Popigai crater: Origin and distribution of diamond-bearing impactites

Abstract— About three decades ago, a formerly unknown genetic type of natural diamonds was discovered in impact craters. Impact diamonds are currently known from a number of impact structures in Europe, Asia and North America, and it's likely that the number of finds will increase with time. The Popigai crater, Northern Siberia, where impact diamonds were first found, was specifically investigated in terms of geology, geophysics, petrography and mineralogy. Large resources of industrial impact diamonds were discovered, and these minerals were studied in detail. Authigenic impact diamonds occur in situ in shocked graphite-bearing gneisses that are found as inclusions in impact melt rocks: tagamites and suevites. According to the observed transformation of coexisting minerals, the lower estimated pressure of the coherent martensite transition of graphite to diamonds is 35 GPa. Impact diamonds inherit the original shape of graphite crystals and are composed of a polycrystalline structured aggregate of cubic and probably hexagonal carbon microcrystals 1–5 μm across. Numerous properties of diamonds depend on the high density of defects in the crystal lattice. Allothigenic impact diamonds occur in rocks produced by the homogenization and solidification of impact melt, which originated from the complete fusion of graphite-bearing precursor gneisses. These diamonds usually reflect the influence of the hot melt and are strongly corroded. Diamond-bearing tagamites and suevites in the Popigai crater interior occur as extended lens and sheets bodies and also as irregular small bodies. Diamond distribution depends on the original abundance of precursor graphite in the target rocks, on the superimposed shock-metamorphic zonation, and on the character of the ejection of shocked and melted material along different trajectories and azimuths. This has resulted in radial and concentric inhomogeneities in diamond distribution in the crater interior. On a second order, the distribution depends on the scale of melt contamination by clasts and fragments and by the duration of cooling of certain melt bodies and their constituents. Enrichment in diamonds at the margins of thick tagamite sheets is the result of rapid cooling, which prevents combustion of diamonds. A positive correlation between diamond content and the amount of phosphorus pentoxide in impactites indicates links to C and P probably in organic matter of the primary sedimentary rocks, which were subjected to granulitic metamorphism 2.4 Ga ago and melted at the time of impact 35.7 Ma ago.     

Mineralogy and petrology of melt rocks from the Popigai impact structure,Siberia

Abstract— The late Eocene Popigai impact structure of Siberia comprises an approximately 0.5–1.5 km thick, ˜100 km diameter sequence of clast-rich and clast-poor andesitic to rhyolitic impact melt rocks and impact breccias, underlain by Archean to Proterozoic crystalline basement and Proterozoic to Phanerozoic sedimentary rocks. The fine-grained to cryptocrystalline texture of the more melt-rich rocks, despite their occurrence in bodies locally in excess of 800 m thick and 28 km long, suggests that the melt crystallized in response to (1) cooling by the clast load, and/or; (2) rapid nucleation on finely brecciated clasts, which have since been assimilated and/or; (3) crystallization enhanced by the relatively low water contents of the melts. Rapid crystallisation of the melt is indicated by the lack of zoning in minerals, the presence of glass, the lack of strain recovery features in clasts and the lack of evidence for fractionation in the major and trace elements, including the rare earth elements. Optical and analytical electron microscopy reveal that the previously reported division of the melt rocks into high- and low-temperature variants based on hand sample appearance, or glass content, is not warranted. Clasts within the melt-rich rocks exhibit a wide range of shock metamorphic features, though they are not distributed in the impact melts in a systematic manner. This indicates that the melt-rich rocks were well mixed during their formation, thus juxtaposing unshocked with shocked material. Injection of mesostasis melt into partially melted checkerboard plagioclase and orthopyroxene clasts also occurred during this mixing stage.     

