Cause of dominance by sheetflood vs. debris-flow processes on two adjoining alluvial fans, Death Valley, California

Two large, adjoining alluvial fans of the Panamint Range piedmont, Death Valley, California, are composed of different facies assemblages deposited by contrasting sedimentary processes. The Anvil Spring fan was built solely by water-flow processes (incised-channel floods and sheetfloods), whereas the neighbouring Warm Spring fan has been constructed principally by debris flows. The boundary between these fans delineates a sharp provincial piedmont contact between sheetflood-dominated fans to the south and debris-flow-dominated fans to the north. Factors such as climate, catchment area, fan area, catchment relief, aspect, vegetation types and density, and neotectonic setting are essentially identical for these two fans. The key difference between them is that their catchments are underlain by dissimilar bedrock types, which weather to yield distinctive sediment suites. Weathering of the granite and andesite of the Anvil fan catchment produces significant volumes of medium to very coarse sand, granules, pebbles, cobbles and boulders, but minimal silt and clay. In contrast, the shale, quartzite and dolomite that dominate bedrock in the Warm Spring catchment weather to yield a wide suite of sedimentary particles spanning from clay to boulders. The abundance of mud, and the unsorted character of the yielded sediment, cause precipitation-induced slope failures in the Warm Spring catchment to transform readily into debris flows. This propensity is due to the low permeability of the colluvial sediment, which causes added water to become trapped quickly and pore pressure to rise rapidly, promoting transformations to debris flows. In contrast, the limited volume of sediment finer than medium sand yielded from the Anvil fan catchment causes the colluvium to have high permeability. This factor prevents the transformation of wet colluvium to a debris flow during hydrologically triggered slope failures, instead maintaining sediment transport as entrained bed load or suspended load in a water flow.     

Tectonic controls on the geomorphic evolution of alluvial fans in the Piedmont Zone of Ganga Plain,Uttarakhand, India

The Piedmont Zone is the least studied part of the Ganga Plain. The northern limit of the Piedmont Zone is defined by the Himalayan Frontal Thrust (HFT) along which the Himalaya is being thrust over the alluvium of the Ganga Plain. Interpretation of satellite imagery, Digital Terrain Models (DTMs) and field data has helped in the identification and mapping of various morphotectonic features in the densely forested and cultivated Piedmont Zone in the Kumaun region of the Uttarakhand state of India. The Piedmont Zone has formed as a result of coalescing alluvial fans, alluvial aprons and talus deposits. The fans have differential morphologies and aggradation processes within a common climatic zone and similar litho-tectonic setting of the catchment area. Morphotectonic analysis reveals that the fan morphologies and aggradation processes in the area are mainly controlled by the ongoing tectonic activities. Such activities along the HFT and transverse faults have controlled the accommodation space by causing differential subsidence of the basin, and aggradation processes by causing channel migration, channel incision and shifting of depocentres. The active tectonic movements have further modified the landscape of the area in the form of tilted alluvial fan, gravel ridges, terraces and uplifted gravels.     

Sedimentology of the debris-flow-dominated Warm Spring Canyon alluvial fan, Death Valley, California

Facies analysis of widely distributed exposures of the 32·6 km² and 8·1-km-long Warm Spring Canyon fan, central Death Valley, shows that it has been built principally by debris-flow deposits. These deposits were derived from a mature Panamint Range catchment mostly underlain by Precambrian mudrock, quartzite and dolomite. Stacked, clast-rich and matrix-supported debris-flow lobes of slightly bouldery, muddy, pebble–cobble gravel in beds 20–150 cm thick dominate the fan from apex to toe, accounting for 75–98% of most exposures. Interstratified with the debris flows are less abundant (2–25% of cuts), thinner (5–30 cm) and more discontinuous beds of clast-supported and imbricated, pebble–cobble gravel deposited by overland flows and gully flows. This facies formed by the surficial fine-fraction water winnowing of the debris flows primarily during recessional flood stage of the debris-flow events. Two other facies associations make up a small part of the fan. The incised-channel tract consists of a 250-m-wide clast-supported ribbon of irregularly to thickly bedded, boulder, pebble, cobble gravel nested within debris-flow deposits. This channel fill is oriented generally perpendicular to the Panamint range front. It formed by extensive erosion and winnowing of debris flows deposited within the incised channel, into which all water discharge from the catchment is funnelled. The limited presence of this facies only straddling the present incised channel indicates that this channel overall has maintained a consistent position on the fan except for slight lateral shifts, some caused by strike-slip offset. Fault offset temporarily closed the upper incised channel, causing recessional debris-flow mud to be ponded behind the dam. The other local facies assemblage consists of subrounded to rounded, moderately sorted pebble gravel in low-angle cross-beds that slope both basinwards and fanwards. This gravel was deposited in beachface, backshore and shoreface barrier-spit environments that developed where Lake Manly impinged on the Warm Spring fan during late Pleistocene time. These deposits straddle headcuts into, and were derived from, erosion of the debris-flow deposits. Wave energy sorted finer sediment from the shore zone, concentrated coarser sediment and rounded the coarse to very coarse pebble fraction by selective reworking.     

