Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

Sharp-based, tide-dominated deltas of the Sego Sandstone, Book Cliffs, Utah, USA

The lower part of the Cretaceous Sego Sandstone Member of the Mancos Shale in east‐central Utah contains three 10‐ to 20‐m thick layers of tide‐deposited sandstone arranged in a forward‐ and then backward‐stepping stacking pattern. Each layer of tidal sandstone formed during an episode of shoreline regression and transgression, and offshore wave‐influenced marine deposits separating these layers formed after subsequent shoreline transgression and marine ravinement. Detailed facies architecture studies of these deposits suggest sandstone layers formed on broad tide‐influenced river deltas during a time of fluctuating relative sea‐level. Shale‐dominated offshore marine deposits gradually shoal and become more sandstone‐rich upward to the base of a tidal sandstone layer. The tidal sandstones have sharp erosional bases that formed as falling relative sea‐level allowed tides to scour offshore marine deposits. The tidal sandstones were deposited as ebb migrating tidal bars aggraded on delta fronts. Most delta top deposits were stripped during transgression. Where the distal edge of a deltaic sandstone is exposed, a sharp‐based stack of tidal bar deposits successively fines upward recording a landward shift in deposition after maximum lowstand. Where more proximal parts of a deltaic‐sandstone are exposed, a sharp‐based upward‐coarsening succession of late highstand tidal bar deposits is locally cut by fluvial valleys, or tide‐eroded estuaries, formed during relative sea‐level lowstand or early stages of a subsequent transgression. Estuary fills are highly variable, reflecting local depositional processes and variable rates of sediment supply along the coastline. Lateral juxtaposition of regressive deltaic deposits and incised transgressive estuarine fills produced marked facies changes in sandstone layers along strike. Estuarine fills cut into the forward‐stepped deltaic sandstone tend to be more deeply incised and richer in sandstone than those cut into the backward‐stepped deltaic sandstone. Tidal currents strongly influenced deposition during both forced regression and subsequent transgression of shorelines. This contrasts with sandstones in similar basinal settings elsewhere, which have been interpreted as tidally influenced only in transgressive parts of depositional successions.     

Regional distribution of Al,B, Ba,Ca, K,La, Mg,Mn, Na,P, Rb,Si, Sr,Th, U and Y in terrestrial moss within a 188,000 km2 area of the central Barents region: influence of geology,seaspray and human activity

Five hundred and ninety-eight samples of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) collected from a 188,000 km² area of the central Barents region (NE Norway, N Finland, NW Russia) were analysed by ICP-AES and ICP-MS. Analytical results for Al, B, Ba, Ca, K, La, Mg, Mn, Na, P, Rb, Si, Sr, Th, U and Y concentrations are reported here. Graphical methods of data analysis, such as geochemical maps, cumulative frequency diagrams, boxplots and scatterplots, are used to interpret the origin of the patterns for these elements. None of the elements reported here are emitted in significant amounts from the smelting industry on the Kola Peninsula. Despite the conventional view that moss chemistry reflects atmospheric element input, the nature of the underlying mineral substrate (regolith or bedrock) is found to have a considerable influence on moss composition for several elements. This influence of the chemistry of the mineral substrate can take place in a variety of ways. (1) It can be completely natural, reflecting the ability of higher plants to take up elements from deep soil horizons and shed them with litterfall onto the surface. (2) It can result from naturally increased soil dust input where vegetation is scarce due to harsh climatic conditions for instance. Alternatively, substrate influence can be enhanced by human activity, such as open-cast mining, creation of ‘technogenic deserts’, or handling, transport and storage of ore and ore products, all of which magnify the natural elemental flux from bedrock to ground vegetation. Seaspray is another natural process affecting moss composition in the area (Mg, Na), and this is most visible in the Norwegian part of the study area. Presence or absence of some plant species, e.g., lichens, seems to influence moss chemistry. This is shown by the low concentrations of B or K in moss on the Finnish and Norwegian side of the (fenced) border with Russia, contrasting with high concentrations on the other side (intensive reindeer husbandry west of the border has selectively depleted the lichen population).     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

