the northward current was dominant near the shore. The cross-shore variation of the long-term average longshore current velocity was formed owing to a difference between the wave and wind conditions when the northward and southward currents developed. When the northward current developed, the offshore wave height was relatively small and the frequency of the southward wind velocity was almost equal to that of the northward one. As a result, the northward current developed only near the shore and decayed outside the narrow surf zone. On the other hand, when the southward current developed, the offshore wave height was relatively large and the southward wind velocity was predominant, which resulted in the southward current developing not only in the wide surf zone but also outside the surf zone. The superposition of the two cross-shore variations produced a cross-shore variation of the long-term average longshore current velocity with a northward velocity near the shore and a southward velocity away from the shore.     

Alternate bar development in an alpine river following engineering works

Formation and development of alternate bars in an engineered mountainous reach of the Arc River, France, is studied using photo analysis, 1D modelling and by applying theoretical and empirical models for alternate bar systems. Alternate bars already existed in the 80s in the form of a stable confined wandering system. In 1994, the river bed was flattened after engineering works. However, aerial photographs and cross-sectional profiles show that bars rapidly recovered within a few years. The alternate bar system evolved rapidly with a reduction of the number of bars and so an increasing bar length. The width-to-depth ratio, the slope change, the bend upstream of the reach, and the sediment supplies are the main controls of bar formation and evolution. The system appears to lead to force bars due to the bend but also due to a bridge in the downstream part of the reach. Nevertheless some free mobile bars are still observed in the middle of the reach. A discussion on the alternate bar formation is provided using empirical and analytical models. Finally, impacts of low flows and vegetation seem to be significant in the stabilization of the system toward a confined wandering system as observed before the engineering works.     

Vertical profiles of fluid velocity and suspended sediment concentration in nearshore

Based on the power function of velocity and the friction velocity,a velocity profile is obtained.By solving the Schmidt’s diffusion equation,an equilibrium suspended sediment concentration profile is further deduced.The profiles of velocity and suspended sediment concentration agree well with the field data,and the profile of suspended sediment concentration avoids the unreasonableness of the classical Rouse profile such as a zero value at the water surface.According to these profiles,an expression which is easy to use for calculating the suspended sediment transport rate is derived.     

Field measurements of intertidal bar evolution on a high‐energy beach system

Nearshore bars play a pivotal role in coastal behaviour, helping to protect and restore beach systems particularly in post‐storm conditions. Examination of bar behaviour under various forcing conditions is important to help understand the short‐ to medium‐term evolution of sandy beach systems. This study carried out over a nine‐week period examines, the behaviour of three intertidal bars along a high energy sandy beach system in northwest Ireland using high‐frequency topographic surveys and detailed nearshore hydrodynamic modelling. Results show that, in general, there was onshore migration for all the bars during the study period, despite the variability observed between bars, which was driven mostly by wave dominated processes. Under the prevailing conditions migration rates of up to 1.83 m day^?1 and as low as 0.07 m day^?1 were observed. During higher wave energy events the migration rates of the bars decelerated in their onshore route, however, under lower wave energy conditions, they quickly accelerated maintaining their shoreward migration direction. Tidal influence appears to be subordinate in these conditions, being restricted to moderating the localized wave energy at low tides and in maintaining runnel configurations providing accommodation space for advancing slip faces. The study highlights the intricate behavioural patterns of intertidal bar behaviour along a high energy sandy coastline and provides new insights into the relative importance of wave and tidal forcing on bar behaviour over a relatively short time period. Copyright © 2016 John Wiley & Sons, Ltd.     

Removal fluxes of Mn and Fe from the nearshore waters along the west coast of Taiwan

Dissolved and particulate Mn and Fe in the nearshore waters were determined at 27 stations along the west coast of Taiwan during 19-23 November 2004. The latitudinal distributions of Mn and Fe were very similar; however, the concentration in the dissolved phase was lower, whereas that in the particulate phase was higher in the northern regime. The higher percentage of Fe than Mn that was associated with particles resulted in a two-order of magnitude higher particle-water partition coefficient for Fe, K_d(Fe), than that for Mn, K_d(Mn). The removal fluxes of Mn and Fe could be estimated by multiplying the particulate ²³⁴Th removal flux with the Mn/²³⁴Th and Fe/²³⁴Th ratios in suspended particles, which ranged from 0.1 to 3.8 mmol m⁻² d⁻¹ for Mn, and from 3.4 to 194.5 mmol m⁻² d⁻¹ for Fe. Residence times ranged from 1 to 20 days for Mn and Fe were estimated in the nearshore.     

