The influence of turbidity currents and contour currents on the distribution of deep‐water sediment waves offshore eastern Canada

Sediment waves are commonly observed on the sea floor and often vary in morphology and geometry according to factors such as seabed slope, density and discharge of turbidity currents, and the presence of persistent contour currents. This paper documents the morphology, internal geometry and distribution of deep‐water (4000 to 5000 m) bedforms observed on the sea floor offshore eastern Canada using high‐resolution multibeam bathymetry data and seismic stratigraphy. The bedforms have wavelengths of >1 km but fundamentally vary in terms of morphology and internal stratigraphy, and are distinguished into three main types. The first type, characterized by their long‐wavelength crescentic shape, is interpreted as net‐erosional cyclic steps. These cyclic steps were formed by turbidity currents flowing through canyons and overtopping and breaching levées. The second type, characterized by their linear shape and presence on levées, is interpreted as net‐depositional cyclic steps. These upslope migrating bedforms are strongly aggradational, indicating high sediment deposition from turbidity currents. The third type, characterized by their obliqueness to canyons, is observed on an open slope and is interpreted as antidunes. These antidunes were formed by the deflection of the upper dilute, low‐density parts of turbidity currents by contour currents. The modelling of the behaviour of these different types of turbidity currents reveals that fast‐flowing flows form cyclic steps while their upper parts overspill and are entrained westward by contour currents. The interaction between turbidity currents and contour currents results in flow thickening and reduced sediment concentration, which leads to lower flow velocities. Lower velocities, in turn, allow the formation of antidunes instead of cyclic steps because the densiometric Froude number (Fr′) decreases. Therefore, this study shows that both net‐erosional and net‐depositional cyclic steps are distributed along channels where turbidity currents prevail whereas antidunes form on open slopes, in a mixed turbidite/contourite system. This study provides insights into the influence of turbidity currents versus contour currents on the morphology, geometry and distribution of bedforms in a mixed turbidite–contourite system.     

Interaction between Downslope and Alongslope Processes on the Margins of Daihai Lake,North China: Implication for Deltaic Sedimentation Models of Lacustrine Rift Basin

Daihai Lake, a modern lacustrine rift basin, located in Inner Mongolia, North China, serves as an important modern analog for understanding deltaic depositional processes in an active rift setting. Two of the deltas (Yuanzigou delta and Bulianghe delta) on the margins of Daihai Lake were surveyed to compare and contrast stacking patterns using aerial photographs, field trenching and sediment sampling. Shallow cores and trench data collected from the margins of Daihai Lake indicate that a variety of depositional processes have been active since Daihai Lake formed. Two 3-D sedimentation models which employ chronostratigraphic correlation technique were generated. The chronostratigraphic sedimentation models predict and represent the architectures and sand-body continuity of sediments. Stratigraphical coincidence of the broad sheeted drifts and channel erosion suggests a coupling between downslope and alongslope processes. Distributary mouth bars are prevalent in the front of deltas on steeper slopes due to the dominance of down-slope flows. On the contrary, the along-slope currents favor the development of distal bar deposits with sheeted sandbodies on gentle depositional slopes. This study provides an insight into the architecture of complex sedimentary facies associated with highlighting key differences between downslope flows and alongslope currents. The distribution of sand within these deltas is of particular interests, with applications in understanding the architecture of hydrocarbon reservoirs formed in lacustrine rift basin.     

A unified model for bedform development and equilibrium under unidirectional,oscillatory and combined‐flows

