Geomechanical modelling of fault reactivation in the Cooper Basin,Australia

The Australian Cooper Basin is a structurally complex intra-cratonic basin with large unconventional hydrocarbon potential. Fracture stimulation treatments are used extensively in this basin to improve the economic feasibility; however, such treatments may induce fault activity and risk the integrity of hydrocarbon accumulations. Fault reactivation may not only encourage tertiary fluid migration but also decrease porosity through cataclasis and potentially compartmentalise the reservoir. Relatively new depth-converted three-dimensional seismic surveys covering the Dullingari and Swan Lake 3D seismic surveys were structurally interpreted and geomechanically modelled to constrain the slip tendency, dilation tendency and fracture stability of faults under the present-day stress. A field-scale pore pressure study found a maximum pressure gradient of 11.31 kPa/m within the Dullingari 3D seismic survey, and 11.14 kPa/m within the Swan Lake 3D seismic survey. The present-day stress tensor was taken from previously published work, and combined with local pore pressure gradients and depth-converted field-scale fault geometries, to conclude that SE–NW-striking strike-slip faults are optimally oriented to reactivate and dilate. High-angle faults striking approximately E–W appear most likely to dilate, and act as fluid conduits irrespective of being modelled under a strike-slip or compressional stress regime. Near-vertical SE–NW and NE–SW-striking faults were modelled to be preferentially oriented to slip and reactivate under a strike-slip stress regime. Considering that SE–NW-striking strike-slip faults have only recently been interpreted in the literature, it is possible that many reservoir simulations and development plans have overlooked or underestimated the effect that fault reactivation may have on reservoir properties. Future work investigating the likelihood that fracture stimulation treatments may be interacting, and reactivating, pre-existing faults and fractures would benefit field development programs utilising high-pressure hydraulic fracture stimulation treatments.     

Geomorphic observations from southwestern terminus of Palghat Gap,south India and their tectonic implications

The region around Wadakkancheri, Trichur District, Kerala is known for microseismic activity, since 1989. Studies, subsequent to 2nd December 1994 (M =4.3) earthquake, identified a south dipping active fault (Desamangalam Fault) that may have influenced the course of Bharathapuzha River. The ongoing seismicity is concentrated on southeast of Wadakkancheri and the present study concentrated further south of Desamangalam Fault. The present study identifies the northwestern continuity of NW–SE trending Periyar lineament, which appears to have been segmented in the area. To identify the subtle landform modifications induced by ongoing tectonic adjustments, we focused on morphometric analysis. The NW–SE trending lineaments appear to be controlling the sinuosity of smaller rivers in the area, and most of the elongated drainage basins follow the same trend. The anomalies shown in conventional morphometric parameters, used for defining basins, are also closely associated with the NW–SE trending Periyar lineament/s. A number of brittle faults that appear to have been moved are consistent with the present stress regime and these are identified along the NW–SE trending lineaments. The current seismic activities also coincide with the zone of these lineaments as well as at the southeastern end of Periyar lineament. These observations suggest that the NW–SE trending Periyar lineaments/faults may be responding to the present N–S trending compressional stress regime and reflected as the subtle readjustments of the drainage configuration in the area.     

The role of E–W basement faults in the Mesozoic geodynamic evolution of the Gafsa and Chotts basins,south-central Tunisia

The Gafsa and Chotts intracratonic basins in south-central Tunisia are transitional zones between the Atlasic domain to the north and the Saharan platform to the south. The principal aim of this paper is to unravel the geodynamic evolution of these basins following an integrated approach including seismic, well log and gravity data. These data are used to highlight the tectonic control on the deposition of Jurassic and Lower Cretaceous series and to discuss the role of the main faults that controlled the basin architecture and Cretaceous–Tertiary inversion. The horizontal gravity gradient map of the study area highlights the pattern of discontinuities within the two basins and reveals the presence of deep E–W basement faults. Primary attention is given to the role played by the E–W faults system and that of the NW–SE Gafsa fault which was previously considered active since the Jurassic. Facies and thickness analyses based on new seismic interpretation and well data suggest that the E–W-oriented faults controlled the subsidence distribution especially during the Jurassic. The NW–SE faults seem to be key structures that controlled the basins paleogeography during Late Cretaceous–Cenozoic time. The upper Triassic evaporite bodies, which locally outline the main NW–SE Gafsa fault, are regarded as intrusive salt bodies rather than early diapiric extrusions as previously interpreted since they are rare and occurred only along main strike-slip faults. In addition, seismic lines show that Triassic rocks are deep and do not exhibit true diapiric features.     

