Identification of the Bloody Creek structure,a possible impact crater in southwestern Nova Scotia,Canada

Abstract— An approximately 0.4 km diameter elliptical structure formed in Devonian granite in southwestern Nova Scotia, herein named the Bloody Creek structure (BCS), is identified as a possible impact crater. Evidence for an impact origin is based on integrated geomorphic, geophysical, and petrographic data. A near‐continuous geomorphic rim and a 10 m deep crater that is infilled with lacustrine sediments and peat define the BCS. Ground penetrating radar shows that the crater has a depressed inner floor that is sharply ringed by a 1 m high buried scarp. Heterogeneous material under the floor, interpreted as deposits from collapse of the transient cavity walls, is overlain by stratified and faulted lacustrine and wetland sediments. Alteration features found only in rim rocks include common grain comminution, polymict lithic microbreccias, kink‐banded feldspar and biotite, single and multiple sets of closely spaced planar microstructures (PMs) in quartz and feldspar, and quartz mosaicism, rare reduced mineral birefringence, and chlorite showing plastic deformation and flow microtextures. Based on their form and crystallographic orientations, the quartz PMs consist of planar deformation features that document shock‐metamorphic pressures ≤25 GPa. The age of the BCS is not determined. The low depth to diameter ratio of the crater, coupled with anomalously high shock‐metamorphic pressures recorded at its exposed rim, may be a result of significant post‐impact erosion. Alternatively, impact onto glacier ice during the waning stages of Wisconsinian deglaciation (about 12 ka BP) may have resulted in dissipation of much impact energy into the ice, resulting in the present morphology of the BCS.     

Shocked quartz grains in the early Cambrian Vakkejokk Breccia,Sweden—Evidence of a marine impact

Here we present a study of the abundance and orientation of planar deformation features (PDFs) in the Vakkejokk Breccia, a proposed lower Cambrian impact ejecta layer in the North‐Swedish Caledonides. The presence of PDFs is widely accepted as evidence for shock metamorphism associated with cosmic impact events and their presence confirms that the Vakkejokk Breccia is indeed the result of an impact. The breccia has previously been divided into four lithological subunits (from bottom to top), viz. lower polymict breccia (LPB), graded polymict breccia (GPB), top sandstone (TS), and top conglomerate (TC). Here we show that the LPB contains no shock metamorphic features, indicating that the material derives from just outside of the crater and represents low‐shock semi‐autochthonous bombarded strata. In the overlying, more fine‐grained GPB and TS, quartz grains with PDFs are relatively abundant (2–5% of the grain population), and with higher shock levels in the upper parts, suggesting that they have formed by reworking of more distal ejecta by resurge of water toward the crater in a marine setting. The absence of shocked quartz grains in the TC indicates that this unit represents later slumps associated with weathering and erosion of the protruding crater rim. Sparse shocked quartz grains (<0.2%) were also found in sandstone beds occurring at the same stratigraphic level as the Vakkejokk Breccia 15–20 km from the inferred crater site. It is currently unresolved whether the sandstone at these distal sites is related to the impact or just contains rare reworked quartz grains with PDFs.     

The Foelsche structure,Northern Territory,Australia: An impact crater of probable Neoproterozoic age

Abstract— The Foelsche structure is situated in the McArthur Basin of northern Australia (16°40′ S, 136°47′ E). It comprises a roughly circular outcrop of flat‐lying Neoproterozoic Bukalara Sandstone, overlying and partly rimmed by tangentially striking, discontinuous outcrops of dipping, fractured and brecciated Mesoproterozoic Limmen Sandstone. The outcrop expression coincides with a prominent circular aeromagnetic anomaly, which can be explained in terms of the local disruption and removal or displacement of a regional mafic igneous layer within a circular area at depth. Samples of red, lithic, pebbly sandstone from the stratigraphically lowest exposed levels of the Bukalara Sandstone within the Foelsche structure contain detrital quartz grains displaying mosaicism, planar fractures (PFs) and planar deformation features (PDFs). PFs and PDFs occur in multiple intersecting sets with orientations consistent with a shock metamorphic origin. The abundance and angular nature of the shocked grains indicates a nearby provenance. Surface expression and geophysical data are consistent with a partly buried complex impact crater of ?6 km in diameter with an obscured central uplift ?2 km in diameter. The deformed outcrops of Limmen Sandstone are interpreted as relics of the original crater rim, but the central region of the crater, from which the shocked grains were likely derived, remains buried. From the best available age constraints the Foelsche structure is most likely of Neoproterozoic age.     

