Experimental study of wave–wave nonlinear interactions using the wavelet-based bicoherence

The wavelet-based bicoherence, which is a new and powerful tool in the analysis of nonlinear phase coupling, is used to study the nonlinear wave–wave interactions of breaking and non-breaking gravity waves propagating over a sill. Two cases of mechanically generated random waves based on Jonswap spectra are used for this purpose. Values of relative depth, k_ph (k_p is the wave number of the spectral peak and h is the water depth) for this study range between 0.38 and 1.22. The variations of wavelet-based total bicoherence for the test cases indicate that the degree of quadratic phase coupling increases in the shoaling region consistent with a wave profile that is pitched shoreward, relative to a vertical axis as seen in the experiments, but decreases in the de-shoaling region. For the non-breaking case, the degree of quadratic phase coupling continues to increase until waves reach the top of the sill. Breaking waves, however, achieve their highest level of quadratic phase coupling immediately before incipient breaking and the degree of phase coupling decreases sharply following breaking. In addition the wavelet-based bicoherence spectra provide evidence of the harmonics' growth which is reflected in the energy spectra. The bicoherence spectra also show that quadratic phase coupling between modes within the peak frequency as well as between modes of the peak frequency and its higher harmonics are dominant in the shoaling region, even though there are relatively high levels of quadratic phase coupling occurring between other frequencies. Furthermore, using the temporal resolution property of the wavelet-based bicoherence, we find that the quadratic wave interactions occur more readily during segments of time with large change of wave amplitude, rather than those segments having large wave amplitudes, but small gradients in amplitude.     

畸形波（freak wave）

在分析国外研究成果的基础上,简单介绍了"畸形波"的几个基本问题,如"畸形波"的定义、发生的海域、发生的机理等。     

Bispectrum and asymmetry of wave shape

Ｂｉｓｐｅｃｔｒｕｍａｎｄａｓｙｍｍｅｔｒｙｏｆｗａｖｅｓｈａｐｅ￥ＤｉｎｇＰｉｎｇｘｉｎｇ；ＫｏｎｇＹａｚｈｅｎ；ａｎｄＳｕｎＦｕ（ＳｔａｔｅＫｅｙＬａｂｏｒａｔｏｒｙＯｆＥｓｔｕａｒｉｎｅａｎｄ￣ａｌＲ￣ｈ，ＩｎｓｔｉｔｕｔｅｏｆＥＳｔｕａｒｉｎ...     

Optimum fifth order Stokes wave theory

ＯｐｔｉｍｕｍｆｉｆｔｈｏｒｄｅｒＳｔｏｋｅｓｗａｖｅｔｈｅｏｒｙ￥ＦｕＹｕｈｕａ（ＣｈｉｎａＯｆｆｓｈｏｒｅＯｉｌＤｅｖｅｌｏｐｍｅｎｔ＆ＥｎｇｉｎｅｅｒｉｎｇＣｏｒｐｏｒａｔｉｏｎ，Ｐ．Ｏ．Ｂｏｘ４７０９，Ｂｅｉｊｉｎｇ１０００２７，Ｃｈｉｎａ）...     

The irregular wave force on pier group

In this paper, the irregular wave force on a cylindrical pier group is calculated by the method of spectrum analysis, and the coefficients of the group effect of piers in the pier group are given here. The calculated results, using P-M and Bretshneider's. (B's) spectra, are obtained for the cases of 2 piers, 3 piers and 4 piers. To compare these results with those obtained for regular waves, we can come to some significant conclusions. Under the action of the irregular wave, when the distance between the piers in the pier group increases, the coefficient of the group effect decreases and tends rapidly to the case of a single pier. In general, when the ratio of the distance between the piers to the diameter of the pier is greater than 4, the group effect can be neglected.     

Improved form of wind wave frequency spectrum

The lower frequency part of the theoretical wind wave spectrum proposed by the authors (Wen et al. , 1988a, b,c) has been improved and the form of spectrum is appreciably simplified. In addition to the field data collected in the Bohai Sea region and used in the previous papers, those obtained in the Huanghai Sea, the East China Sea and the South China Sea have been employed so that the improved spectra can be verified on a more extensive observational basis. Computed results agree with the observations well. Further comparisons have been made between the proposed spectra and the JONSWAP spectrum. Though the two types of spectrum are close to each other in form, the former shows, as a whole, better agreement with the observation than the latter. By introducing an improved relation between the peak-ness factor and significant wave steepness, the spectrum contains only significant wave height and period as parameters. For spectra given in this form, the computed peak frequencies coincide approximately wit     

A hybrid model for numerical wave forecasting and its implementation——Ⅰ. The wind wave model