Sedimentary processes and facies of the waterlaid Anvil Spring Canyon alluvial fan, Death Valley, California

The Anvil Spring Canyon fan of the Panamint Range piedmont in central Death Valley was built entirely by water-flow processes, as revealed by an analysis of widespread 2- to 12-m-high stratigraphic cuts spanning the 9·7 km radial length of this 2·5–5·0° sloping fan. Two facies deposited from fan sheetfloods dominate the fan from apex to toe. The main one (60–95% of cuts) consists of sandy, granular, fine to medium pebble gravel that regularly and sharply alternates with cobbly coarse to very coarse pebble gravel in planar couplets 5–25 cm thick oriented parallel to the fan surface. The other facies (0–25% of cuts) comprises 10- to 60-cm-thick, wedge-planar and wedge-trough beds of pebbly sand and sandy pebble gravel in backsets sloping 3–28°. Both facies are interpreted as resulting from rare, sediment-charged flash floods from the catchment, and were deposited by supercritical standing waves of expanding sheetfloods on the fan. Standing waves were repeatedly initiated, enlarged, migrated, and then terminated either by gradually rejoining the flood or by more violent breakage and washout. The frequent autocyclic growth and destruction of standing waves during an individual sheetflood resulted in the deposition of multiple coarse and fine couplet and backset sequences 50–250 cm thick across the active depositional lobe of the fan. Erosional intensity during washout of the standing wave determined whether early-phase backset-bed deposits or washout-phase sheetflood couplet deposits were selectively preserved in a given cycle. Two minor facies are also found in the Anvil fan. Pebble–cobble gravel lags (0–20% of cuts) are present above erosional scours into the sheetflood couplet and backset deposits. They consist of coarse gravel concentrated through fine-fraction winnowing of the host sheetflood facies by sediment-deficient water flows. This reworking occurred during recessional flood stage or from non-catastrophic discharge during the long intervals between major flash floods. This facies is common at the surface, giving rise to a ‘braided-stream’ appearance. However, it is stratigraphically limited, present as thin, continuous to discontinuous beds or lenses that bound 50- to 250-cm-thick sheetflood sequences. The other minor facies of the Anvil fan consists of clast-supported and imbricated, thickly stratified, pebbly, cobbly, boulder gravel present in narrow, radially aligned ribbons nested within sheetflood deposits. This facies is interpreted as representing deposition in the incised channel of the fan, a subenvironment characterized by greater flow competence resulting from maintained depth from channel-wall confinement, and by more frequent water flows and winnowing events caused by its direct connection with the catchment feeder channel.     

Early Pleistocene glacial outwash deposits in the eastern San Joaquin Valley, California: a model for humid-region alluvial fans

