Stochastic finite-fault modeling of M w 5.4 earthquake along Uttarakhand–Nepal border

Natural Hazards - In this work, an attempt has been made to simulate strong ground motion of M w 5.4 earthquake in Kumaun region of Uttarakhand. The simulation is based on modified stochastic...     

Intensity map of Mw 6.9 2011 Sikkim–Nepal border earthquake and its relationships with PGA: distance and magnitude

We compiled available information of damages and other effects caused by the September 18, 2011, Sikkim–Nepal border earthquake from the print and electronic media, and interpreted them to obtain Modified Mercalli Intensity (MMI) at over 142 locations. These values are used to prepare the intensity map of the Sikkim earthquake. The map reveals several interesting features. Within the meizoseismal area, the most heavily damaged villages are concentrated toward the eastern edge of the inferred fault, consistent with eastern directivity. The intensities are amplified significantly in areas located along rivers, within deltas or on coastal alluvium such as mud flats and salt pans. We have also derived empirical relation between MMI and ground motion parameters using least square regression technique and compared it with the available relationships available for other regions of the world. Further, seismic intensity information available for historical earthquakes which have occurred in NE Himalayas along with present intensity has been utilized for developing attenuation relationship for NE India using two-step regression analyses. The derived attenuation relation is useful for assessing damage of a potential future earthquake (earthquake scenario-based planning purposes) for the northeast Himalaya region.

     

Spatial analysis of the frequency–magnitude distribution of aftershock activity of 2003 Bam earthquake: southeast Iran

The Bam earthquake (2003 December 26, M _W = 6.6) was one of the largest earthquakes that occurred in southeast of Iran during last century. It took place along an N–S trending right-lateral strike-slip fault, almost near the southern end of Nyband–Gowk fault. In this study, we mapped the frequency–magnitude distribution of aftershock events spatially across the Bam aftershock zone. The b-value varies between 0.6 and 1.1 across the Bam rupture zone. The overall depth distribution of b-value in Bam aftershock zone reveals two distinct increases in b-value: (1) at depths of 8–10 km and (2) shallower than 4 km beneath the Bam city. There is no correlation between high b- value anomalies found in this study and the region of largest slip, whereas the spatial correlation between high b-value anomalies and the zone of low V _s and high σ (in earlier tomography study) is obvious. This correlation reveals that material properties and increasing heterogeneity are more important in controlling b-value distribution in Bam earthquake rupture zone. The high b-value anomaly near the surface of northern part of rupture zone may be related to unconsolidated and water-rich quaternary alluvial sediments and probable low-strength rocks beneath them. The high b-value anomaly at depth range 8–10 km can be correlated with fractured and fluid-filled mass, which may result from the movement of magma during Eocene volcanism in the Bam area. In this study, the induced changes in pore fluid pressure due to main shock are suggested as a mechanism for aftershock generation.     

The intracratonic Caraíbas–Itacarambi earthquake of December 09, 2007 (4.9 mb), Minas Gerais State,Brazil

On December 9, 2007, a 4.9 m_b earthquake occurred in the middle of the São Francisco Craton, in a region with no known previous activity larger than 4 m_b. This event reached intensity VII MM (Modified Mercalli) causing the first fatal victim in Brazil. The activity had started in May 25, 2007 with a 3.5 magnitude event and continued for several months, motivating the deployment of a local 6-station network. A three week seismic quiescence was observed before the mainshock. Initial absolute hypocenters were calculated with best fitting velocity models and then relative locations were determined with hypoDD. The aftershock distribution indicates a 3 km long rupture for the mainshock. The fault plane solution, based on P-wave polarities and hypocentral trend, indicates a reverse faulting mechanism on a N30°Ε striking plane dipping about 40° to the SE. The rupture depth extends from about 0.3 to 1.2 km only. Despite the shallow depth of the mainshock, no surface feature could be correlated with the fault plane. Aeromagnetic data in the epicentral area show short-wavelength lineaments trending NNE–SSW to NE–SW which we interpret as faults and fractures in the craton basement beneath the surface limestone layer. We propose that the Caraíbas–Itacarambi seismicity is probably associated with reactivation of these basement fractures and faults under the present E–W compressional stress field in this region of the South American Plate.     

Probabilistic assessment of earthquake hazard in the Andaman–Nicobar–Sumatra region

Natural Hazards - The Andaman–Nicobar–Sumatra (ANS) region is a very hazardous area on the globe, which has witnessed a megathrust earthquake of Mw 9.2 on 26 December 2004 and several...     

