The Equation of State for Caspian Sea Waters

The density ρ of Caspian Sea waters was measured as a function of temperature (273.15–343.15) K at conductivity salinities of 7.8 and 11.3 using the Anton-Paar Densitometer. Measurements were also made on one of the samples (S = 11.38) diluted with water as a function of temperature (T = 273.15–338.15 K) and salinity (2.5–11.3). These latter results have been used to develop an equation of state for the Caspian Sea (σ = ±0.007 kg m⁻³)

Opening and resetting temperatures in heating geochronological systems

We present a theoretical model for diffusive daughter isotope loss in radiochronological systems with increasing temperature. It complements previous thermochronological models, which focused on cooling, and allows for testing opening and resetting of radiochronometers during heating. The opening and resetting temperatures are, respectively,

Impact of land use change on groundwater quality in a typical karst watershed of southwest China: a case study of the Xiaojiang watershed,Yunnan Province

The impact of land-use change on the quality of groundwater in the Xiaotjiang watershed, China was assessed for the period 1982–2004. Groundwater samples were collected from 30 monitoring points across the watershed, and were representative of the various changes, determined by remote sensing and geographical information systems. The results indicate that 610 km² (60% of the total watershed area) were subject to land-use change during the period. The most important changes were the conversion of 135 km² of forested land to cultivated land, and 211 km² of unused land to cultivated land. The main impact was ascribed to diffuse pollution from fertilizers applied to newly cultivated land, and from building development. Overall the groundwater pH value was significantly increased, as were the concentrations of ions , , , , and Cl⁻ in groundwater whilst the concentrations of Ca²⁺ and declined. More precisely, in the regions where forested land and unused land were converted into cultivated land, the pH value and the concentrations of Mg²⁺, , , , , Cl⁻ increased whilst the concentrations of Ca²⁺ and declined. However in the region where cultivated land was converted into construction land, the pH value and the concentrations of Ca²⁺, Mg²⁺, , , , , , Cl⁻ increased.

---

Résumé  L’impact des changements de l’utilisation du territoire sur la qualité de l’eau souterraine dans le bassin versant de Xiaojiang, en Chine, a été évalué de 1982 à 2004. Des échantillons d’eau souterraine ont été récoltés à partir de 30 points d’observation éparpillés sur le bassin, représentant les divers changements déterminés par télédétection et système d’information géographique. Les résultats indiquent que 610 km² (soit 60% de la surface du bassin) ont été sujets à des modifications de l’utilisation du territoire sur cette période. Les changements les plus importants furent la conversion de 135 km² de forêt et 211 km² de terres inutilisées en terres cultivées. Le principal impact est attribué à la pollution diffuse des engrais utilisés en agriculture et pour les batiments. De manière générale le pH de l’eau souterraine a augmenté significativement, ainsi que les concentrations des ions , , , , et Cl⁻, tandis que les concentration en Ca²⁺ et ont diminué. Plus précisément dans les régions transformées en terres cultivées, la valeur du pH et les concentrations en Mg²⁺, , , , , Cl⁻ ont augmenté tandis que les concentrations en Ca²⁺ et ont diminué. Toutefois dans les régions cultivées converties en zones de construction, le pH et les concentrations en Ca²⁺, Mg²⁺, , , , , , Cl⁻ ont augmenté.

---

Resumen  El impacto del cambio en uso de la tierra en la calidad del agua en la cuenca Xiaojiang, China fue evaluado para el periodo 1982–2004. Muestras de agua subterránea fueron tomadas de 30 puntos de monitoreo a través de la cuenca, y fueron representativas de los múltiples cambios, determinados por sensores remotos y sistemas de información geográfica. Los resultados indican que 610 km² (60% del área total de la cuenca) estaban sujetos a cambios de uso de la tierra durante el periodo estudiado. Los cambios más importantes fueron la conversión de 135 km² de bosques a tierra cultivada, y 211 km² de tierra sin uso (ociosa) a tierra cultivada. El impacto principal fue causado por contaminación difusa de fertilizantes aplicados a la tierra recientemente cultivada, y a desarrollo de construcciones. En general el pH en agua subterránea creció significantemente, al igual que las concentraciones de los iones , , , , y Cl⁻ en agua subterránea mientras que las concentraciones de Ca²⁺ y decrecieron. Mas precisamente, en las regiones donde bosque y tierra ociosa fueron convertidas en tierra cultivada, el valor de pH y las concentraciones de Mg²⁺, , , , , Cl⁻ crecieron mientras las concentraciones de Ca²⁺ y decrecieron. Sin embargo en la región donde tierra cultivada fue convertida en construcciones, el valor de pH y las concentraciones de Ca²⁺, Mg²⁺, , , , , , Cl⁻ crecieron.