Active faults pattern and interplay in the Azerbaijan region (NW Iran)

Northwest Iran is dominated by two main sets of active strike slip faults that accommodate oblique convergence between the Arabian and Iranian Plates. The best known are the right-lateral North-Tabriz, Qoshadagh, Maragheh and Zagros (Main Recent) strike slip Faults. This work reports that these dominant NW–SE to E–W striking faults are conjugate to smaller, NNE–SSW striking, left-lateral faults with minor dip slip component. All of these active faults displace Precambrian rock units, which suggests that they root in the crystalline basement of the NW Iranian microcontinent. Coulomb stress variance during co-seismic rupture along one of these faults may cause reactivation of the other faults. The minor set of left-lateral fault is therefore important to introduce in seismic risk assessment.     

Structural controls on the evolution of the Kutai Basin,East Kalimantan

The Kutai Basin formed in the middle Eocene as a result of extension linked to the opening of the Makassar Straits and Philippine Sea. Seismic profiles across the northern margin of the Kutai Basin show inverted middle Eocene half-graben oriented NNE–SSW and N–S. Field observations, geophysical data and computer modelling elucidate the evolution of one such inversion fold. NW–SE and NE–SW trending fractures and vein sets in the Cretaceous basement have been reactivated during the Tertiary. Offset of middle Eocene carbonate horizons and rapid syn-tectonic thickening of Upper Oligocene sediments on seismic sections indicate Late Oligocene extension on NW–SE trending en-echelon extensional faults. Early middle Miocene (N7–N8) inversion was concentrated on east-facing half-graben and asymmetric inversion anticlines are found on both northern and southern margins of the basin. Slicken-fibre measurements indicate a shortening direction oriented 290°–310°. NE–SW faults were reactivated with a dominantly dextral transpressional sense of displacement. Faults oriented NW–SE were reactivated with both sinistral and dextral senses of movement, leading to the offset of fold axes above basement faults. The presence of dominantly WNW vergent thrusts indicates likely compression from the ESE. Initial extension during the middle Eocene was accommodated on NNE–SSW, N–S and NE–SW trending faults. Renewed extension on NW–SE trending faults during the late Oligocene occurred under a different kinematic regime, indicating a rotation of the extension direction by between 45° and 90°. Miocene collisions with the margins of northern and eastern Sundaland triggered the punctuated inversion of the basin. Inversion was concentrated in the weak continental crust underlying both the Kutai Basin and various Tertiary basins in Sulawesi whereas the stronger oceanic crust, or attenuated continental crust, underlying the Makassar Straits, acted as a passive conduit for compressional stresses.     

The Vallo di Diano and Auletta extensional basins in the southern Apennines (Italy): a simple model for a complex setting

The aim of this paper was to provide a significant case‐history concerning the evolution of a segmented system of extensional faults and related basins, investigated by a set of seismic reflection profiles. We investigated two kinematically linked semi‐grabens, developed at the hangingwall of two opposite‐dipping normal faults: the Vallo di Diano and Auletta basins, located in the southern Apennines, one of the most seismically active regions of the Italian peninsula. Our interpretation suggests that the Pliocene–Quaternary tectonic history consists of a single extensional phase, where the major NW–SE trending normal faults, generating the basins, and the strike‐slip and transtensional faults connecting adjacent normal fault segments, simultaneously act, being part of the same extensional system. We also conclude that major normal faults, bordering the basins, should be considered as potential seismogenic sources in the seismic hazard evaluation.     

Active tectonics,seismicity and geomorphology with special reference to Normandy (France)

Integrated studies based on tectonic, seismotectonic and geomorphological analyses indicate that Normandy (northwest France) has been an active area during the Quaternary. Topography and landform discontinuities reflect the dislocation and differential uplift of a late Cenozoic platform. The tectonic activity is represented by (i) active faults, indicated by linear scarps and seismic activity, (ii) offsetting of pre‐existing surfaces, (iii) Plio‐Pleistocene sedimentation restricted within narrow subsiding zones, and (iv) morphometric properties of drainage basins that indicate zones of differential uplift. The inferred strain pattern involves (i) a shortening direction that strikes NW–SE as expected in the European context of Alpine compression, and (ii) a NE–SW trending extension accommodated by NW–SE normal faults. The geomorphological systems encountered in Normandy preferentially record differential vertical displacements. Copyright © 2000 John Wiley & Sons, Ltd.     

