Spatial characterization of catchment dispersion mechanisms in an urban context

Previous studies have examined in-depth the dispersion mechanisms in natural catchments. In contrast, these dispersion mechanisms have been studied little in urban catchments, where artificial transport elements and morphological arrangements are expected to modify travel times and mobilize excess rainfall from spatially distributed impervious sites. This has the ability to modify the variance of the catchment’s travel times and hence the total dispersion. This work quantifies the dispersion mechanisms in an urban catchment using the theory of transport by travel times as represented by the Urban Morpho-climatic Instantaneous Unit Hydrograph (U-McIUH) model. The U-McIUH computes travel times based on kinematic wave theory and accounts explicitly for the path heterogeneities and altered connectivity patterns characteristic of an urban drainage network. The analysis is illustrated using the Aubinière urban catchment in France as a case study. We found that kinematic dispersion is dominant for small rainfall intensities, whereas geomorphologic dispersion becomes more dominant for larger intensities. The total dispersion scales with the drainage area in a power law fashion. The kinematic dispersion is dominant across spatial scales up to a threshold of approximately 2–3 km², after which the geomorphologic dispersion becomes more dominant. Overall, overland flow is responsible for most of the dispersion in the catchment, while conduits tend to counteract the increase of the geomorphologic dispersion with a negative kinematic dispersion. Further study with other catchments is needed to asses if the latter is a general feature of urban drainage networks.     

Seasonality and magnitude of floods in Switzerland under future climate change

The flood seasonality of catchments in Switzerland is likely to change under climate change because of anticipated alterations of precipitation as well as snow accumulation and melt. Information on this change is crucial for flood protection policies, for example, or regional flood frequency analysis. We analysed projected changes in mean annual and maximum floods of a 22‐year period for 189 catchments in Switzerland and two scenario periods in the 21st century based on an ensemble of climate scenarios. The flood seasonality was analysed with directional statistics that allow assessing both changes in the mean date a flood occurs as well as changes in the strength of the seasonality. We found that the simulated change in flood seasonality is a function of the change in flow regime type. If snow accumulation and melt is important in a catchment during the control period, then the anticipated change in flood seasonality is most pronounced. Decreasing summer precipitation in the scenarios additionally affects the flood seasonality (mean date of flood occurrence) and leads to a decreasing strength of seasonality, that is a higher temporal variability in most cases. The magnitudes of mean annual floods and more clearly of maximum floods (in a 22‐year period) are expected to increase in the future because of changes in flood‐generating processes and scaled extreme precipitation. Southern alpine catchments show a different signal, though: the simulated mean annual floods decrease in the far future, that is at the end of the 21st century. Copyright © 2013 John Wiley & Sons, Ltd.     

Flood-type trend analysis for alpine catchments

ABSTRACT

In many places, magnitudes and frequencies of floods are expected to increase due to climate change. To understand these changes better, trend analyses of historical data are helpful. However, traditional trend analyses do not address issues related to shifts in the relative contributions of rainfall versus snowmelt floods, or in the frequency of a particular flood type. We present a novel approach for quantifying such trends in time series of floods using a fuzzy decision tree for event classification and applied it to maximal annual and seasonal floods in 27 alpine catchments for the period 1980–2014. Trends in flood types were studied with Sen’s slope and double mass curves. Our results reveal a decreasing number of rain-on-snow and an increasing number of short rainfall events in all catchments, with flash floods increasing in smaller catchments. Overall, the results demonstrate the value of incorporating a fuzzy flood-type classification into flood trend analyses.     

Rainfall–runoff modelling of ephemeral streams in the Valencia region (eastern Spain)

This paper presents preliminary results from the application of a transfer‐function rainfall–runoff model to ephemeral streams in Mediterranean Spain. Flow simulations have been conducted for two small catchments (Carraixet and Poyo basins), located in close proximity to one another yet with significantly different geological characteristics. Analysis of flow simulations for a number of high‐flow events has revealed the dominant influence of the rainfall on the catchment response, particularly for high‐rainfall events. Particular success has been attained modelling the highest magnitude events in both catchments and for all events in the faster responding (Poyo) catchment. In order to investigate the viability of the model for forecasting floods in ungauged catchments, additional investigations have been conducted by calibrating the model for one catchment (donor catchment) and then applying it to another (receptor catchment). The results indicate that this can be successful when either the donor catchment is a fast response catchment or when the model is calibrated using a high‐magnitude event in the donor catchment, providing that the modelled receptor catchment event is of a lower magnitude. Copyright © 2002 John Wiley & Sons, Ltd.     