     

Crystal field and covalency of octahedral chromium in natural [8](Mg1?xCax) 3[6] (Al0.67Cr0.33)2Si3O12 garnets from upper mantle rocks

In the course of a thorough study of the influences of the second coordination sphere on the crystal field parameters of the 3d ^N -ions and the character of 3d ^N –O bonds in oxygen based minerals, 19 natural Cr³⁺-bearing (Mg,Ca)-garnets from upper mantle rocks were analysed and studied by electronic absorption spectroscopy, EAS. The garnets had compositions with populations of the ^[8] X-sites by 0.881 ± 0.053 (Ca + Mg) and changing Ca-fractions in the range 0.020 ≤ w _Ca[8] ≤ 0.745, while the ^[6] Y-site fraction was constant with x _Cr³⁺ _[6] = 0.335 ± 0.023. The garnets had colours from deeply violet-red for low Ca-contents (up to x _Ca = 0.28), grey with 0.28 ≤ x _Ca ≤ 0.4 and green with 0.4 ≤ x _Ca. The crystal field parameter of octahedral Cr³⁺ 10Dq decreases strongly on increasing Ca-fraction from 17,850 cm⁻¹ at x _Ca[8] = 0.020 to 16,580 cm⁻¹ at x _Ca[8] = 0.745. The data could be fit with two model which do statistically not differ: (1) two linear functions with a discontinuity close to x _Ca[8] ≈ 0.3,

Thermodynamic Properties of Brucite Determined by Solubility Studies and Their Significance to Nuclear Waste Isolation

Solubility experiments were conducted for the dissolution reaction of brucite, Mg(OH)₂ (cr): Experiments were conducted from undersaturation in deionized (DI) water and 0.010–4.4 m NaCl solutions at 22.5°C. In addition, brucite solubility was measured from supersaturation in an experiment in which brucite was precipitated via dropwise addition of 0.10 m NaOH into a 0.10 m MgCl₂ solution also at 22.5°C. The attainment of the reversal in equilibrium was demonstrated in this study. The solubility constant at 22.5°C at infinite dilution calculated from the experimental results from the direction of supersaturation by using the specific interaction theory (SIT) is: with a corresponding value of 17.0 ± 0.2 (2σ) when extrapolated to 25°C. The dimensionless standard chemical potential (μ°/RT) of brucite derived from the solubility data in 0.010 m to 4.4 m NaCl solutions from undersaturation extrapolated to 25°C is −335.76 ± 0.45 (2σ), with the corresponding Gibbs free energy of formation of brucite, , being −832.3 ± 1.1 (2σ) kJ mol⁻¹. In combination with the auxiliary thermodynamic data, the is calculated to be 17.1 ± 0.2 (2σ), based on the above Gibbs free energy of formation for brucite. This study recommends an average value of 17.05 ± 0.2 in logarithmic unit as solubility constant of brucite at 25°C, according to the values from both supersaturation and undersaturation. Sandia National Laboratories is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy’s National Nuclear Security Administration under Contract DE-AC04-94AL85000.     