MicroRaman spectroscopy of anomalous planar microstructures in quartz from Mt. Oikeyama: Discovery of a probable impact crater in Japan

Abstract– Planar deformation features (PDFs) and planar fractures (PFs) have been found and confirmed by optical microscope observations and microRaman spectroscopy in quartz grains from Mt. Oikeyama (Akaishi Mountains, Central Japan), for which the semicircular topographic feature of the ridge suggests a crater formed by an impact event. According to the optical microscope observations, a low shock pressure (8–10 GPa) is estimated by the occurrence of basal or ω PDFs leading to lack of multiple sets of PDFs. In addition, a new type of planar microstructure was found in several quartz grains. The microRaman characteristics of PDFs in quartz from Mt. Oikeyama show the amorphous state indicating the presence of weak broad bands at 400 and 800 cm^?1 peak positions. These characteristics are indicative of PDFs that are limited to shocked quartz. This indicates an impact origin for distinct planar microstructures in quartz from Mt. Oikeyama.     

The Keurusselkä impact structure,Finland—Impact origin confirmed by characterization of planar deformation features in quartz grains

Abstract– Although the meteorite impact origin of the Keurusselkä impact structure (central Finland) has been established on the basis of the occurrence of shatter cones, no detailed microscopic examination of the impactites from this structure has so far been made. Previous microscope investigations of in situ rocks did not yield any firm evidence of shock features (Raiskila et al. 2008; Kinnunen and Hietala 2009). We have carried out microscopic observations on petrographic thin sections from seven in situ shatter cone samples and report here the discovery of planar fractures (PFs) and planar deformation features (PDFs) in quartz and feldspar grains. The detection and characterization of microscopic shock metamorphic features in the investigated samples substantiates a meteorite impact origin for the Keurusselkä structure. The crystallographic orientations of 372 PDF sets in 276 quartz grains were measured, using a universal stage (U‐stage) microscope, for five of the seven distinct shatter cone samples. Based on our U‐stage results, we estimate that investigated shatter cone samples from the Keurusselkä structure have experienced peak shock pressures from approximately 2 GPa to slightly less than 20 GPa for the more heavily shocked samples. The decoration of most of the PDFs with fluid inclusions also indicates that these originally amorphous shock features were altered by postimpact processes. Finally, our field observations indicate that the exposed surface corresponds to the crater floor; it is, however, difficult to estimate the exact diameter of the structure and the precise amount of material that has been eroded since its formation.     

The Sirente crater field,Italy

Abstract— We propose the Sirente crater field to be the first discovered impact craters in Italy. They are located in the Sirente plain within the mountains of the Abruzzo region, central Italy. The craters are distributed in a field 450 m long and 400 m wide. This field consists of ?17 smaller craters close to a larger main crater. The main crater is located in the southern end of the crater field and is 140 m long and 115 m wide, measured rim‐to‐rim. It has a well‐developed, saddle‐shaped rim that rises at a maximum 2.2 m above the surrounding plain. Radiocarbon dating of the target surface preserved below the rim gave a calibrated age of formation at about a.d. 412 (1650 ± 40 radiocarbon years b.p.). This young age is consistent with the apparent little modification of the rim. The morphology of the main crater and its relation to a crater field strongly points to its origin by impact from a projectile that broke up during its passage through the atmosphere. Quartz is very rare in the target and no planar deformation features have been found so far. The rim material and the upper 4 m of the main crater infill are impregnated with ferric oxides, which gives a more reddish colour compared to the other sediments of the plain. Rusty crusts with high Fe and Mn content occur in the rim material, but have not been found in the plain's sediments. Some of these crusts can be separated by magnet, and have sporadic micron‐sized Ni‐rich granules. The main crater is in the size range of the craters with explosive dispersion of the projectile and has many features comparable to both large experimental and meteoritic impact craters formed in loose sediments. We suggest that this crater represents a rare example of well‐preserved, small impact crater formed in unconsolidated target materials.     