A study of lunar impact crater size-distributions

Discrepancies in published crater frequency data prompted this study of lunar crater distributions. Effects modifying production size distributions of impact craters such as surface lava flows, blanketing by ejecta, superposition, infilling, and abrasion of craters, mass wasting, and the contribution of secondary and volcanic craters are discussed. The resulting criteria have been applied in the determination of the size distributions of unmodified impact crater populations in selected lunar regions of different ages. The measured cumulative crater frequencies are used to obtain a general calibration size distribution curve by a normalization procedure. It is found that the lunar impact crater size distribution is largely constant in the size range 0.3 km ?D ? 20 km for regions with formation ages between ≈ 3 × 10⁹ yr and ? 4 × 10⁹ yr. A polynomial of 4th degree, valid in the size range 0.8 km ?D ? 20 km, and a polynomial of 7th degree, valid in the size range 0.3 km ?D ? ? 20 km, have been approximated to the logarithm of the cumulative crater frequencyN as a function of the logarithm of crater diameterD. The resulting relationship can be expressed asN ～D ^α(D) where α is a function depending onD. This relationship allows the comparison of crater frequencies in different size ranges. Exponential relationships with constant α, commonly used in the literature, are shown to inadequately approximate the lunar impact crater size distribution. Deviations of measured size distributions from the calibration distribution are strongly suggestive of the existence of processes having modified the primary impact crater population.     

The nature and emplacement of distal aqueous-rich ejecta deposits from Hale crater,Mars

Hale crater formed in the Early to Middle Amazonian and is one of the best preserved large craters on Mars. We focus on the emplacement of previously mapped distal continuous ejecta and newly recognized discontinuous distal ejecta deposits reaching up to 450 km northeast of Hale. The distal continuous ejecta deposits are typically tens of meters thick, likely water-rich, and subsequent dewatering of some resulted in flow along gradients of 10 m km^-1 for distances of tens of kilometers. The discontinuous distal ejecta are typically <10 m thick with volumes generally <0.5 km³ and embay Hale secondaries, which occur up to ~600 km from Hale. Both continuous and discontinuous distal ejecta deposits are typically smooth at scales of tens to hundreds of meters, relatively dark-toned, devoid of eolian bedforms, inferred to be mostly fine-grained, and were likely emplaced within hours to 1–2 days after impact. The occurrence of well-preserved discontinuous distal ejecta at Hale is unusual compared to other large Martian craters and could be due to impact into an ice-rich substrate that enabled their formation and (or) their survival after minimal postimpact degradation relative to older craters. The pristine nature of distal continuous and discontinuous distal deposits at Hale and the preservation of associated secondaries imply (1) low erosion rates after the Hale impact, comparable to those estimated elsewhere during the Amazonian; (2) the impact did not significantly influence long-term global or regional scale geomorphic activity or climate; and (3) the Hale impact occurred after late alluvial fan activity in Margaritifer Terra.     

Martian subsurface properties and crater formation processes inferred from fresh impact crater geometries

Abstract— The geometry of simple impact craters reflects the properties of the target materials, and the diverse range of fluidized morphologies observed in Martian ejecta blankets are controlled by the near‐surface composition and the climate at the time of impact. Using the Mars Orbiter Laser Altimeter (MOLA) data set, quantitative information about the strength of the upper crust and the dynamics of Martian ejecta blankets may be derived from crater geometry measurements. Here, we present the results from geometrical measurements of fresh craters 3–50 km in rim diameter in selected highland (Lunae and Solis Plana) and lowland (Acidalia, Isidis, and Utopia Planitiae) terrains. We find large, resolved differences between the geometrical properties of the freshest highland and lowland craters. Simple lowland craters are 1.5–2.0 times deeper (≥5s?_o difference) with >50% larger cavities (≥2s?_o) compared to highland craters of the same diameter. Rim heights and the volume of material above the preimpact surface are slightly greater in the lowlands over most of the size range studied. The different shapes of simple highland and lowland craters indicate that the upper ?6.5 km of the lowland study regions are significantly stronger than the upper crust of the highland plateaus. Lowland craters collapse to final volumes of 45–70% of their transient cavity volumes, while highland craters preserve only 25–50%. The effective yield strength of the upper crust in the lowland regions falls in the range of competent rock, approximately 9–12 MPa, and the highland plateaus may be weaker by a factor of 2 or more, consistent with heavily fractured Noachian layered deposits. The measured volumes of continuous ejecta blankets and uplifted surface materials exceed the predictions from standard crater scaling relationships and Maxwell's Z model of crater excavation by a factor of 3. The excess volume of fluidized ejecta blankets on Mars cannot be explained by concentration of ejecta through nonballistic emplacement processes and/or bulking. The observations require a modification of the scaling laws and are well fit using a scaling factor of ?1.4 between the transient crater surface diameter to the final crater rim diameter and excavation flow originating from one projectile diameter depth with Z = 2.7. The refined excavation model provides the first observationally constrained set of initial parameters for study of the formation of fluidized ejecta blankets on Mars.     