The role of water resources in the evolution of the Israeli–Lebanese border

The current location of the border between Lebanon and Palestine, today's Israel, is a product of various competing forces. The Zionist Organization aspired to include the entire Galilee region up to the lower reaches of the Litani River (also known as the Kassimiyah River) within Palestine. The river itself was the desired northern border of the country. The Zionists supported their position by employing instrumental arguments that were largely related to the availability of water resources. On the other hand, residents of the upper Galilee, today's southern Lebanon, demanded that they be included with Lebanon. They used their trade links with Beirut, and cultural and familial ties with other parts of Lebanon to support their position. These instrumental and expressive arguments appear to have assisted in the demarcation of the border between Lebanon and Palestine. Currently, access to the water resources, not necessarily control over them, is likely to influence negotiations between Israel and Lebanon over the future of the Israeli-occupied security zone in southern Lebanon.     

Application of the region–time–length algorithm to study of earthquake precursors in the Thailand–Laos–Myanmar borders

In order to examine the precursory seismic quiescence of upcoming hazardous earthquakes, the seismicity data available in the vicinity of the Thailand–Laos–Myanmar borders was analyzed using the Region–Time–Length (RTL) algorithm based statistical technique. The utilized earthquake data were obtained from the International Seismological Centre. Thereafter, the homogeneity and completeness of the catalogue were improved. After performing iterative tests with different values of the \(r_{0}\) and \(t_{0}\) parameters, those of \(r_{0}\) = 120 km and \(t_{0}\) = 2 yr yielded reasonable estimates of the anomalous RTL scores, in both temporal variation and spatial distribution, of a few years prior to five out of eight strong-to-major recognized earthquakes. Statistical evaluation of both the correlation coefficient and stochastic process for the RTL were checked and revealed that the RTL score obtained here excluded artificial or random phenomena. Therefore, the prospective earthquake sources mentioned here should be recognized and effective mitigation plans should be provided.     

Recognition of strong earthquake–prone areas with a single learning class

This article presents a new Barrier recognition algorithm with learning, designed for recognition of earthquake-prone areas. In comparison to the Crust (Kora) algorithm, used by the classical EPA approach, the Barrier algorithm proceeds with learning just on one “pure” high-seismic class. The new algorithm operates in the space of absolute values of the geological–geophysical parameters of the objects. The algorithm is used for recognition of earthquake-prone areas with М ≥ 6.0 in the Caucasus region. Comparative analysis of the Crust and Barrier algorithms justifies their productive coherence.     

The Guarani Aquifer System: estimation of recharge along the Uruguay–Brazil border

The cities of Rivera and Santana do Livramento are located on the outcropping area of the sandstone Guarani Aquifer on the Brazil–Uruguay border, where the aquifer is being increasingly exploited. Therefore, recharge estimates are needed to address sustainability. First, a conceptual model of the area was developed. A multilayer, heterogeneous and anisotropic groundwater-flow model was built to validate the conceptual model and to estimate recharge. A field campaign was conducted to collect water samples and monitor water levels used for model calibration. Field data revealed that there exists vertical gradients between confining basalts and underlying sandstones, suggesting basalts could indirectly recharge sandstone in fractured areas. Simulated downward flow between them was a small amount within the global water budget. Calibrated recharge rates over basalts and over outcropping sandstones were 1.3 and 8.1% of mean annual precipitation, respectively. A big portion of sandstone recharge would be drained by streams. The application of a water balance yielded a recharge of 8.5% of average annual precipitation. The numerical model and the water balance yielded similar recharge values consistent with determinations from previous authors in the area and other regions of the aquifer, providing an upper bound for recharge in this transboundary aquifer.     

Geochronology of Early Cretaceous copper mineralization at the NE China–North Korea border

ABSTRACT

North Korea is host to world-class metallic mineral deposits, such as the Komdok Cu–Pb–Zn polymetallic mineral belt, but little is known about the resource. To better understand the genesis of the Cu mineralization around the China–North Korea border, we determined the U–Pb, Re-Os, and Rb–Sr ages of three deposits in the area. Sulfide samples from the Hyesan Cu deposit produced Rb–Sr isochron ages of 127.4 ± 4.5 Ma. The Wanbaoyuan Cu deposit yielded a molybdenite Re–Os isochron age of 127.5 ± 3.2 Ma, and a granodiorite sample from the Linjiang Cu deposit gave a zircon U–Pb age of 129.5 ± 0.8 Ma. Combined with geochronological data from previous studies, these new ages suggest that the Cu mineralization occurred mainly during the Cretaceous, and the rollback of the Paleo-Pacific Plate was responsible for the Cu mineralization in NE China–North Korea border.     

The tectonic conditions of the August 2, 2007, M ∼ 6.1 Nevelsk earthquake

This paper reports the results of field observation and the study of coastal tectonic deformations related to the Nevelsk tsunamigenic earthquake (August 2, 2007, M ～ 6.1) obtained in August-September of 2007. The earthquake caused a 0.5- to 1.5-m rise of and partial desiccation of the southern, central, and northern benches and the formation of longitudinal structural ridges seaward of Lovetskaya Bay. In the framework of the new model of the Kamyshovy (West Sakhalin) Anticlinorum as a structure of the Quaternary and Middle Quaternary crustal detachment, the relationships between the earthquake and the slow gravitational creep of the upper crust on its western slope with local squeezing of the Middle Miocene Nevelsk siltstones are discussed.     

