地下圆形衬砌隧道对沿线地震动的影响(Ⅰ):级数解

利用波函数展开法，给出了地下圆形衬砌隧道对入射平面P波和SV波散射问题的一个级数解答，当衬砌与半空间介质相同时，该解答退化为文献中的无衬砌隧道的解答。级数解答为进一步定量研究隧道对入射平面P波和SV波的放大作用以及入射波长、入射角度、隧道直径和衬砌刚度等参数对隧道沿线地震动的影响奠定了理论基础。     

地下圆形衬砌隧道对沿线地震动的影响(I):级数解

利用波函数展开法,给出了地下圆形衬砌隧道对入射平面P波和SV波散射问题的一个级数解答,当衬砌与半空间介质相同时,该解答退化为文献中的无衬砌隧道的解答。级数解答为进一步定量研究隧道对入射平面P波和SV波的放大作用以及入射波长、入射角度、隧道直径和衬砌刚度等参数对隧道沿线地震动的影响奠定了理论基础。     

Dynamic response of a non-circular lined tunnel with visco-elastic imperfect interface in the saturated poroelastic medium

A semi-analytical method is proposed to investigate the dynamic response of a non-circular tunnel with visco-elastic imperfect interface in poroelastic medium. Biot’s dynamic theory is used to simulate the saturated poroelastic medium, and the governing equations are solved by reducing them into three Helmholtz equations that the potential functions satisfy. The visco-elastic interface model with elastic and viscosity coefficients is adopted to analyze the interface effect around the non-circular lined tunnel. The analytic solutions of displacements and stresses are expanded in terms of wave functions. Some numerical examples are provided to analyze the effect of visco-elastic interface on the dynamic stress around the tunnel.     

地下圆形衬砌隧道对沿线地震动的影响(II):数值结果

利用地下圆形衬砌隧道对入射平面P波和SV波散射级数解答，定量分析了入射波长、入射角度、隧道直径、衬砌刚度等因素对沿线地表位移放大作用的影响。计算结果表明，当入射频率较低时，地下隧道的存在对地表位移幅值影响不大；而当入射频率较高时，地表位移幅值可以达到无隧道情况的4．5倍以上；衬砌情况下地表位移幅值可以高出非衬砌情况的87．8％。建议在地铁的规划设计中考虑地下隧道的建设对隧道沿线设计地震动的影响。     

Response of circular tunnel with imperfect interface bonding in layered ground subjected to obliquely incident plane P or SV wave

A semianalytical procedure is proposed for evaluating the internal forces of circular tunnel with imperfect interface bonding in layered ground subjected to an obliquely incident plane P or SV wave. In this study, the hoop bending moment and hoop axial force are related to the free‐field responses of the ground. A one‐dimensional numerical approach is firstly presented to obtain the free‐field responses of a layered half‐space with an obliquely incident plane P or SV wave propagation. Then, the free‐field stress state is transformed and decomposed in the polar coordinate system. The internal forces of tunnel caused by the isotropic stress state and the pure shear state are calculated and then summed up to obtain the overall analytical solutions. Finally, the validity of the proposed semianalytical procedure is demonstrated by numerical examples.     

平面P波入射下浅埋平行双洞隧道注浆加固减震机制

地震动作用下小净距隧道双洞之间存在动力放大效应,依托某强震区小净距盾构隧道工程,基于傅里叶贝塞尔级数展开法,给出了平面P波垂直入射下地下半空间弹性介质中圆形双洞复合式衬砌洞室动应力解析解,深入研究了洞室间距、隧道全环注浆加固参数对衬砌动应力集中的影响。研究表明：洞室间距对衬砌的动应力有显著影响,随着洞室之间距离减小,左右洞室衬砌动应力明显放大;2.5倍洞径可以作为双洞洞室动力临界净距,当洞室间距小于2.5倍洞径时,应进行抗减震设计;注浆全环加固隧道周边土体,可以明显降低衬砌动应力,随着注浆加固区土体刚度增加,衬砌动应力幅值减小;结合工程实际,建议注浆加固区厚度取0.5倍的洞室半径值,加固区岩体和围岩剪切波速度之比取1.2。     

爆炸地震波作用下盾构隧道动力响应分析

盾构隧道衬砌由于各种类型接头的存在而与整体式衬砌的力学特性存在较大差异。将盾构隧道衬砌结构看作由弹塑性铰链连接的刚性管片组成,考虑围岩介质的黏弹性,提出了爆炸地震波作用下盾构隧道动力分析的简化计算方法。采用该方法对南京地铁盾构段典型横断面进行了动力分析,研究了爆炸地震波入射角度、围岩介质特性及管片厚度对结构受力与变形的影响规律。分析结果表明:波入射角度对盾构隧道有很大影响,斜入射时结构的动力响应要大于垂直入射时结构的动力响应;围岩介质等级越高,围岩对隧道结构的约束越强,隧道的抗爆性能越好;管片厚度的增大会增大结构的内力,合理设置管片厚度有利于提高盾构隧道抗爆性能。     