An integrated geophysical and geological study of the Monturaqui impact crater,Chile

Abstract— –The Monturaqui impact crater (350–370 m in diameter and 0.1 Ma old), located in a remote area in northern Chile, was surveyed in December 2003 with detailed geophysics (gravity and magnetics), topography, petrophysics, and geology. The geology of the Monturaqui area is characterized by a basement of Paleozoic granites overlain by Pliocene ignimbrite units. No impact breccia was found in the area. The granites are the main lithology affected by the impact. Although the granite samples analyzed did not show evidence of shock metamorphism, quartz, and to a lesser extent feldspar and biotite grains from impactite samples exhibit different degrees of shock, ranging from planar microdeformation and cleavage to the development of intense planar deformation features (PDFs) and diaplectic glasses in some grains. The differential GPS survey allowed the creation of a detailed digital elevation model of the crater. Its dimensions are 370 m along the east‐west direction, 350 m along the north‐south direction, and ～～34 m deep. The crater exhibits a circular morphology with a preferred northwest‐southeast elongation that coincides with the steepest slopes (～～35°) on the southeast edge. The newly acquired gravity data shows a negative anomaly of ～～1 mGal at the center and allowed the creation of a 3‐D model with a RMS error of <0.1 mGal, which supports the predictions of a fracturing‐induced low‐density granitic layer on top of the unfractured basement.     

Intra‐crater sedimentary deposits at the Haughton impact structure,Devon Island,Canadian High Arctic

Abstract— Detailed field mapping has revealed the presence of a series of intra‐crater sedimentary deposits within the interior of the Haughton impact structure, Devon Island, Canadian High Arctic. Coarse‐grained, well‐sorted, pale gray lithic sandstones (reworked impact melt breccias) unconformably overlie pristine impact melt breccias and attest to an episode of erosion, during which time significant quantities of impact melt breccias were removed. The reworked impact melt breccias are, in turn, unconformably overlain by paleolacustrine sediments of the Miocene Haughton Formation. Sediments of the Haughton Formation were clearly derived from pre‐impact lower Paleozoic target rocks of the Allen Bay Formation, which form the crater rim in the northern, western, and southern regions of the Haughton structure. Collectively, these field relationships indicate that the Haughton Formation was deposited up to several million years after the formation of the Haughton crater and that they do not, therefore, represent an immediate, post‐impact crater lake deposit. This is consistent with new isotopic dating of impactites from Haughton that indicate an Eocene age for the impact event (Sherlock et al. 2005). In addition, isolated deposits of post‐Miocene intra‐crater glacigenic and fluvioglacial sediments were found lying unconformably over remnants of the Haughton Formation, impact melt breccias, and other pre‐impact target rock formations. These deposits provide clear evidence for glaciation at the Haughton crater. The wealth and complexity of geological and climatological information preserved as intra‐crater deposits at Haughton suggests that craters on Mars with intra‐crater sedimentary records might present us with similar opportunities, but also possibly significant challenges.     

