共查询到20条相似文献,搜索用时 31 毫秒
1.
We analyze the impact of a linear trend in the mean log-conductivity on the transport of a conservative tracer in a bounded domain. The effects of such a linear trend on solute transport were analyzed in depth for unbounded domains (Rubin and Seong, Water Resour Res 30(11):2901–2911, 1994; Indelman and Rubin, Water Resour Res 31(5):1257–1265, 1995; Water Resour Res 32(5):1257–1265, 1996), whereas studies concerning this special case of medium nonstationarity in finite domains usually focus on head or flow statistics (Guadagnini et al., Stoch Environ Res Risk Assess, 17:394–407, 2003). In this study both ensemble and effective plume moments are provided for an instantaneous release of a solute through a linear source normal to the mean flow direction, by taking into account different sizes of the source. The analysis involving a steady velocity field spatially nonstationary is developed by using the stochastic finite element method. Results show that ensemble moments are affected by increasing trends both parallel and normal to the mean flow direction, but the impact on effective plume moments is very different. A parallel trend does not seem to influence the effective second moments; while a normal trend, although modifies the transverse effective moment only weakly, strongly increases the longitudinal one, especially for large initial sizes of the source. Furthermore, the increase of the particle displacement variance produced by a parallel trend in the finite domain disagrees with the results obtained in an unbounded domain, due to the boundary conditions here considered making both head and velocity moments nonstationary and nonsymmetric. 相似文献
2.
Z. J. Kabala 《Stochastic Environmental Research and Risk Assessment (SERRA)》1997,11(4):331-348
Under the assumption that local solute dispersion is negligible, a new general formula (in the form of a convolution integral)
is found for the arbitrary k-point ensemble moment of the local concentration of a solute convected in arbitrary m spatial
dimensions with general sure initial conditions. From this general formula new closed-form solutions in m=2 spatial dimensions
are derived for 2-point ensemble moments of the local solute concentration for the impulse (Dirac delta) and Gaussian initial
conditions. When integrated over an averaging window, these solutions lead to new closed-form expressions for the first two
ensemble moments of thevolume-averaged solute concentration and to the corresponding concentration coefficients of variation (CV). Also, for the impulse (Dirac delta) solute concentration
initial condition, the second ensemble moment of thesolute point concentration in two spatial dimensions and the corresponding CV are demonstrated to be unbound. For impulse initial conditions the CVs
for volume-averaged concentrations axe compared with each other for a tracer from the Borden aquifer experiment. The point-concentration
CV is unacceptably large in the whole domain, implying that the ensemble mean concentration is inappropriate for predicting
the actual concentration values. The volume-averaged concentration CV decreases significantly with an increasing averaging
volume. Since local dispersion is neglected, the new solutions should be interpreted as upper limits for the yet to be derived
solutions that account for local dispersion; and so should the presented CVs for Borden tracers. The new analytical solutions
may be used to test the accuracy of Monte Carlo simulations or other numerical algorithms that deal with the stochastic solute
transport. They may also be used to determine the size of the averaging volume needed to make a quasi-sure statement about
the solute mass contained in it. 相似文献
3.
《Advances in water resources》2001,24(6):607-619
Solute discharge moments (mean and variance) are computed using numerical modeling of flow and advective transport in two-dimensional heterogeneous aquifers and are compared to theoretical results. The solute discharge quantifies the temporal evolution of the total contaminant mass crossing a certain compliance boundary. In addition to analyzing the solute discharge moments within a classical absolute dispersion framework, we also analyze relative dispersion formulation, whereby plume meandering (deviation from mean flow path caused by velocity variations at scales larger than plume size) is removed. This study addresses some important issues related to the computation of solute discharge moments from random walk particle tracking experiments, and highlights some of the important differences between absolute and relative dispersion frameworks. Relative dispersion formulation produces maximum uncertainty that coincides with the peak mean discharge. Absolute dispersion, however, results in earlier arrival of the uncertainty peak as compared to the first moment peak. Simulations show that the standard deviation of solute discharge in a relative dispersion framework requires increasingly large temporal sampling windows to smooth out some of the large fluctuations in breakthrough curves associated with advective transport. Using smoothing techniques in particle tracking to distribute the particle mass over a volume rather than at a point significantly reduces the noise in the numerical simulations and removes the need to use large temporal windows. Same effect can be obtained by adding a local dispersion process to the particle tracking experiments used to model advective transport. The effect of the temporal sampling window bears some relevance and important consequences for evaluating risk-related parameters. The expected value of peak solute discharge and its standard deviation are very sensitive to this sampling window and so will be the risk distribution relying on such numerical models. 相似文献
4.
