Joint traveltime inversion of wide-angle seismic data and a deep reflection profile from the central North Sea

We report results from the Seismic Wide-Angle and Broadband Survey carried out over the Mid North Sea High. This paper focuses on integrating the information from a conventional deep multichannel reflection profile and a coincident wide-angle profile obtained by recording the same shots on a set of ocean bottom hydrophones (OBH). To achieve this integration, a new traveltime inversion scheme was developed (reported elsewhere) that was used to invert traveltime information from both the wide-angle OBH records and the reflection profile simultaneously. Results from the inversion were evaluated by producing synthetic seismograms from the final inversion model and comparing them with the observed wide-angle data, and an excellent match was obtained. It was possible to fine-tune velocities in less well-resolved parts of the model by considering the critical distance for the Moho reflection. The seismic velocity model was checked for compatibility with the gravity field, and used to migrate and depth-convert the reflection profile. The unreflective upper crust is characterized by a high velocity gradient, whilst the highly reflective lower crust is associated with a low velocity gradient. At the base of the crust there are several subhorizontal reflectors, a few kilometres apart in depth, and correlatable laterally for several tens of kilometres. These reflectors are interpreted as representing a strike section through northward-dipping reflectors at the base of the crust, identified on orthogonal profiles by Freeman et al. (1988) as being slivers of subducted and imbricated oceanic crust, relics of the mid-Palaeozoic Iapetus Ocean.     

Deep seismic reflection profiles across the western Barents Sea

Summary. The continental crust beneath the western Barents Sea has been acoustically imaged down to Moho depths in a large scale deep seismic reflection experiment. A first-order pattern of crustal reflectivity has been established and the thickness of the crust determined. A number of features with important implications for the tectonics of the area have been discovered. The results are presented in the form of two transects.     

Crustal and upper-mantle structure in the Eastern Mediterranean from the analysis of surface wave dispersion curves

The dispersive properties of surface waves are used to infer earth structure in the Eastern Mediterranean region. Using group velocity maps for Rayleigh and Love waves from 7 to 100 s, we invert for the best 1-D crust and upper-mantle structure at a regular series of points. Assembling the results produces a 3-D lithospheric model, along with corresponding maps of sediment and crustal thickness. A comparison of our results to other studies finds the uncertainties of the Moho estimates to be about 5 km. We find thick sediments beneath most of the Eastern Mediterranean basin, in the Hellenic subduction zone and the Cyprus arc. The Ionian Sea is more characteristic of oceanic crust than the rest of the Eastern Mediterranean region as demonstrated, in particular, by the crustal thickness. We also find significant crustal thinning in the Aegean Sea portion of the backarc, particularly towards the south. Notably slower S -wave velocities are found in the upper mantle, especially in the northern Red Sea and Dead Sea Rift, central Turkey, and along the subduction zone. The low velocities in the upper mantle that span from North Africa to Crete, in the Libyan Sea, might be an indication of serpentinized mantle from the subducting African lithosphere. We also find evidence of a strong reverse correlation between sediment and crustal thickness which, while previously demonstrated for extensional regions, also seems applicable for this convergence zone.     

Deep seismic reflection studies in Israel - an update

Summary. The results of three deep crustal reflection lines are presently available from Israel. A 90 km line from near the Dead Sea rift to the Mediterranean coast was carried out for deep study. Two other lines in the Mediterranean coastal area were derived by recorrelation of oil exploration lines. The data shows a division between continental inner Israel and the coastal plain. In the first area a reflective lower crust is apparent with transparent upper crust and almost transparent upper mantle. Near the coast, in an area which was previously suggested as underlain by an ancient fossil oceanic crust, strong reflections characterize the uppermost mantle. Comparison between the reflection pattern and previous deep refraction and MT data indicates some agreement away from the coast and lack of correlation in the area of possible fossil oceanic crust near the coast.     