The Chemical Speciation of Fe(III) in Freshwaters

Dialysis and chemical speciation modelling have been used to calculate activities of Fe³⁺ for a range of UK surface waters of varying chemistry (pH 4.3–8.0; dissolved organic carbon 1.7–40.3 mg l⁻¹) at 283 K. The resulting activities were regressed against pH to give the empirical model: . Predicted Fe³⁺ activities are consistent with a solid–solution equilibrium with hydrous ferric oxide, consistent with some previous studies on Fe(III) solubility in the laboratory. However, as has also sometimes been observed in the laboratory, the slope of the solubility equation is lower than the theoretical value of 3. The empirical model was used to predict concentrations of Fe in dialysates and ultrafiltrates of globally distributed surface and soil/groundwaters. The predictions were improved greatly by the incorporation of a temperature correction for , consistent with the temperature dependence of previously reported hydrous ferric oxide solubility. The empirical model, incorporating temperature effects, may be used to make generic predictions of the ratio of free and complexed Fe(III) to dissolved organic matter in freshwaters. Comparison of such ratios with observed Fe:dissolved organic matter ratios allows an assessment to be made of the amounts of Fe present as Fe(II) or colloidal Fe(III), where no separate measurements have been made. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Copper-gold endoskarns and high-Mg monzodiorite–tonalite intrusions at Mt. Shea,Kalgoorlie, Australia: implications for the origin of gold–pyrite–tennantite mineralization in the Golden Mile

Five Cu–Au epidote skarns are associated with the Mt. Shea intrusive complex, located in the 2.7–2.6 Ga Eastern Goldfields Province of the Archean Yilgarn craton, in greenstones bounded by the Boulder Lefroy and Golden Mile strike-slip faults, which control the Golden Mile (1,435 t Au) at Kalgoorlie and smaller “orogenic” gold deposits at Kambalda. The Cu–Au deposits studied are oxidized endoskarns replacing faulted and fractured quartz monzodiorite–granodiorite. The orebodies are up to 140 m long and 40 m thick. Typical grades are 0.5% Cu and 0.3 g/t Au although parts are richer in gold (1.5–4.5 g/t). At the Hannan South mine, the skarns consist of epidote, calcite, chlorite, magnetite (5–15%), and minor quartz, muscovite, and microcline. Gangue and magnetite are in equilibrium contact with pyrite and chalcopyrite. The As–Co–Ni-bearing pyrite contains inclusions of hematite, gold, and electrum and is intergrown with cobaltite and Cu–Pb–Bi sulfides. At the Shea prospect, massive, net-textured, and breccia skarns are composed of multistage epidote, actinolite, albite, magnetite (5%), and minor biotite, calcite, and quartz. Gangue and magnetite are in equilibrium with Co–Ni pyrite and chalcopyrite. Mineral-pair thermometry, mass-balance calculations, and stable-isotope data (pyrite δ³⁴S_CDT = 2.5‰, calcite δ¹³C_PDB = −5.3‰, and δ¹⁸O_SMOW = 12.9‰) indicate that the Cu–Au skarns formed at 500 ± 50°C by intense Ca–Fe–CO₂–S metasomatism from fluids marked by an igneous isotope signature. The Mt. Shea stock–dike–sill complex postdates the regional D1 folding and metamorphism and the main phase of D2 strike-slip faulting. The suite is calc-akaline and comprises hornblende–plagioclase monzodiorite, quartz monzodiorite, granodiorite, and quartz–plagioclase tonalite porphyry. The intrusions display a wide range in silica content (53–73 wt% SiO₂), in ratio (0.37–0.89), and in ratio (0.02–0.31). Chromium (62–345 ppm), Ni (23–158), Sr (311–1361 ppm), and Ba (250–2,581 ppm) contents are high, Sr/Y ratios are high (24–278, mostly >50), and the rare earth element patterns are fractionated . These features and a negative niobium anomaly relative to the normal mid-ocean ridge basalt indicate that the suite formed by hornblende fractionation from a subduction-related monzodiorite magma sourced from metasomatized peridotite in the upper mantle. The magnesian composition of many intrusions was enhanced due to hornblende crystallization under oxidizing hydrous conditions and during the subsequent destruction of igneous magnetite by subsolidus actinolite–albite alteration. At the Shea prospect, main-stage Cu–Au epidote skarn is cut by biotite–albite–dolomite schist and by red biotite–albite replacement bands. Post-skarn alteration includes 20-m-thick zones of sericite–chlorite–ankerite schist confined to two D3 reverse faults. The schists are mineralized with magnetite + pyrite + chalcopyrite (up to 0.62% Cu, 1.6 g/t Au) and are linked to skarn formation by shared Ca–Fe–CO₂ metasomatism. Red sericitic alteration, marked by magnetite + hematite + pyrite, occurs in fractured porphyry. The biotite/sericite alteration and oxidized ore assemblages at the Shea prospect are mineralogically identical to magnetite–hematite-bearing gold lodes at Kambalda and in the Golden Mile. Published fluid inclusion data suggest that a “high-pressure”, oxidized magmatic fluid (2–9 wt% NaCl equivalent, , 200–400 MPa) was responsible for gold mineralization in structural sites of the Boulder Lefroy and Golden Mile faults. The sericite–alkerite lodes in the Golden Mile share the assemblages pyrite + tennantite + chalcopyrite and bornite + pyrite, and accessory high-sulfidation enargite with late-stage sericitic alteration zones developed above porphyry copper deposits.     