Dependence between flood peaks and volumes: a case study on climate and hydrological controls

Abstract

The aim of this paper is to understand the causal factors controlling the relationship between flood peaks and volumes in a regional context. A case study is performed based on 330 catchments in Austria ranging from 6 to 500 km² in size. Maximum annual flood discharges are compared with the associated flood volumes, and the consistency of the peak–volume relationship is quantified by the Spearman rank correlation coefficient. The results indicate that climate-related factors are more important than catchment-related factors in controlling the consistency. Spearman rank correlation coefficients typically range from about 0.2 in the high alpine catchments to about 0.8 in the lowlands. The weak dependence in the high alpine catchments is due to the mix of flood types, including long-duration snowmelt, synoptic floods and flash floods. In the lowlands, the flood durations vary less in a given catchment which is related to the filtering of the distribution of all storms by the catchment response time to produce the distribution of flood producing storms.

Editor Z.W. Kundzewicz     

LANDFORM MORPHOLOGIC RELATIONS BETWEEN INTER-GULLIED AND GULLIED LAND AREAS--A CASE STUDY OF THE WANGJIAGOU WATERSHED IN THE WEST OF SHANXI PROVINCE

Previous studies on erosional relations between inter-gullied and gullied lands have mainly concentrated on exploration of water and sediment relations, with few quantitative studies of evolution relations between inter-gullied land and gullied landform erosion in small catchments. This paper, using information from a 1:5000 digital orthophotomap (DOM), digital elevation model(DEM), and topographic map of the same period and of the same scale, quantitatively analyzes the impact and interactions of inter-gullied and gullied land geomorphologic characteristics on the dissected extent of a catchment using orthogonal polynomial regression analysis. Results indicate that gullies play a leading role in the catchment morphologic evolution and extent of cracked ground surface. When inter-gullied land areas are the same, a 0. 1 km2 gullied land area has the maximum effect on the erosive evolution intensity of the catchment cracked degree. The smaller the catchment area is, the greater the extent of cracked ground surface and gully intensity would be. The geomorphologic evolution mechanism of gullied catchments can be explained as a function of geomorphologic indicators of inter-gullied and gullied land characteristics.     

Testing the applicability of a kinematic wave-based distributed hydrological model in two climatically contrasting catchments

Abstract

Steep mountainous areas account for 70% of all river catchments in Japan. To predict river discharge for the mountainous catchments, many studies have applied distributed hydrological models based on a kinematic wave approximation with surface and subsurface flow components (DHM-KWSS). These models reproduce observed river discharge of catchments in Japan well; however, the applicability of a DHM-KWSS to catchments with different geographical and climatic conditions has not been sufficiently examined. This research applied a DHM-KWSS to two river basins that have different climatic conditions from basins in Japan to examine the transferability of the DHM-KWSS model structure. Our results show that the DHM-KWSS model structure explained flow regimes for a wet river basin as well as a large flood event in an arid basin; however, it was unable to explain long-term flow regimes for the arid basin case study.     

LANDFORM MORPHOLOGIC RELATIONS BETWEEN INTER-GULLIED AND GULLIED LAND AREAS —A CASE STUDY OF THE WANGJIAGOU WATERSHED IN THE WEST OF SHANXI PROVINCE

1 INTRODUCTION In the past years, because of a lack of modern techniques, the research on gullied/inter-gullied land erosion mainly depended on field monitoring, such as utilizing marking posts and/or topographic maps to investigate gullied/inter-gullied …     

DEM-based numerical modelling of runoff and soil erosion processes in the hilly–gully loess regions