ABSTRACT The early Pleistocene Laguna and Turlock Lake Formations and China Hat and Arroyo Seco Gravels along the east side of the San Joaquin Valley, California, were deposited in alluvial fans and marginal lakes. Upward-coarsening sequences of silt-sand-gravel record westward progradation of glacial outwash fans from the Sierra Nevada into proglacial lakes in the San Joaquin Valley. Distinctive sedimentary features delineate lacustrine, prodelta, and delta-front facies within fan-margin deposits and lower, middle, and upper-fan facies within alluvial-fan deposits. The lacustrine facies consists of a few metres of thinly and evenly bedded, rhythmically laminated claystone and clayey siltstone in varved couplets. Draped lamination, sinusoidal lamination, and load and pillar structures occur in some beds. Siltstone and claystone grade upward to slightly thicker wavy beds of siltstone and very fine-grained unconsolidated sand deposited in a prodelta setting. Convolute laminae within deformed steeply dipping foreset beds suggest slumping on the prodelta slope. The prodelta facies grades up to the delta-front facies, which consists of burrowed and bioturbated cross-bedded fine sand. Deltaic deposits are 5–6 m thick. The lower-fan facies forms the base of the fan sequence and consists of several metres of irregularly bedded, laminated, oxidized siltstone and fine sand. The middle-fan facies consists of cross-bedded, medium-grained to gravelly sand-filled channels cut into the lower-fan facies. Interbedded lens-shaped siltstone beds 2 m thick and several metres across were deposited in abandoned channels. The upper-fan facies consists of moderately to strongly weathered clayey gravel and sand containing pebble imbrication and crude stratification. Argillization during post-depositional soil formation has blurred the distinction between mud-supported debris-flow deposits and clast-supported channel deposits, but both are present in this facies. The deposits described here demonstrate the need for additional fan models in order to incorporate the variety of deposits developed in alluvial fan sequences deposited in humid climates. In previous models based on arctic fans, debris flows, abandoned channels, or widespread siltstone beds are not present in fan sequences, nor are marginal lacustrine and deltaic deposits well represented.     

Using fossil spring deposits in the Death Valley region,USA to evaluate palaeoflowpaths

Spring deposits reveal the timing and environment of past groundwater discharge. Herein, however, the potential for fossil spring deposits to infer water sources and palaeoflowpaths through trace elements and stable and radiogenic isotopes is examined. Past discharge (70 to 285 ka) in the Tecopa Basin in the Death Valley region of southeastern California is represented by tufa deposits, including mounds, pools, cemented ledges and rare calcite feeder veins. δ¹⁸O values indicate that spring discharge was a mixture of far‐travelled (regional) water with a significant, and perhaps dominant contribution of local recharge on a nearby range front and alluvial pediment, rather than simply representing an elevated regional water table. δ¹³C values indicate regional water had a high TDS, whereas solute data imply low overall solute contents, consistent with dilution by a large component of local recharge. Radiogenic isotope data (U‐series, ⁸⁷Sr/⁸⁶Sr) for tufa indicate that siliciclastic rocks (a regional aquitard) interacted with discharging water. To access this aquitard, regional flow was probably partitioned into a permeable north–south damage zone of a north–south range‐bounding fault along the foot of the Resting Spring Range, which ultimately controlled the location of groundwater discharge. Existing models for modern discharge in the Tecopa Basin, by contrast, call upon westward interbasin flow in carbonate rocks from the Spring Mountains through the intervening (and nearly perpendicular) Nopah and Resting Spring Ranges. Understanding the controls on regional groundwater flow is critical in this and other arid regions where water is, by definition, a scarce resource. Thus, although it is a case study, this report highlights a fruitful approach to palaeohydrology that can be widely applied. Copyright © 2007 John Wiley & Sons, Ltd.     

Paleowind velocity and paleocurrents of pluvial Lake Manly,Death Valley,USA

Pluvial lake deposits are found throughout western North America and are frequently used to reconstruct regional paleoclimate. In Death Valley, California, USA, we apply the beach particle technique (BPT) of Adams (2003), Sedimentology, 50, 565–577 and Adams (2004), Sedimentology, 51, 671–673 to Lake Manly deposits at the Beatty Junction Bar Complex (BJBC), Desolation Canyon, and Manly Terraces and calculate paleowind velocities of 14–27 m/s. These wind velocities are within the range of present-day wind velocities recorded in the surrounding area. Sedimentary structures and clast provenance at Desolation Canyon and the Manly Terraces indicate sediment transport from north to south. Lake level, based on the elevation of constructional features, indicates that the hill west of the BJBC was an island and that the BJBC spits formed during simple lake regression. The data are consistent with the hypothesis that the present wind regime (velocity and direction) formed the pluvial Lake Manly features.     

Fluvial geomorphic features of the Lower Mississippi alluvial valley

The Lower Mississippi Valley (LMV) has been one of the most intensively studied alluvial valleys in the world in terms of it's geological and geomorphic framework and history. A brief outline of the history of the major geological and geomorphological investigations of the LMV is provided. The results of these investigations are discussed in terms of the fluvial geomorphic framework of the valley and the apparent significant changes in the regime of the Mississippi River during the Late Wisconsinan and Holocene stages.