The development of bedforms under unidirectional, oscillatory and combined‐flows results from temporal changes in sediment transport, flow and morphological response. In such flows, the bedform characteristics (for example, height, wavelength and shape) change over time, from their initiation to equilibrium with the imposed conditions, even if the flow conditions remain unchanged. These variations in bedform morphology during development are reflected in the sedimentary structures preserved in the rock record. Hence, understanding the time and morphological development in which bedforms evolve to an equilibrium stage is critical for informed reconstruction of the ancient sedimentary record. This article presents results from a laboratory flume study on bedform development and equilibrium development time conducted under purely unidirectional, purely oscillatory and combined‐flow conditions, which aimed to test and extend an empirical model developed in past work solely for unidirectional ripples. The present results yield a unified model for bedform development and equilibrium under unidirectional, oscillatory and combined‐flows. The experimental results show that the processes of bedform genesis and growth are common to all types of flows, and can be characterized into four stages: (i) incipient bedforms; (ii) growing bedforms; (iii) stabilizing bedforms; and (iv) fully developed bedforms. Furthermore, the development path of bedform; growth exhibits the same general trend for different flow types (for example, unidirectional, oscillatory and combined‐flows), bedform size (for example, small versus large ripples), bedform shape (for example, symmetrical or rounded), bedform planform geometry (for example, two‐dimensional versus three‐dimensional), flow velocities and sediment grain sizes. The equilibrium time for a wide range of bed configurations was determined and found to be inversely proportional to the sediment transport flux occurring for that flow condition.     

Ice‐marginal forced regressive deltas in glacial lake basins: geomorphology,facies variability and large‐scale depositional architecture

This study presents a synthesis of the geomorphology, facies variability and depositional architecture of ice‐marginal deltas affected by rapid lake‐level change. The integration of digital elevation models, outcrop, borehole, ground‐penetrating radar and high‐resolution shear‐wave seismic data allows for a comprehensive analysis of these delta systems and provides information about the distinct types of deltaic facies and geometries generated under different lake‐level trends. The exposed delta sediments record mainly the phase of maximum lake level and subsequent lake drainage. The stair‐stepped profiles of the delta systems reflect the progressive basinward lobe deposition during forced regression when the lakes successively drained. Depending on the rate and magnitude of lake‐level fall, fan‐shaped, lobate or more digitate tongue‐like delta morphologies developed. Deposits of the stair‐stepped transgressive delta bodies are buried, downlapped and onlapped by the younger forced regressive deposits. The delta styles comprise both Gilbert‐type deltas and shoal‐water deltas. The sedimentary facies of the steep Gilbert‐type delta foresets include a wide range of gravity‐flow deposits. Delta deposits of the forced‐regressive phase are commonly dominated by coarse‐grained debrisflow deposits, indicating strong upslope erosion and cannibalization of older delta deposits. Deposits of supercritical turbidity currents are particularly common in sand‐rich Gilbert‐type deltas that formed during slow rises in lake level and during highstands. Foreset beds consist typically of laterally and vertically stacked deposits of antidunes and cyclic steps. The trigger mechanisms for these supercritical turbidity currents were both hyperpycnal meltwater flows and slope‐failure events. Shoal‐water deltas formed at low water depths during both low rates of lake‐level rise and forced regression. Deposition occurred from tractional flows. Transgressive mouthbars form laterally extensive sand‐rich delta bodies with a digitate, multi‐tongue morphology. In contrast, forced regressive gravelly shoal‐water deltas show a high dispersion of flow directions and form laterally overlapping delta lobes. Deformation structures in the forced‐regressive ice‐marginal deltas are mainly extensional features, including normal faults, small graben or half‐graben structures and shear‐deformation bands, which are related to gravitational delta tectonics, postglacial faulting during glacial‐isostatic adjustment, and crestal collapse above salt domes. A neotectonic component cannot be ruled out in some cases.     

