Magsat anomaly data over the Kursk region,U.S.S.R.

A new method of reducing Magsat orbits was developed to produce a map of the Kursk magnetic anomaly at satellite altitude. Two different techniques to estimate the direction of magnetization were applied to the components of the anomaly to determine the presence of remanent magnetization. We propose that there is a significant component of remanent magnetization, however, we are unable to determine the importance of remanence relative to induced magnetization.     

Lake-ice collapse trenches in Wisconsin,U.S.A.

A series of trenches about a metre deep, 20 to 30 m wide, and as much as 2 km in length occurs in central Wisconsin, along the east shore of proglacial Lake Wisconsin. They are interpreted to be collapse trenches formed when shore ice melted after being buried beneath an expanding outwash plain.     

Ground Water Monitoring in the U.S.S.R.

Ground water monitoring is considered to be a significant component of the geological service in the U.S.S.R. Currently, the total number of ground water monitoring wells exceeds 30,000. They are divided into two categories, which are the first class, or basic observation wells, and the second class, or auxiliary observation wells. The main objectives of both monitoring networks are briefly described. The general scheme of ground water monitoring organization is also presented.     

Scapolite phenocrysts in a latite dome,northwest Arizona,U.S.A.

A latite dome in northwest Arizona contains a rare occurrence of primary SO₄-rich scapolite phenocrysts. The total phenocryst assemblage consists of plagioclase (An₂₀?An₃₃), hornblende, biotite, and scapolite (Me₆₈). Microphenocrysts include allanite and oxidized low-Ti magnetite. Electron microprobe analyses show that the scapolite contains about 1.74 wt.% S, which indicates an atomic S/(S + C) of 0.58. Although scapolite occurs in xenoliths in volcanic rocks and diatremes, as well as a metamorphic mineral in granulites, its occurrence as a primary igneous mineral is extremely rare.Ca-rich scapolite has been crystallized experimentally by others from melts with a wide range of SiO₂, CaO, and Na₂O contents, at temperatures above 825°C and pressures ranging from 3 to 15 kbar. Comparison of scapolite from this latite with synthetic scapolite crystallized from nepheline syenite melt suggests that the Arizona phenocrysts crystallized under conditions of 850 to 900°C, 3–6 kbar total pressure, and unusually high ?_CO2 and ?_SO2. The rarity of scapolite as a phenocryst mineral suggests that high partial pressures of CO₂ and SO₂ are rare in the magmatic environment.     

Hydrogeochemical processes involved in salt-dissolution zones,texas panhandle,U.S.A.

Permian evaporite deposits have been extensively dissolved beneath the perimeter of the Southern High Plains in the Texas Panhandle. Hydrologic and geochemical data were collected from six test wells to determine hydrogeochemical processes involved and the source and flow paths of ground water moving in salt-dissolution zones. Geochemical similarities and hydraulic-head relationships indicate that ground water dissolving halite and anhydrite moves downward from aquifers in post-Permian formations and follows flow paths influenced by topography. Holocene salt-dissolution rates probably are lower than Tertiary and Pleistocene rates owing to regional changes in physiography and climate that probably decreased the amount of recharge to salt-dissolution zones. Present as well as palaeohydrologic ground-water velocities and salt-dissolution rates are probably less beneath the Southern High Plains than in adjacent, peripheral salt-dissolution zones because of lower hydraulic conductivities and lower hydraulic-head gradients. Salinities in peripheral salt-dissolution zones are low (67 000 to 95 000 mg L^?1) despite high solubility of halite, reflecting relatively open circulation of ground water. In interior salt-dissolution zones beneath the Southern High Plains, ground-water circulation is low and water composition tends to reach halite saturation.     

A hydrogeochemical model for stream chemistry,Cascade range,Washington, U.S.A.

A simple mixing model demonstrates that chemical variations in Cascade surface waters reflect flow from three general zones: alpine areas, forested colluvial slopes, and seasonally saturated areas. The chemistry of weathering solutions in alpine portions of the Williamson Creek catchment (North Cascade Range) results from alteration of plagioclase, hornblende, and biotite to kaolinitic material and vermiculite. Surface and shallow groundwater in forested portions of the catchment reflect these reactions, dissolution of small quantities of carbonate, and biologic activity. Both at-a-point and downstream chemical variations are explained quantitatively by the volume of water that originates in each of the hydrogeochemical source areas. Water from the forested colluvial slopes is most significant on an annual basis. However, summer low-flow is a mixture of colluvial waters and dilute solutions from the alpine zone, whereas 10 to 30 per cent of peak flow in snowmelt and rainstorms is produced from seasonally saturated areas. Poor concentration/discharge (C/Q) correlations, typical of Cascade rivers, result from mixing of significant C/Q relations for water leaving each source area. Model predictions could be substantially improved by better data for the effects of temperature, water-contact time, and biologic cycling on the chemistry of soil water from forested zones.     

