Grain size,geochemistry and organic pollutants in modern fluvial deposits in eastern Moravia (Czech Republic)

Modern fluvial deposits from both small and large rivers were studied at 14 monitoring sites over 2 years (4 successive sampling seasons) in the area of eastern Moravia (Czech Republic). Grain size, geochemistry, content of persistent organic pollutants (PAHs, PCBs, HCHs, DDTs, HCBs and PeCB) and TOC were examined with the aim to understand their mutual relations and seasonal variations in sediment character and pollutant content. Sand and silt fraction predominate and the clay content is relatively low. Differences in provenance for various river systems were recognised. Both regional and seasonal variations in terms of content of persistent organic pollutants were documented. The content of TOC and mud was shown to play an important role in the accumulation of chlorinated persistent organic pollutants PCBs, HCHs, DDTs and HCB.     

Magnetic and Gravity Investigations of Lisan Peninsula-Dead Sea(Jordan)

The Lisan Peninsula is located within the Dead Sea basin which represents the plate boundary between African and Arabian plates. This basin constitutes a good example of a pull-apart basin because of its large dimensions, its structural simplicity and its active subsidence . The gravity data reveal that the Dead Sea basin can be divided into segments, each of them about 30 km long in N-S direction , where the Lisan Peninsula represents the deepest one (9 km thick Pleistocene sediments ), overlying about 6 km thick Mesozoic sediments . In addition , 20 km of extension was predicted along the Dead Sea basin, which indicates that the Dead Sea basin should be about 3.3 Ma in age . Furthermore, the Precambrian basement under the Lisan area is characterized by high susceptibility contrast that is related to continuous tectonic activity in the region.     

Halite oolites and ripples in the Dead Sea, Israel

Clastic features in recent halite deposits are observed along the beaches of an artificially dammed part of the Dead Sea. These features include halite oolites (termed halolites in this paper) and ripples. Halite precipitates initially either at the brine surface or on the floor. It is suggested that moderate increase of wave agitation shifts the balance towards brine-surface crystallization, and keeps the growing halite grains in constant motion. In this way rippled structures are formed. A further increase of wave energy leads to the growth of coated halite grains. The accumulation of the various halite grains along the beach, to form soft rippled floor and oolitic beach ridge is brought about during shoreward winds. During calm periods the bulk of the halite crystallizes directly on the floor. It develops into a hard crust which assumes the morphology of the substrate, including the ripple forms.     

The lithology and organic geochemistry of the Vendian deposits in the cis-Yenisei subprovince (from the results of the well Vostok-3)

We have studied for the first time the organic geochemistry of the Vendian thick section stripped by the parametric well Vostok-3 in the depth range 5002–3870 m in southeastern West Siberia. The results point to the aquagene–plankton–derived and bacterial nature of the buried organic matter (OM). At some depth levels, the deposits are enriched in OM (up to 0.7–9.6%). The study of kerogens has shown that the OM is transformed to the apocatagenesis stage. The composition of biomarker hydrocarbons in bitumens has been studied, and the geochemical criteria for the petroleum presence prediction are considered.     

Mineral composition of tephra layers in the Quaternary deposits of the Sea of Okhotsk:: Heavy minerals associations and their geochemistry

Heavy mineral associations from tephra layers in the Quaternary deposits of the Sea of Okhotsk and their chemical characteristics were studied by various techniques. It was shown that such investigations may have a bearing on the problems of tephrostratigraphic correlation. We assessed the possibility of application of the mineral composition of distal tephra for identification and, in particular, estimation of the relation of tephras to the explosive volcanism of back-arc and frontal zones of island arcs. The investigation of the compositions of minerals and use of mineral geothermometers and geobarometers (two-pyroxene, magnetite–ilmenite, and amphibole) provided evidence on the physicochemical parameters of melt crystallization during the explosive volcanic eruptions that produced the distal tephra layers. It was established that the pyroclastic material of some tephra layers was supplied during explosive eruptions not only from shallow magma chambers but also from deeper and higher temperature reservoirs. Together with the geochemical signatures of volcanic glasses, the obtained results on mineral associations and the geochemistry of mineral inclusions are applicable for the comparative analysis and correlation of tephras from marine and continental sequences, as well as for the identification of explosive volcanic products in adjacent land areas.     