Sediment density flow distribution on wave-influenced deltas

Deltas are at the transition between fluvial and marine sedimentary environments where sediment density flows are often triggered during high river discharge events, forming submarine channels and sediment waves. On wave-influenced deltas, longshore currents are particularly efficient at transporting sediment alongshore, reducing the likelihood of sediment density flows from occurring at river mouths. This study describes four deltaic sedimentary systems at different stages of their evolution on a formerly glaciated continental inner shelf of eastern Canada in order to better understand the distribution of sediment density flows on wave-influenced deltas. Three types of settings are recognized as being prone to sediment density flows: (i) in the early stages of wave-influence and on large deltas, converging longshore currents can lead to offshelf sediment transport; (ii) on wave-influenced to wave-dominated deltas, a sandy spit can re-route the river mouth and sediment density flows form where the spit intersects the delta lip; (iii) in advanced stages of wave-dominated deltas and during their demise, rocky headlands are exposed and can intersect the slope, where off-shelf sediment transport occurs. These types of sediment density flows were all characterized by debris flows or surge-type turbidity currents which have limited offshore run-out. More rarely, hyperpycnal flows form at the river mouths, especially where the river incises glaciomarine clays prone to landsliding in the river, which increases fine-grained fluvial suspended sediment concentration. Overall, these results highlight the predominance of fluvial-dominated deltas during a phase of relative sea-level fall combined with high sediment supply. However, as soon as sediment supply diminishes, wave action remobilizes sediment alongshore modifying the distribution and types of sediment density flows occurring on wave-influenced deltas.     

How turbidity current frequency and character varies down a fjord‐delta system: Combining direct monitoring,deposits and seismic data

Submarine turbidity currents are one of the most important processes for moving sediment across our planet; they are hazardous to offshore infrastructure, deposit petroleum reservoirs worldwide, and may record tsunamigenic landslides. However, there are few studies that have monitored these submarine flows in action, and even fewer studies that have combined direct monitoring with longer‐term records from core and seismic data of deposits. This article provides one of the most complete studies yet of a turbidity current system. The aim here is to understand what controls changes in flow frequency and character along the turbidite system. The study area is a 12 km long delta‐fed fjord (Howe Sound) in British Columbia, Canada. Over 100 often powerful (up to 2 to 3 m sec^?1) events occur each year in the highly‐active proximal channels, which extend for 1 to 2 km from the delta lip. About half of these events reach the lobes at the channel mouths. However, flow frequency decreases rapidly once these initially sand‐rich flows become unconfined, and only one to five flows run out across the mid‐slope each year. Many of these sand‐rich, channelized, delta‐sourced flows therefore dissipated over a few hundred metres, once unconfined, rather than eroding and igniting. Upflow migrating bedforms indicate that supercritical flow dominated in the proximal channels and lobes, and also across the unconfined mid‐slope. These supercritical flows deposited thick sand beds in proximal channels and lobes, but thinner and finer beds on the unconfined mid‐slope. The distal flat basin records far larger volume and more hazardous events that have a recurrence interval of ca 100 years. This study shows how sand‐rich delta‐fed flows dissipate rapidly once they become unconfined, that supercritical flows dominate in both confined and unconfined settings, and how a second type of more hazardous, and much less frequent event is linked to a different scale of margin failure.     

Submarine sedimentation on a developing Holocene fan delta

The submarine morphology, sediments, and three-dimensional geometry of a developing fan delta are described using data from acoustic surveys, bottom sampling, and observations from a manned submersible. The fan system is being built in a British Columbian fjord (water depth 410 m) supplied with coarse-grained sediments from a fjord-side river. Construction of the subaqueous fan began about 10–12,000 yr BP and is ongoing. The system is analogous to part of one fault-uplift sedimentation cycle in ancient fan deltas. Initially, when offshore relief was at a maximum, acoustically chaotic sediment wedges were emplaced over fjord-bottom glaciomarine deposits. Subsequent aggradation/progradation resulted in moderately dipping sequences interrupted by local chaotic units. The present fan surface (average slope 13°) is divided into six zones arranged concentrically from the fan apex, on the basis of form, sediment and process interpretations. Continued subaqueous fan growth results from settling of river-derived sediments from suspension and downslope sediment dispersal by episodic gravity flows, apparently fed by underflows from the river.     