Chemistry of Neutral and Alkaline Waters with Low Al<Superscript>3+</Superscript> Activity Against Hydroxyaluminosilicate HAS<Subscript>B</Subscript> Solubility. The Evidence from Ground and Surface Waters of the Sudetes Mts. (SW Poland)

A wide set of aqueous chemistry data (574 water analyses) from natural environments has been used to testify and validate of the solubility of synthetic hydroxyaluminosilicate (HAS_B)_, Al₂Si₂O₅(OH)₄. The ground and surface waters represent regolith and/or fissure aquifers in various (magmatic, sedimentary and metamorphic) bedrocks in the Sudetes Mts. (SW Poland). The solubility of HAS_B in natural waters was calculated using the method proposed by Schneider et al. (Polyhedron 23:3185–3191, 2004). Results confirm usefulness and validity of this method. The HAS_B solubility obtained from the field data (logK_sp = −44.7 ± 0.58) is lower than it was estimated (logK_sp = −40.6 ± 0.15) experimentally (Schneider et al. Polyhedron 23:3185–3191, 2004). In the waters studied the equilibrium with HAS_B is maintained at pH above 6.7 and at [Al³⁺] ≤ 10⁻¹⁰. Silicon activity (log[H₄SiO₄]) ranges between −4.2 and −3.4. Due to the calculation method used, the K_sp mentioned above cannot be considered as a classical solubility constant. However, it can be used in the interpretation of aluminium solubility in natural waters. The HAS_B has solubility lower than amorphous Al(OH)₃, and higher than proto-imogolite. From water samples that are in equilibrium with respect to HAS_B, the solubility product described by the reaction, is calculated to be logK_sp = 14.0 (±0.7) at 7°C.     

H<Subscript>2</Subscript>O diffusion in peralkaline to peraluminous rhyolitic melts

The diffusion of water in a peralkaline and a peraluminous rhyolitic melt was investigated at temperatures of 714–1,493 K and pressures of 100 and 500 MPa. At temperatures below 923 K dehydration experiments were performed on glasses containing about 2 wt% H₂O _t in cold seal pressure vessels. At high temperatures diffusion couples of water-poor (<0.5 wt% H₂O _t ) and water-rich (~2 wt% H₂O _t ) melts were run in an internally heated gas pressure vessel. Argon was the pressure medium in both cases. Concentration profiles of hydrous species (OH groups and H₂O molecules) were measured along the diffusion direction using near-infrared (NIR) microspectroscopy. The bulk water diffusivity () was derived from profiles of total water () using a modified Boltzmann-Matano method as well as using fittings assuming a functional relationship between and Both methods consistently indicate that is proportional to in this range of water contents for both bulk compositions, in agreement with previous work on metaluminous rhyolite. The water diffusivity in the peraluminous melts agrees very well with data for metaluminous rhyolites implying that an excess of Al₂O₃ with respect to alkalis does not affect water diffusion. On the other hand, water diffusion is faster by roughly a factor of two in the peralkaline melt compared to the metaluminous melt. The following expression for the water diffusivity in the peralkaline rhyolite as a function of temperature and pressure was obtained by least-squares fitting:

The electrical conductivity of upper-mantle rocks: water content in the upper mantle

The electrical conductivity of upper-mantle rocks—dunite, pyroxenite, and lherzolite—was measured at ∼2–3 GPa and ∼1,273–1,573 K using impedance spectra within a frequency range of 0.1–10⁶ Hz. The oxygen fugacity was controlled by a Mo–MoO₂ solid buffer. The results indicate that the electrical conductivity of lherzolite and pyroxenite are approximately half and one order of magnitude higher than that of dunite, respectively. A preliminary model involving water and iron content effects on the electrical conductivity was derived and is summarized by the relation:

The carbon dioxide solubility in alkali basalts: an experimental study

Experiments were conducted to determine CO₂ solubilities in alkali basalts from Vesuvius, Etna and Stromboli volcanoes. The basaltic melts were equilibrated with nearly pure CO₂ at 1,200°C under oxidizing conditions and at pressures ranging from 269 to 2,060 bars. CO₂ solubility was determined by FTIR measurements. The results show that alkalis have a strong effect on the CO₂ solubility and confirm and refine the relationship between the compositional parameter Π devised by Dixon (Am Mineral 82:368–378, 1997) and the CO₂ solubility. A general thermodynamic model for CO₂ solubility in basaltic melts is defined for pressures up to 2 kbars. Based on the assumption that O²⁻ and CO₃²⁻ mix ideally, we have:

Genesis of secondary uranium minerals associated with jasperoid veins,El Erediya area,Eastern Desert,Egypt

Uranium mineralization in the El Erediya area, Egyptian Eastern Desert, has been affected by both high temperature and low temperature fluids. Mineralization is structurally controlled and is associated with jasperoid veins that are hosted by a granitic pluton. This granite exhibits extensive alteration, including silicification, argillization, sericitization, chloritization, carbonatization, and hematization. The primary uranium mineral is pitchblende, whereas uranpyrochlore, uranophane, kasolite, and an unidentified hydrated uranium niobate mineral are the most abundant secondary uranium minerals. Uranpyrochlore and the unidentified hydrated uranium niobate mineral are interpreted as alteration products of petscheckite. The chemical formula of the uranpyrochlore based upon the Electron Probe Micro Analyzer (EPMA) is . It is characterized by a relatively high Zr content (average ZrO₂ = 6.6 wt%). The average composition of the unidentified hydrated uranium niobate mineral is , where U and Nb represent the dominant cations in the U and Nb site, respectively. Uranophane is the dominant U⁶⁺ silicate phase in oxidized zones of the jasperoid veins. Kasolite is less abundant than uranophane and contains major U, Pb, and Si but only minor Ca, Fe, P, and Zr. A two-stage metallogenetic model is proposed for the alteration processes and uranium mineralization at El Erediya. The primary uranium minerals were formed during the first stage of the hydrothermal activity that formed jasperoid veins in El Eradiya granite (130–160 Ma). This stage is related to the Late Jurassic–Early Cretaceous phase of the final Pan-African tectono-thermal event in Egypt. After initial formation of El Erediya jasperoid veins, a late stage of hydrothermal alteration includes argillization, dissolution of iron-bearing sulfide minerals, formation of iron-oxy hydroxides, and corrosion of primary uranium minerals, resulting in enrichment of U, Ca, Pb, Zr, and Si. During this stage, petscheckite was altered to uranpyrochlore and oxy-petscheckite. Uranium was likely transported as uranyl carbonate and uranyl fluoride complexes. With change of temperature and pH, these complexes became unstable and combined with silica, calcium, and lead to form uranophane and kasolite. Finally, at a later stage of low-temperature supergene alteration, oxy-petscheckite was altered to an unidentified hydrated uranium niobate mineral by removal of Fe.     