深部矿井水煤共采水文地质数值分析

针对兖州煤田下组煤深部开采受奥灰高承压水威胁以及当地大型煤化工企业生产用水量大的现状,在已进行的水文地质勘探及放水试验基础上,评价奥灰富水性,并采用有限差分法进行奥灰疏水降压数值模拟研究,提出水煤共采观点。研究结果表明:兖州煤田深部奥灰水压高,合理布置水煤共采孔,可以实现奥灰水位的有效疏降,疏降中心区水位最大降深可达110 m,突水系数显著下降,提高了下组煤开采的安全性;同时可提供煤化工43200 m3/d的供水量,能达到可持续的、水资源保护性的供水效果,实现下组煤的水煤共采。     

Mineralogy, Chemistry, and Genesis of the Boninite Series Volcanics, Chichijima, Bonin Islands, Japan

The Bonin archipelago represents an uplifted fore-arc terrainwhich exposes the products of Eocene supra-subduction zone magmatism.Chichijima, at the centre of the chain, represents the typelocality for the high-Mg andesitic lava termed boninite. Therange of extrusives which constitute the boninite series volcanicsare present on Chichijima, and are disposed in the sequenceboninite-andesite-dacite with increasing height in the volcano-stratigraphy.Progression to evolved compositions within the Chichijima boniniteseries is controlled by crystal fractionation from a boniniteparental magma containing 15% MgO. Olivine and clinoenstatiteare the initial liquidus phases, but extraction of enstatiticorthopyroxene, followed by clinopyroxene and plagioclase, isresponsible for the general evolution from boninite, throughandesite, to dacite. Some andesites within the overlying MikazukiyamaFormation are petrographically distinct from the main boniniteseries in containing magnetite phenocrysts and a high proportionof plagioclase. As such, these andesites have affinities withthe calc-alkaline series. Major and trace element data for 74 boninitic series rocks fromChichijima are presented. Although major element variation isdominantly controlled by high-level crystal fractionation, thelarge variations in incompatiable trace element concentrationsat high MgO compositions cannot be explained by this mechanism.Nd, Pb, and Sr isotopic data indicate the following: (1) a strongoverprint on ⁸⁷Sr/⁸⁶Sr by seawater alteration; (2) Pb isotopeslie above the northern hemisphere reference line (NHRL) andare thus similar to the <30-Ma are and basin lavas of theIzu—Bonin system, and (3) _Nd(40 Ma) ranges between 2.8and 6.8 within the boninite series volcanics. Differences inrare-earth elements (REE), Zr, Ti, and ¹⁴³Nd/¹⁴⁴Nd at similardegrees of fractionation can be explained by the addition ofa component of fixed composition from the down-going oceaniccrustal slab to a variably depleted source region within theoverlying wedge. Data presented for Sm/Zr and Ti/Zr indicatethat boninite series volcanics are characterized by low valuesfor both of these ratios. In particular, boninites appear tohave uniquely low Sm/Zr ratios. These characteristics may bethe result of slab melting in the presence of residual amphibole;the resultant melt could combine with typical slab dehydrationfluids and infiltrate the overlying mantle wedge. Such a fluid—meltcomponent could mix either with shallow mantle or directly withprimitive melts from depleted mantle. Trace elements, REE, andisotope data thus point to a model for boninite genesis whichrequires tightly constrained pressure—temperature conditionsin the slab combined with melting of a variably depleted sourcein the overlying wedge. Such constraints are rarely met exceptduring the subduction of juvenile oceanic crust beneath a young,hot overriding plate.     

Military geology of Antietam battlefield, Maryland, USA—geology, terrain, and casualties

The geology of a battlefield, or that which underlies the area in which a military campaign occurs, rarely truly affects the outcome of battle. Confederate General Robert E. Lee's Maryland campaign and the Battle of Antietam fought against Union General George B. McClellan in 1862 during the American Civil War, are however, major exceptions to this rule. Lee used the geology and structure of the area in choosing the invasion route, in a major delaying tactic prior to the battle, and in the battle itself. In this article, we show the affects of geology on the battle by using standard morphometric measures to quantify terrain variables and relate these data to the numbers of killed and wounded during the battle. We also include a field guide to various locations on the battlefield where the relations between geology, terrain, and casualties can easily be seen.     

