Signatures of slope failures and river‐delta collapses in a perialpine lake (Lake Lucerne,Switzerland)

Historical reports from the 17th Century document two destructive tsunamis with run‐ups exceeding 5 m, affecting proximal basins of Lake Lucerne (Switzerland). One event in ad 1601 is coeval with a strong nearby earthquake (M_W ca 5·9) which caused extensive slope failures in many parts of the lake. The second event in ad 1687 is associated with an apparently spontaneous partial collapse of the Muota river delta. This study combines high‐resolution bathymetry, reflection seismic and lithological data to document the sedimentary and morphological signatures of the two subaqueous mass movements that probably generated the observed tsunamis. Such mass movements are significant as a common sedimentation process and as a natural hazard in fjord‐type lakes and similar environments. The deposits, covering large parts of the basins with thicknesses reaching >10 m, consist of two subunits: A lower ‘massflow deposit’ contains variably deformed sediments from the source areas. Its emplacement affected pre‐existing sediments, incorporating thin sediment slices into the deposit and increasing its volume. Deep‐reaching deformation near basin margins is expressed as bulges on the lake floor. An overlying ‘megaturbidite’, featuring a graded, sandy base and a thick homogeneous muddy part, was deposited from suspended particles. The source area for the ad 1601 event, gently dipping lateral slopes with an unconsolidated hemipelagic sediment cover, hosts a pronounced slide scar with sharp escarpments and sliding surfaces. The source area for the ad 1687 event on an active delta slope has been overprinted by continued sedimentation and does not show an unambiguous scar. The case studies are exemplary for end‐member types of source areas (lateral versus delta slopes) and trigger mechanisms (seismic versus aseismic); they show that morphological mapping and reconstructions of past events are key components of a hazard assessment for mass movement‐generated tsunamis.     

Subaqueous morphology of Lake Lucerne (Central Switzerland): implications for mass movements and glacial history

Bathymetric data available for Swiss lakes have typically only low to moderate resolution and variable quality, making them insufficient for detailed underwater geomorphological studies. This article presents results of a new bathymetric survey in perialpine Lake Lucerne using modern hydrographic equipment. A digital terrain model (DTM) of the lake floor (raster dataset with 1 m cell size) covering the Chrüztrichter and Vitznau basins documents signatures of major Holocene mass movements and relics from the glacial history of the lake. Combining the bathymetry data with reflection seismic profiles and an existing event chronology allows investigating the morphology in its geological context. Subaqueous sediment slide scars with sharp headwalls cover large areas on moderately inclined slopes. The particularly large Weggis slide complex, correlated with an historical earthquake (ad 1601), features a ~9 km long and 4–7 m high headwall and covers an area of several square kilometers. Large debris cones of prehistoric rockfalls and the deposits of recent rockfall events imaged on the almost flat basin plain document mass-movement activity on steep slopes above the lake. Six transverse moraines, visible as subaqueous ridges, as lake-floor lineaments, or only imaged on reflection seismic profiles, indicate a complex glacial-inherited morphology. As many of the documented features result from potentially catastrophic events, high-resolution bathymetry can significantly improve natural hazard assessment for lakeshore communities by extending classical hazard maps to the subaqueous domain.     

Late-glacial and postglacial sedimentation in Lake Superior based on seismic-reflection profiles

Seismic reflection profiles (3.5 kHz) were obtained along more than 3500 km of shiptrack in Lake Superior within the last 2 yr. The acoustic character of profiles is categorized as: (I) a single, strong reflector at the lake floor, (II) a thick, acoustically transparent layer overlying a strong reflector, and (III) relatively thick sediment with internal acoustic reflectors. These profiles, in conjunction with sediment cores from the area, reveal that varved glacial-lacustrine sediment settled out preferentially in a trough between Isle Royale and the north shore, and to a lesser extent in other topographic depressions; bottom currents generated by storm waves prevent clay accumulation on till or bedrock in the open lake wherever the bottom is shallower than 100 m; bottom currents prevent deposition or erode bottom sediment in certain deep-water (> 200 m) valleys; and lacustrine sediment is disturbed by creep or slumping off Grand Portage, Minnesota, and by other processes such as dewatering in many other areas. These factors complicate sedimentation in Lake Superior, and must be considered when investigating any aspect of the lake sediment.     