Multidirectional,synchronously‐triggered seismo‐turbidites and debrites revealed by X‐ray computed tomography (CT)

On 21 April 2007, a M_w 6·2 earthquake struck Aysén fjord (Chilean Patagonia) and caused onshore and offshore mass movements which triggered tsunamis and density flows in the fjord. To better understand the facies successions in, and the intercalation of, the density‐flow deposits, a study was made of the 2007 deposits in 22 short sediment cores taken in the inner Aysén fjord. By combining grain‐size analysis with X‐ray computed tomography scanning, it was possible to demonstrate that the encountered facies correspond to classical divisions of debrites and turbidites. The single‐event deposits consist of a succession of several sub‐deposits deposited under different flow directions and can be interpreted as stacked turbidites. Orientations of: (i) folds; (ii) imbricated mud clasts; (iii) backsets and foresets of climbing ripples; and (iv) asymmetrical convolute lamination were used to determine relative flow directions at the location of the cores. By assigning the basal flow of the stacked debrites and turbidites to the closest principal mass flow, the absolute flow directions of the sub‐deposits were determined which, in combination with multibeam basin‐floor morphology, allowed reconstruction of the 2007 density‐flow successions in Aysén fjord. Furthermore, alternating flow directions provide evidence for a seiche induced by the density flows. It was concluded that X‐ray computed tomography scans provide crucial information for reconstructing palaeoflows and can be a useful tool in marine and lacustrine sedimentology and palaeoseismology. The multidirectionality of sub‐deposits in turbidites is, next to differences in mineralogy, a new criterion to identify stacked turbidites. These multidirectional, stacked turbidites are an indication of simultaneous triggering of density flows and can therefore, in most cases, be attributed to earthquakes, ruling out other triggers, such as floods, storms or other sediment failures.     

River‐dominated,shelf‐edge deltas: delivery of sand across the shelf break in the absence of slope incision

Shelf‐edge deltas record the potential magnitude of sediment delivery from shallow water shelf into deep water slope and basin floor and, if un‐incised, represent the main increment of shelf‐margin growth into the basin, for that period. The three‐dimensional complexity of shelf‐edge delta systems and along‐strike variability at the shelf edge in particular, remains understudied. The Permian–Triassic Kookfontein Formation of the Tanqua Karoo Basin, South Africa, offers extensive three‐dimensional exposure (>100 km²) and therefore a unique opportunity to evaluate shelf‐edge strata from an outcrop perspective. Analysis of stratal geometry and facies distribution from 52 measured and correlated stratigraphic sections show the following: (i) In outer‐shelf areas, parasequences are characterized by undeformed, river‐dominated, storm‐wave influenced delta mouth‐bar sandstones interbedded with packages showing evidence of syn‐depositional deformation. The amount and intensity of soft‐sediment deformation increases significantly towards the shelf edge where slump units and debris flows sourced from collapsed mouth‐bar packages transport material down slope. (ii) On the upper slope, mouth‐bar and delta‐front sandstones pinch out within 2 km of the shelf break and most slump and debris flow units pinch out within 4 km of the shelf break. (iii) Further down the slope, parasequences consist of finer‐grained turbidites, characterized by interbedded, thin tabular siltstones and sandstones. The results highlight that river‐dominated, shelf‐edge deltas transport large volumes of sand to the upper slope, even when major shelf‐edge incisions are absent. In this case, transport to the upper slope through slumping, debris flows and un‐channellized low density turbidites is distributed evenly along strike.     

Morphometric analysis of slipface processes of an aeolian dune: Implications for grain‐flow dynamics

Grain flows are an integral part of sand dune migration; they are a direct response to the local wind regime and reflect complex interactions between localized over‐steepening of a dune slipface and complex turbulent airflow on the lee slope. Grain flows are primarily responsible for delivering sediment to the base of a dune, thus driving slipface advancement; yet, there are few constraints on their morphological and spatial characteristics or the amount of sediment that is redistributed by these flows. Using a combination of high‐resolution terrestrial laser scanning and video recordings, four distinct grain‐flow types are identified based on morphology and area on a dune slipface. Grain‐flow morphologies range from small, superficial flows to larger flows that affect greater portions of the slipface, moving significant amounts of sediment. Detailed field observations are presented of the dynamics of lee slopes, including measurements of the initiation location, thickness, magnitude and frequency statistics of grain flows, as well as volume estimates of redistributed sediment for each grain flow observed. High‐resolution laser scans enable accurate quantification of bulk sediment transfer from individual grain flows and can be used to study grain flows in a variety of environments. A categorization of grain‐flow morphologies is presented that links styles of flows with wind strength and direction, turbulent airflow, sediment deposition and environment.     