Chemical speciation of Cd,Cu, Pb,and Zn in mixed freshwater,seawater, and brine solutions

A theoretical model was developed to study the chemical speciation of the trace elements Zn, Cd, Cu and Pb aqueous solutions and their responses to variations in ionic strength and complexation. Two mixing solutions were investigated, a freshwater-seawater system and a freshwater-brine system. The brine was a calcium, sodium-chloride solution with a molal ionic strength of two. Trace element associations with the ligands OH^?, Cl^?, CO^2?₃, SO^2?₄, and HCO^?₃ were considered at pHs from 3.5 to 11.0 at 25°C. In general, the relative importance of the various ligand-trace element complexes can be predicted from a comparison of their stability constants. However, the effect of pH on the importance of a given complex is not readily apparent from the stability constants. Freshwater-seawater mixtures, as might be found in a totally mixed estuary, show that seawater composition is the dominant control on chemical complexing. Chloride complexing is similar for lead and zinc in the freshwater-brine mixtures. This similarity may account in part for the association of lead and zinc in strata-bound ore deposits.     

Alkaline rocks of Samchampi-Samteran, District Karbi-Anglong, Assam, India

The Samchampi-Samteran alkaline igneous complex (SAC) is a near circular, plug-like body approximately 12 km² area and is emplaced into the Precambrian gneissic terrain of the Karbi Anglong district of Assam. The host rocks, which are exposed in immediate vicinity of the intrusion, comprise granite gneiss, migmatite, granodiorite, amphibolite, pegmatite and quartz veins. The SAC is composed of a wide variety of lithologies identified as syenitic fenite, magnetite ± perovskite ± apatite rock, alkali pyroxenite, ijolite-melteigite, carbonatite, nepheline syenite with leucocratic and mesocratic variants, phonolite, volcanic tuff, phosphatic rock and chert breccia. The magnetite ± perovskite ± apatite rock was generated as a cumulus phase owing to the partitioning of Ti, Fe at a shallow level magma chamber (not evolved DI = O1). The highly alkaline hydrous fluid activity indicated by the presence of strongly alkalic minerals in carbonatites and associated alkaline rocks suggests that the composition of original melt was more alkalic than those now found and represent a silica undersaturated ultramafic rock of carbonated olivine-poor nephelinite which splits with falling temperature into two immiscible fractions—one ultimately crystallises as alkali pyroxenite/ijolite and the other as carbonatite. The spatial distribution of varied lithotypes of SAC and their genetic relationships suggests that the silicate and carbonate melts, produced through liquid immiscibility, during ascent generated into an array of lithotypes and also reaction with the country rocks by alkali emanations produced fenitic aureoles (nephelinisation process). Isotopic studies (δ¹⁸O and δ¹³C) on carbonatites of Samchampi have indicated that the δ¹³C of the source magma is related to contamination from recycled carbon.     

Structural evolution of a salt-cored,domed, reactivated fault complex,Jebel Madar,Oman

Fault and fracture patterns associated with domal structures are observed around the world both at outcrop and in the subsurface. However, the structural evolution of domes and the influence of previous fault and fracture sets are not yet fully understood. This study provides the first structural evolution analysis of Jebel Madar, a domal outcrop in the Adam Foothills of Northern Oman, and evaluates the role of multiple local tectonic events and the associated salt diapirism on fracture and fault distribution pattern development of a salt-cored domal outcrop.Analyses at Jebel Madar suggest that three local tectonic events with different stress regimes that are tentatively linked to three regional tectonic events resulted in a salt-cored, domed, reactivated fault complex: 1) initial dome-formation and NE–SW oriented mode 1 opening fractures and subsequent grabens; 2) E–W oriented dextral strike-slip faulting; and 3) reactivation and inversion of faults, and final dome formation. Salt emplacement is associated with the first and last tectonic events.This integrated study highlights the complicated evolution of fault and fracture distribution patterns at a salt-cored dome. Caution is therefore required in interpretation of similar structural patterns on top of and around salt-cored domes.     