Transport and emplacement of crater and basin deposits

Material is ejected from impact craters in ballastic trajectories; it impacts first near the crater rim and then at progressively greater ranges. Ejecta from craters smaller than approximately 1 km is laid predominantly on top of the surrounding surface. With increasing crater size, however, more and more surrounding surface will be penetrated by secondary cratering action and these preexisting materials will be mixed with primary crater ejecta. Ejecta from large craters and especially basin forming events not only excavate preexisting, local materials, but also are capable of moving large amounts of material away from the crater. Thus mixing and lateral transport give rise to continuous deposits that contain materials from within and outside the primary crater. As a consequence ejecta of basins and large highland craters have eroded and mixed highland materials throughout geologic time and deposited them in depressions inside and between older crater structures.Because lunar mare surfaces contain few large craters, the mare regolith is built up by successive layers of predominantly primary ejecta. In contrast, the lunar highlands are dominated by the effects of large scale craters formed early in lunar history. These effects lead to thick fragmental deposits which are a mixture of primary crater material and local components. These deposits may also properly be named regolith though the term has been traditionally applied only to the relatively thin fine grained surficial deposit on mare and highland terranes generated during the past few billion year. We believe that the surficial highland regolith - generated over long periods of time - rests on massive fragmental units that have been produced during the early lunar history.     

Chemical compositions of impact melt breccias and target rocks from the Tenoumer impact crater,Mauritania

Abstract— The impact melt breccias from the Tenoumer crater (consisting of a fine‐grained intergrowth of plagioclase laths, pyroxene crystals, oxides, and glass) display a wide range of porosity and contain a large amount of target rock clasts. Analyses of major elements in impact melt rocks show lower contents of SiO₂, Al₂O₃, and Na₂O, and higher contents of MgO, Fe₂O₃, and CaO, than the felsic rocks (i.e., granites and gneisses) of the basement. In comparison with the bulk analyses of the impact melt, the glass is strongly enriched in Si‐Al, whereas it is depleted both in Mg and Fe; moreover, the impact melt rocks are variably enriched or depleted in some REE with respect to the felsic and mafic bedrock types. Gold is slightly enriched in the impact melt, and Co, Cr, and Ni abundances are possibly due to a contribution from mafic bedrock. Evidences of silicate‐carbonate liquid immiscibility, mainly as spherules and globules of calcite within the silicate glass, have been highlighted. HMX mixing calculation confirm that the impact melt rocks are derived from a mixing of at least six different target lithologies outcropping in the area of the crater. A large contribution is derived from granitoids (50%) and mica schist (17–19%), although amphibolites (?15%), cherty limestones (?10%), and ultrabasites (?6%) components are also present. The very low abundances of PGE in the melt rock seem to come mainly from some ultrabasic target rocks; therefore, the contamination from the meteoritic projectile appears to have been negligible.     

Millochau crater, Mars: Infilling and erosion of an ancient highland impact crater

The geology and stratigraphy of Millochau crater (21.4° S, 275° W), located in the highlands of Tyrrhena Terra, Mars, are documented through geomorphic analyses and geologic mapping. Crater size-frequency distributions and superposition relationships are used to constrain relative ages of geologic units and determine the timing and duration of the geologic processes that modified Millochau rim materials and emplaced deposits on Millochau's floor. Crater size-frequency distributions show a Middle Noachian age for rim materials and Middle Noachian to Early Hesperian ages for most of the interior deposits. Valley networks and gullies incised within Millochau's rim materials and interior wall, respectively, indicate fluvial activity was an important erosional process. Millochau contains an interior plateau, offset northeast of Millochau's center, which rises up to 400 m above the surrounding crater floor and slopes downward to the south and west. Layers exposed along the northern and eastern scarp boundaries of the plateau are tens to hundreds of meters thick and laterally continuous in MOC images. These layers suggest most materials within Millochau were emplaced by sedimentary processes (e.g., fluvial or eolian), with the potential for lacustrine deposition in shallow transient bodies of water and contributions of volcanic airfall. Mass wasting may have also contributed significant quantities of material to Millochau's interior, especially to the deposits surrounding the plateau. Superposition relationships combined with impact crater statistics indicate that most deposition and erosion of Millochau's interior deposits is ancient, which implies that fluvial activity in this part of Tyrrhena Terra is much older than in the eastern Hellas region. Eolian processes mobilized sediment to form complicated patterns of long- and short-wavelength dunes, whose emplacement is controlled by local topography. These deposits are some of the youngest within Millochau (Amazonian) and eolian modification may be ongoing.     