Epithermal deposits in South China: Geology,geochemistry, geochronology and tectonic setting

South China Block (SCB) is the broad area including the Yangtze Craton in the northwest and Huanan Orogen in the southeast. It is an important epithermal metallogenic province in China, containing at least 1 high-sulfidation (HS) and 42 low-sulfidation (LS) Au-Ag ± Cu ± Pb-Zn ± Sb epithermal deposits. Porphyry-type mineralization was recognized in four of the LS deposits, and thus they were regarded as LS–P type. These 43 deposits are mainly located in: (1) the Lower Yangtze River Belt and (2) the Northeastern Jiangnan Orogenic Belt in the Yangtze Craton, (3) the Wuyi-Yunkai Orogenic Belt and (4) the Southeast Coastal Volcanic Belt in the Huanan Orogen. They are mostly located in Mesozoic volcanic basins, especially where the regional faults and their subsidiaries occurred. The host rocks include Jurassic–Cretaceous volcanic-sedimentary rocks, coeval or slightly older subvolcanic, granitoids and breccias, and metamorphic basement rocks. The alteration of the HS epithermal deposit (Zijinshan Cu-Au) zoned from silicic (vuggy quartz), through alunite, to dickite and phyllic alteration zones, from the ore veins outwards. The alteration of the LS deposits is zoned from adularia-chalcedony-bladed calcite (or quartz pseudomorphs after bladed calcite) in ore veins to distal illite-sericite-chlorite-kaolinite assemblages. For those LS–P systems, besides the dominated LS alteration assemblages, phyllic and potassium silicate alteration related to porphyry mineralization were identified. Acid leaching textures and vein, stockwork and breccia structures are common in HS deposit, while the LS epithermal deposits are characterized by open-space filling, crustifications, colloform banding and comb structures. The ore-forming fluids are low-temperature, low-salinity meteoric water-dominated in most epithermal deposits in SCB, with variable input of magmatic water. The ore components were derived from both the deep magma and host rocks, and transported upwards or laterally and precipitated in the fracture systems by fluid boiling, mixing and cooling. Most of the epithermal deposits are formed at depth of < 1.5 km and < 300 °C, with few exceptions containing porphyry-type mineralization, such as the Zhilingtou, Yinshan and Longtoushan deposits. Deep drilling is suggested in these deposits as more epithermal and/or porphyry mineralization could be expected. The mineral systems were formed in Early Yanshanian (180–130 Ma) and Late Yanshanian (120–90 Ma) periods. The Early Yanshanian epithermal ore systems are mainly located in a series of E–W-trending metallogenic belts to the west of the Lishui–Haifeng Fault, which were formed in a syn- or post-collision tectonic setting by the collision between the SCB and its surrounding plates. The Late Yanshanian epithermal deposits are mainly located in Southeast Coastal Volcanic Belt, genetically related to the westward subduction of the paleo-Pacific plate.     

U-series and oxygen isotope chronology of the mid-Pleistocene Lake Amora (Dead Sea basin)

This study establishes for the first time the chronology and limnological history of Lake Amora (Dead Sea basin, Israel), whose deposits (the Amora Formation) comprise one of the longest exposed lacustrine records of the Pleistocene time. The Amora Formation consists of sequences of laminated primary aragonite and silty-detritus, Ca-sulfate minerals, halite and clastic units. This sedimentary sequence was uplifted and tilted by the rising Sedom salt diapir, exposing ∼320 m of sediments on the eastern flanks of Mt. Sedom (the Arubotaim Cave (AC) section).The chronology of the AC section is based on U-disequilibrium dating (²³⁰Th-²³⁴U and ²³⁴U-²³⁸U ages) combined with floating δ¹⁸O stratigraphy and paleomagnetic constraints. The determination of the ²³⁰Th-²³⁴U ages required significant corrections to account for detrital Th and U. These corrections were performed on individual samples and on suites of samples from several stratigraphic horizons. The most reliable corrected ages were used to construct an age-elevation model that was further tuned to the oxygen isotope record of east Mediterranean foraminifers (based on the long-term similarity between the sea and lake oxygen isotope archives).The combined U-series-δ¹⁸O age-elevation model indicates that the (exposed) Amora sequence was deposited between ∼740 and 70 ka, covering seven glacial-interglacial cycles (Marine Isotope Stages (MIS) 18 to 5).Taking the last glacial Lake Lisan and the Holocene Dead Sea lacustrine systems as analogs of the depositional-limnological environment of Lake Amora, the latter oscillated between wet (glacial) and more arid (interglacial) conditions, represented by sequences of primary evaporites (aragonite and gypsum that require enhanced supply of freshwater to the lakes) and clastic sediments, respectively. The lake evolved from a stage of rapid shifts between high and low-stand conditions during ∼740 to 550 ka to a sabkha-like environment that existed (at the AC site) between 550 and 420 ka. This stage was terminated by a dry spell represented by massive halite deposition at 420 ka (MIS12-11). During MIS10-6 the lake fluctuated between lower and higher stands reaching its highest stand conditions at the late glacial MIS6, after which a significant lake level decline corresponds to the transition to the last interglacial (MIS5) low-stand lake, represented by the uppermost part of the Formation.δ¹⁸O values in the primary aragonite range between 6.0 and −1.3‰, shifting cyclically between glacial and interglacial intervals. The lowest δ¹⁸O values are observed during interglacial stages and may reflect short and intense humid episodes that intermittently interrupted the overall arid conditions. These humid episodes, expressed also by enhanced deposition of travertines and speleothems, seem to characterize the Negev Desert, and in contrast to the overall dominance of the Atlantic-Mediterranean system of rain patterns in the Dead Sea basin, some humid episodes during interglacials may be traced to southern sources.     