Late Quaternary mass movement events in Lake El′gygytgyn,North‐eastern Siberia

Lake El′gygytgyn is situated in a 3·6 Myr old impact crater in North‐eastern Siberia. Its sedimentary record probably represents the most complete archive of Pliocene and Quaternary climate change in the terrestrial Arctic. In order to investigate the influence of gravitational sediment transport on the pelagic sediment record in the lake centre, two sediment cores were recovered from the lower western lake slope. The cores penetrate a sub‐recent mass movement deposit that was identified by 3·5 kHz echo sounding. In the proximal part of this deposit, deformed sediments reflect an initial debris flow characterized by limited sediment mixture. Above and in front of the debrite, a wide massive densite indicates a second stage with a liquefied dense flow. The mass movement event led to basal erosion of ca 1 m thick unconsolidated sediments along parts of its flow path. The event produced a suspension cloud, whose deposition led to the formation of a turbidite. The occurrence of the turbidite throughout the lake and the limited erosion at its base mainly suggest deposition by ‘pelagic rain’ following Stokes’ Law. Very similar radiocarbon dates obtained in the sediments directly beneath and above the turbidite in the central lake confirm this interpretation. When applying the depositional model for the Late Quaternary sediment record of Lake El′gygytgyn, the recovered turbidites allow reconstruction of the frequency and temporal distribution of large mass movement events at the lake slopes. In total, 28 turbidites and related deposits were identified in two, 12·9 and 16·6 m long, sediment cores from the central lake area covering approximately 300 kyr.     

Subglacial and subaqueous processes near a glacier grounding line: sedimentological evidence from a former ice-dammed lake, Achnasheen Scotland

Subglacial and subaqueous sediments deposited near the margin of a Late-glacial ice-dammed lake near Achnasheen, northern Scotland, are described and interpreted. The subglacial sediments consist of deformation tills and glacitectonites derived from pre-existing glaciolacustrine deposits, and the subaqueous sediments consist of ice-proximal outwash and sediment flow deposits, and distal turbidites. Sediment was delivered from the glacier to the lake by two main processes: (1) subglacial till deformation, which fed debris flows at the grounding line; and (2) meltwater transport, which fed sediment-gravity flows on prograding outwash fans. Beyond the ice-marginal environment, deposition was from turbidity currents, ice-rafting and settling of suspended sediments. The exposures support the conclusion that the presence of a subglacial deforming layer can exert an important influence on sedimentation at the grounding lines of calving glaciers.     

Seismic‐stratigraphic record of a deglaciation sequence: from the marine Laflamme Gulf to Lake Saint‐Jean (late Quaternary,Québec,Canada)

The stratigraphy of the last deglaciation sequence is investigated in Lake Saint‐Jean (Québec Province, Canada) based on 300 km of echo‐sounder two dimensional seismic profiles. The sedimentary archive of this basin is documented from the Late Pleistocene Laurentidian ice‐front recession to the present‐day situation. Ten seismic units have been identified that reflect spatio‐temporal variations in depositional processes characterizing different periods of the Saint‐Jean basin evolution. During the postglacial marine flooding, a high deposition rate of mud settling, from proglacial glacimarine and then prodeltaic plumes in the Laflamme Gulf, produced an extensive, up to 50 m thick mud sheet draping the isostatically depressed marine basin floor. Subsequently, a closing of the water body due to glacio‐isostatic rebound occurred at 8.5 cal. ka BP, drastically modifying the hydrodynamics. Hyperpycnal flows appeared because fresh lake water replaced dense marine water. River sediments were transferred towards the deeper part of the lake into river‐related sediment drifts and confined lobes. The closing of the water body is also marked by the onset of a wind‐driven internal circulation associating coastal hydrodynamics and bottom currents with sedimentary features including shoreface deposits, sediment drifts and a prograding shelf‐type body. The fingerprints of a forced regression are well expressed by mouth‐bar systems and by the shoreface–shelf system, the latter unexpected in such a lacustrine setting. In both cases, a regressive surface of lacustrine erosion (RSLE) has been identified, separating sandy mouth‐bar from glaciomarine to prodeltaic muds, and sandy shoreface wedges from the heterolithic shelf‐type body, respectively. The Lake Saint‐Jean record is an example of a regressive succession driven by a glacio‐isostatic rebound and showing the transition from late‐glacial to post‐glacial depositional systems.     

Longitudinal transport of turbidity currents—–a model study of Horgen events

Experiments were carried out in a 10 × 6 m basin to simulate turbidity currents generated by the Horgen Slumping Events of 1875. The conditions for kinematic similarity were satisfied and the experiments gave further insight into the mechanics of transport triggered by the Horgen slumps. The experimental turbidity currents laid down thick deposits on a subaqueous fan, and thin sheets of turbidite on the floor of the elongate basin through longitudinal transport, comparable with the simulated deposits in Lake Zurich. It is concluded that longitudinal transport is a general phenomenon of turbidity currents.     