Multicomponent diffusion of a suite of tracers (HTO, Cl, Br, I, Na, Sr, Cs) in a single sample of Opalinus Clay

Diffusion experiments with HTO, ³⁶Cl⁻, Br⁻, I⁻, ²²Na⁺, ⁸⁵Sr²⁺ and ¹³⁴Cs⁺ at trace concentrations in a single sample of Opalinus Clay are modeled with PHREEQC’s multicomponent diffusion module. The model is used first in a classical approach to derive accessible porosities, geometrical factors (the ratio of pore tortuosity and constrictivity) and sorption behavior of the individual tracers assuming that the clay is homogeneous. The accessible porosity for neutral species and cations is obtained from HTO, the anion exclusion volume from ³⁶Cl⁻ and Br⁻, and the cation exchange capacity from ²²Na⁺. The homogeneous model works well for tritium, the anions and ²²Na⁺. However, the ⁸⁵Sr²⁺ and ¹³⁴Cs⁺ experiments show an early arrival of the tracer and a front-form that suggest a dual porosity structure. A model with 10% dead-end pores, containing 19% of the total exchange capacity, can satisfactorily calculate all the experimental data. The Cs⁺ diffusion model builds on a 3-site exchange model, constructed from batch sorption data. The excellent agreement of modeled and measured data contradicts earlier reports that the exchange capacity for Cs⁺ would be smaller in diffusion than in batch experiments.The geometrical factors for the anions are 1.5 times larger than for HTO, and for the cations 2-4 times smaller than for HTO. The different behavior is explained by a tripartite division of the porespace in free porewater, diffuse double layer (DDL) water, and interlayer water in montmorillonite. Differences between estimated and observed geometrical factors for cations are attributed to increased ion-pairing of the divalent cations in DDL water as a result of the low relative dielectric permittivity. Interlayer and/or surface diffusion contributes significantly to the diffusive flux of Cs⁺ but is negligible for the other solutes. The geometrical factors for anions are higher than estimated, because pore constrictions with overlapping double layers force the anions to take longer routes than HTO and the cations. Small differences among the anions can also be attributed to different ion-pairing in DDL water.     

Geology,Alteration, and Mineralization of the Kay Tanda Epithermal Gold Deposit,Lobo, Batangas,Philippines