The LMV occupies the broad deep synclinal trough of the Mississippi Embayment which extends from Cairo, Illinois, to the Gulf of Mexico in a slightly sinuous north-south trend. The embayment is filled with a north to south thickening wedge of non-marine and marine sediment ranging in age from Jurassic to Holocene. The major landscapes of the LMV may be considered in four regions: (1) a narrow active meander belt in a broad valley of Late Pleistocene valley train in the northern third; (2) a wide mosaic of interwoven Holocene meander belts in the middle third; (3) a relatively narrow valley of the Atchafalaya Basin bounded on each side by narrow meander belts in the upper part of the lower third; and (4) the broad distributary wedge of the deltaic plain in the southernmost region of the valley. The valley trains vary in age and landform with the oldest occurring as slightly dissected low ridges and the youngest as broad flats separated by shallow interwoven former braided channels. Meander belts formed throughout the Holocene are comprised of low natural levee ridges flanking abandoned courses and bordered by crescent-shaped oxbow lakes and ridge and swale topography. In the middle third of the valley, meander belts are separated by expansive backswamps of very little relief. The deltaic plain is also exceptionally flat, interrupted by the low natural levee ridges of the abandoned deltaic distributaries.

The floodplain of the LMV is a complex mosaic of fluvial features and landscapes within the four landscape regions. Included in this mosaic are abandoned channels and courses, lateral accretion topography of ridges and swales, natural levees, crevasses and crevasse channels, distributary channels, backswamps and rimswamps, alluvial fans and aprons, valley trains (braided stream terraces), lakes and lacustrine deltas, terraces, and the alluvial valley bluff.

Changes in the hydraulic regime of the Lower Mississippi River (LMR) since the Late Pleistocene have played a major role in the development of the landscape of the valley. The most important regime change was the diminishment of the influence of Wisconsinan glaciation in the upper Midwest and the resultant evolution of the Mississippi River from a broad braided outwash channel to a more narrow but sinuous meandering channel at the end of the Pleistocene. During the Holocene, the Mississippi River undoubtedly responded to major climatic changes, rising sea level, tributary stream influence, and possibly tectonism, diapirism, and subsidence through the growth and evolution, and abandonment of it's meander belts and deltas.     

Hydrogeological characterization of Gold Valley: an investigation of precipitation recharge in an intermountain basin in the Death Valley region, California, USA

Gold Valley is typical of intermountain basins in Death Valley National Park (DVNP), California (USA). Using water-balance calculations, a GIS-based analytical model has been developed to estimate precipitational infiltration rates from catchment-scale topographic data (elevation and slope). The calculations indicate that groundwater recharge mainly takes place at high elevations (>1,100?m) during winter (average 1.78?mm/yr). A resistivity survey suggests that groundwater accumulates in upstream compartmentalized reservoirs and that the groundwater flows through basin fill and fractured bedrock. This explains the relationship between the upstream precipitational infiltration in Gold Valley and the downstream spring flow in Willow Creek. To verify the ability of local recharge to support high-flux springs in DVNP, a GIS-based model was also applied to the Furnace Creek catchment. The results produced insufficient total volume of precipitational infiltration to support flow from the main high-flux springs in DVNP under current climatic conditions. This study introduces a GIS-based infiltration model that can be integrated into the Death Valley regional groundwater flow model to estimate precipitational infiltration recharge. In addition, the GIS-based model can efficiently estimate local precipitational infiltration in similar intermountain basins in arid regions provided that the validity of the model is verified.     

Are the Benches at Mormon Point, Death Valley, California, USA, Scarps or Strandlines?