The prehistory and palaeogeography of the great Indian desert : Bridget Allchin, Andrew Goudie, and Karunakara Hegde. Academic Press, London/New York/San Francisco, 1978, 370 pp., 73 figs., 85 tables, 12 plates. Bibliography, Index, £25/-, U.S. $48.90

Seismic reflection profiles (3.5 kHz) were obtained along more than 3500 km of shiptrack in Lake Superior within the last 2 yr. The acoustic character of profiles is categorized as: (I) a single, strong reflector at the lake floor, (II) a thick, acoustically transparent layer overlying a strong reflector, and (III) relatively thick sediment with internal acoustic reflectors. These profiles, in conjunction with sediment cores from the area, reveal that varved glacial-lacustrine sediment settled out preferentially in a trough between Isle Royale and the north shore, and to a lesser extent in other topographic depressions; bottom currents generated by storm waves prevent clay accumulation on till or bedrock in the open lake wherever the bottom is shallower than 100 m; bottom currents prevent deposition or erode bottom sediment in certain deep-water (> 200 m) valleys; and lacustrine sediment is disturbed by creep or slumping off Grand Portage, Minnesota, and by other processes such as dewatering in many other areas. These factors complicate sedimentation in Lake Superior, and must be considered when investigating any aspect of the lake sediment.     

Facies characteristics of Middle Pleistocene (Saalian) ice-margin subaqueous fan and delta deposits,glacial Lake Leine,NW Germany

The blocking of major river valleys in the Leinebergland area by the Early Saalian Scandinavian ice sheet led to the formation of a large glacial lake, referred to as “glacial Lake Leine”, where most of the sediment was deposited by meltwater. At the initial stage, the level of glacial Lake Leine was approx. 110 m a.s.l. The lake level then rose by as much as 100 m to a highstand of approx. 200 m a.s.l.Two genetically distinct ice-margin depositional systems are described that formed on the northern margin of glacial Lake Leine in front of the retreating Scandinavian ice sheet. The Bornhausen delta is up to 15 m thick and characterized by a large-scale tangential geometry with dip angles from 10°–28°, reflecting high-angle foreset deposition on a steep delta slope. Foreset beds consist of massive clast-supported gravel and pebbly sand, alternating with planar-parallel stratified pebbly sand, deposited from cohesionless debris flows, sandy debris flows and high-density turbidity flows. The finer-grained sandy material moved further downslope where it was deposited from low-density turbidity currents to form massive or ripple-cross-laminated sand in the toeset area.The Freden ice-margin depositional system shows a more complex architecture, characterized by two laterally stacked sediment bodies. The lower part of the section records deposition on a subaqueous ice-contact fan. The upper part of the Freden section is interpreted to represent delta-slope deposits. Beds display low- to high-angle bedding (3°–30°) and consist of planar and trough cross-stratified pebbly sand and climbing-ripple cross-laminated sand. The supply of meltwater-transported sediment to the delta slope was from steady seasonal flows. During higher energy conditions, 2-D and 3-D dunes formed, migrating downslope and passing into ripples. During lower-energy flow conditions thick climbing-ripple cross-laminated sand beds accumulated also on higher parts of the delta slope.     

Sedimentological and deformational criteria for discriminating subglaciofluvial deposits from subaqueous ice‐contact fan deposits: A Pleistocene example (Ireland)

A pit located near Ballyhorsey, 28 km south of Dublin (eastern Ireland), displays subglacially deposited glaciofluvial sediments passing upwards into proglacial subaqueous ice‐contact fan deposits. The coexistence of these two different depositional environments at the same location will help with differentiation between two very similar and easily confused glacial lithofacies. The lowermost sediments show aggrading subglacial deposits indicating a constrained accommodation space, mainly controlled by the position of an overlying ice roof during ice‐bed decoupling. These sediments are characterized by vertically stacked tills with large lenses of tabular to channelized sorted sediments. The sorted sediments consist of fine‐grained laminated facies, cross‐laminated sand and channelized gravels, and are interpreted as subglaciofluvial sediments deposited within a subglacial de‐coupled space. The subglaciofluvial sequence is characterized by glaciotectonic deformation structures within discrete beds, triggered by fluid overpressure and shear stress during episodes of ice/bed recoupling (clastic dykes and folds). The upper deposits correspond to the deposition of successive hyperpycnal flows in a proximal proglacial lake, forming a thick sedimentary wedge erosively overlying the subglacial deposits. Gravel facies and large‐scale trough bedding sand are observed within this proximal wedge, while normally graded sand beds with developed bedforms are observed further downflow. The building of the prograding ice‐contact subaqueous fan implies an unrestricted accommodation space and is associated with deformation structures related to gravity destabilization during fan spreading (normal faults). This study facilitates the recognition of subglacial/submarginal depositional environments formed, in part, during localized ice/bed coupling episodes in the sedimentary record. The sedimentary sequence exposed in Ballyhorsey permits characterization of the temporal framework of meltwater production during deglaciation, the impact on the subglacial drainage system and the consequences on the Irish Sea Ice Stream flow mechanisms.     