美国PBO计划:钻孔应变仪台网遭遇挑战

PBO(Plate Boundary Observatory)计划专门设计了一批钻孔应变仪台.网,在数百米距离内,安装2～3台仪器,以研究钻孔应变仪如何响应构造活动的信号,以及局部因素会造成何种干扰.本文收集了6个这样的台网的资料,给出了所有仪器数年的记录曲线,并对观测结果显示的地壳应变场做了简要的分析对比,发现6个试...     

Environmental controls on blowing dust direction at lubbock,Texas, U.S.A.

Blowing dust is a common phenomenon at Lubbock, Texas, on the Southern High Plains. The directional variability of blowing dust estimated with the ‘sand rose’ technique, using wind speed and direction data, suggest that dust transport occurs from all directions. An empirical method of determining directional variability using meteorological data on visibility reductions due to blowing dust, however, indicates that most dust comes from the west and south-west. In addition to wind speed and direction, other environmental factors must be considered in explaining the spatial pattern of dust transport. Soil erodibility is variable in the region, with the most extensive area of highly erodible soils to the west and south-west of Lubbock. Rangeland dominates land use to the east, while agriculture is extensive to the north, west and south. Local farming techniques leave bare soil during the winter and spring, when most airborne dust is produced and also when strong winds are common from the west and south-west. Soil moisture is lowest to the southwest of Lubbock, which leads to a decrease in soil structure and an increase in the potential for wind erosion in that direction. Relative humidities affect threshold wind speeds and are lowest during March and April, when winds are common from the west and south-west. The spatial and seasonal variability and interactions between many factors, both natural and human-controlled, must therefore considered in explaining the directional variability of aeolian sediment transport at Lubbock.     

Erosional effects of cattle on streambanks in Tennessee,U.S.A.

The geomorphological effects of cattle on streambanks in a humid region, which have consequent potential effects on water quality, are examined. Field observations suggest that cattle are important agents in causing streambanks to erode, but so many variables are involved that it is difficult to isolate the role of cattle. Instead, an empirical approach based on long-term controlled experiment was adopted along a small perennial stream in the Central Basin of Tennessee. The results showed that uncontrolled grazing caused about six times as much gross bank erosion as occurred on the protected control stretch. However, most of this difference was due to breakdown of banks by trampling and consequent erosion, rather than by bank scour caused by removal of bank vegetation by grazing. That is, bank vegetation alone did not appear to be a primary control. A relatively inexpensive grade-control structure reduced the gross bank erosion by about 50 per cent. The rapid destruction of streambanks observed in this study suggests that reduction of geomorphic resistance by uncontrolled stock access to streambanks has been an important factor in the stream widening that has taken place during historical time in the eastern United States.     

Temporal cycles of karst denudation in northwest Georgia,U.S.A.

Time patterns of karst denudation in northwest Georgia (U.S.A.) were investigated at three spring sites for 12 months and at five stream sites for 10 years. Rainfall was evenly distributed and showed no significant seasonality. At the springs, as well as the streams, water hardness was largely controlled by discharge. At the springs, soil pCO₂ and water pH were strongly correlated (r + -0·69 to -0·83). Solute transport in spring waters was highly seasonal, with two conduit flow springs removing more limestone in the winter, and the diffuse flow spring removing more during the growing season. At the stream sites, most denudation occurred during the winter and spring seasons, and least during the summer. Fourier analysis showed that variations in denudation occur on deterministic (long-wave) as well as stochastic (shortwave) time scales. As contributing variables, discharge varied in short-wave and long-wave cycles, whereas soil pCO₂ showed only a long-wave cycle. The 12 month deterministic cycles were the most important, with changes in discharge taking precedence over soil pCO₂. Time series regression explains up to 69 per cent of changes in denudation through rain and soil pCO₂. Time cycles in available water are the key controlling factor of denudation, and amounts of available soil CO₂ may not be as important in the temporal patterns of karst downwearing as has been believed previously.     