The benches and risers at Mormon Point, Death Valley, USA, have long been interpreted as strandlines cut by still-stands of pluvial lakes correlative with oxygen isotope stage (OIS) 5e/6 (120,000–186,000 yr B.P.) and OIS-2 (10,000–35,000 yr B.P.). This study presents geologic mapping and geomorphic analyses (Gilbert's criteria, longitudinal profiles), which indicate that only the highest bench at Mormon Point (90 m above mean sea level (msl)) is a lake strandline. The other prominent benches on the north-descending slope immediately below this strandline are interpreted as fault scarps offsetting a lacustrine abrasion platform. The faults offsetting the abrasion platform most likely join downward into and slip sympathetically with the Mormon Point turtleback fault, implying late Quaternary slip on this low-angle normal fault. Our geomorphic reinterpretation implies that the OIS-5e/6 lake receded rapidly enough not to cut strandlines and was 90 m deep. Consistent with independent core studies of the salt pan, no evidence of OIS-2 lake strandlines was found at Mormon Point, which indicates that the maximum elevation of the OIS-2 lake surface was −30 m msl. Thus, as measured by pluvial lake depth, the OIS-2 effective precipitation was significantly less than during OIS-5e/6, a finding that is more consistent with other studies in the region. The changed geomorphic context indicates that previous surface exposure dates on fault scarps and benches at Mormon Point are uninterpretable with respect to lake history.     

Surface complexation modeling for predicting solid phase arsenic concentrations in the sediments of the Mississippi River Valley alluvial aquifer, Arkansas, USA

The potential health impact of As in drinking water supply systems in the Mississippi River Valley alluvial aquifer in the state of Arkansas, USA is significant. In this context it is important to understand the occurrence, distribution and mobilization of As in the Mississippi River Valley alluvial aquifer. Application of surface complexation models (SCMs) to predict the sorption behavior of As and hydrous Fe oxides (HFO) in the laboratory has increased in the last decade. However, the application of SCMs to predict the sorption of As in natural sediments has not often been reported, and such applications are greatly constrained by the lack of site-specific model parameters. Attempts have been made to use SCMs considering a component additivity (CA) approach which accounts for relative abundances of pure phases in natural sediments, followed by the addition of SCM parameters individually for each phase. Although few reliable and internally consistent sorption databases related to HFO exist, the use of SCMs using laboratory-derived sorption databases to predict the mobility of As in natural sediments has increased. This study is an attempt to evaluate the ability of the SCMs using the geochemical code PHREEQC to predict solid phase As in the sediments of the Mississippi River Valley alluvial aquifer in Arkansas. The SCM option of the double-layer model (DLM) was simulated using ferrihydrite and goethite as sorbents quantified from chemical extractions, calculated surface-site densities, published surface properties, and published laboratory-derived sorption constants for the sorbents. The model results are satisfactory for shallow wells (10.6 m below ground surface), where the redox condition is relatively oxic or mildly suboxic. However, for the deep alluvial aquifer (21-36.6 m below ground surface) where the redox condition is suboxic to anoxic, the model results are unsatisfactory.     

Last-glacial alluvial fan sedimentation in the Lower Derwent Valley, Tasmania

Alluvial fans of the last glacial age in the lower Derwent Valley in southeastern Tasmania were built by debris flows and stream flows. The deposits were derived from periglacial and nivational slope mantles at the highest altitudes in the fan catchments, and from regolith of uncertain affinities at the lowest elevations. The apical and middle parts of the fans commonly consist of coarse-grained debris flow and water-laid deposits, while the distal deposits are predominantly water-laid sheetflood silts and clays. Channels are important in the proximal parts of the fans and are mostly filled with water-laid sediments, less commonly by debris flow deposits. A first approximation to the mean velocity of the last stage of debris flow in a channel is between 4 m/sec and 6 m/sec. A group of ‘water-laid’ sediments shows very poor separation of particle sizes, and two explanations have been offered for these sediments. Firstly, the large quantities of unsorted debris available from the catchments produced moderately well-sorted slurries, or, secondly, openwork stream gravels were infiltrated by later water flows charged with fines. The streams crossing the fans also produced water flows with relatively low suspended sediment concentrations resulting in reasonably good sorting. The debris flows and ‘water-laid’ muddy sediments cannot be distinguished using CM plots. The debris flows display considerable variation in thickness and grain-size characteristics, which is attributable to properties inherent in debris flow behaviour.     

