Studies of TLP dynamic response under wind, waves and current

Investigated is the coupled response of a tension leg platform (TLP) for random waves. Inferred are the mass matrix, coupling stiffness matrix, damping matrix in the vibration differential equation and external load of TLP in moving coordinating system. Infinitesimal method is applied to divide columns and pontoons into small parts. Time domain motion equation is solved by Runge-Kutta integration scheme. Jonswap spectrum is simulated in the random wave, current is simulated by linear interpolation, and NPD spectrum is applied as wind spectrum. The Monte Carlo method is used to simulate random waves and fluctuated wind. Coupling dynamic response, change of tendon tension and riser tension in different sea conditions are analyzed by power spectral density (PSD). The influence of approach angle on dynamic response of TLP and tendon tension is compared.     

Coupled dynamic analysis for wave interaction with a truss spar and its mooring line/riser system in time domain

A full time-domain analysis program is developed for the coupled dynamic analysis of offshore structures. For the hydrodynamic loads, a time domain second order method is developed. In this approach, Taylor series expansions are applied to the body surface and free-surface boundary conditions, and the Stokes perturbation procedure is then used to establish the corresponding boundary value problems with time-independent boundaries. A higher-order boundary element method (HOBEM) is developed to calculate the velocity potential of the resulting flow field at each time step. The free-surface boundary condition is satisfied to the second order by fourth order Adams–Bashforth–Moultn method. An artificial damping layer is adopted on the free surface to avoid the wave reflection. The mooring-line/tendon/riser dynamics are based on the rod theory and the finite element method (FEM), with the governing equations described in a global coordinate system. In the coupled dynamic analysis, the motion equation for the hull and dynamic equations for mooring-lines/tendons/risers are solved simultaneously using the Newmark method. The coupled analysis program is applied for a truss Spar motion response simulation. Numerical results including motions and tensions at the top of mooring-lines/risers are presented, and some significant conclusions are derived.     

浮体二阶运动下钢悬链式立管触地区动态响应分析

浮体运动是引起钢悬链式立管(steel catenary riser,简称SCR)动态响应和疲劳损伤的关键因素,目前研究SCR问题时,为简化计算往往仅考虑平台一阶运动,忽略二阶运动影响。而实际上不同浮体结构的二阶运动响应特征明显,拟以SCR服役张力腿平台(tension leg platform,简称TLP)为例,探讨浮体二阶运动对SCR触地区动态响应的影响。建立考虑海床刚度退化的管土作用模型以改进现有的CABLE3D RSI程序,通过编写程序接口,将有限元分析得到的平台实际运动响应导入,研究平台不同运动作用下SCR触地区的位移、动力响应及疲劳分布情况。根据波流作用方向将TLP二阶慢漂运动分为近端和远端漂移两种工况,发现二阶运动下立管与海床的作用范围会增大,且触地区不仅发生高频小幅振荡运动,同时伴随低频大幅运动响应;平台远端漂移时,管内张力敏感程度高,而近端漂移时触地区的弯矩显著增大,都会不同程度提高触地区的疲劳损伤率。研究可为服役不同浮体的SCR响应预测与疲劳分析提供参考和借鉴。     

张力腿平台涡激运动模型试验与数值分析

为揭示张力腿平台涡激运动响应规律,采用数值模拟与模型试验相结合的方法研究了全水深系泊张力腿平台涡激运动响应。根据张力腿平台主尺度参数,按照几何相似制作了水池试验模型,在满足运动相似和动力相似的条件下开展了均匀流、剖面流模型试验,并将模型试验结果与数值模拟结果进行了对比,验证了数值模拟与模型试验结果的一致性。分析结果表明在均匀流作用下张力腿平台涡激运动的锁定区间在5.5<U_r<8.5,来流角对涡激运动影响较大。剖面流作用下平台涡激运动规律与均匀流作用基本一致,但剖面流造流引起的能量分散,使平台在XY平面的运动轨迹变得不规律,系泊系统提供的回复力对涡激运动幅值有抑制作用,来流角和流速对张力腿或立管模态影响明显。论文得到结论对于张力腿平台的工程设计有一定借鉴意义。     

Transient effects of tendon disconnection of a TLP by hull–tendon–riser coupled dynamic analysis

This paper deals with a numerical study of the transient effect of tendon disconnection on global performance of an extended tension leg platform (ETLP) during harsh environmental conditions of Gulf of Mexico (GoM). The ETLP has twelve tendons with twelve production top-tensioned risers (TTRs) and one drilling riser. The risers are attached by hydro-pneumatic tensioners. A time-domain nonlinear global-motion-analysis program for floating hulls coupled with risers/mooring lines is developed to model the transient effects associated with tendon disconnection at the top or the bottom. The sudden disconnection of one or more tendons causes the change of stiffness and natural periods, the imbalance of forces and moments of the total system, and possibly large transient overshoots in tension at the moment of disconnection. The breakage at the top and the unlatch at the bottom also make different impacts on the system. The transient responses and tensions are compared and discussed in the viewpoint of the robustness of the system. The survivability of a TLP with the loss of one or two tendons by accident during a lesser-than-extreme environment can also be checked by this kind of time-domain simulation technique.     

张力腿平台筋腱支撑浮筒结构设计研究

在张力腿平台筋腱与海底桩基连接后,需要筋腱支撑浮筒为筋腱提供足够的浮力,保证筋腱在平台运抵工作海域之前不会发生倾覆。针对南海油田自主研发的张力腿平台筋腱实际尺寸及设计要求,设计了适用于1 061 mm(40英寸)筋腱、500米水深的张力腿平台筋腱支撑浮筒,并对筋腱支撑浮筒主要受力进行了分析计算,根据所计算的载荷情况对关键部件进行了有限元仿真分析,验证了结构强度的可靠性,并得到了结构的应力集中点与最大变形点,为筋腱支撑浮筒的结构设计提供了参考。     

考虑多种非线性因素的张力腿平台动力响应

建立了一种考虑多种非线性因素的张力腿平台(TLP)分析模型,其中包括六自由度有限位移,各自由度之间的耦合,瞬时湿表面,瞬时位置,自由表面效应及粘性力等因素引起的非线性。推导出TLP六自由度非线性运动方程。对某典型张力腿平台ISSC TLP进行了时域上的数值计算,求得该平台在规则波作用下的六自由度运动响应。用退化到线性范围的解与已有解进行了对比,吻合良好。数值结果表明,综合考虑非线性因素后响应明显改变,建议在设计TLP平台的时候,考虑非线性因素的影响。     

台风下TLP立管系统可靠性评估

针对在南海海域频发的台风自然灾害,考虑海况随机性、结构随机性以及作业参数的随机性,采用梯度投影确定取样点的响应面法,分别建立P2D、D2P和P2P(P指生产立管,D指钻井立管)三种作业模式下TLP串行立管系统的结构极限状态方程。并在建立立管可靠性分析模型的基础上,确定一种立管可靠度计算方法。算例结合南海某TLP平台给出了上述方法的具体应用。研究表明,10年一遇台风情况下,P2D、D2P和P2P三种工况中生产立管系统的失效概率均小于0.001%,钻井立管系统的可靠度分别为0.016%和0.113%。在大于200年一遇的强台风情况下,P2P工况时的上下游生产立管系统失效概率均大于0.32%和0.018%。因此建议10年一遇台风情况下,停止钻井立管作业;在大于200年一遇的强台风情况下,停止生产立管作业。研究结果可为南海TLP立管系统可靠度评估及安全作业技术支持。     

风机基础TLP平台在波浪中运动性能的CFD数值分析

随着海上风能的开发向深水发展,支撑风机的载体平台越来越受到关注。在经济性与安全性、稳定性的多重要求下,张力腿平台（TLP）在海洋风能资源的开发中体现出了重要地位。采用基于开源平台OpenFOAM开发的计算流体动力学（CFD）水动力学求解器naoe-FOAM-SJTU对一座处于中等水深下的风机基础水下TLP（STLP）的运动响应进行了数值模拟与研究。文中使用弹簧锚链模型模拟STLP的垂向系泊锁链系统,模拟该平台在不同波浪环境下的运动响应情况。首先将STLP单自由度自由衰减CFD模拟结果与已有全耦合时域分析结果进行对比,验证了naoe-FOAM-SJTU求解器及使用弹簧模型模拟STLP系泊系统的准确性与可靠性。随后在考虑非线性波浪载荷的情况下研究极端海况下与一般作业海况下STLP的运动响应情况,计算工况中的风机基础所受弯矩及锚链受力情况,并详细展示流场、速度场信息,分析高阶波浪成分、不同海况等条件对于STLP运动性能的影响。研究结果表明,TLP在中等水深中具有良好的运动性能,naoe-FOAM-SJTU求解器可以有效模拟水中生产平台在波浪环境下的水动力问题,并可以对整个流场进行可视化展示与分析。     

Coupled Dynamic Response Analysis of A Multi-Column Tension-Leg-Type Floating Wind Turbine

This paper presents a coupled dynamic response analysis of a multi-column tension-leg-type floating wind turbine (WindStar TLP system) under normal operation and parked conditions. Wind-only load cases, wave-only load cases and combined wind and wave load cases were analyzed separately for the WindStar TLP system to identify the dominant excitation loads. Comparisons between an NREL offshore 5-MW baseline wind turbine installed on land and the WindStar TLP system were performed. Statistics of selected response variables in specified design load cases (DLCs) were obtained and analyzed. It is found that the proposed WindStar TLP system has small dynamic responses to environmental loads and it thus has almost the same mean generator power output under operating conditions as the land-based system. The tension mooring system has a sufficient safety factor, and the minimum tendon tension is always positive in all selected DLCs. The ratio of ultimate load of the tower base fore-aft bending moment for the WindStar TLP system versus the land-based system can be as high as 1.9 in all of the DLCs considered. These results will help elucidate the dynamic characteristics of the proposed WindStar TLP system, identify the difference in load effect between it and land-based systems, and thus make relevant modifications to the initial design for the WindStar TLP system.     

张力腿平台局部节点强度可靠度分析方法

局部节点可靠度分析对张力腿平台(TLP)整体安全性评估具有重要意义。提出了一个TLP平台局部节点可靠度的分析方法,首先对TLP平台整体进行分析,统计局部节点各种失效模式并得到典型失效模式及对应的典型荷载工况;然后应用改进的子模型技术对TLP平台局部节点进行极限承载能力分析,确定了局部节点在典型荷载工况下的极限承载力;对局部节点极限承载力及南海某区域的波浪荷载进行统计分析,得到其概率统计特性;在此基础上计算了TLP平台局部节点对应典型失效模式下的可靠度指标。通过算例分析表明,该TLP平台各节点可靠度指标值均大于3.1;立柱与浮箱连接节点在不同荷载工况下失效模式不同,而立柱与甲板连接节点易发生管交汇处剪切破坏。为TLP平台的安全性评估提供了一种有效的分析方法,具有一定的理论价值及实用价值。     

Coupled dynamic analysis of a mini TLP: Comparison with measurements

The dynamically coupled interaction between the hull of a floating platform and its risers and tendons plays an important role in the global motions of the platform and the tension loads in the tendons and risers. This is an especially critical design issue in the frequency ranges outside the wave frequencies of significant energy content. This study examines the importance of this coupled dynamic interaction and the effectiveness of different approaches for their prediction. A numerical code, named COUPLE, has been developed for computing the motions and tensions pertaining to a moored floating structure positioned and restrained by its mooring/tendon and riser systems. In this study the experimentally measured motions of a mini-TLP are compared with those computed using COUPLE and alternative predictions based upon quasi-static analysis. The comparisons confirm that COUPLE is able to predict the dynamic interaction between the hull and its tendon and riser systems while the related quasi-static analysis fails. The comparisons also show that wave loads on the mini-TLP can be accurately predicted using the Morison equation provided that the wavelength of incident waves is much longer than the diameters of the columns and pontoons and that the wave kinematics used are sufficiently accurate. Although these findings are based upon the case of a mini-TLP, they are expected to be relevant to a wide range of floating or compliant deepwater structures.     

Numerical Prediction of Vortex Induced Vibrations on Top Tensioned Riser in Consideration of Internal Flow

In consideration of the effect of the internal flowing fluid and the external marine environmental condition on the vortex-induced vibration （VIV） of top tensioned riser （Till）, the differential equation is derived based on work-energy principles and the riser near wake dynamics is modeled by Facchinetti＇ s wake oscillator model. Then Galerkin＇ s finite element approximation is implemented to derive the nonlinear matrix equation of the coupled equations and file corresponding numerical programs are compiled which solve the coupled equations directly in the time domain. The comparison of the predicted results with the recent experimental results and the prediction of SHEAR7 is performed. The results show the validity of the proposed method on the prediction of VIV of deep water risers. The effect of internal flow on the dynamic characteristics and dynmnic response of the riser is analyzed and several valuable conelusions are drawn.     

Numerical Prediction of Vortex-Induced Vibrations on Top Tensioned Riser in Consideration of Internal Flow

In consideration of the effect of the internal flowing fluid and the external marine environmental condition on the vortex-induced vibration (VIV) of top tensioned riser (TTR), the differential equation is derived based on work-energy principles and the riser near wake dynamics is modeled by Facchinetti''s wake oscillator model.Then Galerkin''s finite element approximation is implemented to derive the nonlinear matrix equation of the coupled equations and the corresponding numerical programs are compiled which solve the coupled equations directly in the timedomain. The comparison of the predicted results with the recent experimental results and the prediction of SHEAR7is performed. The results show the validity of the proposed method on the prediction of VIV of deep water risers.The effect of internal flow on the dynamic characteristics and dynamic response of the riser is analyzed and severalvaluable conclusions are drawn.     

基于水平湿拖的TLP平台张力腿现场扶正数值模拟

TLP平台张力腿安装方法有竖直安装和水平安装。以一TLP平台张力腿为例,基于张力腿水平湿拖安装方法,采用OrcaFlex软件建立扶正分析模型,数值模拟了张力腿现场扶正过程,研究分析了张力腿在不同海洋环境和吊机缆绳释放速度等参数下的动力响应,并在此基础上进行了集束扶正分析,根据安装接受标准确定了合适的扶正作业天气窗口。模拟分析结果表明:在扶正过程中,浪向/流向、波高、流速对张力腿应力影响显著;吊机缆绳张力对浪向/流向、流速敏感;吊机缆绳释放速度对张力腿应力和吊机缆绳张力影响微弱。     

Numerical simulations and model tests of the mooring characteristic of a tension leg platform under random waves

Analyzing the dynamic response and calculating the tendon tension of the mooring system are necessary for the structural design of a tension leg platform （TLP）. The six-degree-of-freedom dynamic coupling responses and the mooring characteristics of TLP under random waves are studied by using a self-developed program. Results are verified by the 1：40 scaling factor model test conducted in the State Key Laboratory of Ocean Engineering at Shanghai JiaoTong University. The mean, range, and standard deviation of the numerical simulation and model test are compared. The influences of different sea states and wave approach angles on the dynamic response and tendon tension of the mooring system are investigated. The acceleration in the center and corner of the deck is forecasted.     

自由站立式立管总体运动疲劳分析

由于良好的疲劳特性,自由站立式立管(FSHR)正广泛应用于深海油气田的开发当中。首先根据设计参数建立FSHR详细的有限元模型,然后利用谱分析方法对FSHR进行总体运动疲劳分析,以确定FSHR总体设计参数是否满足运动疲劳要求。最后对工作于相同环境下的钢悬链立管(SCR)进行总体运动疲劳分析,探讨哪种立管系统的疲劳性能更为优良。计算结果表明FSHR系统中刚性主管最大运动疲劳损伤出现在刚性主管顶部,FSHR总体设计参数满足规范要求;FSHR总体运动疲劳寿命要远大于SCR,体现了FSHR系统对浮体运动与刚性主管之间具有良好的解耦作用。     

海洋立管综合环境条件设计标准研究

首先用有限单元法推导海洋输液立管在外界环境荷载条件下的侧向振动微分方程。对渤海某海区的15次风暴过程作了抽样分析，得到以波高为主时的波高、流速序列和以流速为主时的波高、流速序列，并对其进行了Weibull、Gumbel、Lognormal等适线分析，以确定各序列的最优分布形式及相应的特征值。用重点抽样法进行随机模拟得到联合概率为百年一遇的波高的流速。针对线海固定式平台铰接的海洋输液立管，以最大应力为控制条件确定其联合设计标准，并与其它方法作了比较，得到一些有益的结论。     

Hull/mooring/riser coupled dynamic analysis and sensitivity study of a tanker-based FPSO

A computer program is developed for hull/mooring/riser coupled dynamic analysis of a tanker-based turret-moored FPSO (Floating Production Storage and Offloading) in waves, winds, and currents. In this computer program, the floating body is modeled as a rigid body with six degrees of freedom. The first- and second-order wave forces, added mass, and radiation damping at various yaw angles are calculated from the second-order diffraction/radiation panel program WAMIT. The wind and current forces for various yaw angles of FPSO are modeled following the empirical method suggested by OCIMF (Oil Company International Marine Forum).

The mooring/riser dynamics are modeled using a rod theory and finite element method (FEM), with the governing equations described in a generalized coordinate system. The dynamics of hull, mooring lines, and risers are solved simultaneously at each time step in a combined matrix for the specified connection condition. For illustration, semi-taut chain-steel wire-chain mooring lines and steel catenary risers are employed and their effects on global FPSO hull motions are investigated. To better understand the physics related to the motion characteristics of a turret-moored FPSO, the role of various hydrodynamic contributions is analyzed and assessed including the effects of hull and mooring/riser viscous damping, second-order difference-frequency wave-force quadratic transfer functions, and yaw-angle dependent wave forces and hydrodynamic coefficients. To see the effects of hull and mooring/riser coupling and mooring/riser damping more clearly, the case with no drag forces on those slender members is also investigated. The numerical results are compared with MARIN's wave basin experiments.