Nontypical BIRPS on the margin of the northern North Sea: The SHET Survey

Summary. Striking similarities in the reflectivity of the crust and upper mantle on BIRPS profiles has led to the development of the "typical BIRP", a model seismic section for the British continental lithosphere. The SHET survey, collected in the region of the Shetland Islands and the northern North Sea, fits the general pattern to a certain extent. Caledonian structures and Devonian or younger basins are imaged in the otherwise acoustically transparent upper crust. An unexpected and exciting feature imaged on SHET is a short wavelength structure on the Moho or abrupt Mono offset beneath the strike-slip Walls Boundary Fault. SHET differs markedly from the SWAT typical BIRP, however, by showing a poorly reflective lower crust. Only a narrow zone (∼1 s) at the base of the crust contains high-amplitude reflections. The SHET survey therefore highlights the wide variation in lower crustal reflectivity within the total BIRPS data set rather than the similarities.     

Lithoprobe southern Canadian Cordilleran transect: Rocky Mountain thrust belt to Valhalla gneiss complex

Summary. LITHOPROBE has acquired nearly 270 km of crustal seismic reflection data across the eastern portion of the southern Canadian Cordillera, These reflection profiles, obtained during the Fall of 1985, extend from the Rocky Mountain thrust and fold belt, across the Rocky Mountain Trench, Purcell anticlinorium, Kootenay Arc, Nelson batholith and Valhalla gneiss complex. North American basement and its overlying foreshortened miogeoclinal rocks can be traced westward to the Kootenay Arc. The Purcell anticlinorium is carried by a series of west dipping thrust faults which emerge east of the anticlinorium and converge downward and merge with a detachment surface above autochthonous North American basement. Proterozoic supracrustal rocks, thickened by folding and thrusting, occupy the core of the anticlinorium. Steeply dipping surface structures of the western Purcell anticlinorium and Kootenay Arc appear to be truncated at 3 - 4 s (9-12 km) by a gently east-dipping reflection that may delineate the upper boundary of an allochthonous wedge inserted between the near surface rocks and autochthonous basement below. Beneath the Kootenay Arc, at a travel time of 9–10 s (27–30 km), the North American basement seems to be truncated by the major east-dipping Slocan Lake fault zone, which can be traced from its surface exposure at the east edge of the Valhalla gneiss complex eastward to near the base of the crust. A high amplitude, west-dipping reflection underlies the Valhalla complex and may be related to a major compressional shear zone.     

Crustal thickening under the palaeo-meso-Proterozoic Delhi Fold Belt in northwestern India: evidence from deep reflection profiling

The results of deep reflection profiling studies carried out across the palaeo-meso-Proterozoic Delhi Fold Belt (DFB) and the Archaean Bhilwara Gneissic Complex (BGC) in the northwest Indian platform are discussed in this paper. This region is a zone of Proterozoic collision. The collision appears to be responsible for listric faults in the upper crust, which represent the boundaries of the Delhi exposures. In these blocks the lower crust appears to lie NW of the respective surface exposures and the reflectivity pattern does not correspond to the exposed blocks. A fairly reflective lower crust northwest of the DFB exposures appears to be the downward continuation of the DFB upper crust. The poorly reflective lower crust under the exposed DFB may be the westward extension of the BGC upper crust at depth. Thus, the lower crust in this region can be divided into the fairly reflective Marwar Basin (MB)-DFB crust and a poorly reflective BGC crust. Vertically oriented igneous intrusions may have disturbed the lamellar lower-crustal structure of the BGC, resulting in a dome-shaped poorly reflective lower crust whose base, not traceable in the reflection data, may have a maximum depth of about 50 km, as indicated by the gravity modelling.
The DFB appears to be a zone of thick (45-50 km) crust where the lower crust has doubled in width. This has resulted in three Moho reflection bands, two of which are dipping SE from 12.5 to 15.0 s two-way time (TWT) and from 14.5 to 16.0 s TWT. Another band of subhorizontal Moho reflections, at ≈ 12.5 s TWT, may have developed during the crustal perturbations related to a post-Delhi tectonic orogeny. The signatures of the Proterozoic collision, in the form of strong SE-dipping reflections in the lower crust and Moho, have been preserved in the DFB, indicating that the crust here has not undergone any significant ductile deformation since at least after the Delhi rifting event.     