Hurricane-induced landslide activity on an alluvial fan along Meadow Run, Shenandoah Valley, Virginia (eastern USA)

Although intense rainfall and localized flooding occurred as Hurricane Isabel tracked inland northwestardly across the Blue Ridge Mountains of central Virginia on September 18–19, 2003, few landslides occurred. However, the hurricane reactivated a dormant landslide along a bluff of an incised alluvial fan along Meadow Run on the western flanks of the Blue Ridge Mountains. Subsequent monitoring showed retrogressive movement involving several landslide blocks for the next several months. Using dendrochronology, aerial photography, and stream discharge records revealed periods of landslide activity. The annual variation of growth rings on trees within the landslide suggested previous slope instability in 1937, 1972, 1993, 1997, and 1999, which correlated with periods of local flood events. The avulsive and migrating nature of Meadow Run, combined with strong erosional force potential during flood stages, indicates that landslides are common along the bluff-channel bank interface, locally posing landslide hazards to relatively few structures within this farming region.     

Geochemical and isotopic evidence for upward flow of saline fluid to the Mississippi River Valley alluvial aquifer,southeastern Arkansas,USA

Hydrogeology Journal - Groundwater from the Quaternary Mississippi River Valley Alluvial (MRVA) aquifer in southeastern Arkansas (SE AR), USA, has higher salinity compared to other MRVA...     

浙江中西部永康盆地及金衢盆地白垩系冲积扇特征

浙江众多中小型白垩纪盆地中,分布着河湖相红色沉积岩夹火山岩的白垩系上部地层。作者对位于浙江省金华地区永康市和义乌市境内的2条剖面进行了研究,即金衢盆地早白垩世晚期至晚白垩世早期的铜山岩中戴组剖面和永康盆地早白垩世晚期的方岩景区方岩组剖面,认为其主要为冲积扇沉积,具有多套沉积旋回的陆相碎屑岩准层序组,沉积特征表现为:下部紫红色块状砾岩、砂砾岩,夹泥质粉砂岩,局部有紫红色凝灰岩及深灰色玄武岩;上部棕褐色钙质粉砂岩与泥质粉砂岩组成不等厚互层,产恐龙化石Chilantaisaurus zhejiangensis;具有大型交错层理等沉积构造。其中扇根亚相的砂砾岩为槽流沉积和辫流水道沉积,扇中亚相的片状或席状砂岩为漫流沉积,漫流成因的片状或席状砂岩可能成为良好的油气储集体。此研究成果对中国南方小盆地白垩系扇根—扇中碎屑岩的沉积特征及其成因分析具有重要意义。     

Correction: Geochemical and isotopic evidence for upward flow of saline fluid to the Mississippi River Valley alluvial aquifer,southeastern Arkansas,USA

Hydrogeology Journal - A Correction to this paper has been published: https://doi.org/10.1007/s10040-021-02350-y     

Contrasting morphodynamics in alluvial fans and fan deltas: effect of the downstream boundary

Alluvial fans and fan deltas can, in principle, have exactly the same upstream conditions, but fan deltas by definition have ponding water at their downstream boundary. This ponding creates effects on the autogenic behaviour of fan deltas, such as backwater adaptation, mouth bars and backward sedimentation, whereas alluvial fans may lack these effects. Hence the present authors hypothesize that morphodynamics on alluvial fans are determined primarily by upstream boundary conditions, whereas morphodynamics on fan deltas are determined by both the upstream and the downstream boundary condition and changes therein. To isolate the effects of the upstream and downstream boundaries, five new alluvial fan experiments are compared with the details of three fan deltas published earlier that were formed under very similar and simple conditions. Similar to the fan deltas, the alluvial fans build up by sheet flow, whilst quasi‐regular periods of incision cause temporary channelized flow. Incision is followed by channel backfilling, after which the fan returns to sheet flow. The channelization and backfilling in alluvial fans is markedly less pronounced and more prone to autogenic disturbance than in fan deltas. The difference is caused by morphodynamics at the downstream boundary. In a fan delta, the flow expansion of the channel causes deposition of all the sediment, which forms a mouth bar and causes strong backfilling. In an alluvial fan, on the other hand, the slope break at the fan perimeter causes some deposition, but transport is not reduced to zero. Consequently, the backfilling in alluvial fans is less pronounced than in fan deltas. Other published experiments support this trend: removal of the mouth bar by a river leads to permanent channelization, whilst pronounced mouth‐bar formation in highly channelized deltas promotes backward sedimentation. The experimental results for this study predict that, when alluvial fans prograde into lakes or deep rivers, they transition to fan deltas with increasingly deeper channels and thicker backfill deposits.