For sake of improving our current understanding on soil erosion processes in the hilly–gully loess regions of the middle Yellow River basin in China, a digital elevation model (DEM)-based runoff and sediment processes simulating model was developed. Infiltration excess runoff theory was used to describe the runoff generation process while a kinematic wave equation was solved using the finite-difference technique to simulate concentration processes on hillslopes. The soil erosion processes were modelled using the particular characteristics of loess slope, gully slope, and groove to characterize the unique features of steep hillslopes and a large variety of gullies based on a number of experiments. The constructed model was calibrated and verified in the Chabagou catchment, located in the middle Yellow River of China and dominated by an extreme soil-erosion rate. Moreover, spatio-temporal characterization of the soil erosion processes in small catchments and in-depth analysis between discharge and sediment concentration for the hyper-concentrated flows were addressed in detail. Thereafter, the calibrated model was applied to the Xingzihe catchment, which is dominated by similar soil erosion processes in the Yellow River basin. Results indicate that the model is capable of simulating runoff and soil erosion processes in such hilly–gully loess regions. The developed model are expected to contribute to further understanding of runoff generation and soil erosion processes in small catchments characterized by steep hillslopes, a large variety of gullies, and hyper-concentrated flow, and will be beneficial to water and soil conservation planning and management for catchments dealing with serious water and soil loss in the Loess Plateau.     

The geomorphological effectiveness of floods—a contribution stimulated by two recent events in mid-wales

The occurrence of two ‘rare’ floods (August 1973, August 1977) in the Plynlimon experimental catchments has confirmed the susceptibility of small upland catchments to summer flooding and provided clues to complications in the geomorphological interpretation of floods in terms of their magnitude and frequency. Magnitude may be treated both in terms of work and effectiveness; the emphasis here is on effectiveness, as revealed by simple surveys. The first Plynlimon flood was more effective on slopes and the second in channels, despite peak discharges of similar return periods and almost identical rates of work revealed by bedload trapping. Effectiveness/frequency studies are likely to require a much more detailed approach, subdividing both the characteristics of the flood and the spatial elements of the affected catchments; a simple slope/channel subdivision is found to be suitable for accounts of effectiveness found in the literature on British floods this century. Effectiveness studies also require regular surveys throughout the recovery period following major flooding; in upland catchments these surveys should concentrate on identifying threshold phenomena and illustrating the relationship between effectiveness and work assessments of magnitude.     

Assessing the influence of the Merzbacher Lake outburst floods on discharge using the hydrological model SWIM in the Aksu headwaters,Kyrgyzstan/NW China

Glacial lake outburst floods (GLOF) often have a significant impact on downstream users. Including their effects in hydrological models, identifying past occurrences and assessing their potential impacts are challenges for hydrologists working in mountainous catchments. The regularly outbursting Merzbacher Lake is located in the headwaters of the Aksu River, the most important source of water discharge to the Tarim River, northwest China. Modelling its water resources and the evaluation of potential climate change impacts on river discharge are indispensable for projecting future water availability for the intensively cultivated river oases downstream of the Merzbacher Lake and along the Tarim River. The semi‐distributed hydrological model SWIM was calibrated to the outlet station Xiehela on the Kumarik River, by discharge the largest tributary to the Aksu River. The glacial lake outburst floods add to the difficulties of modelling this high‐mountain, heavily glaciated catchment with poor data coverage and quality. The aims of the study are to investigate the glacier lake outburst floods using a modelling tool. Results include a two‐step model calibration of the Kumarik catchment, an approach for the identification of the outburst floods using the measured gauge data and the modelling results and estimations of the outburst flood volumes. Results show that a catchment model can inform GLOF investigations by providing ‘normal’ (i.e. without the outburst floods) catchment discharge. The comparison of the simulated and observed discharge proves the occurrence of GLOFs and highlights the influences of the GLOFs on the downstream water balance. © 2013 The Authors. Hydrological Processes Published by John Wiley & Sons Ltd.     

Catchment water storage variation with elevation

One of the most important functions of catchments is the storage of water. Catchment storage buffers meteorological extremes and interannual streamflow variability, controls the partitioning between evaporation and runoff, and influences transit times of water. Hydrogeological data to estimate storage are usually scarce and seldom available for a larger set of catchments. This study focused on storage in prealpine and alpine catchments, using a set of 21 Swiss catchments comprising different elevation ranges. Catchment storage comparisons depend on storage definitions. This study defines different types of storage including definitions of dynamic and mobile catchment storage. We then estimated dynamic storage using four methods, water balance analysis, streamflow recession analysis, calibration of a bucket‐type hydrological model Hydrologiska Byråns Vattenbalansavdelning model (HBV), and calibration of a transfer function hydrograph separation model using stable isotope observations. The HBV model allowed quantifying the contributions of snow, soil and groundwater storages compared to the dynamic catchment storage. With the transfer function hydrograph separation model both dynamic and mobile storage was estimated. Dynamic storage of one catchment estimated by the four methods differed up to one order of magnitude. Nevertheless, the storage estimates ranked similarly among the 21 catchments. The largest dynamic and mobile storage estimates were found in high‐elevation catchments. Besides snow, groundwater contributed considerably to this larger storage. Generally, we found that with increasing elevation the relative contribution to the dynamic catchment storage increased for snow, decreased for soil, but remained similar for groundwater storage.     