沉积谷中衬砌隧道对SH波的散射

现实中衬砌隧道穿越沉积谷地十分常见,而国内外对其地震响应规律研究较少。基于MATLAB编程平台,采用间接边界积分方程法,就沉积谷地衬砌隧道对平面SH波的散射问题进行了初步探讨。研究了不同频率、隧道埋深与入射角度对地表位移和衬砌内外壁动应力集中因子的影响,并比较了沉积谷地中隧道与半空间隧道两种情况下的差别。结果表明：软土沉积中隧道衬砌动应力集中更为显著;高频波入射下,隧道埋深对沉积区域内位移分布、衬砌应力频谱特性和地表位移频谱特性均有较大影响。研究结论可为沉积谷地中衬砌隧道抗震设计与安全性评估提供定量依据。     

排桩对柱面SH波散射问题研究：解析求解

采用波函数展开法结合Graf加法定理,利用桩体与土体之间的位移和应力连续边界条件,给出了全空间单排桩对柱面SH波散射解析解,并采用傅里叶逆变换,求得时域结果。该方法考虑了入射波曲率的影响,在频域内分析了柱面SH波入射时排桩散射的频谱规律,给出了时域排桩柱面SH波散射位移云图,讨论了桩数与桩间距对柱面SH波入射时排桩散射的影响。研究表明：在振源距排桩较近（d/a=10）时,低频段（η=0~1.0）排桩对柱面SH波的隔离作用显著;振源距排桩较远时,各频段排桩对柱面SH波的隔离作用均较为显著。桩间距固定时,增加桩数,排桩后方首次出现的最大位移响应相应减小,排桩散射的影响范围随之增大;对柱面SH波进行阻隔时,为提高阻隔效率的同时节约成本,不仅需要考虑桩数,还应考虑波源与桩体、桩间空隙相对位置的影响;排桩分布宽度固定时,由于入射波曲率对排桩散射的影响,减小桩间距,排桩后方首次出现的最大位移响应有可能会出现放大的情况,故应采用合理的桩间距对柱面SH波进行阻隔。     

动力扰动下全长黏结锚杆的力学响应特性

深部岩体工程中,锚杆在围岩变形后处于高承载应力状态,受到爆破振动、矿震等动载荷作用后极易失效,因此,亟待研究动力扰动下锚杆的力学响应机制。基于SHPB试验平台,自行研发了一套研究锚杆动力响应的试验装置,开展动力扰动下全长黏结锚杆的力学响应特性研究。结果表明：初始动载荷作用下锚杆滑移量随着入射能的增加而增加,锚杆中应力波的波峰值随着传播距离的增加而逐渐减小,当应力波传播至锚杆最里端时,应力波峰值衰减较大;第2次动载荷后锚杆SG1处与SG2处应力波峰值差明显比第1次减小,表明动载荷下锚固界面从锚杆外端开始损伤;锚杆失效与锚固界面损伤有关,锚杆承载后初次受到动载荷的影响导致锚固界面产生损伤,损伤锚固段又受到外部载荷（如二次冲击、岩体挤压）作用时会进一步劣化,其不能抵抗围岩的变形而失效。研究结果为揭示锚杆支护失效行为,采取合理的设计与施工提供新的思路。     

移动环形荷载作用下饱和土中圆形衬砌隧洞动力响应研究

基于Biot理论,研究了饱和土中带有衬砌的圆形隧洞在移动环形荷载作用下的动力响应。假定衬砌为弹性体,土体为饱和多孔介质,引入两类势函数来表示土体、孔隙水和衬砌的位移,使隧洞的控制方程解耦。结合边界条件及连续条件,通过傅立叶变换得到频率-波数域中衬砌和土体的应力、位移和孔隙水压力解答,最后用傅立叶积分逆变换得到时-空域中的数值解。计算并比较了3种隧洞模型（弹性土体隧洞、饱和土体隧洞和饱和土衬砌隧洞）的动力响应分析。数值分析结果说明：（1）移动荷载速度对3种隧洞动力响应均具有较大影响;（2）弹性土体隧洞和饱和土体隧洞的动力响应具有明显区别,所以在富水地区的隧洞动力响应中土体应该视为饱和土体;（3）衬砌对隧洞动力响应有较大影响,故隧洞的动力分析中不能忽略衬砌作用。     