Coarse-grained sediment gravity flow facies in a large supraglacial lake

Near Williams Lake, in the central interior of British Columbia, the Fraser River exposes long sections of late Pleistocene glaciolacustrine sediments selectively preserved within a bedrock trough. The dominant facies types are thick, normally graded gravels and sands that occupy steeply dipping multistorey channels up to 300 m wide and several tens of metres deep. Channels appear to have been simultaneously cut and filled by high density turbidity currents in a glacial lake floored by stagnant ice. Fining upward sediment gravity flow sequences up to 50 m thick may be the product of quasi-continuous ‘surging’ turbidity flows triggered by catastrophic meltwater discharges into the trough or retrogressive failure of ice-cored sediments. Large-scale post-depositional deformation structures, such as synclinal folds, normal faults, sedimentary dyke swarms and dewatering structures, record gravitational foundering of sediment and pore-water expulsion caused by the melt of underlying glacier ice. Melting of buried ice masses along the floor of the trough appears to have controlled the flow paths of turbidity currents by producing sub-basins within the overlying sediment pile. An idealized model of ‘supraglacial’ lacustrine sedimentation is developed that may be applicable to other glaciated areas with similar bedrock topography.     

The sedimentary record of drifting ice (early Wisconsin Sunnybrook deposit) in an ancestral ice-dammed Lake Ontario, Canada

Outcrops of pebbly mud (diamict) at Scarborough in Southern Ontario, Canada (the so-called Sunnybrook ‘Till’) are associated with the earliest incursion of the Laurentide Ice Sheet (LIS) into mid-continent North America some 45,000 years ago. The Sunnybrook is a blanket-like deposit containing deepwater ostracodes and occurs conformably within a thick (100 m) succession of deltaic and glaciolacustrine facies that record water depth changes in a large proglacial lake. Contextual evidence (associated facies, sedimentary structures, deposit geometry and landforms) indicates a low energy depositional setting in an ice-dammed ancestral Lake Ontario in which scouring by floating ice masses was an important process. U-shaped, iceberg-cut scours (with lateral berms) up to 7 m deep, occur on the upper surface of the Sunnybrook and are underlain by ‘sub-scour’ structures that extend several meters below the scour base. Ice-rafted concentrations of clasts (‘clast layers’), grooved surfaces formed by floating ice glissading over a muddy lake floor (‘soft sediment striations’) and melanges of sand and mud mixed by grounding ice keels (‘ice keel turbates’) are present and are all well known from modern cold environments. The wider significance of this depositional model is that the LIS margin lay east of Scarborough and did not overrun Southern Ontario. This finding is in agreement with recent data from the Erie Basin of Canada, Ohio, and Indiana where deposits formerly correlated with the Sunnybrook (and thus implying an extensive early Wisconsin ice sheet) are now regarded as Illinoian. A speculative hypothesis is proposed that relates deposition of the Sunnybrook and two younger deposits of similar sedimentology, to surge-like instabilities of the southern LIS margin.     

