2012 Emilia earthquake,Italy: reinforced concrete buildings response

Data of the Italian National Institute of Statistics are collected aimed at characterizing Reinforced Concrete (RC) building stock of the area struck by the 2012 Emilia earthquake (number of storeys, age of construction, structural typology). Damage observations, collected right after the event in reconnaissance reports, are shown and analyzed emphasizing typical weaknesses of RC buildings in the area. The evolution of seismic classification for Emilia region and RC buildings’ main characteristics represent the input data for the assessment of non-structural damage of infilled RC buildings, through a simplified approach (FAST method), based on EMS-98 damage scale. Peak Ground Acceleration (PGA) capacities for the first three damage states of EMS-98 are compared with registered PGA in the epicentral area. Observed damage and damage states evaluated for the PGA of the event, in the epicentral area, are finally compared. The comparison led to a fair agreement between observed and numerical data.     

The effects of repeated earthquake ground motions on the non‐linear response of SDOF systems

In many parts of the world, the repetition of medium–strong intensity earthquake ground motions at brief intervals of time has been observed. The new design philosophies for buildings in seismic areas are based on multi‐level design approaches, which take into account more than a single damageability limit state. According to these approaches, a sequence of seismic actions may produce important consequences on the structural safety. In this paper, the effects of repeated earthquake ground motions on the response of single‐degree‐of‐freedom systems (SDOF) with non‐linear behaviour are analysed. A comparison is performed with the effect of a single seismic event on the originally non‐damaged system for different hysteretic models in terms of pseudo‐acceleration response spectra, behaviour factor q and damage parameters. The elastic–perfect plastic system is the most vulnerable one under repeated earthquake ground motions and is characterized by a strong reduction of the q‐factor. A moment resisting steel frame is analysed as well, showing a reduction of the q‐factor under repeated earthquake ground motions even larger than that of an equivalent SDOF system. Copyright © 2002 John Wiley & Sons, Ltd.     

汶川8.0级地震中汶川县城房屋震害及其加固情况分析

依据5.12汶川地震中汶川县城(威远镇)11个区域共522栋房屋的房屋安全鉴定报告,深入统计分析房屋的震害情况及特点。结果表明,县城房屋倒塌较少,但破坏程度较重。破坏多集中在低层房屋以及砌体结构和木结构,而钢筋混凝土框架及高层房屋破坏较轻。结合房屋的破坏情况,对县城房屋的维修和加固情况进行分类统计,分析维修加固中出现的问题,并提出了相应建议。     

Revision of seismic design codes corresponding to building damagesin the “5.12” Wenchuan earthquake

A large number of buildings were seriously damaged or collapsed in the "5.12" Wenchuan earthquake. Based on field surveys and studies of damage to different types of buildings, seismic design codes have been updated. This paper briefly summarizes some of the major revisions that have been incorporated into the "Standard for classification of seismic protection of building constructions GB50223-2008" and "Code for Seismic Design of Buildings GB50011-2001." The definition of seismic fortification class for buildings has been revisited, and as a result, the seismic classifications for schools, hospitals and other buildings that hold large populations such as evacuation shelters and information centers have been upgraded in the GB50223-2008 Code. The main aspects of the revised GB50011-2001 code include: (a) modification of the seismic intensity specified for the Provinces of Sichuan, Shanxi and Gansu; (b) basic conceptual design for retaining walls and building foundations in mountainous areas; (c) regularity of building configuration; (d) integration of masonry structures and precast RC floors; (e) requirements for calculating and detailing stair shafts; and (f) limiting the use of single-bay RC frame structures. Some significant examples of damage in the epicenter areas are provided as a reference in the discussion on the consequences of collapse, the importance of duplicate structural systems, and the integration of RC and masonry structures.     