Lined Circular Tunnels in Elastic Transversely Anisotropic Rock at Depth

Closed-form solutions for displacements and stresses of both the liner and the rock are presented for a deep circular tunnel excavated in transversely anisotropic rock above or below the water table subjected to static or seismic loading. The solutions are obtained with the assumption of elastic response of rock and liner, tied contact between rock and liner, impermeable liner, plane strain conditions along the tunnel axis and simultaneous excavation, and liner installation. The liner of a tunnel placed below the water table must support, in addition to the rock stresses, the full water pressure, while a tunnel located above the water table must support only the rock pressures. The solutions presented for static loading show, however, that displacements and stresses of the liner and rock are the same when the tunnel is placed above or below the water table as long as the total far-field stresses are the same. With rapid loading, e.g. seismic loading, excess pore pressures may be generated in saturated rock, which induce a different response than that of a tunnel excavated in dry rock. The analyses indicate that stresses and displacements are more uniform when excess pore pressures are produced, which seems to indicate that pore pressure generation tends to reduce non-uniform response in anisotropic rock.     

A complex variable solution for stress and displacement field around a lined circular tunnel at great depth

By applying the series expansion technique in the complex variable method established by Muskhelishvili, the plane elasticity problem for the stress and displacement field around a lined circular tunnel in conjunction with the consideration of misfit and interaction between the liner and the surrounding geomaterial is dealt with. The tunnel is assumed to be driven in a homogeneous and isotropic geomaterial. The coefficients in the Laurent series expansion of the stress functions are determined. The complex potentials in the liner and the surrounding geomaterial are explicitly derived, respectively. As an example, the case of a lined circular tunnel located in an isotropic initial stress field but subjected to uniform internal pressure is numerically considered. Numerical results indicate that the installation of tunnel liner can reduce the influences of the tunnel excavation on the in situ displacement and stress fields. However, the relative thickness and rigidity of the liner should be in an appropriate range. In addition, the effect of the tunnel excavation upon the displacement field is more significant than that upon the stress field. As far as the stress field in the surrounding geomaterial is concerned, when the ratio between the cover depth of tunnel and the tunnel radius is larger than 5, the results for the stress field in the paper are applicable. When the ratio between the tunnel depth and the tunnel radius is larger than 20, the results are applicable for the displacement field. Copyright © 2008 John Wiley & Sons, Ltd.     

饱和半空间瞬态加载衬砌隧道的动力响应研究

工程中,地下衬砌隧道会遇到水压破裂压力、爆炸及突然开挖等瞬态荷载作用,将这些荷载理想化为作用在衬砌内边界上的均布瞬态荷载,研究圆柱形衬砌隧道在突加荷载、阶跃荷载和三角形脉冲荷载作用下的动力响应规律。根据Biot波动理论推导出半空间饱和介质的控制方程;视衬砌结构为弹性材料导出衬砌结构的控制方程。用极大半径凸圆弧近似半空间直边界,采用Graff加法公式进行坐标变换,将直角坐标表示的通解转化为极坐标表示的通解。根据边界条件导出衬砌和土体的位移、应力和孔隙压力的Laplace变换域的解答。利用反Laplace变换数值计算方法,将解答转换为时域解,得出3种瞬态荷载作用下衬砌隧道地面位移峰值、衬砌应力和孔隙压力的分布规律。     

非饱和土中圆柱形衬砌隧道的瞬态动力响应

在以往关于圆柱形衬砌隧道的瞬态动力响应中,衬砌周围土体大多假定为弹性介质或饱和介质。然而,自然界中的土体大多为非饱和介质。考虑土体与衬砌结构的动力相互作用及动荷载引起的附加质量密度的影响,研究了瞬态荷载作用下非饱和土中无限长深埋圆柱形衬砌隧道的动力响应。基于多孔介质混合物理论和连续介质力学理论,建立了非饱和土中圆柱形衬砌隧道受到瞬态荷载作用时衬砌及周围土体的控制方程,利用Durbin数值反演法得到了衬砌及土体在时间域的动力响应。数值分析了饱和度对瞬态荷载下径向位移、径向应力、环向应力和孔隙水压力的影响。结果表明：饱和度对衬砌及周围土体的瞬态响应影响显著;饱和度对径向位移沿径向的衰减影响较小,对环向应力和孔隙压力沿径向的衰减影响较大。     