Transport of sorbing solutes in 2D steady and heterogeneous flow fields is modeled using a particle tracking random walk technique. The solute is injected as an instantaneous pulse over a finite area. Cases of linear and Freundlich sorption isotherms are considered. Local pore velocity and mechanical dispersion are used to describe the solute transport mechanisms at the local scale. This paper addresses the impact of the degree of heterogeneity and correlation lengths of the log-hydraulic conductivity field as well as negative correlation between the log-hydraulic conductivity field and the log-sorption affinity field on the behavior of the plume of a sorbing chemical. Behavior of the plume is quantified in terms of longitudinal spatial moments: center-of-mass displacement, variance, 95% range, and skewness. The range appears to be a better measure of the spread in the plumes with Freundlich sorption because of plume asymmetry. It has been found that the range varied linearly with the travelled distance, regardless of the sorption isotherm. This linear relationship is important for extrapolation of results to predict behavior beyond simulated times and distances. It was observed that the flow domain heterogeneity slightly enhanced the spreading of nonlinearly sorbing solutes in comparison to that which occurred for the homogeneous flow domain, whereas the spreading enhancement in the case of linear sorption was much more pronounced. In the case of Freundlich sorption, this enhancement led to further deceleration of the solute plume movement as a result of increased retardation coefficients produced by smaller concentrations. It was also observed that, except for plumes with linear sorption, correlation between the hydraulic conductivity and the sorption affinity fields had minimal effect on the spatial moments of solute plumes with nonlinear sorption. 相似文献
5.
《Advances in water resources》1998,21(6):487-498
Transport of a sorbing solute in a two-dimensional steady and uniform flow field is modeled using a particle tracking random walk method. The solute is initially introduced from an instantaneous point source. Cases of linear and nonlinear sorption isotherms are considered. Local pore velocity and mechanical dispersion are used to describe the solute transport mechanisms at the local scale. The numerical simulation of solute particle transport yields the large scale behavior of the solute plume. Behavior of the plume is quantified in terms of the center-of-mass displacement distance, relative velocity of the center-of-mass, mass breakthrough curves, spread variance, and longitudinal skewness. The nonlinear sorption isotherm affects the plume behavior in the following way relative to the linear isotherm: (1) the plume velocity decreases exponentially with time; (2) the longitudinal variance increases nonlinearly with time; (3) the solute front is steepened and tailing is enhanced 相似文献
6.
We investigate effective solute transport in a chemically heterogeneous medium subject to temporal fluctuations of the flow conditions. Focusing on spatial variations in the equilibrium adsorption properties, the corresponding fluctuating retardation factor is modeled as a stationary random space function. The temporal variability of the flow is represented by a stationary temporal random process. Solute spreading is quantified by effective dispersion coefficients, which are derived from the ensemble average of the second centered moments of the normalized solute distribution in a single disorder realization. Using first-order expansions in the variances of the respective random fields, we derive explicit compact expressions for the time behavior of the disorder induced contributions to the effective dispersion coefficients. Focusing on the contributions due to chemical heterogeneity and temporal fluctuations, we find enhanced transverse spreading characterized by a transverse effective dispersion coefficient that, in contrast to transport in steady flow fields, evolves to a disorder-induced macroscopic value (i.e., independent of local dispersion). At the same time, the asymptotic longitudinal dispersion coefficient can decrease. Under certain conditions the contribution to the longitudinal effective dispersion coefficient shows superdiffusive behavior, similar to that observed for transport in s stratified porous medium, before it decreases to its asymptotic value. The presented compact and easy to use expressions for the longitudinal and transverse effective dispersion coefficients can be used for the quantification of effective spreading and mixing in the context of the groundwater remediation based on hydraulic manipulation and for the effective modeling of reactive transport in heterogeneous media in general. 相似文献
7.