Primary fractures within a tuff cone, North Menan Butte, Idaho, U.S.A.

North Menan Butte is a tuff cone near Idaho Falls, Idaho. It is a result of the eruption of basaltic magma through shallow water-saturated river alluvium of the Snake River. The cone is characterized by primary fractures that can be classified into four groups on the basis of their physical properties and their orientations relative to the symmetry elements of the cone. Type I fractures are short, closely spaced and usually confined to individual beds. They strike approximately at right angles to cone radii and always dip toward the rim of the tuff cone. Bed segments separated by these fractures have undergone rotation, resulting in normal displacements. Type II fractures have similar attitudes but are more continuous, less frequent, and show no shear displacement. Type III fractures also strike at right angles to cone radii, but they dip away from the cone rim. They cut across several beds and reveal inconsistent senses of shear displacement. Type IV fractures are radial, steeply dipping and tend to be the most continuous of all fracture types. Type I fractures were the earliest to develop; age relationships otherwise are uncertain. Examples of all four types of fractures are exposed on the inner and outer eroded slopes of the cone.Evidence from the cone indicates that the fractures developed in an unconsolidated aggregate of tuff with low cohesion; therefore, analysis of fracture genesis should be constrained by principles of soil mechanics. Type I fractures originated as tension fractures related to early downslope mass movement. Later movement on Type I fractures accompanied the development of Type III shear fractures and possible bedding plane displacements, all caused by overloading the crest of the cone by late-stage eruptive products. The origin of Type II fractures is unknown; shrinkage due to desiccation or large-scale creep are possible explanations. The radial Type IV fractures may be a consequence of desiccation shrinkage or possibly of subcone processes such as magma doming or radial hydraulic fracturing.     

Observations of contemporary arroyo cutting near Santa Fe,New Mexico,U.S.A.

Arroyo cutting that began in the American Southwest in the 1880s is associated with sudden runoff, a circumstance characteristic of this semiarid region in which occasional intense rainfall exceeds the capacity of the ground to absorb water. This report describes two arroyos in an area of moderately dissected bolson deposits southwest of Santa Fe, Cañada de la Cueva and Pueblo Cañon, where arroyo cutting since 1970 has been closely related to runoff from summer rain. The area is vegetated chiefly by grama grass and scattered juniper. Cutting is monitored by repeated surveys of channel floors, cross-sections, and headcuts, and by repeated photographs taken as stereopairs. Rainfall and discharge are measured simultaneously in 5-minute intervals by dual digital recorders at a gauging station on Cañada de la Cueva (drainage area 4.64 km²). Discharge has been as much as 18.2 m³/s from rainfall of 25.2 mm. The maximum 15-minute intensity for this storm was 64.0 mm/hr, and runoff was 7.9 mm. The flood peak arrived in 20 minutes, by which time 80 per cent of the rain had fallen, and the flow subsided to a tenth of its maximum in less than an hour. This storm at Pueblo Cañon (drainage area 13.3 km² above the place of measurement) resulted in an estimated discharge of 140 m³/s, and features produced by hail on the channel floor suggest that the duration of flow could have been as brief as 30 minutes. Observed increments of headward cutting at Cañada de la Cueva range from 0.28 m for 1.8 mm of runoff to 4.9 m for 12 mm of runoff. Aggregate cutting in 5 years has been as much as 13.7 m, resulting in erosion of 570 m³ of alluvium. Headward cutting near the mouth of Pueblo Cañon has been observed in increments of 10.3, 14.6, and 20.7 m, for an aggregate of 45.6 m, as measured from 1971 to 1974. This cutting removed 1,770 m³ of alluvium.     

Microearthquake activity associated with underground coal-mining in Buchanan County,Virginia, U.S.A.