Ramgarh,Rajasthan, India: A 10 km diameter complex impact structure

The Ramgarh structure is a morphological landmark in southeastern Rajasthan, India. Its 200 m high and 3.5–4 km wide annular collar has provoked many hypotheses regarding its origin, including impact. Here, we document planar deformation features, planar fractures, and feather features in quartz grains of the central part of the Ramgarh structure, which confirm its impact origin. The annular collar does not mark the crater rim but represents the outer part of a central uplift of an approximately 10 km diameter complex impact structure. The apparent crater rim is exposed as a low‐angle normal fault and can be traced as lineaments in remote sensing imagery. The central uplift shows a stratigraphic uplift of ~1000 m and is rectangular in shape. It is dissected by numerous faults that are co‐genetic with the formation of the central uplift. The central uplift has a bilateral symmetry along an SW‐NE axis, where a large strike‐slip fault documents a strong horizontal shear component. This direction corresponds to the assumed impact trajectory from the SW toward the NE. The uprange sector is characterized by concentric reverse faults, whereas radial faults dominate downrange. Sandstones of the central uplift are infiltrated by Fe‐oxides and suggest an impact‐induced hydrothermal mineralization overprint. The impact may have occurred into a shallow water environment as indicated by soft‐sediment deformation features, observed near the apparent crater rim, and the deposition of a diamictite layer above them. Gastropods embedded in the diamictite have Middle Jurassic age and may indicate the time of the impact.     

Shock barometry of the Siljan impact structure,Sweden

Abstract– The Siljan impact structure in Sweden is the largest confirmed impact structure in Western Europe. Despite this, the structure has been poorly studied in the past, and detailed studies of shock metamorphic features in the target lithologies are missing. Here, we present the results of a detailed systematic search for shock metamorphic features in quartz grains from 73 sampled localities at Siljan. At 21 localities from an area approximately 20 km in diameter located centrally in the structure, the orientations of 2851 planar deformation feature sets in 1179 quartz grains were measured. Observations of shatter cones outside of the zone with shocked quartz extend the total shocked area to approximately 30 km in diameter. The most strongly shocked samples, recording pressures of up to 20 GPa, occur at the very central part of the structure, and locally in these samples, higher pressures causing melting conditions in the affected rocks were reached. Pressures recorded in the studied samples decrease outwards from the center of the structure, forming roughly circular envelopes around the proposed shock center. Based on the distribution pattern of shocked quartz at Siljan, the original transient cavity can be estimated at approximately 32–38 km in diameter. After correcting for erosion, we conclude that the original rim to rim diameter of the Siljan crater was somewhere in the size range 50–90 km.     

Shock metamorphic features in quartz grains from the Saarijärvi and Söderfjärden impact structures,Finland

Shock metamorphic features at the Saarijärvi (D > 2 km) and Söderfjärden (D = 6.5 km) structures in Finland have so far only been studied tentatively, although both are considered to be proven impact structures. This work presents the first detailed universal stage study of planar deformation features (PDFs), feather feature lamellae (FFL), and planar fractures (PFs) in quartz grains from a polymict impact breccia dike from Söderfjärden, and from sedimentary crater‐fill rocks from Saarijärvi. Planar microstructures, particularly PDFs, are very rare and poorly developed or preserved in Saarijärvi, whereas in Söderfjärden they are much more common and well defined. Miller–Bravais indices of the planar microstructures in both Saarijärvi and Söderfjärden are indicative of relatively low‐shock pressure but high shear conditions, only compatible with an impact origin for these structures. Although a Proterozoic age for Saarijärvi cannot be ruled out, the observations of shock features throughout the sedimentary crater‐fill sequence and a brecciated sedimentary dike below the crater floor are more consistent with a Lower Cambrian (or younger) impact age.     