Spatial and temporal variability of flood seasonality in Wales

High‐magnitude floods across Europe within the last decade have resulted in the widespread reassessment of flood risk; this coupled with the introduction of the Water Framework Directive (2000) has increased the need for a detailed understanding of seasonal variability in flood magnitude and frequency. Mean day of flood (MDF) and flood seasonality were calculated for Wales using 30 years of gauged river‐flow records (1973–2002). Noticeable regional variations in timing and length of flood season are evident, with flooding occurring earlier in small catchments draining higher elevations in north and mid‐west Wales. Low‐altitude regions in West Wales exposed to westerly winds experience flooding during October–January, while large eastern draining catchments experience later flooding (January–February). In the northeast and mid‐east regions December–January months experience the greatest number of floods, while the southeast has a slightly longer flood season (December–February), with a noticeable increase in January floods. Patterns obtained from MDF data demonstrate their effectiveness and use in analysing regional patterns in flood seasonality, but catchment‐specific determinants, e.g. catchment wetness, size and precipitation regime are important factors in flood seasonality. Relatively strong correlations between precipitation and flood activity are evident in Wales, with a poorer relationship between flooding and weather types and the North Atlantic Oscillation (NAO). Copyright © 2010 John Wiley & Sons, Ltd.     

A generalised one-dimensional kinematic catchment model

A numerical model has been developed for the solution of the kinematic wave equation for a one-dimensional catchment, using the Lax-Wendroff technique. The model has been verified by comparing its solutions with some analytical solutions already available. Certain catchment parameters have been identified and the model applied with promising results to two actual catchments to ascertain their values.     

INFLUENCE OF THE DRAINAGE NETWORK IDENTIFICATION METHOD ON GEOMORPHOLOGICAL PROPERTIES AND HYDROLOGICAL RESPONSE

The influence of the method of identification of the drainage network on its geomorphological characteristics and on its hydrological response is analysed. Blue lines, photo-interpreted networks and networks generated from digital elevation models (DEMs) by an automatic algorithm are compared with field observations for two small alpine catchments. The comparisons are carried out in quantitative terms by using several geomorphological indices and functions and by calculating the hydrological response of the networks as represented by their geomorphologic instantaneous unit hydrograph (GIUH). The results show that the effect of the identification method on the geomorphological indices and on the hydrological response is significant, and that the threshold area for channel initiation is not constant. Moreover, the available data show a poor correlation between local slope and threshold area. Finally, the influence of the threshold area on the shape of the GIUH is larger when the residence time on the hillslopes is of the same order as the residence time in the network. In the opposite case, the variability of the flow velocity along the network seems to play an important role. © 1997 John Wiley & Sons, Ltd.     

Coupling the Xinanjiang model to a kinematic flow model based on digital drainage networks for flood forecasting

The Xinanjiang model, which is a conceptual rainfall‐runoff model and has been successfully and widely applied in humid and semi‐humid regions in China, is coupled by the physically based kinematic wave method based on a digital drainage network. The kinematic wave Xinanjiang model (KWXAJ) uses topography and land use data to simulate runoff and overland flow routing. For the modelling, the catchment is subdivided into numerous hillslopes and consists of a raster grid of flow vectors that define the water flow directions. The Xinanjiang model simulates the runoff yield in each grid cell, and the kinematic wave approach is then applied to a ranked raster network. The grid‐based rainfall‐runoff model was applied to simulate basin‐scale water discharge from an 805‐km² catchment of the Huaihe River, China. Rainfall and discharge records were available for the years 1984, 1985, 1987, 1998 and 1999. Eight flood events were used to calibrate the model's parameters and three other flood events were used to validate the grid‐based rainfall‐runoff model. A Manning's roughness via a linear flood depth relationship was suggested in this paper for improving flood forecasting. The calibration and validation results show that this model works well. A sensitivity analysis was further performed to evaluate the variation of topography (hillslopes) and land use parameters on catchment discharge. Copyright © 2009 John Wiley & Sons, Ltd.     