The activity of silica in kimberlites,revisited

The activity of silica in a silicate liquid in equilibrium with olivine and orthopyroxene decreases with increasing pressure. In contrast, the activity of silica in an unbuffered silicate liquid changes little with pressure. Although the implications of these pressure dependencies have been considered by previous authors in terms of inferring pressures of origin of magmas, less consideration has been given to the implications of these dependencies on the evolution of the magma en route to the surface, or to the mantle through which the magma passes. In this paper, a combination of Schreinemakers’ analysis in isothermal section and calculated reactions in space is used to (a) rationalize the absence of orthopyroxene xenocrysts in kimberlites and the relative abundance of olivine “megacrysts” therein, (b) propose another reason for the paucity of xenocrystic mantle-derived carbonates in kimberlites, (c) explain why clinopyroxene is much less reactive in the kimberlite melt than is orthopyroxene, and (d) explore the implications of the relative stabilities of olivine, orthopyroxene, and clinopyroxene in kimberlitic magma for the mantle through which the magma transits.

---

Daytime deposition and nighttime dissolution of calcium carbonate controlled by submerged plants in a karst spring-fed pool: insights from high time-resolution monitoring of physico-chemistry of water

Water temperature, dissolved oxygen (DO), pH, and specific conductivity (spc) were measured in a time interval of 15 min in a karst spring and the spring-fed pool with flourishing submerged plants in Guilin, SW China under dry weather for periods of 2 days. Measurements allowed calculation of calcium and bicarbonate concentrations ([Ca²⁺] and [HCO₃ ⁻]), and thus CO₂ partial pressure ( ) and saturation index of calcite (SIc). Results show that there were not any diurnal variations in the physico-chemical parameters of the water for the spring. However, during daytime periods, pool water decreased to far less than the spring water in a few hours, pH and SIc increased to greater than the spring, and [Ca²⁺] and [HCO₃ ⁻] decreased to less than the spring. During nighttime periods, pool water returned to or even increased to greater than the spring, pH and SIc decreased to less than the spring, and [Ca²⁺] and [HCO₃ ⁻] increased to greater than the spring. The decrease in [Ca²⁺] and [HCO₃ ⁻] to less than the spring during daytime periods implies daytime deposition of calcium carbonate, while the increase in [Ca²⁺] and [HCO₃ ⁻] to greater than the spring during nighttime periods implies nighttime dissolution of calcium carbonate. The direction of the observed changes depended essentially on the illumination, indicating that daytime photosynthetic and nighttime respiratory activities in the pool aquatic plant ecosystem, which were further evidenced by the increase and decrease in DO during daytime and nighttime periods respectively, were the main processes involved. The large variations of the components of the carbonate system imply considerable changes of the capacities of CO₂ and O₂ in water. The finding has implications for water sampling strategy in slow-flowing karst streams and other similar environments with stagnant water bodies such as estuaries, lakes, reservoirs, and wetlands, where aquatic plant ecosystem may flourish.     

Mechanisms of hydrogen incorporation and diffusion in iron-bearing olivine

The incorporation and diffusion of hydrogen in San Carlos olivine (Fo₉₀) single crystals were studied by performing experiments under hydrothermal conditions. The experiments were carried out either at 1.5 GPa, 1,000°C for 1.5 h in a piston cylinder apparatus or at 0.2 GPa, 900°C for 1 or 20 h in a cold-seal vessel. The oxygen fugacity was buffered using Ni–NiO, and the silica activity was buffered by adding San Carlos orthopyroxene powders. Polarized Fourier transform infrared (FTIR) spectroscopy was utilized to quantify the hydroxyl distributions in the samples after the experiments. The resulting infrared spectra reproduce the features of FTIR spectra that are observed in olivine from common mantle peridotite xenoliths. The hydrogen concentration at the edges of the hydrogenated olivine crystals corresponds to concentration levels calculated from published water solubility laws. Hydrogen diffusivities were determined for the three crystallographic axes from profiles of water content as a function of position. The chemical diffusion coefficients are comparable to those previously reported for natural iron-bearing olivine. At high temperature, hydrogenation is dominated by coupled diffusion of protons and octahedrally coordinated metal vacancies where the vacancy diffusion rate limits the process. From the experimental data, we determined the following diffusion laws (diffusivity in m² s⁻¹, activation energies in kJ mol⁻¹): for diffusion along [100] and [010]; for diffusion along [001]. These diffusion rates are fast enough to modify significantly water contents within olivine grains in xenoliths ascending from the mantle.     