Fractal variogram-based time–space of aftershock sequences analysis—case study: the May 21, 2003 Boumerdes–Algeria earthquake, M w = 6.8

The most of shallow earthquakes are followed, just after the main shock, by increased residual seismicity known as “aftershocks” or “aftershock sequences”. Because of their disparity in time and space, aftershock sequences are more or less obvious and their productivity is spread out in time. Several studies have been regularly proposed to explain or to understand the mechanisms of the occurrence and the behaviour of these small earthquakes. In a theoretical context, many factors can induce the aftershock triggering: residual friction, subcritical crack growth, pore fluid flow etc. Just after the occurrence of the most destructive main shock of the 21 May 2003 Boumerdes (Algeria) earthquake, a wide sequence of aftershocks was recorded at different geographical locations and with various magnitudes. Based on the fact that the region of Boumerdes (40 km east of the capital Algiers) did not develop major earthquakes in the past, a geostatistical investigation of the data for this aftershock sequence is a valuable input for better seismogeological identification of this area. In the present analysis, after an overview of the geological factors in the likely occurrence of the earthquake, fundamental statistical parameters were chosen: the b value from the Gutenberg–Richter law, the p factor of the extracted respectively from the b value and the fractal variogram defined as a graphic tool to describe the continuity or the roughness of data. Jointly to the geostatistical parameters provided by the variogram like the fractal dimension. The main objective of the calculation and interpretation of these parameters is oriented towards a better understanding of the seismicity of the region of Boumerdes (Algeria) now classified as seismogenic zone.     

The Campanian–Maastrichtian of the Aures Basin,Algeria: Paleobiogeographical distribution of ostracods

A detailed biostratigraphic study of four sections (El Kantara, Menaa, Tighanimine and El Gaâga) in the Campanian–Maastrichtian of the Aures Basin in Algeria allows the identification of 109 ostracod species belonging to 50 genera. From a biochronostratigraphic point of view, none of the identified ostracod assemblages are typically restricted to the Campanian or to the Maastrichtian, but rather characterize a range covering the Campanian–Maastrichtian. As regards the paleobiogeography, the presence of species in common between Algeria and other countries or regions enables us to compile four maps showing the distribution of two provinces that developed during the Santonian-Paleocene, i) the South-West and South Tethyan Margins Province, including North Africa, the Middle East and Arabian Peninsula, and ii) the East Atlantic Margin Province, bordering West and Central-West Africa. We can also recognize relationships between the different regions making up these provinces, which remained under more or less arid, subtropical to tropical climates, with ostracods migrating according to the directions of ocean currents during the Late Cretaceous. The dispersal of the ostracods reflects marine communication between these provinces and India, the southern USA and Jamaica, Brazil and Europe.     

Heating–freezing effects on the pore size distribution of a kaolinite clay

This study aims to quantify the effect of heating and freezing temperatures on the pore size distribution of saturated clays. Three kaolinite clay specimens were subjected to different temperatures: 20, 70, and ? 10 °C. Upon achieving the desired temperature for each specimen, the specimens were flash frozen in liquid nitrogen to preserve their microstructure. Each specimen was, then, freeze-dried for 24 h after which consecutive two-dimensional (2-D) SEM images were taken using a dual focused ion beam/scanning electron microscope. The produced 2-D images of each specimen were used to reconstruct three-dimensional tomographies of the specimens, which were analyzed to determine the pore size distribution at each temperature. Compared to the specimen at room temperature, the pores in the specimen subjected to ? 10 °C were larger; this is believed to be due to the formation of ice lenses inside the pores upon freezing and potential merging between initial pores to form larger pores. On the other hand, the heated specimen showed an increase in the volume of the smaller pores and a decrease in the volume of the larger pores compared to the specimen at room temperature. This opposite behavior between the small and large pores in the heated specimen is justified considering (1) the easier flow of water out of the larger pores compared to that in the smaller pores and (2) the anisotropic nature of the thermal expansion of the clay particles.     

Deformation behavior of migmatites: insights from microstructural analysis of a garnet–sillimanite–mullite–quartz–feldspar-bearing anatectic migmatite at Rampura–Agucha,Aravalli–Delhi Fold Belt,NW India

International Journal of Earth Sciences - In the present study we investigate the microstructural development in mullite, quartz and garnet in an anatectic migmatite hosted within a Grenvillian-age...     

Flood resilience in paired US–Mexico border cities: a study of binational risk perceptions

Natural Hazards - The present study was done to analyze and compare synoptic conditions during the most durable pollution and clean waves (MDPW and MDCW) in Tehran City (capital of Iran). For this...     

Supply-chain impacts of Sichuan earthquake: a case study using disaster input–output analysis

Natural Hazards - With the development of interregional trade, a potential disaster that happens in one place could cause enormous economic losses in distant areas. Timely and comprehensive...