Gilbert‐type deltas recording short‐term base‐level changes: Delta‐brink morphodynamics and related foreset facies

Gilbert‐type deltas are sensitive recorders of short‐term base‐level changes, but the delta‐front record of a base‐level rise tends to be erased by fluvial erosion during a subsequent base‐level fall, which renders the bulk record of base‐level changes difficult to decipher from the delta‐front deposits. The present detailed study of three large Pleistocene Gilbert‐type deltas uplifted on the southern coast of the Gulf of Corinth, Greece, indicates a genetic link between the delta‐front morphodynamic responses to base‐level changes and the delta‐slope sedimentation processes. Sigmoidal delta‐brink architecture signifies a base‐level rise and is accompanied by a debrite‐dominated assemblage of delta foreset deposits, thought to form when the aggrading delta front stores sediment and undergoes discrete gravitational collapses. Oblique delta‐brink architecture tends to be accompanied by a turbidite‐dominated assemblage of foreset deposits, which are thought to form when the delta‐front accommodation decreases and the sediment carried by hyperpycnal effluent bypasses the front. This primary signal of the system response to base‐level changes combines further with the secondary ‘noise’ of delta autogenic variation and possible allogenic fluctuations in fluvial discharge due to regional climatic conditions. Nevertheless, the evidence suggests that the facies trends of delta foreset deposits may be used to decipher the delta ‘hidden’ record of base‐level changes obliterated by fluvial topset erosion. Early‐stage bayhead deltas may be an exception from the hypothetical model, because their narrow front tends to be swept by river floods irrespective of base‐level behaviour and their subaqueous slope deposits are thus mainly turbidites.     

Morphodynamics and sedimentary structures of bedforms under supercritical‐flow conditions: New insights from flume experiments

Supercritical‐flow phenomena are fairly common in modern sedimentary environments, yet their recognition and analysis remain difficult in the stratigraphic record. This fact is commonly ascribed to the poor preservation potential of deposits from high‐energy supercritical flows. However, the number of flume data sets on supercritical‐flow dynamics and sedimentary structures is very limited in comparison with available data for subcritical flows, which hampers the recognition and interpretation of such deposits. The results of systematic flume experiments spanning a broad range of supercritical‐flow bedforms (antidunes, chutes‐and‐pools and cyclic steps) developed in mobile sand beds of variable grain sizes are presented. Flow character and related bedform patterns are constrained through time‐series measurements of bed configurations, flow depths, flow velocities and Froude numbers. The results allow the refinement and extension of some widely used bedform stability diagrams in the supercritical‐flow domain, clarifying in particular the morphodynamic relations between antidunes and cyclic steps. The onset of antidunes is controlled by flows exceeding a threshold Froude number. The transition from antidunes to cyclic steps in fine to medium‐grained sand occurs at a threshold mobility parameter. Sedimentary structures associated with supercritical bedforms developed under variable aggradation rates are revealed by means of combining flume results and synthetic stratigraphy. The sedimentary structures are compared with examples from field and other flume studies. Aggradation rate is seen to exert an important control on the geometry of supercritical‐flow structures and should be considered when identifying supercritical bedforms in the sedimentary record.     