Stratigraphy, mineralogy, and origin of layered deposits inside Terby crater, Mars

The 174 km diameter Terby impact crater (28.0°S-74.1°E) located on the northern rim of the Hellas basin displays anomalous inner morphology, including a flat floor and light-toned layered deposits. An analysis of these deposits was performed using multiple datasets from Mars Global Surveyor, Mars Odyssey, Mars Express and Mars Reconnaissance Orbiter missions, with visible images for interpretation, near-infrared data for mineralogical mapping, and topography for geometry. The geometry of layered deposits was consistent with that of sediments that settled mainly in a sub-aqueous environment, during the Noachian period as determined by crater counts. To the north, the thickest sediments displayed sequences for fan deltas, as identified by 100 m to 1 km long clinoforms, as defined by horizontal beds passing to foreset beds dipping by 6-10° toward the center of the Terby crater. The identification of distinct sub-aqueous fan sequences, separated by unconformities and local wedges, showed the accumulation of sediments from prograding/onlapping depositional sequences, due to lake level and sediment supply variations. The mineralogy of several layers with hydrated minerals, including Fe/Mg phyllosilicates, supports this type of sedimentary environment. The volume of fan sediments was estimated as >5000 km³ (a large amount considering classical martian fan deltas such as Eberswalde (6 km³)) and requires sustained liquid water activity. Such a large sedimentary deposition in Terby crater is characteristic of the Noachian/Phyllosian period during which the environment favored the formation of phyllosilicates. The latter were detected by spectral data in the layered deposits of Terby crater in three distinct layer sequences. During the Hesperian period, the sediments experienced strong erosion, possibly enhanced by more acidic conditions, forming the current morphology with three mesas and closed depressions. Small fluvial valleys and alluvial fans formed subsequently, attesting to late fluvial processes dated as late Early to early Late Hesperian. After this late fluvial episode, the Terby impact crater was submitted to aeolian processes and permanent cold conditions with viscous flow features. Therefore, the Terby crater displays, in a single location, geologic features that characterize the three main periods of time on Mars, with the presence of one of the thickest sub-aqueous fan deposits reported on Mars. The filling of Terby impact crater is thus one potential “reference geologic cross-section” for Mars stratigraphy.     

Target rocks,impact glasses,and melt rocks from the Lonar impact crater,India: Petrography and geochemistry

Abstract— The Lonar crater, India, is the only well‐preserved simple crater on Earth in continental flood basalts; it is excavated in the Deccan trap basalts of Cretaceous‐Tertiary age. A representative set of target basalts, including the basalt flows excavated by the crater, and a variety of impact breccias and impact glasses, were analyzed for their major and trace element compositions. Impact glasses and breccias were found inside and outside the crater rim in a variety of morphological forms and shapes. Comparable geochemical patterns of immobile elements (e.g., REEs) for glass, melt rock and basalt indicates minimal fractionation between the target rocks and the impactites. We found only little indication of post‐impact hydrothermal alteration in terms of volatile trace element changes. No clear indication of an extraterrestrial component was found in any of our breccias and impact glasses, indicating either a low level of contamination, or a non‐chondritic or otherwise iridium‐poor impactor.     

Inverted channel deposits on the floor of Miyamoto crater, Mars

Morphological features on the western floor of Miyamoto crater in southwestern Meridiani Planum, Mars, are suggestive of past fluvial activity. Imagery from the High Resolution Imaging Science Experiment (HiRISE) gives a detailed view of raised curvilinear features that appear to represent inverted paleochannel deposits. The inverted terrain appears to be capped with a resistant, dark-toned deposit that is partially covered by unconsolidated surficial materials. Subsequent to deposition of the capping layer, erosion of the surrounding material has left the capping materials perched on pedestals of uneroded basal unit material. Neither the capping material nor the surrounding terrains show any unambiguous morphological evidence of volcanism or glaciation. The capping deposit may include unconsolidated or cemented stream deposits analogous to terrestrial inverted channels in the Cedar Mountain Formation near Green River, Utah. In addition to this morphological evidence for fluvial activity, phyllosilicates have been identified in the basal material on the floor of Miyamoto crater by orbital spectroscopy, providing mineralogical evidence of past aqueous activity. Based on both the morphological and mineralogical evidence, Miyamoto crater represents an excellent site for in situ examination and sampling of a potentially habitable environment.     