The authors make an endeavor to explain why a new hybrid wave model is here proposed when several such models have already been in operation and the so- called third generation wave modej is proving attractive. This part of the paper is devoted to the wind wave model. Both deep and shallow water models have been developed, the former being actually a special case of the latter when water depth is great. The deep water model is exceptionally simple in form. Significant wave height is the only prognostic variable. In comparison with the usual methods to compute the energy input and dissipations empirically or by "tuning", the proposed model has the merit that the effects of all source terms are combined into one term which is computed through empirical growth relations for significant waves, these relations being, relatively speaking, easier and more reliable to obtain than those for the source terms in the spectral energy balance equation. The discrete part of the model and the implementation of the mode     

The difference between the joint probability distributions of apparent wave heights and periods and individual wave heights and periods

The joint distribution of wave heights and periods of individual waves is usually approximated by the joint distribution of apparent wave heights and periods. However there is difference between them. This difference is addressed and the theoretical joint distributions of apparent wave heights and periods due to Longuet-Higgins and Sun are modified to give more reasonable representations of the joint distribution of wave heights and periods of individual waves. The modification has overcome an inherent drawback of these joint PDFs that the mean wave period is infinite. A comparison is made between the modified formulae and the field data of Goda, which shows that the new formulae consist with the measurement better than their original counterparts.     

Hindcasting wave spectra in finite‐depth waters

A model is described for hindcasting or forecasting waves in finite‐depth waters. The model is particularly applicable to coastal sites where the water is depth‐limited. The wave energy density spectrum is modelled in the frequency‐directional domain. For each spectral component a ray is defined along which wave energy propagates to reach the site. For sites exposed to the open ocean a background spectral wave model is required to provide input to the ray endpoints. Further growth and dissipation is then effected along the rays according to the local wind and water depth. The model was used to hindcast wave spectra over a period of 9 months for a site in the Canterbury Bight, New Zealand. The results were compared with measurements from a Waveridcr buoy at the site. The model succeeds in explaining about 40% of the variance in measured significant wave heights. However, the present application is handicapped by errors inherent in the background spectral model and in specifying the local wind.     

The equilibrium range of wind wave frequency spectrum

-Theoretical form of equilibrium range is given on the basis of the wind wave frequency spectra proposed by Wenel al. (1988a,b,c, 1989a,b). The effects of peakness factor and water depth are discussed. In the case of deep water the e-quilibrium range is reduced to the form first proposed by Toba (1973) and the coefficient of the formula is shown to be the function of nondimensional fetch or peak frequency. Results of the present paper have been verified through field data.     

The application of wave refraction-diffraction model with friction

In this paper a refraction-diffraction model with friction is used to compute wave characteristics in a region near a certain port. Comparing with the results from refraction model, and with the data observed during a typhoon in 1985, it is found that the characteristics from the refraction-diffraction model with friction are reasonable, and that the results are in rather good agreement with observations. Thus it can be concluded that the model is effective for computing coastal wave characteristics over complicated bottom topography.     

Theoretical wind wave frequency spectra in shallow water

The method developed by Wen et al. (1988 a) for deriving theoretical wind wave frequency spectrum in deep water is extended to the case of water of finite depth, in which a parameter η=H/d is introduced, where H and d represent the average wave height and water depth respectively. The derived spectra reduce to those in deep water when η=0. The case of η=1/2 corresponds to waves impending to break because of the effect of the bottom. Simplified forms of spectra are given. The theoretical results agree with the observed spectra well.     

Probabilistic analysis for wave‐induced submarine landslides

Abstract

When waves propagate over the ocean floor, they induce a change of hydrodynamic pressure, positive under the crest and negative under the trough. These pressure changes may cause shear failure in soft sediments and lead to submarine landslides. This paper presents a general analytical procedure for evaluating the probability of wave‐induced failure in offshore clay sediments. Both the wave and the un‐drained shear strength of clay sediments are considered random. Numerical results of some analyses are also presented.     

The wave transformation and breaking phenomena in shallow water

Ｔｈｅｗａｖｅｔｒａｎｓｆｏｒｍａｔｉｏｎａｎｄｂｒｅａｋｉｎｇｐｈｅｎｏｍｅｎａｉｎｓｈａｌｌｏｗｗａｔｅｒ￥ＬｉＹｕｃｈｅｎｇ（１．ＤａｌｉａｎＵｎｉｖｅｒｓｉｔｙｏｆＴｅｃｈｎｏｌｏｇｙ，Ｄａｌｉａｎ１１６０２３，Ｃｈｉｎａ）Ａｂｓｔｒａｃｔ：...     

Representation of double-peaked sea wave spectra in Jiaozhou Bay

The spectrum shape characteristics of double-peaked sea wave spectia actually measured in the Jiaozhou Bay were analysed and one representation of double-peaked sea wave spectra with six-parameters which can be determined from a given sea wave spectrum is proposed in this paper. After verifying by fitting process with the data sets of double-peaked sea wave spectra measured in the Jiaozhou Bay, it can be seen from the results that the representation mentioned above may be used to express the double-peaked sea wave spectra generated in the Jiaozhou Bay under various sea states, and that the absolute values of maximum deviation index (D.I.) do not exceed 30. 0.     