Microearthquake activity (impulsive, transient seismic events, with durations up to several seconds at a distance of 500 m, that exhibit a coda with a shift toward lower frequencies with increasing time) was monitored for a three-month period by a single seismograph sited directly above an undergound longwall mine in the coal-mining region of Buchanan County, Virginia, U.S.A. The purpose of this investigation was to determine if precursory increases in microseismicity prior to cavings (subsidence) of overburden in the mine were present and, if so, could they be detected by surface seismographic observations. The first two recording weeks were prior to the beginning of coal removal operations at the monitored mine. A comparision of the before and after levels of microearthquake occurrence indicated a sevenfold increase to about seven seismic events/hour that was attendant with the development of the time over the level of the background, non-coal-mining period seismicity.A total of over 15,000 microearthquakes were recorded during the monitoring period, most of which occurred during the actual coal-mining operations. The workday rate exceeded 30 seismic events/hour in contrast with the non-workday rate of about seven such events/hour. Rock and coal fracturing ahead of the mine plow are believed to be the primary cause of the majority of these very small seismic events. Cavings and rockbursts (violent eruptions that propel rock debris into the mine) also contributed to the total seismic activity. It appears that cavings, some of which were large enough to be felt on ground surface, are the primary source of the non-plowing related seismicity as larger free surface areas are opened underground. Any seismic activity premonitory to cavings, however, was effectively masked by the high workday rate. Thus, the use of surface seismic monitoring, in an attempt to document any increases of localized seismicity precursory to cavings, failed in this instance.The exact location of the mine and the survey dates are not given in this paper at the request of the mine operator.     

Thermochemical remanent magnetization in Jurassic silicic volcanics from Nevada,U.S.A.

Characteristic magnetizations from Middle Jurassic dacitic to andesitic subaerial volcanics (the Fulstone and Artesia Formations) in the Buckskin Mountain Range, western central Basin and Range Province, are well-grouped, generally display univectorial decays to the origin in demagnetization and have hematite blocking temperatures restricted almost entirely to above 620°C. Petrographic, rock magnetic and electron microprobe investigations confirm that nearly pure hematite is the essential magnetic phase (up to about 10 vol. %) occurring as a replacement of coarse titaniferous magnetite phenocrysts and fine groundmass particles, as a secondary alteration product of ferromagnesian phenocrysts and as a mobilized phase filling cracks and other open spaces. The presence of antipodal directions in each flow unit and in interbedded volcanoclastic units (some having retained magnetite as a major magnetic phase) and magnetite-dominated remanences in time-equivalent intrusives cutting the flows indicates that the volcanics acquired their hematite remanence, a faithful record of the geomagnetic field, in high-temperature, deuteric oxidation during and following their emplacement, not during a later thermal event such as regional metamorphism. The remanence is probably a thermochemical remanent magnetization, although part may be of thermoremanent origin.     

The enthalpy of the heat-carrying fluids and the energy of eruption of velican geyser, Kamchatka, U.S.S.R.

The enthalphy of the heat carrying fluids liquid water or mixture of water plus steam) which feeds the biggest Kamchatka geyser, Velican is obtained from the critical quantity of heat Qcritical, which is the net heat lost during the previous eruption and must be resupplied (stored) to trigger the next eruption. There are two unknowns in the heat balance equation for the geyser that cannot be determined from observations on the geyser in its natural state: critical and the enthalpy of the heat-carrying fluids I_o. In order to obtain a system of two equations for unambiguous determination of these parameters, we made temporary physical changes that affected the natural interval between geyser eruptions and constructed the heat balance equations for the different regimes (i.e., natural and induced intervals).The changes in interval of Velican geyser were achieved by changing the area of its surface pool, using dams. For geysers with large surface pool areas, the heat loss from the surface (mainly through evaporation) is of the same order and sometimes larger than the losses from discharge of hot water. The change of surface pool area for Velican geyser from 12 m² (in natural state) to 4.5 and 36.7 m² in experiments leads to changes of its interval from an average of 5 hours and 35 minutes in natural state to 4 hours and 59 minutes and 8 hours and 8 minutes, respectively. From the three independent equations of heat balance we obtained three sets cf values for the enthalpy, I_o and the critical energy, Qcritical, which differ from each other by less than 1%: I_o= 176 kcal/kg^*, Q_critical = 3.78 × 10⁶ kcal.The interval between eruptions of Velican geyser tends to change linearly with vent area (within our experimental range). The range or interval values (the difference between maximal and minimal periods) also depends linearly on vent area. These two systematics are due to the facts that the increase of vent surface area causes increased heat loss by evaporation, and that changes of external conditions (wind velocity, atmospheric pressure, and air temperature) greatly influence the geyser interval.In order to simplify comparison of intervals of eruption of different geysers or of the