Garrison Sposito 《Advances in water resources》1997,20(5-6)
Solute plume spreading in an aquifer exhibits a ‘scale effect’ if the second spatial concentration moment of a plume has a non-constant time-derivative. Stochastic approaches to modeling this scale effect often rely on the critical assumption that ensemble averages can be equated to spatial averages measured in a single field experiment. This ergodicity assumption should properly be evaluated in a strictly dynamical context, and this is done in the present paper. For the important case of trace plume convection by steady groundwater flow in an isotropic, heterogeneous aquifer, ergodicity does not obtain because of the existence of an invariant function on stream surfaces that is not uniform throughout the aquifer. The implications of this result for stochastic models of solute transport are discussed. © 1997 Elsevier Science Ltd. All rights reserved 相似文献
8.
A comprehensive numerical study was undertaken to investigate transport of a variable-density, conservative solute plume in an unconfined coastal aquifer subject to high and low frequency oceanic forcing. The model combined variable-density saturated flow for groundwater and solute transport, and wave hydrodynamics from a 2D Navier–Stokes solver. A sinusoidal tidal signal was specified by implementing time-varying heads at the seaward boundary. The solute plume behavior was investigated under different oceanic forcing conditions: no forcing, waves, tide, and combined waves and tide. For each forcing condition, four different injected solute densities (freshwater, brackish water, seawater, brine) were used to investigate the effects of density on the transport of the injected plume beneath and across the beach face. The plume’s low-order spatial moments were computed, viz., mass, centroid, variance and aspect ratio. The results confirmed that both tide- and wave-forcing produce an upper saline plume beneath the beach face in addition to the classical saltwater wedge. For the no-forcing and tide-only cases (during rising tides), an additional small circulation cell below the beach face was observed. Oceanic forcing affects strongly the solute plume’s flow path, residence time and discharge rate across the beach face, as well as its spreading. For the same oceanic forcing, solute plumes with different densities follow different trajectories from the source to the discharge location (beach face). The residence time and plume spreading increased with plume density. It was concluded that simulations that neglect the effect of waves or tides cannot reproduce accurately solute plume dispersion and also, in the case of coasts with small waves or tides, the solute residence time in the aquifer. 相似文献
9.
Solute transport in heterogeneous media: The impact of anisotropy and non-ergodicity in risk assessment 总被引:1,自引:1,他引:0
X. Sánchez-Vila J. Solís-Delfín 《Stochastic Environmental Research and Risk Assessment (SERRA)》1999,13(5):365-379
Conceptual model selection is a key issue in risk assessment studies. We analyze the effect of a number of conceptual aspects
related to solute transport in two-dimensional heterogeneous media. The main issues addressed are non-ergodicity, anisotropy
in the correlation structure of the transmissivity field, and dispersion at the local scale. In particular, we study the development
of a solute plume when mean flow is oriented at an angle with respect to the principal directions of anisotropy. The study
is carried out in a Lagrangian framework using Monte Carlo analysis.
Of special interest is the evolution of individual plumes. A number of aspects are analyzed, namely the location of the center
of mass for each plume and the different ways to compute the angles that the main axes of the plume develop with respect to
the direction of the mean flow. Stochastic theories based upon ergodicity conclude that the plume gets oriented in the mean
flow direction. In our non-ergodic simulations, the mean of the offset angles, for each individual plume in each particular
realization, is offset from the mean flow direction towards the direction of maximum anisotropy. If, instead, the analysis
is performed on the ensemble plume (superposition of all different simulations), it is then found oriented closer to the direction
of the mean flow than the average offset angle for the different plumes considered separately. This last result adds an extra
word of caution to the use of ensemble averaged values in solute transport studies.