On the relationship between hydrographs and chemographs

The spatial representativeness of gauging stations was investigated in two low‐mountainous river basins near the city of Trier, southwest Germany. Longitudinal profiles during low and high flow conditions were sampled in order to identify sources of solutes and to characterize the alteration of flood wave properties during its travel downstream. Numerous hydrographs and chemographs of natural flood events were analysed in detail. Additionally, artificial flood events were investigated to study in‐channel transport processes. During dry weather conditions the gauging station was only representative for a short river segment upstream, owing to discharge and solute concentrations of sources contiguous to the measurement site. During artificial flood events the kinematic wave velocity was considerably faster than the movement of water body and solutes, refuting the idea of a simple mixing process of individual runoff components. Depending on hydrological boundary conditions, the wave at a specific gauge could be entirely composed of old in‐channel water, which notably reduces the spatial representativeness of a sampling site. Natural flood events were characterized by a superimposition of local overland flow, riparian water and the kinematic wave process comprising the downstream conveyance of solutes. Summer floods in particular were marked by a chronological occurrence of distinct individual runoff components originating only from a few contributing areas adjacent to the stream and gauge. Thus, the representativeness of a gauge for processes in the whole basin depends on the distance of the nearest significant source to the station. The consequence of our study is that the assumptions of mixing models are not satisfied in river basins larger than 3 km². Copyright © 2006 John Wiley & Sons, Ltd.     

T‐NET,a dynamic model for simulating daily stream temperature at the regional scale based on a network topology

Currently, the distribution areas of aquatic species are studied by using air temperature as a proxy of water temperature, which is not available at a regional scale. To simulate water temperature at a regional scale, a physically based model using the equilibrium temperature concept and including upstream‐downstream propagation of the thermal signal is proposed. This model, called Temperature‐NETwork (T‐NET), is based on a hydrographical network topology and was tested at the Loire basin scale (10⁵ km²). The T‐NET model obtained a mean root mean square error of 1.6 °C at a daily time step on the basis of 128 water temperature stations (2008–2012). The model obtained excellent performance at stations located on small and medium rivers (distance from headwater <100 km) that are strongly influenced by headwater conditions (median root mean square error of 1.8 °C). The shading factor and the headwater temperature were the most important variables on the mean simulated temperature, while the river discharge influenced the daily temperature variation and diurnal amplitude. The T‐NET model simulates specific events, such as temperature of the Loire during the floods of June 1992 and the thermal regime response of streams during the heatwave of August 2003, much more efficiently than a simple point‐scale heat balance model. The T‐NET model is very consistent at a regional scale and could easily be transposed to changing forcing conditions and to other catchments. Copyright © 2016 John Wiley & Sons, Ltd.     

Coupled modeling of rainfall-induced floods and sediment transport at the catchment scale

Rainfall-induced floods may trigger intense sediment transport on erodible catchments, especially on the Loess Plateau in China, which in turn modifies the floods. However, the role of sediment transport in modifying floods has to date remained poorly understood. Concurrently, traditional hydrodynamic models for rainfall-induced floods typically ignore sediment transport, which may lead to inaccurate results for highly erodible catchments. Here, a two-dimensional (2D) coupled shallow water hydro-sediment-morphodynamic (SHSM) model, based on the Finite Volume Method on unstructured meshes and parallel computing, is proposed and applied to simulate rainfall-induced floods in the Zhidan catchment on the Loess Plateau, Shaanxi Province, China. For six historical floods of return periods up to 2 years, the numerical results compare well with observations of discharge hydrographs at the catchment outlet. The computed runoff-sediment yield relation is quantitatively reasonable as compared with other catchments under similar geographical conditions. It is revealed that neglecting sediment transport leads to underestimation of peak discharge of the flood by 14%–45%, whilst its effect on the timing of the peak discharge varies for different flood events. For 18 design floods with return periods of 10–500 years, sediment transport may lead to higher peak discharge by around 9%–15%. The temporal pattern of concentrated rainfall in a short period may lead to a larger exponent value of the power function for the runoff-sediment yield relation. The current finding leads us to propose that incorporating sediment transport in rainfall-induced flood modeling is warranted. The SHSM model is applicable to flood and sediment modeling at the catchment scale in support of risk management and water and soil management.