A synthesis of Cenozoic sedimentation in the North Sea

The North Sea Basin contains an almost complete record of Cenozoic sedimentation, separated by clear regional unconformities. The changes in sediment characteristics, rate and source, and expression of the unconformities reflect the tectonic, eustatic and climatic changes that the North Sea and its margins have undergone. While the North Sea has been mapped locally, we present the first regional mapping of the Cenozoic sedimentary strata. Our study provides a new regional sub‐division of the main seismic units in the North Sea together with maps of depocentres, influx direction and source areas. Our study provides a regional synthesis of sedimentation based on a comprehensive interpretation of a regionally covering reflection seismic data set. We relate observations of sediment characteristics and unconformities to the geological evolution. The timing, regional expression and stratigraphic characteristics of many unconformities indicate that they were generated by eustatic sea‐level fall, often in conjunction with other processes. Early Cenozoic unconformities, however, relate to tectonism associated with the opening of the North Atlantic. From observation on a regional scale, we infer that the sediment influx into the North Sea during the Cenozoic is more complex than previously suggested clockwise rotation from early northwestern to late southern sources. The Shetland Platform supplied sediment continuously, although at varying rates, until the latest Cenozoic. Sedimentation around Norway changed from early Cenozoic influx from the southwestern margin, to almost exclusively from the southern margin in the Oligocene and from all of southern Norway in the latest Cenozoic. Thick Eocene deposits in the Central Graben are sourced mainly from a western and a likely southern source, indicating that prominent influx from the south did not only occur from the mid‐Miocene onwards. We infer a new age for the increased progradational sediment influx in the Pleistocene of 2.5 Ma, coeval with Fennoscandian glaciation.     

Crustal structure beneath exposed accreted terranes of Southern Alaska

Summary. The crustal structure beneath the exposed terranes of southern Alaska has been explored using coincident seismic refraction and reflection profiling. A wide-angle reflector at 8–9 km depth, at the base of an inferred low-velocity zone, underlies the Peninsular and Chugach terranes, appears to truncate their boundary, and may represent a horizontal decollement beneath the terranes. The crust beneath the Chugach terrane is characterized by a series of north-dipping paired layers having low and high velocities that may represent subducted slices of oceanic crust and mantle. This layered series may continue northward under the Peninsular terrane. Earthquake locations in the Wrangell Benioff zone indicate that at least the upper two low-high velocity layer pairs are tectonically inactive and that they appear to have been accreted to the base of the continental crust. The refraction data suggest that the Contact fault between two similar terranes, the Chugach and Prince William terranes, is a deeply penetrating feature that separates lower crust (deeper than 10 km) with paired dipping reflectors, from crust without such reflectors.     

Transitional continental–oceanic structure beneath the Norwegian Sea from inversion of surface wave group velocity data

We have analysed the fundamental mode of Love and Rayleigh waves generated by 12 earthquakes located in the mid-Atlantic ridge and Jan Mayen fracture zone. Using the multiple filter analysis technique, we isolated the Rayleigh and Love wave group velocities for periods between 10 and 50  s. The surface wave propagation paths were divided into five groups, and average group velocities calculated for each group. The average group velocities were inverted and produced shear wave velocity models that correspond to a quasi-continental oceanic structure in the Greenland–Norwegian Sea region. Although resolution is poor at shallow depth, we obtained crustal thickness values of about 18  km in the Norwegian Sea area and 9  km in the region between Svalbard and Iceland. The abnormally thick crust in the Norwegian Sea area is ascribed to magmatic underplating and the thermal blanketing effect of sedimentary layers. Maximum crustal shear velocities vary between 3.5 and 3.9  km  s⁻¹ for most paths. An average lithospheric thickness of 60  km was observed, which is lower than expected for oceanic-type structure of similar age. We also observed low shear wave velocities in the lower crust and upper mantle. We suggest that high heat flow extending to depths of about 30  km beneath the surface can account for the thin lithosphere and observed low velocities. Anisotropy coefficients of 1–5 per cent in the shallow layers and >7 per cent in the upper mantle point to the existence of polarization anisotropy in the region.     