Serious implications for risk assessment follow from the conceptual model adopted. First, in any single realization there
will a large uncertainty in locating the plume at any given time; second, real dilution would be less than what would be expected
if the macrodispersion values obtained for ergodic conditions were applied; third, the volume that is affected by a non-zero
concentration is smaller than that predicted from macrodispersion concepts; fourth, the orientation of the plume does not
correspond to that of the mean flow; and fifth, accounting for local dispersion helps reducing uncertainty. 相似文献
10.
Chunlin Huang Bill X. Hu Xin Li Ming Ye 《Stochastic Environmental Research and Risk Assessment (SERRA)》2009,23(8):1155-1167
Hydraulic conductivity distribution and plume initial source condition are two important factors affecting solute transport
in heterogeneous media. Since hydraulic conductivity can only be measured at limited locations in a field, its spatial distribution
in a complex heterogeneous medium is generally uncertain. In many groundwater contamination sites, transport initial conditions
are generally unknown, as plume distributions are available only after the contaminations occurred. In this study, a data
assimilation method is developed for calibrating a hydraulic conductivity field and improving solute transport prediction
with unknown initial solute source condition. Ensemble Kalman filter (EnKF) is used to update the model parameter (i.e., hydraulic
conductivity) and state variables (hydraulic head and solute concentration), when data are available. Two-dimensional numerical
experiments are designed to assess the performance of the EnKF method on data assimilation for solute transport prediction.
The study results indicate that the EnKF method can significantly improve the estimation of the hydraulic conductivity distribution
and solute transport prediction by assimilating hydraulic head measurements with a known solute initial condition. When solute
source is unknown, solute prediction by assimilating continuous measurements of solute concentration at a few points in the
plume well captures the plume evolution downstream of the measurement points. 相似文献
11.
12.
The concentration fluctuations resulting from hazardous releases in the subsurface are modeled through the concentration moments. The local solute exposure concentration, resulting from the heterogeneous velocity field and pore scale dispersion in the subsurface, is a random function characterized by its statistical moments. The approximate solution to the exact equation that describes the evolution of concentration standard moments in the aquifer transport is proposed in a recursive form. The expressions for concentration second, third and fourth central moments are derived and evaluated for various flow and transport conditions. The solutions are sought by starting from the exact upper bound solution with the zero pore scale dispersion and introducing the physically based approximation that allows the inclusion of the pore scale dispersion resulting in simple closed-form expressions for the concentration statistical moments. The concentration moments are also analyzed in the relative and absolute frame of reference indicating their combined importance in the practical cases of the subsurface contaminant plume migration. The influence of pore scale dispersion with different source sizes and orientations are analyzed and discussed with respect to common cases in the environmental risk assessment problems. The results are also compared with the concentration measurements of the conservative tracer collected in the field experiments at Cape Cod and Borden Site. 相似文献
13.
Hakan Sirin 《Stochastic Environmental Research and Risk Assessment (SERRA)》2006,20(6):381-390
Solute plume subjected to field scale hydraulic conductivity heterogeneity shows a large dispersion/macrodispersion, which is the manifestation of existing fields scale heterogeneity on the solute plume. On the other hand, due to the scarcity of hydraulic conductivity measurements at field scale, hydraulic conductivity heterogeneity can only be defined statistically, which makes the hydraulic conductivity a random variable/function. Random hydraulic conductivity as a parameter in flow equation makes the pore flow velocity also random and the ground water solute transport equation is a stochastic differential equation now. In this study, the ensemble average of stochastic ground water solute transport equation is taken by the cumulant expansion method in order to upscale the laboratory scale transport equation to field scale by assuming pore flow velocity is a non stationary, non divergence-free and unsteady random function of space and time. Besides the stochastic explanation of macrodispersion and the velocity correction term obtained by Kavvas and Karakas (J Hydrol 179:321–351, 1996) before a new velocity correction term, which is a function of mean pore flow velocity divergence, is obtained in this study due to strict second order cumulant expansion (without omitting any term after the expansion) performed. The significance of the new velocity correction term is investigated on a one dimensional transport problem driven by a density dependent flow field. 相似文献
14.