Sedimentary architecture beneath lakes subjected to storms: Control by turbidity current bypass and turbidite armouring,interpreted from ground‐penetrating radar images

Turbidites within Holocene lacustrine sediment cores occur worldwide and are valued deposits that record a history of earthquakes or storms. Without sedimentary architecture, however, interpretation of the cause, provenance and behaviour of their parent turbidity currents are speculative. Here, these interpretations are made from two‐dimensional ground‐penetrating radar images of ‘shore to shore’ architecture beneath three, previously cored lakes within the low seismicity New England (USA ) region. Shallow depths, low water and sediment conductivities, and signal sensitivity to density contrasts uniquely provided up to 30 m of sediment signal penetration. Core comparisons and signal analysis reveal that most horizons represent multidecimetre‐thick clusters of Holocene turbidites, which are denser than their organic‐rich silt matrix. Some horizons also represent erosional unconformities and sediment bypass interfaces. The key, common, architectural consequences of turbidity current activity include limited foreset progradation, conformably pinched or unconformable layers of organic‐rich sediment onlapped against slopes beneath 5 to 6 m of water, and mounded stratified sediments beneath rises. These features indicate that turbidity currents repeatedly bypassed the same slope without deposition and regardless of dip, and then simultaneously armoured and bypassed inter‐turbidite sediment along rises and basins to provide basinward, generally age‐conformable accumulation. The mounding precludes significant basinward focusing. Variable horizon amplitude suggests metre‐scale changes in armouring density. Unconformities localized near breaks in dip beneath slopes suggest erosive hydraulic jumps. One lake shows evidence of historically maintained channels associated with specific deltas. Shelf strata indicating inland current generation, similar key architecture in other, uncored lakes, countable, lake‐wide horizons, and absent slumps, slides and faults are consistent with storm‐driven turbidity currents, and with previous, core‐based conclusions that severe, Holocene storms were episodic throughout this region. The results generalize marine bypass and armouring to lacustrine settings, and so probably occur worldwide in lakes subject only to storms, including lakes where ground‐penetrating radar may locate core sites.     

Response of low‐angle dunes to variable flow

Current understanding of bedform dynamics is largely based on field and laboratory observations of bedforms in steady flow environments. There are relatively few investigations of bedforms in flows dominated by unsteadiness associated with rapidly changing flows or tides. As a consequence, the ability to predict bedform response to variable flow is rudimentary. Using high‐resolution multibeam bathymetric data, this study explores the dynamics of a dune field developed by tidally modulated, fluvially dominated flow in the Fraser River Estuary, British Columbia, Canada. The dunes were dominantly low lee angle features characteristic of large, deep river channels. Data were collected over a field ca 1·0 km long and 0·5 km wide through a complete diurnal tidal cycle during the rising limb of the hydrograph immediately prior to peak freshet, yielding the most comprehensive characterization of low‐angle dunes ever reported. The data show that bedform height and lee angle slope respond to variable flow by declining as the tide ebbs, then increasing as the tide rises and the flow velocities decrease. Bedform lengths do not appear to respond to the changes in velocity caused by the tides. Changes in the bedform height and lee angle have a counterclockwise hysteresis with mean flow velocity, indicating that changes in the bedform geometry lag changes in the flow. The data reveal that lee angle slope responds directly to suspended sediment concentration, supporting previous speculation that low‐angle dune morphology is maintained by erosion of the dune stoss and crest at high flow, and deposition of that material in the dune trough.     

超临界浊流之地貌动力学和沉积特征

超临界流在现代沉积环境中几乎无处不在,但相关沉积物却极少从地层记录中被辨识出来,这是当前沉积学研究所面临的一个困境,文中称之为“超临界流沉积问题”。按弗劳德数增大顺序,超临界流可依次形成稳定逆行沙丘、不稳定逆行沙丘、急滩—深潭及周期阶坎等底形,相应的地貌动力学也从同相位体制(逆行沙丘)逐渐过渡为水跃体制(急滩—深潭和周期阶坎)。相对于明渠流,浊流因折算密度低而更易成为超临界流。超临界浊流底形的长波长、低幅度、逆流(坡)迁移特性,决定了其沉积物发育特征的后积层理、近平行—低角度交错层理、与水跃有关的快速堆积及冲刷—充填和建造—充填构造。超临界浊流沉积可以通过沉积体的几何形态(包括波长/波高比、平面和剖面形态等)和内部沉积特征(包括波脊逆坡迁移、沉积构造、粒度变化趋势及沉积相组合等)的综合分析加以鉴别。露头、岩心分析与高分辨率地震、浅剖、多波束测深等地球物理资料的综合,是准确鉴别超临界浊流沉积单元的重要途径。本文对超临界浊流地貌动力学研究进展进行综述,并对地层记录中超临界浊流沉积的鉴别标志及相关问题进行探讨。     