Short-term beach–dune sand budgets on the north sea coast of France: Sand supply from shoreface to dunes, and the role of wind and fetch

Three experimental plots, covering the transition from the upper beach to the dune, on the North Sea coast of France were monitored at various intervals over a period of 18–24 months via high resolution terrain surveys in order to determine inter-site sand budget variability, as well as patterns and processes involved in sand exchanges between the upper beach and dune. The wind regime consists of a fairly balanced mix of moderate (80% of winds are below 8 m/s) onshore, offshore and shore-parallel winds. Sustained dune accretion over several years depends on the periodic local onshore welding of shoreface tidal banks that have developed in the storm- and tide-dominated setting of the southern North Sea. The only site where this has occurred in the recent past is Calais, where bank welding has created a wide accreting upper beach sand flat. At this site, significant sand supply from the subtidal sand bank reservoir to the upper beach flat occurred only once over the 18-month survey following a major storm. The bulk of the sand deposited over this large flat is not directly integrated into the adjacent embryo dunes by onshore winds but is progressively reworked in situ into developing dunes or transported alongshore by the balanced wind regime, thus resulting in alongshore stretching of the embryo dune system. The Leffrinckoucke site near Belgium shows moderate beach–dune mobility and accretion, while the Wissant site exhibits significant upper beach bedform mobility controlled by strong longshore currents that result in large beach budget fluctuations with little net budget change, to the detriment of the adjacent dunes. Accretion at these two sites, which are representative of the rest of the North Sea coast of France, is presently constrained by the absence of a shore-attached sand bank supply reservoir, while upper beach–dune sand exchanges are further limited by the narrow wave-affected upper beach, the intertidal morphology of bars and troughs which segments the aeolian fetch, and the moderate wind energy conditions. The balanced wind regime limits net sand mobilisation in favour of either the beach or the dune, and may explain the relatively narrow longshore morphology of the dune ridges bounding this coast.     

High to low velocity succession in the upper crust related to tectonic emplacement: Tras os Montes-Galicia (Iberia), Brittany and Limousin (France)

Summary. Seismic probing of the upper crust in a catazonal massif in Tras os Montes, Hercynian Iberia, demonstrates the absence of a root towards the lower crust and favours a mechanism of thrust and nappe emplacement. Similar high to low velocity successions in the upper crust are evidenced in particular segments of the Hercynian domain of France. All these occurrences are related to a type region to which a particular meaning has been given in a recent plate tectonics interpretation of the Hercynian orogenesis. This model, implying large-scale nappe displacement and intracrustal thrusts furnishes in turn a general mechanism for the tectonic formation of upper crustal high and low velocity layers of limited extent in orogenic cycles.     

Surface wave dispersion, crustal structure, and sediment thickness variations across the Barents shelf

Summary. Rayleigh and Love wave group velocities were determined for 21 paths across the Barents shelf. Those group velocities exhibit regional variations of 1.0 km^-1 or more at short periods, depending upon the location of the path within the shelf. Only two different crustal shear-velocity models beneath sedimentary layers are required, however, to explain all of the group velocity data. One model pertains to most of the shelf from a longitude near the eastern coast of Svalbard to Novaya Zemlya. The other pertains to a 200 or 300 km wide region at the western edge of the shelf. Shear velocities in the upper crust of the western region are significantly higher and the crust is much thinner than they are for the rest of the shelf. That region is known to have moved to its present prosition from a point several hundred kilometres to the north during the Caledonian orogeny.
Surface wave group velocities within each of the two regions are strongly influenced by sediments which have accumulated in basins within the Barents shelf. Some of these basins, in the southern portion of the shelf, may be 10km or more in thickness.     