Shock metamorphism of quartz at the submarine Mjølnir impact crater,Barents Sea

Abstract— Shock metamorphosed quartz grains have been discovered in a drill core from the central peak of the Late Jurassic, marine Mjølnir structure; this finding further corroborates the impact origin of Mjølnir. The intersected strata represent the Upper Jurassic Hekkingen Formation and underlying Jurassic and Upper Triassic formations. The appearance, orientation, and origin of shock features in quartz grains and their stratigraphic distribution within the core units have been studied by optical and transmission electron microscopy. The quartz grains contain planar fractures (PFs), planar deformation features (PDFs), and mechanical Brazil twins. The formation of PFs is the predominant shock effect and is attributed to the large impedance differences between the water‐rich pores and constituent minerals in target sediments. This situation may have strengthened tensional/extensional and shear movements during shock compression and decompression. The combination of various shock effects indicates possible shock pressures between 5 and at least 20 GPa for three core units with a total thickness of 86 m (from 74.00 m to 171.09 m core depth). Crater‐fill material from the lower part of the core typically shows the least pressures, whereas the uppermost part of the allochthonous crater deposits displays the highest pressures. The orientations of PFs in studied quartz grains seem to become more diverse as the pressure rises from predominantly (0001) PFs to a combination of (0001), , and orientations. However, the lack of experimental data on porous sedimentary rocks does not allow us to further constrain the shock conditions on the basis of PF orientations.     

Planar deformation features in quartz from impact‐produced polymict breccia of the Xiuyan crater,China

Abstract– The 1.8 km‐diameter Xiuyan crater is an impact structure in northeastern China, exposed in a Proterozoic metamorphic rock complex. The major rocks of the crater are composed of granulite, hornblendite, gneiss, tremolite marble, and marble. The bottom at the center of the crater covers about 100 m thick lacustrine sediments underlain by 188 m thick crater‐fill breccia. A layer of polymict breccia composed of clasts of granulite, gneiss, hornblendite, and fragments of glass as well as clastic matrix, occurs near the base, in the depth interval from 260 to 295 m. An investigation in quartz from the polymict breccia in the crater‐fill units reveals abundant planar deformation features (PDFs). Quartz with multiple sets of PDFs is found in clasts of granulite that consist of mainly quartz and feldspar, and in fine‐grained matrix of the impact‐produced polymict breccia. A universal stage was used to measure the orientation of PDFs in 70 grains of quartz from five thin sections made from the clasts of granulite of polymict breccia recovered at the depth of 290 m. Forty‐four percent of the quartz grains contain three sets of PDFs, and another 40% contain two sets of PDFs. The most abundant PDFs are rhombohedron forms of , , and with frequency of 33.5, 22.3, and 9.6%, respectively. A predominant PDF form of in quartz suggests a shock pressure >20 GPa. The occurrence of PDFs in quartz from the polymict breccia provides crucial evidence for shock metamorphism of target rocks and confirms the impact origin of this crater, which thus appears to be the first confirmed impact crater in China.     

LAGUNA GUATAVITA: NOT METEORITIC,PROBABLE SALT COLLAPSE CRATER

Laguna Guatavita (Colombia), a crater 700 m across and 125 m deep containing a central lake, appears not to be a meteorite crater as widely supposed. The tectonic style is not that of an impact site and there is no raised rim or ejected debris. We could find no impactite, shock metamorphic effects or shock fractures (shatter cones). Most likely it is a collapsed crater caused by the solution and withdrawal of salt from an underlying anticline     

An integrated geophysical and geological study of the Monturaqui impact crater,Chile

Abstract— –The Monturaqui impact crater (350–370 m in diameter and 0.1 Ma old), located in a remote area in northern Chile, was surveyed in December 2003 with detailed geophysics (gravity and magnetics), topography, petrophysics, and geology. The geology of the Monturaqui area is characterized by a basement of Paleozoic granites overlain by Pliocene ignimbrite units. No impact breccia was found in the area. The granites are the main lithology affected by the impact. Although the granite samples analyzed did not show evidence of shock metamorphism, quartz, and to a lesser extent feldspar and biotite grains from impactite samples exhibit different degrees of shock, ranging from planar microdeformation and cleavage to the development of intense planar deformation features (PDFs) and diaplectic glasses in some grains. The differential GPS survey allowed the creation of a detailed digital elevation model of the crater. Its dimensions are 370 m along the east‐west direction, 350 m along the north‐south direction, and ～～34 m deep. The crater exhibits a circular morphology with a preferred northwest‐southeast elongation that coincides with the steepest slopes (～～35°) on the southeast edge. The newly acquired gravity data shows a negative anomaly of ～～1 mGal at the center and allowed the creation of a 3‐D model with a RMS error of <0.1 mGal, which supports the predictions of a fracturing‐induced low‐density granitic layer on top of the unfractured basement.     