Boussinesq–Green–Naghdi rotational water wave theory

Using Boussinesq scaling for water waves while imposing no constraints on rotationality, we derive and test model equations for nonlinear water wave transformation over varying depth. These use polynomial basis functions to create velocity profiles which are inserted into the basic equations of motion keeping terms up to the desired Boussinesq scaling order, and solved in a weighted residual sense. The models show rapid convergence to exact solutions for linear dispersion, shoaling, and orbital velocities; however, properties may be substantially improved for a given order of approximation using asymptotic rearrangements. This improvement is accomplished using the large numbers of degrees of freedom inherent in the definitions of the polynomial basis functions either to match additional terms in a Taylor series, or to minimize errors over a range. Explicit coefficients are given at O(μ²) and O(μ⁴), while more generalized basis functions are given at higher order. Nonlinear performance is somewhat more limited as, for reasons of complexity, we only provide explicitly lower order nonlinear terms. Still, second order harmonics may remain good to kh ≈ 10 for O(μ⁴) equations. Numerical tests for wave transformation over a shoal show good agreement with experiments. Future work will harness the full rotational performance of these systems by incorporating turbulent and viscous stresses into the equations, making them into surf zone models.     

Study on the adsorptive complex wave of tin in seawater

A trace of tin exists in seawater, and is also probably in combination with organic materials or microbes. Therefore, it was reported that methods for determining tin in seawater need to use a separation or preconcentration stage in analysis. This paper provides an oscillopolarographic method for determining directly tin in seawater by irradiating it with ultraviolet rays. In a seawater system with 0.0035％ cupferron (Hcup), 0.0038％ Tween-80, 0.318 mol/1:0.375mol/1 NH_3 H_2O:HAc as a basic solution, there occurs a sensitive derivative     

Maximum entropy principle and statistical distribution of ocean wave heights

Ｍａｘｉｍｕｍｅｎｔｒｏｐｙｐｒｉｎｃｉｐｌｅａｎｄｓｔａｔｉｓｔｉｃａｌｄｉｓｔｒｉｂｕｔｉｏｎｏｆｏｃｅａｎｗａｖｅｈｅｉｇｈｔｓ￥ＷｕＫｅｊｉａｎａｎｄＳｕｎＦｕ（ＲｅｃｅｉｖｅｄＭａｙ１５，１９９５；ａｃｃｅｐｔｅｄＪｕｎｅ２１，１９９５）Ａ...     

Numerical simulation of solitary wave propagation based on MPS method

The concept of candidate particle set is introduced in the MPS gridless numerical method to generate neighboring particle set matrix, which can reduce the CPU time to 1/11 of that before introduction. The Bi-CGSTAB (bi-conjugate gradient stabilized) algorithm is applied to solving the Poisson pressure equation, by which the solving speed is significantly accelerated. The process of solitary waves propagating over a numerical flume and interacting with a vertical wall is simulated. The simulated results of water surface elevation are in good agreement with the analytical solution as well as the measured data. The predicted maximum values of the run-up of solitary waves with various relative incident wave heights agree well with the measured results.     

Quadtree grid numerical model of nearshore wave–current interaction

This paper describes an adaptive quadtree-based 2DH wave–current interaction model for evaluating nearly horizontal wave-induced currents in the surf-zone. The model accounts for wave breaking, shoaling, refraction, diffraction, wave–current interaction, set-up and set-down, mixing processes (turbulent diffusion), bottom frictional effects, and movement of the land–water interface at the shoreline. The wave period- and depth-averaged governing equations, which conserve mass, momentum, energy and wave action, are discretised explicitly by means of an Adams–Bashforth second-order finite difference technique on adaptive hierarchical staggered quadtree grids. Grid adaptation is achieved through seeding points distributed according to flow criteria (e.g. local current gradients). The model is verified for nearshore circulation at a sinusoidal beach and nearshore currents at a multi-cusped beach. Reasonable agreement is obtained with experimental data from da Silva Lima [da Silva Lima, S.S.L., 1981. Wave-induced Nearshore Currents. PhD Thesis, Department of Civil Engineering, University of Liverpool] and Borthwick et al. [Borthwick, A.G.L., Foote, Y.L.M., Ridehalgh, A., 1997. Nearshore measurements at a cusped beach in the UK Coastal Research Facility, Coastal Dynamics '97, Plymouth, 953–962]. The modelling approach presented herein should be useful in simulating nearshore processes in complicated natural coastal domains. Of particular value is the local grid enrichment capability, which permits refined modelling of important localised flow behaviour such as rip currents and surf-zone circulation systems.