L'île Crémieu (Jura,France), un plateau calcaire épargné par la tectonique ?

The ‘Île Crémieu’, a plateau of Jurassic limestones located in the southern border of the Bresse and at the Jura front, is generally considered as non-deformed. Quaternary ice sheets and drainage have underlined and cleaned out some fracture planes trending NNE and NW–SE that border and crosscut the ‘Île Crémieu’. The analysis of seismic profiles reveals NNE-trending normal faults and NW–SE-trending strike-slip faults, crosscutting the basement to Late Miocene layers. Microtectonic fieldwork shows that these faults exist and were activated during the main Cainozoic tectonic events. To cite this article: M. Rocher et al., C. R. Geoscience 336 (2004).     

The application of remote sensing and structural analysis in groundwater exploration in basement terrains, Darfur region, Western Sudan

Darfur region is one of the most vulnerable areas in Sudan that suffer from shortage in water supply. The objective of the current study is to utilize remote sensing techniques combined with the structural analysis to recognize the most potential fracture zones for groundwater occurrences in the hard rock terrains of Darfur region. The old ductile deformation features in Darfur region delineated from Landsat imageries are used for the structural analysis to determine and classify the fractures in the hard rock terrains of the region. Based on the structural analysis conducted in this study, Darfur region was divided into two domains—the western domain of the pre-Pan-African age that is affected by the two deformational phases (D1 and D2), and the eastern domain represented by the basement related to the Pan-African orogeny. The most potential fractures in the western domain are in the NW–SE and NE–SW trends that classified as extensional and release open fractures for the deformations D1 and D2. In the eastern domain, the main potential fractures for groundwater occurrence are in E–W and N–S directions that are classified as extensional and release open fractures of the deformation D3. From the results of the structural analysis, the main potential fracture systems in Darfur region trend are NW–SE, NE–SW, and E–W directions. The intersections of these fracture systems are the most promising targets for drilling, with consideration of the topography, the rates of recharge, and the underlying geology. The geophysical data and boreholes information in Zalingei and north of El Geneina areas in West Darfur confirm the results obtained from remote sensing data and structural analysis, in which the NW–SE, NE–SW, and E–W fractures trends are the most potential fractures in Darfur region.     

The influence of pre-existing structure on the growth of syn-sedimentary normal faults in a deltaic setting,Niger Delta

Three dimensional seismic-reflection data from the western Niger Delta were used to investigate the segmentation and linkage of a syn-sedimentary normal fault array and to estimate the influence of a pre-existing normal fault on the geometry and growth of younger faults. The nucleation, growth and linkage of a regional (seaward-dipping) deltaic fault system were analyzed on reflectivity time-/horizon slices and vertical seismic sections. In the deep subsurface, a master fault that consists of two segments (northwestern, NW, and southeastern, SE) grew through time into a single fault by lateral tip propagation reaching a final length of about 15 km. After attaining this length, displacement along the fault system developed non-uniformly through time. The analysis of the hanging-wall sediments of the deep-seated master fault shows two different processes of vertical linkage above the NW and SE segment. The SE segment links vertically to several younger faults contemporaneously with displacement accumulation on the master fault; in contrast, fault linkage above the NW segment occurred only after an interval of master-fault inactivity connecting the deep-seated structure upwards to a single syn-sedimentary normal fault. The observed differences in fault development suggest that although multi-segment deltaic faults form single fault systems after segment linkage, individual pre-linkage characteristics can be preserved, supporting a possibly diverse upward growth and connection to younger faults in the overburden. The geological interpretations presented highlight the influence of large deep-rooted structures on the development, location and geometry of shallow deltaic faults, documenting the influence of an older structural grain on delta tectonics.     