Seismic performance of RC school buildings after 2011 Van earthquakes

School buildings have been classified by many of the design codes as important buildings, which have to withstand the earthquake excitations without any or with minor structural damages, and special care has to be given in their design and construction phases. This paper mainly aims to investigate the seismic performance of reinforced-concrete (RC) school buildings after 2011 Van earthquakes. The seismic performances of two damaged RC school buildings located in the earthquake-affected region are studied. First, the capacities of the selected buildings are assessed using nonlinear static procedures, and then, nonlinear dynamic time history analyses are performed to evaluate the seismic performances of the selected RC school buildings. Reasons for the observed damages are discussed. Further, recommendations are provided from the viewpoint of enhancing the structural capacity of the heavily damaged school building. As a result, to get an idea about the ductility demands imposed on the buildings, spectral acceleration values are compared with the seismic coefficients of the code that the buildings were adapted to. It can be concluded that the construction quality and detailing of the reinforcement are the key issues affecting the seismic performance of RC school buildings.     

6th April 2009 L��Aquila earthquake, Italy: reinforced concrete building performance

On 6th April 2009 an earthquake of magnitude M _w =  6.3 occurred in the Abruzzo region; the epicentre was very close to the city of L’Aquila (about 6 km away). The event produced casualties and damage to buildings, lifelines and other infrastructures. An analysis of the main damage that reinforced concrete (RC) structures showed after the event is presented in this study. In order to isolate the main causes of structural and non-structural damage, the seismological characteristics of the event are examined, followed by an analysis of the existing RC building stock in the area. The latter issue came under scrutiny after the release of official data about structural types and times of construction, combined with a detailed review of the most important seismic codes in force in the last 100 years in Italy. Comparison of the current design provisions of the Italian and European codes with previous standards allows the main weaknesses of the existing building stock to be determined. Damage to structural and non-structural elements is finally analyzed thanks to photographic material collected in the first week after the event; the main causes of damage are then inferred.     

Coseismic surface rupture characteristics and earthquake damage analysis of the eastern end of the 2021 MS 7.4 Madoi (Qinghai) earthquake

At 02:04 on May 22, 2021, an M_S 7.4 earthquake occurred in Madoi County in Qinghai Province, China. This earthquake is the largest seismic event in China since the 2008 M_S 8.0 Wenchuan earthquake. Thus, it is critical to investigate surface deformation and damage in time to accurately understand the seismogenic structure of the Madoi earthquake and the seismogenic capacity of the blocks in this region. This study focuses on the Xuema Village, located at the eastern end of the coseismic surface ruptures produced by the event, and assesses the deformation and seismic damage in this area based on field surveys, UAV photogrammetry, and ground penetrating radar (GPR). The results indicate that the rupture scale is substantially smaller at the eastern end of the rupture zone compared to other segments. En echelon type shear tensile fractures are concentrated in a width range of 50–100 m, and the width of single fractures ranges from 20 to 30 cm. In contrast, the degree of seismic damage significantly increases at this site. All of the brick and timber houses are damaged or collapsed, while the steel frame structures and the color steel houses are slightly damaged. More than 80% of the bridge decks on the Changma River Bridge collapse, similar to the terraces along the Youerqu and Changma Rivers and the cut slopes of Provincial Highway S205. We infer that the seismogenic fault of the Madoi earthquake exerts a tail effect in this segment. The tension zone has led to a reduction at the eastern end of the rupture zone, causing shaking damage. Local topography and buildings without earthquake-resistant construction along the strike of the rupture zone have undergone different levels of seismic damage.     

Seismic behavior of asymmetric RC wall buildings: principles and new deformation‐based design method

The seismic design of multi‐story buildings asymmetric in plan yet regular in elevation and stiffened with ductile RC structural walls is addressed. A realistic modeling of the non‐linear ductile behavior of the RC walls is considered in combination with the characteristics of the dynamic torsional response of asymmetric buildings. Design criteria such as the determination of the system ductility, taking into account the location and ductility demand of the RC walls, the story‐drift demand at the softer (most displaced) edge of the building under the design earthquake, the allowable ductility (ultimate limit state) and the allowable story‐drift (performance goals) are discussed. The definition of an eccentricity of the earthquake‐equivalent lateral force is proposed and used to determine the effective displacement profile of the building yet not the strength distribution under the design earthquake. Furthermore, an appropriate procedure is proposed to calculate the fundamental frequency and the earthquake‐equivalent lateral force. A new deformation‐based seismic design method taking into account the characteristics of the dynamic torsional response, the ductility of the RC walls, the system ductility and the story‐drift at the softer (most displaced) edge of the building is presented and illustrated with an example of seismic design of a multi‐story asymmetric RC wall building. Copyright © 2005 John Wiley & Sons, Ltd.     