Characterizing beach intertidal bar systems using multi-annual LiDAR data

Intertidal bars are common in mesotidal/macrotidal low-to-moderate energy coastal environments and an understanding of their morphodynamics is important from the perspective of both coastal scientists and managers. However, previous studies have typically been limited by considering bar systems two-dimensionally, or with very limited alongshore resolution. This article presents the first multi-annual study of intertidal alongshore bars and troughs in a macrotidal environment using airborne LiDAR (light detection and ranging) data to extract three-dimensional (3D) bar morphology at high resolution. Bar and trough positions are mapped along a 17.5 km stretch of coastline in the northwest of England on the eastern Irish Sea, using eight complete, and one partial, LiDAR surveys spanning 17 years. Typically, 3–4 bars are present, with significant obliquity identified in their orientation. This orientation mirrors the alignment of waves from the dominant south-westerly direction of wave approach, undergoing refraction as they approach the shoreline. Bars also become narrower and steeper as they migrate onshore, in a pattern reminiscent of wave shoaling. This suggests that the configuration of the bars is being influenced by overlying wave activity. Net onshore migration is present for the entire coastline, though rates vary alongshore, and periods of offshore migration may occur locally, with greatest variability between northern and southern regions of the coastline. This work highlights the need to consider intertidal bar systems as 3D, particularly on coastlines with complex configurations and bathymetry, as localized studies of bar migration can overlook 3D behaviour. Furthermore, the wider potential of LiDAR data in enabling high-resolution morphodynamic studies is clear, both within the coastal domain and beyond. © 2019 John Wiley & Sons, Ltd.     

钢框架结构典型震害的计算机模拟研究

为模拟钢框架结构的典型震害,本文基于ANSYS软件建立了钢框架结构简化模型。该模型可以考虑楼板对钢框架结构整体性能的影响,并且进一步考虑了楼板与钢梁之间的滑移、节点域变形,以及梁柱节点焊缝的断裂等因素。应用本文建立的钢框架结构模型对北岭地震中Blue Cross大厦的震害进行了模拟,与实际震害对比的结果表明,该模型能够比较精确地模拟地震作用下钢框架结构的响应。钢框架结构模型对节点焊缝断裂的钢框架结构震害研究有着重要的意义。     

Field and computer simulation experiments on the formation of desert pavement

A series of rainfall simulation experiments was carried out at the Walnut Gulch Experimental Watershed, Tombstone, Arizona (31° 43′N, 110° 41′W), to observe the speed at which desert pavement surfaces could be re-established following disturbance. The results of these experiments, which consisted of repeated, 5 min rainfall events, demonstrate that pavements can reform within 10 events, which is compatible with observations of the recovery of surfaces under natural rainfall on an annual cycle. A model for the development of pavements by raindrop erosion processes had previously shown the importance of these processes. The rainfall simulation experiments were used to test the general applicability of this model. The model was able to reproduce the general characteristics of the regenerated surfaces and the timing of their development. However, details of the particle size fractions produced were less well simulated by the model. Testing of the sensitivity of the model to the sediment transport parameters suggests that this problem is not related to the soil characteristics, but is more likely to be an indication of a poor understanding of all the feedbacks operating in the raindrop erosion processes. Copyright © 1999 John Wiley & Sons, Ltd.     

卫星介质深层充电的计算机模拟研究

卫星介质深层充电效应是诱发地球同步轨道卫星运行故障和异常的重要因素之一,文中介绍了介质深层充电的物理机制,给出了初步的物理模型和计算机模拟方法,该模型的模拟计算结果与欧空局的深层充电分析软件DICTAT的计算结果吻合得很好. 深层充电导致的最大电场总是出现在介质的接地侧,因此,介质的接地侧是发生放电的危险区域;对于典型的外辐射带高能电子能谱情况,介质的充电时间为小时量级.     