Neogene sediment deformations and tectonic features of northeastern Tunisia: evidence for paleoseismicity

The Neogene stratigraphic series is characterized by predominant clayey facies alternated by other sand layers. The outcrop and subsurface studies show varied and complex styles of deformations and lead to relate the structures to paleoseismic events. The seismicity of eastern onshore and offshore Tunisian margin follows the master fault corridors oriented globally N–S, E–W, and NW–SE that correspond to the bordering faults of grabens and syncline corridors and associated faulted drag fold structures oriented NE–SW. Epicenters of magnitudes between 3 and 5 are located along these border fault corridors. The Neogene strata record brittle structures, including numerous and deep faults and fractures with straight and high-angle dipping planes. The structuring of NE–SW en echelon folds and synclines inside and outside NW–SE and E–W right lateral and N–S and NE–SW left lateral tectonic corridors indicates the strike-slip type of bordering faults and their seismogenic nature. Wrench fault movements that induce mud and salt diapirs, mud volcanoes, and intrusive ascensions are related to seismic shocks. Seismic waves caused by activity along one, or most likely, several tectonic structures would have propagated throughout the Quaternary cover producing seismites. The similarity of deposits, structuring, and seismites between the Tunis-Bizerte to the North and Hammamet-Mahdia to the South accredits the hypothesis that the seismic episodes might have affected sedimentation patterns along the Sahalian large geographic area. The paleoseismic events in northeastern Tunisia might be related to tectonic fault reactivations through time. This hypothesis is consistent with the geomorphologic context of the study area, characterized by several morphostructural lineaments with strong control on the sediment distribution, as well as uplifted and subsiding terrains. The estimated magnitude of the seismic events and the great regional tectonically affected areas demonstrate that the northeastern Tunisia experienced stress through the last geological episodes of its evolution. This Neogene kinematic reconstruction highlights the neotectonic system inducing the actual seismicity on this margin. Therefore, there is a straight relationship between deepseated faults and seismicity.     

Paleostress analysis of the brittle deformations on the northwestern margin of the Red Sea and the southern Gulf of Suez,Egypt

Shear fractures, dip-slip, strike-slip faults and their striations are preserved in the pre- and syn-rift rocks at Gulf of Suez and northwestern margin of the Red Sea. Fault-kinematic analysis and paleostress reconstruction show that the fault systems that control the Red Sea–Gulf of Suez rift structures develop in at least four tectonic stages. The first one is compressional stage and oriented NE–SW. The average stress regime index R' is 1.55 and S_Hmax oriented NE–SW. This stage is responsible for reactivation of the N–S to NNE, ENE and WNW Precambrian fractures. The second stage is characterized by WNW dextral and NNW to N–S sinistral faults, and is related to NW–SE compressional stress regime. The third stage is belonging to NE–SW extensional regime. The S_Hmax is oriented NW–SE parallel to the normal faults, and the average stress regime R' is equal 0.26. The NNE–SSW fourth tectonic stage is considered a counterclockwise rotation of the third stage in Pliocene-Pleistocene age. The first and second stages consider the initial stages of rifting, while the third and fourth represent the main stage of rifting.     

The Dihedral Angle and Intersection Processes of a Conjugate Strike‐Slip Fault System in the Tarim Basin,NW China

Recent studies, focused on dihedral angles and intersection processes, have increased understandings of conjugate fault mechanisms. We present new 3-D seismic data and microstructural core analysis in a case study of a large conjugate strike-slip fault system from the intracratonic Tarim Basin, NW China. Within our study area, "X" type NE and NW trending faults occur within CambrianOrdovician carbonates. The dihedral angles of these conjugate faults have narrow ranges, 19° to 62° in the Cambrian and 26° to 51° in the Ordovician, and their modes are 42° and 44° respectively. These data are significantly different from the ～60° predicted by the Coulomb fracture criterion. It is concluded that:(1) The dihedral angles of the conjugate faults were not controlled by confining pressure, which was low and associated with shallow burial;(2) As dihedral angles were not controlled by pressure they can be used to determine the shortening direction during faulting;(3) Sequential slip may have played an important role in forming conjugate fault intersections;(4) The conjugate fault system of the Tarim basin initiated as rhombic joints; these subsequently developed into sequentially active "X" type conjugate faults; followed by preferential development of the NW-trending faults; then reactivation of the NE trending faults. This intact rhombic conjugate fault system presents new insights into mechanisms of dihedral angle development, with particular relevance to intracratonic basins.     