Characteristic Curves for Deep Circular Tunnels in Poroplastic Rock

A complete analytical solution for an axisymmetric deep tunnel excavated in a saturated poroplastic rock is presented. Results are found for short- and long-term analyses and for different drainage conditions at the rock–liner interface. In the derivation, the following assumptions are made: (1) circular cross-section, (2) deep tunnel, (3) plane strain conditions on a cross-section perpendicular to the tunnel axis, (4) axisymmetric loading, (5) the rock is saturated, homogeneous and isotropic, and (6) the rock is elastic-perfectly plastic with brittle failure and non-associated flow rule. The results obtained indicate that, if the rock remains elastic during construction, the stresses of the liner and the tunnel deformations are the same for short- and long-term conditions and are independent of the drainage conditions at the rock–liner interface and on the magnitude of Biot’s parameter α. If the rock yields, the stresses in the liner and the tunnel deformations strongly depend on the type of analysis. Effective radial and tangential stresses inside the rock decrease with Biot’s parameter α, while radial displacements increase. The response of the liner in terms of stresses and deformations strongly depends on its stiffness relative to the rock, yielding of the rock, groundwater and drainage conditions, and construction operations, while it is somewhat less sensitive to the rock’s poroplastic properties. Stresses and deformations inside the rock, however, show a much stronger dependency.     

Analytical Solutions for the Construction of Deeply Buried Circular Tunnels with Two Liners in Rheological Rock

The construction of underground tunnels is a time-dependent process. The states of stress and strain in the ground vary with time due to the construction process. Stress and strain variations are heavily dependent on the rheological behavior of the hosting rock mass. In this paper, analytical closed-form solutions are developed for the excavation of a circular tunnel supported by the construction of two elastic liners in a viscoelastic surrounding rock under a hydrostatic stress field. In the solutions, the stiffness and installation times of the liners are accounted for. To simulate realistically the process of tunnel excavation, a time-dependent excavation process is considered in the development of the solutions, assuming that the radius of the tunnel grows from zero until its final value according to a time-dependent function to be specified by the designers. The integral equations for the supporting pressures between rock and first liner are derived according to the boundary conditions for linear viscoelastic rocks (unified model). Then, explicit analytical expressions are obtained by considering either the Maxwell or the Boltzmann viscoelastic model for the rheology of the rock mass. Applications of the obtained solutions are illustrated using two examples, where the response in terms of displacements and stresses caused by various combinations of excavation rate, first and second liner installation times, and the rheological properties of the rock is illustrated.     

Stability of openings in jointed rock

The slide line approach is combined with the finite element method to represent the action of a removable block on a lined tunnel. The present paper examines the strength and ductility required of the tunnel liner to resist the forces imposed by a block when the surrounding rock mass is subjected to explosive loading. Key block theory developed by Goodman and Shi provides the conceptual framework for simplifying a general jointed domain to a manageable size for analysis with finite element models.     

P波作用下深埋隧道动应力集中问题参数敏感性分析

采用波函数展开法,推导了无限介质中双层衬砌圆形洞室在P波作用下衍射问题的解析解,并结合南水北调西线1期工程3#引水隧道开展了动应力集中系数参数敏感性分析。计算结果表明,围岩和内层衬砌的弹性模量对结构的动应力集中系数影响较大,而围岩泊松比对计算结果的影响几乎可以忽略不计;围岩和衬砌之间的介质层在一定程度上具有减震作用,前提条件是其弹性模量低于围岩弹性模量的1/20,否则减震效果不明显。     

Mechanical Response of Lined and Unlined Heated Drifts

Summary Approximate relations are developed to determine the steady stresses and displacements that may develop in unlined and lined drifts heated above ambient, as representative of conditions in a nuclear waste repository. For a series of parallel, unlined drifts, radial convergence due solely to thermal effects is everywhere null at early-times; at late times it is a maximum inward at springline, and an equivalent maximum outward at crown and invert. Support pressures and hoop stresses are evaluated for a flexible liner placed in intimate contact with the drift wall, following excavation, where a full slip condition is applied at the drift-liner interface. For rock mass moduli of similar order to, or smaller than, the liner modulus, hoop stresses and support pressures are shown insensitive to rock mass parameters. Surprisingly, liner stresses are strongly controlled by liner modulus, liner Poisson ratio, liner thermal expansion coefficient, and instantaneous liner temperature, and only weakly by rock mass modulus. Response is shown independent of thermal expansion coefficient of the rock mass, and temperature distribution beyond the drift wall. The “misfit” expansion of the liner in the drift cavity controls liner stresses that rise linearly with the temperature of the liner, alone. Importantly, the results demonstrate the potential to control magnitudes of thermal stresses by the incorporation of compressible elements within the liner, or within the blocking or backfill behind the liner. Although the results are partly conditioned by the assumptions of a fully flexible liner and full slip conditions at the drift-liner interface, they serve to define the important parametric dependencies in the mechanical response of heated drifts.