四川荣县MS4.7、MS4.3、MS4.9地震房屋震害特征和人员伤亡分析

根据四川荣县M_S4.7、M_S4.3、M_S4.9地震现场灾害调查资料,分析房屋震害特征和人员伤亡情况,结果表明震区房屋破坏类型主要为砖混结构、砖木结构和土木结构,其中砖木结构和土木结构受损比较严重,人员伤亡主要由房屋损坏导致;造成此现象的原因主要是该地区房屋建造年代久远,房屋结构不合理、抗震性能差,短时间地震频发造成震害累积,再加上民众防震减灾意识薄弱等。     

Damage evaluation models of reinforced concrete buildings based on the damage statistics and simulated strong motions during the 1995 Hyogo‐ken Nanbu earthquake

We have tried to estimate the yield shear strengths of reinforced concrete (RC) buildings based on the damage statistics in Kobe surveyed after the Hyogo‐ken Nanbu, Japan, earthquake of 1995 and the non‐linear response analyses for synthetic waveforms calculated from a complex seismic source and a three‐dimensional basin structure. First, a set of building models that represented the RC building stock in Kobe was constructed and plausible non‐linear multi‐degree‐of‐freedom models with four different numbers of stories were created based on the current seismic code and construction practice. For response analysis the damage criterion and the strength distribution should be assumed a priori. When the damage ratios for these standard models were calculated it was found that the damage ratios were so high that we had to increase the average yield strengths in order to match the calculated damage ratios to those observed. After searching the best models it was found that the estimated average yield strengths should be much higher than those based on the code, especially for low‐rise buildings. Using this set of building models we succeeded in reproducing the belt‐shaped area with high damage ratios in Kobe. One can apply the proposed methodology to different countries if there is enough damage data, strong motion records, and building statistics. If there is sparse damage data at several locations only, then our models can be adjusted to reproduce observed damage data and used for damage prediction as a first‐order approximation. Copyright © 2004 John Wiley & Sons, Ltd.     

Performance-based seismic design of nonstructural building components:The next frontier of earthquake engineering

With the development and implementation of performance-based earthquake engineering,harmonization of performance levels between structural and nonstructural components becomes vital. Even if the structural components of a building achieve a continuous or immediate occupancy performance level after a seismic event,failure of architectural,mechanical or electrical components can lower the performance level of the entire building system. This reduction in performance caused by the vulnerability of nonstructural components has been observed during recent earthquakes worldwide. Moreover,nonstructural damage has limited the functionality of critical facilities,such as hospitals,following major seismic events. The investment in nonstructural components and building contents is far greater than that of structural components and framing. Therefore,it is not surprising that in many past earthquakes,losses from damage to nonstructural components have exceeded losses from structural damage. Furthermore,the failure of nonstructural components can become a safety hazard or can hamper the safe movement of occupants evacuating buildings,or of rescue workers entering buildings. In comparison to structural components and systems,there is relatively limited information on the seismic design of nonstructural components. Basic research work in this area has been sparse,and the available codes and guidelines are usually,for the most part,based on past experiences,engineering judgment and intuition,rather than on objective experimental and analytical results. Often,design engineers are forced to start almost from square one after each earthquake event: to observe what went wrong and to try to prevent repetitions. This is a consequence of the empirical nature of current seismic regulations and guidelines for nonstructural components. This review paper summarizes current knowledge on the seismic design and analysis of nonstructural building components,identifying major knowledge gaps that will need to be filled by future research. Furthermore,considering recent trends in earthquake engineering,the paper explores how performance-based seismic design might be conceived for nonstructural components,drawing on recent developments made in the field of seismic design and hinting at the specific considerations required for nonstructural components.     