Fractures and faults in volcanic rocks (Campi Flegrei,southern Italy): insight into volcano-tectonic processes

The present study was focused to analyze fractures and faults in the Campi Flegrei calderas presently hosting several volcanic edifices, such as lava domes, scoria, and tuff cones. A complex network of fractures and faults affects the volcanic rocks, mostly as planar with highly variable density. Frequently faults appearing as conjugate structures showing normal kinematics often associated with ductile deformation such as drag folds and deflexed layers, suggesting a syn-eruption deformation. However, the most of faults, mainly hosted along the caldera/crater rims, are very steep with dominant normal and secondary reverse movements. The fracture pattern indicates a slight prevalence of NE–SW and NW–SE directions, but N–S and E–W trends also occur. Fractures and faults found in rocks older than 15 ka (Neapolitan Yellow Tuff included), measured in western and eastern sectors of the study area, indicate a rotation of ca. 30° of the main directions among these two sectors. For the faults occurring along the caldera/crater rims, we suggest a kinematic evolution characterized by the reactivation of tensile fractures previously formed in response to both regional extension and locale resurgent dome. Finally, normal faults located in the central sector of caldera, between La Starza and Accademia localities, cutting the youngest volcanic deposits, indicate a constant NNE–SSW extension probably related to the caldera resurgence.     

Relationships between thrusts and normal faults in curved belts: New insight in the inversion tectonics of the Central-Northern Apennines (Italy)

The relationships between thrusts and normal faults represent primary constraints in the reconstruction of the modes and timing of pre-, syn- and post-orogenic deformation events in fold-and-thrust belts. Such relationships are well exposed in curved orogenic belts where the thrusts are oblique to the trend of normal faults.We study the NNE–SSW-trending Olevano-Antrodoco-Sibillini oblique thrust and its crosscutting relationships with NW–SE-trending normal faults in order to constrain the Neogene–Quaternary deformation history of the Central-Northern Apennine (Italy). The analysis of structural and geological data allowed us to reconstruct the geometric and kinematic constraints of two inversion events: 1 – During the Pliocene, positive inversion reactivated the NNE–SSW-trending pre-existing Ancona-Anzio normal fault as the Olevano-Antrodoco-Sibillini oblique thrust ramp and caused the shortcut of NW–SE-oriented normal faults; 2 – During the Quaternary, negative inversion reactivated NW–SE-trending pre-thrusting normal faults.The growth of the NW–SE Quaternary normal faults causes seismicity and is responsible of the development of wide Quaternary intramontane basins. Their distribution and the related seismicity have been controlled and compartmentalized by NNE–SSW-trending oblique thrusts. Thus, the crosscutting relationships between thrusts and normal faults are crucial in seismic hazard assessment.     

Structural controls on Witwatersrand gold mineralisation

Structural controls on the distribution of gold in the Witwatersrand Basin can be seen at scales ranging from that of thin sections up to regional seismic data sets. At the thin section scale, gold occurs largely in fractures with hydrocarbons. These fractures are associated with pulses of thrusting deformation that occurred in the latter stages of the basin's development. The distribution of thrust–fracture networks (and therefore gold) is controlled by the mechanical attributes of the host stratigraphy. Thrust displacements are generally very low, with structures exploiting depositional contacts and mesoscale sedimentary bedforms. Many of the small faults are isolated from each other with bimodal vergence between larger-scale thrusts of the same age. Early-formed faults and fractures become folded and faulted by subsequent propagation of larger-scale thrusts. These characteristics are consistent with formation of the mineralised thrust–fracture networks in the frontal, low-displacement parts of a thrust system. In the Carletonville goldfield, the prospectivity of the Ventersdorp Contact Reef (VCR) has been evaluated by using underground observations to pinpoint the structural habitat of gold, and therefore characterise the size of prospective zones around structures intersecting the VCR, mapped within 3D seismic data. In the Welkom goldfield, the controls on gold distribution at the Tshepong mine have been characterised from 3D seismic data, drilling and underground observations, and used to develop an ore-body model that aids reserve estimation and production planning.     