The Kay Tanda epithermal Au deposit in Lobo, Batangas is one of the Au deposits situated in the Batangas Mineral District in southern Luzon, Philippines. This study aims to document the geological, alteration, and mineralization characteristics and to determine the age of the mineralization, the mechanism of ore deposition, and the hydrothermal fluid characteristics of the Kay Tanda deposit. The geology of Kay Tanda consists of (i) the Talahib Volcanic Sequence, a Middle Miocene dacitic to andesitic volcaniclastic sequence that served as the host rock of the mineralization; (ii) the Balibago Diorite Complex, a cogenetic intrusive complex intruding the Talahib Volcanic Sequence; (iii) the Calatagan Formation, a Late Miocene to Early Pliocene volcanosedimentary formation unconformably overlying the Talahib Volcanic Sequence; (iv) the Dacite Porphyry Intrusives, which intruded the older lithological units; and (v) the Balibago Andesite, a Pliocene postmineralization volcaniclastic unit. K‐Ar dating on illite collected from the alteration haloes around quartz veins demonstrated that the age of mineralization is around 5.9 ± 0.2 to 5.5 ± 0.2 Ma (Late Miocene). Two main styles of mineralization are identified in Kay Tanda. The first style is an early‐stage extensive epithermal mineralization characterized by stratabound Au‐Ag‐bearing quartz stockworks hosted at the shallower levels of the Talahib Volcanic Sequence. The second style is a late‐stage base metal (Zn, Pb, and Cu) epithermal mineralization with local bonanza‐grade Au mineralization hosted in veins and hydrothermal breccias that are intersected at deeper levels of the Talahib Volcanic Sequence and at the shallower levels of the Balibago Intrusive Complex. Paragenetic studies on the mineralization in Kay Tanda defined six stages of mineralization; the first two belong to the first mineralization style, while the last four belong to the second mineralization style. Stage 1 is composed of quartz ± pyrophyllite ± dickite/kaolinite ± diaspore alteration, which is cut by quartz veins. Stage 2 is composed of Au‐Ag‐bearing quartz stockworks associated with pervasive illite ± quartz ± smectite ± kaolinite alteration. Stage 3 is composed of carbonate veins with minor base metal sulfides. Stage 4 is composed of quartz ± adularia ± calcite veins and hydrothermal breccias, hosting the main base metal and bonanza‐grade Au mineralization, and is associated with chlorite‐illite‐quartz alteration. Stage 5 is composed of epidote‐carbonate veins associated with epidote‐calcite‐chlorite alteration. Stage 6 is composed of anhydrite‐gypsum veins with minor base metal mineralization. The alteration assemblage of the deposit evolved from an acidic mineral assemblage caused by the condensation of magmatic volatiles from the Balibago Intrusive Complex into the groundwater to a slightly acidic mineral assemblage caused by the interaction of the host rocks and the circulating hydrothermal waters being heated up by the Dacite Porphyry Intrusives to a near‐neutral pH toward the later parts of the mineralization. Fluid inclusion microthermometry indicates that the temperature of the system started to increase during Stage 1 (T = 220–250°C) and remained at high temperatures (T = 250–290°C) toward Stage 6 due to the continuous intrusion of Dacite Porphyry Intrusives at depth. Salinity slightly decreased toward the later stages due to the contribution of more meteoric waters into the hydrothermal system. Boiling is considered the main mechanism of ore deposition based on the occurrence of rhombic adularia, the heterogeneous trapping of fluid inclusions of variable liquid–vapor ratios, the distribution of homogenization temperatures, and the gas ratios obtained from the quantitative fluid inclusion gas analysis of quartz. Ore mineral assemblage and sulfur fugacity determined from the FeS content of sphalerite at temperatures estimated by fluid inclusion microthermometry indicate that the base metal mineralization at Kay Tanda evolved from a high sulfidation to an intermediate sulfidation condition.     

Co,Hf, Ce,Cr, Th,and REE Charateristics of Modern Bottom Sediments of the Barents Sea

Doklady Earth Sciences - The Co, Hf, Ce, Cr, Th, and REE characteristics are analyzed for modern sediments collected by a bottom grab during the 67th and 68th cruises of R/V Akademik Mstislav...     

Tectonometamorphic Evolution of Jutulsessen,Gjelsvikfjella, cDML,East Antarctica

The Jutulsessen area, can provide a vital clue to the supercontinent assembly of Gondwana Land as it is situated within the Circum East Antarctic Mobile Belt just east of the Penksockett rift marking the divide between the central Dronning Maud Land from the Western Dronning Maud Land. This landmass is dominated by migmatitic quartzo-feldspathic rocks intruded by syn to post-tectonic granites. The work highlights the data from western part cDML area with a view to arrive at a more comprehensive model for the cDML and subsequently to the super continent assembly. Granitic and migmatitic gneisses comprising of amphibolitic and biotite rich enclaves. The gneisses show variations from quartzo-felspathic gneiss to amphibolitic gneiss. The area has witnessed complex geological history involving at different deformational episodes with concomitant metamorphism. The pervasive dominant foliation trends NW-SE with shallow to medium dips towards SW. In the Stabben area, a nonfoliated intrusive syenite-gabbro pluton limits the gneissic exposures. Compositionally, the orthogneisses plot in the monzogranitegranodiorite field where as the mafic dykes/enclaves plot in the basalt-andesite-rhyodacite field. The bulk geochemical characteristics suggest significant crustal contamination. Garnet-biotite Fe-Mg exchange thermometry gives peak metamorphic temperature of 483° C for the gneisses and 628° C for the dioritic enclave within gneisses. A peak metamorphic grade of upper amphibolite to granulite facies is deduced from the mineral assemblages. Widespread anatexis has led to extensive occurrence of migmatites in the area. Recent geochronological studies assign an age of 1170 Ma to 970 Ma for the migmatites/gneisses and an emplacement age of 501 Ma for the Stabben gabbro and syenite. The discriminant plots of the Jutulsessen rocks indicate diverse origin ranging from pre-plate collision to post-collision orogenic tectonic setting. The mafic enclaves/dykes show ocean island arc to MORB affinities. Voluminous addition of juvenile crust during the Pan-African orogeny strongly overprints earlier structures.     