Facies and cyclicity of the Late Permian Bainmedart Coal Measures in the Northern Prince Charles Mountains, MacRobertson Land, Antarctica

The Late Permian Bainmedart Coal Measures form part of the Permo-Triassic Amery Group, which crops out in the Beaver Lake area of the Northern Prince Charles Mountains, MacRobertson Land, Antarctica. The exposed strata are believed to have formed in graben or half-graben sub-basins on the western edge of the Lambert Graben, a major failed rift system. Sedimentological analysis has revealed that these rocks formed in alluvial environments in which swiftly flowing rivers of low sinuosity (represented by Facies A1 and A2) flowed northward down the axis of the basin, and were associated with waterlogged floodbasin and peat-forming wetlands (Facies B1-B4). A third Facies Association (comprising Facies C1-C3), interpreted as the deposits of lake floor and delta environments, is exclusively developed within a distinctive, fine-grained interval here named the Dragon's Teeth Member. The proportion of Association B facies within the succession increases markedly above the level of the Dragon's Teeth Member (at about 300 m above the base of the formation). Flat, low-angle and undulatory bedding structures preserved within channel deposits are suggestive of sediment deposition in flow conditions which were often critical or supercritical. Presence of massive and chaotic intervals of sandstone further implies some deposition from high-concentration aqueous flows. Alluvial channel bodies show evidence of incision into underlying substrates, both during initiation and at later stages in channel belt construction. The lack of interfingering between channel deposits and coals suggests that thick peats formed only in areas and at times of minimal clastic sediment supply. Analysis of well-developed cyclicity within the coal measures suggests that the dominant control on sequence architecture was climatic, related to precessional Milankovitch fluctuations of c. 19-kyr periodicity. Cycles began abruptly with the deposition of coarse-grained material in high-energy alluvial channels, which contracted with time in response to changes in water supply (rainfall). Upper parts of cycles are dominated by finer-grained sediments and then coal, indicative of progressively reduced coarse sediment input. Tectonic processes overprinted this pattern at least once during the period of sediment accumulation, to form the Dragon's Teeth Member.     

Sedimentology of a lacustrine fan-delta system, Miocene Horse Camp Formation, Nevada, USA

A 1600-m-thick succession of the Miocene Horse Camp Formation (Member 2) exposed in east-central Nevada records predominantly terrigenous clastic deposition in subaerial and subaqueous fan-delta environments and nearshore and offshore lacustrine environments. These four depositional environments are distinguished by particular associations of individual facies (14 defined facies). Subaerial and subaqueous fan-delta facies associations include: ungraded, matrix-and clast-supported conglomerate; normally graded, matrix- and clast-supported conglomerate; ungraded and normally graded sandstone; and massive to poorly laminated mudstone. Subaqueous fan-delta deposits typically have dewatering structures, distorted bedding and interbedded mudstone. The subaerial fan-delta environment was characterized by debris flows, hyperconcentrated flows and minor sheetfloods; the subaqueous fan-delta environment by debris flows, high- and low-density turbidity currents, and suspension fallout. The nearshore lacustrine facies association provides examples of deposits and processes rarely documented in lacustrine environments. High-energy oscillatory wave currents, probably related to a large fetch, reworked grains as large as 2 cm into horizontally stratified sand and gravel. Offshore-directed currents produced uncommonly large (typically 1–2 m thick) trough cross-stratified sandstone. In addition, stromatolitic carbonate interbedded with stratified coarse sandstone and conglomerate suggests a dynamic environment characterized by episodic terrigenous clastic deposition under high-energy conditions alternating with periods of carbonate precipitation under reduced energy conditions. Massive and normally graded sandstone and massive to poorly laminated mudstone characterize the offshore lacustrine facies association and record deposition by turbidity currents and suspension fallout. A depositional model constructed for the Horse Camp Formation (Member 2) precludes the existence of all four depositional environments at any particular time. Rather, phases characterized by deposition in subaerial fan, nearshore lacustrine and offshore lacustrine environments alternated with phases of subaerial fan-delta, subaqueous fan-delta and offshore lacustrine deposition. This model suggests that high-energy nearshore currents due to deep water along the lake margin reworked sediment of the fan edge, thus preventing development of a subaqueous fan-delta environment and promoting development of a well-defined nearshore lacustrine environment. Low-energy nearshore currents induced by shallow water along the     

Alluvial, eolian and lacustrine sedimentology of a Paleoproterozoic half-graben, Baker Lake Basin, Nunavut, Canada

The northeast-trending Baker Lake sub-basin was a volcanically active, half-graben during deposition of ca. 1.85–1.76 Ga Baker Lake Group. Drainage was oriented along transverse and axial directions with flow to playa lake and deeper perennial lacustrine depocentres. Basin marginal, streamflow-dominated alluvial fans were concentrated along the southern margin, and provided sediment from Archean crystalline basement rocks. These fed transverse gravel- and sand-bed braided streams. Alluvial dynamics were characterized by channel aggradation and abandonment. Abandoned channel belts were sites of floodplain and eolian deposition. Basin axial braided streams fed northeast and southwest to a depocentre near Christopher Island, where eolian, playa and lacustrine environments were intimately linked. Felsic minette flows were initially erupted from localized centres; contemporaneous sedimentary deposits typically contain minor volcaniclastic components that increase in abundance basinward. Voluminous and widespread younger minette flows prograded outward from volcanic centres contributing significant additional basin-infill.     