Coincident seismic reflection/refraction studies of the continental lithosphere: a global review

Summary. Vertical-incidence reflection profiling has identified several characteristic features of the continental Iithosphere including a generally transparent upper crust, a reflective lower crust, reflections from the crust-mantle boundary, and a commonly transparent upper mantle. The underlying physical causes of these characteristic features remain poorly understood. This review summarizes additional information brought to bear on the physical properties of these characteristic crustal structures through the use of coincident wide-angle refraction profiling.     

The transition from subduction to continental collision: crustal structure in the North Canterbury region, New Zealand

The North Canterbury region marks the transition from Pacific plate subduction to continental collision in the South Island of New Zealand. Details of the seismicity, structure and tectonics of this region have been revealed by an 11-week microearthquake survey using 24 portable digital seismographs. Arrival time data from a well-recorded subset of microearthquakes have been combined with those from three explosions at the corners of the microearthquake network in a simultaneous inversion for both hypocentres and velocity structure. The velocity structure is consistent with the crust in North Canterbury being an extension of the converging Chatham Rise. The crust is about 27 km thick, and consists of an 11 km thick seismic upper crust and 7 km thick seismic lower crust, with the middle part of the crust being relatively aseismic. Seismic velocities are consistent with the upper and middle crust being composed of greywacke and schist respectively, while several lines of evidence suggest that the lower crust is the lower part of the old oceanic crust on which the overlying rocks were originally deposited.
The distribution of relocated earthquakes deeper than 15 km indicates that the seismic lower crust changes dip markedly near 43S. To the south-west it is subhorizontal, while to the north-east it dips north-west at about 10. Fault-plane solutions for these earthquakes also change near 43S. For events to the south, P -axes trend approximately normal to the plate boundary (reflecting continental collision), while for events to the north, T -axes are aligned down the dip of the subducted plate (reflecting slab pull). While lithospheric subduction is continuous across the transition, it is not clear whether the lower crust near 43S is flexed or torn.     

Results of deep reflection seismic profiling in the Oberpfalz (Bavaria)

Summary. In order to investigate the target area of the Continental Deep Drilling (KTB) in the Oberpfalz a network of six seismic reflection lines was acquired in 1985 using the Vibroseis technique. The average length of these lines was 50 km. In addition, the 185 km long NW/SE striking line DEKORP 4 with its short appendix line 4-Q of 40 km length was acquired with the same technique. The results reveal a strongly structured upper crust. This is in contrast with previous surveys in the German Variscides which show a poorly reflective upper crust and a strongly reflective lower crust. Except for the S part of DEKORP 4 in the Oberpfalz area the Mono is only weakly reflective. In addition to the Vibroseis survey 96 shots along line DEKORP 4 were recorded by conventional reflection techniques and by portable reflection and refraction stations from university institutes and geological surveys in order to obtain wide-angle reflection and expanding spread data.     

On the roughness of Mesozoic oceanic crust in the western North Atlantic

Seismic reflection profiles from Mesozoic oceanic crust around the Blake Spur Fracture Zone (BSFZ) in the western North Atlantic have been widely used in constraining tectonic models of slow-spreading mid-ocean ridges. These profiles have anomalously low basement relief compared to crust formed more recently at the Mid-Atlantic Ridge at the same spreading rate. Profiles from other regions of Mesozoic oceanic crust also have greater relief. The anomalous basement relief and slightly increased crustal thickness in the BSFZ survey area may be due to the presence of a mantle thermal anomaly close to the ridge axis at the time of crustal formation. If so, the intracrustal structures observed may be representative of an atypical tectonic regime.     