Organization of oscillatory zoning in zircon: analysis, scaling, geochemistry, and model of a zircon from Kipawa, Quebec, Canada

The character of oscillatory zoning within a zircon crystal from the syenite Kipawa Complex, Quebec, varies with scale of observation. Analysis of an scanning electron microscopy (SEM) back-scatter gray-scale traverse at a resolution of one pixel = 2.43 μm revealed 145 zones over 5130 μm, whereas a detailed high-resolution (one pixel = 0.195 μm) section near the crystal rim revealed 225 zones over 795 μm. In order to mathematically characterize the zoning pattern, wavelet, Fourier, and nonlinear analysis techniques were used on profiles of the SEM gray-scale data, and a series constructed was from the zone widths. Results demonstrate that the zircon oscillatory zoning preserves nonlinear and periodic components. Secondary ion mass spectrometry, electron microprobe, and SEM analyses of trace elements show the SEM back-scatter bright zones are enriched in U, Th, and rare earth elements (REE) in comparison to the darker zones. REE patterns are sharply heavy REE enriched and have negative Eu anomalies and prominent positive Ce anomalies. We model the oscillatory zoning, including a measure of its chemical variation, by use of a periodically forced nonlinear system. Results of this data-driven model are quantitatively similar to the natural data. We envisage that the small-scale oscillatory zoning was the result of a nonlinear feedback process wherein the crystal growth modified the adjacent melt, which in turn affected the crystal composition. The large-scale harmonic zones likely reflect changes in the bulk geochemistry of the system from which the zircon grew.     

山东灵山岛滑塌体内部沉积及构造特征研究

青岛市灵山岛修船厂剖面下白垩统地层中发育良好的滑塌变形体。野外观察可见滑塌体岩性单元主要由厚层砂岩及砂页岩互层组成,其中厚层砂岩根据其沉积构造及成因机制可分为砂质碎屑流沉积及浊流沉积两类;砂页岩互层段砂岩层可见底模构造及粒序层理,为静水环境下远端浊流沉积。滑塌体内部构造主要可分为软褶皱变形、同生断层、透镜状砂质团块三种类型。其中,软褶皱变形根据岩性可分为砂岩软褶皱、砂页岩互层软褶皱及页岩软褶皱,随着变形强度增加,软褶皱枢纽逐渐平行于滑移方向,形成曲脊软褶皱或软鞘褶皱(soft sheath folds);同生断层出现在砂岩层中,根据力学性质分为正断层及逆断层,正断层为剪切拉伸所致,逆断层为软褶皱逆冲所致;透镜状砂质团块包括同沉积布丁构造和同沉积断块。根据滑塌体内部滑移面识别出三期滑塌,完整的滑塌体由底部拆离滑移面、下部厚层砂体、中部砂页岩互层及上部砂页岩互层未变形体组成,其组成特征及各部分接触关系反映了滑塌体中下部沿底部拆离滑移面发生滑塌变形,且于活动末期在相对静水条件下被上部砂页岩互层覆盖这一形成过程。根据滑塌体内部组成特征的有序性、相似性及滑塌体内部沉积构造特征,推测其触发机制可能为沉积物快速沉积所引发的重力滑塌成因。     

Delivery of Trace Metals (Al,Fe, Mn,V, Co,Ni, Cu,Cd, Ag,Pb) from the Trinity River Watershed Towards the Ocean