The Pleistocene glaciolacustrine sediments in the Bełchatów mine (central Poland): Endogenic and exogenic controls

The Quaternary overburden of Bełchatów outcrop contains five glaciolacustrine units. The three most widespread are presented. They originated during the advance of the Sanian (= Elsterian), Odranian (= Drenthian) and Wartanian (= Warthian) ice sheets. The following lake environments are distinguished: lake-bottom plain, tectonically active subaqueous slope, subaqueous fan, terminoglacial subaqueous fan and prodelta fan. The lakes formed under changing conditions; the most significant tectonic activity of the graben took place during the Odranian and the lake deposits from this glaciation represent terminoglacial conditions. The Wartanian lake deposits are the only ones that show a shallow-water facies that has not been eroded, because it has not been overridden by an ice sheet.Sedimentation conditions changed during the succeeding glaciations. Endogenic factors affecting sedimentation (i.e. tectonic activity of the graben) complemented some exogenic controls, such as the distance from the ice sheet, the thermal conditions of the lake, and the type of sediment supply. Tectonics changed the style of deposition so much that the lakes, although situated in a lowland area, displayed characteristics of deep valleys.     

Late Quaternary sequence stratigraphy of Lake Malawi (Nyasa), Africa

High resolution seismic data, multichannel seismic data and sediment cores were used to examine the Songwe Sequence, the uppermost of four depositional sequences identifiable on multichannel seismic data from Lake Malawi (Nyasa). The sequence has a maximum thickness of about 115 m in two areas of the lake, but is typically less than 70 m thick over most of the basin. The sequence is distributed along the entire length of the 560 km long lake, and is concentrated in three main depocentres. ¹⁴C age dates from sediment piston cores are extrapolated to provide an age estimate of about 78 000 yr bp for the oldest sediments within the Songwe Sequence. In the North and Central bathymetric basins of the lake, high resolution seismic data indicate a dynamic depositional environment, dominated by turbidity and mass flow deposits. Seismic data from the southern basin show acoustically transparent sediments with relatively low amplitude internal reflections, indicative of pelagic and hemipelagic sedimentation. In many areas the Songwe Sequence is underlain by a pronounced angular unconformity, suggestive of a significant, prolonged, low lake stage prior to deposition of the sequence. Seismic reflectors within the Songwe Sequence can be correlated to younger low lake stages identified from sediment core data. Major late Quaternary low lake level stages in Lake Malawi, interpreted from features identified in the seismic data and sediment core analyses, are tentatively interpreted at 6000 to 10 000 yr bp , 28 000 to >40 000 yr bp , and prior to 78 000 yr bp . Budget calculations indicate mean sediment concentrations from catchment runoff during the period of deposition of the Songwe Sequence to be about 190 mg 1⁻¹, comparable to estimates of modern rainy season discharges from the major river systems. Erosion rates within the drainage basin are estimated to be higher than the African average by a factor of three or more, probably due to the high relief within the Lake Malawi catchment.     

Late Quaternary depositional history of the Reuss delta,Switzerland: constraints from high‐resolution seismic reflection and georadar surveys

Glacial erosion has caused overdeepening of many alpine valleys. After retreat of the ice, they were filled with heterogeneous deposits of glacial, lacustrine and fluvial sediments. A typical example of such a valley segment and its infill is the Reuss delta on the southern shore of Lake Lucerne in Switzerland. To obtain a detailed three‐dimensional image of this valley segment, the ETH Institute of Geophysics has acquired several two‐dimensional, high‐resolution seismic and georadar profiles, and conducted a three‐dimensional georadar survey. Interpretations of these geophysical data were constrained by a geological core extracted from a borehole 300 m deep near the investigation site. The seismic profiles imaged ca. 600 m of sediment infill above bedrock. Based on their reflection characteristics, five different deposition units were distinguished. These units were interpreted as a succession of clay/silt at the base, followed by different sand units with variable but generally increasing amounts of gravel. This succession represented a prograding delta that filled the southern part of Lake Lucerne. The latest fluvial development of the region is best represented by the georadar data. In particular, the three‐dimensional georadar data set provides a detailed view of an ancient braided river channel Copyright © 2002 John Wiley & Sons, Ltd.