A Eulerian analytical method is developed for nonreactive solute transport in heterogeneous, dual-permeability media where the hydraulic conductivities in fracture and matrix domains are both assumed to be stochastic processes. The analytical solution for the mean concentration is given explicitly in Fourier and Laplace transforms. Instead of using the fast fourier transform method to numerically invert the solution to real space (Hu et al., 2002), we apply the general relationship between spatial moments and concentration (Naff, 1990; Hu et al., 1997) to obtain the analytical solutions for the spatial moments up to the second for a pulse input of the solute. Owing to its accuracy and efficiency, the analytical method can be used to check the semi-analytical and Monte Carlo numerical methods before they are applied to more complicated studies. The analytical method can be also used during screening studies to identify the most significant transport parameters for further analysis. In this study, the analytical results have been compared with those obtained from the semi-analytical method (Hu et al., 2002) and the comparison shows that the semi-analytical method is robust. It is clearly shown from the analytical solution that the three factors, local dispersion, conductivity variation in each domain and velocity convection flow difference in the two domains, play different roles on the solute plume spreading in longitudinal and transverse directions. The calculation results also indicate that when the log-conductivity variance in matrix is 10 times less than its counterpart in fractures, it will hardly influence the solute transport, whether the conductivity field is matrix is treated as a homogeneous or random field. 相似文献
15.
Pore-scale dispersion (PSD), aquifer heterogeneity, sampling volume, and source size influence solute concentrations of conservative tracers transported in heterogeneous porous formations. In this work, we developed a new set of analytical solutions for the concentration ensemble mean, variance, and coefficient of variation (CV), which consider the effects of all these factors. We developed these models as generalizations of the first-order solutions in the log-conductivity variance of point concentration proposed by [Fiori A, Dagan G. Concentration fluctuations in aquifer transport: a rigorous first-order solution and applications. J Contam Hydrol 2000;45(1–2):139–163]. Our first-order solutions compare well with numerical simulations for small and moderate formation heterogeneity and from small to large sampling and source volumes. However, their performance deteriorates for highly heterogeneous formations. Successively, we used our models to study the interplay among sampler size, source volume, and PSD. Our analysis shows a complex and important interaction among these factors. Additionally, we show that the relative importance of these factors is also a function of plume age, of aquifer heterogeneity, and of the measurement location with respect to the mean plume center of gravity. We found that the concentration moments are chiefly controlled by the sampling volume with pore-scale dispersion playing a minor role at short times and for small source volumes. However, the effect of the source volume cannot be neglected when it is larger than the sampling volume. A different behavior occurs for long periods, which may be relevant for old contaminations, or for small injection volumes. In these cases, PSD causes a significant dilution, which is reflected in the concentration statistics. Additionally, at the center of the mean plume, where high concentrations are most likely to occur, we found that sampling volume and PSD are attenuating mechanisms for both concentration ensemble mean and coefficient of variation, except at very large source and sampler sizes, where the coefficient of variation increases with sampler size and PSD. Formation heterogeneity causes a faster reduction of the ensemble mean concentrations and a larger uncertainty at the center of the mean plume. Therefore, our results highlight the importance of considering the combined effect of formation heterogeneity, exposure volume, PSD, source size, and measurement location in performing risk assessment. 相似文献
16.
17.
Matheron and de Marsily [Matheron M, de Marsily G. Is the transport in porous media always diffusive? A counter-example. Water Resour Res 1980;16:901–17] studied transport in a perfectly stratified infinite medium as an idealized aquifer model. They observed superdiffusive solute spreading quantified by anomalous increase of the apparent longitudinal dispersion coefficient with the square root of time. Here, we investigate solute transport in a vertically bounded stratified random medium. Unlike for the infinite medium at asymptotically long times, disorder-induced mixing and spreading is uniquely quantified by a constant Taylor dispersion coefficient. Using a stochastic modeling approach we study the effective mixing and spreading dynamics at pre-asymptotic times in terms of effective average transport coefficients. The latter are defined on the basis of local moments, i.e., moments of the transport Green function. We investigate the impact of the position of the initial plume and the initial plume size on the (highly anomalous) pre-asymptotic effective spreading and mixing dynamics for single realizations and in average. Effectively, the system “remembers” its initial state, the effective transport coefficients show so-called memory effects, which disappear after the solute has sampled the full vertical extent of the medium. We study the impact of the intrinsic non-ergodicity of the confined medium on the validity of the stochastic modeling approach and study in this context the transition from the finite to the infinite medium. 相似文献
18.