福建漳州盆地活动断裂研究

本文从形态学和运动学的角度,确定并系统地研究了二十条主要活动断裂。北西向断裂以正-左行走滑型为主,北东向断裂以右行走滑-逆断层为主,两组断裂构成活动断裂网络。用 C¹⁴年龄数据计算得到了最近5990—1870年以来,各取样点地壳平均升降速率的变化范围是+3.53mm/a 至-0.65mm/a。用布仑法求得的九龙江活动断裂现代平均滑动速率是1.7mm/a。更新世至现代构造应力场的最大主压应力是以缓倾角、走向为 NW290°左右为特征的。350m 深处最大主压应力是700—760bar。两组断裂交汇形成的高渗透率带,对形成对流型中、低温热水型热田是十分有利的。此外,对该区的地震活动性亦进行了讨论。     

滇西南2014年景谷中-强震群的地质构造成因——茶房-普文断裂带贯通过程的构造响应

2014年10—12月期间,云南景谷接连发生了Ms6.6、Ms5.8、Ms5.9三次中-强地震。为确定地震的地质构造成因,在地表调查的基础上,综合该区的地质构造情况、烈度与余震分布、震源机制解等资料,确定此次震群活动的宏观震中位于永平盆地东南侧山地,发震断层为地质与地貌表现不显著的NW向右旋走滑断层。此次震群活动及余震迁移过程指示,由于断层斜接部位岩桥的临时阻碍,Ms6.6地震破裂在向南东扩展过程中发生短暂停滞,突破障碍后进一步引发了Ms5.8和Ms5.9地震,这符合震源破裂沿NW向发震断裂分段破裂的行为。区域活动断裂的遥感解译结果发现,发震断层位置恰好处于NW向右旋走滑的茶房断裂与普文断裂之间,区域上属于该断裂带的不连贯部位,指示此次中-强震群活动应该是茶房-普文断裂带贯通过程的构造活动表现。结合思茅地块的历史地震资料发现,思茅地块地震活动多以小于等于6.8级为主,发震构造多为NW向断裂。指示在现今构造应力场作用下,该区NW向断裂的活动性相对NE向断裂更加显著,属于该区主要控震构造,应在今后的地震地质工作中给予更多关注。     

Effects of the hydrothermal circulation on the strain field of the Campanian Plain (southern Italy)

Focal mechanisms of earthquakes and fault‐slip data have been collected to constrain the strain regime acting in the hydrothermal zone and surrounding areas of the Campanian Plain (southern Italy), a NW–SE elongated structural depression. The NW–SE striking faults bounding the depression move in response to a NE–SW striking regional extension. Within the depression, an extended hydrothermal circulation occurs related to the Vesuvius, Campi Flegrei and Ischia active volcanoes. In this zone, the strike of the extension is N–S. Results from a finite element model constrained by the collected data show that the presence of a lower rigidity zone due to the hydrothermal circulation may explain (a) the observed deflection of the direction of regional extension, and (b) why large magnitude earthquakes occur at the boundaries of the hydrothermal zone and not along the faults delimiting the structural depression.     

The role of small‐scale fold and fault development in seismogenic zones: example of the western Huércal‐Overa Basin (eastern Betic Cordillera,Spain)

The NW–SE shortening between the African and the Eurasian plates is accommodated in the eastern Betic Cordillera along a broad area that includes large N‐vergent folds and kilometric NE–SW sinistral faults with related seismicity. We have selected the best exposed small‐scale tectonic structures located in the western Huércal‐Overa Basin (Betic Cordillera) to discuss the seismotectonic implications of such structures usually developed in seismogenic zones. Subvertical ESE–WNW pure dextral faults and E–W to ENE–ESW dextral‐reverse faults and folds deform the Quaternary sediments. The La Molata structure is the most impressive example, including dextral ESE–WNW Neogene faults, active southward‐dipping reverse faults and associated ENE–WSW folds. A molar M1 assigned to Mimomys savini allows for precise dating of the folded sediments (0.95–0.83 Ma). Strain rates calculated across this structure give ～0.006 mm a^?1 horizontal shortening from the Middle Pleistocene up until now. The widespread active deformations on small‐scale structures contribute to elastic energy dissipation around the large seismogenic zones of the eastern Betics, decreasing the seismic hazard of major fault zones. Copyright © 2009 John Wiley & Sons, Ltd.