Asphalts, heavy oils, ozocerite and gases in the Dead Sea Basin

Solid, liquid and gaseous hydrocarbons occur throughout the Dead Sea Basin (Israel and Jordan) both in surface exposures and in drillings. The unaltered asphalts and heavy oils are characterized by very high sulfur content (ca. 11%) with δ³⁴S = +5% and δ¹³C = −28% to −29%, low content of n-paraffins, pristane to phytane ratio of 0.5 and by containing almost exclusively VO-porphyrins. The distribution of n-paraffins in samples from deep sources shows a smooth enveloped miximizing at C_15–20. Surface and shallow samples show clear evidence of biodegradation. The ozokerite, known only from the east side of the basin, is composed primarily of long chain n-paraffins with a maximum at C₃₉. The gases known from the southern margin of the basin are composed mostly of methane.The source for the bitumens is unknown. Two hypotheses are discussed. The first is that the asphalts and heavy oils represent an alteration products of crude oil which migrated into the basin or which might have been generated in the basin itself. The second hypothesis favors an origin from low temperature alteration of organic matter from a thermally immature source.     

Palynology,sedimentology and palaeoecology of the late Holocene Dead Sea

Palynological and sedimentological studies were performed at two Holocene profiles in erosion gullies (Ze’elim and Ein Feshkha) which dissect the retreating western shore of the Dead Sea. The aim of the project was to analyse possible links between climate, lithology, and vegetation development. The section in Ze’elim shows both lacustrine and fluvial sediments, whereas sedimentation at Ein Feshkha is predominantly lacustrine. The Ze’elim profile, previously used for paleo-lake reconstruction provides an opportunity to compare climate triggered lake levels as paleo-hydrological indicators and vegetation history by use of palynology. The vegetation development in Ze’elim and Ein Feshkha is influenced by both climate and human impact. The pollen record of Ze’elim begins in the Pottery Neolithic, the section of Ein Feshkha in the Late Bronze Age, both records end in the Middle Ages. The Ze’elim section is characterized by sedimentary hiati between the beginning of the Chalcolithic Period until the Middle Bronze Age and within the Late Bronze Age. Settlement periods during the Middle Bronze Age, Iron Age and Hellenistic–Roman–Byzantine Period are indicated by high values of anthropogenic indicators and/or Mediterranean trees. Collapses of agriculture, which can be related to climate effects, are evident during the Late Bronze Age, during the Iron Age and at the end of the Byzantine Period when the lake level curve indicates arid conditions. A comparison of the two pollen records, from different environments, illustrates a more prominent influence of Mediterranean vegetation and cultivated plants in the pollen diagram of Ein Feshkha. The southern Dead Sea region (at the desert fringe) is more vulnerable to regional climate change.     

Internal structure of the Dead Sea leaky transform (rift) in relation to plate kinematics

The structures along the Dead Sea transform (rift) are related to the motions of the Sinai and Arabia plates which border it, and to the irregularities of their boundaries. The total slip was 105 km left-lateral, but the present structures were formed mainly during the last 40 km of slip, which probably occurred in the Plio-Pleistocene. Along the southern half of the transform the strike-slip motion takes place on en-echelon faults. This produces rhomb-shaped grabens or pull-aparts, which are sometimes composite, and in which there is local crustal separation. Thus, much of the transform is “leaky”. These structures occur in a morpho-tectonic “rift-valley” delimited by normal faults, which express a small component of transverse extension. Along a few segments the shape of the transform is such that lateral motion produces local transverse compression. The geometric relations of the structures along the transform define an Eulerian pole of relative plate motions at 32.8° N 22.6° E ± 0.5°. The older motion was somewhat different and is described by a pole located about 5° west of the above. Then the component of transverse extension and crustal separation was much smaller than now, while local transverse compression was more important. The northern half of the Dead Sea transform has an irregular shape, and the bordering plates did not remain rigid as lateral motion continued. Here transverse compression is often important.     

Complex deposits in the Lo Gam structure,northeastern Vietnam: mineralogy,geochemistry, and formation conditions

The Pb–Zn deposits in the Lo Gam structure, northeastern Vietnam, account for>80% of all the Pb and Zn resources of Vietnam. All the deposits make up four isolated ore districts (Thai Nguyen, Cho Don, Cho Dien, Na Son), which can be combined in one metallogenic zone extending for >100 km from southeast to northwest. The Pb–Zn deposits in all the ore districts show some similarity to stratiform (Mississippi-type) deposits: confinement to Devonian carbonate sediments; localization at the intersection of faults of different orientations; vein and stockwork (pocket-vein-disseminated) morphology of the mineralized zones; evidence for hydrothermal-metasomatic formation (carbonate-rock marbleization, quartz–carbonate veins, etc.); and low and moderate mineralization temperatures (<250 °C). On the other hand, some differences from stratiform deposits are observed: widespread occurrence of Permo-Triassic igneous rocks in the above ore districts; absent tabular orebodies, which are typical of stratiform deposits; large set of trace elements (In, Bi, Sb, Au, Ag, Cu, Cd) not typical of stratiform deposits; and an endogenic primary source, as evidenced by the isotope composition of sulfur (δS³⁴= 2.68‰), which is close to meteoritic, and the set of trace elements, which are mainly of deep genesis. All this indicates that the above Pb–Zn deposits within the carbonate units are low-and moderate-temperature hydrothermal-metasomatic products associated with active magmatism which took place in this region in the Permo-Triassic.The differences in the mineral composition of the deposits, as well as in the trace-element set and contents at different deposits, clearly indicate an intricate ore formation process and the relation of the deposits with magmatism of different compositions. The simple mineral composition and the limited set of trace elements (Cd, Ag, Sb, As) at the Lang Hich deposit are closer to the characteristics of stratiform deposits. Also, manifestations of magmatism are almost absent here. On the contrary, unusually high (ppm) In (75.8), Sn (307.5), Cu (1080), Ag (157.7), Bi (99), and As (13,650) contents were observed at the deposits of the Cho Don and Cho Dien districts, with widespread granitoid magmatism in the Phia Bioc complex. Rare-earth mineralization (orthite) and high Mo, Re, and Rb contents at the deposits of the Na Son district are probably due to the widespread occurrence of stratified alkaline volcanics and their subvolcanic analogs, which belong to the Pla Ma complex (ξγPZ₂ pm).     

The role of fluids in faulting deformation:a case study from the Dead Sea Transform (Jordan)

The geochemistry of carbonate fault rocks has been examined in two areas of the Arava Fault segment, which forms the major branch of the Dead Sea Transform between the Dead Sea and the Gulf of Aquaba. The role of fluids in faulting deformation in the selected fault segment is remarkably different from observations at other major fault zones. Our data suggest reduced fluid rock interactions in both areas and limited fluid flow. The fault did not act as an important fluid conduit. There are no indications that hydrothermal reactions (cementation, dissolution) did change the strength and behavior of the fault zone, although the two areas show considerable differences with respect to fluid sources and fluid flow. In one area, the investigated calcite mineralization reveals an open fluid system with fluids originating from a variety of sources. Stable isotopes (¹³C, ¹⁸O), strontium isotopes, and trace elements indicate both infiltration of descending (meteoric and/or sea water) and ascending hydrothermal fluids. In the other area, all geochemical data indicate only local (small scale) fluid redistribution. These fluids were derived from the adjacent limestones under nearly closed-system conditions.     