Characteristics of Seismic Damage of Buildings: Constraints from Tilt Photography Technology

In this paper, the tilt photography data acquisition and three-dimensional modeling of the Tashkurgan M_S5.5 earthquake in Xinjiang are conducted using the tilt photography system of the Rotor UAV. The three-dimensional model is used to interpret the earthquake damage on buildings in the mega-earthquake area in order to acquire different-level house damage in the Kuzirun village disaster area. In addition, the characteristics of seismic damage on typical buildings are analyzed. The results show that the main collapsed houses in the mega-earthquake area are sand-stone buildings, of which about 39% are sand-stone buildings. Several brick-wood buildings and brick-concrete buildings are seriously damaged, while the buildings with frame structures are mainly slightly damaged, and the houses near the macro-epicenter of the earthquake are all in good conditions. Three-dimensional tilt photography technology can vividly display the scene of earthquake disaster, and can provide significant demonstration in building damage degree together with detailed analysis of disaster situation.     

Softening effects of RC nonstructural flat walls on ductile concrete buildings

Nonstructural reinforced concrete flat walls architecturally designed as exterior/partition walls in concrete buildings were severely damaged by the 2011 earthquake off the Pacific coast of Tohoku. This damage was observed in the monolithic nonstructural flat walls of relatively old ductile concrete buildings. Although these flat walls might affect the overall seismic performance and behavior of a building, the nonstructural wall effects have not been clarified because of the complex interactions among the structural components. To understand these effects, this paper conducts an experimental and numerical investigation of the nonstructural wall effects, focusing on a typical residential building damaged by the 2011 earthquake. A single‐story, one‐bay moment‐resisting frame model of the building with a nonstructural flat wall was tested to clarify the fundamental behavior. The results reveal that the wall significantly contributed to the seismic performance of the overall frame until it failed in shear, subsequently losing structural effectiveness. Such experimental wall behavior could be simulated by the isoparametric element model. Moreover, the structural effects of the nonstructural flat walls on the global seismic performance and behavior of the investigated building were discussed through earthquake response analyses using ground motions recorded near the building site and pushover analyses. Consequently, the building damage could be simulated in an analytical case considering the nonstructural flat walls, showing larger inter‐story drifts in the lower stories due to softening of the walls. The analytical results also indicated that the softening of the nonstructural flat walls decreased the building ductility, as defined by ultimate inter‐story drifts. Copyright © 2017 John Wiley & Sons, Ltd.     

Study on vulnerability matrices of masonry buildings of mainland China

The degree and distribution of damage to buildings subjected to earthquakes is a concern of the Chinese Government and the public. Seismic damage data indicates that seismic capacities of different types of building structures in various regions throughout mainland China are different. Furthermore, the seismic capacities of the same type of structure in different regions may vary. The contributions of this research are summarized as follows: 1) Vulnerability matrices and earthquake damage matrices of masonry structures in mainland China were chosen as research samples. The aim was to analyze the differences in seismic capacities of sample matrices and to present general rules for categorizing seismic resistance. 2) Curves relating the percentage of damaged masonry structures with different seismic resistances subjected to seismic demand in different regions of seismic intensity (VI to X) have been developed. 3) A method has been proposed to build vulnerability matrices of masonry structures. The damage ratio for masonry structures under high-intensity events such as the Ms 6.1 Panzhihua earthquake in Sichuan province on 30 August 2008, was calculated to verify the applicability of this method. This research offers a significant theoretical basis for predicting seismic damage and direct loss assessment of groups of buildings, as well as for earthquake disaster insurance.     

Simulation analyses of buildings damaged in the 1995 Kobe,Japan, earthquake considering soil–structure interaction

A series of studies was conducted on three buildings of steel reinforced concrete structures with RC shear walls damaged in the 1995 Hyogo-ken Nanbu earthquake. These buildings are located in an area where structural damage centred around. Two of these buildings suffered severe damage, while the third was not structurally damaged. Our studies deal with site inspections, including micro-tremor measurement of buildings, the evaluation of input motions, and the response analyses considering soil–structure interaction. The results of simulation analyses of the two severely damaged buildings correspond to their actual damage state. From the response analyses of the one slender building with no structural damage, it was concluded that uplifting is the main reason it did not suffer any structural damage. Through these studies, the importance of soil–structure interaction and effective input motion is fully understood. Copyright © 1999 John Wiley & Sons, Ltd.     