Organosilane occurrence in irghizite samples from the Zhamanshin impact crater,Kazakhstan

Abstract— The composition of surface deposits on vesicle walls in irghizites (i.e., impact glasses at site) from the Zhamanshin meteorite crater were studied using time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS). The cavity walls are unique interfaces for condensation of gases from the superheated, high‐silica melt during the impact. Initially, signals from the cavity wall are dominated by hydrocarbon fragments whereas the glass fracture face surrounding the cavity gave only signals corresponding to glass components. After 12 h in ultra high vacuum (UHV), signals from the cavity wall are dominated by peaks corresponding to fragments normally measured from organosilanes and organosiloxanes with the majority of the hydrocarbon signals markedly reduced. Characteristic hydrocarbon fragments are now observed on the glass fracture surface next to the cavity in an annulus around the cavity perimeter. There are also minor signals in this region from organosilanes and organosiloxanes. In contrast, four tektites (Australites) (i.e., glassy distal ejecta) gave no organosilane or organosiloxane signals after the same preparation and vacuum evaporation procedure. These species appear to be formed only at the impact site where higher levels of organic material are likely to be present in soil and are trapped before evaporation. This appears to be the first report of naturally occurring silicon‐organic compounds.     

Weathering features in shocked quartz from the Ries impact crater,Germany

Abstract— Shocked quartz from the ejecta of the Ries impact structure has been investigated by analytical transmission electron microscopy (ATEM). Quartz grains display numerous planar fractures (PFs) and planar deformation features (PDFs). Both are partly or fully replaced by a mineral of the kaolinite group (likely halloysite). Its formation involves fluid circulation into the dense fracture networks, dissolution and removal of the amorphous phase initially present in PDFs, and finally, precipitation and crystallization of the kaolinite group mineral from solutions resulting from the chemical alteration of adjacent minerals (feldspars and biotite). Kaolinite group minerals are typical of hydrothermal alteration at low temperature, in humid climate, and under moderately acid conditions and, thus, this alteration may not be directly related to the impact event itself. However, the weathering features were strongly enhanced by the shock‐generated microstructure, in particular by fractures that provided pathways for fluid circulation.     

Multiple fluvial reworking of impact ejecta—A case study from the Ries crater,southern Germany

Abstract— Impact ejecta eroded and transported by gravity flows, tsunamis, or glaciers have been reported from a number of impact structures on Earth. Impact ejecta reworked by fluvial processes, however, are sparsely mentioned in the literature. This suggests that shocked mineral grains and impact glasses are unstable when eroded and transported in a fluvial system. As a case study, we here present a report of impact ejecta affected by multiple fluvial reworking including rounded quartz grains with planar deformation features and diaplectic quartz and feldspar glass in pebbles of fluvial sandstones from the “Monheimer Höhensande” ?10 km east of the Ries crater in southern Germany.     

Shock metamorphism and impact melting in small impact craters on Earth: Evidence from Kamil crater,Egypt

Kamil is a 45 m diameter impact crater identified in 2008 in southern Egypt. It was generated by the hypervelocity impact of the Gebel Kamil iron meteorite on a sedimentary target, namely layered sandstones with subhorizontal bedding. We have carried out a petrographic study of samples from the crater wall and ejecta deposits collected during our first geophysical campaign (February 2010) in order to investigate shock effects recorded in these rocks. Ejecta samples reveal a wide range of shock features common in quartz‐rich target rocks. They have been divided into two categories, as a function of their abundance at thin section scale: (1) pervasive shock features (the most abundant), including fracturing, planar deformation features, and impact melt lapilli and bombs, and (2) localized shock features (the least abundant) including high‐pressure phases and localized impact melting in the form of intergranular melt, melt veins, and melt films in shatter cones. In particular, Kamil crater is the smallest impact crater where shatter cones, coesite, stishovite, diamond, and melt veins have been reported. Based on experimental calibrations reported in the literature, pervasive shock features suggest that the maximum shock pressure was between 30 and 60 GPa. Using the planar impact approximation, we calculate a vertical component of the impact velocity of at least 3.5 km s^?1. The wide range of shock features and their freshness make Kamil a natural laboratory for studying impact cratering and shock deformation processes in small impact structures.     