Experimental determination of activities in Fe−Mg olivine at 1400 K

The exchage equilibrium has been used to measure activity-composition relations along the olivine join FeSi_0.5O₂−MgSi_0.5O₂ at 1400 K and 1 atm pressure. Equilibrium Fe−Mg partitioning between the two phases was determined by reversing the compositions of olivine coexisting with oxide and matallic iron over the composition range Fo₂₃ to Fo₉₂. A detailed study of the thermodynamic properties of the oxide phase has recently been made by Srečec et al. and we have confirmed their results in the composition range of interest. Application of the oxide data to the exchange equilibrium enables the properties of olivine to be determined. Within experimental uncertainly (Fe, Mg)Si_0.5O₂ olivine can, at 1400 K, be treated as a symmetric solution with W _Fe-Mg ^o1 of 3.7±0.8 kJ/mol. The data permit the presence of only very slight asymmetry in the series. The data do not support recent assertions that olivine is highly non-ideal (W≈10 kJ/mol) under these conditions.     

R?le du brassage et du stockage magmatique dans l’homogénéisation des granito?des calco-alcalins: Cas du pluton composite de Za?r (Maroc central)

Resume.  Le pluton calco-alcalin de Za?r est composé de trois principaux faciès pétrographiques répartis en deux unités granitiques imbriquées. Ces faciès, de différents degrés d’hybridation et de différenciation, résultent de mélanges magmatiques entre des magmas basiques mantelliques de type ?HAB? (basalte hyperalumineux) et un magma anatectique issu de la fusion partielle de matériaux crustaux (métapélites ou métagrauwackes). La répartition des faciès granitiques de Za?r peut s’expliquer selon un modèle pétrogénétique de type ?MASH? (melting-assimilation-storage-homogenization) où des magmas hybrides seraient formés suivant différentes proportions de mélanges magmatiques acide-basique. Ces magmas auraient subides conditions d’ascension spécifiques et seraient mis en place sous forme de 3 grandes injections successives:

Influence of hydrogen on Fe–Mg interdiffusion in (Mg,Fe)O and implications for Earth’s lower mantle

Interdiffusion of Fe and Mg in (Mg,Fe)O has been investigated experimentally under hydrous conditions. Single crystals of MgO in contact with (Mg_0.73Fe_0.27)O were annealed hydrothermally at 300 MPa between 1,000 and 1,250°C and using a Ni–NiO buffer. After electron microprobe analyses, the dependence of the interdiffusivity on Fe concentration was determined using a Boltzmann–Matano analysis. For a water fugacity of ∼300 MPa, the Fe–Mg interdiffusion coefficient in Fe _x Mg_1−x O with 0.01 ≤ x ≤ 0.25 can be described by with and C = −80 ± 10 kJ mol⁻¹. For x = 0.1 and at 1,000°C, Fe–Mg interdiffusion is a factor of ∼4 faster under hydrous than under anhydrous conditions. This enhanced rate of interdiffusion is attributed to an increased concentration of metal vacancies resulting from the incorporation of hydrogen. Such water-induced enhancement of kinetics may have important implications for the rheological properties of the lower mantle.

How partial melts of mafic lower crust affect ascending magmas at oceanic ridges

We present experiments showing that the lower oceanic crust should melt efficiently and quickly when heated by hot ascending magmas. Average plagioclase–olivine and plagioclase–augite pairs from the lower crust at the Southwest Indian Ridge have melt–mineral saturation boundaries at 1,190 and 1,154°C, respectively, and melt rapidly (>0.01 mm/h) at 50°C or more above these temperatures. Melting experiments performed on olivine–plagioclase and augite–plagioclase mineral pairs from actual oceanic lower crustal rock samples and under conditions applicable to a MOR setting (1,220–1,330°C, 1 atm, quartz–fayalite–magnetite oxygen buffer, 0.25–24 h) indicate that the resulting disequilibrium melts are linear mixes of the mineral compositions. The rates of melting are slower than the rate of heat-diffusion into a sample and are approximated as: