New insights on the origin of troctolites from the breakaway area of the Godzilla Megamullion (Parece Vela back‐arc basin): The role of melt‐mantle interaction on the composition of the lower crust

The troctolites and olivine‐gabbros from the Dive 6 K‐1147 represent the most primitive gabbroic rocks collected at the Godzilla Megamullion, a giant oceanic core complex formed at an extinct spreading segment of the Parece Vela back‐arc basin (Philippine Sea). Previous investigations have shown that these rocks have textural and major elements mineral compositions consistent with a formation through multistage interaction between mantle‐derived melts and a pre‐existing ultramafic matrix. New investigations on trace element mineral compositions basically agree with this hypothesis. Clinopyroxenes and plagioclase have incompatible element signatures similar to that of typical‐MORB. However, the clinopyroxenes show very high Cr contents (similar to those of mantle clinopyroxene) and rim having sharply higher Zr/REE ratios with respect to the core. These features are in contrast with an evolution constrained by fractional crystallization processes, and suggest that the clinopyroxene compositions are controlled by melt‐rock interaction processes. The plagioclase anorthite versus clinopyroxene Mg#[Mg/(Mg + Fe^Tot)] correlation of the Dive 6 K‐1147 rocks shows a trend much steeper than those depicted by other oceanic gabbroic sections. Using a thermodynamic model, we show that this trend is reproducible by fractionation of melts assimilating 1 g of mantle peridotite per 1 °C of cooling. This model predicts the early crystallization of high Mg# clinopyroxene, consistent with our petrological observation. The melt‐peridotite interaction process produces Na‐rich melts causing the crystallization of plagioclase with low anorthite component, typically characterizing the evolved gabbros from Godzilla Megamullion.     

The effect of a hydrous phase on P‐wave velocity anisotropy within a detachment shear zone in the slow‐spreading oceanic crust: A case study from the Godzilla Megamullion,Philippine Sea

We studied the contributions of plagioclase, clinopyroxene, and amphibole to the P‐wave velocity properties of gabbroic mylonites of the Godzilla Megamullion (site KH07‐02‐D18) in the Parece Vela Rift of the central Parece Vela Basin, Philippine Sea, based on their crystal‐preferred orientations (CPOs), mineral modes, and elastic constants and densities of single crystals. The gabbroic mylonites have been classified into three types based on their microstructures and temperature conditions: HT1, HT2 and medium‐temperature (MT) mylonites. The P‐wave velocity properties of the HT1 mylonite are dominantly influenced by plagioclase CPOs. Secondary amphibole occurred after deformation in the HT1 mylonite, so that its effect on P‐wave velocity anisotropy is minimal due to weak CPOs. Although the HT2 mylonite developed deformation microstructures in the three minerals, the P‐wave velocity properties of the HT2 mylonite are essentially isotropic, resulting from the destructive interference of different P‐wave velocity anisotropy patterns produced by the distinct CPOs of the three constituent minerals (i.e., plagioclase, clinopyroxene, and amphibole). The P‐wave velocity properties of the MT mylonite are influenced mainly by amphibole CPOs, whereas the effect of plagioclase CPOs on P‐wave velocity anisotropy becomes very small with a decrease in the intensity of plagioclase CPOs. As a result, the gabbroic mylonites tend to have weak P‐wave velocity anisotropy in seismic velocity, although their constituent minerals show distinct CPOs. Such weakness in the whole‐rock P‐wave velocity anisotropy could result from the destructive contributions of the different mineral CPOs with respect to the structural framework (foliation and lineation). These results show that amphibole has a high potential for P‐wave velocity anisotropy by aligning both crystallographically and dimensionally during deformation in the hydrous oceanic crust. The results also suggest that the effect of a hydrous phase on P‐wave velocity anisotropy within the detachment shear zone in a slow‐spreading oceanic crust varies depending on the degree of deformation and on the timing of hydrothermal activity.     

The Godzilla Megamullion,the largest oceanic core complex on the earth: a historical review

The Godzilla Megamullion is the largest known oceanic core complex (OCC) on the Earth, located in the Parece Vela Basin in the Philippine Sea. In this article, the history of Godzilla Megamullion study is reviewed for the first time, dividing it into three major phases: (i) the early studies done before Japan's extended continental shelf survey program; (ii) the studies during Japan's extended continental shelf survey program that discovered the OCC; and (iii) the studies by the post‐discovery cruises. The early studies included an interpretation of US nautical chart of the southwestern Pacific and the site surveys for Deep Sea Drilling Project cruises (DSDP Legs 6, 31 and 59). The early studies recognized the presence of the Parece Vela Rift, the extinct spreading axis of the Parece Vela Basin, and established the currently accepted model that the Philippine Sea evolved with eastward progression of backarc spreading and arc migration. The modern understanding of the Parece Vela Basin comes from Japan's extended continental shelf survey program. The program revealed the ultramafic petrology as well as a two‐stage evolution model of the basin. Following these results, the discovery of the Godzilla Megamullion was made in 2001. The studies by the post‐discovery cruises further revealed important characteristics of the OCC, such as the presence of abundant plagioclase‐bearing peridotite and the systematic temporal changes in both deformation microstructures and composition of plagioclase and amphibole in gabbroic mylonites and ultramylonites. Zircon U–Pb ages of gabboric and leucocratic rocks indicate that the terminal phase of Parece Vela Basin spreading was with a significant decline in spreading rate and asymmetry accompanying formation of the Godzilla Megamullion. The estimated denudation rate of the OCC was approximately 2.5 cm/yr; significantly slower than the previous estimate based on poorly constrained magnetic data.     

Ultrahigh-pressure metamorphic records hidden in zircons from amphibolites in Sulu Terrane, eastern China

Abstract The amphibolites occur sporadically as thin layers and blocks throughout the Sulu Terrane, eastern China. All analyzed amphibolite from outcrop and drill cores from prepilot drill hole CCSD‐PP1 and CCSD‐PP2, Chinese Continental Scientific Drilling Project in the Sulu Terrane, are retrograded eclogites overprinted by amphibolite‐facies retrograde metamorphism, with characteristic mineral assemblages of amphibole + plagioclase + epidote ± quartz ± biotite ± ilmenite ± titanite. However, coesite and coesite‐bearing ultrahigh‐pressure (UHP) mineral assemblages are identified by Raman spectroscopy and electron microprobe analysis as inclusions in zircons separated from these amphibolites. In general, coesite and other UHP mineral inclusions are preserved in the cores and mantles of zircons, whereas quartz inclusions occur in the rims of the same zircons. The UHP mineral assemblages consist mainly of coesite + garnet + omphacite + rutile, coesite + garnet + omphacite, coesite + garnet + omphacite + phengite + rutile + apatite, coesite + omphacite + rutile and coesite + magnesite. Compositions of analyzed mineral inclusions are very similar to those of matrix minerals from Sulu eclogites. These UHP mineral inclusion assemblages yield temperatures of 631–780°C and pressures of ≥2.8 × 10³ MPa, representing the P–T conditions of peak metamorphism of these rocks, which are consistent with those (T = 642–726°C; P ≥ 2.8 × 10³ MPa) deduced from adjacent eclogites. These data indicate that the amphibolites are the retrogressive products of UHP eclogites.     

Alteration processes recorded by back-arc mantle peridotites from oceanic core complexes,Shikoku Basin,Philippine Sea

We determined the mineralogical and petrological characteristics of ultramafic rocks dredged from two oceanic core complexes: the Mado Megamullion and 23°30′N non-transform offset massif, which are located within the Shikoku back-arc basin in the Philippine Sea. The ultramafic rocks are strongly serpentinized, but can be classified as harzburgite/lherzolite or dunite, based on relict primary minerals and their pseudomorphs. Strongly elongated pyroxene porphyroclasts with undulatory extinction indicate high-temperature (≥700 °C) strain localization on a detachment fault within the upper mantle at depths below the brittle–viscous transition. During exhumation, the peridotites underwent impregnation by magmatic or hydrothermal fluids, lizardite/chrysotile serpentinization at ≤300 °C, antigorite crystallization, and silica metasomatism that formed talc. These features indicate that the detachment fault zones formed a fluid pathway and facilitated a range of fluid–peridotite interactions.     

Relicts of deformed lithospheric mantle within serpentinites and weathered peridotites from the Godzilla Megamullion,Parece Vela Back‐arc Basin,Philippine Sea

Relicts of deformed lithospheric mantle have been identified within serpentinites and weathered peridotites recovered from nine dredge sites and one submersible dive site from across the Godzilla Megamullion, which was emplaced at the now‐extinct Parece Vela Rift in the Parece Vela Basin, a back‐arc basin in the Philippine Sea. The serpentinites consist dominantly of lizardite ± chrysotile and magnetite with minor relict primary minerals that include pyroxene, spinel, and rare olivine. The weathered peridotites consist of pyroxene, spinel, lizardite ± chrysotile, and magnetite as well as weathering products of olivine. These rocks were classified in hand specimen into three types with different structures: massive, foliated, and mylonitic. In thin‐section the serpentine minerals show no sign of deformation, whereas relict primary minerals show evidence of plastic deformation such as undulose extinction, kink bands, dynamic recrystallization, and weak to moderate crystallographic preferred orientations. Therefore, the serpentinites and weathered peridotites result from the static replacement and weathering of previously ductile‐deformed peridotite. Given their location close to or on the detachment surface that exposed them, the relicts of peridotite provide evidence of deformation in the lithospheric mantle that could be related to the formation and emplacement of the Godzilla Megamullion in the Parece Vela Rift.     

Hydrothermal alteration of plagioclase microphenocrysts and glass in basalts from the East Pacific Rise near 13°N: An SEM-EDS study

The interactions of seafloor hydrothermal fluid with igneous rocks can result in leaching elements from the rocks,creating potential ore-forming fluids and influencing the chemical compositions of near-bottom seawater.The hydrothermal alteration of plagioclase microphenocrysts and basaltic glass in the pillow basalts from one dredge station(103°57.62′′W,12°50.55′N,water depth 2480 m)on the East Pacific Rise(EPR)near 13°N were analyzed using a scanning electron microscope(SEM)and energy dispersive X-ray spectrometry(EDS).The results show that the edges of the plagioclase microphenocrysts and the basaltic glass fragments are altered but the pyroxene and olivine microphenocrysts in the interior of the pillow basalts appear to be unaffected by the hydrothermal fluids.In addition,our results show that the chemical alteration at the rims of the plagioclase microphenocrysts and the edges of basaltic glass fragments can be divided into separate types of alteration.The chemical difference in hydrothermal alteration of the plagioclase microphenocrysts and the basaltic glass indicate that different degrees of hydrothermal fluid-solid phase interaction have taken place at the surface of the pillow basalts.If the degree of hydrothermal fluid-solid phase interaction is relatively minor,Si,Al,Ca and Na diffuse from the inside of the solid phase out and as a result these elements have a tendency to accumulate in the edge of the plagioclase microphenocrysts or basaltic glass.If the degree of hydrothermal fluid-solid phase interaction is relatively strong,Si,Al,Ca and Na also diffuse from the inside of solid phase out but these elements will have a relatively low concentration in the edge of the plagioclase microphenocrysts or basaltic glass.Based on the chemical variation observed in the edges of plagioclase microphenocrysts and basaltic glass,we estimate that the content of Si,Al and Fe in the edges of plagioclase microphenocrysts can have a variation of 10.69%,17.59%and 109%,respectively.Similarly,the Si,Al and Fe concentrations in the edges of basaltic glass can have a variation of 9.79%,16.30%and 37.83%,respectively,during the interaction of hydrothermal fluids and seafloor pillow basalt.     

Evolution of oceanic gabbros from DSDP Leg 82: influence of the fluid phase on metamorphic crystallizations

Gabbro breccias were recovered from an anomalously shallow level of the ocean crust during DSDP Leg 82. The rocks display evidence of metamorphic crystallization related either to localized deformation or to hydrothermal circulation of a seawater-derived fluid under static conditions. Secondary phases consist of plagioclase, amphibole and minor clinopyroxene, ilmenite, sphene and chlorite. Petrological study indicates that deformation took place at high temperature, under anhydrous conditions, and was followed by hydrothermal circulation. The compositions of secondary minerals (i.e. strong zonations, presence of chlorine in amphiboles, varying compositions of secondary plagioclase) indicate that reactions of the gabbros with the fluids occurred at a low water/rock ratio. Relations between Cl, Na and K in amphiboles suggest penetration of at least two distinct fluids of different compositions. Metamorphic crystallization stopped when greenschist facies conditions were reached( 350°C), probably because hydrothermal circulation faded out.     

Lateral variations in the lithology and organic chemistry of a black shale sequence on the Mesoarchean seafloor affected by hydrothermal processes: The Dixon Island Formation of the coastal Pilbara Terrane,Western Australia

The Dixon Island Formation of the coastal Pilbara Terrane, Western Australia is a 3.2 Ga volcanic–sedimentary sequence influenced by syndepositional hydrothermal activity formed in an island‐arc setting. We documented lateral variations in stratigraphy, hydrothermal alteration, and biological activity recorded in the sedimentary rocks (over several kilometers), with the aim of identifying areas of biological activity and related small‐scale structures. The Dixon Island Formation comprises volcaniclastics, black chert, and iron‐rich chert within seven tectonic blocks. Based on detailed geological mapping, stratigraphic columns, carbon isotope composition, and organic carbon (C_org) content, we found lateral (>5 km) variations in stratigraphy and carbon isotope compositions in a black chert sequence above the Mesoarchean seafloor with hydrothermal activity. Two felsic tuff layers are used as stratigraphic marker beds within a black chert sequence, which was deposited on altered volcanic rocks. The black chert sequence in each tectonic block is 10–20 m thick. Thickness variations reflect topographical undulations in the paleo‐ocean floor due to faulting. Early‐stage normal faults indicate extensional conditions after hydrothermal activity. Black chert beds in the topographically subsided area contain higher C_org contents (about 0.4 wt%) than in areas around the depression (<0.1 wt%). Carbon isotope compositions for the black chert vary from ?40 to ?25‰, which are similar to values obtained for a black chert vein within the komatiite–rhyolite tuff sequence (underlying the black chert sequence). Those for other rock types in the Dixon Island Formation are ?33 to ?15‰. Results indicate that deformation occurred soon after the final stages of hydrothermal activity. After this early‐stage deformation, organic‐rich sediments were deposited over an area several kilometers across. The organic‐rich sediments indicate stagnant anoxic conditions that resulted in the deposition of siliceous and organic matter from hydrothermal vein systems. When hydrothermal activity terminated, normal faulting occurred and organic matter was deposited from the sea surface and silica from the seafloor.     

Petrochemistry and tectonic setting of mafic volcanic rocks in the Chon Daen–Wang Pong area,Phetchabun, Thailand

The mafic volcanic rocks and hypabyssal rocks in the Chon Dean‐Wang Pong area are possibly the southern extension of the western Loei Volcanic Sub‐belt, Northeast Thailand. They are least‐altered, and might have been formed in Permian–Triassic times. The rocks are commonly porphyritic, with different amounts of plagioclase, clinopyroxene, orthopyroxene, amphibole, Fe–Ti oxide, unknown mafic mineral, and apatite phenocrysts or microphenocrysts, and are uncommonly seriate textured. The groundmass mainly shows an intergranular texture, with occasionally hyalophitic, intersertal and ophitic–subophitic textures. The groundmass constituents have the same minerals as the phenocrysts or microphenocrysts and may contain altered glass. The groundmass plagioclase laths may show a preferred orientation. Chemically, the studied rock samples can be separated into three magmatic groups: Group I, Group II, and Group III. These magmatic groups are different in values for Ti/Zr ratios. The averaged Ti/Zr values for Group I, Group II, and Group III rocks are 83 ± 6, 46 ± 12, and 29 ± 5, respectively. In addition, the Group I rocks have higher P/Zr, but lower Zr/Nb relative to Group II and Group III rocks. The Group I and Group II rocks comprise tholeiitic andesite–basalt and microdiorite–microgabbro, while the Group III rocks are calc‐alkalic andesite and microdiorite. According to the magmatic affinities and the negative Nb anomalies on normal mid‐oceanic ridge basalt (N‐MORB) normalized multi‐element plot, arc‐related lavas are persuasive. The similarity between the studied lavas and the Quaternary lavas from the northern Kyukyu Arc, in terms of chondrite‐normalized rare earth element (REE) patterns and N‐MORB normalized multi‐element patterns, leads to a conclusion that the mafic volcanic rocks and hypabyssal rocks in the Chon Daen–Wang Pong area have been formed in a volcanic arc environment.     

Amphibolitized sheared gabbros from ophiolites as indicators of the evolution of the oceanic crust: Bay of Islands,Newfoundland

In the Bay of Islands ophiolite complex both the basal part of the cumulate gabbro sequence and the underlying peridotites have been plastically deformed. Higher in the series the cumulate gabbros are undeformed except in localized shear zones slightly to strongly oblique to the layering. The resulting shear bands are narrow and composed either of mylonitic amphibole-bearing gabbros or of highly foliated amphibolites.The amphibole composition and nature, and the chemistry of coexisting minerals combined with structural evidence imply that a first episode of shearing subhorizontal in the crust occurred at decreasing temperatures ranging from 750 to 450°C. This shearing probably represent the response of the lithosphere to stresses also responsible of asthenospheric flow in the upper mantle. A second episode of shearing oblique to the first one and probably related to cooling of the crust away from the ridge, occurred at lower temperatures ranging from 500 to 300°C. The surrounding gabbros have undergone static hydrothermal metamorphism at temperatures decreasing from 650 to 450°C. All metamorphic events occurred in hydrous conditions in the vicinity of the ridge axis.     

Mineral chemistry and geothermobarometry of Moshirabad pluton,Qorveh, Kurdistan,western Iran

The Moshirabad pluton is located southwest of the Sanandaj–Sirjan Metamorphic Belt, Qorveh, western Iran. The pluton is composed of diorite, monzodiorite, quartz diorite, quartz monzodiorite, tonalite, granodiorite, granite, aplite, and pegmatite. In this study 31 samples from various rocks were chosen for whole‐rock analyses and 15 samples from different lithologies were chosen for mineral chemical studies. The compositions of minerals are used to describe the nature of magma and estimate the pressure and temperature at which the Moshirabad pluton was emplaced. Feldspar compositions are near the binary systems in which plagioclase compositions range from An₅ to An₅₃ and alkali‐feldspar compositions range from Or₉₁ to Or₉₇. Mafic minerals in the plutonic rocks are biotite and hornblende. Based on the composition of biotites and whole‐rock chemistry, the Moshirabad pluton formed from a calc‐alkaline magma. Amphiboles are calcic amphiboles (magnesio‐hornblende or edenite). Temperatures of crystallization, calculated with the hornblende–plagioclase thermometer, range 550–750°C. These temperatures indicate that plutonic rocks have undergone some retrogressive changes in their mineral compositions. Aluminum‐in‐hornblende geobarometry indicates that the Moshirabad pluton was emplaced at pressures of 2.3–6.0 kbar, equal to depths of 7–20 km, but with consideration of regional geology, lower pressures than the above pressure range are more probable. Alteration of amphiboles can be the reason for some overestimation of pressures.     

Sr–Nd isotope ratios of gabbroic and dioritic rocks in a Cretaceous-Paleogene granite terrain, Southwest Japan

Abstract Whole‐rock chemical and Sr and Nd isotope data are presented for gabbroic and dioritic rocks from a Cretaceous‐Paleogene granitic terrain in Southwest Japan. Age data indicate that they were emplaced in the late Cretaceous during the early stages of a voluminous intermediate‐felsic magmatic episode in Southwest Japan. Although these gabbroic and dioritic rocks have similar major and trace element chemistry, they show regional variations in terms of initial Sr and Nd isotope ratios. Samples from the South Zone have high initial ⁸⁷Sr/⁸⁶Sr (0.7063–0.7076) and low initial Nd isotope ratios (?_Nd, ?2.5 to ?5.3); whereas those from the North Zone have lower initial ⁸⁷Sr/⁸⁶Sr (usually less than 0.7060) and higher Nd isotope ratios (?_Nd, ?0.8 to + 3.3). Regional variations in Sr and Nd isotope ratios are similar to those observed in granitic rocks, although gabbroic and dioritic rocks tend to have slightly lower Sr and higher Nd isotope ratios than granitic rocks in the respective zones. Limited variations in Sr and Nd isotope ratios among samples from individual zones may be attributed partly to a combination of upper crustal contamination and heterogeneity of the magma source. Contamination of magmas by upper crustal material cannot, however, explain the observed Sr and Nd isotope variations between samples from the North and South Zones. Between‐zone variations would reflect geochemical difference in magma sources. The gabbroic and dioritic rocks are enriched in large ion lithophile elements (LILE) and depleted in high field strength elements (HFSE), showing similar normal‐type mid‐ocean ridge basalt (N‐MORB) normalized patterns to arc magmas. Geochronological and isotopic data may suggest that some gabbroic and dioritic rocks are genetically related to high magnesian andesite. Alternatively, mantle‐derived mafic or intermediate rocks which were underplated beneath the crust may be also plausible sources for gabbroic and dioritic rocks. The magma sources (the mantle wedge and lower crust) were isotopically more enriched beneath the South Zone than the North Zone during the Cretaceous‐Paleogene. Sr and Nd isotope ratios of the lower crustal source of the granitic rocks was isotopically affected by mantle‐derived magmas, resulting in similar initial Sr and Nd isotope ratios for gabbroic, dioritic and granitic rocks in each zone.     

The gabbroic rocks of the Peninsular ranges batholith, Southern California: cumulate rocks associated with calc-alkalic basalts and andesites

Gabbroic rocks occur only in the west, and are the oldest intrusions in the Peninsular Ranges Cordilleran batholith. They comprise an olivine-pyroxene gabbronorite series and an amphibole gabbro series both of which contain abundant plagioclase and amphibole. They formed by crystal accumulation and in situ differentiation, in multiple intrusive complexes, and are not considered to be related by fractionation to the granitoid rocks of the batholith.Pure mineral separates of plagioclase, olivine, clinopyroxene, orthopyroxene, and amphibole were obtained by magnetic and heavy-liquid methods from a representative suite of gabbroic rocks. Their major- and trace-element contents were determined by X-ray fluorescence, and the data used to test hypotheses on the genesis and fractionation of the gabbros.The plagioclases range from An₉₈ to An₆₅ in composition, olivines, Fo₇₉ to Fo₇₀, occur in rocks where An>₃₆. All clinopyroxenes are augite with Mg #'s varying from 81.1 to 64.7. Orthopyroxene occurs where An<₉₂, and is generally inverted pigeonite or bronzite, and has Mg #'s ranging from 77.9 to 52.1. The amphiboles include tschermakite, tschermakitic hornblende, pargasite, pargasitic hornblende, ferroan pargasite, magnesio-hornblende, and magnesio-taramite, Mg #'s range from 80.4 to 62.5. Systematic chemical and mineralogical changes confirm that differentiation, controlled by mineral assemblages of plagioclase, olivine, spinel, and clinopyroxene initially, and orthopyroxene, amphibole, and magnetite later, took place between intrusive episodes and in situ.The highly clacic plagioclase coexisting with olivine and amphibole suggests that the gabbros were formed from hydrous mafic magmas. The modal mineralogy of the gabbros, and the chemistry of the minerals is very similar to that of the cumulate blocks of the Lesser Antillean volcanoes. These features confirm that the gabbros were derived from a hydrous mafic magma, with high Al₂O₃ and low TiO₂ contents, typical of orogenic environments.Cumulate minerals from the gabbros show little or no zoning and are considered to have formed in equilibrium with the evolving melts. Selected trace-element contents and distribution coefficients are used to calculate the compositions of the melts. The calculations show that the melts in equilibrium with the olivine-pyroxene gabbronorite series contain approximately 100–200 ppm Ba, 200–400 ppm Sr, 30-10 ppm Ni, 20-10 ppm Co, and 300-100 ppm V. K/Rb ratios of the melts, derived from post-cumulus and prismatic amphiboles, are generally in the range 550-250. These values are typical of calc-alkalic basalts and andesites, and it is suggested that they may have erupted at the surface to form a coeval calc-alkalic volcanic sequence.     

Lithium and lithium isotope profiles through the upper oceanic crust: a study of seawater-basalt exchange at ODP Sites 504B and 896A

Ocean Drilling Program (ODP) Hole 504B near the Costa Rica Rift is the deepest hole drilled in the ocean crust, penetrating a volcanic section, a transition zone and a sheeted dike complex. The distribution of Li and its isotopes through this 1.8-km section of oceanic crust reflects the varying conditions of seawater alteration with depth. The upper volcanic rocks, altered at low temperatures, are enriched in Li (5.6-27.3 ppm) and have heavier isotopic compositions (δ⁷Li=6.6-20.8‰) relative to fresh mid-ocean ridge basalt (MORB) due to uptake of seawater Li into alteration clays. The Li content and isotopic compositions of the deeper volcanic rocks are similar to MORB, reflecting restricted seawater circulation in this section. The transition zone is a region of mixing of seawater with upwelling hydrothermal fluids and sulfide mineralization. Li enrichment in this zone is accompanied by relatively light isotopic compositions (−0.8-2.1‰) which signify influence of basalt-derived Li during mineralization and alteration. Li decreases with depth to 0.6 ppm in the sheeted dike complex as a result of increasing hydrothermal extraction in the high-temperature reaction zone. Rocks in the dike complex have variable isotopic values that range from −1.7 to 7.9‰, depending on the extent of hydrothermal recrystallization and off-axis low-temperature alteration. Hydrothermally altered rocks are isotopically light because ⁶Li is preferentially retained in greenschist and amphibolite facies minerals. The δ⁷Li values of the highly altered rocks of the dike complex are complementary to those of high-temperature mid-ocean ridge vent fluids and compatible to equilibrium control by the alteration mineral assemblage. The inventory of Li in basement rocks permits a reevaluation of the role of oceanic crust in the budget of Li in the ocean. On balance, the upper 1.8 km of oceanic crusts remains a sink for oceanic Li. The observations at 504B and an estimated flux from the underlying 0.5 km of gabbro suggest that the global hydrothermal flux is at most 8×10⁹ mol/yr, compatible with geophysical thermal models. This work defines the distribution of Li and its isotopes in the upper ocean crust and provides a basis to interpret the contribution of subducted lithosphere to arc magmas and cycling of crustal material in the deep mantle.     

A 100 m.y. record of volcanic arc evolution in Nicaragua

The processes that result in arc magmas are critical to understanding element recycling in subduction zones, yet little is known about how these systems evolve with time. Nicaragua provides an opportunity to reconstruct the history of a volcanic arc since the Cretaceous. Here we present the stratigraphy of the Cretaceous–Eocene volcanic units in Nicaragua and their relationship to the different tectonic units where the arc developed. We discovered an evolution from an arc‐dominated by calc‐alkaline compositions in the Cretaceous–Eocene, to transitional compositions in the Oligocene–Miocene, to finally tholeiitic magmas common in the modern volcanic front. Our petrographic studies confirm that in the Cretaceous–Eocene the olivine + clinopyroxene cotectic was followed by clinopyroxene + plagioclase ± amphibole. Given the abundance of amphibole and the lack of this mineral in the modern volcanic front, the Cretaceous–Eocene Arc melts were likely more water‐rich than modern Nicaragua, suppressing the crystallization of plagioclase after olivine. We also found temporal changes in element ratios that are sensitive to variations in sediment input. The Cretaceous–Eocene Arc is characterized by a lower Ba/Th compared to the Oligocene–Miocene and modern volcanic front samples, suggesting that the sediment input was lower in Ba, possibly analogous to old deep siliceous sediment subducting in the western Pacific. Both U/Th and U/La are higher in the modern volcanics, reflecting higher U/Th in the subducting sediments following the 'Carbonate Crash'. Finally, we found that the orientation of the arc axis also changed, from northeast‐southwest in the Cretaceous–Eocene to northwest‐southeast after the Oligocene. This change probably records variations in the location of the subduction zone as this region shaped into its current geographic configuration.     

Shock metamorphism of plagioclase and amphibole (Experimental data)

The shock metamorphism of plagioclase and amphibole of various chemical compositions from amphibolite and granulite facies schists was studied in experiments with shock wave loading of samples in steel recovery ampoules of plane geometry. A maximum shock pressure was reached after a few circulations of waves in the sample (stepwise shock wave compression) and varied within 26–52 GPa. The recovered samples were examined by the methods of scanning electron microscopy and microprobe and X-ray phase analysis. It is established that an increase in the F, Ti, and K concentrations in amphibole and a decrease in the Ca concentration in plagioclase make these minerals more stable with respect to shock waves. It is shown that the migration of some chemical elements, starting already at the solid phase stage of transformation in plagioclase and amphibole, is intensified at the stage of melting. It is established that isotropization of plagioclase occurs through two different mechanisms. At relatively low pressures, it is caused by the fragmentation of substance at the microlevel and is accompanied by the formation of maskelynite, a typical mineral of meteorites and astrobleme rocks. At higher pressures, isotropization is associated with melting-induced amorphization.     

Occurrence of Alaskan-type mafic-ultramafic intrusions in the North Qilian Mountains, northwest China: Evidence of Cambrian arc magmatism on the Qilian Block

Field relationships, mineralogy and petrology, whole‐rock chemistry, and age of the Zhamashi mafic–ultramafic intrusion in the North Qilian Mountains, northwest China, have been studied in the present work. The Zhamashi intrusive body consists of ultramafic, gabbroic, and dioritic rocks in a crudely concentrically zoned structure. The ultramafic rocks are layered cumulates with rock types varying continuously from dunite through wehrlite and olivine clinopyroxenite to clinopyroxenite. The gabbroic and dioritic rocks are also layered or massive cumulates with rock types varying continuously from noritic gabbro through hornblende gabbro to diorite. The ultramafic and adjoining gabbroic rocks are discontinuous in lithology and discordant in structure across the interface. The interface is steep, sharp, and fractured. Contact metamorphic zones are well developed between the Zhamashi intrusive body and the country rock. The concentrically zoned structure of the intrusive body and the intrusion into the continental crust are the two main pieces of evidence for considering that the Zhamashi intrusion is Alaskan‐type. The mineral chemistry of the chromian spinels (Cr‐spinels) and clinopyroxenes, and the variation trend of the whole‐rock compositional plot in the (Na₂O + K₂O)–FeO–MgO (AFM) diagram are also supportive of this consideration. The age of the Zhamashi intrusive body, determined with sensitive high mass‐resolution ion microprobe on the zircon grains, is 513.0 ± 4.5 Ma. Parental magma of the Zhamashi intrusion is compositionally close to the primitive magma produced by partial melting of the mantle peridotite. It was differentiated by fractional crystallization at low total pressure and under H₂O‐rich conditions in an arc environment to form all the major rock types. The concentrically zoned structure of the Zhamashi intrusive body was constructed in two stages: formation of a stratiform‐type layered sequence, followed by diapiric re‐emplacement. The occurrence of the Alaskan‐type intrusion suggests an active continental margin and Cambrian arc magmatism for the northern margin of the Qilian Block.     

Oxygen isotope evidence for submarine hydrothermal alteration of the Del Puerto ophiolite, California

The oxygen isotope compositions and metamorphic mineral assemblages of hydrothermally altered rocks from the Del Puerto ophiolite and overlying volcaniclastic sedimentary rocks at the base of the Great Valley sequence indicate that their alteration occurred in a submarine hydrothermal system. Whole rock δ¹⁸O compositions decrease progressively down section (with increasing metamorphic grade): +22.4‰ (SMOW) to +13.8 for zeolite-bearing volcaniclastic sedimentary rocks overlying the ophiolite; +19.6 to +11.6 for pumpellyite-bearing metavolcanic rocks in the upper part of the ophiolite's volcanic member; +12.3 to +8.1 for epidote-bearing metavolcanic rocks in the lower part of the volcanic member; +8.5 to +5.7 for greenschist facies rocks from the ophiolite's plutonic member; +7.6 to +5.8 for amphibolite facies or unmetamorphosed rocks from the plutonic member.

Modelling of fluid-rock interaction in the Del Puerto ophiolite indicates that the observed pattern of upward enrichment in whole rock δ¹⁸O can be best explained by isotopic exchange with discharging¹⁸O-shifted seawater at fluid/rock mass ratios near 2 and temperatures below 500°C.¹⁸O-depleted plutonic rocks necessarily produced during hydrothermal circulation were later removed as a result of tectonism. Submarine weathering and later burial metamorphism at the base of the Great Valley sequence cannot by itself have produced the zonation of hydrothermal minerals and the corresponding variations in oxygen isotope compositions. The pervasive zeolite and prehnite-pumpellyite facies mineral assemblages found in the Del Puerto ophiolite may reflect its origin near an island arc rather than deep ocean spreading center.     

Hydrothermal alteration in the Reykjanes geothermal system: Insights from Iceland deep drilling program well RN-17

The Reykjanes geothermal system is a seawater-recharged hydrothermal system that appears to be analogous to seafloor hydrothermal systems in terms of host rock type and low water/rock alteration. The similarities make the Reykjanes system a useful proxy for seafloor vents. At some time during the Pleistocene, the system was dominated by meteoric water recharge, and fluid composition at Reykjanes has evolved through time as a result of changing proportions of meteoric water influx as well as differing pressure and temperature conditions. The purpose of this study is to characterize secondary mineralization, degree of metasomatic alteration, and bulk composition of cuttings from well RN-17 from the Reykjanes geothermal system. The basaltic host rock includes hyaloclastite, breccia, tuff, extrusive basalt, diabase, as well as a marine sedimentary sequence. The progressive hydrothermal alteration sequence observed with increasing depth results from reaction of geothermal fluids with the basaltic host rock. An assemblage of greenschist facies alteration minerals, including actinolite, prehnite, epidote and garnet, occurs at depths as shallow as 350 m; these minerals are commonly found in Icelandic geothermal systems at temperatures above 250 °C (Bird and Spieler, 2004). This requires hydrostatic pressures that exceed the present-day depth to boiling point curve, and therefore must record alteration at higher fluid pressures, perhaps as a result of Pleistocene glaciation. Major, minor, and trace element profiles of the cuttings indicate transitional MORB to OIB composition with limited metasomatic shifts in easily mobilized elements. Changes in MgO, K₂O and loss on ignition indicate that metasomatism is strongly correlated with protolith properties. The textures of alteration minerals reveal alteration style to be strongly dependent on protolith as well. Hyaloclastites are intensely altered with calc-silicate alteration assemblages comprising calcic hydrothermal plagioclase, grandite garnet, prehnite, epidote, hydrothermal clinopyroxene, and titanite. In contrast, crystalline basalts and intrusive rocks display a range in alteration intensity from essentially unaltered to pervasive and nearly complete albitization of igneous feldspar and uralitization of clinopyroxene. Hydrothermal anorthite (An92–An98) occurs in veins in the most altered basalt cuttings and is significantly more calcic than igneous feldspar (An48–An79). Amphibole compositions change from actinolite to hornblende at depth. Hydrothermal clinopyroxene, which occurs in veins, has greater variation in Fe content and is systematically more calcic than igneous pyroxene and also lacks uralitic textures. Solid solutions of prehnite, epidote, and garnet indicate evolving equilibria with respect to aluminum and ferric iron.