The Middle Pleistocene glaciolacustrine environment of an ice‐dammed mountain valley,Sudeten Mountains,Poland

This article reports on an Early Saalian proglacial lake formed between the Scandinavian Ice Sheet and the front of the Sudeten Mountains, Poland. Sediments investigated at Mys?ów point to a transition from glacifluvial to glaciolacustrine environments. The bulk of the sediments was deposited in deep‐water Gilbert‐type deltas (A–E complexes). A delta plain (topset) gradually passes into a subaerial plateau and then a clastic shoreline and the subaquatic slope of a prograding delta (foreset). The glaciolacustrine lithofacies represent a number of lake‐basin environments, from marginal subaqueous slopes to distal parts of a subaqueous fan. Glaciolacustrine and glaciodeltaic deposits locally reach ?50–70 m in thickness. Analyses of A–E complexes indicate that the lake existed for more than 130 years and that its origin and evolution were closely connected with the ice front. This case study records lake sedimentation at an ice‐sheet margin with cohesionless gravity flows, turbidity currents, debris‐avalanching and, to a much lesser degree, parapelagic suspension fall‐out and ice‐raft dumping. In the initial stage, the lake extended more than 10 km to the south, and the deposition was relatively slow. In the second stage, recession of the ice sheet caused rapid growth of a delta. The third and ultimate stage coincided with the final glacial recession, with rapid deposition occurring only on the lake bottom. The model of the glaciolacustrine environment presented here may also be applicable to many other proglacial lakes in mountain areas.     

Asymmetrical deltas below wave base: Insights from the Fraser River Delta,Canada

The Fraser River Delta exhibits distinct asymmetry in the sedimentological and neoichnological characteristics of the updrift (south) and downdrift (north) sides of the main distributary channel in water depths below storm‐wave base. The asymmetry is the result of net northward tidal flow. Tides erode sediments across the updrift delta front, whereas the downdrift delta front is an area of net deposition. A submarine channel prevents sand eroded from the updrift delta front from reaching the downdrift delta. The updrift delta front and updrift upper prodelta are composed of sand or heterolithic sand and mud that show a low density of burrowing (Bioturbation Index 0 to 3) and are dominated by simple traces. The downdrift delta front and prodelta, and the updrift lower prodelta are composed of homogeneous muds with significantly higher bioturbation intensities (Bioturbation Index 3 to 6), and a more diverse suite of traces akin to Cruziana Ichnofacies. Using the Fraser River Delta as an archetype and comparing the Fraser to the Amazon River Delta, a preliminary model for deep‐water (below storm‐wave base: ca 20 m) asymmetrical deltas is proposed. Firstly, deep‐water asymmetrical deltas are recognized from sediments deposited below storm‐wave base. At these depths, tidal and ocean currents are more likely to impact sediment transport, but wave processes are less effective as a sediment transport mechanism. Sediments deposited below storm‐wave base in deep‐water asymmetrical deltas will display the following: (i) the updrift delta front will be coarser‐grained (for example, sand‐dominated or heterolithic sand and mud), than the downdrift delta front (for example, mud‐dominated); and (ii) the updrift delta front should show low‐diversity suites of simple burrows. Depending on sedimentation rates, the downdrift delta front and prodelta may show either high diversity suites of traces that are dominated by both complex and simple burrows (low sedimentation rates) or low density and diversity suites akin to the updrift delta front (high sedimentation rates).     