Palynology, geochemistry, and thermal history of the shales associated with the Küre massive sulfide deposits (northern Turkey)

The relationship between the palynology and geochemistry of the shales associated with the Küre massive sulfide deposits in the Kastamonu Province, northern Turkey, has been studied. SEM seems to be the most effective method to study the palynology of fusinitic particulate organic matter in these thermally-altered sedimentary rocks. Major thermal maturation indicators obtained from the organic and inorganic fractions of the shales and mineral geothermometers of the orebodies suggest that the shales indicate much lower temperatures that the ore and therefore were deposited after the formation of the massive sulfide ores in the area of study.     

The permeability of fault zones: a case study of the Dead Sea rift (Middle East)

Fault zone architecture plays an important role in flow regimes of hydrological systems. Fault zones can act as conduits, barriers, or conduits/barrier systems depending on their spatial architecture. The goal of this study is to determine the fault-zone permeability structure and its effect on the local hydrogeological system in the Dead Sea fault system. Permeability was measured on small-scale outcrop plug samples at four faults along the Dead Sea fault system, and large-scale slug tests in four boreholes, in different parts of the fault, at Yair fault in Israel. The research results show that values in the damage zone are two to five orders of magnitude higher than those of the fault core (~3.5?×?10^?10, 1?×?10^?15 m² respectively), resulting in an anisotropic permeability structure for the overall fault zone and preferable flow parallel to the fault. A set of injection tests in the Yair fault damage zone revealed a water-pressure-dependent behavior. The permeability of this zone increases when employing a higher water pressure in the fault fracture-dominated damage zone, due to the reopening of fractures.     

Sedimentology,geochemistry, and biota of Volgian carbonaceous sequences in the northern part of the central Russian Sea (Kostroma region)

Lithological, geochemical, stratigraphic, and paleoecological features of carbonaceous sediments in the Late Jurassic Volgian Basin of the East European Platform (Kostroma region) are considered. The shalebearing sequence studied is characterized by greater sedimentological completeness as compared with its stratotype sections in the Middle Volga region (Gorodishche, Kashpir). Stratigraphic position and stratigraphy of the shale-bearing sequence, as well as the distribution of biota in different sedimentation settings, are specified. It is shown that Volgian sediments show a distinct cyclic structure. The lower and upper elements of cyclites consist of high-carbonaceous shales and clayey-calcareous sediments, respectively, separated by transitional varieties. Bioturbation structures in different rocks are discussed. Microcomponent composition and pyrolytic parameters of organic matter, as well as distribution of chemical elements in the lithologically variable sediments are analyzed. Possible reasons responsible for the appearance of cyclicity and accumulation of organicrich sediments are discussed.     

Groundwater vulnerability assessment and evaluation of human activity impact (HAI) within the Dead Sea groundwater basin,Jordan

Groundwater vulnerability to contamination was determined within the Dead Sea groundwater basin, Jordan, using the DRASTIC model and evaluation of human activity impact (HAI). DRASTIC is an index model composed of several hydrogeological parameters and, in this study, the recharge parameter component was calculated as a function of rainfall, soil permeability, slope percentage, fault system, and the intersection locations between the fault system and the drainage system, based on the hydrogeologic characteristics of hard-rock terrain in an arid region. To evaluate the HAI index, a land use/cover map was produced using an ASTER VNIR image, acquired for September 2004, and combined with the resultant DRASTIC model. By comparing the DRASTIC and HAI indices, it is found that human activity is affecting the groundwater quality and increasing its pollution risk. The land use/cover map was verified using the average nitrate concentrations in groundwater associated with land in each class. A sensitivity analysis was carried out in order to study the model sensitivity. The analyses showed that the depth to water table and hydraulic conductivity parameters have no significant impact on the model, whereas the impact of vadose zone, aquifer media, and recharge parameters have a significant impact on the DRASTIC model.     