The Trinity River (Texas, USA) contains in its watershed 23 different reservoir lakes, the largest one being Lake Livingston situated in the lower Trinity River watershed and two potentially polluting metroplexes, Dallas and Houston. In order to determine fluxes of nutrients and trace metals to Galveston Bay, a survey that included 24 discreet samples collected over a year and at various stages of discharge was carried out during 2000–2001. Geochemical (i.e., sorption by Fe oxyhydroxides), biological (i.e., seasonal uptake by sinking algae in Lake Livingston), and hydrological (i.e., dilution effects by increasing flow rates) controls were found to be mainly responsible for variations in dissolved trace metal concentrations rather than pollution sources. The Trinity River loads of suspended sediments and pollutant trace metals entering Galveston Bay at Anahuac were <20% of those reaching Lake Livingston, and only a few percent of the total upstream trace metal load is entering the Gulf of Mexico. Thus, during the transit through the 23 man-made lakes and an estuary, >96% of the pollutant trace metal load is lost to sediments.     

Text, talk, things, and the subpolitics of performing place

This article tells the story of how a group of Dutch and Belgian citizens organized themselves to promote an area that they valued, to put it on the map, to raise awareness about its qualities, and to protect it from urban and industrial development. Our theoretical perspective focuses on the performative and political aspects of this place-making process and the discursive and material practices involved. We connect this to Beck’s concept of subpolitics.Our findings show how the group performed this place not only through text and talk - giving the area a name, using their knowledge and expertise to raise awareness about its values, lobbying and cooperating with decision-makers -, but also through things - installing art objects and information signs that articulate certain characteristics and values of the area. Our findings demonstrate the struggles involved in these performances. The group involved multiple perspectives on what the important values and characteristics of the area are and on what strategies would work best in trying to influence decision-making and protect the area. However, the use of expertise as the main strategy to gain influence excluded the more critical and activist strategies and privileging archaeological and historical values and characteristics came at the expense of attention on agricultural and natural values.Our findings make clear that performing place cannot be taken to be homogeneous and that it inevitably involves multiple perspectives and demands. The struggles, power relations and dynamics of inclusion and exclusion that this multiplicity implicates reveal a form of sub-politics that involves both politicization and depoliticization. Also, it is a form of subpolitics that is more diverse and ambiguous than Beck’s conceptualization presupposes by its emphasis on the role of outsiders as a homogeneous group.     

Petrographic, mineralogy, and geochemistry of coals of Pabedana, Kerman Province, Central Iran

This paper discusses the result of the detailed investigations carried out on the coal characteristics, including coal petrography and its geochemistry of the Pabedana region. A total of 16 samples were collected from four coal seams d2, d4, d5, and d6 of the Pabedana underground mine which is located in the central part of the Central-East Iranian Microcontinent. These samples were reduced to four samples through composite sampling of each seam and were analyzed for their petrographic, mineralogical, and geochemical compositions. Proximate analysis data of the Pabedana coals indicate no major variations in the moisture, ash, volatile matter, and fixed carbon contents in the coals of different seams. Based on sulfur content, the Pabedana coals may be classified as low-sulfur coals. The low-sulfur contents in the Pabedana coal and relatively low proportion of pyritic sulfur suggest a possible fresh water environment during the deposition of the peat of the Pabedana coal. X-ray diffraction and petrographic analyses indicate the presence of pyrite in coal samples. The Pabedana coals have been classified as a high volatile, bituminous coal in accordance with the vitrinite reflectance values (58.75–74.32 %) and other rank parameters (carbon, calorific value, and volatile matter content). The maceral analysis and reflectance study suggest that the coals in all the four seams are of good quality with low maceral matter association. Mineralogical investigations indicate that the inorganic fraction in the Pabedana coal samples is dominated by carbonates; thus, constituting the major inorganic fraction of the coal samples. Illite, kaolinite, muscovite, quartz, feldspar, apatite, and hematite occur as minor or trace phases. The variation in major elements content is relatively narrow between different coal seams. Elements Sc,, Zr, Ga, Ge, La, As, W, Ce, Sb, Nb, Th, Pb, Se, Tl, Bi, Hg, Re, Li, Zn, Mo, and Ba show varying negative correlation with ash yield. These elements possibly have an organic affinity and may be present as primary biological concentrations either with tissues in living condition and/or through sorption and formation of organometallic compounds.