Anomalous propagation of surface waves in the Barents Sea as inferred from NORSAR recordings

Summary. NORSAR recordings of Rayleigh waves generated by presumed nuclear explosions on central and southern Novaya Zemlya and in northwestern Siberia have been studied. Using a frequency time analysing technique and correcting for presumed known dispersion effects across the Baltic Shield, dispersion curves for two different paths across the southern part of the Barents Sea were obtained. The curves are very unusual in that they give extremely low velocities even for periods up to 20 s. For the path to the middle part of the island, the inversion of the data gives a model with sediments and consolidated sediments down to 25 km, followed by a 15-km thick basaltic layer and an upper mantle with a P velocity as low as 7.9 km/s. For the path to the southern part of Novaya Zemlya the data inversion gives a somewhat different model with sediments and consolidated sediments down to 8 km, followed by a 17-km thick zone with velocities close to granitic and a 15-km thick layer with basaltic velocities. Again the upper-mantle P velocity is only 7.9 km/s. Other indications of lateral inhomogeneities in the Barents Sea are obtained by utilizing the array's capability to determine the angle of approach of seismic waves. It is demonstrated that reflections both from inhomogeneities in the Barents Sea and the continental margin off Norway can be detected. For waves from the southern end of the island, a reflection from a strong discontinuity close to the direct path to the middle part of the island is found, whereas signals from this area include a reflected wave possibly coming from the edge of the Svalbard platform.     

Analysis of gravity fields in the northwestern Himalayas and Kohistan region using deep seismic sounding data

A Bouguer gravity anomaly map of the NW Himalayas and parts of the Kohistan/Hindukush region has been prepared using all available gravity data. Analysis of the gravity field has been carried out along a profile extending from Gujranwala (located near the edge of the Indian shield) to the Haramosh massif in a NNE–SSW direction. The gravity profile is located close to the DSS profile shot under the USSR–India scientific collaborative programme. Velocity information available along different parts of the profile has been used to infer values of crustal and upper mantle density.
The observed gravity field (Bouguer) has been interpreted in terms of Moho depth and density contrast between the crust and the mantle. The Moho depth is interpreted as increasing from nearly 35 km near the edge of the Indian shield to 75 km (below sea-level) underneath the Haramosh massif. A similar model is applicable to a profile passing to the west of Nanga Parbat massif, from Gujranwala to Ghizar, through the Kohistan region. However, along this profile high-density lower-crustal rocks appear to have been emplaced in the upper part along the main mantle thrust. The nature of isostatic compensation prevailing underneath the Himalayas has been discussed, as has the theory of lithospheric flexure proposed by Karner & Watts and Lyon-Caen & Molnar. It is felt that although these ideas explain the broad features of the Moho configuration as observed in the NW Himalayas, there are significant departures. The role of tectonic forces in shaping the Moho and causing changes in the density of the crust cannot be denied.     

Crustal structure across the Grand Banks–Newfoundland Basin Continental Margin – II. Results from a seismic reflection profile

New multichannel seismic reflection data were collected over a 565 km transect covering the non-volcanic rifted margin of the central eastern Grand Banks and the Newfoundland Basin in the northwestern Atlantic. Three major crustal zones are interpreted from west to east over the seaward 350 km of the profile: (1) continental crust; (2) transitional basement and (3) oceanic crust. Continental crust thins over a wide zone (∼160 km) by forming a large rift basin (Carson Basin) and seaward fault block, together with a series of smaller fault blocks eastwards beneath the Salar and Newfoundland basins. Analysis of selected previous reflection profiles (Lithoprobe 85-4, 85-2 and Conrad NB-1) indicates that prominent landward-dipping reflections observed under the continental slope are a regional phenomenon. They define the landward edge of a deep serpentinized mantle layer, which underlies both extended continental crust and transitional basement. The 80-km-wide transitional basement is defined landwards by a basement high that may consist of serpentinized peridotite and seawards by a pair of basement highs of unknown crustal origin. Flat and unreflective transitional basement most likely is exhumed, serpentinized mantle, although our results do not exclude the possibility of anomalously thinned oceanic crust. A Moho reflection below interpreted oceanic crust is first observed landwards of magnetic anomaly M4, 230 km from the shelf break. Extrapolation of ages from chron M0 to the edge of interpreted oceanic crust suggests that the onset of seafloor spreading was ∼138 Ma (Valanginian) in the south (southern Newfoundland Basin) to ∼125 Ma (Barremian–Aptian boundary) in the north (Flemish Cap), comparable to those proposed for the conjugate margins.