Rapid report of seismic damage to buildings in the 2022 M 6.8 Luding earthquake,China

The report summarizes the observed damage to a variety of buildings near the epicenter of the M6.8 Luding earthquake in Sichuan Province, China. They include base-isolated buildings, multi-story reinforced concrete (RC) frame buildings, and masonry buildings. The near-field region is known to be tectonically highly active, and the local intensity level is the highest, that is, 0.4g peak ground acceleration (PGA) for the design basis earthquake, in the Chinese zonation of seismic ground motion parameters. The extent of damage ranged from the weak-story collapse that claimed lives to the extensive nonstructural damage that suspended occupancy. The report highlights the first observation of the destruction of rubber bearings and viscous dampers in the isolation layer of Chinese seismically isolated buildings. It also features the rare observation of the brittle shear failure of RC columns in moment-resisting frames in a region of such a high seismic design requirement. Possible reasons that may have attributed to the reported damage are suggested by providing facts observed in the field. However, careful forensic analyses are needed before any conclusive judgment can be made.     

A fuzzy–random analysis model for seismic performance of framed structures incorporating structural and non‐structural damage

Past earthquake experiences indicate that most buildings designed in accordance with modern seismic design codes could survive moderate‐to‐strong earthquakes; however, the financial loss due to repairing cost and the subsequent business interruption can be unacceptable. Designing building structures to meet desired performance targets has become a clear direction in future seismic design practice. As a matter of fact, the performance of buildings is affected by structural as well as non‐structural components, and involves numerous uncertainties. Therefore, appropriate probabilistic approach taking into account structural and non‐structural damages is required. This paper presents a fuzzy–random model for the performance reliability analysis of RC framed structures considering both structural and non‐structural damages. The limit state for each performance level is defined as an interval of inter‐storey drift ratios concerning, respectively, the non‐structural and structural damage with a membership function, while the relative importance of the two aspects is reflected through the use of an appropriate cost function. To illustrate the methodology, herein the non‐structural damage is represented by infill masonry walls. The probabilistic drift limits for RC components and masonry walls from the associated studies are employed to facilitate the demonstration of the proposed model in an example case study. The results are compared with those obtained using classical reliability model based on single‐threshold performance definition. The proposed model provides a good basis for incorporating different aspects into the performance assessment of a building system. Copyright © 2005 John Wiley & Sons, Ltd.     

Simplified design procedure for frame buildings with viscoelastic or elastomeric structural dampers

A simplified design procedure (SDP) for preliminary seismic design of frame buildings with structural dampers is presented. The SDP uses elastic‐static analysis and is applicable to structural dampers made from viscoelastic (VE) or high‐damping elastomeric materials. The behaviour of typical VE materials and high‐damping elastomeric materials is often non‐linear, and the SDP idealizes these materials as linear VE materials. With this idealization, structures with VE or high‐damping elastomeric dampers can be designed and analysed using methods based on linear VE theory. As an example, a retrofit design for a typical non‐ductile reinforced concrete (RC) frame building using high‐damping elastomeric dampers is developed using the SDP. To validate the SDP, results from non‐linear dynamic time history analyses (NDTHA) are presented. Results from NDTHA demonstrate that the SDP estimates the seismic response with sufficient accuracy for design. It is shown that a non‐ductile RC frame building can be retrofit with high‐damping elastomeric dampers to remain essentially elastic under the design basis earthquake (DBE). Copyright © 2005 John Wiley & Sons, Ltd.     

Development of damage probability matrices based on Greek earthquake damage data

A comprehensive study is presented for empirical seismic vulnerability assessment of typical structural types, representative of the building stock of Southern Europe, based on a large set of damage statistics. The observational database was obtained from post-earthquake surveys carried out in the area struck by the September 7, 1999 Athens earthquake. After analysis of the collected observational data, a unified damage database has been created which comprises 180,945 damaged buildings from/after the near-field area of the earthquake. The damaged buildings are classified in specific structural types, according to the materials, seismic codes and construction techniques in Southern Europe. The seismic demand is described in terms of both the regional macroseismic intensity and the ratio αg/ao, where αg is the maximum peak ground acceleration (PGA) of the earthquake event and ao is the unique value PGA that characterizes each municipality shown on the Greek hazard map. The relative and cumulative frequencies of the different damage states for each structural type and each intensity level are computed in terms of damage ratio. Damage probability matrices (DPMs) and vulnerability curves are obtained for specific structural types. A comparison analysis is fulfilled between the produced and the existing vulnerability models.