Distant ejecta from the Lockne marine‐target impact crater,Sweden

Abstract— The Lockne impact event took place in a Middle Ordovician (455 Ma) epicontinental sea. The impact resulted in an at least 13.5 km wide, concentric crater in the sea floor. Lockne is one of very few locations where parts of an ejecta layer have been preserved outside the crater structure. The ejecta from the Lockne impact rests on progressively higher stratigraphic levels with increasing distance from the crater, hence forming a slightly inclined discontinuity surface in the pre‐impact strata. We report on a ～30 cm thick sandy layer at Hallen, 45 km south of the crater centre. This layer has a fining upward sequence in its lower part, followed by low‐angle cross‐laminations indicating two opposite current directions. It is rich in quartz grains with planar deformation features and contains numerous, up to 15 cm large, granite clasts from the crystalline basement at the Lockne impact site. The layer is within a sequence dated to the Baltoniodus gerdae conodont subzone. The dating is corroborated by chitinozoans indicating the latest Kukruse time below and the late Idavere above the impact layer. According to the chitinozoans biostratigraphy, some erosion may have occurred because of deposition of the impact layer. The Hallen outcrop, today 45 km from the centre of the Lockne crater, is at present the most distant accessible occurrence of ejecta from the Lockne impact. It is also the most distant location so far found where the resurge of water towards the crater has affected the bottom sediments. A greater crater diameter than hitherto assumed, thus representing greater impact energy, might explain the extent of the ejecta blanket. Fluidisation of ejecta, to be expected at a marine‐target impact, might furthermore have facilitated the wide distribution of ejecta.     

Geophysical studies of the Montagnais impact crater,Canada

Abstract— The 45-km diameter Montagnais impact structure, Nova Scotia, Canada, is characterized by a positive, circular 8 mGal gravity anomaly associated with its central uplift. The negative gravity anomaly, which is expected for a complex crater of this size, is not observed within the structure, and magnetic data lack any well-defined, crater-related signature. The absence of a negative gravity anomaly implies that no low-density zone generally related to fracturing and brecciation exists. Since Montagnais appears well preserved, this zone has not been removed by erosion. Its formation may have been impeded due to the lack of competency in the target rocks. The crater was formed in a shallow marine environment where the lack of strength in the unconsolidated sediments may have prevented the preservation of voids and fractures that cause a negative gravity anomaly as observed over other impact craters. Additionally, the efficient absorption of impact energy by unconsolidated target material may have inhibited fracture/void development. Although the gravity signature of impact craters formed on land is well known, structures occurring in unconsolidated target material, such as continental shelf environments, constitute another signature that should also be recognized.     

El'gygytgyn impact crater,Russia: Structure,tectonics, and morphology

Abstract— The 3.6 Myr old El'gygytgyn impact crater is located in central Chukotka, northeastern Russia. The crater is a well‐preserved impact structure with an inner basin about 15 km in diameter, surrounded by an uplifted rim about 18 km in diameter. The flat floor of the crater is in part occupied by Lake El'gygytgyn, 12 km in diameter, and surrounding terraces. The average profile of the rim is asymmetric, with a steep inner wall and a gentle outer flank. The rim height is about 180 m above the lake level and 140 m above the surrounding area. An outer ring feature, on average 14 m high, occurs at about 1.75 crater radii from the center of the structure. El'gygytgyn crater is surrounded by a complex network of faults. The density of the faults decreases from the bottom of the rim to the rim crest and outside the crater to a distance of about 2.7 crater radii. Lake El'gygytgyn is surrounded by a number of lacustrine terraces. Only minor remnants are preserved of the highest terraces, 80 and 60 m above the present‐day lake level. The widest of the terraces is 40 m above the current lake level and surrounds the lake on the west and northwest sides. The only outlet of the lake is the Enmivaam River, which cuts through the crater rim in the southeast. In terms of structure, El'gygytgyn is well preserved and displays some interesting, but not well understood, features (e.g., an outer ring), similar to those observed at a few other impact structures.