Weathering features in shocked quartz from the Ries impact crater,Germany

Abstract— Shocked quartz from the ejecta of the Ries impact structure has been investigated by analytical transmission electron microscopy (ATEM). Quartz grains display numerous planar fractures (PFs) and planar deformation features (PDFs). Both are partly or fully replaced by a mineral of the kaolinite group (likely halloysite). Its formation involves fluid circulation into the dense fracture networks, dissolution and removal of the amorphous phase initially present in PDFs, and finally, precipitation and crystallization of the kaolinite group mineral from solutions resulting from the chemical alteration of adjacent minerals (feldspars and biotite). Kaolinite group minerals are typical of hydrothermal alteration at low temperature, in humid climate, and under moderately acid conditions and, thus, this alteration may not be directly related to the impact event itself. However, the weathering features were strongly enhanced by the shock‐generated microstructure, in particular by fractures that provided pathways for fluid circulation.     

Kgagodi Basin: The first impact structure recognized in Botswana

Abstract— The 3.4 km wide, so‐called Kgagodi Basin structure, which is centered at longitude 27°34.4′ E and latitude 22°28.6′ S in eastern Botswana, has been confirmed as a meteorite impact structure. This crater structure was first recognized through geophysical analysis; now, we confirm its impact origin by the recognition of shock metamorphosed material in samples from a drill core obtained close to the crater rim. The structure formed in Archean granitoid basement overlain and intruded by Karoo dolerite. The crater yielded a gravity model consistent with a simple bowl‐shape crater form. The drill core extends to a depth of 274 m and comprises crater fill sediments to a depth of 158 m. Impact breccia was recovered only between 158 and 165 m depth, below which locally brecciated basement granitoids grade into fractured and eventually undeformed crystalline basement, from ～250 m depth. Shock metamorphic effects were only found in granitoid clasts in the narrow breccia zone. This breccia is classified as suevitic impact breccia due to the presence of melt and glass fragments, at a very small abundance. The shocked grains are exclusively derived from granitoid target material. Shock effects include multiple sets of planar deformation features in quartz and feldspar; diaplectic quartz, and partially and completely isotropized felsic minerals, and rare melt fragments were encountered. Abundances of some siderophile elements and especially, Ir, in suevitic breccia samples are significantly elevated compared to the contents in the target rocks, which provides evidence for the presence of a small meteoritic component. Kgagodi is the first impact structure recognized in the region of the Kalahari Desert in southern Africa. Based on lithological and first palynological evidence, the age of the Kgagodi structure is tentatively assigned to the upper Cretaceous to early Tertiary interval. Thus, the crater fill has the potential to provide a long record of paleoclimatic conditions.     

Libyan Desert Glass area in western Egypt: Shocked quartz in bedrock points to a possible deeply eroded impact structure in the region

Libyan Desert Glass (LDG) is an enigmatic natural glass, about 28.5 million years old, which occurs on the floor of corridors between sand dunes of the southwestern corner of the Great Sand Sea in western Egypt, near the Libyan border. The glass occurs as centimeter‐ to decimeter‐sized, irregularly shaped, and strongly wind‐eroded pieces. The origin of the LDG has been the subject of much debate since its discovery, and a variety of exotic processes were suggested, including a hydrothermal sol‐gel process or a lunar volcanic source. However, evidence of an impact origin of these glasses included the presence of schlieren and partly or completely digested minerals, such as lechatelierite, baddeleyite (a high‐T breakdown product of zircon), and the presence of a meteoritic component in some of the glass samples. The source material of the glass remains an open question. Geochemical data indicate that neither the local sands nor sandstones from various sources in the region are good candidates to be the sole precursors of the LDG. No detailed studies of all local rocks exist, though. There are some chemical and isotopic similarity to rocks from the BP and Oasis impact structures in Libya, but no further evidence for a link between these structures and LDG was found so far. These complications and the lack of a crater structure in the area of the LDG strewn field have rendered an origin by airburst‐induced melting of surface rocks as a much‐discussed alternative. About 20 years ago, a few shocked quartz‐bearing breccias (float samples) were found in the LDG strewn field. To study this question further, several basement rock outcrops in the LDG area were sampled during three expeditions in the area. Here we report on the discovery of shock‐produced planar microdeformation features, namely planar fractures (PFs), planar deformation features (PDFs), and feather features (FFs), in quartz grains from bedrock samples. Our observations show that the investigated samples were shocked to moderate pressure, of at least 16 GPa. We interpret these observations to indicate that there was a physical impact event, not just an airburst, and that the crater has been almost completely eroded since its formation.     