Jichun Wu Bill X. Hu 《Stochastic Environmental Research and Risk Assessment (SERRA)》2007,21(6):665-682
The unconditional stochastic studies on groundwater flow and solute transport in a nonstationary conductivity field show that
the standard deviations of the hydraulic head and solute flux are very large in comparison with their mean values (Zhang et al.
in Water Resour Res 36:2107–2120, 2000; Wu et al. in J Hydrol 275:208–228, 2003; Hu et al. in Adv Water Resour 26:513–531, 2003). In this study, we develop a numerical method of moments conditioning on measurements of hydraulic conductivity and head
to reduce the variances of the head and the solute flux. A Lagrangian perturbation method is applied to develop the framework
for solute transport in a nonstationary flow field. Since analytically derived moments equations are too complicated to solve
analytically, a numerical finite difference method is implemented to obtain the solutions. Instead of using an unconditional
conductivity field as an input to calculate groundwater velocity, we combine a geostatistical method and a method of moment
for flow to conditionally simulate the distributions of head and velocity based on the measurements of hydraulic conductivity
and head at some points. The developed theory is applied in several case studies to investigate the influences of the measurements
of hydraulic conductivity and/or the hydraulic head on the variances of the predictive head and the solute flux in nonstationary
flow fields. The study results show that the conditional calculation will significantly reduce the head variance. Since the
hydraulic head measurement points are treated as the interior boundary (Dirichlet boundary) conditions, conditioning on both
the hydraulic conductivity and the head measurements is much better than conditioning only on conductivity measurements for
reduction of head variance. However, for solute flux, variance reduction by the conditional study is not so significant. 相似文献
19.
Y.-K. Zhang B.-M. Seo 《Stochastic Environmental Research and Risk Assessment (SERRA)》2004,18(3):205-215
Numerical simulations of non-ergodic transport of a non-reactive solute plume by steady-state groundwater flow under a uniform mean velocity, , were conducted in a three-dimensional heterogeneous and statistically isotropic aquifer. The hydraulic conductivity, K(x), is modeled as a random field which is assumed to be log-normally distributed with an exponential covariance. Significant efforts are made to reduce the simulation uncertainties. Ensemble averages of the second spatial moments of the plume and the plume centroid variances were simulated with 1600 Monte Carlo (MC) runs for three variances of log K, Y2=0.09, 0.23, and 0.46, and a square source normal to of three dimensionless lengths. It is showed that 1600 MC runs are needed to obtain stabilized results in mildly heterogeneous aquifers of Y20.5 and that large uncertainty may exist in the simulated results if less MC runs are used, especially for the transverse second spatial moments and the plume centroid variance in transverse directions. The simulated longitudinal second spatial moment and the plume centroid variance in longitudinal direction fit well to the first-order theoretical results while the simulated transverse moments are generally larger than the first-order values. The ergodic condition for the second spatial moments is far from reaching in all cases simulated and transport in transverse directions may reach ergodic condition much slower than that in longitudinal direction. 相似文献
20.
A Lagrangian perturbation method is applied to develop a method of moments for solute flux through a three-dimensional nonstationary flow field. The flow nonstationarity stems from medium nonstationarity and internal and external boundaries of the study domain. The solute flux is described as a space-time process where time refers to the solute flux breakthrough through a control plane (CP) at some distance downstream of the solute source and space refers to the transverse displacement distribution at the CP. The analytically derived moment equations for solute transport in a nonstationarity flow field are too complicated to solve analytically, a numerical finite difference method is implemented to obtain the solutions. This approach combines the stochastic model with the flexibility of the numerical method to boundary and initial conditions. The developed method is applied to study the effects of heterogeneity and nonstationarity of the hydraulic conductivity and chemical sorption coefficient on solute transport. The study results indicate all these factors will significantly influence the mean and variance of solute flux. 相似文献