Messinian palaeoclimate and palaeo-environment in the western Mediterranean realm: insights from the geochemistry of continental deposits of NW Sardinia (Italy)

To evaluate the palaeo-environmental parameters of a portion of the Sardinia–Corsica microplate during the Messinian drop in sea level, we examined the chemistry and mineralogy of upper Tortonian–lower Messinian (late Miocene) clayey continental deposits from NW Sardinia. Differences exist between the uppermost part of the succession, which is devoid of carbonate phases, and the lower part, reflecting changes in provenance and climate. The carbonate-free samples were probably derived from quartzite of the metamorphic basement and were deposited under a climate characterized by alternating dry and relatively wet periods. The other samples were derived from basement phyllite and were deposited under a warm, dry climate that promoted the capillary rise of Ca²⁺ and bicarbonate from a shallow water table, and therefore, the precipitation of carbonate. This part of the succession contains both calcite and dolomite. The presence of barite indicates an important concentration of SO₄ ^2? in the solution from which the CaMg(CO₃)₂ precipitated. The formation of dolomite under hypersaline conditions may be explained by bacterial degradation of organic matter, which produced CO₂ and ammonia, thereby increasing the solution alkalinity. The succession formed in an oxic environment, except for a calcite-rich level that formed under relatively reducing conditions. For this level, the large amount of calcite and the lack of dolomite indicate an alkaline environment and a very low Mg²⁺/Ca²⁺ ratio in the soil solution. These observations, coupled with the reducing conditions, indicate the availability of large amounts of degraded organic matter, probably related to a period typified by a wetter climate.     

Hydrochemistry of aquifers in the southern Dead Sea area,southern Jordan

 The demand for water resources in the area south of the Dead Sea due to continued development, especially at the Arab Potash Company (APC) works necessitates that water quality in the area be monitored and evaluated based on the local geology and hydrogeology. The objective of this paper is to provide information on the past and present status of the main aquifers under exploitation or planned for future development. Two main aquifers are discussed: the Safi water field, presently being operated, and the Dhiraa water field, which is being developed. The aquifer developed in the Safi water field is shallow and fed by the Hasa fault system, which drains a significant portion of the Karak mountains. This aquifer seems to be well replenished within the core, where no obvious long-term degradation in water quality can be identified. However, in the low recharge areas within the distal portions of the alluvial fan, there has been a degradation in water quality with time. The degradation is caused by the dissolution of the Lisan Marl, which is present at the outskirts of the fan system, based on hydrochemistry of water in the wells. The Dhiraa field is a deep (800–950 m) aquifer drilled specifically for the extraction of brackish water present in the Kurnub aquifer. Available data indicate that there are at least three distinct water types within this field. These water types are variable in quality, and there may be potential for mixing of these waters, thus affecting the quality of the freshest waters presently available. Tritium and oxygen isotope analysis indicate that the water is old and possibly nonrenewable. Received: 24 July 1995 · Accepted: 26 September 1995     

Deep-water resedimentation of anhydrite and gypsum deposits in the Middle Miocene (Belayim Formation) of the Red Sea, Egypt

The Middle Miocene evaporites in the Red Sea rift were deposited within a complex system of fault-bounded basins that were episodically active during sedimentation. Such a tectonic framework is known to be highly favourable to resedimentation processes. An offshore petroleum well in the north-western Red Sea has cored, below a massive salt unit, an anhydrite-bearing succession which provides an excellent opportunity to study the processes of gravity induced redeposition of Ca-sulphates in a deep basin. Anhydrite deposits, interbedded with siliciclastic layers and thin halite layers, are composed of resedimented facies ranging from fine-grained laminated sediments to coarse-grained breccias. The components derive from the reworking of shelf sediments deposited initially in shallow water to supratidal settings on the surface and edges of structural highs bordering depressions: proximal siliciclastic deposits with interstitial anhydrite (cement patches, nodules) or gypsum and dolostones with early diagenetic anhydrite facies (nodular, chicken-wire) formed in sabkha conditions, interstitially grown gypsum crystals and subaqueous gypsum crusts precipitated in hypersaline ponds, and diatom-rich oozes formed in marine, shallow-water conditions. The homogeneity of the stable isotope composition and petrography of sulphates argue for the initial crystallization of Ca-sulphates within brines of the same origin and in closely interconnected sedimentary settings. The unconsolidated sediments redeposited as slope-foot accumulations were carried both as anhydrite (nodules, soft masses, various fragments, individual grains or crystals released by disintegration of large masses) and gypsum (crystalline aggregates or single crystals) later converted to anhydrite during burial. Layers of chaotic breccia are interpreted as the result of seismic events, whereas the fine-grained deposits could be related to redistribution by nepheloid layers of suspensions of finer grains released by disintegration of the soft anhydrite masses during downslope transport, or of in situ deposits removed by the turbiditic flows.