Suevite breccia of the Ries impact crater,Germany: Petrography,chemistry and shock metamorphism of crystalline rock clasts

Abstract— Clasts of deep-seated crystalline basement rocks in suevites of the Ries crater, Germany, were catalogued lithologically and classified with regard to their degree of shock metamorphism. The sample suite consisted of 806 clasts from 10 outcrops in fallout suevites and 447 clasts from drill cores encountering crater suevite in the crater interior. These clasts can be grouped into seven types of metamorphic and nine types of igneous rocks. One hundred forty-three clasts, representing these lithologies, were analyzed for major element bulk composition. The fallout suevite contains on average 4 vol% of crystalline basement clasts, 0.4 vol% of sedimentary rocks, 16 vol% of glass bodies (some of them aerodynamically shaped), and 79 vol% of groundmass. On average, 52% of all crystalline clasts are from metamorphic sources and 42% are of igneous origin. Using the shock classification of Stöffler (1974), 8% of all crystalline clasts appear unshocked (<10 Gpa), and 34, 30 and 27% of clasts are shocked to stages I (10–35 Gpa), II (35–45 GPa) and III (45–60 GPa), respectively. The bulk composition of suevite glasses is consistent with the modal proportions of crystalline rock types observed in the clast populations. This indicates that the glasses originate by shock-fusion of a similarly composed basement. The crater suevite contains the same crystalline rock types that occur in the fallout suevites. The bore hole “Nördlingen 1973” yields an average of 62 vol% metamorphic and 38 vol% igneous rocks. The crater suevite differs from fallout suevites by a higher clast/glass ratio, by preponderance (65–95%) of clasts shocked to stage I only, and by the absence of aerodynamically shaped glass bodies. The source of crystalline clasts and melt particles of suevites is a volume of rocks, located deep in the crystalline basement, to which the projectile transmittted most of its energy so that only rocks of the basement were shocked by pressures exceeding 10 GPa (deep-burst impact model). Fallout suevites were ejected, propelled by an expanding plume of vaporized rock, and withdrew preferentially from this volume melt and highly shocked clasts, leaving in the transient cavity the crater suevite with more clasts of modest shock levels and less melt.     

Geology and impact features of Riachão structure,northern Brazil

Riachão, located at S7°42′/W46°38′ in Maranhão State, northeastern Brazil, is a complex impact structure of about 4.1 km diameter, formed in Pennsylvanian to Permian sedimentary rocks of the Parnaíba Basin sequence. Although its impact origin was already proposed in the 1970s, information on its geology and shock features is still scarce in the literature. We present here the main geomorphological and geological characteristics of the Riachão impact structure obtained by integrated geophysical and remote sensing analysis, as well as geological field work and petrographic analysis. The identified lithostratigraphic units consist of different levels of the Pedra de Fogo Formation and, possibly, the Piauí Formation. Our petrographic analysis confirms the presence of shock‐diagnostic planar microdeformation structures in quartz grains of sandstone from the central uplift as evidence for an impact origin of the Riachão structure. The absence of crater‐filling impact breccias and melt rocks, shatter cones, as well as the restricted occurrence of microscopic shock effects, suggests that intense and relatively deep erosion has occurred since crater formation.     

The age of the Saltpan impact crater,South Africa

Abstract— The 1.13-km-diameter Pretoria Saltpan impact crater is located about 40 km NNW of Pretoria, South Africa. The crater is situated in 2.05 Ga old Nebo granite of the Bushveld Complex that is locally intruded by about 1.3 Ga old volcanic rocks. In 1988, a borehole was drilled in the center of the crater. At depths >90 m, breccias were found that contained minerals with characteristic shock-metamorphic features, thus confirming the impact origin of the crater. Fragments of impact glass were recovered from the melt breccias and several hundred sub-millimeter-sized glass fragments were subjected to fission track analysis. The measurements were complicated by the inhomogeneous composition of the impact glasses, but analysis of a large number of tracks yielded an age of 220 ± 52 ka for the Saltpan crater.