Morphology and curvature of delta slopes in Swiss lakes: lessons for the interpretation of clinoforms in seismic data

Seismic surveys were conducted and bathymetric data obtained from four alpine lakes in Switzerland. The curvature of the delta slopes was analysed with mathematical equations. Linear or exponential profiles are observed, representing planar or concave morphologies respectively. Planar profiles are interpreted to represent sediment that rests at the angle-of-repose. The slope angle of these profiles shows a correlation with sediment calibre. Exponential profiles do not show a clear correlation between sediment calibre and slope angle; they do not rest at the angle-of-repose, and different kinds of sediment can rest at the same slope angle. At the transition from lower slope to toe- of-slope, the exponential equation fails to predict the present-day morphology. The toe-of-slope lies above the predicted trend. This is attributed to a drastic increase in turbidite deposition that provides additional sediment and raises the basin-floor profile above the predicted trend. The breaks between delta plain and slope are sharp, reflecting an abrupt change from transport by river flow and waves to gravity-driven transport. In these lakes, the base-level fluctuations relative to supply are small and insufficient to alter this sharp topographic break. The absence of sigmoidal profiles on the Swiss deltas is attributed to the high rate of progradation coupled with small fluctuations in base level.     

Architecture and evolution of a fjord‐head delta,western Vancouver Island,British Columbia

The architectural framework and Holocene evolution of the Zeballos fjord‐head delta on west‐central Vancouver Island was established through a multidisciplinary field‐based study. The Zeballos delta is a composite feature, consisting of an elevated, incised, late Pleistocene delta and an inset Holocene delta graded to present sea level. Both deltas have a classic Gilbert‐type tripartite architecture, with nearly flat topset and bottomset units and an inclined foreset unit. Time domain electromagnetic (TDEM) and ground‐penetrating radar (GPR) surveys, borehole data, and gravel pit exposures provided information on the internal form, lithologies and substrate of both deltas. Both sets of deltaic deposits coarsen upward from silt in the bottomset unit to gravel in the topset unit. The TDEM survey revealed a highly irregular, buried bedrock surface, ranging from 20 m to 190 m in depth, and it delineated saltwater intrusion into the deltaic sediments. Late Quaternary sea‐level change at Zeballos was inferred from delta morphology and the GPR survey. The elevated, late Pleistocene delta was constructed when the sea was about 21 m higher relative to the land than it is today. It was dissected when sea‐level fell rapidly as a result of glacio‐isostatic rebound. Relative sea‐level reached a position about 20 m below the present datum during the early Holocene. Foreset beds that overlap and progressively climb in a seaward direction and topset beds that thicken to 26 m landward imply that the delta aggraded and prograded into Zeballos Inlet during the middle and late Holocene transgression. Sea‐level may have risen above the present datum during the middle Holocene, creating a delta plain at about 4 m a.s.l. Remnants of this surface are preserved along the valley margins. Copyright © 2004 John Wiley & Sons, Ltd.     

Froude supercritical flow bedforms in deepwater slope channels? Field examples in conglomerates,sandstones and fine‐grained deposits

Active margin continental slope outcrops from the Eocene Juncal Formation, the Eocene La Jolla Group and the Miocene Capistrano Formation display sedimentary structures and depositional geometries that suggest deposition from Froude supercritical flow, based on comparison to strata produced by flume experiments. These deposits range from boulder‐size soft clasts and cobble‐size hard clasts to silt and mud, and display long‐wavelength and low‐amplitude convex‐up and concave‐up geometries that range from centimetre to hundreds of metres scale, low‐angle foresets and backsets, and common internal and bounding erosion surfaces from centimetres to tens of metres in depth. In places, planar laminations, structureless beds and normally graded beds are laterally or vertically associated with such structures. In other places, consistent backsets or deep and steep‐sided scours occur. This study aimed to discuss the origin of the observed bedforms, contributed to recognition of supercritical flow deposits on continental slopes and expanded the outcrop examples of supercritical flow deposits to silt and mud. This work implies that the erosive and powerful Froude supercritical flow turbidity currents may have a substantial impact on erosional and depositional dynamics on deepwater slopes, especially on active margins due to the steep gradients and high sediment supply.