Channel bar dynamics on multi‐decadal timescales in an active meandering river

Occurrence and development of channel bars are major components of the morphodynamics of rivers and their relation to river meandering has been much explored through theory and experimentation. However, field and documentary data of characteristics and evolution over timescales from years to several decades are lacking. Four sets of aerial photographs in the period 1984–2007 were used to map and quantify bar numbers and areas in GIS on an active meandering reach. Bar types were classified. Additional temporal resolution was provided by annual ground photography and mapping for 1981–2010. Analysis was extended backward by use of large scale Ordnance Survey maps from 1873 onwards. As expected, point bars are the most common type but ‘free’ bars of several types are major components of bar deposition. Point bars and attached bars are significantly larger in size than mid‐channel and side bars. Spatial distribution of bars varies down the reach and over time but is related to channel sinuosity, gradient and mobility and to bend evolution. Different types of bar occur in distinctive channel locations, with point and concave‐bend bars in zones of high curvature. Bar activity shows a relation with discharge events and phases and possibly with changing riparian conditions, but superimposed on this is a common sequence of bar evolution from incipient gravel mid‐channel bars to full floodplain integration. This life‐cycle is identified as 7–9 years on average. No evidence for mobility of free bars within the course is found. The results are compared with bar and bend theory; the bars are forced and conform in general to bend theory but detailed variation relates to geomorphic factors and to autogenic sequences of bends and bars. Mid‐channel bars are width induced. Variability of bar occurrence needs to be taken into account in river management and ecological evaluation, including for the EU WFD. Copyright © 2011 John Wiley & Sons, Ltd.     

Investigation of mechanisms of formation of biphenyls and benzonaphthothiophenes by simulation experiment

The formation mechanisms of biphenyl series and benzonaphthothiophene series are investigated by means of simulation experiment. Biphenyl series are likely formed in two ways: one is the aromatization of the chain compounds containing conjugated C== C double bonds or the compounds with such a kind of sidechains, and the other is the reaction of sulfur with ordinary chain compounds, in which sulphur acts on ordinary sidechain compounds by seizing some hydrogens and forming (H2S and) the intermediates with conjugated C== C double bonds first, and then the intermediates are aromatized. One of the basic precursors of benzonaphthothiophenes is likely the phenylnaphthalenes which may originate from the chain compounds containing conjugated C== C double bonds, the compounds with such sidechains and saturate or unsaturate chain compounds. Thermal stability of biphenyls is high, but they can become dibenzothiophenes and polycyclic aromatic hydrocarbons or dibenzofurans and polycyclic aromatic hydrocarbons respectively in the presence of sulphur or oxygen. The ratio of biphenyl and m-biphenyl to biphenyls may be employed to indicate the depositional environment in the mild to medium maturation, of which the higher value indicates a fresh water depositional environment and the lower indicates a saline depositional environment. The relative high content of benzonaphthothiophenes in the crude oil indicates that the crude oil has undergone an intense sulfurization in the source rock or reservoir.     

地层衰减定量模拟的地震物理模拟方法

Q值是描述地层衰减特征的重要地震物理参数,研究Q值对提高地震资料分辨率,提高地震成像精度具有重要意义.本文从地震物理模拟中模型材料的动力学特征出发,提出了一种地层衰减定量模拟的地震物理模拟方法.通过铝样验证了衍射校正方法的准确性,利用有机玻璃实验分析了不同测量方法求取Q值的测量精度问题,从而优选测量方法;然后基于复合材料的实验数据,建立复合材料配比与各物理参数之间的函数关系,利用该函数关系指导地层衰减定量模拟.结合单层地震物理模型和近地表地震物理模型,研究了模拟地震记录及其频谱特征与野外实际情况之间的相似性,基于建立的函数关系研究分析了地层衰减定量模拟的准确性.实验结果表明,基于地震衰减定量模拟方法构建近地表地震物理模型时,模型中模拟参数不仅与设计参数保持很好的一致性,同时具有很高的准确性,模拟地层的频谱衰减特征与野外地层保持一致.

     

含洞穴地层随钻电阻率测井响应自适应hp有限元数值模拟(英文)

含洞穴的碳酸盐岩地层具有强烈的非均质性及储集空间预测难度大的特点,利用随钻电阻率测井方法对井眼环境含洞穴的储层进行准确识别和划分,是当前研究的一个焦点问题。本文使用一种新型的高效和高精度自适应有限元方法(hp—FEM)模拟和分析了含洞穴地层随钻电阻率测井仪器响应。本文所提的hp-FEM与传统h-FEM相比,其结果具有网格自适应的特点,并且计算能够以指数速率收敛于较高的精度。数值实例使用自适应有限元方法研究地层中洞穴的大小、洞穴距离井眼的远近和仪器发射频率改变对测井响应的影响,并提供了识别含洞穴地层的方法。研究结果可以为实际测井中遇到的各种地层洞穴的准确识别和定量评价提供理论依据。